summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2011-09-29powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macrosTimur Tabi
Introduce the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, which contain the high and low portions of CONFIG_SYS_CCSRBAR_PHYS. This is necessary for the assembly-language code that relocates CCSR, since the assembler does not understand 64-bit constants. CONFIG_SYS_CCSRBAR_PHYS is automatically defined from the CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW macros, so it should not be defined in a board header file. Similarly, CONFIG_SYS_CCSRBAR_DEFAULT is defined for each SOC in config_mpc85xx.h, so it should also not be defined in the board header file. CONFIG_SYS_CCSR_DO_NOT_RELOCATE is a "short-cut" macro that guarantees that CONFIG_SYS_CCSRBAR_PHYS is set to the same value as CONFIG_SYS_CCSRBAR_DEFAULT, and so CCSR will not be relocated. Since CONFIG_SYS_CCSRBAR_DEFAULT is locked to a fixed value, multi-stage U-Boot builds (e.g. NAND) are required to relocate CCSR only during the last stage (i.e. the "real" U-Boot). All other stages should define CONFIG_SYS_CCSR_DO_NOT_RELOCATE to ensure that CCSR is not relocated. README is updated with descriptions of all the CONFIG_SYS_CCSRBAR_xxx macros. Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-09-29Blackfin: bf537-stamp/bf548-ezkit: update POST flash block rangeMike Frysinger
Update the define names for the new common code, and improve the range used on the bf548-ezkit. Signed-off-by: Mike Frysinger <[email protected]>
2011-09-29Blackfin: post: generalize led/button tests with GPIOsMike Frysinger
Make it easy for any Blackfin board to enable led/push button tests. Signed-off-by: Mike Frysinger <[email protected]>
2011-09-29Blackfin: post: drop custom test listMike Frysinger
The few tests that are Blackfin-specific have been migrated to common code or been rewritten with the existing "bsp-specific" defines. Signed-off-by: Mike Frysinger <[email protected]>
2011-09-29Blackfin: bf537-stamp: convert to gpio post hotkeyMike Frysinger
No need for our custom implementations now that common code supports the generic gpio layer. Signed-off-by: Mike Frysinger <[email protected]>
2011-09-27ARM: remove broken "ixdp425" and "ixpdg425" boardsAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <[email protected]> Acked-by: Stefan Roese <[email protected]>
2011-09-22Minor Coding Style CleanupWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2011-09-20Drop bogus BOOTFLAG_* definitionsWolfgang Denk
There is no code anywhere that references BOOTFLAG_* so remove these defines. Signed-off-by: Wolfgang Denk <[email protected]> Cc: Heiko Schocher <[email protected]> Cc: Valentin Longchamp <[email protected]> Cc: Peter Tyser <[email protected]>
2011-09-13DA830: Fix Build WarningSandeep Paulraj
This commit fixes a build warning in the DA830 EVM build Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-13omap4: factor out common part from board config headersAneesh V
Factor out common parts from omap4_sdp4430.h and omap4_panda.h into a new file omap4_common.h Signed-off-by: Aneesh V <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-12OMAP3 Beagle: Minor config cleanupSandeep Paulraj
This patch removes a hardcoded MAC address Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-12da830: modify the MEMTEST start and end addressNagabhushana Netagunte
Modify the MEMTEST start and end address. The memtest range was overlapping the CONFIG_SYS_LOAD_ADDR which causes the uImage to be corrupt.Also, modify the size for which mtest is run to 32MB from 16MB. Signed-off-by: Sudhakar Rajashekhara <[email protected]> Signed-off-by: Nagabhushana Netagunte <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-12da830: enable SPI flash boot modeNagabhushana Netagunte
Enable SPI flash boot mode in configuration file as default. With the introduction of 456MHz part, SPI operating frequency will increase and at this frequency SPI does not work correctly. Hence reduce the default SPI speed to 30MHz from 50MHz. Signed-off-by: Sudhakar Rajashekhara <[email protected]> Signed-off-by: Nagabhushana Netagunte <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-12da830: modify the U-Boot prompt stringNagabhushana Netagunte
Modify U-boot promt string from 'DA830-evm >' to 'U-Boot >' as there are many variants of da830 based boards which have diffrent names such as L137, AM1707 etc. Signed-off-by: Sudhakar Rajashekhara <[email protected]> Signed-off-by: Nagabhushana Netagunte <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-12MX25: tx25: Cleanup tx25.h configFabio Estevam
