| Age | Commit message (Collapse) | Author |
|---|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon into next
This PR introduces 3 new platforms, two from the new Dragonwing IQx
series (QCS615 and QCS8300) as well as the IPQ5424.
Additionally:
* Support for booting downstream Android boot images on some phones is
added
* Capsule update support is expanded to be more generic, determining
which partition U-Boot was flashed to automatically and supporting
many more boards.
* Minor capsule update bugs are fixed
* A watchdog driver is added and gets timeout support
* Autoboot now requires pressing "space" specifically to stop booting as
a workaround for some boards getting rogue key presses which would
cause autoboot to fail
* Documentation is added for the Dragonwing boards
* The RB1/2 now use USB gadget mode rather than host
* A bug is fixed where GPIO reads could return incorrect values
|
|
Update the variable name to sm8250_gcc_data as it's in the sm8250
driver.
Fixes: dcd688229cb ("clk/qcom: add driver for sm8250 GCC")
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Update the variable name to sc7280_gcc_data as it's in the sc7280
driver.
Fixes: f50e7be6bb1 ("clk/qcom: add initial clock driver for sc7280")
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Calling scsi_scan() results in all the block devices (and EFI block
devices) being destroyed and re-created. This breaks the EFI filesystem
drivers during capsule update.
Remove the call, since boards really should be calling scsi_scan()
themselves during board_init().
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
Link: https://lore.kernel.org/r/20250411-b4-qcom-capsule-update-improvements-v2-3-27f6b2fcc4a9@linaro.org
Signed-off-by: Casey Connolly <[email protected]>
|
|
Port Linux's gcc-qcs615.c driver to U-Boot for basic bring-up.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Aswin Murugan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Enable QMP phy for QCS615, referenced from Linux.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Aswin Murugan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Enable QMP phy for QCS8300, referenced from Linux.
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Balaji Selvanathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
* Port Linux's gcc-qcs8300.c driver to U-Boot for basic bring-up.
* Enable QCS8300 clocks in qcom_defconfig.
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Balaji Selvanathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
In the current implementation, the GPIO read operation considers
both the input and outbut bits (bits 0 and 1). It should only consider
the state of input bit, i.e bit 0. To address this, mask input bit
alone and read it.
Signed-off-by: Aswin Murugan <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Prepare v2025.07-rc5
With this merge, tighten up the LTO_FLAGS removal we added to not
trigger on ARMv7 (which is Thumb-2 and should be fine).
|
|
This patch enhances the Qualcomm watchdog driver by introducing
support for dynamic timeout configuration. Specifically:
- Calculates and sets the bark and bite timeout values based on
the clock rate and the requested timeout in milliseconds.
- Adds retrieval of the watchdog clock rate during probe using
the common clock framework.
- Adds a default timeout value for ARCH_SNAPDRAGON
in WATCHDOG_TIMEOUT_MSECS.
These changes improve the configurability and accuracy of the
watchdog timer on Qualcomm platforms.
This work builds upon the previous submission:
https://lore.kernel.org/all/[email protected]/
Signed-off-by: Balaji Selvanathan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Some Qualcomm device vendors decide to turn the watchdog on in the
bootloader, resulting in the device being reset if it isn't petted every
~30 seconds. Introduce a driver to keep the watchdog happy and prevent this
annoying behaviour.
Signed-off-by: Paul Sajna <[email protected]>
Co-authored-by: Paul Sajna <[email protected]>
Tested-by: Paul Sajna <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add pinctrl driver for the TLMM block found in the ipq5424 SoC.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Add initial set of clocks and resets for enabling U-Boot on ipq5424
based RDP platforms.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Reviewed-by: Casey Connolly <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Device bus address might not be valid for direct access when the bus
address and CPU address are not the same. Use dev_bus_to_phys() to
translate bus address back to CPU address.
Fixes: 3d98b8c504e15 ("net: designware: Invalidate RX buffer cache before freeing the DMA descriptor")
Signed-off-by: Baruch Siach <[email protected]>
Reviewed-by: Ramon Fried <[email protected]>
|
|
Marek Vasut <[email protected]> says:
Rename the environment related variables and add ENV_ prefix, so that
all configuration options which are related to environment would have
an CONFIG_ENV_ prefix. No functional change.
Link: https://lore.kernel.org/r/[email protected]
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2025.10 cycle:
This feature set includes the addition of new sam9x7 SoC and a new board
named sam9x7-curiosity. There is also new support for sam9x60 compatible
at91 watchdog.
|
|
into next
- Assorted cleanups and R-Car Gen4 watchdog driver
|
|
Add PMC driver support for sam9x7 SoC family
Signed-off-by: Varshini Rajendran <[email protected]>
[[email protected]: Add peripheral clock id for pmecc]
Signed-off-by: Balamanikandan Gunasundar <[email protected]>
|
|
The clk_register function logs an error if parent_name is missing from the
Device Tree.On the SAM9X7, the main_rc node is omitted to stay aligned with
the Linux Device Tree.Remove the parent_name check in at91_clk_main_rc()
to allow it to pass NULL when the parent is not specified.
