| Age | Commit message (Collapse) | Author |
|---|
|
The A/B update strategy of the env's has a gap in the first 2 calls of saveenv.
The env's are stored twice on the first memory area if:
gd->env_valid == ENV_INVALID.
u-boot=> saveenv
Saving Environment to MMC... Writing to MMC(1)... OK
u-boot=> saveenv
Saving Environment to MMC... Writing to MMC(1)... OK <-- !!!
u-boot=> saveenv
Saving Environment to MMC... Writing to redundant MMC(1)... OK
u-boot=> saveenv
Saving Environment to MMC... Writing to MMC(1)... OK
This is the same issue as resolved in commit e589d5822cac ("env: spi:
Fix gd->env_valid for the first write")
Signed-off-by: Michael Glembotzki <[email protected]>
Signed-off-by: Jasper Orschulko <[email protected]>
Signed-off-by: Michael Heimpold <[email protected]>
[trini: Amend the commit message]
---
Changes in v2:
- Rebase to current master
- Amend the commit message to reference the SPI version of this fix,
which had significant follow-up discussion.
|
|
According to the help text, you can set negative offsets to indicated
that the offset is relative to the end of the parition. But kconfig
doesn't let you specify negative hex values. I think this fell through
the cracks when converting the symbol from a '#define' to a kconfig
option.
Introduce a new boolean kconfig option to switch on the "relative to the
end" behavior.
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_SW_PARTITION to clarify this is the SD/MMC software
partition table entry selector. Update the help text accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_EMMC_HW_PARTITION to clarify this is the eMMC hardware
partition selector, not a software partition table entry selector.
Retain the ENV_MMC_ prefix to make it easier to search for all the
SD/MMC related ENV options. Update the help text accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
The symbol "ENV_IS_EMBEDDED" is an environment internal define and not a
real CONFIG symbol. The IS_ENABLED() macro is still valid to use here,
so update the check.
Signed-off-by: Tom Rini <[email protected]>
|
|
Rename the variants of env_mmc_load() for redundant and non-redundant
environment to env_mmc_load_redundant() and env_mmc_load_singular()
respectively and convert the env_mmc_load() implementation to use of
if (IS_ENABLED(...)). As a result, drop __maybe_unused from
mmc_env_is_redundant_in_both_boot_hwparts().
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
Introduce a new function mmc_env_is_redundant_in_both_boot_hwparts()
which replaces IS_ENABLED(ENV_MMC_HWPART_REDUND) and internally does
almost the same check as the macro which assigned ENV_MMC_HWPART_REDUND
did, and call it in place of IS_ENABLED(ENV_MMC_HWPART_REDUND).
The difference compared to IS_ENABLED(ENV_MMC_HWPART_REDUND) is
in the last conditional, which does not do plain macro compare
(CONFIG_ENV_OFFSET == CONFIG_ENV_OFFSET_REDUND), but instead does
mmc_offset(mmc, 0) == mmc_offset(mmc, 1). If OF_CONTROL is not
in use, this gets optimized back to original macro compare, but
if OF_CONTROL is in use, this also takes into account the DT
properties u-boot,mmc-env-offset and u-boot,mmc-env-offset-redundant.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Simon Glass <[email protected]> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
|
|
Complete this rename for all directories outside arch/ board/ drivers/
and include/
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
partitions
Having two separate partitions for use in a redundant environment
setup works just fine, if one only relies on setting CONFIG_ENV_OFFSET
and CONFIG_ENV_OFFSET_REDUND. However, if CONFIG_PARTITION_TYPE_GUID
is enabled, the current logic in mmc_env_partition_by_guid() means
that only the first partition will ever be considered, and prior to
the previous commit, lead to silent data corruption.
Extend the logic so that, when we are looking for the location for the
second copy of the environment, we keep track of whether we have
already found one matching partition. If a second match is found,
return that, but also modify *copy so that the logic in the caller
will use the last ENV_SIZE bytes of that second partition - in my
case, and I suppose that would be typical, both partitions have been
created with a size of exactly the desired ENV_SIZE.
When only a single matching partition exists, the behaviour is
unchanged: We return that single partition, and *copy is left as-is,
so the logic in the caller will either use the last (copy==0) or
second-to-last (copy==1) ENV_SIZE bytes.
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
I have an GPT layout containing two partitions with the type GUID for
U-Boot environment:
partition U-Boot-env-1 {
offset = 0x1fc000
size = 0x2000
partition-type-uuid = "3de21764-95bd-54bd-a5c3-4abe786f38a8"
}
partition U-Boot-env-2 {
offset = 0x1fe000
size = 0x2000
partition-type-uuid = "3de21764-95bd-54bd-a5c3-4abe786f38a8"
}
and have set CONFIG_ENV_OFFSET=0x1fc000,
CONFIG_ENV_OFFSET_REDUND=0x1fe000 and CCONFIG_ENV_SIZE=0x2000.
