summaryrefslogtreecommitdiff
path: root/include/configs
AgeCommit message (Collapse)Author
2023-02-06ti: j721e_evm: Add USB to the default boot orderTom Rini
This family of platforms typically has a USB port, and so attempting to boot from it, and making it first, will provide a better overall user experience. Signed-off-by: Tom Rini <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: enable protected EnvironmentHeiko Schocher
enable protected Environment on socrates board. Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: drop second flash bankHeiko Schocher
drop second flash bank, as not used anymore. Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: add initrd_high default environment variableHeiko Schocher
we need to set initrd_high to get fitimage booting. Without, U-Boot drops when booting fitimage: ERROR: Failed to allocate 0x59a0b6 bytes below 0x800000. ramdisk - allocation error bootm - boot application image from memory Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06powerpc/mpc85xx: socrates: add MTD partitioning supportHeiko Schocher
setup MTD partitioning through mtdparts variable and set it to: mtdparts=fe0000000.nor:13312k(system1),13312k(system2),5120k(data),128k(env),128k(env-red),768k(u-boot) and pass this to linux per kernel commandline. Signed-off-by: Heiko Schocher <[email protected]>
2023-02-06km/ppc832x: join config filesHolger Brunck
There are no differences for the different 832x targets we have in the header defined with SYS_CONFIG_NAME. So we can join the five headers to a single file. Signed-off-by: Holger Brunck <[email protected]>
2023-02-06km/ppc: remove km-mpc8360.h and km-mpc832x.hHolger Brunck
Next step to get rid of the header files in icnlude/configs. Move most of the defines to km83xx.c directly. Some remaining defines which should go to Kconfig are moved to km-mpc83xx.h for now. Also remove some unused defines and move one define to powerpc.env as we only need it there. Signed-off-by: Holger Brunck <[email protected]>
2023-02-06include: configs: am62x_evm: Add .env file for Am62xNikhil M Jain
Use .env file for setting board related environment variables, in place of am62x_evm.h file. Except for BOOTENV settings, as config_distro_boot.env file doesn't exist. Signed-off-by: Nikhil M Jain <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-02-03udoo_neo: Move to DM for REGULATOR/PMIC/I2C driversPeter Robinson
This moves over the PMIC power init to DM and the associated i2c and regulator bits. Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-02-02Merge commit 'refs/pipelines/15015' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-tegra
2023-02-02ARM: tegra: include timer as default optionSvyatoslav Ryhel
Enable TIMER and TEGRA_TIMER for TEGRA_ARMV7_COMMON and TEGRA210. Additionally enable SPL_TIMER if build as SPL part and drop deprecated configs from common header. Signed-off-by: Svyatoslav Ryhel <[email protected]> Reviewed-by: Simon Glass <[email protected]> Signed-off-by: Tom <[email protected]>
2023-02-02Merge https://source.denx.de/u-boot/custodians/u-boot-riscvTom Rini
2023-02-01Merge tag 'u-boot-imx-20230201' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx For 2023.04 ----------- - several conversion to DM_SERIAL and DM_I2C - fixes for Toradex boards - PSCI CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/14965
2023-02-01board: sifive: unmatched: enable booting on a second NVME deviceAurelien Jarno
The HiFive Unmatched board has a M2 slot for NVME and a PCIe slot that can also be used for NVME. Enable support for a second NVME device, so that software RAID-1 configurations can be supported at the u-boot level. