| Age | Commit message (Collapse) | Author |
|---|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Reviewed-by: Tony Dinh <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
The constraints on the MMC_SUPPORTS_TUNING symbol can easily be
expressed in Kconfig (with the addition of SPL_MMC_SUPPORTS_TUNING).
Furthermore, in order to remove <common.h> from the MMC subsystem, the
way this symbol is used today needs to be changed in order to continue
functioning.
Reviewed-by: Jaehoon Chung <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The SCLK_USB3OTG_REF clocks is used as reference clock for USB3 block.
Add simple support to get rate of SCLK_USB3OTG_REF clocks to fix
reference clock period configuration.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The upstream DT binding added in linux-phy next commit a75d8056e9fe
("dt-bindings: phy: add rockchip usbdp combo phy document") does not
define subnodes for the type of PHY, instead it is expected that phandle
args are used for setting the type of the PHY.
phys = <&usbdp_phy0 PHY_TYPE_USB3>
Adopt the usbdp phy driver to work with upstream DT binding targeted for
Linux kernel v6.10.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Remove the rockchip_u3phy_uboot_init() function, it has no caller and is
not needed with proper driver model use.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The upstream Linux kernel driver find the phy-id from the io address.
Change to use a similar method as the U-Boot inno-usb2 phy driver and
the Linux kernel driver to set correct phy-id.
This is based on the linux-phy next commit 2f70bbddeb45 ("phy: rockchip:
add usbdp combo phy driver").
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The SCLK_USB3OTGx_REF clocks is used as reference clock for USB3 block.
Add simple support to get rate of SCLK_USB3OTGx_REF clocks to fix
reference clock period configuration.
Also replace use of 24000000 with the OSC_HZ constant.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
rk3399-nanopi-4.dtsi try to set parent of and set rate to 100 MHz of the
SCLK_PCIEPHY_REF clock.
The existing enable/disable ops for SCLK_PCIEPHY_REF currently force
use of 24 MHz parent and rate.
Add improved support for setting parent and rate of the pciephy refclk
to driver to better support assign-clock props for pciephy refclk in DT.
This limited implementation only support setting 24 or 100 MHz rate,
and expect npll and clk_pciephy_ref100m divider to use default values.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
rk3399.dtsi from linux v5.19 and newer try to set VDU clock rate to
400 MHz using an assigned-clock-rates prop of the CRU node.
U-Boot does not use or need this clock so add dummy support for getting
and setting ACLK_VDU clock rate to allow CRU driver to be loaded with an
updated rk3399.dtsi.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Sync rk3399-cru.h with one from Linux kernel v6.2+ and fix use of the
SCLK_DDRCLK name that was only used by U-Boot.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The file include/eeprom.h is used only in some legacy non-DM I2C EEPROM
access cases. Remove most inclusions of this file as they are not
needed.
Signed-off-by: Tom Rini <[email protected]>
|
|
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <[email protected]>
|
|
Differentiate between "Enable Random Number Generator support" and
"Enable Random Number Generator support" in Kconfig entry, mark the
first as CAAM and the second as DCP, otherwise users cannot easily
decide which of the options is which and enable the correct one.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add SPL variant of SPL_FSL_CAAM_RNG so that the SPL_FSL_CAAM_RNG can
be disabled in SPL if necessary. This may be necessary due to e.g.
size constraints of the SPL.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add SPL variant of DM_RNG so that the DM_RNG can be disabled in SPL
if necessary. This may be necessary due to e.g. size constraints of
the SPL.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Reset HW to clear old status and use default data mode(8-bit).
Signed-off-by: Jim Liu <[email protected]>
|
|
Add spi nor flash controller driver for cv1800b SoC
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Initialize register in cv1800b ethernet phy to make it compatible with
generic phy driver
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Add sysreset driver for cv1800b SoC
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Currently, only the receive delay is configured while the transmit delay
is not set, which may result in errors when writing to the file. This issue
can be resolved by setting PHY_TX_SRC_INVERT to SDHCI_PHY_TX_RX_DLY.
Signed-off-by: Kongyang Liu <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Judith Mendez <[email protected]> says:
The following patch series includes a MMC tuning algorithm
fix according to the following published paper [0].
