summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2023-02-28board: rockchip: add Radxa ROCK5B Rk3588 boardEugen Hristev
ROCK 5B is a Rockchip RK3588 based SBC (Single Board Computer) by Radxa. There are tree variants depending on the DRAM size : 4G, 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 4/8/16GB memory LPDDR4x Mali G610MC4 GPU MIPI CSI 2 multiple lanes connector eMMC module connector uSD slot (up to 128GB) 2x USB 2.0, 2x USB 3.0 2x HDMI output, 1x HDMI input Ethernet port 40-pin IO header including UART, SPI, I2C and 5V DC power in USB PD over USB Type-C Size: 85mm x 54mm Kernel commits: a1d3281450ab ("arm64: dts: rockchip: Add rock-5b board") 6fb13f888f2a ("arm64: dts: rockchip: Update sdhci alias for rock-5b") Signed-off-by: Eugen Hristev <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28rockchip: rk3568: Read cpuid from otpJonas Karlman
The cpuid on RK3568 is located at 0xa instead of 0x7 as all other SoCs. Add and use a CFG_CPUID_OFFSET to define this offset. Signed-off-by: Jonas Karlman <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28board: rockchip: Add Edgeble Neural Compute Module 6Jagan Teki
Neural Compute Module 6(Neu2) is a 96boards SoM-CB compute module based on Rockchip RK3588 from Edgeble AI. General features: - Rockchip RK3588 - up to 32GB LPDDR4x - up to 128GB eMMC - 2x MIPI CSI2 FPC On module WiFi6/BT5 is available in the following Neu6 variants. Neural Compute Module 6(Neu6) IO board is an industrial form factor ready-to-use IO board from Edgeble AI. IO board offers plenty of peripherals and connectivity options and this patch enables basic eMMC and UART which is enough to successfully boot Linux. Neu6 needs to mount on top of this IO board in order to create a complete Edgeble Neural Compute Module 6(Neu6) IO platform. Boot log for the record, DDR Version V1.08 20220617 LPDDR4X, 2112MHz channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB Manufacturer ID:0x6 CH0 RX Vref:31.7%, TX Vref:21.8%,21.8% CH1 RX Vref:30.7%, TX Vref:22.8%,23.8% CH2 RX Vref:30.7%, TX Vref:22.8%,22.8% CH3 RX Vref:30.7%, TX Vref:21.8%,21.8% change to F1: 528MHz change to F2: 1068MHz change to F3: 1560MHz change to F0: 2112MHz out U-Boot SPL 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Trying to boot from MMC1 INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-391-g856309329:derrick.huang NOTICE: BL31: Built : 14:15:50, Jul 18 2022 INFO: ext 32k is not valid INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: system boots from cpu-hwid-0 INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001 INFO: dfs DDR fsp_params[0].freq_mhz= 2112MHz INFO: dfs DDR fsp_params[1].freq_mhz= 528MHz INFO: dfs DDR fsp_params[2].freq_mhz= 1068MHz INFO: dfs DDR fsp_params[3].freq_mhz= 1560MHz INFO: BL31: Initialising Exception Handling Framework INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2023.01-00952-g1d1785a516-dirty (Jan 30 2023 - 19:53:55 +0530) Model: Edgeble Neu6A IO Board DRAM: 7.5 GiB (effective 3.7 GiB) Core: 71 devices, 15 uclasses, devicetree: separate MMC: mmc@fe2c0000: 0 Loading Environment from nowhere... OK In: serial@feb50000 Out: serial@feb50000 Err: serial@feb50000 Model: Edgeble Neu6A IO Board Net: No ethernet found. Hit any key to stop autoboot: 0 => Add support for Edgeble Neu6 Model A IO Board. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-28arm: rockchip: Add RK3588 arch core supportJagan Teki
The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4, HDMI Out, HDMI In, DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, USB OTG 3.0, Type-C, USB 2.0, PCIe 3.0, SATA 3, Ethernet, SDIO3.0 I2C, UART, SPI, GPIO and PWM. Add arch core support for it. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Kever Yang <[email protected]>
2023-02-28include: rk3328: Add default env for compressed kernel imagesChristopher Obbard
Add default memory addresses for kernel_comp_addr_r and kernel_comp_size to enable booting from a compressed kernel image. This area is temporarily used to decompress the kernel image on-the-fly. Signed-off-by: Christopher Obbard <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-02-22socfpga: chameleonv3: Move environment to a text filePaweł Anikiel
