summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-08mpc83xx_clk: always treat MPC83XX_CLK_PCI as invalidRasmus Villemoes
The current mpc83xx_clk driver is broken for any board for which mpc83xx_has_pci() is true, i.e. anything not MPC8308: When is_clk_valid() reports that MPC83XX_CLK_PCI is valid, init_all_clks() proceeds to call init_single_clk(), but that doesn't know about either MPC83XX_CLK_PCI or has any handling of the TYPE_SCCR_ONOFF mode correctly returned by retrieve_mode(). Hence init_single_clk() ends up returning -EINVAL, and the whole board hangs in serial_init(). The quickest fix is to simply pretend that clock is invalid for all, since nobody can have been relying on it. Adding proper support seems to be a bit more involved than just handling TYPE_SCCR_ONOFF: - The power-on-reset value of SCCR[PCICM] is 0, so mpc83xx_clk_enable() would probably need to be tought to enable the clock. - The frequency of PCI_SYNC_OUT is either SYS_CLK_IN or SYS_CLK_IN/2 depending on the CFG_CLKIN_DIV configuration input, but that can't be read from software, so to properly fill out ->speed[MPC83XX_CLK_PCI] I think one would need guidance from Kconfig or dtb. Partially fixes: 07d538d281 clk: Add MPC83xx clock driver Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Mario Six <[email protected]>
2020-01-07dm: Add a debug message when devices are skipped pre-relocSean Anderson
This adds a message to lists_bind_fdt when it skips initializing a device pre-relocation. I've had a couple errors where a device didn't initialize properly because one of its dependencies was missing. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2020-01-07dm: devres: Add a new OFDATA phaseSimon Glass
Since the ofdata_to_platdata() method can allocate resources, add it as a new devres phase. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: devres: Use an enum for the allocation phaseSimon Glass
At present we only support two phases where devres can be used: bind and probe. This is handled with a boolean. We want to add a new phase (platdata), so change this to an enum. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: devres: Add testsSimon Glass
The devres functionality has very few users in U-Boot, but it still should have tests. Add a few basic tests of the main functions. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: devres: Convert to use loggingSimon Glass
At present when CONFIG_DEBUG_DEVRES is enabled, U-Boot prints log messages to the console with every devres allocation/free event. This causes most tests to fail since the console output is not as expected. In particular this prevents us from adding a device to sandbox which uses devres in its bind method. Move devres over to use U-Boot's logging feature instead, and add a new category for devres. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: core: Add a new flag to track platform dataSimon Glass
We want to avoid allocating platform data twice. This could happen if device_probe() is called after device_ofdata_to_platdata() for the same device. Add a flag to track whether device_ofdata_to_platdata() has been called on a device. Check the flag to make sure it doesn't happen twice, and clear the flag when the data is freed. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: core: Export a new function to read platdataSimon Glass
Add a new internal function, device_ofdata_to_platdata() to handle allocating private space associated with each device and reading the platform data from the device tree. Call this new function from device_probe(). Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: core: Allocate parent data separate from probing parentSimon Glass
At present the parent is probed before the child's ofdata_to_platdata() method is called. Adjust the logic slightly so that probing parents is not done until afterwards. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: core: Move ofdata_to_platdata() call earlierSimon Glass
This method is supposed to extract platform data from the device tree. It should be done before the device itself is probed. Move it earlier in the device_probe() function. Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: core: Don't clear active flag twice when probe() failsSimon Glass
Remove this duplicated code, since the 'fail' label does this immediately. Signed-off-by: Simon Glass <[email protected]>
2020-01-07aspeed: ast2500: Read clock ofdata in the correct methodSimon Glass
At present the clock driver reads its ofdata in the probe() method. This is not correct although it is often harmless. However in this case it causes a problem, something like this: - ast_get_scu() is called (from somewhere) to get the SCI address - this probes the clock - first sets up ofdata (which does nothing at present) - DM marks clock device as active - DM calls pinctrl - pinctrl probes and calls ast_get_scu() in ast2500_pinctrl_probe() - ast_get_scu() probes the clock, but sees it already marked as probed - ast_get_scu() accesses the clock's private data, with scu as NULL - DM calls clock probe function ast2500_clk_probe() which reads scu By putting the read of scu into the correct method, scu is read as part of ofdata setup, and everything is OK. Note: This problem did not matter until now since DM always probed all parents before reading a child's ofdata. The fact that pinctrl is a child of clock seems to trigger this strange bug. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]>
