summaryrefslogtreecommitdiff
path: root/doc/board/rockchip
AgeCommit message (Collapse)Author
2026-03-10rockchip: Switch remaining rk3288 boards to upstream devicetreeJohan Jonker
Switch remaining rk3288 boards to upstream devicetree. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2026-03-10board: rockchip: Add FriendlyElec NanoPi Zero2Jonas Karlman
The NanoPi Zero2 is a small single board computer developed by FriendlyElec, based on the Rockchip RK3528A SoC. Add support for the FriendlyElec NanoPi Zero2 board. Features tested on a FriendlyElec NanoPi Zero2 2407: - SD-card boot - eMMC boot - Ethernet - USB host Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Christopher Obbard <[email protected]> Reviewed-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2026-03-10rockchip: rk3588s-rock-5c: Add support for ROCK 5C Lite variantJonas Karlman
Add Kconfig option OF_SYSTEM_SETUP=y to support booting ROCK 5C Lite boards with a RK3582 SoC. CPU and GPU cores are failed based on ip-state and policy. Tested on a ROCK 5C Lite v1.1: cpu-code: 35 82 ip-state: 00 80 00 (otp) ip-state: c0 9e 04 (policy) remove cpu-map cluster2 fail gpu fail rkvdec1 fail rkvenc1 fail cpu cpu@600 fail cpu cpu@700 Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2026-03-09rockchip: rk3588-generic: Enable support for RK3582Jonas Karlman
Add Kconfig option OF_SYSTEM_SETUP=y to support booting boards with a RK3582 SoC. CPU and GPU cores are failed based on ip-state and policy. Tested on a ROCK 5C Lite v1.1: cpu-code: 35 82 ip-state: 10 00 00 (otp) ip-state: 30 9e 04 (policy) remove cpu-map cluster1 rename cpu-map cluster2 fail gpu fail rkvdec1 fail rkvenc1 fail cpu cpu@400 fail cpu cpu@500 and on a Radxa E52C: cpu-code: 35 82 ip-state: 00 04 00 (otp) ip-state: c0 9e 04 (policy) remove cpu-map cluster2 fail gpu fail rkvdec1 fail rkvenc1 fail cpu cpu@600 fail cpu cpu@700 Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-12-14rockchip: rock5b-rk3588: Add support for Radxa ROCK 5TFUKAUMI Naoki
Include the FDT for Radxa ROCK 5T in the FIT, in addition to those for 5B and 5B+, and add board selection code to load the 5T FDT when the DRAM type is LPDDR5 and ADC channel 5 value is close to 1016. Signed-off-by: FUKAUMI Naoki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-12-14rockchip: rock5b-rk3588: Add support for ROCK 5B+Jonas Karlman
Include FDTs for both ROCK 5B and 5B+ in the FIT and add board selection code to load the 5B+ FDT when the DRAM type is LPDDR5 and ADC channel 5 value is close to 4095. U-Boot 2025.07 (Jul 14 2025 - 21:28:20 +0000) Model: Radxa ROCK 5B+ SoC: RK3588 DRAM: 8 GiB Features tested on a ROCK 5B+ v1.2: - SD-card boot - eMMC boot - SPI flash boot - PCIe/NVMe - Ethernet - USB/TCPM Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: Add support for rk3588 MNT Reform2Peter Robinson
Add support for MNT Reform2, it works as a carrier board with a Firefly iCore-3588Q SoM. Specification: - Rockchip RK3588 - LPDDR5X 16/32 GB - eMMC 128/256 GB - HDMI Type A out x 1 - USB 3.0 Host x 1 - USB-C 3.0 with DisplayPort AltMode - PCIE M.2 E Key for Wireless connection - PCIE M.2 M Key for NVME connection - DSI to eDP panel - 1Gb Ethernet w/ Microchip KSZ9310 PHY Tested using Fedora boot on USB stick and eMMC. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: add Lunzn FastRhino R66STianling Shen
Lunzn Fastrhino R66S is a high-performance mini router. Specification: - Rockchip RK3568 - 1/2GB LPDDR4 RAM - SD card slot - 2x USB 3.0 Port - 2x 2500 Base-T (PCIe, r8125b) - 12v DC Jack Signed-off-by: Tianling Shen <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: Add ArmSoM Sige1Jonas Karlman
The Sige1 is a single board computer developed by ArmSoM, based on the Rockchip RK3528A SoC. Add support for the ArmSoM Sige1 board. Features tested on a ArmSoM Sige1 v1.1: - SD-card boot - eMMC boot - Ethernet - USB host (with pending DT changes) Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: Add Radxa ROCK 2A/2FJonas Karlman