Move the environment to an easily editable text file in the boot partition Signed-off-by: Paweł Anikiel <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-02-17riscv: Rename Andes cpu and board namesLeo Yu-Chi Liang
The current ae350-related defconfigs could also support newer Andes CPU IP, so modify the names of CPU from ax25 to andesv5, and board name from ax25-ae350 to ae350. Signed-off-by: Leo Yu-Chi Liang <[email protected]> Reviewed-by: Yu Chien Peter Lin <[email protected]> Reviewed-by: Rick Chen <[email protected]>
2023-02-13arm: mvebu: Add support for Synology DS116 (Armada 385)Tony Dinh
Synology DS116 is a NAS based on Marvell Armada 385 SoC. Board Specification: - Marvel MV88F6820 Dual Core at 1.8GHz - 1 GiB DDR3 RAM - 8MB Macronix mx25l6405d SPI flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 1x SATA (6 Gbps) - 3x LED - PIC16F1829 (connected to uart1) - GPIO fan - serial console Note that this patch depends on the add-support for Thecus N2350 patch: https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ Signed-off-by: Tony Dinh <[email protected]>
2023-02-13arm: mvebu: Add support for Thecus N2350 (Armada 385) boardTony Dinh
Thecus N2350 is a NAS based on Marvell Armada 385 SoC. Specification: - Processor: Marvel MV88F6820 Dual Core at 1GHz - 1 GiB DDR4 RAM - 4MB Macronix mx25l3205d SPI flash - 512MB Hynix H27U4G8F2DTR-BC NAND flash - I2C - 2x USB 3.0 - 1x GBE LAN port (PHY: Marvell 88E1510) - 2x SATA (hot swap slots) - 3x buttons - 10x LEDS - serial console Signed-off-by: Tony Dinh <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2023-02-12Merge branch 'for-2023.04' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-mpc8xx - A fix for a long standing bug that has been exposed by commit 50128aeb0f8 ("cyclic: get rid of cyclic_init()") preventing 8xx boards from booting since u-boot 2023.01 - A GPIO driver for powerpc 8xx chip - Fixup for powerpc 8xx SPI driver - A new powerpc 8xx board - The two devices having that board.
2023-02-11board: cssi: Add new board MCR3000_2GChristophe Leroy
This adds a new board from CS GROUP. The board is called MCR3000_2G, and has a CPU board called CMPC885. That CPU board is shared with another equipment that will be added in a later patch. That board stores Ethernet MAC addresses in an EEPROM which is accessed using SPI bus. This patch was originally written by Charles Frey who's email address is not valid anymore as he left the company. Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: FRANJOU Stephane <[email protected]>
2023-02-11board: MCR3000: Modernise the settings to properly work on lastest u-boot ↵Christophe Leroy
version Both U-boot and Linux kernel have grown over the last releases and don't fit anymore in the 2M EPROM of the board. So, rework the setup to allow storing the Linux kernel image on the UBIFS NAND Flash. Also add support to FIT images as this is what the Linux kernel look like nowadays. Also increase CFG_SYS_BOOTMAPSZ to 32Mbytes and define CONFIG_SYS_BOOTM_LEN with the same value, otherwise it defaults to 8M which is not sufficient anymore with nowadays Linux kernels. And set the netmask to 255.255.255.0 as a class C address is used. Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: FRANJOU Stephane <[email protected]>
2023-02-11board: MCR3000: Migrate to using CONFIG_EXTRA_ENV_TEXTChristophe Leroy
We can move all of the environment changes to come from CONFIG_EXTRA_ENV_TEXT. Suggested-by: Tom Rini <[email protected]> Signed-off-by: Christophe Leroy <[email protected]>
2023-02-10board: MCR3000: Use lowercase filenamesChristophe Leroy
Rename MCR3000.* to mcr3000.* to be more in line with other boards. Signed-off-by: Christophe Leroy <[email protected]>
2023-02-10arm: bcm7xxx: Convert to DM_SERIALThomas Fitzsimmons
Remove ns16550 configuration from header files. Document DM_SERIAL-required prior stage device tree configuration.
