| Age | Commit message (Collapse) | Author |
|---|
|
Describe build with OpenSBI fw_dynamic.bin path as OPENSBI=<path> on the
same line instead of as an export. Also remedy a typo which had the wrong
directory path before the filename.
Fixes: 8304f3226700 ("doc: board: starfive: update jh7110 common description")
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Describe build with output directory as O=<dir> environment variable
and not unrelated -O <output sync> command line argument.
Fixes: 8304f3226700 ("doc: board: starfive: update jh7110 common description")
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
OrangePi RV is a board that uses the same EEPROM product serial identifier
as the StarFive VisionFive 2 1.3b.
In fact it is not completely compatible with the StarFive VisionFive 2
1.3b for use with Linux Kernel however it is good enough for use with
U-Boot SPL and U-Boot Main. Describe how to set the devicetree search path
and, for advanced users, suggest that it is possible to update the EEPROM
data with an invented "XOPIRV" identifier for automatic board detection.
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Updates to the JH7110 common description:
- add detailed overview of JH-7110 SoC and boot process
- revise descriptions of deprecated StarFive loader modes
- refresh build directions grouped with SPL debug advice
- reduce usage instructions into common methods shared by supported boards
- cite starfive_visionfive2 board maintainer description of StarFive loader
- cite published datasheets for ambient operating temperature data
Redundant/deprecated sections of each board doc are dropped accordingly:
- deepcomputing fml13v01
- milk-v mars
- pine64 star64 (also add inclusion of JH7110 common description)
- visionfive2
Signed-off-by: E Shattow <[email protected]>
|
|
This patch is not as E Shattow authored it, but contains non-trivial
changes from Heinrich Schuchardt as well. The original author has
requested that this commit be reverted until the changes can be
committed showing which parts were authored by E Shattow and which by
Heinrich Schuchardt.
This reverts commit 4c105d2ae7b0f847668ff1ef6b410f63ab4290b7.
Signed-off-by: Tom Rini <[email protected]>
|
|
Updates to the JH7110 common description:
- add detailed overview of JH-7110 SoC and boot process
- revise descriptions of deprecated StarFive loader modes
- refresh build directions grouped with SPL debug advice
- reduce usage instructions into common methods shared by supported boards
- cite starfive_visionfive2 board maintainer description of StarFive loader
- cite published datasheets for ambient operating temperature data
Redundant/deprecated sections of each board doc are dropped accordingly:
- deepcomputing fml13v01
- milk-v mars
- pine64 star64 (also add inclusion of JH7110 common description)
- visionfive2
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Add initial board docs for Milk-V Mars CM (eMMC) and Milk-V Mars CM Lite
(SD Card) to the visionfive2 board target.
Signed-off-by: E Shattow <[email protected]>
|
|
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Provide the settings for using the debug UART in SPL.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
To avoid duplicate maintenance just include jh7110_common.rst to describe
the usage of the different boot sources.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Always use ---- for the H2 level.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Describe building U-Boot for the board and booting.
Carve out common information for JH7110 boards into an include.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Remove leftover code from Milk-V Mars CM and Mars CM Lite boards that do
not exist in upstream Linux Kernel devicetree-rebasing. These will be re-
introduced when submitted upstream for a future U-Boot release. Users of
these boards should use the previous stable release of U-Boot until then.
Signed-off-by: E Shattow <[email protected]>
|
|
Before adding more files, move the bootstd docs into a new directory,
with an index.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Add documentation files
Signed-off-by: Henry Bell <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: E Shattow <[email protected]>
|
|
Provide a man-page describing the usage of U-Boot on
the Milk-V Mars CM and Milk-V Mars CM Lite boards.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: E Shattow <[email protected]>
|
|
Add instructions to build U-Boot for the Milk-V Mars board
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Currently in set_fdtfile() we set the value of environment variable fdtfile
unconditionally. The implies that a value in the environment will be
ignored.
With the patch environment variable fdtfile will only be set if it does not
yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set.
Now the user can either set and save fdtfile interactively or in the U-Boot
configuration to overrule the device-tree name chosen based on the
hardware in set_fdtfile().
Reported-by: E Shattow <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The rendering of the OpenSBI logo should look like the screen output.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Title underlines should match the length of the title. Unfortunately
docutils only catches underlines that are too short.
Add some missing empty lines after titles.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
The StarFive VisionFive 2 board cannot load spl/u-boot-spl.bin but needs a
prefixed header. We have referring to a vendor tool (spl_tool) for this
task. 'mkimage -T sfspl' can generate the prefixed file.
Use binman to invoke mkimage for the generation of file
spl/u-boot-spl.bin.normal.out.
Update the documentation.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
Since PLDA PCIE driver is added and VL805 support is enabled in
defconfig for Starfive Visionfive 2, modify the document to keep
consistent.
Signed-off-by: Shengyu Qu <[email protected]>
Tested-by: Milan P. Stanić <[email protected]>
|
|
Apply the trailing space changes in the guide document.
Signed-off-by: Chanho Park <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The defconfig file name for StarFive VisionFive2 has been changed, and
the documentation description has also changed.
Signed-off-by: Yanhong Wang <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The number of the partition that U-Boot SPL loads the main U-Boot from is
defined as 2 by CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2. The
partition type GUID is not used currently.
Reword the description of the boot process to make it clearer.
Fixes: 5ecf9b0b8a75 ("board: starfive: add StarFive VisionFive v2 board support")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Support for the VisionFive 2 board is not contained in the most recent
OpenSBI release (v1.2).
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Add board support for StarFive VisionFive v2.
Signed-off-by: Yanhong Wang <[email protected]>
Tested-by: Conor Dooley <[email protected]>
|