The ROCK 2 Family is a high-performance SBC (Single Board Computer) developed by Radxa, based on the Rockchip RK3528A. The Radxa E20C shares some board characteristics with the ROCK 2 family boards. Add support for the ROCK 2A and 2F boards. The radxa-e20c-rk3528 target is also extended to support booting ROCK 2 boards. Features tested on a ROCK 2A v1.202: - SD-card boot - Ethernet - USB host (with pending DT changes) Features tested on a ROCK 2F v1.016: - SD-card boot - eMMC boot - USB host (with pending DT changes) Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: Add FriendlyElec NanoPi M5Jonas Karlman
FriendlyElec NanoPi M5 with Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Features tested on a NanoPi M5 2411: - SD-card boot - SPI flash boot - Ethernet - LEDs - PCIe/NVMe - USB HOST/OTG - USER button Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: Add Luckfox Omni3576Jonas Karlman
Luckfox Omni3576 Carrier Board with Core3576 Module, powered by the Rockchip RK3576 SoC with four Cortex-A72 cores, four Cortex-A53 cores, and a Mali-G52 MC3 GPU. Features tested with a Core3576 Rev1.1 on a Omni3576 carrier board: - SD-card boot - eMMC boot - LED - PCIe/NVMe - USB2.0 HOST Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-11-02board: rockchip: Add Radxa ROCK 4DJonas Karlman
The Radxa ROCK 4D is a compact single-board computer (SBC) featuring numerous top-tier functions, features, and expansion options. Equipped with the Rockchip RK3576 or RK3576J SoC, the ROCK 4D boasts an octa-core CPU (4x Cortex-A72 + 4x Cortex-A53), Mali-G52 GPU, and a powerful 6 TOPS NPU, making it ideal for AI and multimedia tasks. Features tested on a Radxa ROCK 4D v1.112: - SPI Flash boot - Ethernet - PCIe/NVMe - USB host ROCK 4D boards with SPI Flash is configured to boot from FSPI0->UFS->USB, or directly from USB when the MASKROM button is pressed, booting directly from SD-card is not possible on these boards. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-08-30board: rockchip: Add Xunlong Orange Pi 5 UltraNiu Zhihong
The Orange Pi 5 Ultra is another board in the Orange Pi 5 family. Orange Pi 5 Ultra uses Rockchip RK3588, a new generation of octa-core 64-bit ARM processor, which includes quad-core A76 and quad-core A55. Features tested on a Orange Pi 5 Ultra 16GB: - SD-card boot - eMMC boot ROCKCHIP_TPL: https://github.com/rockchip-linux/rkbin/tree/master/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2400MHz_v1.18.bin BL31: https://github.com/rockchip-linux/rkbin/tree/master/bin/rk35/rk3588_bl31_v1.48.elf Signed-off-by: Niu Zhihong <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-08-30board: rockchip: Add ArmSoM Sige5Jonas Karlman
ArmSoM-Sige5 adopts the second-generation 8nm high-performance AIOT platform Rockchip RK3576, with a 6 TOPS computing power NPU and support for up to 16GB of large memory. It supports 4K video encoding and decoding, offers rich interfaces including dual gigabit Ethernet ports, WiFi 6 & BT5, and various video outputs. Features tested on a ArmSoM Sige5 v1.1: - SD-card boot - eMMC boot - Ethernet - PCIe NVMe Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-08-30board: rockchip: Add minimal generic RK3576 boardJonas Karlman
Add a minimal generic RK3576 board that only have eMMC, SDMMC and USB OTG enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3576 boards that follow reference board design. eMMC and SD-card boot tested on: - ArmSoM CM5 - ArmSoM Sige5 - FriendlyElec NanoPi M5 - Luckfox Omni3576 - Toybrick TB-RK3576D Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-08-30rockchip: Add support for GameForce AceChris Morgan
The GameForce Ace is an RK3588S based handheld gaming device. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-05-08board: rockchip: Add LCKFB TaishanPi RK3566 BoardJiehui He
The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC. Specification: - 1/2 Gib RAM - Optinal EMMC - SD-Card - HDMI / MIPI CSI / MIPI DSI - USB 2.0 Host (Type-A) - USB 2.0 Host / OTG (Type-C) - No Ethernet This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including: - U-Boot device tree - Default defconfig - Board documentation - MAINTAINERS entry Changes in v2: - Removed unused configs from `lckfb-tspi-rk3566_defconfig` - Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically Link to v1: https://lore.kernel.org/u-boot/[email protected]/ Signed-off-by: Jiehui He <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-05-08board: rockchip: add Xunlong Orange Pi 5 MaxIlya Katsnelson
