| Age | Commit message (Collapse) | Author |
|---|
|
Remove redundant device tree files now that RK3399 boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
If 'env print -e' is invoked without variable name, all UEFI variables are
listed.
Describe that 'env print -e' requires CONFIG_HEXDUMP=y to print content of
UEFI variables.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation.
Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB")
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Dragan Simic <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Support for Schneider Electric HMIBSC. Features:
- Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306)
- 2GiB RAM
- 64GiB eMMC, SD slot
- WiFi and Bluetooth
- 2x Host, 1x Device USB port
- HDMI
- Discrete TPM2 chip over SPI
Features enabled in U-Boot:
- RAUC updates
- Environment protection
- USB based ethernet adaptors
Signed-off-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
The driver currently requires the bit clock divider be hardcoded in
devicetree (or use the hardcoded default from apq8016).
The bit clock divider is used to derive the baud rate from the core
clock:
baudrate = clk_rate / csr_div
clk_rate is the actual programmed core clock rate which is returned by
clk_set_rate(), and this UART driver only supports a baudrate of 115200.
We can therefore determine the appropriate value for UARTDM_CSR by
iterating over the possible values and finding the one where the
equation above holds true for a baudrate of 115200.
Implement this logic and drop the non-standard DT bindings for this
driver.
Tested on dragonboard410c.
Tested-by: Robert Marko <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
While I have said this in various release emails, it should be
documented here as well that the next branch opens with the second
release candidate.
Signed-off-by: Tom Rini <[email protected]>
|
|
* add link to askenv man-page
* add printenv
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
The 'env' man-page is currently only partially sorted.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20240419
- new "fastboot oem board" command
|
|
enabled""
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.
This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.
Link: https://lore.kernel.org/u-boot/[email protected]/
Signed-off-by: Tom Rini <[email protected]>
|
|
Currently, fastboot protocol in U-Boot has no opportunity
to execute vendor custom code with verifed boot. This patch
introduce new fastboot subcommand fastboot oem board:<cmd>,
which allow to run custom oem_board function.
Default implementation is __weak. Vendor must redefine it in
board/ folder with his own logic.
For example, some vendors have their custom nand/emmc partition
flashing or erasing. Here some typical command for such use cases:
- flashing:
$ fastboot stage bootloader.img
$ fastboot oem board:write_bootloader
- erasing:
$ fastboot oem board:erase_env
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
|
|
While we unlikely to have an issue with CVE-2024-3651, it is simple
enough to bump our version of idna to receive the fix, do so.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <[email protected]>
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The README.trace has been moved and converted to rst in commit dce26c7d56ed
("doc: move README.trace to HTML documentation"); fix all the remaining
references to this file.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Simon Glass <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The 2 subsections of this page ("Compatible IDEs" and "Usage") are using
the same header level as the title (with "===").
Because of this, they always appear in the HTML rendered ToC.
Drop the subsections one level lower by replacing "=" by "-".
This fixes the HTML rendering.
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
commit cacc0b2678c0 ("CI: Move to latest container image") updated the
docker container image.
Reflect the change in the documentation.
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Add the environment variable "usb_ignorelist" to prevent USB devices
listed in it from being bound to drivers. This allows to ignore devices
which are undesirable or trigger bugs in u-boot's USB stack.
Devices emulating keyboards are one example of undesirable devices as
u-boot currently supports only a single USB keyboard device. Most
commonly, people run into this with Yubikeys, so let's ignore those in
the default environment.
Based on previous USB keyboard specific patches for the same purpose.
Link: https://lore.kernel.org/u-boot/[email protected]/
Reviewed-by: Neal Gompa <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Janne Grunau <[email protected]>
|
|
This extra binding is non-standard and now unneeded as we bind the
sysreset driver automatically. This matches what is done in Linux
and allows us to more closely match the DTBs. Remove the binding
and all users.