Cleanup tx25.h by removing unnecessary defines and by removing unneeded "1"'s. Signed-off-by: Fabio Estevam <[email protected]>
2011-09-12MX25: tx25: Fix build by making use of GPIO frameworkFabio Estevam
Make use of GPIO framework and avoid the following build error: tx25.c: In function 'tx25_fec_init': tx25.c:73: error: dereferencing pointer to incomplete type tx25.c:74: error: dereferencing pointer to incomplete type tx25.c:75: error: dereferencing pointer to incomplete type tx25.c:76: error: dereferencing pointer to incomplete type tx25.c:83: error: dereferencing pointer to incomplete type tx25.c:84: error: dereferencing pointer to incomplete type tx25.c:114: error: dereferencing pointer to incomplete type tx25.c:115: error: dereferencing pointer to incomplete type tx25.c:116: error: dereferencing pointer to incomplete type tx25.c:117: error: dereferencing pointer to incomplete type tx25.c:124: error: dereferencing pointer to incomplete type tx25.c:125: error: dereferencing pointer to incomplete type tx25.c:126: error: dereferencing pointer to incomplete type Signed-off-by: Fabio Estevam <[email protected]> Acked-by: Stefano Babic <[email protected]>
2011-09-12omap3: beagle: Fix build warningSanjeev Premi
This patch fixes the warning dure to recent changes to the board configuration: cmd_i2c.o cmd_i2c.c -c cmd_i2c.c:109:1: warning: missing braces around initializer cmd_i2c.c:109:1: warning: (near initialization for 'i2c_no_probes[0]') Signed-off-by: Sanjeev Premi <[email protected]> Cc: Jason Kridner <[email protected]> Acked-by: Jason Kridner <[email protected]>
2011-09-10KS8695: convert KS8695 eth driver to CONFIG_MULTI_ETHGreg Ungerer
Trivial conversion of the ks8695eth driver to a CONFIG_MULTI_ETH type driver. Signed-off-by: Greg Ungerer <[email protected]>
2011-09-10CM4000: fix missing RAM definitions for OpenGear boardsGreg Ungerer
The OpenGear boards CM4008, CM4116 and CM4148 need their DRAM base and RAM stack base addresses defined. Fixes: board.c: In function ‘__dram_init_banksize’: board.c:227: error: ‘CONFIG_SYS_SDRAM_BASE’ undeclared (first use in this function) board.c:227: error: (Each undeclared identifier is reported only once board.c:227: error: for each function it appears in.) board.c: In function ‘board_init_f’: board.c:270: error: ‘CONFIG_SYS_INIT_SP_ADDR’ undeclared (first use in this function) board.c:303: error: ‘CONFIG_SYS_SDRAM_BASE’ undeclared (first use in this function) Signed-off-by: Greg Ungerer <[email protected]>
2011-09-07MX31: mx31pdk: make use of GPIO frameworkStefano Babic
Signed-off-by: Stefano Babic <[email protected]>
2011-09-07ARM: PXA: remove broken "zylonite" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Marek Vasut <[email protected]> Acked-by: Marek Vasut <[email protected]>
2011-09-07ARM: remove broken "shannon" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Rolf Offermanns <[email protected]>
2011-09-07ARM: remove broken "modnet50" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Thomas Elste <[email protected]>
2011-09-07ARM: remove broken "lpc2292sodimm" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]>
2011-09-07ARM: remove broken "lart" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Alex Züpke <[email protected]>
2011-09-07ARM: remove broken "impa7" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Marius Gröger <[email protected]>
2011-09-07ARM: remove broken "gcplus" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: George G. Davis <[email protected]>
2011-09-07ARM: remove broken "evb4510" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Curt Brune <[email protected]>
2011-09-07ARM: remove broken "ep7312" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Marius Gröger <[email protected]>
2011-09-07ARM: remove broken "dnp1110" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]> Cc: Alex Züpke <[email protected]>
2011-09-07ARM: remove broken "SMN42" board.Wolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]> Cc: Albert ARIBAUD <[email protected]>
2011-09-04Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk
* 'master' of git://git.denx.de/u-boot-coldfire: ColdFire:Clean up the CONFIG_STANDALONE_LOAD_ADDR usage ColdFire:Add mb for 5253 dram initialization ColdFire:Define the DM9000 byteswap for M5253 board. ColdFire:Update the env settings for several boards. ColdFire:disable the NFS define for 52277 board. ColdFire:Update the timer_init since it was unified. ColdFire: Cleanup for partial linking and --gc-sections ColdFire: Update compile flags for each CPUs ColdFire:Fix the configuration broken for some boards.
