| Age | Commit message (Collapse) | Author |
|---|
|
Handle boot for the 3 instance of MMC and call the command stm32prog
for serial boot on USB or on UART as it is done for other STM32MP platform.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
|
|
Enable OF_UPSTREAM flag for STM32F7 platforms.
Use upstream device tree for DSI and LTDC nodes,
As now in upstream DT, in panel@0 node, power-supply property is
present, which is a fixed-regulator, add DM_REGULATOR_FIXED flag
for stm32f769-disco boards.
Set also DEFAULT_FDT_FILE in defconfigs and use it in stm32f746-disco.h
to indicate which FDT file to load (All STM32F7 boards are using this
file).
If something is missing, it must be added in upstream device tree
in linux kernel ("px_clk" for DSI by example).
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>
Reviewed-by: Patrick Delaunay <[email protected]>
|
|
The ROC-RK3576-PC is a SBC made by Firefly, designed around the RK3576
SoC. This adds the needed board infrastructure and config for it.
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The Rockchip RK3576 is a ARM-based SoC with quad-core Cortex-A72
and quad-core Cortex-A53 including 6TOPS NPU, Mali-G52 MC3, HDMI Out,
DP, eDP, MIPI DSI, MIPI CSI2, LPDDR4/4X/5, eMMC5.1, SD3.0/MMC4.5, UFS,
USB OTG 3.0, Type-C, USB 2.0, PCIe 2.1, SATA 3, Ethernet, SDIO3.0, I2C,
UART, SPI, GPIO and PWM.
Add arch core support for it.
Signed-off-by: Xuhui Lin <[email protected]>
[adapted for mainline u-boot]
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Rockchip RK3528 is a ARM-based SoC with quad-core Cortex-A53.
Add initial arch support for the RK3528 SoC.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Ensure rk3588_common.h can be used by boards directly by defining a
blank ROCKCHIP_DEVICE_SETTINGS unless it already is defined.
Add a default SYS_CONFIG_NAME to include rk3588_common.h unless a board
target overrides it in its board Kconfig.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Ensure rk3568_common.h can be used by boards directly by defining a
blank ROCKCHIP_DEVICE_SETTINGS unless it already is defined.
Add a default SYS_CONFIG_NAME to include rk3568_common.h unless a board
target overrides it in its board Kconfig.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Ensure ROCKCHIP_DEVICE_SETTINGS is defined before including
rk3588_common.h in board include/configs files.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Ensure ROCKCHIP_DEVICE_SETTINGS is defined before including
rk3568_common.h in board include/configs files.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The partitions env variable is using an outdated partition layout that
is typically expected to be used with older vendor miniloader blobs.
Rockchip devices will run fine using any partition layout if the first
16 MiB of MMC storage is ignored/skipped.
Remove the partitions env variable to stop encourage users a continued
use of this outdated partition layout on RK3588 devices.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
The partitions env variable is using an outdated partition layout that
is typically expected to be used with older vendor miniloader blobs.
Rockchip devices will run fine using any partition layout if the first
16 MiB of MMC storage is ignored/skipped.
Remove the partitions env variable to stop encourage users a continued
use of this outdated partition layout on RK356x devices.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
In order to be able to use Device Tree Overlays, the fdtoverlay_addr_r
needs to be specified.
Follow what's been done for other Rockchip SoCs and leave 1MiB for the
base DTB before the address for the overlay.
