summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-10-10blk: sandbox: Support binding a device with a given logical block sizeBin Meng
Allow optionally set the logical block size of the host device to bind in the "host bind" command. If not given, defaults to 512. Signed-off-by: Bin Meng <[email protected]>
2023-10-10blk: Use a macro for the typical block sizeBin Meng
Avoid using the magic number 512 directly. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-10-10net: phy: xilinx_phy: Get rid of using property xlnx, phy-typeVenkatesh Yadav Abbarapu
As the xlnx,phy-type device tree property is deprecated and phy-mode is being used, so removing the code references of xlnx,phy-type. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-10-10spi: nxp_fspi: reset the FLSHxCR1 registersHan Xu
Reset the FLSHxCR1 registers to default value. ROM may set the register value and it affects the SPI NAND normal functions. Signed-off-by: Han Xu <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-10-10drivers: net: fsl-mc: add support for MC reserved memoryLaurentiu Tudor
Add support for declaring in device tree the reserved memory ranges required for MC. Since the MC firmware acts as any DMA master present in the SoC, the reserved memory ranges need also be identity mapped in the SMMU, so create the required 'iommu-addresses' property in the reserved memory nodes. For now this support is used only on LX2160A SoCs. Signed-off-by: Laurentiu Tudor <[email protected]> Signed-off-by: Peng Fan <[email protected]>
2023-10-09dm: serial: fix serial_post_probe()Heinrich Schuchardt
The size of the name of a udevice is not limited. When setting the fixed sized name field of a stdio device we must ensure that the target string is NUL terminated to avoid buffer overflows. Fixes: 57d92753d4ca ("dm: Add a uclass for serial devices") Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-10-09mailbox: k3-sec-proxy: fix error handling for missing scfg in FDTMatthias Schiffer
The wrong field was checked. Fixes: f9aa41023bd9 ("mailbox: Introduce K3 Secure Proxy Driver") Signed-off-by: Matthias Schiffer <[email protected]> Reviewed-by: Nishanth Menon <[email protected]>
2023-10-09Revert "clk: versal: Enable clock driver for Versal NET"Michal Simek
This partially reverts commit ff33227819f579ffb963e0dac6bc6a6566b89563. Versal NET clock node should use "xlnx,versal-net-clk", "xlnx,versal-clk" compatible string that's why it is not necessary to define Versal NET specific compatible string if there is no any other change needed. It can be get back if there is a need to differentiate clock support between Versal and Versal NET. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/c09276022db5f1b150679cc7a9f9583363ace2fb.1695808971.git.michal.simek@amd.com
2023-10-09arm64: zynqmp: Fix Siva's email address formatMichal Simek
Some patches didn't have his full name and also there was one more ">" at the end of email address. That's why correct both of these issues. Fixes: 174d728471d5 ("arm64: zynqmp: Switch to amd.com emails") Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/e970cc0dfabe293c2baf6b231d34f3af0386f1eb.1695378830.git.michal.simek@amd.com
2023-10-09pinctrl: zynqmp: Display the tristate configuration for all pinsVenkatesh Yadav Abbarapu
Read the tristate config for all the pins and display it. ZynqMP> pinmux status MIO1 MIO1: slew:fast bias:enabled pull:up input:cmos drive:12mA volt:1.8 tri_state:enabled Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-10-09net: zynq_gem: Update the MDC clock divisor in the probe functionVenkatesh Yadav Abbarapu
MDC clock change needs to be done when the driver probe function is called as mdio is enabled at probe and not when the ethernet starts. Setup the MDC clock at the probe itself. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2023-10-08Merge tag 'u-boot-rockchip-20231007' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Add Board: rk3568 Bananapi R2Pro; - Update pcie bifurcation support; - dwc_eth_qos controller support for rk3568 and rk3588; - Compressed binary support for U-Boot on rockchip platform; - dts and config updates for different board and soc; [ trini: Fix conflict on include/spl.h ] Signed-off-by: Tom Rini <[email protected]>
2023-10-07power: pmic: rk8xx: Fix power-on source check in SPLJonas Karlman