Signed-off-by: Manikandan Muralidharan <[email protected]>
|
|
Add support for hardware dividers for PLL IDs.In sam9x7 SoC,
PLL_ID_PLLA and PLL_ID_PLLA_DIV2 has /2 hardware dividers
each.
fcorepllack -----> HW Div = 2 -+--> fpllack
|
+--> HW Div = 2 ---> fplladiv2ck
Signed-off-by: Varshini Rajendran <[email protected]>
|
|
Add support for different core clock frequency input ranges
for different PLL IDs in the PLL driver and align sam9x60, sama7g5 SOC
platforms.
Signed-off-by: Varshini Rajendran <[email protected]>
|
|
SAM9X60 has a slightly different watchdog implementation:
- Timer value moved into a new register WLR
- Some MR register fields have their position changed
This patch add SAM9X60 support, also adds a compatible
for SAMA5D4 which is the same as existing SAM9260.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
"wdt" is a better name for watchdog rather than generic "priv".
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Use the name "mr" since we are referring to timer mode register.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
Moteen Shah <[email protected]> says:
This patch series adds the functionality to print the DM firmware
version being used. Before requesting TISCI for the DM version we
first check if the DM split mode capability exists, if yes, we proceed
onto making the call to TISCI for retrieving the version information.
DM split mode capability indicates that the DM is a separate binary
altogether and has its own versioning information similar to TIFS.
Boot Logs: https://gist.github.com/Jamm02/37864f605445944a0c0caf426e0aba50
Link: https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html#tisci-msg-query-fw-caps
Link: https://lore.kernel.org/r/[email protected]
|
|
Beleswar Padhi <[email protected]> says:
This series adds remoteproc support on MCU R5F in Split mode.
During boot, ROM can bring up the boot R5F cores in either lockstep or
split mode based on X509 certificate flags. If booted in lockstep mode,
the MCU R5F cores will run first the R5 SPL, and then once A72 comes up,
will run the Device Manager (DM) firmware. But if booted in split mode, core
0 will run DM firmware and second core sits in WFI. Shut it down so that
other firmwares can later be loaded on them.
The shutdown of MCU R5 Core 1 is invoked at A72 SPL init, as by that
time Device Manager (DM) is up and running on R5 Core 0. The shutdown
of MCU R5 Core 1 is handled by Device Manager itself.
Test logs:
https://gist.github.com/3V3RYONE/ee8e3cb9aa5f4c5c00b059b9c14bfa98
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a function to retrieve information of the DM firmware's ABI versions,
RM/PM HAL, firmware version, etc using TI_SCI protocol.
Signed-off-by: Moteen Shah <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Add a new function to query the capabilities of the DM firmware, using
TI SCI protocol to retrieve a 64-bit firmware capability, where each bit
represents a specific capability supported by the firmware.
Signed-off-by: Moteen Shah <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Introduce response and request structs to receive and request
information regarding DM version, etc from TI SCI.
Signed-off-by: Moteen Shah <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Introduce response and request structs for receiving information
regarding FW/SOC capability from DM. The received capability can
further be used to call certain API's based on the feature supoorted
by the DM firmware.
Signed-off-by: Moteen Shah <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
|
|
Acquire processor control before doing core reset operations in probe
routine. Release the control afterwards, so that it can be acquired
during core loading operations.
Signed-off-by: Beleswar Padhi <[email protected]>
Reviewed-by: Neha Malcom Francis <[email protected]>
|
|
Add support of Renesas R-Car Gen4 watchdog timer. Timeouts up to
8184.0s are supported (CKS1 register is not involved). The watchdog
uses the clock of type CLK_TYPE_GEN4_MDSEL.
The timeout is set in
dts/upstream/src/arm64/renesas/r8a779f0-spider-cpu.dtsi section &rwdt.
This driver is based on upstream linux commit:
e70140ba0d2b("Get rid of 'remove_new' relic from platform driver struct")
Signed-off-by: Shmuel Leib Melamud <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Rasmus Villemoes <[email protected]> says:
While looking through list.h, I saw that the regular list_* helpers
(and one of the hlist_* ones) still contain the prefetch() that was
removed in linux 14 years ago. It doesn't do anything, but makes the
macros harder to read, so get rid of it, and the fallback, no-op
definition that they relied on. That requires removing a few uses
outside list.h as well.
checkpatch warns about some whitespace issues in list.h, but as I've
copied whole kerneldoc+#define blocks directly from the linux kernel,
I think it's better to just accept that so that we don't introduce
needless diffs. The "macro argument reuse" arguments should also be
ignored, as e.g. the "member" arguments are obviously always just bare
identifiers, and the "pos" arguments must be assigned to multiple
times.
Link: https://lore.kernel.org/r/[email protected]
|
|
These all end up using the no-op prefetch() defined in linux/list.h,
because the only possible real implementation is in
arch/mips/include/asm/processor.h, which is behing
CONFIG_CPU_HAS_PREFETCH which is nowhere defined.
