summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2020-06-25Merge tag 'xilinx-for-v2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2020.10 Versal: - xspi bootmode fix - Removing one clock from clk driver - Align u-boot memory setting with OS by default - Map TCM and OCM by default ZynqMP: - Minor DT improvements - Reduce console buffer for mini configurations - Add fix for AMS - Add support for XDP platform Zynq: - Support for AES engine - Enable bigger memory test by default - Extend documentation for SD preparation - Use different freq for Topic miami board mmc: - minor GD pointer removal net: - Support fixed-link cases by zynq gem - Fix phy looking loop in axi enet driver spi: - Cleanup global macros for xilinx spi drivers firmware: - Add support for pmufw reloading fpga: - Improve error status reporting common: - Remove 4kB addition space for FDT allocation
2020-06-24arm64: zynqmp: Reduce console buffer sizeT Karthik Reddy
Reduce console buffer size to 1kbyte to accommodate memory allocations in mini u-boot for zynqmp. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-06-24arm: versal: Fix xspi0 boot modeMichal Simek
Use proper number to be aligned with xspi0 boot mode. Signed-off-by: Michal Simek <[email protected]>
2020-06-22arm: wandboard: move CONFIG_MXC_UART to defconfigHeinrich Schuchardt
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2020-06-22colibri_imx6: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <[email protected]>
2020-06-22colibri_imx7: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <[email protected]>
2020-06-22apalis_imx6: boot env configuration updatesIgor Opaniuk
1. Drop legacy emmcboot wrapper from env. 2. Change the "boot try" order. Default one is: SD -> eMMC -> USB -> DHCP 3. Drop DFU defines Signed-off-by: Igor Opaniuk <[email protected]>
2020-06-22apalis-tk1: enable distrobootIgor Opaniuk
1. Use distro_bootcmd as default boot command instead of legacy emmcboot wrapper. 2. Drop emmcboot and sdboot wrappers. 3. Provide proper boot order for Distro Boot. Signed-off-by: Igor Opaniuk <[email protected]>
2020-06-22configs/colibri_vf.h: drop sdboot in favour of distro_bootcmdMax Krummenacher
The distro bootscript uses kernel_image to get the file name of the kernel, so change that variable name. UBI boot has precedence in the default boot command. If one wants to boot from SD with a working NAND installation stop in U-Boot and enter: setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd Signed-off-by: Max Krummenacher <[email protected]>
2020-06-22colibri-imx6ull/imx7: define bootubipart for distro bootStefan Agner
When using distro boot to boot from UBI volumes the boot partition has been hardcoded to "UBI" (capital letters). However, our default MTD layout uses "ubi" (lower case letter). Define "ubi" as the default UBI partition for distro boot for Toradex. This allows to use distro boot without having to redefine the MTD partition layout which is useful for TorizonCore. Signed-off-by: Stefan Agner <[email protected]>
2020-06-22colibri_imx7: add addresses required for distro bootStefan Agner
Define addresses required for full distro boot support. Signed-off-by: Stefan Agner <[email protected]>
2020-06-22colibri-imx8x: declare consoleargsOleksandr Suvorov
Store all console-related kernel parameters in dedicated variable. Signed-off-by: Oleksandr Suvorov <[email protected]>
2020-06-22mx6cuboxi: Convert to DM_ETHFabio Estevam
Migration to DM_ETH is mandatory, so convert mx6cuboxi to Ethernet Driver Model. This also brings the benefit of restoring Ethernet functionality. Reported-by: Tom Rini <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Tested-by: Tom Rini <[email protected]>
2020-06-20Merge branch 'net' of https://gitlab.denx.de/u-boot/custodians/u-boot-sh ↵Tom Rini
into next - Convert pcnet and eepro100 ethernet drivers to DM
2020-06-20Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
2020-06-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi into nextTom Rini
- Convert fsl_espi to driver model (Chuanhua) - Enable am335x baltos to DM_SPI (Jagan) - Drop few powerpc board which doesn't have DM enabled (Jagan)
