summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-12-23global: Migrate CONFIG_I2C_MVTWSI_BASE0 to CFGTom Rini
Perform a simple rename of CONFIG_I2C_MVTWSI_BASE0 to CFG_I2C_MVTWSI_BASE0 Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FTRTC010_PCLK to CFGTom Rini
Perform a simple rename of CONFIG_FTRTC010_PCLK to CFG_FTRTC010_PCLK Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FTRTC010_EXTCLK to CFGTom Rini
Perform a simple rename of CONFIG_FTRTC010_EXTCLK to CFG_FTRTC010_EXTCLK Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FSL_PMIC_MODE to CFGTom Rini
Perform a simple rename of CONFIG_FSL_PMIC_MODE to CFG_FSL_PMIC_MODE Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FSL_PMIC_CS to CFGTom Rini
Perform a simple rename of CONFIG_FSL_PMIC_CS to CFG_FSL_PMIC_CS Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FSL_PMIC_CLK to CFGTom Rini
Perform a simple rename of CONFIG_FSL_PMIC_CLK to CFG_FSL_PMIC_CLK Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FSL_PMIC_BITLEN to CFGTom Rini
Perform a simple rename of CONFIG_FSL_PMIC_BITLEN to CFG_FSL_PMIC_BITLEN Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FPGA_DELAY to CFGTom Rini
Perform a simple rename of CONFIG_FPGA_DELAY to CFG_FPGA_DELAY Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FEC_MXC_PHYADDR to CFGTom Rini
Perform a simple rename of CONFIG_FEC_MXC_PHYADDR to CFG_FEC_MXC_PHYADDR Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_FB_ADDR to CFGTom Rini
Perform a simple rename of CONFIG_FB_ADDR to CFG_FB_ADDR Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Migrate CONFIG_DW_WDT_CLOCK_KHZ to CFGTom Rini
Perform a simple rename of CONFIG_DW_WDT_CLOCK_KHZ to CFG_DW_WDT_CLOCK_KHZ Signed-off-by: Tom Rini <[email protected]>
2022-12-23global: Remove undef CONFIG_... for unused valuesTom Rini
We have a number of places that undef CONFIG_... while we never reference CONFIG_... in the first place. Remove these lines. Signed-off-by: Tom Rini <[email protected]>
2022-12-23log: Remove some places where we redefine LOGLEVELTom Rini
We cannot redefine a CONFIG value per file in this manner. Signed-off-by: Tom Rini <[email protected]>
2022-12-23atmel_nand: Remove undef during SPL_BUILDTom Rini
We cannot disable features in SPL in this manner, remove the undef here. Signed-off-by: Tom Rini <[email protected]>
2022-12-23mtd: ubi: Finish moving configuration to KconfigTom Rini
We have some unused and undefined symbols to remove references to, so do that. Move the final things that we do set (or need to keep unset) to Kconfig instead. Signed-off-by: Tom Rini <[email protected]>
2022-12-23Convert CONFIG_SYS_FPGA_CHECK_BUSY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FPGA_CHECK_BUSY Signed-off-by: Tom Rini <[email protected]>
2022-12-22nxp: Rename CONFIG_U_BOOT_HDR_SIZE to FSL_U_BOOT_HDR_SIZETom Rini
This is always defined to 16K, so we move this over to include/fsl_validate.h to start with. Next, we rename this from CONFIG_ to FSL_. Coalesce the various comments around this definition to be in fsl_validate.h as well to explain the usage. Signed-off-by: Tom Rini <[email protected]>
2022-12-22usb: Remove CONFIG_USBD_HSTom Rini
This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini <[email protected]>
2022-12-22net: vsc9953: Remove this driverTom Rini
No platforms enable this driver as there's no T1040D4RDB nor T1040RDB support at this time. Remove. Signed-off-by: Tom Rini <[email protected]>
2022-12-22net: Remove more legacy functionsTom Rini
Remove some of the board and arch specific non-DM_ETH helper code. Signed-off-by: Tom Rini <[email protected]>
2022-12-22sandbox: Finish migration to KconfigTom Rini
Stop using CONFIG_SANDBOX_ARCH and use CONFIG_SANDBOX instead. For the SPI related defines, set them directly in Kconfig. This now empties arch/sandbox/include/asm/config.h. Cc: Simon Glass <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-22arm: ti814x: Remove remaining support codeTom Rini
