summaryrefslogtreecommitdiff
path: root/configs/harmony_defconfig
AgeCommit message (Collapse)Author
2025-06-20Merge patch series "Consistent Kconfig environment options CONFIG_ENV_ prefix"Tom Rini
Marek Vasut <[email protected]> says: Rename the environment related variables and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Link: https://lore.kernel.org/r/[email protected]
2025-06-20env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDRMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Reviewed-by: Tom Rini <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2025-06-09configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2025-04-12video: tegra: adjust DC and DSI config namesSvyatoslav Ryhel
Fix DC and DSI config names to reflect more generic nature of existing Tegra video drivers. Signed-off-by: Svyatoslav Ryhel <[email protected]>
2025-03-13spl: Add an SPL_HAVE_INIT_STACK optionSimon Glass
At present there is a hex value SPL_STACK which both determines whether SPL has its own initial stack and the hex value of that stack. Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending on that and only providing the latter. Signed-off-by: Simon Glass <[email protected]> [trini: Resync defconfig files]
2024-11-12configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-03-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-01-22mtd: Make CONFIG_MTD be the gate symbol for the menuTom Rini
The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <[email protected]>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Reviewed-by: Martyn Welch <[email protected]> Reviewed-by: Svyatoslav Ryhel <[email protected]>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-07-14disable NFS support by defaultPeter Robinson
While NFS is widely used in data centres, and private networks it's quite a nuanced usecase for device firmware. A lot of devices already disable it. Various network protocols should really be opt in, not opt out, because they add extra size and are potential attack vectors from a security PoV. In the NFS case it doesn't really make sense for a lot of devices like tables, SBCs etc. It's also something we don't really want for SystemReady-IR due to security concerns. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Ilias Apalodimas <[email protected]>
2023-05-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-02-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_TEGRA_ENABLE_UARTA et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TEGRA_ENABLE_UARTA CONFIG_TEGRA_ENABLE_UARTB CONFIG_TEGRA_ENABLE_UARTC CONFIG_TEGRA_ENABLE_UARTD CONFIG_TEGRA_SPI CONFIG_TEGRA_UARTA_GPU CONFIG_TEGRA_UARTA_SDIO1 CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 Signed-off-by: Tom Rini <[email protected]>
2022-11-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-11-10Convert CONFIG_SYS_NONCACHED_MEMORY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NONCACHED_MEMORY To do this we introduce CONFIG_SYS_HAS_NONCACHED_MEMORY as a bool to gate if we are going to have noncached_... functions available and then continue to use CONFIG_SYS_NONCACHED_MEMORY to store the size of said cache. We make this new option depend on both the architectures which implement support and the drivers which make use of it. Cc: Tom Warren <[email protected]> Cc: Mingming lee <[email protected]> Cc: "Ying-Chun Liu (PaulLiu)" <[email protected]> Cc: Alban Bedel <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Marcel Ziswiler <[email protected]> Cc: Allen Martin <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <[email protected]>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_BSS_MAX_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_BSS_MAX_SIZE CONFIG_SPL_MAX_FOOTPRINT Note that the da850evm platforms were violating the "only use one" rule here, and so now hard-code their BSS limit. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_TEGRA_NAND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TEGRA_NAND Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_CONS_INDEX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX CONFIG_DEBUG_UART_CLOCK CONFIG_FSL_TZPC_BP147 CONFIG_GENERIC_ATMEL_MCI CONFIG_IDENT_STRING CONFIG_LIBATA CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_LPC32XX_GPIO CONFIG_MP CONFIG_MPC8XXX_GPIO CONFIG_MTD_PARTITIONS CONFIG_MVGBE CONFIG_MXC_GPIO CONFIG_NR_DRAM_BANKS CONFIG_OF_BOARD_SETUP CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_OF_SYSTEM_SETUP CONFIG_PREBOOT CONFIG_ROCKCHIP_SERIAL CONFIG_RTC_ENABLE_32KHZ_OUTPUT CONFIG_RTC_MV CONFIG_SCSI_AHCI CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_SPEED CONFIG_SOFT_SPI CONFIG_SPI_FLASH_EON CONFIG_SPI_FLASH_MACRONIX CONFIG_SPI_FLASH_MTD CONFIG_SPI_FLASH_SPANSION CONFIG_SPI_FLASH_SST CONFIG_SPI_FLASH_STMICRO CONFIG_SUPPORT_RAW_INITRD CONFIG_SYS_ARCH_TIMER CONFIG_SYS_BOARD CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE CONFIG_SYS_DCACHE_OFF CONFIG_SYS_FDT_SAVE_ADDRESS CONFIG_SYS_FLASH_CFI CONFIG_SYS_FSL_ERRATUM_ESDHC135 CONFIG_SYS_HAS_SERDES CONFIG_SYS_L2CACHE_OFF CONFIG_SYS_LITTLE_ENDIAN CONFIG_SYS_LOAD_ADDR CONFIG_SYS_MMCSD_FS_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR CONFIG_SYS_NS16550 CONFIG_SYS_PLLFIN CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_TIMER_SYS_TICK_CH CONFIG_USB_EHCI_FSL CONFIG_U_QE CONFIG_VERSION_VARIABLE Signed-off-by: Tom Rini <[email protected]>
2021-10-06Convert CONFIG_SYS_NAND_ONFI_DETECTION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_NAND_ONFI_DETECTION Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-07-07configs: Remove unnecessary CONFIG_DM_PCI_COMPAT=yTom Rini
The following boards no longer need CONFIG_DM_PCI_COMPAT enabled, so remove that. Signed-off-by: Tom Rini <[email protected]>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-08-10configs: Resync with savedefconfigv2020.10-rc2Tom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <[email protected]> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <[email protected]>
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-06configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-05-15rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <[email protected]>
2020-02-06video: enable VIDEO_ANSI and all VIDEO_BBP optionsAnatolij Gustschin
This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <[email protected]> Reported-by: Vagrant Cascadian <[email protected]>
2019-12-06video: make BPP and ANSI configs optionalAnatolij Gustschin
Many boards do not use all selected framebuffer depth configurations, for such boards there is some unused code in video and console uclass routines. Make depth specific code optional to avoid dead code and slightly reduce binary size. Also make ANSI code optional for the same reason. When i.e. using only VIDEO_BPP16 the code size shrinks (below values when using gcc-7.3.0): $ ./tools/buildman/buildman -b video-wip -sS wandboard ... 01: Merge git://git.denx.de/u-boot-sh 02: video: add guards around 16bpp/32bbp code 03: video: make BPP and ANSI configs optional arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0 Signed-off-by: Anatolij Gustschin <[email protected]> Tested-by: Eugen Hristev <[email protected]> Tested-by: Patrice Chotard <[email protected]> Tested-by: Steffen Dirkwinkel <[email protected]>
2019-12-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2019-12-04mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selectedMiquel Raynal
Raw NAND support must be enabled when the environment is in NAND. Signed-off-by: Miquel Raynal <[email protected]> Reviewed-by: Boris Brezillon <[email protected]>
2019-12-04mtd: ensure UBI is compiled when using fastmapMiquel Raynal
UBI must be enabled when using fastmap, reflect this is defconfigs. Signed-off-by: Miquel Raynal <[email protected]> Reviewed-by: Boris Brezillon <[email protected]>
2019-12-04mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flashMiquel Raynal
Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <[email protected]>
2019-12-03mtd: rename CONFIG_MTD -> CONFIG_DM_MTDMiquel Raynal
CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> [trini: Add Kconfig files] Signed-off-by: Tom Rini <[email protected]>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] Signed-off-by: Tom Rini <[email protected]> Acked-by: Joe Hershberger <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2019-09-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2019-04-29configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt
Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <[email protected]> [trini: Re-run migration] Signed-off-by: Tom Rini <[email protected]>
2019-04-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-11 21:07:33 +0000