2011-09-04ColdFire:Define the DM9000 byteswap for M5253 board.Jason Jin
The M5253DEMO board swapped the io pins which make the standard IO function did not work for dm9000. Define the byte swap to use raw io for dm9000. Signed-off-by: Jason Jin <[email protected]>
2011-09-04ColdFire:Update the env settings for several boards.Jason Jin
Move the environment outside the u-boot for some boards and enlarge the u-boot size in some env settings. Signed-off-by: Jason Jin <[email protected]>
2011-09-04ColdFire:disable the NFS define for 52277 board.Jason Jin
There is no network device on ColdFire 52277EVB board.But the default cmd include NFS define which make the build error. Signed-off-by: Jason Jin <[email protected]>
2011-09-04BeagleBoard: config: updated default configurationJason Kridner
* Improved boot env var setting * Made room for a 64MB ramdisk by moving from 0x81600000 to 0x81000000 * Added ramarg, ramroot and ramboot env variables Signed-off-by: Jason Kridner <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: Enabled multibus support for I2C in configurationJason Kridner
Signed-off-by: Jason Kridner <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: add optargs/buddy/cameraJason Kridner
buddy and camera are used to configure peripherals in the kernel at boot time that cannot easily be detected by the kernel. Signed-off-by: Jason Kridner <[email protected]> Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: increase command-line functionalityJason Kridner
Enable the expression evaluator. Signed-off-by: Jason Kridner <[email protected]> Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: make mtest runJason Kridner
Utilize the alternate mtest and define a valid region. Signed-off-by: Jason Kridner <[email protected]> Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: enable DSSKoen Kooi
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: enable asix driver and dhcpKoen Kooi
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: enable networkingKoen Kooi
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: decrease bootdelay to 2 secondsKoen Kooi
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: use uImage.beagle for tftpJoel A Fernandes
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: hardcode MAC for onboard SMSCJoel A Fernandes
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: config: load kernel from MMC ext, not FATKoen Kooi
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04BeagleBoard: Added userbutton commandJason Kridner
Based on commit f1099c7c43caf5bac3bf6a65aa266fade4747072 Author: Greg Turner <[email protected]> Date: Tue May 25 09:19:06 2010 -0500 New u-boot command for status of USER button on BeagleBoard-xM Modified bootcmd to check the staus at boot time and set filename of the boot script. * Moved to a BeagleBoard specific file. * Removed changes to default boot command from adding userbutton command. * Made to handle pre-xM boards. * Flipped polarity of the return value to avoid confusion. Success (0) is when the button is pressed. Failure (1) is when the button is NOT pressed. * Used latest revision getting function. * Used latest macros for board revision. * Added xM-C revision definition (optional, since it was default) * updated default configuration with UserButton functionality * Added a separate bootenv variable to load a user defined .txt file * Added an example, showing how a different environment file can be loaded with the user button pressed Signed-off-by: Jason Kridner <[email protected]> Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Cc: Greg Turner <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04beagle: pass expansionboard name in bootargsKoen Kooi
Signed-off-by: Koen Kooi <[email protected]> Signed-off-by: Joel A Fernandes <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
2011-09-04OMAP: Remove omapfb.debug=y from Beagle and Overo env settingsSteve Sakoman
The kernel DSS2 code is mature now, and keeping this setting hurts performance Signed-off-by: Steve Sakoman <[email protected]> Signed-off-by: Sandeep Paulraj <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-23 08:35:49 +0000