| Age | Commit message (Collapse) | Author |
|---|
|
David Lechner <[email protected]> says:
This is a series adding support for reading U-Boot env directly from
SCSI devices that do not have a partition table, similar to how we can
already do this for MMC devices.
The motivation behind this is that MediaTek's BSP is already using the
same disk images for both MMC and UFS devices, so we need to be able to
read the env from SCSI devices without requiring a partition UUID.
The series starts with cleaning up a few oddities we noticed in the
existing code. Then some refactoring so that the env code manages
calling scsi_scan() so that we don't have to duplicate that for the
new code path. Then finally, the last few patches add and document the
new functionality.
Link: https://lore.kernel.org/r/[email protected]
|
|
Expand the Kconfig help for ENV_IS_IN_SCSI to explain the other
required config options when this option is enabled.
Signed-off-by: David Lechner <[email protected]>
|
|
Add CONFIG_ENV_SCSI_HW_PARTITION and supporting code to allow loading
the environment directly from a SCSI device without a partition table.
Some platforms store the environment directly on the SCSI device without
a way to look it up by partition UUID.
Signed-off-by: David Lechner <[email protected]>
|
|
Rename SCSI_ENV_PART_UUID to ENV_SCSI_PART_UUID. All other environment-
related config names are of the form ENV_<name>, so this is more
consistent.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
|
|
The SPL_SAVEENV functionality, when working with an MMC device, can only
work with SPL_MMC_WRITE enabled. This however only works with SPL_MMC
also being enabled. Update the dependencies to show that if we have
enabled SPL_ENV_IS_IN_MMC then we select SPL_MMC_WRITE and make
SPL_ENV_IS_IN_MMC depends on SPL_MMC.
Signed-off-by: Tom Rini <[email protected]>
|
|
In order to have ENV_IS_IN_NAND be valid we must have MTD_RAW_NAND
enabled as a minimum, express this dependency in Kconfig.
Signed-off-by: Tom Rini <[email protected]>
|
|
TARGET namespace is for machines / boards / what-have-you that
building U-Boot for. Simply replace from TARGET to ARCH
make things more clear and proper for ALL SoCFPGA.
Signed-off-by: Brian Sune <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
# Conflicts:
# drivers/ddr/altera/Makefile
|
|
Add support for converting single-copy environment to redundant environment.
In case CRC checks on both redundant environment copies fail, try one more
CRC check on the primary environment copy and treat it as single environment.
If that check does pass, rewrite the single-copy environment into redundant
environment format, indicate the environment is valid, and import that as
usual primary copy of redundant environment. Follow up 'env save' will then
store two environment copies and the system will continue to operate as
regular redundant environment system.
Add test which validates this upgrade path. The test starts with spi.bin
which is pre-populated as single-copy environment and then upgrades that
environment to dual-copy environment.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Falcon mode uses falcon_image_file from the env during mmc fs boot, but
external env can be compromised. Therefore disable access to external
env by setting SPL_ENV_IS_NOWHERE when SPL_OS_BOOT_SECURE is set.
Signed-off-by: Anshul Dalal <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
%s/environemt/environment
Signed-off-by: Thomas Bonnefille <[email protected]>
|
|
Since commit 5fb88fa725 "env: Rename SYS_REDUNDAND_ENVIRONMENT to ENV_REDUNDANT"
the option SYS_REDUNDAND_ENVIRONMENT is no longer available and should be
renamed to ENV_REDUNDANT.
Fixes: 95f03ee65c0e ("env: mmc: fix offsets relative to the end of the partition")
Signed-off-by: Heiko Thiery <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
As part of renaming environment related Kconfig options,
ENV_MMC_SW_PARTITION was inadvertently changed from a string to a bool.
Correct this.
Fixes: ffc4914703a2 ("env: Rename ENV_MMC_PARTITION to ENV_MMC_SW_PARTITION")
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
In order to set the BOOTFILE symbol we first need to have USE_BOOTFILE
be set, or some of the logic might not work as expected later on when
building. Second, defaults like this belong with the symbol itself.
