summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2021-04-08imx8mp_evk: add/cleanup variable for distroPeng Fan
Add fdt_addr_r fdtfile which used by distro boot Clean up environment Signed-off-by: Peng Fan <[email protected]>
2021-04-08imx8mm_evk: add/cleanup variable for distroPeng Fan
Add fdt_addr_r fdtfile which used by distro boot Clean up environment Signed-off-by: Peng Fan <[email protected]>
2021-04-06Merge tag 'dm-pull-6apr21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
ENOSYS clean-up Minor dtoc improvements Convert CONFIG_MISC_INIT_F to Kconfig Allow unit tests to run on any board pylibfdt build-rule fix
2021-04-06Convert CONFIG_MISC_INIT_F to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_MISC_INIT_F Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-04-05Merge tag 'rockchip-for-v2021.07' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3368 lion board support; - Fix px30 odroid-go2 board support; - Add rk3399 NanoPi R4s and NanoPi M4B board support;
2021-04-05Merge branch 'next'Tom Rini
2021-04-05imx8mn_ddr4_evk: Allow booting the kernel by defaultFabio Estevam
Currently it is not possible to boot Linux from the SD card by default. Make the necessary adjustments to allow it. Reported-by: Peter Bergin <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Andrey Zhizhikin <[email protected]> # imx8mn_ddr4_evk Reviewed-by: Peng Fan <[email protected]>
2021-03-30include: configs: rk3399: drop a dangling commentPeter Robinson
Drop a irrelevent comment now the related configs have moved to the various config files. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2021-03-30rockchip: rk3368: set CONFIG_SYS_BOOTM_LEN to 64MBHeiko Stuebner
Mimicing for example the rk3399, set the SYS_BOOTM_LEN to 64MB so that regular kernel images can get loaded without problems. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2021-03-30rockchip: rk3368: adjust CONFIG_SYS_LOAD_ADDRHeiko Stuebner
CONFIG_SYS_LOAD_ADDR currently is at 0x00280000 which is only 512KB behind the area where we load u-boot to, which depending on u-boot size may overlap at some point. So for safety just pick the same value rk3399 has and set CONFIG_SYS_LOAD_ADDR to 0x00800800 on rk3368 as well. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2021-03-29Merge tag 'v2021.04-rc5' into nextTom Rini
Prepare v2021.04-rc5
2021-03-27x86: coral: Put the eMMC firstSimon Glass
At present the eMMC device does not have an alias so it appears after the SD card which is device 1. There is no device 0 which is odd. Make the eMMC device be the first one. Update the boot script to use the new device. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-03-23configs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigKuldeep Singh
LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines present in header. Move these entries from header to defconfigs. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-23configs: lx2160a: Remove unused Flexspi config optionsKuldeep Singh
It is now safe to remove Flexspi configs NXP_FSPI_FLASH_SIZE and NXP_FSPI_FLASH_NUM options from headers as they are no longer used by driver anymore. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-20board: Add MT8183 pumpkin board supportFabien Parent
Add the MT8183 pumpkin board support. Signed-off-by: Fabien Parent <[email protected]>
2021-03-20configs: mt8516: use bootcmd from config_distro_bootcmd.hFabien Parent
Instead of redefining our own way to boot, let's just use config_distro_bootcmd.h. Signed-off-by: Fabien Parent <[email protected]>
2021-03-20board: mediatek: rename pumpkin board into mt8516Fabien Parent
More than one pumpkin board has been made with different MediaTek SoCs. Rename the pumpkin board to follow the naming convention of all other MediaTek boards and also to not be confusing when other pumpkin boards will be added in follow-up commits. Signed-off-by: Fabien Parent <[email protected]>
2021-03-16arm: rmobile: Add Silicon Linux EK874 board supportLad Prabhakar
The EK874 development kit from Silicon Linux is made of CAT874 (the main board) and CAT875 (the sub board that goes on top of CAT874). This patch adds the required board support to boot Si-Linux EK874 board based on R8A774C0 SoC. DTS files apart from r8a774c0-ek874-u-boot.dts and r8a774c0-u-boot.dtsi have been imported from Linux kernel 5.11 commit f40ddce88593 ("Linux 5.11"). Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]>