The 5 Max is another board in the Orange Pi 5 family. It's overall similar to the 5 Plus, but in a smaller form factor, which leads to some I/O being reshuffled, but nothing relevant to u-boot. So, just reuse the config for the 5 Plus and adjust the DT names. Reviewed-by: Jonas Karlman <[email protected]> Signed-off-by: Ilya Katsnelson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-04-23board: rockchip: Add minimal generic RK3399 boardJonas Karlman
Add a minimal generic RK3399 board that only have eMMC, SDMMC, SPI flash and USB OTG enabled. This defconfig can be used to boot from eMMC, SD-card or SPI flash on most RK3399 boards that follow reference board design. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Christopher Obbard <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-04-23board: rockchip: Add minimal generic RK3328 boardJonas Karlman
Add a minimal generic RK3328 board that only have eMMC, SDMMC, SPI flash and USB OTG enabled. This defconfig can be used to boot from eMMC, SD-card or SPI flash on most RK3328 boards that follow reference board design. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Christopher Obbard <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-04-23rockchip: rk3576: Add support for ROC-RK3576-PC boardHeiko Stuebner
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576 SoC. This adds the needed board infrastructure and config for it. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-04-23arm: rockchip: Add RK3576 arch core supportXuhui Lin
The Rockchip RK3576 is a ARM-based SoC with quad-core Cortex-A72 and quad-core Cortex-A53 including 6TOPS NPU, Mali-G52 MC3, HDMI Out, DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, UFS, USB OTG 3.0, Type-C, USB 2.0, PCIe 2.1, SATA 3, Ethernet, SDIO3.0, I2C, UART, SPI, GPIO and PWM. Add arch core support for it. Signed-off-by: Xuhui Lin <[email protected]> [adapted for mainline u-boot] Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-04-23board: rockchip: Add Radxa E20CJonas Karlman
The Radxa E20C is an ultra-compact network computer with a RK3528A SoC that offers a wide range of networking capabilities. Features tested on a Radxa E20C v1.104: - SD-card boot - eMMC boot Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-04-23board: rockchip: Add minimal generic RK3528 boardJonas Karlman
Add a minimal generic RK3528 board that only have eMMC and SD-card enabled. This defconfig can be used to boot from eMMC or SD-card on most RK3528 boards that follow reference board design. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-01-10rockchip: Add support for Radxa ROCK 5CFUKAUMI Naoki
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer. [1] https://radxa.com/products/rock5/5c Signed-off-by: FUKAUMI Naoki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2025-01-10board: rockchip: add FriendlyElec NanoPi R3STianling Shen
The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps Ethernet ports designed and developed by FriendlyElec for IoT applications. Specification: - Rockchip RK3566 - 2GB LPDDR4X RAM - optional 32GB eMMC module - SD card slot - 2x 1000 Base-T - 3x LEDs (POWER, LAN, WAN) - 2x Buttons (Reset, MaskROM) - 1x USB 3.0 Port - Type-C 5V 2A Power Signed-off-by: Tianling Shen <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Kever Yang <[email protected]>
2025-01-10board: rockchip: add Khadas Edge2 RK3588 boardJacobe Zang
Khadas Edge2 is a Rockchip RK3588S based SBC (Single Board Computer) by Khadas. There are tree variants depending on the DRAM size : 8G and 16G. Specification: Rockchip RK3588S SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB memory LPDDR4x Mali G610MP4 GPU 3x MIPI CSI 4x lanes 2x MIPI-DSI DPHY 4x lanes 32/64GB eMMC 1x USB 2.0, 1x USB 3.0, 2x USB-Type-C 1x HDMI 2.1 output, 1x DP 1.4 output USB PD over USB Type-C Kernel commit: 04d552993522 ("arm64: dts: rockchip: Add Khadas edge2 board") Signed-off-by: Jacobe Zang <[email protected]>
