summaryrefslogtreecommitdiff
path: root/dts/upstream/src/arm64/allwinner
AgeCommit message (Collapse)Author
2026-04-20Subtree merge tag 'v7.0-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git - Remove netc_timerX nodes from arch/arm/dts/imx943-u-boot.dtsi as they are now upstream - Move dts/upstream/include/dt-bindings/reset/bcm6318-reset.h to include/dt-bindings/reset/bcm6318-reset.h as upstream has removed this file as unused (but we use it). Signed-off-by: Tom Rini <[email protected]>
2026-02-10Subtree merge tag 'v6.19-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git
2025-12-19Subtree merge tag 'v6.18-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git
2025-10-08Subtree merge tag 'v6.17-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git
2025-07-30Subtree merge tag 'v6.16-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git Perform a few fixups in our dts* files to match upstream changes. Signed-off-by: Tom Rini <[email protected]>
2025-07-27arm64: dts: allwinner: a523: add Avaota-A1 router supportAndre Przywara
The Avaota A1 router board is an Open Source hardware board, designed by YuzukiHD. Pine64 produces some boards and sells them. It uses the Allwinner A527 or T527 SoC, and comes with the following features: - Eight ARM Cortex-A55 cores, Mali-G57 MC1 GPU - 1GiB/2GiB/4GiB LPDDR4 DRAM - AXP717 + AXP323 PMIC - Raspberry-Pi-2 compatible GPIO header - 1 USB 2.0 type A host port, 1 USB 3.0 type A host post - 1 USB 2.0 type C port (OTG + serial debug) - MicroSD slot - eMMC between 16 and 128 GiB - on-board 16MiB bootable SPI NOR flash - two 1Gbps Ethernet ports (via RTL8211F PHYs) - HDMI port - DP port - camera and LCD connectors - 3.5mm headphone jack - (yet) unsupported WiFi/BT chip - 1.3" LC display, connected via SPI - 12 V barrel plug for power supply Add the devicetree file describing the currently supported features. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://patch.msgid.link/[email protected] [[email protected]: Squash in SD card detect pull resistor fix] Link: https://patch.msgid.link/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: dbe54efa32afe5b82763c015cbe9e64c4d4e117a ] (cherry picked from commit ebcb8469ef4336c05c6b9f409714a23cfc891fff)
2025-07-27arm64: dts: allwinner: a523: add Radxa A5E supportAndre Przywara
The Radxa A5E is a development board using the Allwinner A527 SoC, which is using the same die as the A523 SoC, just exposing the pins of more peripherals (like HDMI or the 2nd MAC). The board features: - Allwinner A527/T527 SoC: 8 ARM Cortex-A55 cores, Mali-G57 MC1 GPU - 1GiB/2GiB/4GiB LPDDR4 DRAM - AXP717 + AXP323 PMICs - Raspberry-Pi-2 compatible 40pin GPIO header - 1 USB 2.0 type C port (OTG), also power supply - 1 USB 3.0 type A host port (multiplexed with M.2 slot) - 1 M.2 M-key 2230 slot, with 1 PCIe2.1 lane connected (multiplexed with USB 3.0 port) - MicroSD slot - optional eMMC, 8, 16 or 32GB available - optional on-board 16MiB bootable SPI NOR flash - two 1Gbps Ethernet ports (via MAXIO MAE0621A PHYs) - PoE header for optional supply circuit on one Ethernet port - WiFi 802.11 a/b/g/n/ac/ax (LB-Link BL-M8800DS2 module using AIC8800) - HDMI port - camera and LCD connectors - power supply via USB-C connector (but no PD) or GPIO header pins This .dts describes the devices as far as we support them at the moment. The PMIC rails have been assigned as per the schematics. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://patch.msgid.link/[email protected] [[email protected]: Squash in SD card detect pull resistor fix] Link: https://patch.msgid.link/[email protected] [[email protected]: Rename dts file to sun55i-a527-cubie-a5e.dts] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: c2520cd032ae8ca3fdaf77b3f3aa687c8cb7843f ] (cherry picked from commit 91ad117321c0901094c1d6467df90f5f6757569a)
2025-07-27arm64: dts: allwinner: a523: add X96Q-Pro+ supportAndre Przywara
