summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2021-04-08board: gateworks: venice: increase CONFIG_SYS_SPL_MALLOC_SIZETim Harvey
commit 03f1f78a9b44 ("spl: fit: Prefer a malloc()'d buffer for loading images")' changed the way buffer allocation worked for SPL to a more flexible method. For venice this caused breakage that is resolved by increasing the size of CONFIG_SYS_SPL_MALLOC_SIZE as the current FIT slighly exceeds 512KiB. Additionally remove the unnecessary comment on CONFIG_SPL_BSS_MAX_SIZE and CONFIG_SYS_SPL_MALLOC_SIZE as the size is obvious from the define. Signed-off-by: Tim Harvey <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2021-04-08imx: ventana: enable dm for MTD and NANDTim Harvey
Enable driver model for MTD and NAND support allowing us to remove the iomux, init, and most of the static configuration. Signed-off-by: Tim Harvey <[email protected]>
2021-04-08imx: ventana: enable dm support for USBTim Harvey
Enable dm support for USB (which also requires dm support for fixed regulators used for vbus enable) and remove usb iomux which is no longer needed. We can remove the handling of otgpwr_en gpio as this is defined in dt as usbotg vbus-supply but we need to keep the handling of USB_HUB_RST# for boards that have a USB HUB as that isn't defined in the dt's currently. Signed-off-by: Tim Harvey <[email protected]>
2021-04-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Watchdog, Unleashed and Icicle improvements
2021-04-08arm: socfpga: Rename Stratix10 and Agilex handoff common macrosSiew Chin Lim
Rename handoff_s10.h to handoff_soc64.h. Changed macros prefix from S10_HANDOFF to SOC64_HANDOFF. Signed-off-by: Siew Chin Lim <[email protected]>
2021-04-08riscv: sifive: Rename fu540 board to unleashedBin Meng
In preparation to add SiFive Unmatched board support, let's rename the existing fu540 board to unleashed. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Leo Yu-Chi Liang <[email protected]>
2021-04-08riscv: Remove unused define in maix headerSean Anderson
This define was left over from a previous revision, and was never used. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Bin Meng <[email protected]>
2021-04-08imx8mp_evk: add/cleanup variable for distroPeng Fan
Add fdt_addr_r fdtfile which used by distro boot Clean up environment Signed-off-by: Peng Fan <[email protected]>
2021-04-08imx8mm_evk: add/cleanup variable for distroPeng Fan
Add fdt_addr_r fdtfile which used by distro boot Clean up environment Signed-off-by: Peng Fan <[email protected]>
2021-04-08configs: sheevaplug: remove non-dm MMC driverHarm Berntsen
This will be replaced with the driver model version Signed-off-by: Harm Berntsen <[email protected]> Reviewed-by: Stefan Roese <[email protected]> CC: Prafulla Wadaskar <[email protected]> CC: Stefan Roese <[email protected]> CC: Tom Rini <[email protected]>
2021-04-08configs: openrd: remove non-dm MMC driverHarm Berntsen
Unfortunately this board has no DM support at all. We are also way past the deadline for driver model support for various devices on this board. Signed-off-by: Harm Berntsen <[email protected]> Reviewed-by: Stefan Roese <[email protected]> CC: Stefan Roese <[email protected]>
2021-04-08configs: remove unused CONFIG_SYS_MMC_BASE defsHarm Berntsen
These boards use an MMC driver that does not use this definition Signed-off-by: Harm Berntsen <[email protected]> Reviewed-by: Stefan Roese <[email protected]> CC: Stefan Roese <[email protected]> CC: Mario Six <[email protected]> CC: Dennis Gilmore <[email protected]>
2021-04-08arm: mvebu: ds414: Add sample u-boot update commandPhil Sutter
Call 'run update_uboot' to fetch u-boot-spl.kwb via TFTP and write it into the correct SPI flash location. The latter's size is defined in DS414's DTB file, so hard-coding it should be acceptable here. Take care to not append garbage from RAM to the written image and to stay within assigned flash boundaries even if an oversized image was fetched. Signed-off-by: Phil Sutter <[email protected]>
