| Age | Commit message (Collapse) | Author |
|---|
|
Quentin Schulz <[email protected]> says:
This migrates the last user of the legacy LED API, IMX233-OLinuXino and
net/bootp.c, to the modern LED framework.
I do have concern about being able to use BOOTP in SPL? In which case, I
should probably add an additional check on CONFIG_IS_ENABLED(LED) in
addition to IS_ENABLED(CONFIG_LED_BOOT)?
I haven't tested this as I do not own an IMX233-OLinuXino, so please
give this a try if you own this device.
Then, since there's no user left of this legacy API, it is entirely
removed.
Link: https://lore.kernel.org/r/[email protected]
|
|
To the exception of red_led_on in the arm-specific assembly code, all
code interacting with the red status LED was guarded by the
CONFIG_LED_STATUS_RED symbol, which is enabled in none of the upstream
defconfigs.
Since the last board which overrode the weak red_led_on function got
migrated to the new LED mechanism, there's also no user of the
arm-specific assembly code anymore, therefore it can be removed along
the other unreachable code sections.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
The last user of it was removed in a previous commit so let's remove its
support entirely.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
The last user of coloured_LED_init has been recently removed, so we can
remove all places it's called and defined as it does nothing now.
Nobody makes use of the yellow and blue status LEDs from the legacy API,
so let's remove all references to it.
Signed-off-by: Quentin Schulz <[email protected]>
|
|
cmd doc"
Quentin Schulz <[email protected]> says:
u-boot,boot-led and u-boot,error-led aren't actually handled by some
generic code but rather by board or architecture specific code. They
also aren't properties that are part of the official dt-binding so they
cannot be upstreamed. For u-boot,boot-led, there's actually a proper
replacement which is /options/u-boot/boot-led[1] (+ CONFIG_LED_BOOT=y).
For Rockchip boards, either nothing (for RK3066, PX30 and RK3399) was
using that property or (for RK3188) the code handling it was guarded by
symbols that were not enabled in the defconfig. For those, the property
and guarded code are removed.
For the Sam9x60 Curiosity, it seems that even though the LED is
controlled whenever CONFIG_LED is enabled, it isn't enabled by default
in the defconfig (but the code was added without modifying the
defconfig, explicitly leaving a choice to the user). I decided to keep
that feature by simply migrating it to the new API, though I cannot test
it as I do not own the device.
The STM32 boards will be migrated in the near future once their upstream
(kernel) Device Trees gain the new way to specify this (via
/options/u-boot/boot-led). I'll let Patrice handle this, see
https://lore.kernel.org/u-boot/[email protected]/
and
https://lore.kernel.org/u-boot/[email protected]/
After this, only one user of u-boot,boot-led will be left, based on
STM32: board/dhelectronics/dh_stm32mp1/board.c. @Patrice, maybe that's
something you want to have a look at as well, this seems to be some
evaluation kit?
The only users of u-boot,error-led are STM32 boards, so I'll leave this
to Patrice as well, I do not know what's the way to go for that one.
In any case, I would like to not encourage people to use out-of-spec DT
properties when there is another option (u-boot,boot-led), so I remove
the properties from the dt-binding document from U-Boot.
The help text for the blink subcommand of the led command was misleading
so this is now fixed.
This also moves the content of doc/README.LED into the doc/api/led.rst,
while clearly stating one shouldn't be using this anymore.
This also gets rid of dt-binding that we already have in dts/upstream.
Finally, this adds documentation for the led shell command.
[1] https://github.com/devicetree-org/dt-schema/blob/v2025.08/dtschema/schemas/options/u-boot.yaml#L113-L116
Link: https://lore.kernel.org/r/[email protected]
|
|
This moves the content of the legacy LED API from doc/READ.LED to
doc/api/led.rst, applying minimal cosmetic changes to "nicely" integrate
it with the current docs and adding a small introduction to the legacy
API section.
Signed-off-by: Quentin Schulz <[email protected]>
|
|
Introduce simple led.rst documentation to document all the additional
Kconfig and the current limitation of LED_BLINK and GPIO software blink.
Also add missing definition for sw_blink in led_uc_plat struct.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
