summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-14xen: Port Xen event channel driver from mini-osOleksandr Andrushchenko
Make required updates to run on u-boot. Strip functionality not needed by U-boot. Signed-off-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Anastasiia Lukianenko <[email protected]>
2020-08-14xen: Port Xen hypervisor related code from mini-osOleksandr Andrushchenko
Port hypervisor related code from Mini-OS. This is referencing the code of Mini-OS from [1] by Huang Shijie and Volodymyr Babchuk which is for ARM64. Update essential arch code to support required bit operations, memory barriers etc. Copyright for the bits ported belong to at least the following authors, please see related files for details: Copyright (c) 2002-2003, K A Fraser Copyright (c) 2005, Grzegorz Milos, [email protected],Intel Research Cambridge Copyright (c) 2014, Karim Allah Ahmed <[email protected]> [1] - https://github.com/zyzii/mini-os.git Signed-off-by: Oleksandr Andrushchenko <[email protected]> Signed-off-by: Anastasiia Lukianenko <[email protected]> [trini: Drop wmb() from musb-net/linux-compat.h now] Signed-off-by: Tom Rini <[email protected]>
2020-08-14drivers: pcie: add Broadcom IPROC PCIe RC driverSrinath Mannam
Add support for IPROC PAXC PCIe RC driver. Signed-off-by: Srinath Mannam <[email protected]> Signed-off-by: Rayagonda Kokatanur <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-14drivers: pci: add api to get dma regionsRayagonda Kokatanur
Add api to get dma regions. Signed-off-by: Rayagonda Kokatanur <[email protected]>
2020-08-13Merge tag 'u-boot-stm32-20200813' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Use IS_ENABLED to prevent ifdef in board_key_check for STM32MP - Add STM32 FMC2 EBI controller driver - Fix dwc3-sti-glue which allows STiH410-B2260 to boot again - Add fitImage its entry for 587-200 DHCOR SoM - Add both PDK2 and DRC02 DT into DHCOM fitImage its - Fix DHCOM KS8851 ethernet MAC address - Remove stm32mp1 board.c file - Use const for struct node_info in board stm32mp1.c file
2020-08-13mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driverChristophe Kerello
The driver adds the support for the STMicroelectronics FMC2 EBI controller found on STM32MP SOCs. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13mtd: rawnand: stm32_fmc2: use clrsetbits_le32Christophe Kerello
This patch uses clrsetbits_le32 function instead of multiple instructions. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macrosChristophe Kerello
This patch removes custom macros and uses FIELD_PREP and FIELD_GET macros. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where ↵Christophe Kerello
relevant This patch renames functions and local variables. This cleanup is done to get all functions starting by stm32_fmc2_nfc in the FMC2 raw NAND driver when all functions will start by stm32_fmc2_ebi in the FMC2 EBI driver. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeoutsChristophe Kerello
FMC2_TIMEOUT_5S will be used each time that we need to wait. It was seen, during stress tests in an overloaded system, that we could be close to 1 second, even if we never met this value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13mtd: rawnand: stm32_fmc2: remove useless inline commentsChristophe Kerello
Remove inline comments that are useless since function label are self explanatory. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello
The chip select defined in the device tree could only be 0 or 1. Signed-off-by: Christophe Kerello <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-08-13usb: host: dwc3-sti-glue: Fix ofnode_valid() parameterPatrice Chotard
node varaible is used as iterator into ofnode_for_each_subnode() loop, when exiting of it, node is no more a valid ofnode. Use dwc3_node instead as parameter of ofnode_valid() Fixes: ac28e59a574d ("usb: Migrate to support live DT for some driver") Signed-off-by: Patrice Chotard <[email protected]> Cc: Kever Yang <[email protected]>
2020-08-11soc: soc_ti_k3: Add device identification for J7200 SoCKishon Vijay Abraham I
Add device identification for J7200 SoC Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Lokesh Vutla <[email protected]> Reviewed-by: Suman Anna <[email protected]>
2020-08-11ram: k3-j721e: Relax version checks for memory controllerLokesh Vutla
k3-j721e ddr driver sanity checks for product id and version number. Version number gets changed for every minor update in the IP. So discard the version check and just sanity check for product id. Signed-off-by: Lokesh Vutla <[email protected]>
2020-08-11mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded valueFaiz Abbas
The hardcoded array size leads to array overflows with changes in speed modes enum in mmc core. Use MMC_MODES_END for otap_del_sel array declaration to fix this. Signed-off-by: Faiz Abbas <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2020-08-11watchdog: Add support for K3 RTI watchdogJan Kiszka
