| Age | Commit message (Collapse) | Author |
|---|
|
The existing API for these functions is different from the rest of
U-Boot, in that any error code must be obtained from the errno variable
on failure. This variable is part of the C library, so accessing it
outside of the special 'sandbox' shim-functions is not ideal.
Adjust the API to return an error code, to avoid this. Update existing
uses to check for any negative value, rather than just -1.
Signed-off-by: Simon Glass <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm.git
Back when the TPM subsystem was refactored tpm_tis_wait_init() ended up
being called after tpm_tis_init() which initializes values the former needs.
Since we added more TPM chipsets since then sitting on an i2c bus, this patch
folds in tpm_tis_wait_init into tpm_tis_init and makes sure it's called in the
right order regardless of the bus the TPM sits on.
|
|
The TXFIFO register of LPI2C only has one byte length, and if the length
of the data that needs to be read exceeds 256 bytes, it needs to be
written to TXFIFO multiple times.
Signed-off-by: Fedor Ross <[email protected]>
|
|
Instead of using the hard-coded bus speed value I2C_SPEED_STANDARD_RATE,
use the actual configured bus speed. This way the bus speed doesn't
change suddenly after calling the imx_lpi2c_probe_chip() function for
example.
Signed-off-by: Fedor Ross <[email protected]>
|
|
Fix a typo in a debug message. It should be 'for' not 'fot' .
Signed-off-by: Fedor Ross <[email protected]>
|
|
Newer Samsung SoCs (including newer Exynos, ExynosAuto, Google Tensor)
still use these IPs, or slightly newer versions of it.
Make these drivers available on these platforms by guarding
EXYNOS4/EXYNOS5 specific code behind their configs, and using CCF for
clocks on other platforms.
Tested S3C I2C driver on Exynos7885.
This along with extended clock driver should enable S3C I2C on
Exynos850.
Signed-off-by: David Virag <[email protected]>
Tested-by: Henrik Grimler <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
This has been dead code for many years now. Remove it.
Signed-off-by: David Virag <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
There is no reason to use goto and just call return. Better is to call
return directly which is done for some if/else parts.
Also make no sense to setup ret to -ETIMEDOUT and then to 0.
Return timeout directly.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
There is no reason to have any pointer to GD that's why remove it.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
What model of Radxa ZERO 3W/3E board can be identified using ADC at
runtime, add a Kconfig symbol to allow use of ADC in SPL.
This will be used to identify board model in SPL to allow loading
correct FIT configuration and FDT for U-Boot proper at SPL phase.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Port the RK3308 part of the Rockchip IO Domain driver from linux.
This differs from linux version in that vccio3 iodomain bit is enabled
in the write ops instead of in an init ops as in linux, this way we can
avoid keeping a full state of all supply that have been configured.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Hosts capable of 8-bit can also do 4 bits, fix use of 4-bit mode when
8-bit mode is supported.
This fixes use of 1-bit mode with SD NAND on ROCK Pi S using the DT in
v6.11-rc1 that chage to use 8-bit bus to also support eMMC. With this
4-bit mode is used with SD NAND and 8-bit mode with eMMC, same as in
Linux kernel.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Fix multiplex configuration for PCIe1L0 and PCIe1L1 in PCIESEL_CON for
RK3588 to correctly select between Combo PHYs and PCIe3 PHY.
Currently, the code incorrectly muxes both ports to Combo PHYs,
interfering with PCIe3 PHY settings.
Introduce PHY identifiers to identify the correct Combo PHY and set
the necessary bits accordingly.
This fix is adapted from the upstream Linux commit by Sebastian Reichel:
d16d4002fea6 ("phy: rockchip: naneng-combphy: Fix mux on rk3588")
Fixes: b37260bca1aa ("phy: rockchip: naneng-combphy: Use signal from comb PHY on RK3588")
Reviewed-by: Kever Yang <[email protected]>
Signed-off-by: Sebastian Kropatsch <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-nand-flash
This series adds support for the UBI block device, which allows to read/write
data block by block. The series was tested by Alexey Romanov on SPI NAND.
The patches pass the pipeline CI:
https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/pipelines/21933
|
|
UBI block is virtual block device, which is an abstraction
over MTD layer. Therefore it is logical to use it in combination
with MTD drivers.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
UBI partition is abstraction over UBI volumes.