This seris also includes fixes for OTAP/ITAP delay values
in j721e_4bit_sdhci_set_ios_post and for HS400 mode.
For DDR52 mode, also set ENDLL=1 and call am654_sdhci_setup_dll()
instead of am654_sdhci_setup_delay_chain() according to
device datasheet[1].
[0] https://www.ti.com/lit/an/spract9/spract9.pdf
[1] https://www.ti.com/lit/ds/symlink/am62p.pdf
|
|
At HS400 mode the ITAPDLY value is that from High Speed mode
which is incorrect and may cause boot failures.
The ITAPDLY for HS400 speed mode should be the same as ITAPDLY
as HS200 timing after tuning is executed. Add the functionality
to save ITAPDLY from HS200 tuning and save as HS400 ITAPDLY.
Fixes: c964447ea3d6 ("mmc: am654_sdhci: Add support for input tap delay")
Signed-off-by: Judith Mendez <[email protected]>
|
|
According to the device datasheet [0], ENDLL=1 for
DDR52 mode, so call am654_sdhci_setup_dll() and write
itapdly after since we do not carry out tuning.
[0] https://www.ti.com/lit/ds/symlink/am62p.pdf
Fixes: c964447ea3d6 ("mmc: am654_sdhci: Add support for input tap delay")
Signed-off-by: Judith Mendez <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Set itap_del_ena if ITAPDLY is found in DT or if the tuning
algorithm was executed and found the optimal ITAPDLY. Add the
functionality to save ITAPDLYENA that can be referenced later
by storing the bit in array itap_del_ena[].
Signed-off-by: Judith Mendez <[email protected]>
|
|
U-Boot is failing to boot class U1 UHS SD cards due to incorrect
OTAP and ITAP delay select values. Update OTAP and ITAP delay select
values from DT.
Fixes: c7d106b4eb3 ("mmc: am654_sdhci: Update output tap delay writes")
Signed-off-by: Nitin Yadav <[email protected]>
Signed-off-by: Judith Mendez <[email protected]>
|
|
Currently the sdhci_am654 driver only supports one tuning
algorithm which should be used only when DLL is enabled. The
ITAPDLY is selected from the largest passing window and the
buffer is viewed as a circular buffer.
The new tuning algorithm should be used when the delay chain
is enabled; the ITAPDLY is selected from the largest passing
window and the buffer is not viewed as a circular buffer.
This implementation is based off of the following paper: [1].
Also add support for multiple failing windows.
[1] https://www.ti.com/lit/an/spract9/spract9.pdf
Fixes: a759abf569d4 ("mmc: am654_sdhci: Add support for software tuning")
Signed-off-by: Judith Mendez <[email protected]>
|
|
Linux kernel driver drivers/mfd/tps6594-i2c.c is using different
name for compatible for tps6594 family PMIC.
After sync of Linux kernel DT to u-boot for TI platforms
J7200, J721S2 and J784S4 PMIC is no longer getting probed.
So updating compatible field to align with Linux driver and DT.
Signed-off-by: Udit Kumar <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Reuse TPS65941 regulator driver to adds support for
TPS65224 PMIC's regulators. 4 BUCKs and 3 LDOs, where
BUCK1 and BUCK2 can be configured in dual phase mode.
Signed-off-by: Bhargav Raviprakash <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Use function callbacks for volt2val, val2volt and slewrate lookups.
This makes it easier to add support for TPS65224 PMIC regulators.
Signed-off-by: Bhargav Raviprakash <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Adds macros for buck and ldo ids and switched to using switch
case instead of if else in probe functions. Helps in adding
support for TPS65224 PMIC.
Signed-off-by: Bhargav Raviprakash <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Adds compatible and data field values of TPS65224 driver in
TPS65941 PMIC driver.
Signed-off-by: Bhargav Raviprakash <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
Please pull the updates for rockchip platform:
- dts sync for rk3308;
- sdram: Support getting banks from TPL for rk3568 and rk3588;
- dts and config clean and sync up for rk3568/rk3588;
- Other misc fixes;
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/20543
|
