summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-09-15board: usb: Replace legacy usb_gadget_handle_interrupts()Marek Vasut
The usb_gadget_handle_interrupts() is no longer used anywhere, replace the remaining uses with dm_usb_gadget_handle_interrupts() which takes udevice as a parameter. Some of the UDC drivers currently ignore the index parameter altogether, those also ignore the udevice and have to be reworked. Other like the dwc3_uboot_handle_interrupt() had to be switched from index to udevice look up to avoid breakage. Reviewed-by: Mattijs Korpershoek <[email protected]> Tested-by: Mattijs Korpershoek <[email protected]> # on khadas vim3 Signed-off-by: Marek Vasut <[email protected]>
2023-09-15dm: usb: udc: Drop legacy udevice handler functionsMarek Vasut
Remove legacy functions limited by the dev_array array, those are no longer used anywhere, all the code uses plain udevice based access now. The usb_gadget_handle_interrupts() is doing udevice look up until all call sites use dm_usb_gadget_handle_interrupts(). Reviewed-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-15usb: gadget: ether: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-09-15usb: gadget: acm: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-09-15thordown: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Mattijs Korpershoek <[email protected]>
2023-09-15sdp: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Reviewed-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-15cmd: ums: Use plain udevice for UDC controller interactionMarek Vasut
Convert to plain udevice interaction with UDC controller device, avoid the use of UDC uclass dev_array . Reviewed-by: Mattijs Korpershoek <[email protected]> Tested-by: Mattijs Korpershoek <[email protected]> # on khadas vim3 Signed-off-by: Marek Vasut <[email protected]>
2023-09-15usb: sandbox: Add DM_USB_GADGET supportMarek Vasut
Remove local usb_gadget_register_driver()/usb_gadget_unregister_driver() implementation which is implemented in udc-core.c instead if DM_USB_GADGET is enabled. Add no-op dm_usb_gadget_handle_interrupts() implementation. Reviewed-by: Mattijs Korpershoek <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-15dm: usb: udc: Factor out plain udevice handler functionsMarek Vasut
Pull the functionality of UDC uclass that operates on plain udevice and does not use this dev_array array into separate functions and expose those functions, so that as much code as possible can be switched over to these functions and the dev_array can be dropped. Reviewed-by: Mattijs Korpershoek <[email protected]> Signed-off-by: Marek Vasut <[email protected]>
2023-09-14wdt: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14timer: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14sysreset: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14spi: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14serial: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14net: phy: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14net: miiphybb: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14sf: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14hwspinlock: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14gpio: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14crypto: rsa: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14cpu: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14dm: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-14blkcache: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <[email protected]>
2023-09-13phy: Refactor generic_{setup, shutdown}_phy() to reduce complexityJonas Karlman
Refactor generic_{setup,shutdown}_phy() to reduce complexity and indentation. This have no intended functional change. Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13phy: Return success from generic_setup_phy() when phy is not foundJonas Karlman
Restore the old behavior of ehci_setup_phy() and ohci_setup_phy() to return success when generic_phy_get_by_index() return -ENOENT. Fixes: 84e561407a5f ("phy: Add generic_{setup,shutdown}_phy() helpers") Fixes: 10005004db73 ("usb: ohci: Make usage of generic_{setup,shutdown}_phy() helpers") Fixes: 083f8aa978a8 ("usb: ehci: Make usage of generic_{setup,shutdown}_phy() helpers") Fixes: 75341e9c16aa ("usb: ehci: Remove unused ehci_{setup,shutdown}_phy() helpers") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13phy: Fix generic_setup_phy() return value on power on failureJonas Karlman
generic_phy_exit() typically return 0 for a struct phy that has been initialized with a generic_phy_init() call. generic_setup_phy() returns the value from a generic_phy_exit() call when generic_phy_power_on() fails. This hides the failed state of the power_on ops from the caller of generic_setup_phy(). Fix this by ignoring the return value of the generic_phy_exit() call and return the value from the generic_phy_power_on() call. Fixes: 84e561407a5f ("phy: Add generic_{setup,shutdown}_phy() helpers") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13video: rockchip: dw_mipi_dsi: Use generic_phy_valid() helperJonas Karlman