Fixes: da595d236b97 ("include: configs: soc64: Use CONFIG_SPL_ATF to differentiate bootfile")
Signed-off-by: Tom Rini <[email protected]>
|
|
We have a few options that we cannot enable in a "allyesconfig" type
build because we cannot use zero as a default value.
- The logic around HAS_BOARD_SIZE_LIMIT assumes that if we have set this
then we compare with it. Similarly, we need to set SPL_NO_BSS_LIMIT as
the default there.
- Both SYS_CUSTOM_LDSCRIPT and ENV_USE_DEFAULT_ENV_TEXT_FILE then prompt
for a file name to use.
- The SYS_I2C_SOFT driver is a legacy driver which requires a lot of
configuration within the board config. file instead, so disable it.
Signed-off-by: Tom Rini <[email protected]>
|
|
According to the help text, you can set negative offsets to indicated
that the offset is relative to the end of the parition. But kconfig
doesn't let you specify negative hex values. I think this fell through
the cracks when converting the symbol from a '#define' to a kconfig
option.
Introduce a new boolean kconfig option to switch on the "relative to the
end" behavior.
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
There are no users of DELAY_ENVIRONMENT and the same effect can
be achieved either using DT /config/load-environment property,
or by using ENV_IS_NOWHERE . Remove this configuration option
and matching functionality.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Also rename USE_DEFAULT_ENV_FILE to USE_ENV_DEFAULT_ENV_TEXT_FILE .
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_SW_PARTITION to clarify this is the SD/MMC software
partition table entry selector. Update the help text accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_EMMC_HW_PARTITION to clarify this is the eMMC hardware
partition selector, not a software partition table entry selector.
Retain the ENV_MMC_ prefix to make it easier to search for all the
SD/MMC related ENV options. Update the help text accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Varadarajan Narayanan <[email protected]> says:
The qcs9100 based Ride platforms have UFS as their primary storage.
Hence add support to U-Boot env framework to be able to save and
retrieve the environment from UFS. The environment will be
saved/retrieved from the partition specified in the config option
CONFIG_SCSI_ENV_PART.
Also add an API to convert partition UUID string to block device
descriptor for UFS. This API will be used to get the block device
descriptor for the partition specified in CONFIG_SCSI_ENV_PART.
Link: https://lore.kernel.org/r/[email protected]
|
|
Allow SCSI to be able to store environment variables.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Acked-by: Casey Connolly <[email protected]>
|
|
1. As this is for MTD-based devices, the Kconfig dependency should be MTD
instead of only spi-nor flashes
2. Initialize saved_buf to avoid crash on free()
3. Remaining size should be set correctly to write_size
Fixes: 03fb08d4aef (env: Introduce support for MTD)
Signed-off-by: Weijie Gao <[email protected]>
Reviewed-by: Christian Marangi <[email protected]>
|
|
Introduce support for env in generic MTD. Currently we only support SPI
flash based on the lagacy sf cmd that assume SPI flash are always NOR.
This is not the case as to SPI controller also NAND can be attached.
To support also these flash scenario, add support for storing and
reading ENV from generic MTD device by adding an env driver that
base entirely on the MTD api.
Introduce a new kconfig CONFIG_ENV_IS_IN_MTD and
CONFIG_ENV_MTD_DEV to define the name of the MTD device as exposed
by mtd list.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).
Enable ENV_FAT_DEVICE_AND_PART="0:auto" for Versal Gen 2 platform.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Replace Maximumm with Maximum in Kconfig symbol description, fix a typo.
No functional change.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Michal Simek <[email protected]>
|
|
Switch the callback static list from the board configuration variable
CFG_ENV_CALLBACK_LIST_STATIC to Kconfig CONFIG_ENV_CALLBACK_LIST_STATIC.
Signed-off-by: Christoph Niedermaier <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
When enabling CONFIG_ENV_IS_IN_EXT4 the environment might be stored on
an mmc device similar to the CONFIG_ENV_IS_IN_FAT case.
Fixes: 7d080773347c ("Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add support for AMD Versal Gen 2. SoC is based on Cortex-a78ae 4 cluster/2
cpu core each. A lot of IPs are shared with previous families. There are
couple of new IP blocks where the most interesting from user point of view
is UFS.