2021-03-16arm: rmobile: Add HopeRun HiHope RZ/G2M board supportBiju Das
The HiHope RZ/G2M board from HopeRun consists of main board (HopeRun HiHope RZ/G2M main board) and sub board(HopeRun HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board. This patch adds the required board support to boot HopeRun HiHope RZ/G2M board. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]>
2021-03-15Merge tag 'v2021.04-rc4' into nextTom Rini
Prepare v2021.04-rc4
2021-03-15Merge tag 'ti-v2021.04-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-ti - Fix boot for da850-evm and omap3_logic - Optimize SPL size for am65x boards
2021-03-15Merge tag 'u-boot-stm32-20210312' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver - stm32mp1_trusted_defconfig rely on SCMI support - Remove the nand MTD configuration for NOR boot in stm32mp1 board - STM32programmer update - Bsec: manage clock when present in device tree - stm32mp15: move bootdelay configuration in defconfig - Update for stm32 dsi and dw_mipi_dsi - STM32 MCU's cleanup - Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags - Update stm32mp1 doc
2021-03-15include: configs: am65x_evm: Optimize size of SPL BSSLokesh Vutla
Current BSS allocation of SPL is as below: $ size spl/u-boot-spl text data bss dec hex filename 132369 7852 1496 141717 22995 spl/u-boot-spl But 20KB is allocated currently for BSS. Reduce it to 3KB and save some space for stack. Signed-off-by: Lokesh Vutla <[email protected]>
2021-03-15ARM: da850-evm: Fix boot issues from missing SPL_PAD_TOAdam Ford
In a previous attempt to unify config options and remove items from the whitelist file, SPL items were moved into a section enabled with CONFIG_SPL_BUILD. Unfortunately, SPL_PAD_TO is referenced at the head Makefile and uses this define to create padding of the output file. When it was moved to CONFIG_SPL_BUILD, it caused boot errors with devices that are not booting from NOR. Fix the boot issues by moving SPL_PAD_TO out so it's always. Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig") Signed-off-by: Adam Ford <[email protected]>
2021-03-11configs: stm32mp15: move bootdelay configuration in defconfigPatrick Delaunay
The STM32MP15 boards have no reason to configure bootdelay in stm32mp1.h as it is already done with CONFIG_BOOTDELAY (default = 2) and in include/env_default.h. This patch allows configuration for customers which reuse stm32mp1.h and reduce the size of the default environment. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2021-03-08Merge tag 'u-boot-amlogic-20210308' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - button: adc: fix treshold typo - configs: meson64: add fdtoverlay_addr_r
2021-03-08configs: meson64: add fdtoverlay_addr_rNeil Armstrong
In order to support loading FTD Overlays when booting with the pxe command (or extlinux.conf), supported with [1], add the missing fdtoverlay_addr_r used to load the overlay before applying it to the FDT loaded at fdt_addr_r. [1] https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ Signed-off-by: Neil Armstrong <[email protected]>
2021-03-08Makefile: socfpga: Add target to generate hex output for combined spl and dtbDalon Westergreen
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream for Intel SOCFPGA SOC64 devices. Signed-off-by: Dalon Westergreen <[email protected]> Signed-off-by: Siew Chin Lim <[email protected]>
2021-03-08configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfigSiew Chin Lim
CONFIG_BOOTCOMMAND have been moved to Kconfig.boot. This patch move the CONFIG_BOOTCOMMAND macro from socfpga_soc64_common.h to *_defconfig file for both Stratix 10 and Agilex. Signed-off-by: Siew Chin Lim <[email protected]>
2021-03-05ppc: qemu: Drop a custom env variable 'fdt_addr_r'Bin Meng
Now that we have switched to CONFIG_OF_CONTROL, and we can use the env variable 'fdtcontroladdr' directly instead of creating one that is duplicated. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Enable RTC support via I2CBin Meng