In order to be able to drop that fallback definition from list.h,
first remove all uses.
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
Add support of CLK_TYPE_GEN4_MDSEL clock type to gen3_clk_get_rate64()
function. In particular, this type of clock is used by Renesas R-Car
Gen4 watchdog. It operates similarly to CLK_TYPE_GEN3_MDSEL clock.
Signed-off-by: Shmuel Leib Melamud <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Atmel: Improve gadget disconnect stability by power cycling
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250616
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/26704
Usb gadget:
- Fix ti_musb driver in gadget mode (with DM_USB_GADGET)
DFU:
- mmc/scsi backends when using 10 or more partitions
|
|
Contrary to the datasheet, setting both DETACH and PULLD_DIS bits to 1
does not always drive the DP and DM lines to high-impedance. This
prevents the host from reliably detecting a USB disconnect and subsequent
reconnect.
The symptom is that the first gadget command (e.g., dhcp) succeeds, while
subsequent commands (e.g., nfs) fail.
Disabling and re-enabling the controller entirely, instead of toggling the
PULLD_DIS bit, reliably generates a disconnect event.
The Linux driver works correctly because gadget_disconnect/gadget_connect
are always followed by gadget_udc_start/gadget_udc_stop. In U-Boot
pullup() is used solely.
This behavior has been observed on the SAM9X60-Curiosity and
AT91SAM9G25-EK boards and has been reported to Microchip.
Signed-off-by: Zixun LI <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[mkorpershoek: reworded commit title + comment to usba_udc_pullup()]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Remove duplicate .ops assignment that was overriding the correct
ti_musb_gadget_ops with musb_usb_ops (host ops) in the ti_musb_peripheral
driver. This was causing U-Boot crashes when trying to call the
handle_interrupts operation since the wrong ops structure was being used.
Fixes: 7d98dbcc3dc ("usb: musb-new: Add support for DM_USB")
Fixes: 281eaf1ed83a ("usb: gadget: musb: Convert interrupt handling to usb_gadget_generic_ops")
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
The third_arg for a dfu alt is read as an integer and is overloaded for
different supported backends. For ext4 and fat, this third_arg
represents the partition and forms the dev part string, which should
have its partition in hex. This commit fixes dfu ext4/fat usage for
devices with ten or more partitions.
Signed-off-by: Ivan Pang <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Lukasz Majewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
6.15 + winbond"
Christian Marangi <[email protected]> says:
This small series sync linux/bitfield.h from Linux 6.15 and fix all
the compilation error due to a change in the header include.
The sync is needed to make it easier to support the winbond changes.
The changes are CI test with [1]
[1] https://github.com/u-boot/u-boot/pull/777
Link: https://lore.kernel.org/r/[email protected]
|
|
Add Winbond W25N04KV flash support that use a different value to detect
ECC bitflip.
Signed-off-by: Christian Marangi <[email protected]>
|
|
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <[email protected]>
|
|
The WARN macro requires inclusion of linux/bug.h header. It does
currently work as bitfield.h includes it indirectly but this will
change when bitfield.h will be synced with new Linux version.
Explicitly include the header to fix future compilation error.
Signed-off-by: Christian Marangi <[email protected]>
|
|
E Shattow <[email protected]> says:
Make consistent use of lowercase hexadecimal prefix '0x' throughout U-Boot.
There are a few remaining uses of uppercase 'X' to denote hexadecimal prefix
or placeholder in documentation and error messages.
External devicetree-rebasing dts/upstream and the generated code of
xilinx/zynq are ignored for the series.
Link: https://lore.kernel.org/r/[email protected]
|
|
Use consistent lowercase hex prefix style in drivers/*
Does not change hex prefix case in allcaps uppercase style error messages
Signed-off-by: E Shattow <[email protected]>
|
|
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <[email protected]>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()]
Signed-off-by: Tom Rini <[email protected]>
|
|
Sukrut Bellary <[email protected]> says:
This patch series adds the support for
1. In am33xx SoC[1], enhanced capture (eCAP) supports auxiliary PWM (APWM).
This series adds the PWM driver support for the APWM feature for eCAP on
AM33xx. AM335X_ECAP0_IN_PWM0_OUT is used to enable the backlight.
2. Fix build warning in ti-ehrpwm driver in dev_deb().
3. Enable eCAP0 PWM and LCD pin muxing to support splash screen on
AM335x EVM[2].
[1] AM335x TRM - https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
[2] AM335x EVM - https://www.ti.com/tool/TMDXEVM3358
per discussion on the earlier patch series,
https://lore.kernel.org/all/[email protected]/
dropping the device tree changes in this series due to OF_UPSTREAM
conflict.
As we are dropping the DT patch, started with the new series instead of
V2.
This series doesn't contain defconfig changes since we don't want to
enable LCD, splash screen and PWM support by default.
Enabling splash screen and PWM support in defconfig causes u-boot crash
on AM335x based beaglebone black. This will be handled in a separate
patch.
Link: https://lore.kernel.org/r/[email protected]
|
