summaryrefslogtreecommitdiff
path: root/configs/MPC837XERDB_defconfig
AgeCommit message (Collapse)Author
8 dayssata: Rework the CMD_SATA and SATA symbolsTom Rini
Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini <[email protected]>
2024-08-13MPC837XERDB: ethernut5: work_92105: Drop CMD_DATESimon Glass
These use pre-driver model code and it is several years since the migration deadline. Disable the 'date' command so that this old code can be removed. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2024-01-22mtd: Make CONFIG_MTD be the gate symbol for the menuTom Rini
The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <[email protected]>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-05-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-05-01mpc83xx: Don't allow W and G bits in IBATsChristophe Leroy
The "Programming Environments Manual for 32-Bit Implementations of the PowerPC™ Architecture" says "W and G bits are not defined for IBAT registers. Attempting to write to these bits causes boundedly-undefined results" The "e300 Power Architecture™ Core Family Reference Manual" says the same: "Neither the W or G bits of the IBAT registers should be set. Attempting to write to these bits causes boundedly-undefined results." Remove the possibility to set those bytes. Fixes: 30915ab95d9 ("mpc83xx: Migrate BATS config to Kconfig") Signed-off-by: Christophe Leroy <[email protected]> Cc: Mario Six <[email protected]>
2023-04-25mpc8379erdb: Convert to using DM_SERIALSinan Akman
Convert to DM_SERIAL for mpc8379erdb. Signed-off-by: Sinan Akman <[email protected]>
2023-03-06powerpc, mpc83xx: Remove CONFIG_ELBC_BRx_ORxChristophe Leroy
Commit fe7d654d04 ("mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig") converted CONFIG_SYS_{BRx/ORx}_PRELIM to Kconfig by implementing a fine-grained selection of every bit in Kconfig. But commit c7fad78ec0 ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig") reworked it so that you now just have to provide the raw value of each register in Kconfig. However, all fine-grained Kconfig items remained allthough they are not used anymore. Remove them all. Fixes: c7fad78ec0 ("Convert CONFIG_SYS_BR0_PRELIM et al to Kconfig") Signed-off-by: Christophe Leroy <[email protected]>
2022-12-22Convert CONFIG_HOSTNAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FSL_ESDHC_PIN_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_ESDHC_PIN_MUX Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_VSC7385_ENET et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_VSC7385_ENET CONFIG_VSC9953 Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_RTC_DS1337 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RTC_DS1337 CONFIG_RTC_DS1337_NOOSC CONFIG_RTC_DS1338 CONFIG_RTC_DS1374 CONFIG_RTC_DS3231 CONFIG_RTC_MC13XXX CONFIG_RTC_MXS CONFIG_RTC_PT7C4338 Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_FSL_SERDES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_SERDES Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <[email protected]>
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-10Convert CONFIG_SYS_LOADS_BAUD_CHANGE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_LOADS_BAUD_CHANGE CONFIG_LOADS_ECHO As part of this, we move CMD_SAVES to be after CMD_LOADS as they are logically related (load or save an s-record format file) and this makes grouping of CONFIG_SYS_LOADS_BAUD_CHANGE easier. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-10Convert CONFIG_SYS_INIT_RAM_LOCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_INIT_RAM_LOCK Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_SYS_MAX_FLASH_SECT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAX_FLASH_SECT Signed-off-by: Tom Rini <[email protected]>
2022-08-04Convert CONFIG_SYS_FLASH_EMPTY_INFO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FLASH_EMPTY_INFO Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-04-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-04-01MPC837XERDB: Move CONFIG_PCIE to KconfigTom Rini
Move this symbol to the board Kconfig file. Signed-off-by: Tom Rini <[email protected]>
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <[email protected]>
2022-03-03Convert CONFIG_BOOTP_MAY_FAIL et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_VENDOREX CONFIG_BOOTP_BOOTFILESIZE CONFIG_BOOTP_NISDOMAIN CONFIG_BOOTP_TIMEOFFSET Cc: Ramon Fried <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-03-03Convert CONFIG_BOOTFILE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTFILE Signed-off-by: Tom Rini <[email protected]>
2022-02-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py and update scripts/pylint.base Signed-off-by: Tom Rini <[email protected]>
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2022-02-09sata: Rearrange Kconfig for SATASimon Glass
Move the SATA options inside an 'if SATA' part, so they are grouped. Fix the 'Complient' typo while we are here. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-12-27Convert CONFIG_SYS_PCI_64BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PCI_64BIT Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <[email protected]>
2021-12-01Convert CONFIG_SYS_BR0_PRELIM et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_BR0_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR3_PRELIM CONFIG_SYS_OR3_PRELIM CONFIG_SYS_BR4_PRELIM CONFIG_SYS_OR4_PRELIM CONFIG_SYS_BR5_PRELIM CONFIG_SYS_OR5_PRELIM CONFIG_SYS_BR6_PRELIM CONFIG_SYS_OR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_OR7_PRELIM This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms that can set these values do so. Add the relevant SYS_BRx_PRELIM_BOOL to platforms that had not been previously migrated. Signed-off-by: Tom Rini <[email protected]>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-30i2c: fsl_i2c: Migrate to KconfigTom Rini
- As there are no boards that use different values for speed / slave on different buses, use a single option. - Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options. - Introduce _HAS_ options for additional buses as only the first one is common to all users. - Convert all remaining symbols to Kconfig. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-07-06mpc8379erdb: enable DM_USB DM_PCI DM_ETHSinan Akman
Signed-off-by: Sinan Akman <[email protected]>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-05-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-03-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-02-21mpc8379erdb: Convert to DM_MMCSinan Akman
Signed-off-by: Sinan Akman <[email protected]>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <[email protected]> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <[email protected]>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <[email protected]>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] Signed-off-by: Tom Rini <[email protected]> Acked-by: Joe Hershberger <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2019-05-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-11 17:40:13 +0000