2020-06-18imx: convert dms-ba16 boards to DM_VIDEOAnatolij Gustschin
Migration to DM_VIDEO driver is long overdue. Update defconfigs to enable usage of converted ipuv3 driver DM configuration. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Akshay Bhat <[email protected]> Cc: Ken Lin <[email protected]>
2020-06-18ARM: rmobile: Increase PHY auto-negotiation timeout to 20sMarek Vasut
The ethernet PHY on all known Gen3 boards takes a while to come out of reset, increase the auto-negotiation timeout to prevent it from timing out in case the ethernet is used right after the board was reset. Signed-off-by: Marek Vasut <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]>
2020-06-18net: pcnet: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the pcnet driver and convert MIPS malta to use those. Signed-off-by: Marek Vasut <[email protected]> Cc: Daniel Schwierzeck <[email protected]> Cc: Joe Hershberger <[email protected]>
2020-06-18net: pcnet: Drop PCNET_HAS_PROMMarek Vasut
All of one PCNET users has this option set, make this default and drop this config option. Signed-off-by: Marek Vasut <[email protected]> Cc: Daniel Schwierzeck <[email protected]> Cc: Joe Hershberger <[email protected]>
2020-06-18net: eepro100: Add Kconfig entriesMarek Vasut
Add Kconfig entries for the eepro100 driver and convert various boards. Signed-off-by: Marek Vasut <[email protected]>
2020-06-18tbs2910: migrate to DM_VIDEOAnatolij Gustschin
Migration to DM_VIDEO driver is long overdue, configure it in board config files. To enable the display set stdout like: setenv stdout serial,vidconsole Signed-off-by: Anatolij Gustschin <[email protected]> Tested-by: Soeren Moch <[email protected]>
2020-06-18colibri_imx6: fix video stdout in default environmentAnatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <[email protected]> Acked-by: Igor Opaniuk <[email protected]>
2020-06-18apalis_imx6: fix video stdout in default environmentAnatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <[email protected]> Acked-by: Igor Opaniuk <[email protected]>
2020-06-18cm_fx6: fix video stdout in default environmentAnatolij Gustschin
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <[email protected]> Cc: Nikita Kiryanov <[email protected]>
2020-06-18powerpc: Remove TWR-P1025_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Xiaobo Xie <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove T4160QDS_NAND_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Ruchika Gupta <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove T1040QDS_DDR4_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Poonam Aggrwal <[email protected]> Patch-cc: Ruchika Gupta <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove T1024QDS_DDR4_SECURE_BOOT_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Signed-off-by: Jagan Teki <[email protected]>
2020-06-18powerpc: Remove P1022DS_36BIT_NAND_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Timur Tabi <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove configs/MPC8536DS_36BIT_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Priyanka Jain <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove configs/C29XPCIE_NAND_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Po Liu <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Naveen Burmi <[email protected]> Patch-cc: Ruchika Gupta <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Poonam Aggrwal <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-18powerpc: Remove configs/B4420QDS_NAND_defconfig boardJagan Teki
DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Ashish Kumar <[email protected]> Patch-cc: Ruchika Gupta <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Priyanka Jain <[email protected]>
2020-06-13Merge tag 'dm-pull-12jun20' of git://git.denx.de/u-boot-dm into nextTom Rini
patman improvements to allow it to work with Zephyr change to how sequence numbers are assigned to devices minor fixes and improvements
2020-06-12board: tbs2910: Enable distro_boot support.Denis 'GNUtoo' Carikli