The documentation for struct phy state that "The content of the structure is managed solely by the PHY API and PHY drivers". Change to use the generic_phy_valid() helper to check if phy is valid. Fixes: b7d8d40346f2 ("video: rockchip: dw_mipi_dsi: Fix external phy existence check") Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-09-13net: zynq: Use generic_phy_valid() helperJonas Karlman
The documentation for struct phy state that "The content of the structure is managed solely by the PHY API and PHY drivers". Change to use the generic_phy_valid() helper to check if phy is valid. Fixes: 10c50b1facbf ("net: zynq: Add support for PHY configuration in SGMII mode") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13scsi: ceva: Use generic_phy_valid() helperJonas Karlman
The documentation for struct phy state that "The content of the structure is managed solely by the PHY API and PHY drivers". Change to use the generic_phy_valid() helper to check if phy is valid. Fixes: f6f5451d469b ("scsi: ceva: Enable PHY and reset support") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13usb: dwc3: Use generic_phy_valid() helperJonas Karlman
The documentation for struct phy state that "The content of the structure is managed solely by the PHY API and PHY drivers". Change to use the generic_phy_valid() helper to check if phy is valid. Also remove setting phy->dev to NULL now that generic_phy_get_by_name() properly initialize phy->dev to NULL. Fixes: 142d50fbce7c ("usb: dwc3: Add support for usb3-phy PHY configuration") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13phy: Set phy->dev to NULL when generic_phy_get_by_index_nodev() failsJonas Karlman
Generic phy helpers typically use generic_phy_valid() to determine if the helper should perform its function on a passed struct phy. generic_phy_valid() treat any struct phy having phy->dev set as valid. With generic_phy_get_by_index_nodev() setting phy->dev to a valid struct udevice early, there can be situations where the struct phy is returned as valid when initialization in fact failed and returned an error. Fix this by setting phy->dev back to NULL when any of the calls to of_xlate ops, device_get_supply_regulator or phy_alloc_counts fail. Also extend the dm_test_phy_base test with a test where of_xlate ops fail. Fixes: 72e5016f878d ("drivers: phy: add generic PHY framework") Fixes: b9688df3cbf4 ("drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13phy: Set phy->dev to NULL when generic_phy_get_by_name() failsJonas Karlman
generic_phy_get_by_name() does not initialize phy->dev to NULL before returning when dev_read_stringlist_search() fails. This can lead to an uninitialized or reused struct phy erroneously be report as valid by generic_phy_valid(). Fix this issue by initializing phy->dev to NULL, also extend the dm_test_phy_base test with calls to generic_phy_valid(). Fixes: b9688df3cbf4 ("drivers: phy: Set phy->dev to NULL when generic_phy_get_by_index() fails") Fixes: 868d58f69c7c ("usb: dwc3: Fix non-usb3 configurations") Signed-off-by: Jonas Karlman <[email protected]>
2023-09-13net: phy: broadcom: add support for BCM54210EMarek Vasut
It's Broadcom PHY simply described as single-port RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK bits. BCM54210E support ported from Linux kernel commit 0fc9ae1076697 ("net: phy: broadcom: add support for BCM54210E") AUX/SHD/bcm54xx_config_clock_delay update ported from Linux 6.5-rc4 commit 28e219aea0b9e ("net: phy: broadcom: drop brcm_phy_setbits() and use phy_set_bits() instead") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Rafał Miłecki <[email protected]>
2023-09-13net: phy: motorcomm: Add support for YT8511 PHYNicolas Frattaroli
The YT8511 ethernet PHYs can be found on e.g. the SOQuartz or the Quartz64. Add rudimentary support for them. Signed-off-by: Nicolas Frattaroli <[email protected]>
2023-09-09ufs: ufs-renesas: Drop include common.hMarek Vasut
The "#include <common.h>" is being phased out in favor of more fine grained header management, i.e. ideally include a subset of headers that are really needed. Remove it from this driver. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-09-09ufs: ufs-renesas: Add support for Renesas R-Car UFS controllerMarek Vasut
Add support for Renesas R-Car UFS controller which needs vendor-specific initialization. Ported from Linux kernel as of commit c2ab666072bc ("scsi: ufs: Explicitly include correct DT includes") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-09-09clk: Add GPIO-controlled clock gate driverMarek Vasut
Add driver which implements GPIO-controlled clock. The GPIO is used as a gate to enable/disable the clock. This matches linux clk-gpio.c driver, however this does not implement the GPIO mux part, which in U-Boot DM would be better fit in separate driver. Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Sean Anderson <[email protected]>
2023-09-06Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-usb ↵Tom Rini
into next
2023-09-05Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- DWC3 fix on Layerscape
2023-09-05Merge tag 'u-boot-imx-20230905' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for release ----------------- - imx9: fix DRAM calculation - thermal: fixes - fixed for DM, DH and Gateworks boards CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/17639
