| Age | Commit message (Collapse) | Author |
|---|
|
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <[email protected]> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <[email protected]> #TI boards
Acked-by: Yao Zi <[email protected]> #TH1520
Signed-off-by: Peng Fan <[email protected]>
|
|
Add a bitfield which tracks when bootmeths have been used. This will be
needed when global bootmeths can be used later in the iteration.
Fix a missing bootflow_free() while here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The current 'doing_global' refers to being in the state of processing
global bootmeths. Since global bootmeths are currently used once at the
start, it becomes false once the last global bootmeth has been used.
In preparation for allowing bootmeths to run at other points in the
bootstd interation, add a new 'have_global' flag which tracks whether
there are any global bootmeths in the method_order[] list. It is set up
when iteration starts. Unlike doing_global which resets back to false
after the global bootmeths have been handled, once have_global is set to
true, it remains true for the entire iteration process. This provides a
quick check as to whether global-bootmeth processing is needed.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a few comments about global bootmeths and first_glob_method
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
|
|
There is no such thing as struct bootmeth, it's probably a typo. This
issue doesn't affect the execution as it's a pointer, and pointer sizes
are the same for all data types. But it can be confusing, so make it
struct udevice, as it should be.
Fixes: a950d31abe98 ("bootstd: Add the bootmeth uclass and helpers")
Signed-off-by: Sam Protsenko <[email protected]>
|
|
Specifying efi_mgr in 'bootmeths' environment variable leads to NULL
pointer dereference when 'bootflow scan' is executed, with call trace
like this:
priv->fake_dev // NULL pointer dereference
.read_bootflow = efi_mgr_read_bootflow()
bootmeth_get_bootflow()
bootflow_check()
bootflow_scan_first()
do_bootflow_scan()
'bootflow scan -l'
That happens because in case when 'bootmeths' env var is defined the
bootmeth_efi_mgr driver is not probed, and the memory for its private
data isn't allocated by .priv_auto. In case when 'bootmeths' env var is
not defined, the std->bootmeth_count is 0, and the execution flow in
bootmeth_setup_iter_order() takes "no ordering" path, which in turn runs
uclass_get_device_by_seq() -> ... -> device_probe(), so issue isn't
present there. But when 'bootmeths' is defined and contains efi_mgr, the
std->bootmeth_count > 0, so bootmeth_setup_iter_order() follows the "we
have an ordering" path, where devices are not probed. In other words:
'bootmeths' defined 'bootmeths' not defined
--------------------------------------------------------
priv == NULL priv != NULL
^ ^
| device_alloc_priv()
no probe device_of_to_plat()
^ device_probe()
| uclass_get_device_tail()
dev = order[i] uclass_get_device_by_seq()
^ ^
| have an ordering | no ordering
+----------------+---------------+
|
bootmeth_setup_iter_order()
bootflow_scan_first()
do_bootflow_scan()
Add an explicit device_probe() call in "we have an ordering" case to fix
the issue.
Fixes: c627cfc14c08 ("bootstd: Allow scanning for global bootmeths separately")
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Free memory allocated for 'order' (array of bootmeths) on error paths in
bootmeth_setup_iter_order() function.
Fixes: c627cfc14c08 ("bootstd: Allow scanning for global bootmeths separately")
Fixes: 10d16faa436c ("bootstd: Detect empty bootmeth")
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Update this function to add the image to the list.
Signed-off-by: Simon Glass <[email protected]>
|
|
We want to record the type of each file which is loaded. Add an new
parameter for this, to the read_file() method. Update all users.
Make bootmeth_common_read_file() store information about the image that
is read.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
As a first step to recording images and where they came from, update
this function to do so, since it is used by two bootmeths
Create a helper function in the bootflow system, since recorded
images are always associated with bootflows.
Signed-off-by: Simon Glass <[email protected]>
|
|
We have previously added logic to allow a "fallback" option to be
specified in the extlinux configuration. Provide a command that allows
us to set this as the preferred default option when booting.
Combined with the bootcount functionality, this allows the "altbootcmd"
to provide a means of falling back to a previously known good state
after a failed update. For example, if "bootcmd" is set to:
bootflow scan -lb
We would set "altbootcmd" to:
bootmeth set extlinux fallback 1; bootflow scan -lb
Causing the boot process to boot from the fallback option.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Martyn Welch <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from all "boot/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Some bootflows (such as EFI and ChromiumOS) delay reading the kernel until
it is needed to boot. This saves time when scanning and avoids needing to
allocate memory for something that may never be used.
To permit reading of these files, add a new 'bootflow read' command.
Signed-off-by: Simon Glass <[email protected]>
|
|
This function is used in some bootmeth implementations. Export it.
Signed-off-by: Simon Glass <[email protected]>
|
|
This is a copy error. Fix it.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
This functionality current sits in bootstd, but it is more generally
useful. Add a function to load a file into memory, allocating it as
needed. Adjust bootstd to use this version.
Note: Tests are added in the subsequent patch which converts the 'cat'
command to use this function.
Signed-off-by: Simon Glass <[email protected]>
|
|
In a few cases the error handling is not quite right. Make sure we
return the actual error in distro_efi_read_bootflow_file() rather than
-EINVAL. Return -IO when a file cannot be read. Also show the error name
if available.
This does not change operation, but does make it easier to diagnose
problems.
Signed-off-by: Simon Glass <[email protected]>
|
|
Normally the bootmeth driver reads the bootflow from the bootdev, since
it knows the correct way to do it.
However it is easier for some bootdevs to handle this themselves. For
example, reading from SPI flash is quite different from other devices.
Add a way for the bootdev to pass a bootflow to the bootmeth, so that
this can be supported.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some operating systems provide a logo in bmp format. Read this in if
present so it can be displayed in the menu.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a function to init a bootflow, to reduce code duplication.
Signed-off-by: Simon Glass <[email protected]>
|
|
Typically we want to find and use global bootmeths first, since they have
the best idea of how the system should boot. We then use normal bootmeths
as a fallback.
Add the logic for this, putting global bootmeths at the end of the
ordering. We can then easily scan the global bootmeths first, then drop
them from the list for subsequent bootdev-centric scans.
This changes the ordering of global bootmeths, so update the
bootflow_system() accordingly.
Drop the comment from bootmeth_setup_iter_order() since this is an
exported function and it should be in the header file.
Signed-off-by: Simon Glass <[email protected]>
|
|
The current way of handling things like EFI bootmgr is a bit odd, since
that bootmeth handles selection of the bootdev itself. VBE needs to work
the same way, so we should support it properly.
Add a flag that indicates that the bootmeth is global, rather than being
invoked on each bootdev. Provide a helper to read a bootflow from the
bootmeth.
Signed-off-by: Simon Glass <[email protected]>
|
|
Some bootmeths can provide information about what is available to boot.
For example, VBE simple provides access to the firmware state.
Add a new method for this, along with a sandbox test.
Signed-off-by: Simon Glass <[email protected]>
|
|
If the ordering produces no entries, this is an error. Report it, so that
the caller doesn't try to continue with a NULL bootmeth.
This fixes a crash in the bootflow_iter test when running with the sandbox
'default' device tree, instead of the required 'test' one.
Signed-off-by: Simon Glass <[email protected]>
|
|
A bootmeth is a method of locating an operating system. For now, just
add the uclass itself. Drivers for particular bootmeths are added later.
If no bootmeths devices are included in the devicetree, create them
automatically. This avoids the need for boilerplate in the devicetree
files.
Signed-off-by: Simon Glass <[email protected]>
|