Can be used by UBI block device.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
UBI block is an virtual device, that runs on top
of the MTD layer. The blocks are UBI volumes.
Intended to be used in combination with other MTD
drivers.
Despite the fact that it, like mtdblock abstraction,
it used with UCLASS_MTD, they can be used together
on the system without conflicting. For example,
using bcb command:
# Trying to load bcb via mtdblock:
$ bcb load mtd 0 mtd_partition_name
# Trying to load bcb via UBI block:
$ bcb load ubi 1 ubi_volume_name
User always must attach UBI layer (for example, using
ubi_part()) before using UBI block device.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Acked-by: Heiko Schocher <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Bind SPI-NAND driver to MTD block driver.
Reviewed-by: Frieder Schrempf <[email protected]>
Signed-off-by: Alexey Romanov <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
MTD block - abstraction over MTD subsystem, allowing
to read and write in blocks using BLK UCLASS.
Signed-off-by: Alexey Romanov <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Add new MTD partition driver, which can be useful with
mtdblock driver combination.
Signed-off-by: Alexey Romanov <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
This updates the "old style" DTs to that of Linux v6.10, matching what
OF_UPSTREAM is at now. Hopefully we won't need to do this (manually)
anymore. Since this brings in the DT for a new board (Tanix TX1), also
add the defconfig for that, which has just been waiting for that sync.
There are three more fixes: two for the SPI clock setup, which avoids
too high frequencies in some cases, and one fix to avoid a build warning
with GCC 14 for the sunxi TOC0 part of the mkimage tool.
The gitlab CI passed, and I tested the SPI flash on the OrangePi Zero 3
and also booted that into Linux.
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2024.10-rc2
amd/xilinx:
- Enable CONFIG_MMC_SPEED_MODE_SET
env:
- support overriding spi dev from board code
clk:
- Add set_rate support for display clocks
spi:
- Describe is25lp01gg flash
zynq:
- Add support for 7z010_lr and 7z020_lr
zynqmp:
- Add support for zu1eg_lr
- Enable NFS for Kria
- DT changes
- Cleanup firmware handling in board_init()
versal-net:
- Setup spi seq number based on boot device
- dt-schema update for mini configurations
versal2:
- Disable uartlite driver
- Add support for mini configurations
- Enable NFS
|
|
Add driver model support by using the uclass UCLASS_USB_GADGET_GENERIC.
Disable local usb_gadget_register_driver()/usb_gadget_unregister_driver()
implementation which is implemented in udc-core.c when DM_USB_GADGET
is enabled.
Replace dm_usb_gadget_handle_interrupts() with handle_interrupts ops
when DM_USB_GADGET is enabled.
Disable legacy struct usba_udc controller as controller point is extracted
from udevice private data with DM.
Disable legacy usba_udc_probe() to avoid conflict with DM when it's
enabled.
Compared to Linux driver only supported devices' DT bindings are included
(sorted as Linux driver)
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Add controller attach/detach support by using
usb_gadget_ops.pullup() function.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
usba_udc_enable()/_disable()
Rename atmel_usba_start() / atmel_usba_stop() to usba_udc_enable()
/ usba_udc_disable(), remove atmel_ prefix to be inline with other
functions. Also avoid confusion with DM start() / stop() functions.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
To make all static functions in the top, no functional change.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Replace "paramter" by "parameter".
Signed-off-by: Zixun LI <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
To have a uniform printing function, also drop linux/printk.h as no
longer used.
Signed-off-by: Zixun LI <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Sort includes in alphabetical order.
Signed-off-by: Zixun LI <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
tpm_tis_wait_init() is using the 'chip->timeout_b' field which is
initialized in tpm_tis_init(). However, the init-function is called
*after* tpm_tis_wait_init() introducing an uninitalized field access.
This commit switches both routines.
Signed-off-by: Lukas Funke <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
[Ilias removed unusged 'chip' definition in tpm_tis_spi_probe()]
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Fixes: a5c30c26b28 ("tpm: Use the new API on tpm2 spi driver")
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
If the maximum frequency is requested, we still fall into the CDR2
handling. But there the minimal divider is 2. For the sun6i and sun8i we
can do better with the CDR1 setting where the minimal divider is 1:
SPI_CLK = MOD_CLK / 2 ^ cdr with cdr = 0
Thus, handle the div = 1 case specially.
While at it, correct the comment above the calculation.