The commit 30975fb73d51 ("rockchip: Add option to prevent booting on power plug-in") introduce an option to prevent booting a device when the device was powered on due to power plug-in instead of pressing a power button. This feature works by checking the power-on source during PMIC probe and powers off the device if power-on source was power plug-in. This check currently runs very late at PMIC probe in U-Boot proper. Fix so that the power-on source check can work at probe time in SPL. Also enable probe after bind and remove the PMIC banner in SPL. With this we can use ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON and SPL_PMIC_RK8XX to power off the device very quickly after TPL instead of after TF-A and U-Boot proper has been loaded and run. DDR V1.18 f366f69a7d typ 23/07/17-15:48:58 ln LP4/4x derate en, other dram:1x trefi ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=16 Size=8192MB change to: 324MHz clk skew:0x64 change to: 528MHz clk skew:0x58 change to: 780MHz clk skew:0x58 change to: 1056MHz(final freq) clk skew:0x40 out Power Off due to plug-in event Fixes: 30975fb73d51 ("rockchip: Add option to prevent booting on power plug-in") Signed-off-by: Jonas Karlman <[email protected]>
2023-10-07power: pmic: rk8xx: Use sysreset implementation of the poweroff commandJonas Karlman
Select SYSRESET_CMD_POWEROFF to use the sysreset implementation of the poweroff command when PMIC_RK8XX is enabled. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07net: dwc_eth_qos_rockchip: Add support for RK3588Jonas Karlman
Add rk_gmac_ops and other special handling that is needed for GMAC to work on RK3588. rk_gmac_ops was ported from linux commits: 2f2b60a0ec28 ("net: ethernet: stmmac: dwmac-rk: Add gmac support for rk3588") 88619e77b33d ("net: stmmac: rk3588: Allow multiple gmac controller") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-10-07net: dwc_eth_qos: Add glue driver for GMAC on Rockchip RK3568Jonas Karlman
Add a new glue driver for Rockchip SoCs, i.e RK3568, with a GMAC based on Synopsys DWC Ethernet QoS IP. rk_gmac_ops was ported from linux commit: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-10-07net: dwc_eth_qos: Stop spam of RX packet not available messageJonas Karlman
Remove spam of RX packet not available debug messages when waiting to receive a packet. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-10-07net: dwc_eth_qos: Return error code when start failsJonas Karlman
Return error code when phy_connect fails or no link can be established. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-10-07net: dwc_eth_qos: Drop unused rx_pkt from eqos_privJonas Karlman
rx_pkt is allocated and not used for anything, remove it. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]> Reviewed-by: Ramon Fried <[email protected]>
2023-10-07rockchip: Port IO-domain driver for RK3568 from linuxJonas Karlman
Port the Rockchip IO-domain driver for RK3568 from linux. The driver auto probe after bind to configure IO-domain based on the regulator voltage. Compared to the linux driver this driver is not notified about regulator voltage changes and only configure IO-domain based on the initial voltage autoset by the regulator. It is not recommended to enable MMC_IO_VOLTAGE or the mmc signal voltage and IO-domain may end up out of sync. Based on the linux commit 28b05a64e47c ("soc: rockchip: io-domain: add rk3568 support"). Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07regulator: rk8xx: Return correct voltage for switchout convertersshengfei Xu
The voltage value for switchout converters is always reported as 0 uV. When the switch is enabled, it's voltage is same as input supply. Fix this by implementing get_value for switchout converters. Fixes: ee30068fa574 ("power: pmic: rk809: support rk809 pmic") Signed-off-by: shengfei Xu <[email protected]> [[email protected]: fix checkpatch error, update commit message] Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07regulator: rk8xx: Return correct voltage for buck convertersJoseph Chen
Information from the first range group is always used to calculate the voltage returned for buck converters. This may result in wrong voltage reported back to the regulator_get_value caller. Traverse all the possible BUCK ranges to fix this issue. Fixes: addd062beacc ("power: pmic: rk816: support rk816 pmic") Fixes: b62280745e55 ("power: pmic: rk805: support rk805 pmic") Fixes: b4a35574b38d ("power: pmic: rk817: support rk817 pmic") Fixes: ee30068fa574 ("power: pmic: rk809: support rk809 pmic") Signed-off-by: Joseph Chen <[email protected]> [[email protected]: fix checkpatch error, simplify buck get_value, update commit message] Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07power: regulator: Only run autoset once for each regulatorJonas Karlman
