summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2020-07-10Merge tag 'dm-pull-10jul20' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm of-platdata: better phandle and compatible-string support patman support for Python3 on Ubuntu 14.04 new checkpatch check to avoid #ifdefs
2020-07-10powerpc: move ADDR_MAP to KconfigMarek Szyprowski
Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2020-07-09sandbox: make RAM size configurableHeinrich Schuchardt
Up to now the RAM size of the sandbox is hard coded as 128 MiB. This does not allow testing the correct handling of addresses outside the 32bit range. 128 MiB is also rather small when tracing functions where the trace is written to RAM. Provide configuration variable CONFIG_SANDBOX_RAM_SIZE_MB to set the RAM size in MiB. It defaults to 128 MiB with a minimum of 64 MiB. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-07-09arm: kirkwood: switch LaCie boards to sata_mv driverSimon Guinot
This patch switches the SATA driver from mvsata_ide to sata_mv for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-07-09arm: mvebu: helios4: sync helios4 config to clearfog and dts to kernelDennis Gilmore
The helios4 is built on the same microsom as the clearfog, by syncing the config we enable the same featureset that exists in the som on the helios4. The current config does not boot as some of the clearfog changes needed to be made on the helios4 also, generally speaking most changes for the clearfog should also be made on the helios4. Signed-off-by: Dennis Gilmore <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2020-07-07Merge tag 'u-boot-rockchip-20200708' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - dts sync from kernel for rk3399 boards; - Add Radxa Rock Pi N8, N10; - Some feature update for Pinebook Pro;
2020-07-07arm: vexpress64: Fix counter frequencyAndre Przywara
The arch timer on 64-bit Arm Ltd. platforms is driven by a 24 MHz crystal oscillator, so the frequency is not 25165824 MHz, as the current code suggests. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Linus Walleij <[email protected]>
2020-07-07arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCsAmit Singh Tomar
Now that, we calculate SDRAM size by reading DDR registers, "CONFIG_SYS_SDRAM_SIZE" is no more needed. This commit removes "CONFIG_SYS_SDRAM_SIZE" from common configuration file. Signed-off-by: Amit Singh Tomar <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]>
2020-07-07stm32mp1: use the command env info in env_checkPatrick Delaunay
Activate CMD_NVEDIT_INFO and use the new command "env info -d -p -q" to automatically save the environment on first boot. This patch allows to remove the env_default variable. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-07-07configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mpPatrick Delaunay
In the boot command used in ST boards, bootcmd_stm32mp, only support the SD card as second stage, where is found the bootfs with DISTRO. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2020-07-07rockchip: Pinebook Pro: Fix SPI flash and store env on itPeter Robinson
Some minor fixes for SPI flash on the Pinebook Pro and also default to saving environment to the SPI flash as it's guaranteed to be on board. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]> (applied with make savedefconfig) Signed-off-by: Kever Yang <[email protected]>
2020-07-07rockchip: Pinebook Pro: Fix USB and the USB attached keyboardPeter Robinson
The built in keyboard on the Pinebook Pro is attached via USB so fix this up to ensure USB works as expected. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-07-01riscv: Add Sipeed Maix supportSean Anderson
The Sipeed Maix series is a collection of boards built around the RISC-V Kendryte K210 processor. This processor contains several peripherals to accelerate neural network processing and other "ai" tasks. This includes a "KPU" neural network processor, an audio processor supporting beamforming reception, and a digital video port supporting capture and output at VGA resolution. Other peripherals include 8M of sram (accessible with and without caching); remappable pins, including 40 GPIOs; AES, FFT, and SHA256 accelerators; a DMA controller; and I2C, I2S, and SPI controllers. Maix peripherals vary, but include spi flash; on-board usb-serial bridges; ports for cameras, displays, and sd cards; and ESP32 chips. Currently, only the Sipeed Maix Bit V2.0 (bitm) is supported, but the boards are fairly similar. Documentation for Maix boards is located at <http://dl.sipeed.com/MAIX/HDK/>. Documentation for the Kendryte K210 is located at <https://kendryte.com/downloads/>. However, hardware details are rather lacking, so most technical reference has been taken from the standalone sdk located at <https://github.com/kendryte/kendryte-standalone-sdk>. Signed-off-by: Sean Anderson <[email protected]>
2020-06-30Merge tag 'mips-pull-2020-06-29' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips into next - net: pcnet: cleanup and add DM support - Makefile: add rule to build an endian-swapped U-Boot image used by MIPS Malta EL variants - CI: add Qemu tests for MIPS Malta
2020-06-30kconfig: mmc: move pxa_mmc_generic to kconfigMarcel Ziswiler
Move CONFIG_PXA_MMC_GENERIC to Kconfig. Signed-off-by: Marcel Ziswiler <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2020-06-29net: pcnet: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <[email protected]> Cc: Daniel Schwierzeck <[email protected]> Cc: Joe Hershberger <[email protected]>
2020-06-29net: pcnet: Drop PCNET_HAS_PROMMarek Vasut
All of one PCNET users has this option set, make this default and drop this config option. Signed-off-by: Marek Vasut <[email protected]> Cc: Daniel Schwierzeck <[email protected]> Cc: Joe Hershberger <[email protected]>
2020-06-29spi: Move DM_SPI_FLASH and SPI_FLASH_DATAFLASH to Kconfig (for ls1021aXXX)Lukasz Majewski
This patch moves the CONFIG_DM_SPI_FLASH and CONFIG_SPI_FLASH_DATAFLASH to be defined in Kconfig, not in board specific header file (include/configs/<board>.h). Before this change the CONFIG_DM_SPI_FLASH was not set in .config (so it was not possible to use CONFIG_IS_ENABLED(DM_SPI_FLASH) in SPI DM/DTS converted drivers), but it was set in u-boot.cfg file. Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]>