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/bc2b70831ce1031bd0fac32357bff84936e1310f.1716994063.git.michal.simek@amd.com
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
With the migration to Kconfig complete, we can now add some previously
missing dependencies to some commands.
Signed-off-by: Tom Rini <[email protected]>
|
|
Enable saving variables to MMC(FAT) and SPI based on primary
bootmode. If bootmode is JTAG, dont save env anywhere(NOWHERE).
Enable ENV_FAT_DEVICE_AND_PART="0:auto" for versal-net platform as well.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
In order for our environment to be present on SPI flash we need to
depend not on the symbol for a SPI controller but rather that SPI flash
of some sort is present. Update the dependencies.
Signed-off-by: Tom Rini <[email protected]>
|
|
When reading Kconfig help messages to understand ENV_OFFSET and
ENV_OFFSET_REDUND, developers may not realise that they need to also
look at the chosen ENV_IS_IN_* options to see how the offsets will be
interpreted.
Signed-off-by: Paul Barker <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
PPA was a secure firmware developed in-house which is no longer
supported and replaced by TF-A quite some years ago. Drop support
for it.
Signed-off-by: Laurentiu Tudor <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
It is not a parse error to have a default value of "0" for a "hex" type
entry, instead of "0x0". However, "0" and "0x0" are not treated the
same even by the tools themselves. Correct this by changing the default
value from "0" to "0x0" for all hex type questions that had the
incorrect default. Fix one instance (in two configs) of a default of "0"
being used on a hex question to be "0x0". Remove the cases where a
defconfig had set a value of "0x0" to be used as the default had been
"0".
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The new opt-out setting, CONFIG_ENV_MMC_PARTITION, statically sets
the MMC environment partition name. Prior to this patch, the only way
to declare this partition name was by creating a
'u-boot,mmc-env-partition' parameter in the device-tree's /config node.
This setting provides additional flexibility, particularly in cases
where accessing the device-tree is not straightforward (e.g. QEMU).
If undeclared, the device-tree's setting will be used.
Signed-off-by: Emmanuel Di Fede <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Patrick Delaunay <[email protected]>
|
|
Avoid error messages when SPL,TPL,VPL build don't
have the environment options of the main build.
This is needed when defined(CONFIG_ENV_IS_IN_xxx) is changed
to CONFIG_IS_ENABLED(ENV_IS_IN_xxx).
Signed-off-by: Troy Kisky <[email protected]>
|
|
Add an option to put the VPL environment nowhere (not in storage).
Signed-off-by: Simon Glass <[email protected]>
|
|
This completes what 890feecaab72 started by selecting ENV_APPEND and
loading the default env before any other sources. This ensures that load
operations pick up all non-writable vars from the default env and only
permitted parts from other locations according to the regular
priorities.
With this change, boards only need to define the list of writable
variables but no longer have to provide a custom env_get_location
implementation.
CC: Joe Hershberger <[email protected]>
CC: Marek Vasut <[email protected]>
CC: Stefan Herbrechtsmeier <[email protected]>
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
Add a new config CONFIG_ENV_MMC_USE_DT to force configuration of the
U-Boot environment offset with device tree config node.
This patch avoids issues when several CONFIG_ENV_IS_IN_XXX are activated,
the defconfig file uses the same value for CONFIG_ENV_OFFSET or
CONFIG_ENV_OFFSET_REDUND for the several ENV backends (SPI_FLASH, EEPROM
NAND, SATA, MMC).
After this patch a bad offset value is not possible when the selected
partition in device tree is not found.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_OVERWRITE_ETHADDR_ONCE
Signed-off-by: Tom Rini <[email protected]>
|
|
This functionality is currently unused, and has not been migrated to
using DM_I2C, even. Drop this.
Signed-off-by: Tom Rini <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_GATEWAYIP
CONFIG_HOSTNAME
CONFIG_IPADDR
CONFIG_NETMASK
CONFIG_ROOTPATH
CONFIG_SERVERIP
CONFIG_UBOOTPATH
To do this, we introduce a CONFIG_USE_ form of each of the above and
change include/env_default.h to test for that to be set before setting a
value. Further, we don't want to stringify the IP address related values
as they are now properly strings via Kconfig.
Signed-off-by: Tom Rini <[email protected]>
|
|
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