2024-11-11board: rockchip: Add FriendlyElec NanoPi R2S PlusJonas Karlman
The FriendlyElec NanoPi R2S Plus is a single-board computer based on Rockchip RK3328 SoC. It features e.g. 1 GB DDR4 RAM, 32 GB eMMC, SD-card, 2x GbE LAN, optional M.2 SDIO Wi-Fi and 2x USB 2.0 host. Features tested on a NanoPi R2S Plus 2309: - SD-card boot - eMMC boot - Ethernet - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-11-11board: rockchip: Add support for rk3588 GenBookAndy Yan
Add support for Cool Pi GenBook, it works as a carrier board connect with CM5 SOM. Specification: - Rockchip RK3588 - LPDDR5X 8/32 GB - eMMC 64 GB - HDMI Type A out x 1 - USB 3.0 Host x 1 - USB-C 3.0 with DisplayPort AltMode - PCIE M.2 E Key for RTL8852BE Wireless connection - PCIE M.2 M Key for NVME connection - eDP panel with 1920x1080 Tested by Armbian boot on USB disk. Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03 Signed-off-by: Andy Yan <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-11-11board: rockchip: add support for Qnap TS433 devicesHeiko Stuebner
The Qnap TS433 is a 4-bay NAS based around the RK3568. Two SATA bays are connected to the RK3568's own SATA controllers while the other two are connected to a JMicron SATA controller living on the PCIe bus. It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-10-25board: rockchip: Add Hardkernel ODROID-M1SJonas Karlman
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0. Features tested on a ODROID-M1S 8GB rev1.0 20230906: - SD-card boot - eMMC boot - Ethernet - PCIe/NVMe - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-10-25board: rockchip: Add Hardkernel ODROID-M2Jonas Karlman
The Hardkernel ODROID-M2 is a single-board computer based on Rockchip RK3588S2 SoC. It features e.g. 8/16 GB LPDDR5 RAM, 64 GB eMMC, SD-card, GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0/Type-C. Features tested on a ODROID-M2 16GB rev1.0 20240611: - SD-card boot - eMMC boot - Ethernet - PCIe/NVMe - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-10-04Update directories for new name of TF-A directoriesPeter Robinson
The TF-A URL was updated, as a result the name of the directory changed as part of the new git URL and not all the referenced directories were updated. Fixes: 0ec0207fe07 ("Update the ARM trusted firmware git URL") Signed-off-by: Peter Robinson <[email protected]>
2024-10-03Update the ARM trusted firmware git URLPeter Robinson
The primary upstream URL for tf-a has moved, in some cases things like tags are not always pushed to the old URL so update the URLs to the primary upstream project URL. Signed-off-by: Peter Robinson <[email protected]>
2024-08-12board: rockchip: Add Radxa ROCK 5 ITXHeiko Stuebner
The Rock 5 ITX is a board in ITX form factor using the RK3588 SoC It can be powered either by 12V, ATX power-supply or PoE. Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot, 2*2.5Gb PCIe-connected Ethernet NICs. Display options are 2*HDMI, DP via USB-c, eDP + 2*DSI via PCB connectors. USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel connector. Schematics for the board can be found on - https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf - https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf The naming scheme with the dashes follows Dragan's comment on the mainline devicetree commit: "the name of this board deviates from the standard Radxa naming scheme, which is something like "ROCK <number><letter>" thus, "rock-5a" is fine, but it should be "rock-5-itx", simply because there's a space between "5" and "ITX" in "ROCK 5 ITX" Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Kever Yang <[email protected]>
2024-08-09board: rockchip: Add FriendlyElec CM3588 NASJonas Karlman
The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based on the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board. Features tested on a CM3588 NAS Kit with 8GB RAM 64GB eMMC module: - SD-card boot - eMMC boot - Ethernet - PCIe/NVMe - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-08-09board: rockchip: Add Xunlong Orange Pi 3BRicardo Pardini
