summaryrefslogtreecommitdiff
path: root/configs/mx6qsabrelite_defconfig
AgeCommit message (Collapse)Author
2026-05-11configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2026-04-03sata: Rework the CMD_SATA and SATA symbolsTom Rini
Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini <[email protected]>
2025-06-20env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDRMarek Vasut
Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Reviewed-by: Tom Rini <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2024-10-25ARM: imx: soc: Select default TEXT_BASE for i.MX6Marek Vasut
Select default U-Boot and SPL text base for the i.MX6 SoC. The U-Boot and SPL text base is picked as the one used by various i.MX6 boards. Update all the boards. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2024-07-22nitrogen6x: convert to DM_I2C and DM_SERIALAnatolij Gustschin
Rework to remove use of legacy I2C API. Also switch to DM_SERIAL to avoid board removal warning. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Troy Kisky <[email protected]>
2024-03-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-05-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_IMX_VIDEO_SKIP et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_VIDEO_SKIP CONFIG_IMX_HDMI Signed-off-by: Tom Rini <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-30video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEOSimon Glass
Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <[email protected]>
2022-10-30Convert CONFIG_VIDEO_LOGO_MAX_SIZE to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_VIDEO_LOGO_MAX_SIZE Signed-off-by: Simon Glass <[email protected]>
2022-10-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2022-04-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-03-18imx: Convert some boards to DM_ETHTom Rini
A small number of i.MX6/7 and vf610 boards have not enabled DM_ETH yet. Given the state of the rest of the platform, enable DM_ETH. Cc: Alison Wang <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Richard Hu <[email protected]> Cc: Troy Kisky <[email protected]> Cc: Uri Mashiach <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <[email protected]>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_FEC_MXC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <[email protected]>
2021-11-01configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-10-15configs: Resync with savedefconfigTom Rini
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-09-04configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <[email protected]> Acked-by: Sean Anderson <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-31nitrogen6x: Populate FDTFILE at build-time for all platformsTom Rini
Rather than using CONFIG_SABRELITE to set FDTFILE for only that platform, switch to always setting this based on CONFIG_DEFAULT_DEVICE_TREE as this should always match the kernel device tree name anyhow. Signed-off-by: Tom Rini <[email protected]> Acked-by: Troy Kisky <[email protected]>
2021-08-31nitrogen6x: Migrate DDR_MB to KconfigTom Rini
Move the CONFIG_DDR_MB symbol to Kconfig. A later clean-up would be to make dynamic memory size detection work based on how this is done on other i.MX6 platforms. Signed-off-by: Tom Rini <[email protected]> Acked-by: Troy Kisky <[email protected]>
2021-08-31imx: Finish migration of IMX_CONFIG to KconfigTom Rini
- Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-05-11configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-11-30configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-10-18configs: migrate CONFIG_BMP_16/24/32BPP to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py BMP_16BPP BMP_24BPP BMP_32BPP Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_RLE8 to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py VIDEO_BMP_RLE8 Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-18configs: migrate CONFIG_VIDEO_BMP_GZIP to defconfigsPatrick Delaunay
Done with: ./tools/moveconfig.py VIDEO_BMP_GZIP The 3 suspicious migration because CMD_BMP and SPLASH_SCREEN are not activated in these defconfigs: - trats_defconfig - s5pc210_universal_defconfig - trats2_defconfig Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-10-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-09-17mx6qsabrelite: increase the environment offsetDenis Pynkin
The size of the binary created with the default U-boot config is much greater than the default offset for environment `0x60000`. In case if that binary is used for booting via MMC it is overlapped with the environment stored on MMC. This leads to U-Boot corruption while saving environment with `saveenv` command and non-bootable SabreLite board. The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in commit a09fea1 but did not count in the change to `0xC0000` if option `CONFIG_ENV_IS_IN_MMC` is used. The offset is also used for variant with environment saving onto SPI NOR flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the U-Boot binary flashed on SPI NOR is also corrupted after environment saving with the original 0x60000 offset. Signed-off-by: Denis Pynkin <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2020-08-25Merge tag 'u-boot-imx-20200825' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - mx6: SOCs user selectable Fix for imx6q_logic Some DM conversion - mx7: introduce secondary boot device Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/720918010 Signed-off-by: Tom Rini <[email protected]>
2020-08-25arm: mx6: Make all i.MX6 SoCs user-selectableTom Rini
We have a number of platforms that are a combination of a carrier board and System-on-Module (SoM) that in turn allows for the board to have different SoCs on it. In some cases, this is handled via board-specific Kconfig options. In other cases we make use of CONFIG_SYS_EXTRA_OPTIONS. This latter case however can lead to invalid configurations as we will not in turn get options that in Kconfig are selected by or depend on that setting. To resolve this, make the SoC option a choice in Kconfig and make boards depend on what they can support. This change opens us up for further clean-ups in the cases where a single CONFIG_TARGET_xxx can support different SoCs and today they do not, or do not cleanly do so. Reported-by: Matt Porter <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: "NXP i.MX U-Boot Team" <[email protected]> Cc: Soeren Moch <[email protected]> Cc: Markus Niebel <[email protected]> Cc: Igor Opaniuk <[email protected]> Cc: Heiko Schocher <[email protected]> Cc: Hannes Schmelzer <[email protected]> Cc: Otavio Salvador <[email protected]> Cc: Nikita Kiryanov <[email protected]> Cc: Andreas Geisreiter <[email protected]> Cc: Ludwig Zenz <[email protected]> Cc: Lukasz Majewski <[email protected]> Cc: Akshay Bhat <[email protected]> Cc: Ken Lin <[email protected]> Cc: Ian Ray <[email protected]> Cc: Tim Harvey <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Raffaele RECALCATI <[email protected]> Cc: Simone CIANNI <[email protected]> Cc: Adam Ford <[email protected]> Cc: Marcin Niestroj <[email protected]> Cc: "Eric Bénard" <[email protected]> Cc: Baruch Siach <[email protected]> Cc: Jason Liu <[email protected]> Cc: Ye Li <[email protected]> Cc: Eric Nelson <[email protected]> Cc: Troy Kisky <[email protected]> Cc: Peng Fan <[email protected]> Cc: Parthiban Nallathambi <[email protected]> Cc: Marek Vasut <[email protected]> Cc: "Sébastien Szymanski" <[email protected]> Cc: Christian Gmeiner <[email protected]> Cc: Niel Fourie <[email protected]> Cc: Martyn Welch <[email protected]> Cc: Richard Hu <[email protected]> Cc: Stefan Roese <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Arkadiusz Karas <[email protected]> Cc: Breno Lima <[email protected]> Cc: Francesco Montefoschi <[email protected]> Cc: Silvio Fricke <[email protected]> Tested-by: Matt Porter <[email protected]> [colibri_imx6] Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Marcin Niestroj <[email protected]>
2020-08-23Convert CONFIG_SPLASH_SCREEN et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SPLASH_SCREEN CONFIG_SPLASH_SCREEN_ALIGN CONFIG_SPLASHIMAGE_GUARD CONFIG_SPLASH_SOURCE Signed-off-by: Simon Glass <[email protected]>
2020-08-23Convert CONFIG_NETCONSOLE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <[email protected]>
2020-08-10configs: Resync with savedefconfigv2020.10-rc2Tom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <[email protected]> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <[email protected]>
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-17Convert CONFIG_MXC_UART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <[email protected]> Acked-by: Peng Fan <[email protected]>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-28 14:33:19 +0000