summaryrefslogtreecommitdiff
path: root/configs/amd_versal2_virt_defconfig
AgeCommit message (Collapse)Author
2026-05-11configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2026-04-23amd: versal2: Enable PCIe/NVMe support and add NVMe boot targetPranav Sanwal
Enable the AMD Versal Gen 2 DW PCIe host controller and NVMe storage in the virtual platform defconfig: - CONFIG_PCI / CONFIG_CMD_PCI: core PCI stack and pci command - CONFIG_PCIE_DW_AMD: AMD Versal Gen 2 PCIe host driver - CONFIG_NVME_PCI: NVMe-over-PCIe storage driver - CONFIG_CMD_LSBLK: block device listing command - CONFIG_DM_PCA953X: GPIO expander driver for PERST# control Add BOOT_TARGET_DEVICES_NVME to amd_versal2.h so NVMe is included in the distro boot target list when CONFIG_NVME is enabled. Signed-off-by: Pranav Sanwal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2026-03-27Merge tag 'xilinx-for-v2026.07-rc1-v2' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next AMD/Xilinx/FPGA changes for v2026.07-rc1 v2 Kconfig: - Correct XILINX_TIMER entry - Rework TARGET_MICROBLAZE_GENERIC - Fix CPU_MICROBLAZE PVR logic - Remove non existing SPL_BINMAN_FDT i2c: - Wire pca9848 support spi/cadence-qspi: - Disable DAC mode - Do reset pulse net/gem: - Disable broadcast packets - Clear TXSR transfer complete - Add support for dma-coherent versal2: - Enable GIC600 support - Fix UFS distro boot wiring
2026-03-23xilinx: Enable GPIO delay driver on Versal platformsMichal Simek
GPIO delay driver is necessary to use to extend delay times for USB hubs. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/6744d3a93f48658178a53d218a4a6ca2fbb050dd.1771325431.git.michal.simek@amd.com
2026-03-23scmi: Rework SCMI_FIRMWARE implementationTom Rini
As exposed by "make randconfig", how we have SCMI_FIRMWARE today is incomplete, and in one case, used incorrectly. First, SCMI_FIRMWARE has a build-time dependency on OF_CONTROL being enabled, so add that. Second, RESET_SCMI depends on SCMI_FIRMWARE being enabled, it should not select that symbol. In turn, a number of platforms need to now enable SCMI_FIRMWARE explicitly and not rely on RESET_SCMI to enable it for them. Signed-off-by: Tom Rini <[email protected]> Acked-by: Peng Fan <[email protected]> Acked-by: Anshul Dalal <[email protected]> Acked-by: Michal Simek <[email protected]> # Versal Gen 2 Reviewed-by: Patrice Chotard <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2026-02-13xilinx: Enable NFS support for all Xilinx platformsPranav Tilak
Enabled the default utilization of the NFS command on all Xilinx platforms to facilitate booting images through the network using the NFS protocol. Signed-off-by: Pranav Tilak <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2025-12-19arm64: versal2: Enable reset and poweroff via sysreset frameworkVenkatesh Yadav Abbarapu
reset and poweroff are called via hooks in psci driver which is going around sysreset framework that's why enable sysreset drivers and do reset and poweroff via this framework. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/a0b13b17fbf99fd16341b68b649ec08ef2b3536a.1764170621.git.michal.simek@amd.com
2025-12-19arm64: versal2: Update the text base and dtb addressVenkatesh Yadav Abbarapu
Update the TEXT_BASE and DTB address as per the new memory map. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/6c6eeab25c8bc8739127fb40e1a941920d04fc77.1764170621.git.michal.simek@amd.com
2025-12-19arm64: versal2: Enable USB5744 usb hubMichal Simek
USB hub is available on the first evaluation board called vek385. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/4cd72e28bc0e2a9720fe5481dcab2e923d708b34.1764170621.git.michal.simek@amd.com
2025-12-19xilinx: amd: Enable the PCA9541 I2C Bus arbiterMichal Simek
Enable the new PCA9541 i2c bus arbiter on AMD/Xilinx SOCs by default. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/edfb7e7a6e800484d3ac3bf45a4f83adfcdd1754.1764170621.git.michal.simek@amd.com
2025-12-19clk: versal: Enable clock driver for Versal Gen 2Michal Simek
Versal Gen 2 is using enhancement SMC format but in near future SCMI client should be used. This patch is just bridging this gap till SCMI server is fully tested. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/e83c665408d1453a464dd02cd2a25bb0ed267131.1762788250.git.michal.simek@amd.com
2025-10-09xilinx: Enable SNTP/DATE commands and RTCMichal Simek
Enable SNTP/DATE commands on all Xilinx boards. Also enable RTC_EMULATION driver for platforms which don't have physical RTC. Enabling DM_RTC is enabling by default also CMD_DATE. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/2605b1618a311efe4f35442c34e7cec973060630.1759393175.git.michal.simek@amd.com
2025-10-09xilinx: Replace PHY_VITESSE by PHY_MSCCMichal Simek
Enable MSCC phy driver instead of VITESSE. Vitesse driver is much older and is on the way out that's why switch to MSCC driver which covers VSC8531 which is used on one Versal board. Reviewed-by: Tom Rini <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/0a441e488a29bd1c93677a6f63a4a04a3cc1c9f5.1759216164.git.michal.simek@amd.com
2025-09-26arm: Change SYS_INIT_SP_BSS_OFFSET from int to hexMichal Simek
The most of OFFSET values are in hex instead of int which is easier for layout description. Signed-off-by: Michal Simek <[email protected]>
