summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2021-11-12Convert CONFIG_MD5 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MD5 Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_MX6 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MX6 CONFIG_MX7 Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_IMX_BOOTAUX et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_IMX_BOOTAUX CONFIG_IMX_THERMAL Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_SYS_PROMPT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_PROMPT CONFIG_SYS_PROMPT_HUSH_PS2 Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_I2C_EDID et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_PHY_ATHEROS CONFIG_PHY_GIGE CONFIG_MII Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_MISC_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MISC_INIT_F CONFIG_MISC_INIT_R Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_TRACE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_TRACE CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY CONFIG_TRACE_EARLY_ADDR CONFIG_TRACE_EARLY_SIZE Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_SYS_CONSOLE_IS_IN_ENV to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH CONFIG_ENV_IS_NOWHERE CONFIG_ENV_OFFSET CONFIG_ENV_OVERWRITE CONFIG_ENV_SECT_SIZE CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_FSL_USDHC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_USDHC Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_FSL_LAYERSCAPE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_LAYERSCAPE Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_BITBANGMII to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BITBANGMII Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_DOS_PARTITION to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DOS_PARTITION Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_E1000 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_E1000 Signed-off-by: Tom Rini <[email protected]>
2021-11-12Convert CONFIG_ARCH_CPU_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ARCH_CPU_INIT Signed-off-by: Tom Rini <[email protected]>
2021-11-11Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- device-tree sync-up with Linux for ls1028a - fixes/update in fsl-ddr driver, fsl-validate, lx2162a, fsl-mc, spintable code, configs, qspi node, pci - enable EFI_SET_TIME support in sl28 - powerpc: Drop -mstring
2021-11-10Merge tag 'u-boot-stm32-20211110' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <[email protected]> Signed-off-by: Patrick Delaunay <[email protected]>
2021-11-10board: stmp32mp1: split board and SOC STM32MP15 configurationPatrick Delaunay
Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2021-11-09Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini
[trini: Migrate CONFIG_EXYNOS7420 as part of merging, so espresso7420 still builds] Signed-off-by: Tom Rini <[email protected]>
2021-11-09configs: fsl: migrate FMAN/QE specific defines to KconfigRajesh Bhagat
Use moveconfig.py script to convert CONFIG_SYS_FMAN_FW_ADDR, CONFIG_SYS_QE_FW_ADDR and CONFIG_SYS_QE_FMAN_FW_LENGTH to Kconfig and move these entries to defconfigs. Signed-off-by: Rajesh Bhagat <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-11-09configs: ls1046aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigsKuldeep Singh
LS1046A-QDS has CONFIG_SPI_FLASH_SST, CONFIG_SPI_FLASH_EON and CONFIG_SPI_FLASH_STMICRO defines present in header. Move these entries from header to defconfigs. Signed-off-by: Kuldeep Singh <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-11-09board: sl28: enable EFI UpdateCapsule supportMichael Walle
Enable support for update over EFI UpdateCapsule mechanism. This board doesn't support setting EFI variables after ExitBootservices(). Therefore, we are also enabling EFI_IGNORE_OSINDICATIONS. Signed-off-by: Michael Walle <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-11-09lx2162a : Rename emmc boot command variableMeenakshi Aggarwal
Rename emmc_bootcmd environment variable to sd2_bootcmd to fix emmc boot on lx2162aqds board. Signed-off-by: Meenakshi Aggarwal <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-11-07efi: Add video support to the appSimon Glass
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2021-11-05Convert CONFIG_BOARD_EARLY_INIT_F et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F CONFIG_BOARD_LATE_INIT CONFIG_DISPLAY_BOARDINFO CONFIG_DISPLAY_BOARDINFO_LATE Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SPL_DRIVERS_MISC et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SPL_DRIVERS_MISC CONFIG_SPL_ENV_SUPPORT CONFIG_SPL_GPIO CONFIG_SPL_I2C CONFIG_SPL_LDSCRIPT CONFIG_SPL_LIBCOMMON_SUPPORT CONFIG_SPL_LIBGENERIC_SUPPORT CONFIG_SPL_LOAD_FIT_ADDRESS CONFIG_SPL_MMC CONFIG_SPL_NAND_SUPPORT CONFIG_SPL_NO_CPU_SUPPORT CONFIG_SPL_OS_BOOT CONFIG_SPL_POWER CONFIG_SPL_STACK_R CONFIG_SPL_STACK_R_ADDR CONFIG_SPL_WATCHDOG CONFIG_SPL_TEXT_BASE Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_BMP_16BPP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BMP_16BPP Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_OF_EMBED to KconfigTom Rini
This converts the following to Kconfig: CONFIG_OF_EMBED Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2021-11-05Convert CONFIG_MCFUART to KconfigTom Rini
