summaryrefslogtreecommitdiff
path: root/configs/netspace_v2_defconfig
AgeCommit message (Collapse)Author
8 dayssata: Rework the CMD_SATA and SATA symbolsTom Rini
Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini <[email protected]>
2026-01-06configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2025-06-09configs: Resync with savedefconfigTom Rini
Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-11-12configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-10-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2024-04-04arm: dts: kirkwood: Enable upstream DT on Kirkwood boardsTony Dinh
Enable OF_UPSTREAM to use upstream DT and add marvell/ prefix to the DEFAULT_DEVICE_TREE for Kirkwood boards. And so we can directly build DTBs from dts/upstream/src/arm/marvell, and including *-u-boot.dtsi files from arch/arm/dts/ directory. Background: The following 2 commands and filters were used in the analysis to determine which upstream DTS and DTSI files can be used as they are, or need to have modified/created *-u-boot.dtsi for u-boot specific implementation, and which board should be opt-out from OF_UPSTREAM. "git grep -li arch_kirkwood configs | xargs grep DEVICE_TREE | cut -d '"' -f2 | xargs -n1 sh -c 'diff -qs arch/arm/dts/$1.dts dts/upstream/src/arm/marvell/$1.dts' sh | grep differ" "diff -qrbu arch/arm/dts/ dts/upstream/src/arm/marvell/ | grep kirkwood | grep ".dtsi "" More detailed information can be found at: https://lore.kernel.org/u-boot/[email protected]/T/#u I've regression tested this patch with the Zyxel NSA325 (Kirkwood 88F6282) and Zyxel NSA310S (Kirkwood 88F6281). The Zyxel NSA325 board has a USB 3.0 controller attached to the PCIe bus. And the Zyxel NSA310S has an extensive overhaul in bindings and styles in upstream DTS version. Tested-by: Michael Walle <[email protected]> # on lschv2 Acked-by: Sumit Garg <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Signed-off-by: Tony Dinh <[email protected]>
2024-01-22mtd: Make CONFIG_MTD be the gate symbol for the menuTom Rini
The help for CONFIG_MTD explains that it needs to be enabled for various things like NAND, etc to be available. It however then doesn't enforce this dependency and so if you have none of these systems present you still need to disable a number of options. Fix this by making places that select/imply one type of flash, but did not do the same, also do this for "MTD". Make boards which hadn't been enabling MTD already but need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it wasn't previously enabled but was now being implied. Signed-off-by: Tom Rini <[email protected]>
2024-01-03configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-10-02configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2023-02-17configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-12-05Convert CONFIG_SYS_NS16550_MEM32 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_NS16550_MIN_FUNCTIONS CONFIG_SYS_NS16550_MEM32 CONFIG_SYS_NS16550_PORT_MAPPED CONFIG_SYS_NS16550_REG_SIZE CONFIG_SYS_NS16550_SERIAL To do this we also introduce CONFIG_SPL_SYS_NS16550_SERIAL so that platforms can enable the legacy driver here for SPL. Signed-off-by: Tom Rini <[email protected]>
2022-10-31Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass
The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <[email protected]>
2022-10-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-08-23configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-06-28Rename CONFIG_SYS_AUTOLAOD to CONFIG_SYS_DISABLE_AUTOLOADTom Rini
The "autoload" environment variable is always checked with env_get_yesno as it can be set to any form of no. The default behavior of env_get_yesno is to return -1 on variables that are not set, which acts as true in general (we test for non-zero return). To convert CONFIG_SYS_AUTOLOAD to Kconfig, given that it was almost always used to set autoload to no, first rename to CONFIG_SYS_DISABLE_AUTOLOAD for consistency sake. Then, make it so that if enabled we set autoload=0 in the default environment. Migrate all platforms which set CONFIG_SYS_AUTOLOAD to non-true or that set autoload to false in their default environment to using CONFIG_SYS_DISABLE_AUTOLOAD Signed-off-by: Tom Rini <[email protected]>
2022-06-28Convert CONFIG_LBA48 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <[email protected]>
2022-06-06Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_PBSIZE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <[email protected]>
2022-06-06Convert CONFIG_SYS_MAXARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MAXARGS Signed-off-by: Tom Rini <[email protected]>