2025-07-08config: versal2: Update timer clock to 100MhzVenkatesh Yadav Abbarapu
U-Boot timer clock is not updated when it is migrated from emulator to silicon. Update CONFIG_COUNTER_FREQUENCY to 100Mhz. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-07-08arm64: versal2: Enable reset and poweroff via sysreset frameworkVenkatesh Yadav Abbarapu
reset and poweroff are called via hooks in psci driver which is going around sysreset framework that's why enable sysreset drivers and do reset and poweroff via this framework. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-07-08config: amd: Enable the SPI_STACKED_PARALLEL config optionVenkatesh Yadav Abbarapu
Enable the SPI_STACKED_PARALLEL config option for AMD versal2 platform, as this is required for parallel and stacked memories. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-06-20Merge patch series "Consistent Kconfig environment options CONFIG_ENV_ prefix"Tom Rini
Marek Vasut <[email protected]> says: Rename the environment related variables and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Link: https://lore.kernel.org/r/[email protected]
2025-06-20env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDRMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Reviewed-by: Tom Rini <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2025-06-20env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANTMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Signed-off-by: Marek Vasut <[email protected]>
2025-06-09configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2025-04-16arm64: versal2: Remove dtb reselect and multi dtbPadmarao Begari
Presently the multi dtb's are not using on versal Gen 2 platform, so remove CONFIG_DTB_RESELECT and CONFIG_MULTI_DTB_FIT from defconfig. Signed-off-by: Padmarao Begari <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-04-16amd: versal2: Add support for saving env based on bootmodeVenkatesh Yadav Abbarapu
Enable saving variables to MMC(FAT) and SPI based on primary bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE). Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal Gen 2 platform. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-04-16arm64: versal2: Update the number of DRAM banks to 36Venkatesh Yadav Abbarapu
HBM stands for high bandwidth memory and is a type of memory interface used in 3D-stacked DRAM (dynamic random access memory) in some AMD GPUs (aka graphics cards), as well as the server, high-performance computing (HPC) and networking and client space. High Bandwidth Memory(HBM) has total 16 channels, one channel is divided into two pseudo channels which makes its 32 banks each with some amount of memory. And then we have DDR_LOW PS low, DDR_HIGH0 PS high, DDR_HIGH1 PS very high and pretty much there should be also place for PL DDR. So maximum number of memory banks will be 36, updating the CONFIG_NR_DRAM_BANKS to 36. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-04-16amd: versal2: Enable NVMEM frameworkMichal Simek
Enable NVMEM framework to be able to for example read MAC address from eeprom. For more information please look at commit 5db5b7e2a336 ("xilinx: Enable NVMEM framework for all platforms"). Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/b6714165aee393528812ddbfc3cd18a3bbcf202e.1744270647.git.michal.simek@amd.com
2025-04-16amd: versal2: Enable SMBIOS commandMichal Simek
Enabel SMBIOS command as was done by commit aa815e6c7603 ("xilinx: Enable SMBIOS command") for our other platforms. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/c1e236003c6ec250dbcc5178c873c171fffccd29.1744270535.git.michal.simek@amd.com
2025-04-16arm64: versal2: Add PL bit stream load supportPrasad Kummari
Add support for loading the secure & non-secure pdi images and PL bitstream on the Versal Gen2 platform. The FPGA driver is enabled to load the bitstream in PDI format on the AMD Versal Gen2 device. PDI is the new programmable device image format for Versal Gen2, and the bitstream for the Versal Gen2 platform is generated exclusively in this format. With the enhanced SMC format in TF-A ensuring transparent payload forwarding for Versal Gen2, the u-boot driver must now handle the word swapping of PDI address that was previously done in TF-A for this API. The source code for the Versal2 loadpdi command and the CONFIG_CMD_VERSAL2 configuration has been removed. It now utilizes the fpga load <dev> <address> <length> command to load secure & non-secure pdi images. Signed-off-by: Prasad Kummari <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-04-16arm64: versal2: Update the text base and dtb addressVenkatesh Yadav Abbarapu
Update the TEXT_BASE and DTB address as per the new memory map. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/3ffb6f1f7ff418f01ccc2eccf8a834441f9f0b74.1742461498.git.michal.simek@amd.com
2025-04-16arm64: versal2: Disable debug consoleMichal Simek
Platforms can use uart0, uart1, dcc or even any other console that's why disable debug console. It should be used for debugging purpose only. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/aa122482cf5b32ded4497469cac1829c6944f0fa.1741868926.git.michal.simek@amd.com
