summaryrefslogtreecommitdiff
path: root/configs/mx6cuboxi_defconfig
AgeCommit message (Collapse)Author
2026-05-11configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2026-04-03sata: Rework the CMD_SATA and SATA symbolsTom Rini
Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini <[email protected]>
2025-06-20env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDRMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Reviewed-by: Tom Rini <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2024-10-25ARM: imx: soc: Select default TEXT_BASE for i.MX6Marek Vasut
Select default U-Boot and SPL text base for the i.MX6 SoC. The U-Boot and SPL text base is picked as the one used by various i.MX6 boards. Update all the boards. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2024-04-05mx6cuboxi: Do not print devicetree modelFabio Estevam
The mx6cuboxi_defconfig target supports several board variants. All of these variants use the hummingboard devicetree in U-Boot. Currently, the devicetree model as well as the board variant name are shown: ... Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) Board: MX6 Cubox-i ... Printing the devicetree model that is used internally by U-Boot may confuse users. Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the board name is printed in board_late_init() instead. Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Christian Gmeiner <[email protected]>
2024-03-30mx6cuboxi: Convert to watchdog driver modelFabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Christian Gmeiner <[email protected]>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Reviewed-by: Martyn Welch <[email protected]> Reviewed-by: Svyatoslav Ryhel <[email protected]>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-05-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-03-27configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_IMX_VIDEO_SKIP et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_VIDEO_SKIP CONFIG_IMX_HDMI Signed-off-by: Tom Rini <[email protected]>
2022-11-14Merge tag 'u-boot-imx-20221114' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2022.01 ----------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14083 - Fix UART - moved to binman (MX8 boards) - Toradex: sync DTS with Linux - Gateworks: fixes - New boards : MSC SM2S iMX8MP
2022-11-10Convert CONFIG_SYS_MONITOR_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MONITOR_LEN To do this, we set a default of 0 for everyone because there are a number of cases where we define CONFIG_SYS_MONITOR_LEN but the only impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE, so we must continue to allow all boards to set this value. Update the SPL code to use 200 KB as the default raw U-Boot size directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-11-08mx6cuboxi: migrate to DM_SERIALBaruch Siach
Add the needed DT overrides to enable UART in SPL. Cc: Fabio Estevam <[email protected]> Signed-off-by: Baruch Siach <[email protected]> Tested-by: Tom Rini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-11-07configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <[email protected]>
2022-10-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <[email protected]>
2022-06-20Merge branch 'master' into nextTom Rini
Merge in v2022.07-rc5.
2022-06-14mx6cuboxi: enable driver for adin1300 phyJosua Mayer
Since SoMs revision 1.9 the ar8035 phy has been replaced by adin1300. Enable the driver so that the new SoMs have functional networking. Signed-off-by: Josua Mayer <[email protected]>
2022-06-14mx6cuboxi: fixup dtb ethernet phy nodes before booting an OSJosua Mayer
SoM revision 1.9 has replaced the ar8035 phy address 0 with an adin1300 at address 1. Because early SoMs had a hardware flaw, the ar8035 can also appear at address 4 - making it a total of 3 phy nodes in the DTB. To avoid confusing Linux with probe errors, fixup the dtb to only enable the phy node that is detected at runtime. Signed-off-by: Josua Mayer <[email protected]>
2022-06-06Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_SPL_MALLOC_START We introduce a default value here as well, and CONFIG_SYS_SPL_MALLOC to control if we have a malloc pool or not. Signed-off-by: Tom Rini <[email protected]>
2022-06-06imx6: Update CONFIG_SPL_STACK defaults in KconfigTom Rini
Update the Kconfig entry to have the correct defaults for i.MX6 platforms, and move the existing large comment from imx6_spl.h to doc/imx/common/imx6.txt so that it's not lost. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_STACK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_STACK Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SPL_FS_LOAD_PAYLOAD_NAME et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_FS_LOAD_ARGS_NAME CONFIG_SPL_FS_LOAD_KERNEL_NAME CONFIG_SPL_FS_LOAD_PAYLOAD_NAME Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2022-04-22configs: Resync with savedefconfigTom Rini
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-01-24configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-12-26video: Convert CONFIG_VIDEO_LOGO to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_LOGO Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is deprecated. The only relevant code is now in splash.c Drop the check for DM_VIDEO in that file. Signed-off-by: Simon Glass <[email protected]>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-09-04serial: Rename SERIAL_SUPPORT to SERIALSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <[email protected]>
2021-09-04mmc: Rename MMC_SUPPORT to MMCSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]> [trini: Fixup some incorrect renames] Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-07-28i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2021-07-28Rename GPIO_SUPPORT to GPIOSimon Glass
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <[email protected]>
2021-07-28Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass
Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <[email protected]>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-05-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-12-07configs: migrate CONFIG_IMX_THERMAL to defconfigsTom Rini
Done via moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-08-25Merge tag 'u-boot-imx-20200825' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - mx6: SOCs user selectable Fix for imx6q_logic Some DM conversion - mx7: introduce secondary boot device Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/720918010 Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-11 08:27:46 +0000