2022-04-08configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2022-03-25Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FAULT_ECHO_LINK_DOWN Cc: Ramon Fried <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-03-25Convert CONFIG_RESET_PHY_R to KconfigTom Rini
This converts the following to Kconfig: CONFIG_RESET_PHY_R Cc: Ramon Fried <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-02-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py and update scripts/pylint.base Signed-off-by: Tom Rini <[email protected]>
2022-02-09Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2022-02-09sata: Rearrange Kconfig for SATASimon Glass
Move the SATA options inside an 'if SATA' part, so they are grouped. Fix the 'Complient' typo while we are here. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-12-27Convert CONFIG_KIRKWOOD_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KIRKWOOD_GPIO Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_SYS_KWD_CONFIG to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_KWD_CONFIG Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_88F5182 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_88F5182 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE CONFIG_D2NET_V2 CONFIG_FEROCEON CONFIG_FEROCEON_88FR131 CONFIG_INETSPACE_V2 CONFIG_KW88F6192 CONFIG_KW88F6281 CONFIG_KW88F6702 CONFIG_NET2BIG_V2 CONFIG_NETSPACE_LITE_V2 CONFIG_NETSPACE_MAX_V2 CONFIG_NETSPACE_MINI_V2 CONFIG_NETSPACE_V2 CONFIG_SHEEVA_88SV131 At this point mv-plug-common.h is now only an include of mv-common.h so remove that indirection. Signed-off-by: Tom Rini <[email protected]>
2021-12-27Convert CONFIG_ENV_SPI_BUS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE As part of this, we use Kconfig to provide the defaults now that were done in include/spi_flash.h. We also in some cases change from using CONFIG_ENV_SPI_FOO to CONFIG_SF_DEFAULT_FOO as those were the values in use anyhow as ENV was not enabled. Signed-off-by: Tom Rini <[email protected]>
2021-12-01Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SKIP_LOWLEVEL_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SKIP_LOWLEVEL_INIT CONFIG_SKIP_LOWLEVEL_INIT_ONLY In order to do this, we need to introduce SPL and TPL variants of these options so that we can clearly disable these options only in SPL in some cases, and both instances in other cases. Signed-off-by: Tom Rini <[email protected]>
2021-08-31Convert CONFIG_SYS_LOAD_ADDR to KconfigTom Rini
Now that we have consistent usage, migrate this symbol to Kconfig. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini
First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_MVTWSI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_I2C_MVTWSI Signed-off-by: Tom Rini <[email protected]>
2021-08-30Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini
- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <[email protected]>
2021-07-26configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2021-06-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-10-09configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-08-23Convert CONFIG_NETCONSOLE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_NETCONSOLE Signed-off-by: Tom Rini <[email protected]>
2020-08-10configs: Resync with savedefconfigv2020.10-rc2Tom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-28Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <[email protected]> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <[email protected]>
2020-07-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-07-09arm: kirkwood: enable DM_ETH for LaCie boardSimon Guinot
This patch enables DM_ETH for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-07-09arm: kirkwood: enable DM_USB for LaCie boardSimon Guinot
This patch enables DM_USB and USB_STORAGE for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 Signed-off-by: Simon Guinot <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-07-09arm: kirkwood: switch LaCie boards to sata_mv driverSimon Guinot
This patch switches the SATA driver from mvsata_ide to sata_mv for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-07-09arm: kirkwood: convert LaCie boards to DM_SPI_FLASHSimon Guinot
This patch converts the following Kirkwood-based LaCie boards to DM, DM_SPI and DM_SPI_FLASH: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <[email protected]> Reviewed-by: Stefan Roese <[email protected]> Reviewed-by: Jagan Teki <[email protected]>
2020-05-15rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOODTrevor Woerner
Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <[email protected]> Signed-off-by: Trevor Woerner <[email protected]>
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
2020-01-22configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-11 21:07:55 +0000