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
Tested-by: Jonathan Humphreys <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series is the culmanation of the current line of refactoring
series. It adjusts pxe to call the booting functionality directly
rather than going through the command-line interface.
With this is is possible to boot using the extlinux bootmeth without
the command line enabled.
It also updates fastboot to do a similar thing.
|
|
At this point most things work, including booting a distro, so drop
this message.
Signed-off-by: Simon Glass <[email protected]>
|
|
The fastboot 'boot' command only supports running a U-Boot command if
CONFIG_CMDLINE is enabled. Mention this in the documentation.
Signed-off-by: Simon Glass <[email protected]>
Suggested-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
|
|
Add instructions to build U-Boot for the Milk-V Mars board
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Currently in set_fdtfile() we set the value of environment variable fdtfile
unconditionally. The implies that a value in the environment will be
ignored.
With the patch environment variable fdtfile will only be set if it does not
yet exist. This requires that CONFIG_DEFAULT_FDT_FILE is not set.
Now the user can either set and save fdtfile interactively or in the U-Boot
configuration to overrule the device-tree name chosen based on the
hardware in set_fdtfile().
Reported-by: E Shattow <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
List all prefix currently used for generating FAT partition names.
Describe which device class uses which prefix.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add :: for correct formatting of example.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Improove documentation, add new revision.
Signed-off-by: Viacheslav Bocharov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[narmstrong: squashed https://lore.kernel.org/all/[email protected]/]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Merge in all changes from the next branch now that the release is out.
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
Add a cross reference to the itest command.
Fix a typo: %s/Example/Examples/.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the itest command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Prepare v2024.04-rc5
|
|
Signed-off-by: Tom Rini <[email protected]>
|
|
%s/Synopis/Synopsis/g
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Provide a man-page for the if command.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Update and improve the building documentation of Apalis iMX8.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <[email protected]>
|
|
Update and improve the building documentation of Colibri iMX8X.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.
Signed-off-by: Hiago De Franco <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
|
|
%s/Synopis/Synopsis/g
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Short reference link names like "dtspec", "dtrepo", "dttweaks" etc.
interrupt the flow of the document text. Lets avoid them and instead
expand in place for better readability.
Suggested-by: Paul Barker <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
Reviewed-by: Paul Barker <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
- A new driver in the misc to register setting from device tree. This
also provides user a clean interface and all register settings are
centralized in one place, device tree.
- Enable Agilex5 platform for Intel product. Changes, modification and
new files are created for board, dts, configs and makefile to create
the base for Agilex5.
Build-tested on SoC64 boards, boot tested on some of them.
|
|
Add socfpga_dtreg driver enablement for Intel SoCFPGA.
Signed-off-by: Wan Yee Lau <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip into next
Please pull the updates for rockchip platform:
- Add board: rk3588 Generic, Cool Pi CM5, Theobroma-Systems RK3588 Jaguar SBC,
Toybrick TB-RK3588X;
rk3588s Cool Pi 4B;
rk3566 Pine64 PineTab2;
- Add saradc v2 support;
- Add PMIC RK806 support;
- rk3588 disable force_jtag by default;
- Migrate to use IO-domain driver for all boards;
- Use common bss and stack addresses for rk33xx and rk35xx boards;
- Other updates for driver, config and dts;
|
|
Add support to the RGxx3 device for the Powkiddy RGB10MAX3. This device
is extremely similar to all the other devices and can use the same
bootloader with the same detection logic.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The Pine64 PineTab2 is a tablet computer based on the Rockchip RK3566
SoC. The table features 4/8 GB LPDDR4 RAM and 64/128 GB eMMC storage.
Features tested on a Pine64 PineTab2 8GB v2.0:
- SD-card boot
- eMMC boot
- SPI Flash boot
- USB host
Device tree is imported from linux maintainer branch v6.9-armsoc/dts64,
commit 1b7e19448f8f ("arm64: dts: rockchip: Add devicetree for Pine64
PineTab2").