The Xunlong Orange Pi 3B is a single-board computer based on the Rockchip RK3566 SoC. The two hw revisions use different io-voltage for Ethernet PHY and can be identified using GPIO4_C4: - v1.1.1: x (internal pull-down) - v2.1: PHY_RESET (external pull-up) Implement rk_board_late_init() to set correct fdtfile env var and board_fit_config_name_match() to load correct FIT config based on what board is detected at runtime so a single board target can be used for both hw revisions. Minimal DTs that includ DT from dts/upstream is added to support booting from both hw revision and only set Ethernet PHY io-voltage when the hw revision is detected at runtime. A side-affect of this is that defconfig show OF_UPSTREAM=n, however dts/upstream DTs is used for this board. Features tested on Orange Pi 3B 4GB (v1.1.1 and v2.1): - SD-card boot - eMMC boot - SPI Flash boot - Ethernet - PCIe/NVMe - USB host Signed-off-by: Ricardo Pardini <[email protected]> Co-developed-by: Jonas Karlman <[email protected]> Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-08-09board: rockchip: Add Radxa ZERO 3W/3EJonas Karlman
The Radxa ZERO 3W/3E is an ultra-small, high-performance single board computer based on the Rockchip RK3566, with a compact form factor and rich interfaces. Implement rk_board_late_init() to set correct fdtfile env var and board_fit_config_name_match() to load correct FIT config based on what board is detected at runtime so a single board target can be used for both board models. Features tested on a ZERO 3W 8GB v1.11: - SD-card boot - eMMC boot - USB gadget - USB host Features tested on a ZERO 3E 4GB v1.2: - SD-card boot - Ethernet - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Tested-by: FUKAUMI Naoki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-08-09board: rockchip: Add Radxa ROCK 3BJonas Karlman
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Features tested on ROCK 3B 8GB v1.51 (both variants): - SD-card boot - eMMC boot - SPI Flash boot - Ethernet - PCIe/NVMe - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Tested-by: FUKAUMI Naoki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-08-09board: rockchip: add Radxa ROCK 3 Model CMaxim Moskalets
Based on rock-3a-rk3568_defconfig. Tested on v1.31 revision. Board Specifications: - Rockchip RK3566 - 1/2/4GB LPDDR4 2112MT/s - eMMC socket - uSD card slot - M.2 2230 Connector - GbE LAN with POE - 3.5mm jack with mic - HDMI 2.0, MIPI DSI/CSI - USB 3.0 Host, USB 2.0 Host/OTG - 40-pin GPIO expansion ports Signed-off-by: Maxim Moskalets <[email protected]> Suggested-by: Jonas Karlman <[email protected]> Reviewed-by: Jonas Karlman <[email protected]> Tested-by: FUKAUMI Naoki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-08-09board: rockchip: Add Radxa ROCK S0Jonas Karlman
Radxa ROCK S0 is a single-board computer based on the Rockchip RK3308B SoC in an ultra-compact form factor. Add a board target for the board. Features tested on a ROCK S0 v1.2 with 512 MiB RAM and 8 GiB eMMC: - SD-card boot - eMMC boot - Ethernet - USB gadget - USB host Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-07-17board: rockchip: Add FriendlyElec NanoPi R6SSebastian Kropatsch
The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s. It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage, one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC connector, a fan connector, IR receiver as well as some buttons and LEDs. Add initial support for this board using the upstream devicetree sources. Kernel commit: f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S") Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Sebastian Kropatsch <[email protected]>
2024-07-17board: rockchip: Add FriendlyElec NanoPi R6CSebastian Kropatsch
