summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2010-10-22xes: Make X-ES board names more genericPeter Tyser
Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-22xes: Add board_flash_wp_on()John Schmoller
Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: John Schmoller <[email protected]> Signed-off-by: Peter Tyser <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-22xes: Consolidate checkboard()John Schmoller
Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: John Schmoller <[email protected]> Signed-off-by: Peter Tyser <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-22pci: Add ability to re-enumerate PCI busesJohn Schmoller
Add a new 'pci enum' command which re-enumerates the PCI buses. This command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful in boards with FPGAs connected via PCI/PCIe, boards that support PCI hot-plugging, or during PCI debug. Also enable the 'pci enum' command for X-ES's Freescale-based boards. Signed-off-by: John Schmoller <[email protected]> Signed-off-by: Peter Tyser <[email protected]> Acked-by: Kumar Gala <[email protected]> Acked-by: Wolfgang Denk <[email protected]>
2010-10-22xes: Use common PCI initialization codePeter Tyser
Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: Peter Tyser <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-22corenet_ds: Update CONFIG_SYS_GBL_DATA_SIZE to deal with growth in gd_tKumar Gala
The recent change the env code added an additional 32 bytes into gd_t and that causes to grow pass the previous CONFIG_SYS_GBL_DATA_SIZE size. Signed-off-by: Kumar Gala <[email protected]>
2010-10-22PXA: Remove "xsengine" boardMarek Vasut
This board is broken and it's not possible to repair it. Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: Remove "wepep250" boardMarek Vasut
This board is broken and impossible to repair without deep knowledge or availability of the hardware. Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: Remove "delta" boardMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: zipitz2: Add missing CONFIG_SYS_TEXT_BASEMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: vpac270: Add missing CONFIG_SYS_TEXT_BASEMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: xm250: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: xaeniax: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: trizepsiv: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: pxa255_idp: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: pleb2: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: palmtc: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: palmld: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: lubbock: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: innokom: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: csb226: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: cradle: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: colibri_pxa270: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22PXA: cerf250: Fix for relocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-22MX51: Add video support to vision2 boardStefano Babic
The patch adds support for LCD to the vision2 board. Signed-off-by: Stefano Babic <[email protected]>
2010-10-21a4m072: changes to the default environmentIlya Yanok
The default values for 'addip' and 'norargs' changed per customer request. Everything else cleaned up to fit into 80 symbol line. Signed-off-by: Ilya Yanok <[email protected]>
2010-10-21sh: sh7785lcr: Add CONFIG_SH_SDRAM_OFFSETNobuhiro Iwamatsu
Signed-off-by: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: Nobuhiro Iwamatsu <[email protected]>
2010-10-20MPC52xx, motionpro: update default configurationWolfgang Denk
Signed-off-by: Wolfgang Denk <[email protected]>
2010-10-20Devkit8000: Adapt changes to ARM relocation supportThomas Weber
Fix compilation of Devkit8000 after introduction of ARM relocation support. Signed-off-by: Thomas Weber <[email protected]> Adapt to TEXT_BASE => CONFIG_SYS_TEXT_BASE rename. Signed-off-by: Wolfgang Denk <[email protected]>
2010-10-20Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-10-20Kirkwood: bugfix: broken early console messagesPrafulla Wadaskar
It has been observed that, the complete u-boot banner does not appear on the console when the system is booted from NAND/NOR/SPI flash. This patch fixes this issue on all Marvell boards by adding board_early_init_f() support Signed-off-by: Prafulla Wadaskar <[email protected]>
2010-10-20arm926ejs, suen3: fix relocation issuesHeiko Schocher
- use internal 2k security SRAM as RAM for early stack. - do early inits in board_init_f() Signed-off-by: Heiko Schocher <[email protected]> Cc: Prafulla Wadaskar <[email protected]>
2010-10-20ppc4xx: Fix default environment for AMCC boardsStefan Roese
Commit 0ad7f0950a9bc0a69b3cd5f34ccf7da25fcf1c6d [ppc4xx: cleanup default environment for AMCC boards] broke the default env for many PPC4xx boards. The '\0' character got removed at the end of some environment commands like "update". This patch adds the missing '\0' characters again. Signed-off-by: Stefan Roese <[email protected]>
2010-10-20ppc4xx: Enable NOR flash support in sequoia_ramboot targetStefan Roese
Until now, the Sequoia RAM-booting image disabled NOR flash support as this image was mainly created for NAND-only boards. This patch now enables NOR flash support for this RAM-booting version as well. Signed-off-by: Stefan Roese <[email protected]>
2010-10-20ppc4xx/POST: Add board specific UART POST test to lwmon5Stefan Roese
Add CONFIG_POST_UART to implement a board specific UART POST test. This is done since lwmon5 needs to set POST_ALWAYS to run this test on each reboot. And we don't want to change the default behavious of this this. Signed-off-by: Stefan Roese <[email protected]>
2010-10-20tqm85xx: Update PCI codePeter Tyser
Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <[email protected]> CC: [email protected] Signed-off-by: Kumar Gala <[email protected]>
2010-10-20Adding fixed sdram setting for cornet_ds boardYork Sun
800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram setting. SPD based parameters and fixed parameters can be toggled by hwconfig. To use fixed parameters, hwconfig=fsl_ddr:sdram=fixed To use SPD parameters, hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1 Signed-off-by: York Sun <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-20Enable POST memory test for P2020DSYork Sun
Signed-off-by: York Sun <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-20Enable POST memory test for corenet_dsYork Sun
Signed-off-by: York Sun <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2010-10-20Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-10-19update board EB+CPUx9K2Jens Scharsig
* update to support arm reloaction * unnecessary environment variables removed Signed-off-by: Jens Scharsig <[email protected]>
2010-10-19Add support for HP Jornada flashrom boardsKristoffer Ericson
This patch adds support for the HP Jornada flashboards that were made in 2008. Older flashroms should work if memory registers are adjusted. Signed-off-by: Kristoffer Ericson <[email protected]> Adpted for TEXT_BASE -> CONFIG_SYS_TEXT_BASE rename. Removed now redundant board/jornada/config.mk file. Removed unused empty jornada_init() function to silence "jornada.c:35: warning: 'jornada_init' defined but not used" Signed-off-by: Wolfgang Denk <[email protected]>
2010-10-19Build: PXA: Fix Vpac270 build variantsMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-19PXA: Fix vpac270 OneNAND booterMarek Vasut
NOTE: The modification in Makefile will be superseded by a pending patch! Signed-off-by: Marek Vasut <[email protected]>
2010-10-19PXA: Fix Balloon3 for RelocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-19PXA: Fix ZipitZ2 for RelocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-19PXA: Fix vpac270 for RelocMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-19PXA: Add necessary information for RELOCMarek Vasut
Signed-off-by: Marek Vasut <[email protected]>
2010-10-19PXA: fix environment sector size, kernel and environment location for vpac270Mikhail Kshevetskiy
Define ENV_ADDR as MONITOR_BASE + MONITOR_LEN. Fix environment sector size (NOR: 32Kb for first four sectors and 128Kb for other; OneNAND: 128Kb). Last but not least: we have MONITOR_LEN = 0x40000 and one sector for environment (size = 0x20000), so the kernel may start from 0x00060000 only. Signed-off-by: Mikhail Kshevetskiy <[email protected]>
2010-10-19PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000Mikhail Kshevetskiy
* CONFIG_SYS_CLKS_IN_HZ is not used anywhere, so removing it * CONFIG_SYS_HZ is set to 1000 on most architectures, so it seems to be the safe default Signed-off-by: Mikhail Kshevetskiy <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-11 18:32:09 +0000