This is based on the Linux kernel driver for the RTI watchdog. To actually reset the system on an AM65x, it requires firmware running on the R5 that accepts the NMI and issues the actual system reset via TISCI. Kind of an iTCO, except that this watchdog hardware has support for no-way-out, and only for that. On the J721E, reset works without extra firmware help when routing the RTI interrupt via the ESM. Signed-off-by: Jan Kiszka <[email protected]>
2020-08-07led: led_cortina: Add CAxxx LED supportJway Lin
Add Cortina Access LED controller support for CAxxxx SOCs Signed-off-by: Jway Lin <[email protected]> Signed-off-by: Alex Nemirovsky <[email protected]> CC: Simon Glass <[email protected]> Add head file fixed link error and remove unused flashing function Reviewed-by: Simon Glass <[email protected]>
2020-08-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- XHCI updates to support MIPS better
2020-08-06blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOCOvidiu Panait
Extend manual relocation of block_cache list pointers to all platforms that enable CONFIG_NEEDS_MANUAL_RELOC. Remove m68k-specific checks and provide a single implementation that adds gd->reloc_off to the pre-relocation pointers. Acked-by: Angelo Dureghello <[email protected]> Tested-by: Angelo Dureghello <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Eric Nelson <[email protected]> Signed-off-by: Ovidiu Panait <[email protected]> [trini: Add guard around DECLARE_GLOBAL_DATA_PTR to avoid size growth] Signed-off-by: Tom Rini <[email protected]>
2020-08-06drivers: serial: Make serial_initialize return intOvidiu Panait
serial_initialize is called only during the common init sequence, after relocation (in common/board_r.c). Because it has a void return value, it has to wrapped in initr_serial. In order to be able to get rid of this indirection, make serial_initialize return int. Remove extern from prototype in order to silence the following checkpatch warning: check: extern prototypes should be avoided in .h files Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ovidiu Panait <[email protected]>
2020-08-06dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probeOvidiu Panait
Use IS_ENABLED() instead of #ifdef in blk_post_probe function. No functional change intended. Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Ovidiu Panait <[email protected]> [trini: Fix thinko and use CONFIG_HAVE_BLOCK_DEVICE in IS_ENABLED()] Signed-off-by: Tom Rini <[email protected]>
2020-08-05usb: xhci: Add virt_to_phys() to support mapped platformsStefan Roese
Some platforms, like MIPS Octeon, use mapped addresses (virtual address != physical address). On these platforms we need to make sure, that the local virtual addresses are converted to physical (DMA) addresses for the xHCI controller. This patch adds the missing virt_to_phys() calls, so that the correct addresses are used. Signed-off-by: Stefan Roese <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> Cc: Bin Meng <[email protected]> Cc: Marek Vasut <[email protected]>
2020-08-05usb: usb-uclass.c: Drop le16_to_cpu() as values are already swappedStefan Roese
These values are already swapped to CPU endianess, so swapping them again is a bug. Let's remove the swap here instead. Signed-off-by: Stefan Roese <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> Cc: Bin Meng <[email protected]> Cc: Marek Vasut <[email protected]>
2020-08-05usb: xhci: xhci_mem_init: Use cpu_to_le64() and not xhci_writeq()Stefan Roese
xhci_writeq() makes the CPU->LE swapping only when addressing registers in the xHCI controller address range and not in the local memory (RAM). We need to use cpu_to_le64() here to ensure that the conversion is done correctly. Signed-off-by: Stefan Roese <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> Cc: Bin Meng <[email protected]> Cc: Marek Vasut <[email protected]>
2020-08-05usb: xhci: Add missing endian conversions (cpu_to_leXX / leXX_to_cpu)Stefan Roese
While trying to use the U-Boot xHCI driver on the MIPS Octeon platform, which is big endian, I noticed that the driver is missing a few endian conversion calls. This patch adds these missing endian conversion calls. Signed-off-by: Stefan Roese <[email protected]> Reviewed-by: Bin Meng <[email protected]> Tested-by: Bin Meng <[email protected]> Cc: Bin Meng <[email protected]> Cc: Marek Vasut <[email protected]>
2020-08-04pinctrl: aspeed: Fix Kconfig entry indentationMichal Simek
Fix Kconfig entry indentation for Aspeed ast2500 pin control driver. Fixes: 4f0e44e46615 ("aspeed: AST2500 Pinctrl Driver") Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-08-04net: dwc_eth_qos: add Kconfig option to select supported configurationPatrick Delaunay
Add configuration flag to select the supported dwc driver configuration: - CONFIG_DWC_ETH_QOS_TEGRA186 - CONFIG_DWC_ETH_QOS_IMX - CONFIG_DWC_ETH_QOS_STM32 See Linux driver ethernet/stmicro/stmmac and associated glue layers for other configuration examples. This patch removes the not-selected compatibles and lets the linker remove the unused functions to reduce the size of the driver. Signed-off-by: Patrick Delaunay <[email protected]>