2021-04-08arm: mvebu: board/Synology: Unify legacy kernel supportPhil Sutter
Move the relevant bits from ds109.{c,h} into common/ and adjust the code to fit both DS109 and DS414. Moreover: * Introduce syno_board_id() which translates CONFIG_MACH_TYPE into the expected board ID tag value. * Properly initialize isusbhost, mac and mtu fields from env variables. * Set the right bootargs/bootcmd to correctly boot legacy kernel out of the (DS414) box. Getting the ramdisk location right is a bit tedious. Cc: Walter Schweizer <[email protected]> Signed-off-by: Phil Sutter <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-04-06Merge tag 'dm-pull-6apr21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini
ENOSYS clean-up Minor dtoc improvements Convert CONFIG_MISC_INIT_F to Kconfig Allow unit tests to run on any board pylibfdt build-rule fix
2021-04-06Convert CONFIG_MISC_INIT_F to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_MISC_INIT_F Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2021-04-05Merge tag 'rockchip-for-v2021.07' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Fix rk3368 lion board support; - Fix px30 odroid-go2 board support; - Add rk3399 NanoPi R4s and NanoPi M4B board support;
2021-04-05Merge branch 'next'Tom Rini
2021-04-05imx8mn_ddr4_evk: Allow booting the kernel by defaultFabio Estevam
Currently it is not possible to boot Linux from the SD card by default. Make the necessary adjustments to allow it. Reported-by: Peter Bergin <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Andrey Zhizhikin <[email protected]> # imx8mn_ddr4_evk Reviewed-by: Peng Fan <[email protected]>
2021-03-30include: configs: rk3399: drop a dangling commentPeter Robinson
Drop a irrelevent comment now the related configs have moved to the various config files. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2021-03-30rockchip: rk3368: set CONFIG_SYS_BOOTM_LEN to 64MBHeiko Stuebner
Mimicing for example the rk3399, set the SYS_BOOTM_LEN to 64MB so that regular kernel images can get loaded without problems. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2021-03-30rockchip: rk3368: adjust CONFIG_SYS_LOAD_ADDRHeiko Stuebner
CONFIG_SYS_LOAD_ADDR currently is at 0x00280000 which is only 512KB behind the area where we load u-boot to, which depending on u-boot size may overlap at some point. So for safety just pick the same value rk3399 has and set CONFIG_SYS_LOAD_ADDR to 0x00800800 on rk3368 as well. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2021-03-29Merge tag 'v2021.04-rc5' into nextTom Rini
Prepare v2021.04-rc5
2021-03-27x86: coral: Put the eMMC firstSimon Glass
At present the eMMC device does not have an alias so it appears after the SD card which is device 1. There is no device 0 which is odd. Make the eMMC device be the first one. Update the boot script to use the new device. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2021-03-23configs: ls1028aqds: Move CONFIG_SPI_FLASH_* definitions to defconfigKuldeep Singh
LS1028A-QDS has CONFIG_SPI_FLASH_SST and CONFIG_SPI_FLASH_EON defines present in header. Move these entries from header to defconfigs. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-23configs: lx2160a: Remove unused Flexspi config optionsKuldeep Singh
It is now safe to remove Flexspi configs NXP_FSPI_FLASH_SIZE and NXP_FSPI_FLASH_NUM options from headers as they are no longer used by driver anymore. Signed-off-by: Kuldeep Singh <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-20board: Add MT8183 pumpkin board supportFabien Parent
Add the MT8183 pumpkin board support. Signed-off-by: Fabien Parent <[email protected]>
2021-03-20configs: mt8516: use bootcmd from config_distro_bootcmd.hFabien Parent
Instead of redefining our own way to boot, let's just use config_distro_bootcmd.h. Signed-off-by: Fabien Parent <[email protected]>