This usually works just fine, but on an stm32mp, I was seeing weird
behaviour. It turns out that can be tracked down to that board setting
CONFIG_PARTITION_TYPE_GUID, so the logic in mmc.c ends up only finding
the first of the two partitions, but then in the copy=1 case ends up
computing 0x1fa000 as the *val returned (that is, the end of the
partition minus two times the environment size). That is of course
outside the found partition and leads to random corruption of the
partition preceding U-Boot-env-1.
Add a sanity check that the partition found is at least as large as
needed for the "one or two copies from the end of the partition" logic
to at least produce something within that partition. That will also
catch a bug where the partition is too small for even one copy of the
environment.
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
In preparation for fixing the handling of a the case of redundant
environment defined in two separate partitions with the U-Boot env
GUID, refactor the
for ()
if (str)
...
#ifdef CONFIG_FOO
if (!str)
..
#endif
to
if (str)
for ()
else if (CONFIG_FOO && !str)
for ()
and put those for loops in separate functions.
No functional change intended, but I did change the direct access of
info.type_guid into using the disk_partition_type_guid() helper, so
that I could avoid the #ifdef and use IS_ENABLED() in the if() statement.
Signed-off-by: Rasmus Villemoes <[email protected]>
|
|
When CONFIG_SYS_MMC_ENV_PART=2, the environment is loaded from
the USER partition (hwpart=0) instead of from the
BOOT1 partition (hwpart=2).
IS_ENABLED() cannot be used for non-boolean KConfig options.
Its documentation states:
> * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y',
> * 0 otherwise.
So in our case, IS_ENABLED(CONFIG_SYS_MMC_ENV_PART) evaluates to 0.
Because of this, the hwpart variable is never assigned and mmc_offset()
ends up switching back to the USER hwpart (0) instead of BOOT1 (2).
Fix it by using #define instead.
Tested with:
# have CONFIG_SYS_MMC_ENV_PART=2 in defconfig
# 1. Erase mmc0boot1
=> mmc dev 0 2
=> mmc erase 0 400
=> mmc read ${loadaddr} 0 400
=> md ${loadaddr} 4
82000000: 00000000 00000000 00000000 00000000 ................
# 2. Restore default environment and save to MMC
=> env default -a -f
=> saveenv
# 3. Read back mmc0boot1 and confirm the env is present
=> mmc read ${loadaddr} 0 400
=> md ${loadaddr} 4
82000000: 13e0632e 72646461 7469665f 3978303d .c..addr_fit=0x9
Fixes: 5b4acb0ff79d ("env: mmc: Apply GPT only on eMMC user HW partition")
Signed-off-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from all "env/" files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
This prints the MMC device being read similar to how we print the MMC
device we write to when e.g. calling saveenv.
One of the side effects is that the boot log now shows from which MMC
device the env was loaded:
Loading Environment from MMC... Reading from MMC(1)... OK
This is useful to identify which MMC device the environment was loaded
from for boards where there are more than one (e.g. eMMC and SD card)
without adding some debug messages manually.
Sadly, there's no way to know which of the default or redundant
environment is being read from env_mmc_load before env_import_redund is
called so it is printing a bit later (and possibly after error/warning
messages).
Cc: Quentin Schulz <[email protected]>
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Dragan Simic <[email protected]>
|
|
The declaration of U_BOOT_ENV_LOCATION() uses a different #ifdef
condition from the code it calls. Use the same condition to avoid a
build warning if CONFIG_CMD_SAVEENV is disabled.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The new opt-out setting, CONFIG_ENV_MMC_PARTITION, statically sets
the MMC environment partition name. Prior to this patch, the only way
to declare this partition name was by creating a
'u-boot,mmc-env-partition' parameter in the device-tree's /config node.
This setting provides additional flexibility, particularly in cases
where accessing the device-tree is not straightforward (e.g. QEMU).
If undeclared, the device-tree's setting will be used.
Signed-off-by: Emmanuel Di Fede <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Patrick Delaunay <[email protected]>
|
|
Apply the GPT U-Boot environment GUID type look up only on eMMC user
HW partition, do not apply the look up on eMMC boot HW partitions as
mmc_offset_try_partition() assumes either SD partitions or eMMC user
HW partition.
This fixes environment operation on systems where CONFIG_SYS_MMC_ENV_PART
is non-zero and CONFIG_SYS_REDUNDAND_ENVIRONMENT is set.