2023-02-10Correct SPL use of TARGET_MX6UL_9X9_EVKSimon Glass
This converts 1 usage of this option to the non-SPL form, since there is no SPL_TARGET_MX6UL_9X9_EVK defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-10Correct SPL use of IMX8MN_BEACON_2GB_LPDDRSimon Glass
This converts 1 usage of this option to the non-SPL form, since there is no SPL_IMX8MN_BEACON_2GB_LPDDR defined in Kconfig Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Adam Ford <[email protected]>
2023-02-09Correct SPL uses of CMD_USBSimon Glass
This converts 8 usages of this option to the non-SPL form, since there is no SPL_CMD_USB defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-09Correct SPL uses of CMD_SFSimon Glass
This converts 2 usages of this option to the non-SPL form, since there is no SPL_CMD_SF defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-09Correct SPL uses of CMD_SCSISimon Glass
This converts 2 usages of this option to the non-SPL form, since there is no SPL_CMD_SCSI defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-09Correct SPL uses of CMD_NVMESimon Glass
This converts 3 usages of this option to the non-SPL form, since there is no SPL_CMD_NVME defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-09Correct SPL uses of CMD_MMCSimon Glass
This converts 6 usages of this option to the non-SPL form, since there is no SPL_CMD_MMC defined in Kconfig Signed-off-by: Simon Glass <[email protected]>
2023-02-09powerpc/mpc85xx: use board env file for socrates boardHeiko Schocher
as Tom suggested get rid of CFG_EXTRA_ENV_SETTINGS and enable CONFIG_ENV_SOURCE_FILE and use text file board/socrates/socrates.env which contains the default environment. While at it, cleanup the default Environment. Signed-off-by: Heiko Schocher <[email protected]> Suggested-by: Tom Rini <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-02-06arm: qemu: Move GUIDs to the C fileSimon Glass
These are only used in one place, so move them there. Signed-off-by: Simon Glass <[email protected]>
2023-02-06arm: qemu: Switch to a text environmentSimon Glass
Use the new environment format so we can drop most of the config.h file. Signed-off-by: Simon Glass <[email protected]>
2023-02-06arm: qemu: Switch to standard bootSimon Glass
Drop use of the distro scripts and use standard boot instead. Enable BOOTDEV_FULL just for convenience, although this does add quite a bit to the size. Signed-off-by: Simon Glass <[email protected]>
2023-02-06ti: j721e_evm: Add USB to the default boot orderTom Rini
This family of platforms typically has a USB port, and so attempting to boot from it, and making it first, will provide a better overall user experience. Signed-off-by: Tom Rini <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: enable protected EnvironmentHeiko Schocher
enable protected Environment on socrates board. Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: drop second flash bankHeiko Schocher
drop second flash bank, as not used anymore. Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: add initrd_high default environment variableHeiko Schocher
we need to set initrd_high to get fitimage booting. Without, U-Boot drops when booting fitimage: ERROR: Failed to allocate 0x59a0b6 bytes below 0x800000. ramdisk - allocation error bootm - boot application image from memory Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: add MTD partitioning supportHeiko Schocher
setup MTD partitioning through mtdparts variable and set it to: mtdparts=fe0000000.nor:13312k(system1),13312k(system2),5120k(data),128k(env),128k(env-red),768k(u-boot) and pass this to linux per kernel commandline. Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06km/ppc832x: join config filesHolger Brunck
There are no differences for the different 832x targets we have in the header defined with SYS_CONFIG_NAME. So we can join the five headers to a single file. Signed-off-by: Holger Brunck <[email protected]>
2023-02-06km/ppc: remove km-mpc8360.h and km-mpc832x.hHolger Brunck
Next step to get rid of the header files in icnlude/configs. Move most of the defines to km83xx.c directly. Some remaining defines which should go to Kconfig are moved to km-mpc83xx.h for now. Also remove some unused defines and move one define to powerpc.env as we only need it there. Signed-off-by: Holger Brunck <[email protected]>
2023-02-06include: configs: am62x_evm: Add .env file for Am62xNikhil M Jain