2020-06-29spi: Move DM_SPI_FLASH to Kconfig (for NXP's ls1043a)Lukasz Majewski
This patch fixes issue with defining the DM_SPI_FLASH in the configs/include/<board.h> instead of enabling this option in Kconfig. The problem is that CONFIG_IS_ENABLED(DM_SPI_FLASH) shows false as there is no DM_SPI_FLASH=y in .config (but the define is set in u-boot.cfg). As a result conversion of DM_SPI_FLASH to using CONFIG_IS_ENABLED() is not working properly. Signed-off-by: Lukasz Majewski <[email protected]> Signed-off-by: Hou Zhiqiang <[email protected]>
2020-06-29Convert CONFIG_CADENCE_QSPI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CADENCE_QSPI Signed-off-by: Tom Rini <[email protected]>
2020-06-27rk3399: Add BOOTENV_SF commandJagan Teki
Add missing BOOTENV_SF command in rk3399 config. Fix it. Fixes: f263b860acf8 ("rk3399: Enable SF distro bootcmd") Signed-off-by: Jagan Teki <[email protected]> Reported-by: Suniel Mahesh <[email protected]> Tested-by: Suniel Mahesh <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-06-26Kconfig: Remove CONFIG_CLOCKS_IN_MHZTom Rini
This variable is unset anywhere and only unset on a number of platforms. Remove all relevant code. Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BOOTM_NETBSD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTM_NETBSD Signed-off-by: Tom Rini <[email protected]>
2020-06-26arm: imx: Finish migration of CONFIG_CSF_SIZE to KconfigTom Rini
While in most cases CSF_SIZE is handled via Kconfig we have some i.MX8M platforms that set the size based on the now-renamed CONFIG_SECURE_BOOT symbol. Update things so that CSF_SIZE itself depends on IMX_HAB being enabled and provide the default value for i.MX8M family of parts. Cc: Stefano Babic <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Ye Li <[email protected]> Cc: NXP i.MX U-Boot Team <[email protected]> Fixes: d714a75fd4dc ("imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HAB") Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Stefano Babic <[email protected]> Reviewed-by: Ye Li <[email protected]>
2020-06-26nxp: Finish switch to CONFIG_NXP_ESBCTom Rini
There are two remaining users of the CONFIG_SECURE_BOOT symbol that have not been migrated to another symbol. In this case, they should be using CONFIG_NXP_ESBC as their guard. Cc: Vladimir Oltean <[email protected]> Fixes: 5536c3c9d0d1 ("freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name") Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_CONSOLE_SCROLL_LINES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONSOLE_SCROLL_LINES Signed-off-by: Tom Rini <[email protected]>
2020-06-26arm: toradex: Convert CONFIG_CONSOLE_MUX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONSOLE_MUX Cc: Igor Opaniuk <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Igor Opaniuk <[email protected]>
2020-06-26Convert CONFIG_CONS_INDEX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CONS_INDEX Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_CMDLINE_EDITING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMDLINE_EDITING Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BUILD_TARGET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BUILD_TARGET Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BOUNCE_BUFFER to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOUNCE_BUFFER Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BOOTP_DNS2 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTP_DNS2 CONFIG_BOOTP_PXE_CLIENTARCH Signed-off-by: Tom Rini <[email protected]>
2020-06-26arm: abb secu1: Convert CONFIG_BOOTDELAY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTDELAY Cc: Holger Brunck <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2020-06-26arm: capricorn: Convert CONFIG_BOOTCOUNT_ENV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTCOUNT_ENV CONFIG_BOOTCOUNT_LIMIT Cc: Anatolij Gustschin <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BOARD_TYPES to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_TYPES Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BCH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BOOTARGS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOOTARGS Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_EARLY_INIT_R Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_BAUDRATE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BAUDRATE Signed-off-by: Tom Rini <[email protected]>
2020-06-26bk4r1: Re-convert CONFIG_AUTOBOOT_PROMPT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_STOP_STR Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_ATMEL_USART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_USART Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_ATMEL_NAND_HW_PMECC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_NAND_HW_PMECC CONFIG_ATMEL_NAND_HWECC CONFIG_NAND_ATMEL CONFIG_PMECC_CAP CONFIG_PMECC_SECTOR_SIZE Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_ATMEL_HLCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ATMEL_HLCD Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_AT91_GPIO to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AT91_GPIO Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_ARM_PL180_MMCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARM_PL180_MMCI Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_ARCH_MISC_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Tom Rini <[email protected]>
2020-06-26Convert CONFIG_AM335X_LCD to KconfigTom Rini
This converts the following to Kconfig: CONFIG_AM335X_LCD Signed-off-by: Tom Rini <[email protected]>
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24arm64: zynqmp: Reduce console buffer sizeT Karthik Reddy
Reduce console buffer size to 1kbyte to accommodate memory allocations in mini u-boot for zynqmp. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-06-24arm: versal: Fix xspi0 boot modeMichal Simek
Use proper number to be aligned with xspi0 boot mode. Signed-off-by: Michal Simek <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-28 08:30:03 +0000