The X96QPro+ is a TV box using the Allwinner H728 SoC. That SoC seems to be a package variant of the A523 family, at least it uses the same SoC ID and is compatible as far as we can assess. It comes with the following specs: - Allwinner H728 SoC: 8 Arm Cortex-A55 cores, Mali-G57 MC1 GPU - 2 or 4GiB DDR3L DRAM - 32, 64, or 128 GiB eMMC flash - AXP717 + AXP323 PMICs - Gigabit Ethernet (using MAXIO PHY) - HDMI port - 2 * USB 2.0 ports - 1 * USB 3.0 port - microSD card slot - TOSLINK digital audio output - 3.5mm A/V port - infrared sensor - 7-segment display - 5V barrel plug power supply - power button The PCB provides holes for soldering a UART header or cable, this is connected to the debug UART0. There is another set of UART pins available. The board also features a FEL button (accessible through the 3.5mm socket) and a reset button (only accessible when case is open). This .dts just describes the basic peripherals as far as we support them at the moment. The PMIC rail assignments are reverse engineered as far as possible, by dumping them from a running Android system, and correlating them to other boards using the same SoC. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://patch.msgid.link/[email protected] [[email protected]: Squash in SD card detect pull resistor fix] Link: https://patch.msgid.link/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: 4ee87d875071390b4e24ce46dbdd792216d61651 ] (cherry picked from commit 693da0a03149b77a3e2bc11cfd314df8cc2fab40)
2025-07-27arm64: dts: allwinner: Add Allwinner A523 .dtsi fileAndre Przywara
The Allwinner A523, and its siblings A527 and T527, which share the same die, are a new family of SoCs introduced in 2023. They features eight Arm Cortex-A55 cores, and, among the other usual peripherals, a PCIe and USB 3.0 controller. Add the basic SoC devicetree .dtsi for the chip, describing the fundamental peripherals: the cores, GIC, timer, RTC, CCU and pinctrl. Also some other peripherals are fully compatible with previous IP, so add the USB and MMC nodes as well. The other peripherals will be added in the future, once we understand their compatibility and DT requirements. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Jernej Skrabec <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: 35ac96f796649346c9b0440413dc6c5138249b3e ] (cherry picked from commit 247a3572abcfd7a0d48e12f8f810f1cbae5ce4f4)
2025-06-24arm64: dts: allwinner: h616: add YuzukiHD Chameleon supportAndre Przywara
The Chameleon board is an OpenHardware devboard made by YuzukiTsuru. The form factor resembles the Raspberry Pi Model A boards, though it differs significantly in its features: - Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache, 1.4 GHz) - between 512MiB and 2GiB DDR3 DRAM - up to 128 GiB eMMC flash - AXP313a PMIC - 100 Mbit/s Ethernet pins on a header - XR829 WIFI+Bluetooth chip - 4 * USB 2.0 USB-C ports - microSD card slot - 3.5mm A/V port Add the devicetree describing the board's peripherals and their connections. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: f4a6b0f7200f8629f4138f1094ce654ab75df41e ] (cherry picked from commit 3a879d878553d57057ce0a7096bfbf1eb077f6dc)
2025-06-24arm64: dts: allwinner: a100: add Liontron H-A133L board supportAndre Przywara
The H-A133L board is an industrial development board made by Liontron. It contains a number of dedicated JST connectors, to connect external peripherals. It features: - Allwinner A133 SoC (4 * Arm Cortex-A53 cores at up to 1.6 GHz) - 1 GiB, 2 GiB or 4 GiB of LPDDR4 DRAM - between 16 and 128 GiB eMMC flash - AXP707 PMIC (compatible to AXP803) - 100 Mbit/s RJ45 Ethernet socket, using an JLSemi JL1101 PHY - XR829 WIFI+Bluetooth chip - 2 * USB 2.0 USB-A ports, plus three sets of USB pins on connectors (connected via a USB hub connected to USB1 on the SoC) - microSD card slot - 3.5mm A/V port - 12V power supply - connectors for an LVDS or MIPI-DSI panel Add the devicetree describing the board's peripherals and their connections. Despite