2023-09-05risc-v: implement DBCN based debug consoleHeinrich Schuchardt
Use the DBCN SBI extension to implement a debug console. Make it the default for S-mode RISC-V. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2023-09-05riscv: allow riscv timer to be instantiated via device treeTorsten Duwe
For the architectural timer on riscv, there already is a defined device tree binding[1]. Allow timer instances to be created from device tree matches, but for now retain the old mechanism, which registers the timer biggy-back with the CPU. [1] linux/Documentation/devicetree/bindings/timer/riscv,timer.yaml Signed-off-by: Torsten Duwe <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2023-09-04usb: host: ohci-generic: Make usage of clock/reset bulk() APIFabrice Gasnier
Make usage of clock and reset bulk API in order to simplify the code Reviewed-by: Marek Vasut <[email protected]> Signed-off-by: Fabrice Gasnier <[email protected]> Reviewed-by: Xavier Drudis Ferran <[email protected]>
2023-09-04usb: check for companion controller in uclassFabrice Gasnier
EHCI is usually used with companion controller (like OHCI) as companion controller. This information on the companion is missing currently in companion drivers. So, if the usb-uclass isn't aware, it may scan busses in any order: OHCI first, then EHCI. This is seen on STM32MP1 where DT probing makes the probe order to occur by increasing address (OHCI address < EHCI address). When a low speed or full-speed device is plugged in, it's not detected as EHCI should first detect it, and give ownership (handover) to OHCI. Current situation on STM32MP1 (with a low speed device plugged-in) STM32MP> usb start starting USB... Bus usb@5800c000: USB OHCI 1.0 Bus usb@5800d000: USB EHCI 1.00 scanning bus usb@5800c000 for devices... 1 USB Device(s) found scanning bus usb@5800d000 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found The "companion" property in the device tree allow to retrieve companion controller information, from the EHCI node. This allow marking the companion driver as such. With this patch (same low speed device plugged in): STM32MP> usb start starting USB... Bus usb@5800c000: USB OHCI 1.0 Bus usb@5800d000: USB EHCI 1.00 scanning bus usb@5800d000 for devices... 1 USB Device(s) found scanning bus usb@5800c000 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found STM32MP> usb tree USB device tree: 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Human Interface (1.5 Mb/s, 100mA) HP HP USB 1000dpi Laser Mouse 1 Hub (480 Mb/s, 0mA) u-boot EHCI Host Controller This also optimize bus scan when a High speed device is plugged in, as the usb-uclass skips OHCI in this case: STM32MP> usb reset resetting USB... Bus usb@5800c000: USB OHCI 1.0 Bus usb@5800d000: USB EHCI 1.00 scanning bus usb@5800d000 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found STM32MP> usb tree USB device tree: 1 Hub (480 Mb/s, 0mA) | u-boot EHCI Host Controller | +-2 Mass Storage (480 Mb/s, 200mA) SanDisk Cruzer Blade 03003432021922011407 Signed-off-by: Fabrice Gasnier <[email protected]> Reviewed-by: Marek Vasut <[email protected]>
2023-09-04thermal: imx_tmu: Increase the polling intervalFabio Estevam
Polling every second to check whether the CPU has cooled down is too frequent. Allow more time for the CPU to cool down by increasing the polling interval to 5 seconds by defaut. This value is used in the absence of the 'polling-delay' devicetree property. Signed-off-by: Fabio Estevam <[email protected]>
2023-09-04thermal: imx_tmu: Fix the temperature unitFabio Estevam
The temperature unit is millidegree Celsius, so divide by 1000 to correctly print the temperature values in Celsius. While at it, also change a typo: "has beyond" to "is beyond". Signed-off-by: Fabio Estevam <[email protected]>
2023-09-04thermal: imx_tmu: Increase the log level for high temperaturesFabio Estevam
dev_info() message is not printed by default. Increase the log level to dev_crit(). This allows the critical messages related to the temperature getting beyong the alert threshold to be displayed. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-09-04thermal: imx_tmu: Fix the polling defaultFabio Estevam
When the 'polling-delay' property is not passed via devicetree, pdata->polling_delay keeps at 0. This causes the imx_tmu driver to get stuck inside the busy while() loop when the CPU temperature is above the alert point. Fix this problem by passing a one second polling interval, which provides a proper delay to let the system to cool down and exit the while() loop when the temperature is below the alert point. Signed-off-by: Fabio Estevam <[email protected]>
2023-09-04Merge tag 'v2023.10-rc4' into nextTom Rini
Prepare v2023.10-rc4
2023-09-04usb: dwc3: Fix enabling USB_DR_MODE_HOSTOleksandr Suvorov
The original logic always enables USB_DR_MODE_HOST operation mode in dwc3_layerscape_bind() in u-boot. Prevent choosing USB_DR_MODE_HOST operation mode if USB_HOST is not enabled. Fixes: 2b0b51d0bed ("usb: dwc3: add layerscape support") Signed-off-by: Oleksandr Suvorov <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-03 09:00:03 +0000