summaryrefslogtreecommitdiff
path: root/doc/board/toradex
AgeCommit message (Collapse)Author
2026-03-27doc: board: fix OPTEE args for TI SoCsAnshul Dalal
CFG_WITH_SOFTWARE_PRNG=y was added as an OPTEE argument to workaround some bugs related to TRNG which have been fixed now[1]. Therefore this patch drops the redundant argument from the documentation. [1]: https://github.com/OP-TEE/optee_os/commit/e313f4765fd0478bb66985827441411793433773 Signed-off-by: Anshul Dalal <[email protected]> Acked-by: Francesco Dolcini <[email protected]> # Toradex Verdin AM62
2025-12-16board: toradex: add aquila am69 supportEmanuele Ghidoli
Add initial support for the Toradex Aquila AM69 module. The Aquila AM69 SoM is based on the TI AM69 SoC from the Jacinto 7 family and is designed for high-end embedded computing, featuring up to 32GB of LPDDR4 and 256GB eMMC storage, extensive multimedia support (3x Quad CSI, 2x Quad DSI, DisplayPort, 5x Audio I2S/TDM), six Ethernet interfaces (1x 1G, 4x 2.5G SGMII, 1x 10G), USB 3.2 Host/DRD support, and a Wi-Fi 7/BT 5.3 module, alongside an RX8130 RTC, I2C EEPROM and Temperature Sensor, and optional TPM 2.0 module. Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69 Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit Signed-off-by: Emanuele Ghidoli <[email protected]> Co-developed-by: Parth Pancholi <[email protected]> Signed-off-by: Parth Pancholi <[email protected]> Co-developed-by: Franz Schnyder <[email protected]> Signed-off-by: Franz Schnyder <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]>
2025-12-06doc: board: verdin-am62p: Fix boot log outputFrancesco Dolcini
Fix boot log output not being rendered correctly, fix it doing the same as done in verdin-am62.rst. Fixes: b8c43968b801 ("board: toradex: add verdin am62p support") Signed-off-by: Francesco Dolcini <[email protected]>
2025-10-30board: toradex: add Toradex SMARC iMX95João Paulo Gonçalves
Add support for the Toradex SMARC iMX95. Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit Signed-off-by: João Paulo Gonçalves <[email protected]> Co-developed-by: Emanuele Ghidoli <[email protected]> Signed-off-by: Emanuele Ghidoli <[email protected]> Co-developed-by: Max Krummenacher <[email protected]> Signed-off-by: Max Krummenacher <[email protected]> Co-developed-by: Ernest Van Hoecke <[email protected]> Signed-off-by: Ernest Van Hoecke <[email protected]>
2025-06-03board: toradex: add verdin am62p supportParth Pancholi
This adds initial support for the Toradex Verdin AM62P module. The module consists of an TI AM62P family SoC, a TPS65219 PMIC, a Gigabit Ethernet PHY, up to 8GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an RX8130 RTC, plus an optional Bluetooth/Wi-Fi module. These specific changes adds support for Toradex Verdin AM62P Quad 2GB WB IT module. Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit Signed-off-by: Parth Pancholi <[email protected]> Signed-off-by: Vitor Soares <[email protected]>
2025-04-11board: toradex: add Toradex SMARC iMX8MPVitor Soares
Add support for the Toradex SMARC iMX8MP. Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit Signed-off-by: Vitor Soares <[email protected]>
2024-08-08doc: ti: k3: Add TIFS Stub documentationDhruva Gole
* Add documentation to briefly explain the role of TIFS Stub in relevant K3 SoC's. * Shed light on why TIFS Stub isn't package with the DM firmware itself. * Modify the platform docs wherever the TIFS Stub documentation applies. * Also, refactor and add a few new labels to help split the firmware documentation chunks. This will make it easier to include them one by one wherever applicable Reviewed-by: Nishanth Menon <[email protected]> Signed-off-by: Dhruva Gole <[email protected]> Acked-by: Francesco Dolcini <[email protected]> # verdin-am62
2024-03-21doc: board: apalis-imx8: Update and improve documentationHiago De Franco
Update and improve the building documentation of Apalis iMX8. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco <[email protected]>
2024-03-21doc: board: colibri-imx8x: Update and improve documentationHiago De Franco
Update and improve the building documentation of Colibri iMX8X. The following changes were made: - imx-atf repository changed to nxp-imx GitHub. - imx-atf branch updated to 'lf_v2.6'. - imx-seco updated to version 5.8.7. - nxp-imx mfgtools link updated to GitHub releases. - General writing improvements. Signed-off-by: Hiago De Franco <[email protected]> Reviewed-by: Francesco Dolcini <[email protected]>
2023-09-02doc: board: toradex: verdin-am62: document update u-boot wrapperMarcel Ziswiler
Now with the update U-Boot wrappers having been sorted out, document their usage. Signed-off-by: Marcel Ziswiler <[email protected]>
2023-09-02doc: board: toradex: minor documentation updateMarcel Ziswiler
- Update SPDX-License-Identifier from obsolete GPL-2.0+ to GPL-2.0-or-later. - Add links to product websites of SoM and carrier board where missing. - Add information about update U-Boot wrapper where missing. - Add sectionauthor where missing. - Update information about imx-seco from version 3.7.4 to 3.8.1. - Various minor grammatic and spelling fixes. - Improve whitespace by adding or removing new lines. - Change from code-block for output to just Output::. Signed-off-by: Marcel Ziswiler <[email protected]>
2023-08-09doc: board: toradex: fix verdin module outputMarcel Ziswiler