Signed-off-by: Quentin Schulz <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx/FPGA changes for v2025.07-rc1
AMD/Xilinx:
- Synchronize enums around tcm_mode
- Access bootmode registers via firmware interface
- Setup default values for DEBUG_UART
- Fix dfu alt buffer clearing
- Convert loadpdi command to fpga
- Fix board detection code
- Minor defconfig updates
Versal:
- Wire multi_boot register
Versal Gen 2:
- Enable missing drivers
- Wire i2c FRU decoding at start
- Wire saving variables to different locations
- Disable default DEBUG_UART
- Wire USB/UFS boot and fix access via firmware interface
- Minor fixes
ZynqMP/Kria:
- Enable mkfwumdata
- Topic board update
- Enhance binman configurations
- Kria usb update
BuR:
- Add multiple Zynq based boards
cadence_ospi:
- Enable device reset
fpga:
- Add support for loading bitstream for Altera SoCs
|
|
This commit adds support for the brcp1, brsmarc2, brcp150 and brcp170
boards. This boards are based on the Xilinx Zynq SoC.
Signed-off-by: Bernhard Messerklinger <[email protected]>
Acked-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Adding support for the usb distro boot command.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/121b6879efde0b83d3933852442895631c4cb24f.1744273853.git.michal.simek@amd.com
|
|
Adding support for the ufs distro boot command.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/c0e6737ae4119963afc8ea19b49b998a013d06c4.1744273853.git.michal.simek@amd.com
|
|
Adjust configuration and devicetree so the topic-miami board actually
boots.
Replace the custom scripting and just use distro_boot. Override the
standard zynq routines.
The board attempts to boot from SD card first, and falls back to booting
UBIFS from the QSPI NOR flash.
Signed-off-by: Mike Looijmans <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
Allow config headers that include zynq-common.h to provide their own
(distro) boot strategies. This is implemented by skipping the section
when BOOT_ENV has already been defined.
Signed-off-by: Mike Looijmans <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
On the AM3359 ICE we have two modes of operation CPSW mode or PRU-ICSS
mode.
For PRU-ICSS mode, connect Pin2 and Pin3 of J18 and J19 and for CPSW mode,
connect Pin1 and Pin2 of J18 and J19.
This patch adds support for PRUSS mode boot strapping from uboot.
Co-developed-by: Basharath Hussain Khaja <[email protected]>
Signed-off-by: Basharath Hussain Khaja <[email protected]>
Signed-off-by: Parvathi Pudi <[email protected]>
|
|
The Tegra Note 7 is a mini tablet computer and the second Tegra 4
based mobile device designed by Nvidia that runs the Android operating
system. The Tegra Note has a 7" IPS display with 1280 x 800 (217 ppi)
resolution. The 1 GB of RAM and 16 GB of internal memory can be
supplemented with a microSDXC card giving up to 64 GB of additional
storage.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The ASUS Transformer Pad TF701T is an Android tablet computer made by
ASUS, successor to the ASUS Transformer Pad Infinity. The tablet includes
a Tegra 4 T114 processor clocked at 1.9 GHz, and an upgraded 2560×1600
pixel resolution screen, increasing the pixel density to 300 PPI and
a mobile dock. Transformers (t114) board derives from Nvidia Macallan
development board.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Most device headers contain SoC specific part and common Tegra post part.
Add a generic header which can be used by any Tegra device of one of the
supported SoC generations (T20, T30, T114, T124 or T210) without need in
device specific configuration.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Convert CFG_TEGRA_BOARD_STRING into Kconfig option and move it into device
board Kconfig.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Link CFG_SYS_NS16550_COM1 value to chosen CONFIG_TEGRA_ENABLE_UART Tegra
wide. Remove all CFG_SYS_NS16550_COM1 from device headers.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The Motorola Atrix 4G (MB860) and Droid X2 (MB870) both featured a
dual-core NVIDIA Tegra 2 AP20H processor clocked at 1GHz, coupled with 1GB
of DDR2 RAM. Storage consisted of 16GB of internal flash memory, expandable
via microSD. The display was a 4.0-inch TFT LCD with a resolution of
960x540 pixels (qHD). The devices originally ran on Android up to 2.3
(Gingerbread).
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-snapdragon
Qualcomm changes for v2025.07:
CI: https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/pipelines/25653
There's been a surprising amount of activity lately on the Qualcomm
side with the two oldest boards getting some fresh attention and a lot
of cleanup and polish going on across the board.