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
|
|
The CDR2 divider calculation always yield a frequency greater than the
requested one. Use DIV_ROUND_UP() to keep the frequency equal or below
the requested one. This way, we can also drop the "if div > 0" check
because we know for a fact that div cannot be zero.
FWIW, this aligns the CDR2 calculation with the linux driver.
Suggested-by: Andre Przywara <[email protected]>
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Andre Przywara <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series includes fixes to get some rockchip and nvidia boards
working again. It also drops the broken Beaglebone Black config and
provides a devicetree fix for coral (x86).
|
|
The code here is confusing due to large blocks which are #ifdefed out.
Add a function phase_sdram_init() which returns whether SDRAM init
should happen in the current phase, using that as needed to control the
code flow.
This increases code size by about 500 bytes in SPL when the cache is on,
since it must call the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <[email protected]>
|
|
At present gd->ram_size is 0 in SPL, meaning that it is not possible to
enable the cache. Correct this by always populating the RAM size
correctly.
This increases code size by about 500 bytes in SPL, since it must call
the rather large rockchip_sdram_size() function.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
There is new chip coming which is using new _lr suffix that's why record it
in the list to enable bitstream in bit format loading.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/12a939e2c88e82a9828852a8f7f33dfa14a6a4b8.1722351201.git.michal.simek@amd.com
|
|
Add support for ISSI 128MB flash IS25LP01GG. This part
supports 4byte opcodes. It also supports dual and quad
read.
Signed-off-by: Prasad Kummari <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
If "assigned-clock-rates" property is included in the
device tree, display driver probe is getting failed, as dp_video_ref
till dp_stc_ref clocks are missing from set rate function, adding
them to fix the probe failure.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Release the secondary cores through the PSCI request.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Add i.MX 8M Mini, Nano and Plus SoCs support.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Return CPU description string without newline character in the end.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Increase one more bit to cover all CPU types. Otherwise it shows
wrong CPU info on some platforms, such as i.MX8M Plus:
U-Boot 2024.04+g674440bc73e+p0 (Jun 06 2024 - 10:05:34 +0000)
CPU: NXP i.MX8MM Rev1.1 A53 at 4154504685 MHz at 30C
Model: NXP i.MX8MPlus LPDDR4 EVK board
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
The cpu_freq stores the current CPU frequency in Hz.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Michael Trimarchi <[email protected]>
|
|
Add empty release CPU core function for testing.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add a new callback release_core to the cpu_ops, which is used to
release a CPU core to run baremetal or RTOS application on a SoC
with multiple CPU cores.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Register ARM A53 core clock for i.MX 8M Mini, Nano and Plus, preparing
for enabling the 'cpu' command, which depends on this to print CPU core
frequency.
Signed-off-by: Hou Zhiqiang <[email protected]>
|
|
Print clk name in clk_enable and clk_disable. Make sense to know
what clock get disabled/enabled before a system crash or system
hang.
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Fix a logical inversion of the printed text.
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
|
|
Christian Marangi <[email protected]> says:
This series doesn't currently change anything and it does add all the
additional OPs to make support of OF_UPSTREAM.
While converting the mt7681/7686/7688/7623/7622 it was notice lots of
discrepancy between the downstream dtsi and the upstream one and the
clock ID between downstream clock ID and upstream clock ID.
Upstream reference clock by names and clock are handled by the
CCF (Common Clock Framework). The same can't be used here as we would
quickly reach the max space allocated before relocation.
The current mediatek clock driver reference all the parents and clocks
with offset from the clk ID related to the different tables.
Discrepancy between clock ID and the order in the clocks table cause
one clock referenced for another or even crash for trying to access
a clock at an offset that doesn't exist.
To handle this and permit use of OF_UPSTREAM, various measure and
changes are done to the mediatek clock driver to support it.
This series have all the generic clock changes. Once this is merged,
series for each SoC will came that will just change files in their
dedicated clock driver. This is to prevent massive patch and to
permit to split series, one for each SoC.
As said at the start, these changes doesn't cause regression and are
just expansion to the current API. Current behaviour is saved in every
possible way (aside from the first 2 patch that fixes latent bugs)
|
|
Add support for APMIXED parent in infra MUX. This is the case for mt7622
that reference APMIXED parents for the MUX1_SEL clock.
We assume the second level parent is always APMIXED.
Signed-off-by: Christian Marangi <[email protected]>
|