Fix the Verdin module output which was missing white space for correct rendering. While at it also leave product links, add section author also for the Verdin iMX8M Mini and Plus, and add a missing CROSS_COMPILE export for the Verdin iMX8M Mini. Signed-off-by: Marcel Ziswiler <[email protected]> Reviewed-by: Nishanth Menon <[email protected]> #verdin-am62 Reviewed-by: Tom Rini <[email protected]>
2023-08-04board: toradex: add verdin am62 supportMarcel Ziswiler
This adds initial support for the Toradex Verdin AM62 Quad 1GB WB IT V1.0A module and subsequent V1.1 launch configuration SKUs. They are strapped to boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, DFU support is disabled for now due to missing AM62x USB support. The device trees were taken straight from Linux v6.5-rc1. Boot sequence is: SYSFW ---> R5 SPL (both in tiboot3.bin) ---> ATF (TF-A) ---> OP-TEE ---> A53 SPL (part of tispl.bin) ---> U-boot proper (u-boot.img) Signed-off-by: Marcel Ziswiler <[email protected]> Reviewed-by: Nishanth Menon <[email protected]>
2023-01-31imx: Suggest the NXP ATF github repoFabio Estevam
As explained in the text at the bottom of the page https://source.codeaurora.org/external/imx/imx-atf: "QUIC repositories on this site will not receive any updates after March 31, 2022, and will be deleted on March 31, 2023." Point to the NXP ATF github repo instead. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Oliver Graute <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Reviewed-by: Frieder Schrempf <[email protected]>
2022-04-21toradex: apalis-imx8x: drop support for apalis imx8xDenys Drozdov
Drop Apalis iMX8X platform as it never left sample state and is no longer supported. Signed-off-by: Denys Drozdov <[email protected]> Signed-off-by: Marcel Ziswiler <[email protected]>
2022-02-07board: toradex: add verdin imx8m plus supportMarcel Ziswiler
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2022-02-05doc: verdin-imx8mm: Remove ATF_LOAD_ADDR exportFabio Estevam
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties. Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Patrick Wildt <[email protected]>
2021-10-20verdin-imx8mm: switch to use binman to pack imagesMarcel Ziswiler
Use binman to pack images. Signed-off-by: Marcel Ziswiler <[email protected]> Reviewed-by: Heiko Thiery <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2021-09-11doc: board: toradex: fix file namesOleksandr Suvorov
Fix the documentation file names: s/apalix/apalis/. Fixes: e98ea49a0e ("toradex: MAINTAINERS: entries for new reST docs") Fixes: 3730106cf0 ("doc: board: apalis-imx8x: add documentation") Signed-off-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]> Acked-by: Francesco Dolcini <[email protected]> Acked-by: Marcel Ziswiler <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-08-09board: colibri-imx8x: update building documentationOleksandr Suvorov
Update the documentation on how to build the u-boot image for Colibri iMX8QXP, adding support of V1.0D revision of the module. Signed-off-by: Oleksandr Suvorov <[email protected]>
2021-04-17board: toradex: apalis-imx8x: fix build warningHeinrich Schuchardt
The length of an underline must match the length of the header. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]>
2021-04-08board: toradex: apalis-imx8x: fix build instructionsOleksandr Suvorov
Fix an URL for downloading the SCFW binary for an Apalis iMX8X and improve u-boot image build instructions. Signed-off-by: Oleksandr Suvorov <[email protected]>
2020-12-06doc: board: apalis-imx8x: add documentationIgor Opaniuk
This documents the u-boot build and deployment procedure. Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]>
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2020-06-02imx: Remove ARCH= references from documentationTom Rini
When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline. Cc: Adam Ford <[email protected]> Cc: Vanessa Maegima <[email protected]> Cc: Otavio Salvador <[email protected]> Cc: Igor Opaniuk <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2020-04-04doc: board: verdin-imx8mm: use mainline TF-AIgor Opaniuk
1. Update build steps where mainline Trusted Firmware A is used. 2. Fix BL31_BASE to the proper one according to the SoC reference manual. Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-03-05doc: board: colibri-imx8x: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2020-03-05doc: board: apalis-imx8: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]>
2020-03-05doc: board: verdin-imx8mm: convert readme to reSTIgor Opaniuk
Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> [bmeng: spell out U-Boot correctly] Signed-off-by: Bin Meng <[email protected]>
2020-03-05doc: board: toradex: add colibri_imx7.rstIgor Opaniuk
- add initial index for toradex boards reST documentation - add initial colibri_imx7.rst doc file which provides all needed information for obtaining a workable image ready for flashing for both eMMC/NAND versions of Colibri iMX7. Signed-off-by: Igor Opaniuk <[email protected]> Reviewed-by: Bin Meng <[email protected]> Reviewed-by: Oleksandr Suvorov <[email protected]> Tested-by: Bin Meng <[email protected]> [bmeng: make title underline the same length as the title itself] Signed-off-by: Bin Meng <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-13 00:57:17 +0000