summaryrefslogtreecommitdiff
path: root/cpu/mcf52x2
AgeCommit message (Collapse)Author
2010-04-13m68k: Move cpu/$CPU to arch/m68k/cpu/$CPUPeter Tyser
Signed-off-by: Peter Tyser <[email protected]>
2010-03-24ColdFire: Cache update for all platformsTsiChung Liew
The CF will call cache functions in lib_m68/cache.c and the cache settings are defined in platform configuration file. Signed-off-by: TsiChung Liew <[email protected]>
2010-03-24ColdFire: Update processors' serial port configurationTsiChung Liew
Provide parameter passing to uart_port_config(). Update port configuration - un-mask it before enable the bits. Signed-off-by: TsiChung Liew <[email protected]>
2010-03-24ColdFire: Correct bit definitionTsiChung Liew
Use correct definition for _MASK and _UNMASK. It was combined in the previous used and causes confusion. Signed-off-by: TsiChung Liew <[email protected]>
2010-03-24Adding EP2500 MCF5282 board [PATCH]Michael Durrant
Mercury-EP2500.patch - added Mercury's EP2500 board uses the mcf5282 processor CREDITS.patch Signed-off-by: David Wu <[email protected]> Signed-off-by: Michael Durrant <[email protected]>
2010-03-04MCF5271-only: Added a weak board_reset function to allow custom resetRichard Retanubun
This patch adds a board_reset function to allow boards to specify their own custom reset sequence (e.g. resetting by timing out watchdog). Tested only on MCF5271, can be expanded if needed. Based on Mike Frysinger's suggestion on: http://article.gmane.org/gmane.comp.boot-loaders.u-boot/70304 Signed-off-by: Richard Retanubun <RichardRetanubun at RuggedCom.com>
2009-07-14ColdFire: Add M5208EVB and MCF520x CPU supportTsiChung Liew
Signed-off-by: TsiChung Liew <[email protected]>
2009-03-17ColdFire: PLATFORM_CPPFLAGS updates for new compilerTsiChung Liew
Update PLATFORM_CPPFLAGS to accept 4.3.x version of ColdFire compiler. Signed-off-by: TsiChung Liew <[email protected]>
2009-02-06Coldfire: M5271: Allow board header file to specify clock multiplierRichard Retanubun
M5271 dynamic clock multiplier. It is currently fixed at 100MHz. Allow the board header file to set their own multiplier and divider. Added the #define for the multiplier and divider to the cpu header file. Signed-off-by: Richard Retanubun <[email protected]>
2009-02-06Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2CRichard Retanubun
Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB). Use read-modify-write to activate the FEC pins without disabling I2C. Signed-off-by: Richard Retanubun <[email protected]>
2009-02-06Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core listRichard Retanubun
Added the CONFIG_M5271 to the list of Coldfire V2 processor. This was causing the bus clock (not CPU clock) to be declared twice as fast as it actually is. This causes UARTS to operate at half the specified baudrate. Signed-off-by: Richard Retanubun <[email protected]>
2008-12-16Coding style cleanup, update CHANGELOG.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2008-12-06Update U-Boot's build timestamp on every compilePeter Tyser
Use the GNU 'date' command to auto-generate a new U-Boot timestamp on every compile. Signed-off-by: Peter Tyser <[email protected]>
2008-11-03ColdFire: Relocate FEC's GPIO and mii functions protocolsTsiChung Liew
Place FEC pin assignments in cpu_init.c from platform's mii.c Signed-off-by: TsiChung Liew <[email protected]>
2008-11-03ColdFire: Modules header files cleanupTsiChung Liew
Consolidate ATA, ePORT, QSPI, FlexCan, PWM, RNG, MDHA, SKHA, INTC, and FlexBus structures and definitions in immap_5xxx.h to more unify modules header files. Append DSPI support for m547x_8x. SSI cleanup. Remove USB Host structure from immap_539.h. Apply changes to use FlexBus structures in mcf52x2's cpu_init.c and platform configuration files. Signed-off-by: TsiChung Liew <[email protected]>
2008-10-18rename CFG_ macros to CONFIG_SYSJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
2008-09-13Coding style cleanup, update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2008-09-02Introduce netdev.h header file and remove externsBen Warren
This addresses all drivers whose initializers have already been moved to board_eth_init()/cpu_eth_init(). Signed-off-by: Ben Warren <[email protected]>
2008-08-28ColdFire: I2C fix for multiple platformsTsiChung Liew
Signed-off-by: TsiChung Liew <[email protected]>
2008-08-26Moved initialization of MCFFEC Ethernet driver to CPU directoryBen Warren
