summaryrefslogtreecommitdiff
path: root/configs/libretech-cc_defconfig
AgeCommit message (Collapse)Author
2026-05-11configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2026-04-22configs: libretech-cc_defconfig: enable EFI Capsule on DiskFerass El Hafidi
Everything is in place to allow this board to support EFI Capsule updates. Enable everything needed to support Capsule updates, as well as Capsule on Disk. All this allows updating U-Boot on eMMC directly from linux using fwupd. Also enable DFU_MMC, which is a requirement for EFI Capsule flashing to eMMC/SD to work. Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Ferass El Hafidi <[email protected]> Link: https://patch.msgid.link/20260422-b4-amlogic-sysreset-capsules-v3-4-07b5ccc8f552@postmarketos.org Signed-off-by: Neil Armstrong <[email protected]>
2025-10-27configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2025-06-20env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDRMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Reviewed-by: Tom Rini <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-04-04dts: meson: Switch GXL, GXM & AXG to using upstream DTNeil Armstrong
Enable OF_UPSTREAM to use upstream DT and add amlogic/ prefix to the DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/ including *-u-boot.dtsi files from arch/$(ARCH)/dts/ directory. Cc: Sumit Garg <[email protected]> Acked-by: Viacheslav Bocharov <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Tested-by: Mattijs Korpershoek <[email protected]> # khadas-vim3_android Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-12-19ARM: dts: sync Amlogic GX DT to Linux v6.4Neil Armstrong
Sync Amlogic GXBB, GXL & GXM DTs from Linux v6.4, and also switch to GXL MDIO MUX driver to adapt to DT change, Most of the changes are only cosmetic or doesn't concern U-Boot, the most important change for U-Boot is the GXL mdio mux compatible switch to amlogic,gxl-mdio-mux. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-10-26ARM: meson: enable USB DFU + RAM on Amlogic boards with USB GadgetNeil Armstrong
Enable DFU as an alternate USB boot method when script wasn't uploaded, this fixes USB full boot on G12/SM1 boards. Link: https://lore.kernel.org/r/[email protected] [narmstrong: remove dfu from ad401] Signed-off-by: Neil Armstrong <[email protected]>
2023-10-26ARM: meson: enable FIT with LEGACY_IMAGE_FORMAT on all configsNeil Armstrong
Allow all boards to boot with a fitImage, but keep support for Legacy image format for now. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-05-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-02-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-01-20ARM: meson: switch AXG & GX dwc2 otg to DMNeil Armstrong
With CONFIG_DM_USB_GADGET=y, we no longer need any board_usb_*() logic because: * the dwc2 driver is DM compatible, and handles its own clock enabling * the dwc3-meson-gxl glue drivers handles "force mode switching" Remove all mach-meson gx & axg usb code and enable CONFIG_DM_USB_GADGET. Note: Only configs having both CONFIG_USB_DWC3_MESON_GXL=y *and* USB_GADGET_DWC2_OTG=y have been updated. Thanks for the original work from Mattijs at [1] [1] https://lore.kernel.org/all/[email protected]/ Reviewed-by: Mattijs Korpershoek <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <[email protected]>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2022-04-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-02-09Convert CONFIG_REMAKE_ELF to KconfigAlper Nebi Yasak
This converts the following to Kconfig: CONFIG_REMAKE_ELF Signed-off-by: Alper Nebi Yasak <[email protected]>
2022-01-07configs: amlogic: Disable CONFIG_NET_RANDOM_ETHADDR when unnecessaryNeil Armstrong
On Meson GXL, GXM, AXG, G12A, G12B & SM1 SoCs, we can generate an unique MAC address if none valid found in the eFuses storage. Only the GXBB based boards doesn't have a fallback way to generate an unique MAC address, so we rely on CONFIG_NET_RANDOM_ETHADDR to have a valid one. An exception is the Radxa Zero board who doesn't have Ethernet on board so depends on an (or multiple) eventual USB adapters, so leaving the CONFIG_NET_RANDOM_ETHADDR configs seems safer. Suggested-by: Tom Rini <[email protected]> Reviewed-by: Vyacheslav Bocharov <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-05-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-04-27configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-04-06configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCsNeil Armstrong
Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type. Signed-off-by: Neil Armstrong <[email protected]>
2021-04-06configs: update Amlogic Meson GXL & GXM config for MDIO MUXNeil Armstrong
Use DM_MDIO and the new MMIOREG MDIO MUX driver for GXL & GXM board. Signed-off-by: Neil Armstrong <[email protected]>
2021-01-11configs: use the new MESON_EE_POWER_DOMAIN driver for Amlogic GXBB/GXL/GXM ↵Neil Armstrong