2020-01-07pci: Print a warning if the bus is accessed before probingSimon Glass
It is not possible to access a device on a PCI bus that has not yet been probed, since the bus number is not known. Add a warning to catch this error. Signed-off-by: Simon Glass <[email protected]>
2020-01-07usb: Drop use of BUG_ON() and WARN_ON()Simon Glass
These macros use __FILE__ which inserts the full path of the object file into U-Boot, thus increasing file size. Drop these usages. An older version of this patch was submitted here: http://patchwork.ozlabs.org/patch/1205784/ Signed-off-by: Simon Glass <[email protected]>
2020-01-07dm: core: Use assert_noisy() in devresSimon Glass
Use this macros instead of the linux ones, as the output is smaller. Signed-off-by: Simon Glass <[email protected]>
2020-01-07virtio: rng: Add a random number generator(rng) driverSughosh Ganu
Add a driver for the virtio-rng device on the qemu platform. The device uses pci as a transport medium. The driver can be enabled with the following configs CONFIG_VIRTIO CONFIG_DM_RNG CONFIG_VIRTIO_PCI CONFIG_VIRTIO_RNG Signed-off-by: Sughosh Ganu <[email protected]>
2020-01-07sandbox: rng: Add a random number generator(rng) driverSughosh Ganu
Add a sandbox driver for random number generation. Mostly aimed at providing a unit test for rng uclass. Signed-off-by: Sughosh Ganu <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-01-07stm32mp1: rng: Add a driver for random number generator(rng) deviceSughosh Ganu
Add a driver for the rng device found on stm32mp1 platforms. The driver provides a routine for reading the random number seed from the hardware device. Signed-off-by: Sughosh Ganu <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Acked-by: Patrick Delaunay <[email protected]> Remove a superfluous blank line Signed-off-by: Heinrich Schuchardt <[email protected]>
2020-01-07clk: stm32mp1: Add a clock entry for RNG1 deviceSughosh Ganu
Add an entry for allowing clock enablement for the random number generator peripheral, RNG1. Signed-off-by: Sughosh Ganu <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Acked-by: Patrick Delaunay <[email protected]>
2020-01-07dm: rng: Add random number generator(rng) uclassSughosh Ganu
Add a uclass for reading a random number seed from a random number generator device. Signed-off-by: Sughosh Ganu <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-01-07power: regulator: support off-on-delay-usPeng Fan
off-on-delay-us has been supported by Linux, so let's use it. Signed-off-by: Peng Fan <[email protected]>
2020-01-07remoteproc: stm32: load resource table from firmwareFabien Dessenne
Load the optional resource table from the firmware, and write its address in the dedicated backup register. Signed-off-by: Fabien Dessenne <[email protected]> Acked-by: Patrick Delaunay <[email protected]>
2020-01-07remoteproc: stm32: track the coprocessor state in a backup registerFabien Dessenne
Update the dedicated backup register to track the coprocessor state and rely on that register to compute the .is_running() value (which expects a return value of 0 -not 1- if the processor is running). Signed-off-by: Fabien Dessenne <[email protected]> Acked-by: Patrick Delaunay <[email protected]>
2020-01-07remoteproc: elf_loader: Add elf resource table load supportFabien Dessenne
Add rproc_elf_load_rsc_table(), which searches for a resource table in an elf64/elf32 image, and if found, copies it to device memory. Add also the elf32 and elf64 variants of this API. Add a test for this. Signed-off-by: Fabien Dessenne <[email protected]> Acked-by: Patrick Delaunay <[email protected]> Reviewed-by: Lokesh Vutla <[email protected]>
2020-01-07drivers: board: Add get_fit_loadable()Jean-Jacques Hiblot
This function will be used by the SPL to get the names of images to load from the FIT. This allows to load different images based on runtime HW detection. Signed-off-by: Jean-Jacques Hiblot <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-01-07drivers: board: Make the board drivers available in SPLJean-Jacques Hiblot
Make the board driver available in the SPL too. The board driver is a way to provide useful information about the board and that can be useful in the SPL too. Signed-off-by: Jean-Jacques Hiblot <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-01-07Merge tag 'u-boot-imx-20200107' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx New for 2020.04 --------------- - New boards Embedded Artists COM board Xea Board - Switch to DM: Aristainetos boards Toradex colibri (DM_ETH) iCubox GE bx50v3 mx7dsabre (DM_ETH) cx9020 - New features: Bootaux with elf files Default SYS_THUMB_BUILD for i.MX6/7 - Fixes: DHCOM i.MX6 PDK Engicam i.MX8M tools (imx8m_image) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07Merge tag 'u-boot-atmel-2020.04-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2020.04 cycle This feature set is a patch series from Tudor Ambarus which includes parsing of the spi flash SFDP parser for SST flashes, and using those tables to retrieve unique saved per device MAC address. This is then used as base mac address on the SAMA5D2 Wireless SOM EK board.