This converts the following to Kconfig: CONFIG_MCFUART Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_FEC_MXC to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FEC_MXC Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SUPPORT_EMMC_BOOT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SYS_TEXT_BASE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_TEXT_BASE Signed-off-by: Tom Rini <[email protected]>
2021-11-05Convert CONFIG_SYS_HZ to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_HZ Signed-off-by: Tom Rini <[email protected]>
2021-10-31SoC: exynos: add support for exynos 78x0Dzmitry Sankouski
Samsung Exynos 7880 \ 7870 - SoC for mainstream smartphones and tablets introduced on March 2017. Features: - 8 Cortex A53 cores - ARM Mali-T830 MP3 GPU - LTE Cat. 7 (7880) or 6 (7870) modem Signed-off-by: Dzmitry Sankouski <[email protected]> Cc: Minkyu Kang <[email protected]>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <[email protected]> Cc: Ramon Fried <[email protected]> Cc: Tom Rini <[email protected]>
2021-10-31SoC: qcom: add support for SDM845Dzmitry Sankouski
Hi-end qualcomm chip, introduced in late 2017. Mostly used in flagship phones and tablets of 2018. Features: - arm64 arch - total of 8 Kryo 385 Gold / Silver cores - Hexagon 685 DSP - Adreno 630 GPU Tested only as second-stage bootloader. Signed-off-by: Dzmitry Sankouski <[email protected]> Cc: Ramon Fried <[email protected]> Cc: Tom Rini <[email protected]> Cc: Stephan Gerhold <[email protected]>
2021-10-31arm: apple: Add initial support for Apple's M1 SoCMark Kettenis
Add support for Apple's M1 SoC that is used in "Apple Silicon" Macs. This builds a basic U-Boot that can be used as a payload for the m1n1 boot loader being developed by the Asahi Linux project. Signed-off-by: Mark Kettenis <[email protected]> Reviewed-by: Simon Glass <[email protected]> [trini: Add MAINTAINERS entry]
2021-10-25Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
- Add and enable watchdog driver - Prepare for SYSRESET driven AXP poweroff - Prepare for SoCs without MMC2 - Some fixes for extending SPL (SPL-DM for RISC-V) - Some preparations for proper VBUS management - Fix secure monitor move
2021-10-25Merge tag 'u-boot-imx-20211022' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20211022 ------------------- CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561 - i.MX8: - Toradex Verdin (switch to binman, cleanup, etc.) - Phytec phycore_imx8mm (fixes, boot from SPI-NOR) - fixes for imx8mp_evk - doc (i.MX): MX8MM with Fast boot - i.MX6: - Toradex : colibri-imx6ull with eMMC, fixes - i.MX7ULP : - preparation for OPTEE + Serial Number - generic: - imx8m_image: Support ddr3 firmware
2021-10-25sunxi: A23/A33/H3: Actually move the secure monitorSamuel Holland
commit 1ebfc0c631e3 ("sunxi: A23/A33/H3: Move sun8i secure monitor to SRAM A2") attempted to move the secure monitor to SRAM A2. But not all sun8i SoCs have SRAM A2, so a check was put in for SUNXI_SRAM_A2_SIZE to avoid breaking the other SoCs. However, because the header providing SUNXI_SRAM_A2_SIZE was not included, this unintentionally skipped the new definitions on all SoCs. Fix this by including the right header. Fixes: 1ebfc0c631e3 ("sunxi: A23/A33/H3: Move sun8i secure monitor to SRAM A2") Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Signed-off-by: Andre Przywara <[email protected]>
2021-10-21imx8mp_evk: Delete noncached memory configYe Li
DWC EQOS driver has removed to use noncached memory, so delete the configuration from iMX8MP EVK head file. Signed-off-by: Ye Li <[email protected]>
2021-10-21Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <[email protected]>
2021-10-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Turris MOX and Omnia changes, mostly moving to Kconfig (Marek) - a37xx: pci: Misc smaller fixes (Pali) - cmd: tlv_eeprom: Fix building with DEBUG enabled (Sven) - termios_linux.h: Fix tcsendbreak() implementation (Pali) - mvebu: Add missing "if SPL" (Tom)
2021-10-21arm: mvebu: turris_omnia: Move CONFIG_SPL_DRIVERS_MISC to KconfigMarek Behún
Instead of declaring CONFIG_SPL_DRIVERS_MISC in board config header, select it in Kconfig. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-10-21arm: mvebu: turris_omnia: Move SPL's SYS_MALLOC_SIMPLE to KconfigMarek Behún
Instead of declaring CONFIG_SYS_MALLOC_SIMPLE dependant on CONFIG_SPL_BUILD in board config header, select CONFIG_SPL_SYS_MALLOC_SIMPLE in Kconfig. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-10-21arm: mvebu: turris_mox: Cosmetic update for board config headerMarek Behún
Reorder the definitions in Turris MOX' board config header, drop the comment relics from when this file was copied, fix indentation. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-10-21arm: kirkwood, mvebu: Remove CONFIG_SYS_RESET_ADDRESS optionMarek Behún
This option is not used anywhere. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-10-21arm: mvebu: a3720: Create Kconfig option for I2C_MVMarek Behún
Move the config option CONFIG_I2C_MV to a Kconfig option CONFIG_SYS_I2C_MV and move the default definition from config header files into defconfigs. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-29 19:50:42 +0000