Use .env file for setting board related environment variables, in place of am62x_evm.h file. Except for BOOTENV settings, as config_distro_boot.env file doesn't exist. Signed-off-by: Nikhil M Jain <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-02-03udoo_neo: Move to DM for REGULATOR/PMIC/I2C driversPeter Robinson
This moves over the PMIC power init to DM and the associated i2c and regulator bits. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-02-02Merge commit 'refs/pipelines/15015' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-tegra
2023-02-02ARM: tegra: include timer as default optionSvyatoslav Ryhel
Enable TIMER and TEGRA_TIMER for TEGRA_ARMV7_COMMON and TEGRA210. Additionally enable SPL_TIMER if build as SPL part and drop deprecated configs from common header. Signed-off-by: Svyatoslav Ryhel <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom <[email protected]>
2023-02-02Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
2023-02-01Merge tag 'u-boot-imx-20230201' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2023.04 ----------- - several conversion to DM_SERIAL and DM_I2C - fixes for Toradex boards - PSCI CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14965
2023-02-01board: sifive: unmatched: enable booting on a second NVME deviceAurelien Jarno
The HiFive Unmatched board has a M2 slot for NVME and a PCIe slot that can also be used for NVME. Enable support for a second NVME device, so that software RAID-1 configurations can be supported at the u-boot level. Signed-off-by: Aurelien Jarno <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2023-01-31configs: imx8mp_evk: revert to old ram settingsManoj Sai
The 'commit 864ac2cf383e ("board: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit")' has changed the imx8mp evk ram settings from 6GB ram to 2GB. This changeset reverts the above change. Signed-off-by: Manoj Sai <[email protected]> Reported-by : Peter Bergin <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-31Merge tag 'u-boot-amlogic-20230131' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - jethub j100: add rescue boot from microSD - move meson sm command to cmd/meson and add efusedump sub-command - switch dwc2 otg to DM for G12A, GXL & AXG - Add new boards: - Odroid Go Ultra - Odroid-N2L
2023-01-31include/configs: mx6/mx7: drop dangling commentsPeter Robinson
Cleanup some dangling comments left by automated migration processes that are no longer value. Signed-off-by: Peter Robinson <[email protected]> Acked-by: Peng Fan <[email protected]>
2023-01-31pico-imx7d: Convert to DM_I2C and DM_PMICFabio Estevam
The conversion to DM_I2C is mandatory, so convert to it and also to DM_PMIC. Signed-off-by: Fabio Estevam <[email protected]>
2023-01-30imx8mm-phg: Add board supportFabio Estevam
Add the board support for the i.MX8MM Cloos PHG board. This board uses a imx8mm-tqma8mqml SoM from TQ-Group. imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken directly from Linux 6.2-rc3. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-01-30apalis-imx8: add M4 boot environment helpersAndrejs Cainikovs
Add M4 boot environment functions for reference. Signed-off-by: Andrejs Cainikovs <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: update env memory layoutMarcel Ziswiler
Update the distro config env memory layout for the Apalis iMX8 aka QuadMax: - kernel_comp_addr_r=0xf0000000 temporary area for uncompressing (ie FIT images or Image.gz booted using booti) - kernel_comp_size=0x08000000 - loadaddr=0x95400000 avoiding any reserved areas located before that - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script Basic idea of memory layout taken from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout"). However, moved past any reserved areas to avoid any kind of conflicts. Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot). Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: update update_uboot confirmation messageMarcel Ziswiler
Update update_uboot confirmation message. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: drop obsolete environment variablesMarcel Ziswiler
Drop obsolete environment variables fdt_addr, finduuid, boot_file, mmcargs, mmcdev, mmcpart and panel. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Andrejs Cainikovs <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: remove obsolete net usb startMarcel Ziswiler
Remove obsolete net USB start. While at it also add a comment about enabling distro-boot. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-28 22:50:28 +0000