The QEMU ppce500 target integrates a Freescale I2C controller and has a Pericom pt7c4338 RTC connected to it. Enable corresponding DM drivers so that 'date' command is actually useful. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Switch over to use DM ETH and PCIBin Meng
At present the board supports non-DM version PCI and E1000 drivers. Switch over to use DM ETH and PCI by: - Rewrite the PCI address map functions using DM APIs - Enable CONFIG_MISC_INIT_R to do the PCI initialization and address map - Drop unnecessary ad-hoc config macros - Remove board_eth_init() in the board codes Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Switch over to use DM serialBin Meng
The QEMU ppce500 target integrates 2 NS16550 serial ports. Switch over to use the DM version of the driver by: - drop unnecessary ad-hoc config macros - add get_serial_clock() in the board codes Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Fix CONFIG_SYS_PCI_MAP_ENDBin Meng
CONFIG_SYS_PCI_MAP_END currently points to 0xe8000000, which means the upper end of the virtual address mapped to PCI bus address ends at 0xe8000000. But this is wrong as the CCSBAR was already mapped at 0xe0000000 with a 1 MiB size. Fixes: fa08d3951777 ("PPC 85xx: Add qemu-ppce500 machine") Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05configs: fsl: move via specific defines to KconfigRajesh Bhagat
Moves below via specific defines to Kconfig: CONFIG_FSL_VIA Signed-off-by: Rajesh Bhagat <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-03-05arm: fsl: common: Improve NXP VID driver PMBus supportStephen Carlson
This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <[email protected]> Signed-off-by: Wasim Khan <[email protected]> Tested-by: Wasim Khan <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-03-03Merge tag 'u-boot-imx-20210303' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2021.04 ---------------- - new boards: - i.MX8MN Beacon EmbeddedWorks (2GB) - Gateworks Venice imx8mm - convert to DM: - imx53-qsb, mx53loco, mx51evk, mx23-evk - Fixes : - Network : FEC ethernet quirks - DH dh-imx6 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
2021-03-03board: gateworks: imx8mm: Add Gateworks Venice board supportTim Harvey
Add initial support for Gateworks Venice product family based on the i.MX 8M Mini SoC Signed-off-by: Tim Harvey <[email protected]>
2021-03-03video: sunxi_display: Convert to DM_VIDEOJagan Teki
DM_VIDEO migration deadline is already expired, but around 80 Allwinner boards are still using video in a legacy way: ===================== WARNING ====================== This board does not use CONFIG_DM_VIDEO Please update the board to use CONFIG_DM_VIDEO before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Convert the legacy video driver over to the DM_VIDEO framework. This is a minimal conversion: it doesn't use the DT for finding its resources, nor does it use DM clocks or DM devices for the outputs (LCD, HDMI, CVBS). Tested in Bananapi M1+ Plus 1920x1200 HDMI out. (Jagan) Signed-off-by: Jagan Teki <[email protected]> [Andre: rebase and smaller fixes] Signed-off-by: Andre Przywara <[email protected]> Acked-by: Maxime Ripard <[email protected]> Reviewed-by: Jernej Skrabec <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2021-03-03Nokia RX-51: Enable usbtty serial console by defaultPali Rohár
Now when usbtty serial console is fixed in U-Boot enable CONFIG_USB_TTY for Nokia RX-51 board by default. Fix also USB product id as U-Boot ignores CONFIG_USBD_PRODUCTID macro and include U-Boot string into USB product name to indicate usage of U-Boot. CONFIG_CONSOLE_MUX is already used and U-Boot console is available for all in/out devices. Therefore there is no need to have separate commands 'run sercon', 'run usbcon' and 'run vgacon', so remove them. As space for U-Boot is limited to 256kB, enable CONFIG_OPTIMIZE_INLINING and disable some other unused options so CONFIG_USB_TTY can be enabled. Nokia RX-51 does not have easily accessible UART serial console so the only option for easy debugging is to use device's keyboard+screen or this usbtty serial console over USB. Signed-off-by: Pali Rohár <[email protected]> Reviewed-by: Lukasz Majewski <[email protected]> Acked-by: Pavel Machek <[email protected]>