Fixes: 80105d8fd52 ("env: mmc: select GPT env partition by type guid")
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Fix the issue in commit 46c9016 ("env: mcc: Drop unnecessary #ifdefs")
If CONFIG_SYS_REDUNDAND_ENVIRONMENT is not defined, the offset value
becomes undetermined, so write env to unexpected offset.
Signed-off-by: Ye Li <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]>
|
|
Remove the unused macro STR(X) since the commit 2b2f727500dc ("env: mmc:
allow support of mmc_get_env_dev with OF_CONTROL")
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Add a debug message to indicate a potential issue when
"u-boot,mmc-env-partition" is present in config node of device tree
but this partition name is not found in the mmc device.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Since commit c0364ce1c695 ("doc/README.gpt: define partition type GUID for
U-Boot environment"), a specific type GUID can be used to indicate
the U-Boot environment partition on the device with GPT partition table.
This patch uses this type GUID to found the env partition as fallback
when the partition name property "u-boot,mmc-env-partition" is not present
in config node or if the indicated partition name is not found.
The mmc_offset_try_partition() function is reused, it selects the first
partition with the correct type GUID when the parameter 'str' is NULL.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Add a new config CONFIG_ENV_MMC_USE_DT to force configuration of the
U-Boot environment offset with device tree config node.
This patch avoids issues when several CONFIG_ENV_IS_IN_XXX are activated,
the defconfig file uses the same value for CONFIG_ENV_OFFSET or
CONFIG_ENV_OFFSET_REDUND for the several ENV backends (SPI_FLASH, EEPROM
NAND, SATA, MMC).
After this patch a bad offset value is not possible when the selected
partition in device tree is not found.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
When ENV_IS_EMBEDDED is enabled, ret is not defined but is used as a
return value in env_mmc_load().
This patch correct this issue and simplify the existing code, test only
one time #if defined(ENV_IS_EMBEDDED) and not in the function.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
This file has a lot of conditional code and much of it is unnecessary.
Clean this up to reduce the number of build combinations.
This patch replaces the test on CONFIG_ENV_OFFSET_REDUND for the
more coherent CONFIG_SYS_REDUNDAND_ENVIRONMENT.
This patch also corrects a compilation issue in init_mmc_for_env()
when CONFIG_SYS_MMC_ENV_PART is not activated, env_mmc_orig_hwpart is
not defined.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Introduce ENV_MMC_OFFSET defines.
It is a preliminary step to the next patches to simplify the code.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
We currently have an if_type (interface type) and a uclass id. These are
closely related and we don't need to have both.
Drop the if_type values and use the uclass ones instead.
Maintain the existing, subtle, one-way conversion between UCLASS_USB and
UCLASS_MASS_STORAGE for now, and add a comment.
Signed-off-by: Simon Glass <[email protected]>
|
|
On eMMC device, the erase_grp_size > 1 so the address and size for the
erase block command in env/mmc.c can be unaligned on erase group size and
some strange trace occurs and the result is not guarantee by MMC devices.
The SD-Card behavior doesn't change as erase_grp_size = 1 for SD-Card.
For example, on eMMC present on STM32MP15C-EV1 and before the patch:
STM32MP> env erase
Erasing Environment on MMC...
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x2000~0x27ff
16 blocks erased: OK
Caution! Your devices Erase group is 0x400
The erase range would be change to 0x2000~0x23ff
16 blocks erased: OK
OK
After this patch:
STM32MP> env erase
Erasing Environment on MMC...
1024 blocks erased at 0x2000: OK
1024 blocks erased at 0x2000: OK
OK
Here the 2 copies of U-Boot environment are in the same devices Erase
group: it is erased twice.
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Currently the MMC environment driver supports storing redundant environment
only in one eMMC partition at different offsets. This is sub-optimal, since
if this one boot partition is erased, both copies of environment are lost.
Since the eMMC has two boot partitions, add support for storing one copy of
environment in each of the two boot partitions.
To enable this functionality, select CONFIG_SYS_REDUNDAND_ENVIRONMENT to
indicate redundant environment should be used. Set CONFIG_SYS_MMC_ENV_PART
to 1 to indicate environment should be stored in eMMC boot partition. Set
CONFIG_ENV_OFFSET equal to CONFIG_ENV_OFFSET_REDUND, and both to the offset
from start of eMMC boot partition where the environment should be located.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
If the environment is stored in eMMC hardware boot partition, the environment
driver first stores the currently selected eMMC boot partition, then does the
requested operation, and then restores the original boot partition settings.
In case the environment operation fails, the boot partition settings are also
restored.
The 'env erase' implementation in the MMC environment driver lacks the path
which restores the boot partition. This could lead to various failure modes,
like the system boots the wrong copy of bootloader etc. Fix this by filling
in the missing restoration path.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Jaehoon Chung <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Stefano Babic <[email protected]>
|
|
The current API is outdated as it requires a devicetree pointer.