being a devboard, the manufacturer does not publish a schematic (I asked), so the PMIC rail assignments were bases on BSP dumps, educated guesses and some experimentation. Dropping the always-on property from any of the rails carrying it will make the board hang as soon as the kernel turns off unused regulators. Signed-off-by: Andre Przywara <[email protected]> Link: https://patch.msgid.link/[email protected] [[email protected]: fix property in &usbphy; fix comment typo in &usb_otg] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: a3cd12acb7b74d9b243cd893209972fc657d0bd3 ] (cherry picked from commit 4062957c0797752dcf8b71f99c7aa47301c70aac)
2025-06-24arm64: dts: allwinner: a100: set maximum MMC frequencyAndre Przywara
The manual for the Allwinner A133 SoC mentions that the maximum supported MMC frequency is 150 MHz, for all of the MMC devices. Describe that in the DT entry, to help drivers setting the right interface frequency. Fixes: fcfbb8d9ec58 ("arm64: allwinner: a100: Add MMC related nodes") Signed-off-by: Andre Przywara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: d8f10550448b03d3c5c6d9392119205c65ebfc89 ] (cherry picked from commit 85e37e6a8a002eb231df8209478d7ff2b134a451)
2025-05-27Subtree merge tag 'v6.15-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git Signed-off-by: Tom Rini <[email protected]>
2025-04-02Subtree merge tag 'v6.14-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git
2025-01-26Subtree merge tag 'v6.13-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git [rockchip fixes from Jonas Karlman via IRC]
2024-12-24Subtree merge tag 'v6.12-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git Based on what "git diff" suggests, rename a device tree for imx8mm_venice_defconfig and imx8mp_venice_defconfig Signed-off-by: Tom Rini <[email protected]> --- Cc: Tim Harvey <[email protected]>
2024-10-10arm64: dts: allwinner: h616: Add r_i2c pinctrl nodesChris Morgan
Add pinctrl nodes for the r_i2c node. Without the pinmux defined the r_i2c bus may fail to work, possibly if the bootloader uses rsb mode for the PMIC. Fixes: 0d17c8651188 ("arm64: dts: allwinner: Add Allwinner H616 .dtsi file") Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Chris Morgan <[email protected]> Fixes: 0d17c8651188 ("arm64: dts: allwinner: Add Allwinner H616 .dtsi file") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: 7c9ea4ab76176f65f4f55aa144f9145a4bccaacb ] (cherry-picked from commit 1665557aa57c2140d014d68dfe1a1f92f9baac82) Reviewed-by: Andre Przywara <[email protected]>
2024-10-10arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2cChris Morgan
Change the Anbernic RG35XX series to use the r_i2c bus for the PMIC instead of the r_rsb bus. This is to keep the device tree consistent as there are at least 3 devices (the RG35XX-SP, RG28XX, and RG40XX-H) that have an external RTC on the r_i2c bus. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Tested-by: Ryan Walklin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]> [ upstream commit: c712e5d0985628b1df13930489b49b740e610a2b ] (cherry picked from commit 43c3a035746af3c8cad5b65055d88f1de8406823) Reviewed-by-by: Andre Przywara <[email protected]>
2024-10-01Subtree merge tag 'v6.11-dts' of dts repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git
2024-07-20Subtree merge tag 'v6.10-dts' of devicetree-rebasing repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/
2024-05-20Subtree merge tag 'v6.9-dts' of devicetree-rebasing repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/ Tested-by: Heiko Stuebner <[email protected]> # rk3588-rock5b, rk3588-jaguar, # rk3588-tiger (pending patch)
2024-04-01Subtree merge tag 'v6.8-dts' of devicetree-rebasing repo [1] into dts/upstreamTom Rini
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git/
2024-02-29Merge commit '53633a893a06bd5a0c807287d9cc29337806eaf7' as 'dts/upstream'Tom Rini
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-20 07:55:31 +0000