2020-01-07ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC AccessThor Thayer
The ECC registers in the SDRAM HMC Adapter should always be accessible (both when ECC is enabled and disabled). Currently, the registers are accessible only when ECC is enabled. The ECC Enabled bit is used to determine the status of ECC by later OSes so always allow access. Signed-off-by: Thor Thayer <[email protected]> Reviewed-by: Ley Foon Tan <[email protected]>
2020-01-07arm: socfpga: stratix10: Enable SMMU accessThor Thayer
Enable TCU access through the Stratix10 CCU so that the SMMU can access the SDRAM. Signed-off-by: Thor Thayer <[email protected]> Reviewed-by: Ley Foon Tan <[email protected]>
2020-01-07ddr: altera: agilex: Add SDRAM driver for AgilexLey Foon Tan
Add SDRAM driver for Agilex SoC. Signed-off-by: Tien Fong Chee <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07ddr: altera: Restructure Stratix 10 SDRAM driverLey Foon Tan
Restructure Stratix 10 SDRAM driver. Move common code to separate file, in preparation to support SDRAM driver for Agilex. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07cache: Add Arteris Ncore cache coherent unit driverLey Foon Tan
Add Cache Coherency Unit (CCU) driver. CCU is to ensures consistency of shared data between multi masters in the system. Driver initializes CCU's directories and coherency agent interfaces in CCU IP. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07clk: agilex: Add clock driver for AgilexLey Foon Tan
Add clock manager driver for Agilex. Provides clock initialization and get_rate functions. agilex-clock.h is from Linux commit ID cd2e1ad12247. Signed-off-by: Chee Hong Ang <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07arm: socfpga: Move Stratix10 and Agilex system manager common codeLey Foon Tan
Move Stratix10 and Agilex system manager common code to system_manager_soc64.h. Changed macros to use SYSMGR_SOC64_*. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07arm: socfpga: Move firewall code to firewall fileLey Foon Tan
Move firewall related code to new firewall.c, to share code in Stratix 10 and Agilex. SDMMC will transfer data to OCRAM in SPL. So, enable privilege for SDMMC to allow DMA transfer to OCRAM. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07arm: socfpga: Convert clock manager from struct to definesLey Foon Tan
Convert clock manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get clock manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07arm: socfpga: Convert system manager from struct to definesLey Foon Tan
Convert system manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get system manager base address from DT node instead of using #define. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07arm: socfpga: Convert reset manager from struct to definesLey Foon Tan
Convert reset manager for Gen5, Arria 10 and Stratix 10 from struct to defines. Change to get reset manager base address from DT node instead of using #define. spl_early_init() initializes the DT setup. So, move spl_early_init() to beginning of function and before get base address from DT. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07spl: Allow cache drivers to be used in SPLLey Foon Tan
Add an option for building cache drivers in SPL. Signed-off-by: Ley Foon Tan <[email protected]> Reviewed-by: Tom Rini <[email protected]> Reviewed-by: Simon Goldschmidt <[email protected]>
2020-01-07dfu: Add optional timeout parameterAndy Shevchenko
When the `dfu` command is called from the U-Boot environment, it now accepts an optional parameter that specifies a timeout (in seconds). If a DFU connection is not made within that time the `dfu` command exits (as it would if Ctrl+C was pressed). If the timeout is left empty or being zero the `dfu` command behaves as it does now. This is useful for allowing U-Boot to check to see if anything wants to upload new firmware before continuing to boot. The patch is based on the commit https://github.com/01org/edison-u-boot/commit/5e966ccc3c65c18c9783741fa04e0c45e021780c by Sebastien Colleur, which has been heavily reworked due to U-Boot changes in the past. Signed-off-by: Brad Campbell <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2020-01-07video: meson: Drop unnecessary header includesSimon Glass