With the commit 4fcba5d556b4 ("regulator: implement basic reference counter"), keeping regulator enablement in balance become more important. Calling regulator_autoset multiple times on a fixed regulator increase the enable count for each call, resulting in an unbalanced enable count. Introduce a AUTOSET_DONE flag and use it to mark that autoset has run for the regulator. Return -EALREADY on any subsequent call to autoset. This fixes so that the enable count is only ever increased by one per regulator for autoset. Fixes: 4fcba5d556b4 ("regulator: implement basic reference counter") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07phy: rockchip: naneng-combphy: Use signal from comb PHY on RK3588Jonas Karlman
Route signal from comb PHY instead of PCIe3 PHY to PCIe1l0 and PCIe1l1. Fixes use of pcie2x1l0 on ROCK 5B. Code imported from mainline linux driver. Fixes: c5b4a012bca8 ("phy: rockchip: naneng-combphy: Support rk3588") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07phy: rockchip: snps-pcie3: Add support for RK3588Jonas Karlman
Add support for the RK3588 variant to the driver. Code imported almost 1:1 from mainline linux driver. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07phy: rockchip: snps-pcie3: Add bifurcation support for RK3568Jonas Karlman
Configure aggregation or bifurcation mode on RK3568 based on the value of data-lanes property. Code imported almost 1:1 from mainline linux driver. Fixes: 6ec62b6ca698 ("phy: rockchip: Add Rockchip Synopsys PCIe 3.0 PHY") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07phy: rockchip: snps-pcie3: Refactor to use a phy_init opsJonas Karlman
Add a phy_init ops in preparation for upcoming support of a RK3588 variant in the driver. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07phy: rockchip: snps-pcie3: Refactor to use clk_bulk APIJonas Karlman
Change to use clk_bulk API and syscon_regmap_lookup_by_phandle to simplify in preparation for upcoming support of a RK3588 variant. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-07pci: pcie_dw_rockchip: Configure number of lanes and link width speedJonas Karlman
Set number of lanes and link width speed control register based on the num-lanes property. Code imported almost 1:1 from dw_pcie_setup in mainline linux. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-10-06pci: serial: Support reading PCI-register size with baseSimon Glass
The PCI helpers read only the base address for a PCI region. In some cases the size is needed as well, e.g. to pass along to a driver which needs to know the size of its register area. Update the functions to allow the size to be returned. For serial, record the information and provided it with the serial_info() call. A limitation still exists in that the size is not available when OF_LIVE is enabled, so take account of that in the tests. Signed-off-by: Simon Glass <[email protected]>
2023-10-06serial: Drop ns16550 serial_getinfo() in SPLSimon Glass
This is typically not needed in SPL/TPL and increases the code size. Drop it. Signed-off-by: Simon Glass <[email protected]>
2023-10-06sandbox: Init the EC properly even if no state file is availableSimon Glass
This currently relies on sandbox attempting to read a state file. At present it always does, even when there is no state file, in which case it fails, but still inits the EC. That is a bug, so update this driver to set the current image always, even if no state is read. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Support writing a 64-bit valueSimon Glass
Add support for writing a single 64-bit value into a property. Repurpose the existing tests to handle this case too. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Support writing a booleanSimon Glass
Add functions to write a boolean property. This involves deleting it if the value is false. Add a new ofnode_has_property() as well. Add a comment about the behaviour of of_read_property() when the property value is empty. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Add a way to convert a devicetree to a dtbSimon Glass
Add a way to flatten a devicetree into binary form. For livetree this involves generating the devicetree using fdt_property() and other calls. For flattree it simply involves providing the buffer containing the tree. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Add a way to delete a nodeSimon Glass