Added a cpu_eth_init() function to coldfire CPU directories and removed code from net/eth.c Signed-off-by: Ben Warren <[email protected]>
2008-08-14ColdFire: Multiple fixes for M5282EVBTsiChung Liew
Incorrect CFG_HZ value, change 1000000 to 1000. Rename #waring to #warning. RAMBAR1 uses twice in start.S, rename the later to FLASHBAR. Insert nop for DRAM setup. And, env_offset in linker file. Signed-off-by: TsiChung Liew <[email protected]>
2008-07-11ColdFire: Fix FB CS not setup properly for Mcf5282TsiChung Liew
Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If CFG_CSn_RO is defined as 0, the chipselect will not be assigned. Signed-off-by: TsiChung Liew <[email protected]>
2008-07-11ColdFire: Fix compiling error for MCF5275TsiChung Liew
The compiling error was caused by missing a closed parentheses in speed.c Signed-off-by: TsiChung Liew <[email protected]>
2008-05-21Big white-space cleanup.Wolfgang Denk
This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk <[email protected]>
2008-05-03Revert "ColdFire: Get information from the correct GCC"Wolfgang Denk
This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
2008-04-30ColdFire: Get information from the correct GCCTsiChung Liew
Signed-off-by: Kurt Mahan <[email protected]> Signed-off-by: TsiChung Liew <[email protected]>
2008-04-13Coding Style cleanup; update CHANGELOGWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2008-03-31ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.STsiChung Liew
When the version_string function in start.S is not 4-byte align, it will cause the compiler generates "unaligned opcodes detected in executable segment". This issue affects all ColdFire CPUs. By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if it is not aligned. Signed-off-by: TsiChung Liew <[email protected]> Acked-by: John Rigby <[email protected]>
2008-03-31ColdFire: Remove R5200 boardTsiChung Liew
This board never went into production Signed-off-by: Zachary P. Landau <[email protected]> Acked-by: TsiChung Liew <[email protected]> Acked-by: John Rigby <[email protected]>
2008-03-31ColdFire: Added MCF5275 cpu support.Matthew Fettke
Signed-off-by: Matthew Fettke <[email protected]> Signed-off-by: TsiChung Liew <[email protected]> Acked-by: John Rigby <[email protected]>
2008-03-31ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282TsiChung Liew
Signed-off-by: TsiChung Liew <[email protected]> Acked-by: John Rigby <[email protected]>
2008-02-23cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.Shinya Kuribayashi
This will reduce the build time. Signed-off-by: Shinya Kuribayashi <[email protected]>
2008-02-20ColdFire: Fix 5282 and 5271 interrupt mask bitTsiChungLiew
Signed-off-by: TsiChung Liew <[email protected]>
2007-11-07ColdFire: Update cpu flag for 4.2-xx compilerTsiChungLiew
Signed-off-by: TsiChungLiew <[email protected]>
2007-10-25ColdFire 5282: Fix external flash boot and return dramsizeTsiChungLiew
Signed-off-by: TsiChungLiew <[email protected]>
2007-08-18Coding style cleanupStefan Roese
Signed-off-by: Stefan Roese <[email protected]>
2007-08-16ColdFire: Add M5253EVBE platform for MCF52x2TsiChungLiew
Signed-off-by: TsiChungLiew <[email protected]>
2007-08-16ColdFire: MCF52x2 updateTsiChungLiew
Signed-off-by: TsiChungLiew <[email protected]>
2007-07-10cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.Jon Loeliger
Signed-off-by: Jon Loeliger <[email protected]>
2007-07-09cpu/m*: Remove obsolete references to CONFIG_COMMANDSJon Loeliger
Signed-off-by: Jon Loeliger <[email protected]>
2007-07-04cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).Jon Loeliger
This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <[email protected]>
2007-01-23[ColdFire MCF5271 family] Add CPU detection based on the value of ChipBartlomiej Sieka
Identification Register (CIR).
2006-12-20Preliminary support for the iDMR board (ColdFire).Bartlomiej Sieka
2006-10-09Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk
Based on patch by Mike Frysinger, 20 Jun 2006
2006-09-04Merge with /home/m8/git/u-bootWolfgang Denk
2006-09-01Add support for a saving build objects in a separate directory.Marian Balakowicz
Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
2006-06-10Minor code cleanup.Wolfgang Denk
2006-06-10Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk
2006-05-10Minor cleanup.LABEL_2006_05_10_1800Wolfgang Denk
2006-05-09Fix watchdog issues for ColdFire boards.Wolfgang Denk
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-12 07:34:40 +0000