The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s. It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125 2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs. Add initial support for this board using the upstream devicetree sources. Tested in U-Boot proper: - Booting from eMMC works - 1GbE Ethernet works using the eth_eqos driver (tested by ping) - 2.5GbE Ethernet works using the eth_rtl8169 driver (tested by ping), but the status LEDs on this specific port currently aren't working - NVMe SSD in M.2 socket does get recognized (tested with `nvme scan` followed by `nvme details`) Kernel commit: d5f1d7437451 ("arm64: dts: rockchip: Add support for NanoPi R6C") Reviewed-by: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Sebastian Kropatsch <[email protected]>
2024-07-17rockchip: remove support for Theobroma Systems RK3368 LionQuentin Schulz
No meaningful changes were made to this SoM since February 2021. Nobody from Theobroma has booted anything recent on that product since July 2021 at the latest. The product isn't available to buy anymore and disappeared from our website. This product is therefore unmaintained and it would be disingenuous to say the opposite, so drop support for RK3368 Lion. If you're a user of Lion, feel free to revert this patch or contact our sales/support department. Signed-off-by: Quentin Schulz <[email protected]> Acked-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-06-14rockchip: add support for Theobroma Systems SOM-RK3588-Q7 Tiger moduleQuentin Schulz
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3588. It provides the following feature set: * up to 16GB LPDDR4x * on-module eMMC * SD card (on a baseboard) via edge connector * Gigabit Ethernet with on-module GbE PHY * HDMI/eDP * MIPI-DSI * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7) * HDMI input over FPC connector * CAN * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 host * PCIe - 1x PCIe 2.1 Gen3, 4 lanes - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes * on-module ATtiny816 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) * on-module Secure Element with Global Platform 2.2.1 compliant JavaCard environment The support is added for Tiger on Haikou devkit, similarly to RK3399 Puma and PX30 Ringneck. Cc: Quentin Schulz <[email protected]> Signed-off-by: Quentin Schulz <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-06-14board: rockchip: add ArmSoM Sige7 Rk3588 boardJianfeng Liu
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by ArmSoM. There are two variants depending on the DRAM size : 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB memory LPDDR4x Mali G610MC4 GPU 2x MIPI CSI 2 multiple lanes connector 64GB/128GB on board eMMC uSD slot 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C 1x HDMI 2.1 output 2x 2.5 Gbps Ethernet port 40-pin IO header including UART, SPI and I2C USB PD over USB Type-C Size: 92mm x 62mm Kernel commit: 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) Signed-off-by: Jianfeng Liu <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-05-25board: rockchip: Add Indiedroid NovaChris Morgan
The Indiedroid Nova is a Rockchip RK3588S based SBC from Indiedroid. Specifications: Rockchip RK3588S SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU Optional eMMC 2x USB 2.0, 2x USB 3.0, 1x USB 3.0 C port with DP Alt 1x MIPI-CSI Port (4-lane or 2x 2-lane) 1x MIPI-DSI 4-lane connector 1x Micro HDMI 2.1 output, 1x DP 1.4 output Gigabit Ethernet Realtek RTL8821CS WiFi 4 pin debug UART connector 40 pin GPIO header Size: 85mm x 56mm (Raspberry Pi Form Factor) Kernel commit: 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board") Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-05-25board: rockchip: add Powkiddy X55Chris Morgan
The Powkiddy X55 is a Rockchip RK3566 based handheld gaming device. UART, ADC, eMMC, and SDMMC are tested to work in U-Boot and this successfully boots mainline Linux. Kernel commit: e99adc97e21a ("arm64: dts: rockchip: Add Powkiddy X55") Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2024-04-26rockchip: rk3588-coolpi: Add boards to documentationJonas Karlman
Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation. Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Dragan Simic <[email protected]> Reviewed-by: Kever Yang <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-12 22:22:09 +0000