Move these functions to use the ofnode API and update this globally. Add
some tests while we are here.
Correct the call in exynos_dsim_config_parse_dt() which is obviously
wrong.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add ENV_ERASE_PTR macro to handle erase opts and remove the associated
ifdef.
This patch is a extension of previous commit 82b2f4135719 ("env_internal.h:
add alternative ENV_SAVE_PTR macro").
Signed-off-by: Patrick Delaunay <[email protected]>
|
|
Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.
Signed-off-by: Simon Glass <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
The function mmc_offset_try_partition searches the MMC partition for
locating environment data, by comparing the partition names with config
"u-boot,mmc-env-parition". However, it only compares the first word-size
bytes (size of 'const char *'), which may make the function to find
unintended partition.
Correct the function not to partially compare the partition name with
config "u-boot,mmc-env-partition".
Fixes: c9e87ba66540 ("env: Save environment at the end of an MMC partition")
Signed-off-by: Hoyeonjiki Kim <[email protected]>
Reviewed-by: Wolfgang Denk <[email protected]>
|
|
Since it's so trivial I could just about tolerate this when there were only
two copies of it. But now there are about to be three.
Signed-off-by: David Woodhouse <[email protected]>
|
|
This converts the following to Kconfig:
CONFIG_SYS_MMC_ENV_DEV
CONFIG_SYS_MMC_ENV_PART
Note that with this conversion we now have consistent behavior with
respect to ensuring that we have always selected the correct MMC
device and hardware partition.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add another custom environment flag which discerns environment coming
from external storage from environment set by U-Boot itself.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
|
|
Manage 2 copy at the end of the partition selected by config
"u-boot,mmc-env-partition" to save the U-Boot environment,
with CONFIG_ENV_SIZE and 2*CONFIG_ENV_SIZE offset.
This patch allows to support redundancy (CONFIG_ENV_OFFSET_REDUND).
Signed-off-by: Patrick Delaunay <[email protected]>
|
|
The output of the function mmc_offset_try_partition must be a
byte offset in mmc and not a multiple of blksz.
This function is used in mmc_offset(), called by mmc_get_env_addr()
and the offset is used in write_env(), erase_env() and read_env().
In these function, blk_start = offset / mmc->read_bl_len
or /write_bl_len so this offset is not a multiple of blksz.
Signed-off-by: Patrick Delaunay <[email protected]>
|
|
Use the weak function mmc_get_env_dev in mmc_offset_try_partition
function to allow dynamic selection of mmc device to use
and no more use directly the define CONFIG_SYS_MMC_ENV_DEV.
Signed-off-by: Patrick Delaunay <[email protected]>
|
|
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.
Signed-off-by: Simon Glass <[email protected]>
|
|
Make sure the gd struct is up-to-date.
Signed-off-by: Pankit Garg <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
|
|
- In ARMv8 NXP Layerscape platforms we also need to make use of
CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so.
- On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define
to 0.
- Add Kconfig entry for ENV_ADDR.
- Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it.
- Add ENV_xxx_REDUND options that depend on their primary option and
SYS_REDUNDAND_ENVIRONMENT
- On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR
for the pre-main-U-Boot environment location.
- On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but
rather it being non-zero, as it will now be zero by default.
- Rework the env_offset absolute in env/embedded.o to not use
CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within
ENV_IS_IN_FLASH.
- Migrate all platforms.
Cc: Wolfgang Denk <[email protected]>
Cc: Joe Hershberger <[email protected]>
Cc: Patrick Delaunay <[email protected]>
Cc: [email protected]
Signed-off-by: Tom Rini <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
Reviewed-by: Simon Goldschmidt <[email protected]>
|
|
We have CONFIG_ENV_SIZE_IS_REDUND but don't really use it. We have one
board where we can simply multiple CONFIG_ENV_SIZE by two for the same
result. The other place where we could but were not previously using
this is for where env_internal.h checks for if we should set
ENV_IS_EMBEDDED. This seems like the most likely use, historically, of
the variable, but it was not used. Add logic to check for this now.
Cc: Wolfgang Denk <[email protected]>
Cc: Joe Hershberger <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
|
|
This file contains lots of internal details about the environment. Most
code can include env.h instead, calling the functions there as needed.
Rename this file and add a comment at the top to indicate its internal
nature.
Signed-off-by: Simon Glass <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
Reviewed-by: Simon Goldschmidt <[email protected]>
[trini: Fixup apalis-tk1.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
Move these functions to the new header file and rename set_default_env()
to env_set_default() so that it has a consistent env_ prefix.
Acked-by: Joe Hershberger <[email protected]>
Signed-off-by: Simon Glass <[email protected]>
|