2021-03-01imx: Add 2GB lpddr support for i.MX8MN Beacon EmbeddedWorks devkit.Adam Ford
There is a second lpddr configuration with 2GB of RAM, but this requires different RAM timings, so in addition to adding the timing file, a separate defconfig is necessary. Signed-off-by: Adam Ford <[email protected]>
2021-03-01mx51evk: Convert to driver modelFabio Estevam
Make the conversion to driver model as it is mandatory. Tested booting the Linux kernel from the SD card. Signed-off-by: Fabio Estevam <[email protected]>
2021-03-01mx53loco: Convert to driver modelFabio Estevam
Make the conversion to driver model as it is mandatory. Remove the SATA support for now as the i.MX53 support has not been added yet. Signed-off-by: Fabio Estevam <[email protected]>
2021-03-01board: toradex: move RGMII delays to PHY sideOleksandr Suvorov
The RGMII link delays can be set on either MAC or PHY side. Set the rgmii-id PHY mode for FEC and remove FEC_ENET_ENABLE_.XC_DELAY setting, so that these definitions aren't used anymore throughout the U-Boot. Signed-off-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2021-03-01ARM: imx8: Add missing FEC ENET quirk for i.MX8/i.MX8XOleksandr Suvorov
Both NXP SoCs i.MX8 and i.MX8X have ENET gigabit MAC. Define FEC_QUIRK_ENET_MAC for the imx8 platform and remove this definition from configs of boards, based on MX8/MX8X. Signed-off-by: Oleksandr Suvorov <[email protected]> Acked-by: Marek Vasut <[email protected]> Reviewed-By: Ramon Fried <[email protected]> Acked-by: Oliver Graute <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2021-03-01ARM: imx6: mx6sabre-common: Search for boot components in /boot tooMarek Vasut
Some root filesystem configurations do not have separate /boot partition, but rather place kernel, DT, scripts into /boot directory. Search the /boot directory for these boot components in case they are not found in /, which is the old behavior. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Ye Li <[email protected]> Cc: uboot-imx <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2021-03-01ARM: imx6: mx6sabre-common: Replace fatload with FS_GENERIC loadMarek Vasut
Replace filesystem specific fatload command with a filesystem agnostic load command, so the board can boot from e.g. ext4 too. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Peng Fan <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Ye Li <[email protected]> Cc: uboot-imx <[email protected]> Reviewed-by: Peng Fan <[email protected]>
2021-02-27ARM: imx6: dh-imx6: Drop the SF hunk in configMarek Vasut
There is now CONFIG_SPL_DM_SPI{,_FLASH}, however keeping CONFIG_DM_SPI{,_FLASH} enabled in SPL seems to grow the SPL by a couple of bytes: text data bss dec hex filename - 34069 1568 96 35733 8b95 spl/u-boot-spl + 34075 1568 96 35739 8b9b spl/u-boot-spl In either case, the binary is bootable, so remove the part in board config. Signed-off-by: Marek Vasut <[email protected]> Cc: Andreas Geisreiter <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Ludwig Zenz <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Tom Rini <[email protected]>
2021-02-27ARM: imx: Revert "dh_imx6: Switch to full DM-aware"Marek Vasut
This reverts commit 03a673cf49e ("dh_imx6: Switch to full DM-aware"). According to discussion [1], the patch is known to break the dh_imx6 board, however it made it upstream just before 2021.01-rc4, likely by mistake. Revert this patch to put the board back into working order. Also note that this board has no DM SPL support due to OCRAM size limitations, but that is fine, as SPL DM support is optional. [1] https://lists.denx.de/pipermail/u-boot/2020-June/417986.html Signed-off-by: Marek Vasut <[email protected]> Cc: Andreas Geisreiter <[email protected]> Cc: Jagan Teki <[email protected]> Cc: Ludwig Zenz <[email protected]> Cc: Stefano Babic <[email protected]> Cc: Tom Rini <[email protected]>
2021-02-26ARM: stm32: Add USB host boot supportMarek Vasut
Add support for booting from USB pen drive, since USB host port is available on the STM32MP1. Signed-off-by: Marek Vasut <[email protected]> Cc: Patrice Chotard <[email protected]> Cc: Patrick Delaunay <[email protected]> Reviewed-by: Patrick Delaunay <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-29 12:57:54 +0000