2020-08-04psci: put psci_method in .data section if EFI_LOADER is not enabledYann Gautier
Move the variable psci_method in .data section when EFI is not activated and the psci driver safely access it before relocation. Without this patch the variable is located in .bss section and the psci probe requested before relocation corrupts the device tree (probe is requested by board_f.c::print_resetinfo()). When EFI_LOADER is activated, this variable in already located in the .data.efi_runtime section by __efi_runtime_data. Signed-off-by: Yann Gautier <[email protected]> Signed-off-by: Patrick Delaunay <[email protected]>
2020-08-04Fix corner case in bad block table handling.Doyle, Patrick
In the unlikely event that both blocks 10 and 11 are marked as bad (on a 32 bit machine), then the process of marking block 10 as bad stomps on cached entry for block 11. There are (of course) other examples. Signed-off-by: Patrick Doyle <[email protected]> Reviewed-by: Richard Weinberger <[email protected]>
2020-08-04Merge tag 'u-boot-imx-20200804' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2020.10 ----------- - fixes for Toradex board - fix warnings from previous PR - HAB: reset instead of panic after failure - new board: MYiR Tech MYS-6ULX - mx6cuboxi: use OF_PLATDATA - further changes for DM Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/714513163
2020-08-04Merge tag 'fixes-for-2020.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - Fix tbs2910 vidconsole environment - Fix ipuv3 framebuffer output on i.MX6Q/D
2020-08-04Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- add DM based reset driver for SiFive SoC's.
2020-08-04Merge tag 'mips-pull-2020-08-03' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - doc: fix qemu-mips build instructions - MIPS: add GPIO, CLK and SPI drivers for Octeon MIPS64
2020-08-03net: Drop duplicate include of dm.h in pcnet.cSimon Glass
This file includes the header twice. Drop the second one. Signed-off-by: Simon Glass <[email protected]>
2020-08-03clk: Drop dm.h header file in clk-provider.hSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration and un-inlining of dev_get_clk_ptr() instead. Fix up the kendryte header files to avoid build errors. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Sean Anderson <[email protected]>
2020-08-03usb: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also move the inline function out into a C file. We should not include C code in headers. Signed-off-by: Simon Glass <[email protected]>
2020-08-03ufs: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Also drop asm/io.h Signed-off-by: Simon Glass <[email protected]>
2020-08-03nand: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <[email protected]>
2020-08-03adc: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Drop the common.h inclusion also. Signed-off-by: Simon Glass <[email protected]>
2020-08-03pci: Drop dm.h inclusion from header fileSimon Glass
The layerscape header should not include dm.h so remove it. Signed-off-by: Simon Glass <[email protected]>
2020-08-03ti: am654: Drop duplicate dm.h inclusionSimon Glass
We only need to include this header once. Drop the duplicate. Signed-off-by: Simon Glass <[email protected]>
2020-08-03spi: Drop duplicate dm.h inclusionSimon Glass
We only need to include this header once. Drop the duplicate. Signed-off-by: Simon Glass <[email protected]>
2020-08-03mmc: Drop duplicate dm.h inclusionSimon Glass
We only need to include this header once. Drop the duplicate. Signed-off-by: Simon Glass <[email protected]>
2020-08-03power: Tidy up inclusion of regulator_common.hSimon Glass
This file should not include common.h and dm.h so remove them. Also move the inclusion of this file to after the normal includes. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2020-08-03fs: fs-loader: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <[email protected]>
2020-08-03mtd: spi-mem: Drop dm.h header fileSimon Glass
This header file should not be included in other header files. Remove it and use a forward declaration instead. Signed-off-by: Simon Glass <[email protected]>
2020-08-03mtd: spi-nor: Tidy up error handling / debug codeSimon Glass
The -ENODEV error value in spi_nor_read_id() is incorrect since there clearly is a device - it just cannot be supported. Use -ENOMEDIUM instead which has the virtue of being less common. Fix the return value in spi_nor_scan(). Also there are a few printf() statements which should be debug() since they bloat the code with unused strings at present. Fix those while here. Signed-off-by: Simon Glass <[email protected]>
2020-08-03spi: Allow separate control of SPI_FLASH_TINY for SPL/TPLSimon Glass
In some cases SPL needs to be able to erase but TPL just needs to read. Allow these to have separate settings for SPI_FLASH_TINY. Signed-off-by: Simon Glass <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-18 18:59:42 +0000