2021-03-20board: mediatek: rename pumpkin board into mt8516Fabien Parent
More than one pumpkin board has been made with different MediaTek SoCs. Rename the pumpkin board to follow the naming convention of all other MediaTek boards and also to not be confusing when other pumpkin boards will be added in follow-up commits. Signed-off-by: Fabien Parent <[email protected]>
2021-03-16arm: rmobile: Add Silicon Linux EK874 board supportLad Prabhakar
The EK874 development kit from Silicon Linux is made of CAT874 (the main board) and CAT875 (the sub board that goes on top of CAT874). This patch adds the required board support to boot Si-Linux EK874 board based on R8A774C0 SoC. DTS files apart from r8a774c0-ek874-u-boot.dts and r8a774c0-u-boot.dtsi have been imported from Linux kernel 5.11 commit f40ddce88593 ("Linux 5.11"). Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]>
2021-03-16arm: rmobile: Add HopeRun HiHope RZ/G2M board supportBiju Das
The HiHope RZ/G2M board from HopeRun consists of main board (HopeRun HiHope RZ/G2M main board) and sub board(HopeRun HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M main board. This patch adds the required board support to boot HopeRun HiHope RZ/G2M board. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]>
2021-03-15Merge tag 'v2021.04-rc4' into nextTom Rini
Prepare v2021.04-rc4
2021-03-15Merge tag 'ti-v2021.04-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-ti - Fix boot for da850-evm and omap3_logic - Optimize SPL size for am65x boards
2021-03-15Merge tag 'u-boot-stm32-20210312' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-stm - Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver - stm32mp1_trusted_defconfig rely on SCMI support - Remove the nand MTD configuration for NOR boot in stm32mp1 board - STM32programmer update - Bsec: manage clock when present in device tree - stm32mp15: move bootdelay configuration in defconfig - Update for stm32 dsi and dw_mipi_dsi - STM32 MCU's cleanup - Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags - Update stm32mp1 doc
2021-03-15include: configs: am65x_evm: Optimize size of SPL BSSLokesh Vutla
Current BSS allocation of SPL is as below: $ size spl/u-boot-spl text data bss dec hex filename 132369 7852 1496 141717 22995 spl/u-boot-spl But 20KB is allocated currently for BSS. Reduce it to 3KB and save some space for stack. Signed-off-by: Lokesh Vutla <[email protected]>
2021-03-15ARM: da850-evm: Fix boot issues from missing SPL_PAD_TOAdam Ford
In a previous attempt to unify config options and remove items from the whitelist file, SPL items were moved into a section enabled with CONFIG_SPL_BUILD. Unfortunately, SPL_PAD_TO is referenced at the head Makefile and uses this define to create padding of the output file. When it was moved to CONFIG_SPL_BUILD, it caused boot errors with devices that are not booting from NOR. Fix the boot issues by moving SPL_PAD_TO out so it's always. Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig") Signed-off-by: Adam Ford <[email protected]>
2021-03-11configs: stm32mp15: move bootdelay configuration in defconfigPatrick Delaunay
The STM32MP15 boards have no reason to configure bootdelay in stm32mp1.h as it is already done with CONFIG_BOOTDELAY (default = 2) and in include/env_default.h. This patch allows configuration for customers which reuse stm32mp1.h and reduce the size of the default environment. Signed-off-by: Patrick Delaunay <[email protected]> Reviewed-by: Patrice Chotard <[email protected]>
2021-03-08Merge tag 'u-boot-amlogic-20210308' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - button: adc: fix treshold typo - configs: meson64: add fdtoverlay_addr_r
2021-03-08configs: meson64: add fdtoverlay_addr_rNeil Armstrong