boards Linux 5.10-rc1 uses the new generic driver, so switch to it since GXBB and later is now supported. Signed-off-by: Neil Armstrong <[email protected]>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-10-05ARM: mach-meson: use new DWC3 glue for GXL & GXMNeil Armstrong
Use the new Amlogic GXL/GXM USB Glue instead of the set of USB3 PHY and Simple DWC3 wrapper. Signed-off-by: Neil Armstrong <[email protected]>
2020-08-27cmd: Kconfig: Change dependency for CMD_ADCMichal Simek
CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Tom Rini <[email protected]> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <[email protected]>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <[email protected]>
2020-08-10configs: Resync with savedefconfigv2020.10-rc2Tom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-06-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-04-20configs: libretech-cc: Enable USB gadget with Mass Storage functionNeil Armstrong
Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <[email protected]>
2020-02-06video: enable VIDEO_ANSI and all VIDEO_BBP optionsAnatolij Gustschin
This partially reverts changes by commit 2cc393f32fd9 ("video: make BPP and ANSI configs optional") since it caused issues with other boards (missing LCD console output on pinebook, x86 platform or sandbox). Enable all disabled options again and opt out of not supported color depth in board defconfigs. Signed-off-by: Anatolij Gustschin <[email protected]> Reported-by: Vagrant Cascadian <[email protected]>
2020-01-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2019-12-06video: make BPP and ANSI configs optionalAnatolij Gustschin
Many boards do not use all selected framebuffer depth configurations, for such boards there is some unused code in video and console uclass routines. Make depth specific code optional to avoid dead code and slightly reduce binary size. Also make ANSI code optional for the same reason. When i.e. using only VIDEO_BPP16 the code size shrinks (below values when using gcc-7.3.0): $ ./tools/buildman/buildman -b video-wip -sS wandboard ... 01: Merge git://git.denx.de/u-boot-sh 02: video: add guards around 16bpp/32bbp code 03: video: make BPP and ANSI configs optional arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0 Signed-off-by: Anatolij Gustschin <[email protected]> Tested-by: Eugen Hristev <[email protected]> Tested-by: Patrice Chotard <[email protected]> Tested-by: Steffen Dirkwinkel <[email protected]>
2019-11-20env: Finish migration of common ENV optionsTom Rini
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] Signed-off-by: Tom Rini <[email protected]> Acked-by: Joe Hershberger <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2019-11-20env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbolTom Rini
Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <[email protected]> Cc: Joe Hershberger <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2019-04-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2019-04-10ARM: meson: display Amlogic SoC InformationJulien Masson
The Amlogic SoCs have a registers containing the die revision and packaging type to determine the SoC family and package marketing name like S905X for the GXL SoC Family. This code is taken from the Linux meson-gx-socinfo driver and adapted to U-Boot printing. Signed-off-by: Julien Masson <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> [narmstrong: also updated new p200/p201 defconfigs]
2019-02-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2019-01-31arm: libretech-cc: enable video by defaultMaxime Jourdan
libretech-cc being the main device tested with CONFIG_VIDEO_MESON, let's enable it by default. Also enable: - CONFIG_SYS_WHITE_ON_BLACK for prettiness - CONFIG_VIDEO_DT_SIMPLEFB for framebuffer sharing with kernel Signed-off-by: Maxime Jourdan <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Anatolij Gustschin <[email protected]>
2019-01-31arm: meson64: enable console mux and console env by defaultMaxime Jourdan
With the recent addition of the meson VPU driver, enable the following config entries by default for meson-64 targets: CONFIG_CONSOLE_MUX, CONFIG_SYS_CONSOLE_IS_IN_ENV. This allows outputting the console via video if CONFIG_VIDEO_MESON is selected. Signed-off-by: Maxime Jourdan <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Anatolij Gustschin <[email protected]>
2019-01-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2018-11-26ARM: rework amlogic configurationJerome Brunet
Rework the board SYS_BOARD, SYS_VENDOR and SYS_CONFIG_NAME setup by moving the board Kconfig into the mach-meson Kconfig to make it easier to add new boards for a SoC architecture and add a custom config header or custom board handler for a platform. This drops the board CONFIGs and the duplicate boards configs headers in favor of a single meson64.h config header. Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-29 15:22:12 +0000