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Add a minimal generic RK3588S/RK3588 board that only have eMMC and SDMMC
enabled. This defconfig can be used to boot from eMMC or SD-card on most
RK3588S/RK3588 boards that follow reference board design.
Also fix the alphabetical order of RK3588 boards listed in Makefile and
documentation.
Signed-off-by: Jonas Karlman <[email protected]>
|
|
TB-RK3588X board is a Rockchip Toybrick RK3588 based development board.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB Memory LPDDR4x
Mali G610MC4 GPU
2× MIPI-CSI0 Connector
1x 2Lanes PCIe3.0 Connector
1x SATA3.0 Connector
32GB eMMC Module
2x USB 2.0, 2x USB 3.0
1x HDMI Output, 1x HDMI Input
2x Ethernet Port
Functions work normally:
[1] USB2.0 Host
[2] Ethernet0 with PHY RTL8211F
More information can be obtained from the following websites:
[1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html
[2] http://t.rock-chips.com/
Kernel commits:
8ffe365f8dc7 ("arm64: dts: rockchip: Add devicetree support for TB-RK3588X board")
7140387ff49d ("dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X")
Reviewed-by: Weizhao Ouyang <[email protected]>
Signed-off-by: Elon Zhang <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Update defconfig for rk3328-orangepi-r1-plus boards with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep
support for scripts.
Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is
not included in the SPL fdt.
Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator
commands.
Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and
eth1addr is set based on cpuid read from eFUSE.
Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL.
Add DM_ETH_PHY=y, PHY_GIGE=y, PHY_MOTORCOMM=y, PHY_REALTEK=y and remove
&gmac2io to support reset of onboard ethernet PHYs. Also add DM_MDIO=y
to ensure device tree props is used by motorcomm PHY driver.
Add PHY_ROCKCHIP_INNO_USB2=y option to support the onboard USB PHY.
Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used.
Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random
generator.
Also add missing device tree files to MAINTAINERS file.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Tianling Shen <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Update defconfig for rk3328-nanopi-r2* boards with new defaults.
Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep
support for scripts.
Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is
not included in the SPL fdt.
Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator
commands.
Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and
eth1addr is set based on cpuid read from eFUSE.
Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL.
Add DM_ETH_PHY=y, PHY_GIGE=y, PHY_MOTORCOMM=y, PHY_REALTEK=y and remove
&gmac2io to support reset of onboard ethernet PHYs. Also add DM_MDIO=y
to ensure device tree props is used by motorcomm PHY driver.
Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used.
Add DM_REGULATOR_GPIO=y and SPL_DM_REGULATOR_GPIO=y to support the
regulator-gpio compatible.
Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random
generator.
Also add missing device tree files to MAINTAINERS file.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Tianling Shen <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Update defconfig for rk3328-rock-pi-e with new defaults.
Remove the xPL_DRIVERS_MISC=y option, no misc driver is used in xPL.
Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to DRAM or SRAM. Also add LEGACY_IMAGE_FORMAT=y to keep
support for scripts.
Remove SPL_I2C=y and SPL_PMIC_RK8XX=y, the related i2c and pmic nodes is
not included in the SPL fdt.
Add CMD_GPIO=y and CMD_REGULATOR=y to add the helpful gpio and regulator
commands.
Add ROCKCHIP_EFUSE=y and remove NET_RANDOM_ETHADDR=y, ethaddr and
eth1addr is set based on cpuid read from eFUSE.
Add SPL_DM_SEQ_ALIAS=y option to use alias sequence number in SPL.
Add DM_MDIO=y to ensure device tree props can be used by PHY driver.
Remove REGULATOR_PWM=y, the pwm-regulator compatible is not used.
Add RNG_ROCKCHIP=y and DM_RNG=y options to support the onboard random
generator.
Also add myself as a reviewer for this board.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