In order to support loading FTD Overlays when booting with the pxe command (or extlinux.conf), supported with [1], add the missing fdtoverlay_addr_r used to load the overlay before applying it to the FDT loaded at fdt_addr_r. [1] https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/ Signed-off-by: Neil Armstrong <[email protected]>
2021-03-08Makefile: socfpga: Add target to generate hex output for combined spl and dtbDalon Westergreen
Add target to Makefile to generate "u-boot-spl-dtb.hex" for Intel SOCFPGA SOC64 devices (Stratix 10 and Agilex). "u-boot-spl-dtb.hex" is hex formatted spl with and offset of CONFIG_SPL_TEXT_BASE. It combines the spl image and dtb. "u-boot-spl-dtb.hex" is needed to generate the final configuration bitstream for Intel SOCFPGA SOC64 devices. Signed-off-by: Dalon Westergreen <[email protected]> Signed-off-by: Siew Chin Lim <[email protected]>
2021-03-08configs: socfpga: soc64: Move CONFIG_BOOTCOMMAND to defconfigSiew Chin Lim
CONFIG_BOOTCOMMAND have been moved to Kconfig.boot. This patch move the CONFIG_BOOTCOMMAND macro from socfpga_soc64_common.h to *_defconfig file for both Stratix 10 and Agilex. Signed-off-by: Siew Chin Lim <[email protected]>
2021-03-05ppc: qemu: Drop a custom env variable 'fdt_addr_r'Bin Meng
Now that we have switched to CONFIG_OF_CONTROL, and we can use the env variable 'fdtcontroladdr' directly instead of creating one that is duplicated. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Enable RTC support via I2CBin Meng
The QEMU ppce500 target integrates a Freescale I2C controller and has a Pericom pt7c4338 RTC connected to it. Enable corresponding DM drivers so that 'date' command is actually useful. Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Switch over to use DM ETH and PCIBin Meng
At present the board supports non-DM version PCI and E1000 drivers. Switch over to use DM ETH and PCI by: - Rewrite the PCI address map functions using DM APIs - Enable CONFIG_MISC_INIT_R to do the PCI initialization and address map - Drop unnecessary ad-hoc config macros - Remove board_eth_init() in the board codes Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Switch over to use DM serialBin Meng
The QEMU ppce500 target integrates 2 NS16550 serial ports. Switch over to use the DM version of the driver by: - drop unnecessary ad-hoc config macros - add get_serial_clock() in the board codes Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Simon Glass <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05ppc: qemu: Fix CONFIG_SYS_PCI_MAP_ENDBin Meng
CONFIG_SYS_PCI_MAP_END currently points to 0xe8000000, which means the upper end of the virtual address mapped to PCI bus address ends at 0xe8000000. But this is wrong as the CCSBAR was already mapped at 0xe0000000 with a 1 MiB size. Fixes: fa08d3951777 ("PPC 85xx: Add qemu-ppce500 machine") Signed-off-by: Bin Meng <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2021-03-05configs: fsl: move via specific defines to KconfigRajesh Bhagat
Moves below via specific defines to Kconfig: CONFIG_FSL_VIA Signed-off-by: Rajesh Bhagat <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-03-05arm: fsl: common: Improve NXP VID driver PMBus supportStephen Carlson
This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <[email protected]> Signed-off-by: Wasim Khan <[email protected]> Tested-by: Wasim Khan <[email protected]> [Rebased] Signed-off-by: Priyanka Jain <[email protected]>
2021-03-03Merge tag 'u-boot-imx-20210303' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX for 2021.04 ---------------- - new boards: - i.MX8MN Beacon EmbeddedWorks (2GB) - Gateworks Venice imx8mm - convert to DM: - imx53-qsb, mx53loco, mx51evk, mx23-evk - Fixes : - Network : FEC ethernet quirks - DH dh-imx6 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/6597
2021-03-03board: gateworks: imx8mm: Add Gateworks Venice board supportTim Harvey
Add initial support for Gateworks Venice product family based on the i.MX 8M Mini SoC Signed-off-by: Tim Harvey <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-14 23:10:33 +0000