* SDM660 gets USB phy fixes and a pinctrl driver
* The recently added SA8775P/QCS9100 SoC gets a pinctrl driver
* The Qualcomm pinctrl driver now handles reserved pins correctly,
fixing crashes on some boards when running "gpio status -a"
* OF_UPSTREAM_BUILD_VENDOR is enabled in qcom_defconfig
* SDM845 and SC7280 get missing clocks added (since we're now stricter
about those). This gets USB working more reliably in more cases.
* DM_USB_GADGET is enabled for all boards using DWC3 and fasbtoot is
enabled too
* A bug in the livetree fixup code is fixed (making USB work on a lot
more platforms)
* Button label lookup is made case insensitive* bootretry becomes more dynamic, allowing it to be hijacked to make a
"persistent" boot menu that allows dropping to U-Boot shell later on
* A new qcom-phone.config fragment is added along with a phone-specific
default environment and phone-specific debugging/bringup docs. These
make U-Boot more usable on devices without a serial port or keyboard.
* The db820c gets fixed up and updated documentation
* The db410c also gets some love and modernisation as well as a new
reviewer.
* A new driver is added for the USB VBUS regulator found on various
Qualcomm PMICs
* The Qualcomm SPMI driver gets some fixes and cleanup for SPMI v5 and
v7 support.
|
|
Reduce the environment size by using standard boot instead of distro boot.
It uses faster bootdevs first by default (eMMC -> SD -> USB -> Network), so
set "boot_targets" to keep the current ordering (USB -> SD -> eMMC ->
Network). Perhaps this should be changed for consistency, but for now this
keeps the behavior similar to before.
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by:
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add support for the Toradex SMARC iMX8MP.
Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: Vitor Soares <[email protected]>
|
|
Christian Marangi <[email protected]> says:
This little series adds initial support for Airoha AN7581 SoC.
With the help of some backport patch, this use OF_UPSTREAM
directly.
Posting this to have the targer and the very basic driver.
Ethernet, SNAND and eMMC support is already ready downstream
and will be posted shortly after this gets approved.
Having the first driver ready permits to separately push
dedicate series for SNAND, eMMC and Ethrnet as they all depends
on basic support of clock and reset and nothing else.
Link: https://lore.kernel.org/r/[email protected]
|
|
Add initial support for Airoha AN7581 SoC. This adds the initial Kconfig
and Makefile entry for the SoC, an U-Boot specific DTSI and initial config
for it. Also add the initial code for CPU and RAM initialization.
Signed-off-by: Christian Marangi <[email protected]>
|
|
CFG_SYS_SPI_* are used in falcon boot to specify the offsets and size of
the respective payloads. This patch moves them to Kconfig keeping the
values consistent for each of the affected boards.
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Anshul Dalal <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
- More Tegra video improvements
|
|
Remove CFG_SYS_SDRAM_BASE so that we can get DRAM base
from dt instead of compile time config.
Removing this config helps the u-boot more portable.
Signed-off-by: Jimmy Ho <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
The Ouya microconsole is build on Nvidia Tegra 3 (T33) SoC, featuring a
quad-core 1.7 GHz ARM Cortex-A9 CPU and a ULP GeForce GPU, paired with 1GB
of DDR3 RAM and 8GB of internal flash storage. Running a modified Android
4.1 (Jelly Bean) OS with a custom launcher, it aimed for open-source gaming
via a digital storefront.
This implementation is mostly based on upstream Linux device tree and
fragments of work done by previous developers.
Co-developed-by: Peter Geis <[email protected]>
Signed-off-by: Peter Geis <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Wadim Egorov <[email protected]> says:
This patch series syncs the phyCORE-AM62Ax feature-wise with our other
K3-based SoMs by adding SoM overlay handling and capsule updates. It
also introduces support for USBDFU boot and includes various minor fixes.