2025-04-16amd: versal2: Enable reset and power domain driversVenkatesh Yadav Abbarapu
Enable power domain driver to request node for all the IP's that are enabled in DT. Add CONFIG_RESET_ZYNQMP config in versal2 default configuration to enable support for reset driver for versal2 platform. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-03-05xilinx: Remove tftp block size 4096Padmarao Begari
The zynqmp gem driver support max MTU size 1536, so remove tftp block size 4096 from defconfig and use default tftp block size. Fixes: a33b4b96b3cf ("xilinx: Enable MBEDTLS/LWIP/WGET and WGET_HTTPS") Signed-off-by: Padmarao Begari <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2025-02-05xilinx: Enable MBEDTLS/LWIP/WGET and WGET_HTTPSMichal Simek
Enable lwip and https on our platforms to be able to use it in a boot. Acked-by: Ilias Apalodimas <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/cb05adaf0758c2c4f1361f8665169897493638e7.1738164681.git.michal.simek@amd.com
2025-02-05xilinx: Enable meminfo command with mappingMichal Simek
Enable meminfo command to be able to see where things are mapped. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/b7f9f5e18e16a945277d4b8cfde5a7f057e77676.1737976295.git.michal.simek@amd.com
2025-02-05xilinx: Enable mkfwumdata tool for a/b updateMichal Simek
Build mkfwumdata tool by default for building ab mdata structure. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/6d82c9a2db30e12ea17fa125c68a555d7f070851.1737723845.git.michal.simek@amd.com
2025-02-05arm64: versal2: Enable the OPTEE commandVenkatesh Yadav Abbarapu
Enable the command OPTEE which runs the basic 'hello world ta'. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2024-11-29configs: versal2: Enable OPTEE supportVenkatesh Yadav Abbarapu
Add OPTEE support for versal2 platform. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2024-11-12configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-10-14configs: versal2: Add support for AMD UFS platform driverVenkatesh Yadav Abbarapu
Enable AMD UFS platform driver. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Acked-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-09-20xilinx: Enable SIMPLE_PM_BUSMichal Simek
Enable simple-pm-bus driver to handle case where axi bus coming between PS (fixed) part to PL (programmable) part has own clock or power domain. That's why enable driver to be ready for this configuration. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/b9f4bb85be502616edf3be2b79e52a0e2c03e821.1725349691.git.michal.simek@amd.com
2024-08-05amd: Enable the NFS command for Versal Gen 2Prasad Kummari
Enabled the default utilization of the NFS command on Versal Gen 2 platform to facilitate booting images through the network using the NFS protocol Signed-off-by: Prasad Kummari <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2024-08-05arm64: versal2: Remove UARTLITE from defconfigMichal Simek
UARTLITE can be used as console but none is testing it that's why removing it not to pop up there. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/c9b66495bbdef3fe94467ae43c50a74adaaeacae.1718716833.git.michal.simek@amd.com
2024-08-05config: Enable the config CONFIG_MMC_SPEED_MODE_SETVenkatesh Yadav Abbarapu
Enable setting speed mode using mmc dev commands. The speed mode is provided as the last argument in these commands (ex: mmc dev 0 0 10) and is indicated using the index from enum bus_mode in include/mmc.h. A speed mode can be set if it is enabled from device tree or from capabilities register Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2024-06-17xilinx: Enable FF-A for all our arm64 SoCsMichal Simek
Enable FFA_TRANSPORT which also enable FFA command. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/5a850b1558fad0f05c61de82110abe4c0e7fd2e4.1718104009.git.michal.simek@amd.com
2024-06-17spi: versal2: Enable spi drivers for Versal Gen 2Michal Simek
Enable and update OSPI/QSPI/GQSPI drivers to support Versal Gen 2 SoCs. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/691782470f56f7d49a3204f6757296f2752d4156.1716994063.git.michal.simek@amd.com
2024-06-17mmc: versal2: Update zynq_sdhci driver to support AMD Versal Gen 2Michal Simek
Enable tap delay programming for new SoC and also enable it via defconfig. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/f07daded9704cbc393657b65a28933c34a8cec25.1716994063.git.michal.simek@amd.com
2024-06-17soc: versal2: Add SoC driver for AMD Versal Gen 2Michal Simek
Communication is happening via firmware interface (SMC) or via direct register reading if firmware driver is not available. Also enable it via defconfig. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/22cf9c765e47ab03dbf2b8363e6626e809113432.1716994063.git.michal.simek@amd.com
2024-06-17arm64: versal2: Add support for AMD Versal Gen 2Michal Simek
Add support for AMD Versal Gen 2. SoC is based on Cortex-a78ae 4 cluster/2 cpu core each. A lot of IPs are shared with previous families. There are couple of new IP blocks where the most interesting from user point of view is UFS. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/bc2b70831ce1031bd0fac32357bff84936e1310f.1716994063.git.michal.simek@amd.com
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-29 16:53:53 +0000