These files should not be included in meson header files. Drop them and tidy up the affected C files. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Anatolij Gustschin <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]>
2020-01-07ddr: imx8m: Return error values from LPDDR4 trainingFrieder Schrempf
In cases when the same SPL should run on boards with i.MX8MM, that differ in DDR configuration, it is necessary to try different parameters and check if the training done by the firmware suceeds or not. Therefore we return the DDR training/initialization success to the upper layer in order to be able to retry with different settings if necessary. Signed-off-by: Frieder Schrempf <[email protected]>
2020-01-07pci: imx: Add iMX6SX compatibleMarek Vasut
The driver works fine with iMX6SX, add the missing compatible string. Signed-off-by: Marek Vasut <[email protected]> Cc: Bin Meng <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Stefano Babic <[email protected]>
2020-01-07video: lg4573: convert to DMHeiko Schocher
convert this driver to support DM. Signed-off-by: Heiko Schocher <[email protected]>
2020-01-06Merge branch 'next'Tom Rini
Bring in the following merges: commit 8fbbec12f7d2c18f8883f3371cfca74a98b5dd87 Merge: 87f69f467a83 63618e71e89b Author: Tom Rini <[email protected]> Date: Fri Jan 3 09:48:47 2020 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next - updates and fixes on ls1028a, lx2, ls1046a, MC-DPSPARSER support commit 87f69f467a8335b171c71bf217d2625d515acd7c Merge: c0912f9bbfb2 4466b9970319 Author: Tom Rini <[email protected]> Date: Tue Dec 24 08:18:19 2019 -0500 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xx into next - Enable DM driver on ppc/km boards - Enable DM_USB for some of NXP powerpc platforms: P5040, T4240, T208x, T104x, P4080, P2041, P2020, P1020, P3041 - Some updates in mpc85xx-ddr driver, km boards commit c0912f9bbfb26dd03d189953678691b799d35b6e Merge: 533c9f5714bd a1d6dc3f8407 Author: Tom Rini <[email protected]> Date: Wed Dec 18 07:20:19 2019 -0500 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next - Various x86 common codes updated for TPL/SPL - I2C designware driver updated for PCI - ICH SPI driver updated to support Apollo Lake - Add Intel FSP2 base support - Intel Apollo Lake platform specific drivers support - Add a new board Google Chromebook Coral commit 533c9f5714bdba79dc6f2629284d4c1a08a611d1 Merge: 553cb0688782 033e18b47bd0 Author: Tom Rini <[email protected]> Date: Tue Dec 17 07:53:08 2019 -0500 Merge tag '20191217-for-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next i2c: for next - misc: i2c_eeprom: Add partition support and add ability to query size of eeprom device and partitions - i2c common: add support for offset overflow in to address and add sandbox tests for it. commit 553cb06887825314e74a9bdac337467c77d1db88 Merge: f39abbbc531e b4f98b3b16ec Author: Tom Rini <[email protected]> Date: Thu Dec 12 08:18:59 2019 -0500 Merge tag 'dm-next-13dec19' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm into next buildman improvements including toolchain environment feature sandbox unicode support in serial
2020-01-04Revert "mmc: davinci: drop struct davinci_mmc_plat"Tom Rini
Adam Ford reports that this change breaks booting on da850-evm and Bartosz Golaszewski agrees that with the impending release we should revert the change for now. With that noted: This reverts commit 21a4d80a710c79053ac1deaa65ff9b69e6c031d4. Cc: Bartosz Golaszewski <[email protected]> Tested-by: Adam Ford <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2020-01-02video: add wrappers for ttf type files to .gitignoreDario Binacchi
The scripts/Makefile.lib generates an assembler file (*.S) to wrap the font data for each file of type ttf defined in Kconfig. Signed-off-by: Dario Binacchi <[email protected]>
2020-01-02video: Avoid using #ifdef in video-uclass.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use IS_ENABLED(), etc., instead. Signed-off-by: Simon Glass <[email protected]>
2020-01-02video: Avoid using #ifdef in vidconsole-uclass.cSimon Glass
This code does not really need to use #ifdef. We can use if() instead and gain build coverage without impacting code size. Change the #ifdefs to use CONFIG_IS_ENABLED() instead. Signed-off-by: Simon Glass <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-21 22:28:34 +0000