When the ti814x_evm config was removed most, but not all, of the relevant support code was remove. Get rid of what was missed. Fixes: 50b532686849 ("ti814x: Remove platform") Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_MXC_NAND_HWECC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MXC_NAND_HWECC Signed-off-by: Tom Rini <[email protected]>
2022-12-22ddr: fsl: Remove CONFIG_MEM_INIT_VALUETom Rini
The way all of the memory init code here works is that we pass 0xDEADBEEF around for the initial value (as it's a well known 'poison' value and so easily recognized in debuggers, etc). The only point of this CONFIG symbol was to pass in a different value for that purpose. Drop this symbol and cleanup the code slightly. Signed-off-by: Tom Rini <[email protected]>
2022-12-22malta: Rename CONFIG_MALTA to CONFIG_TARGET_MALTATom Rini
Fixup this last remnant of CONFIG_MALTA. Cc: Paul Burton <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_KSNET_NETCP_V1_0 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KSNET_NETCP_V1_0 CONFIG_KSNET_NETCP_V1_5 Signed-off-by: Tom Rini <[email protected]>
2022-12-22global: Remove unused CONFIG symbolsTom Rini
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <[email protected]>
2022-12-22i2c: Remove CONFIG_I2C_MULTI_BUSTom Rini
This functionality is part of the legacy I2C subsystem and is currently unused anywhere. Remove the remaining references. Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_POWER_PCA9450 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_POWER_PCA9450 Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FSL_ESDHC_PIN_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_ESDHC_PIN_MUX Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_FLASH_SHOW_PROGRESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FLASH_SHOW_PROGRESS Signed-off-by: Tom Rini <[email protected]>
2022-12-22fec_mxc: Remove CONFIG_FEC_FIXED_SPEED supportTom Rini
This option is only used on one platform currently. However, with PHYLIB enabled, which this platform also does, this option is not checked and the functional use case is handled. Remove this code. Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_DM9000_BYTE_SWAPPED et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DM9000_BYTE_SWAPPED CONFIG_DM9000_NO_SROM CONFIG_DM9000_USE_16BIT CONFIG_DM9000_DEBUG CONFIG_MXC_GPT_HCLK CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC Signed-off-by: Tom Rini <[email protected]>
2022-12-22Convert CONFIG_HSMMC2_8BIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_HSMMC2_8BIT Signed-off-by: Tom Rini <[email protected]>
2022-12-21usb: Update USB_STORAGE dependenciesTom Rini
As it's no longer possible to have !DM_USB set, we can remove these dependencies. Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-21Merge tag 'v2023.01-rc4' into nextTom Rini
Prepare v2023.01-rc4 Signed-off-by: Tom Rini <[email protected]>
2022-12-19Merge tag 'u-boot-rockchip-20221219' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;
2022-12-19phy: rockchip: handle clock without enable functionJohn Keeping
If a clock doesn't supply the enable hook, clk_enable() will return -ENOSYS. In this case the clock is always enabled so there is no error and the phy initialisation should continue. Signed-off-by: John Keeping <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-19rockchip: rk3128-cru: sync the clock dt-binding header from LinuxJohan Jonker
In order to update the DT for rk3128 sync the clock dt-binding header. This is the state as of v6.0 in Linux. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2022-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
This cleans up each board's defconfig, and fixes the serial console on some Olimex board. Also we lose another legacy config variable. The rest are minor cleanups, that actually shouldn't change anything in the build. Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano, and BananaPi M1.