Add a function to delete a node in an existing tree. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Add a way to copy a nodeSimon Glass
Add a function to copy a node to another place under a new name. This is useful at least for testing, since copying a test node with existing properties is easier than writing the code to generate it all afresh. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Add a function to create an empty treeSimon Glass
Provide a function to create a new, empty tree. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Reverse the argument order in ofnode_copy_props()Simon Glass
Follow the order used by memcpy() as it may be less confusing. Signed-off-by: Simon Glass <[email protected]>
2023-10-06dm: core: Correct help in TPL_DM and VPL_DMSimon Glass
There are copying errors in the help. Fix these. Signed-off-by: Simon Glass <[email protected]>
2023-10-06serial: Drop mention of SPL/TPL_SYS_MALLOC_FSimon Glass
These symbols do not (yet) exist, so drop the usage of them in the serial Kconfig file. It has no effect. Signed-off-by: Simon Glass <[email protected]>
2023-10-06spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_...Simon Glass
We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Marcel Ziswiler <[email protected]> Reviewed-by: Martyn Welch <[email protected]> Reviewed-by: Svyatoslav Ryhel <[email protected]>
2023-10-05Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
+ ae350: modify memory layout and target name + ae350: use generic RISC-V timer driver in S-mode + Support bootstage report for RISC-V + Support C extension exception command for RISC-V + Add Starfive timer support
2023-10-05Merge branch '2023-10-04-TI-dts-updates'Tom Rini
- Resync some TI K3 DTS files, to fix booting on them.
2023-10-04Merge tag 'dm-pull-4oct23' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
moveconfig: enhance output; rename to qconfig
2023-10-04drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is upNeha Malcom Francis
When setting up boot media to load the TIFS binary in legacy boot flow (followed by J721E), get_timer() is called which calls dm_timer_init() which then gets the tick-timer: mcu_timer0. mcu_timer0 uses k3_clks (clock controller) and k3_pds (power controller) from the dmsc node that forces probe of the ti_sci driver of TIFS that hasn't been loaded yet! Running ti_sci_cmd_get_revision from the probe leads to panic since no TIFS and board config binaries have been loaded yet. Resolve this by moving ti_sci_cmd_get_revision to ti_sci_get_handle_from_sysfw as a common point of invocation for both legacy and combined boot flows. Before doing this, it is important to go through whether any sync points exist where revision is needed before ti_sci_get_handle_from_sysfw is invoked. Going through the code along with boot tests on both flows ensures that there are none. Signed-off-by: Neha Malcom Francis <[email protected]>
2023-10-04dm: core: Adjust dump-sorting to get stats only when neededSimon Glass
If we are not sorting the tree we don't need to get the stats. Adjust the code to avoid the wasted time. Signed-off-by: Simon Glass <[email protected]>
2023-10-04Merge tag 'u-boot-stm32-20231004' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm STM32 MCU: _ alignment with kernel DT v6.5 for stm32f429 and stm32f746 _ rework way of displaying ST logo for stm32f746-disco and stm32f769-disco STM32 MPU: _ alignment with kernel DT v6.6-rc1 _ add RNG support for stm32mp13 _ add USB, USB boot and stm32prog command support for stm32mp13 _ add support of USART1 clock for stm32mp1 _ only print RAM and board code with SPL_DISPLAY_PRINT flag for stm32mp1 _ rename update_sf to dh_update_sd_to_sf and add dh_update_sd_to_emmc for stm32mp15xx DHCOR [ Fix merge conflict at board/st/common/stm32mp_dfu.c ] Signed-off-by: Tom Rini <[email protected]>
2023-10-04clk: stm32mp1: Add support for USART1 clockAnatolij Gustschin
Add USART1 clock parents and mux configuration. This allows support for configuring the USART1 as the serial console in SPL and U-Boot via device tree. Without this patch the SPL with usart1 serial console enabled crashes because it can not find the clock specified in the device tree for usart1. Signed-off-by: Anatolij Gustschin <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2023-10-04ram: stm32mp1: Only print RAM config with CONFIG_SPL_DISPLAY_PRINTHarald Seiler
Ensure that the RAM configuration line is only printed when CONFIG_SPL_DISPLAY_PRINT is set. Signed-off-by: Harald Seiler <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-27 05:54:40 +0000