Link: https://lore.kernel.org/r/[email protected]
|
|
Define firmware names for phycore-am62ax capsules.
Signed-off-by: Wadim Egorov <[email protected]>
|
|
Basic board support for BeagleY-AI. Information on this
board can be found at https://beagleboard.org/beagley-ai
Signed-off-by: Robert Nelson <[email protected]>
Signed-off-by: Nishanth Menon <[email protected]>
Signed-off-by: Andrew Davis <[email protected]>
|
|
The flag for enabling the ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE quirk can be
handled easily enough in Kconfig. This lets us remove a function but not
obviously correct usage of the IS_ENABLED() macro.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
|
|
https://source.denx.de/u-boot/custodians/u-boot-tegra into next
|
|
The Mi Pad is a tablet computer based on Nvidia Tegra K1 SoC which
originally ran the Android operating system. The Mi Pad has a 7.9" IPS
display with 1536 x 2048 (324 ppi) resolution. 2 GB of RAM and 16/64 GB of
internal memory that can be supplemented with a microSDXC card giving up to
128 GB of additional storage.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
The existing memory layout places the bloblist at 0xb000 and the fdt at
0x100, resulting in a 0xaf00 size constraint for the fdt. This constraint
has been reached. Lets modify the layout by moving the bloblist to 0x100,
device tree to 0x1000 and placing early memory allocation after pre-console
buffer at 0xf4000. This should guarantee sufficient memory allocation for
future expansion.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/24816
Please pull the SoCFPGA changes for next from u-boot-socfpga, containing
boot support for the Altera SoCFPGA Agilex 5 platform in U-Boot. The
changes include:
1. Board-specific configurations and setup required to enable Agilex 5
operation in U-Boot.
2. Integration of cache coherency unit (CCU) initialization routine,
including CCU conguration in DT.
3. Clock, firewall (configured in DT), SMMU, low level initialization
specific to Agilex 5.
4. Integration of memory initialization routine, including DDR setup.
This patch set has been tested on Agilex 5 devkit with QSPI boot
(UBI/UBIFS) and RAM boot (TFTP & ARM DS debugger).
|
|
Add the required configuration in the U-Boot env to enable Linux QSPI
boot with UBI / UBIFS.
Signed-off-by: Alif Zakuan Yuslaimi <[email protected]>
Signed-off-by: Tien Fong Chee <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
Prepare v2025.04-rc3
|
|
Branch contains bringup of Acer Iconia Tab A500 (codename picasso), a
Tegra 2 Android device with decent Linux kernel support. Ondevice tests
and U-Boot test suit all passed.
|
|
As AM57x uses overlays for display and camera interfaces, add support to
load DT overlay files to MMC boot.
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Anurag Dutta <[email protected]>
|
|
TI AM57x boards use a custom (though family common to TI boards) mechanism
for booting Linux. Add support to enable custom MMC boot as a default
option along with the distroboot approach.
Also, add supporting mmc boot environment variables which shall be used for
custom MMC boot
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Anurag Dutta <[email protected]>
|
|
Kernel commit 837833a724b7 ("environment: ti: Add get_fit_config command
to get FIT config string") introduced "get_fit_config" in ti_armv7_common.h
to mangle the fdtfile name when used to select a config node from the OE
made FIT image. However, the ti_armv7_common.h is common for both K3 and
AM57xx platforms. AM57xx platforms' fdtfile name does not have '/' and
"conf-" prefix so the setexpr command fails and boot hangs.
Override the get_fit_config in AM57x specific config header to get the
correct FIT config name.
Signed-off-by: Sinthu Raja <[email protected]>
Signed-off-by: Anurag Dutta <[email protected]>
|
|
Variable $fdtfile needs to be set for automatically loading a device-tree
from the ESP or boot partition.
* Set CONFIG_DEFAULT_FDT_FILE in the defconfig.
* Add $fdtfile to the default environment.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