2022-12-13pinctrl: sunxi: Add P2WI and RSB pinmuxesSamuel Holland
P2WI and RSB are used to communicate with a PMIC. Most SoCs have only one possible pinmux. F1C100s has two possibilities, with different mux values, so omit it until some board needs one of them. Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Andre Przywara <[email protected]>
2022-12-13Revert "cmd: pxe_utils: Check fdtcontroladdr in label_boot"Tom Rini
With the change here, all extlinux.conf files with only "KERNEL /fitImage" don't work anymore. One common example of this would be those files generated by thee Poky/OE WIC bootimg-partition bootloader partition generator. This reverts commit d5ba6188dfbf6bb68354bec86e483623f1f6dae2. Reported-by: Neil Armstrong <[email protected]> Reported-by: Quentin Schulz <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-12-12configs: remove support of MTDIDS_DEFAULT/MTDPARTS_DEFAULTPatrick Delaunay
Complete the migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT in Kconfig; this patch removes the support of MTDIDS_DEFAULT / MTDPARTS_DEFAULT in the configuration files (include/configs/*.h). Signed-off-by: Patrick Delaunay <[email protected]>
2022-12-12drivers: pci: pcie_dw_common: add upper-limit to iATUBen Dooks
The 4.6 spec added an upper 32bits to the ATU limit, and since this driver is already assuming the unrolled feature added in the 4.8 specification this really should be set. This is causing a bug with testing against the QEMU model as it defaults the viewports to fully open and not setting this causes the config viewport to become most of memory (obviously stopping the emulated system working correctly) Signed-off-by: Ben Dooks <[email protected]>
2022-12-12dm: pmic: ignore disabled node in pmic_bind_childrenPatrick Delaunay
Ignore the disabled children node in pmic_bind_children() so the disabled regulators in device tree are not registered. This patch is based on the dm_scan_fdt_node() code - only the activated nodes are bound - and it solves possible issue when a deactivated regulator is bound, error for duplicated regulator name for example. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-12-12phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supplyPatrick Delaunay
Use regulator_set_enable_if_allowed() api instead of regulator_set_enable() while disabling vbus supply. This way the driver doesn't see an error when it disable an always-on regulator for VBUS. This patch is needed for STM32MP157C-DK2 board when the regulator v3v3: buck4 used as the phy vbus supply in kernel device tree is always on with the next hack for low power use-case: &usbphyc_port0 { ... /* * Hack to keep hub active until all connected devices are suspended * otherwise the hub will be powered off as soon as the v3v3 is disabled * and it can disturb connected devices. */ connector { compatible = "usb-a-connector"; vbus-supply = <&v3v3>; }; }; Without this patch and the previous update in DT the command "usb stop" failed and the next command "usb start" cause a crash. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2022-12-10mtd: nand: mxs_nand_spl: don't read useless pagesDario Binacchi
The patch prevents pages beyond the last from being unnecessarily read. This occurs when the last page to be read is not the last page of the last block. Before this change we would have read all the pages up to the end of the last block. Suggested-by: Michael Trimarchi <[email protected]> Co-developed-by: Michael Trimarchi <[email protected]> Signed-off-by: Michael Trimarchi <[email protected]> Signed-off-by: Dario Binacchi <[email protected]> Acked-by: Michael Trimarchi <[email protected]> Link: https://lore.kernel.org/all/[email protected]
2022-12-10mtd: nand: drop EXPORT_SYMBOL_GPL for nanddev_erase()Dario Binacchi
This function is only used within this module, so it is no longer necessary to use EXPORT_SYMBOL_GPL(). This patch parallels the work done in the following patch: https://lore.kernel.org/linux-mtd/[email protected] Signed-off-by: Dario Binacchi <[email protected]> Reviewed-By: Michael Trimarchi <[email protected]> Link: https://lore.kernel.org/all/[email protected]
2022-12-10mtd: nand: make Samsung SLC NAND usable againMichael Trimarchi
Upstream linux commit 69fc01296c9281 commit a1286a1fc416 ("mtd: nand: Move Samsung specific init/detection logic in nand_samsung.c") introduced a regression for Samsung SLC NAND chips. Prior to this commit chip->bits_per_cell was initialized by calling nand_get_bits_per_cell() before using nand_is_slc(). With the offending commit this call is skipped, leaving chip->bits_per_cell cleared to zero when the manufacturer specific '.detect' function calls nand_is_slc() which in turn interprets bits_per_cell != 1 as indication for an MLC chip. The effect is that e.g. a K9F1G08U0F NAND chip is falsely detected as MLC NAND with 4KiB page size rather than SLC with 2KiB page size. Add a call to nand_get_bits_per_cell() before calling the .detect hook function in nand_manufacturer_detect(), so that the nand_is_slc() calls in the manufacturer specific code will return correct results. Reported-by: Marcin Gołaś <[email protected]> Signed-off-by: Michael Trimarchi <[email protected]> Reviewed-by: Dario Binacchi <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Dario Binacchi <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-31 03:07:26 +0000