This keeps the compatibility with the old bootcmd. The fdtfile environment variable also needed to be set to imx6q-tbs2910.dtb to enable booting mainline kernels otherwise with extlinux.conf it tries to load mx6-tbs2910.dtb instead. With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, we have the following size differences: - text: +2041 bytes - data: 0 bytes - bss: 0 bytes - total: +2041 bytes Signed-off-by: Denis 'GNUtoo' Carikli <[email protected]> Reviewed-by: Soeren Moch <[email protected]>
2020-06-12board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfigDenis 'GNUtoo' Carikli
This doesn't affect the size of the image: with arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola GNU/Linux distribution, the text, data, bss and total sizes remain unchanged. Signed-off-by: Denis 'GNUtoo' Carikli <[email protected]> Reviewed-by: Soeren Moch <[email protected]>
2020-06-11dm: uclass: don't assign aliased seq numbersMichael Walle
If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Alex Marginean <[email protected]> Tested-by: Alex Marginean <[email protected]> Acked-by: Vladimir Oltean <[email protected]> Reviewed-by: Simon Glass <[email protected]> Tested-by: Michal Simek <[email protected]> [on zcu102-revA]
2020-06-11arm: Remove pcm051 boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Lars Poeschel <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2020-06-11arm: Remove omap3_pandora_defconfig boardJagan Teki
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2020-06-11spi: davinci: Drop non-dm codeJagan Teki
Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford <[email protected]> Signed-off-by: Jagan Teki <[email protected]> Tested-by: Adam Ford <[email protected]> #da850-evm
2020-06-11ks2_evm: Switch to DM_SPL, SPL_OF_CONTROLJagan Teki
This would make SPL build to DM_SPL, SPL_OF_CONTROL. Build fine with but not tested. Cc: Vitaly Andrianov <[email protected]> Signed-off-by: Jagan Teki <[email protected]>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-08imx: imx8mp_evk: fix boot issuePeng Fan
The u-boot-spl.bin pad with ddr firmware conflicts with the CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten by malloc in SPL stage and cause ddr initialization not able to finish. So update the related addresses to fix the issue. Reported-by: Fabio Estevam <[email protected]> Signed-off-by: Peng Fan <[email protected]> Signed-off-by: Fabio Estevam <[email protected]>
2020-06-08imx: Update MTD partitions layout for display5 (i.MX6Q) boardLukasz Majewski
This change updates the MTD partition layout on SPI-NOR memory for display5 board. Signed-off-by: Lukasz Majewski <[email protected]>
2020-06-07rockchip: rockpro64: Store default env into SPIMarcin Juszkiewicz
Board has flash chip on board so let store U-Boot environment there. Signed-off-by: Marcin Juszkiewicz <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-06-07roc-rk3399-pc: Mark default env from SPIJagan Teki
Mark the default U-Boot environment as SPI flash since this is an on board flash device. Updated env offset, size in contrast with default since the U-Boot proper has to start from 384K. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2020-06-04Convert CONFIG_BOARD_LATE_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_BOARD_LATE_INIT Signed-off-by: Tom Rini <[email protected]>
2020-06-04Convert CONFIG_CMD_ASKENV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_CMD_ASKENV CONFIG_CMD_BMP CONFIG_CMD_BOOTD CONFIG_CMD_CACHE CONFIG_CMD_CRC32 CONFIG_CMD_DHCP CONFIG_CMD_ENV CONFIG_CMD_EXPORTENV CONFIG_CMD_EXT2 CONFIG_CMD_EXT4 CONFIG_CMD_FLASH CONFIG_CMD_FS_GENERIC CONFIG_CMD_FUSE CONFIG_CMD_GPIO CONFIG_CMD_GPT CONFIG_CMD_GREPENV CONFIG_CMD_I2C CONFIG_CMD_IMLS CONFIG_CMD_IMPORTENV CONFIG_CMD_LOADB CONFIG_CMD_LOADS CONFIG_CMD_MEMINFO CONFIG_CMD_MII CONFIG_CMD_MTDPARTS CONFIG_CMD_NAND CONFIG_CMD_NAND_TRIMFFS CONFIG_CMD_NFS CONFIG_CMD_PCA953X CONFIG_CMD_PCA953X_INFO CONFIG_CMD_PCI CONFIG_CMD_PING CONFIG_CMD_READ CONFIG_CMD_SF CONFIG_CMD_SPI CONFIG_CMD_SPL CONFIG_CMD_SPL_WRITE_SIZE CONFIG_CMD_TIME CONFIG_CMD_TRACE CONFIG_CMD_UBI CONFIG_CMD_UBIFS CONFIG_CMD_UNZIP CONFIG_FS_EXT4 Signed-off-by: Tom Rini <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-08-04 16:05:54 +0000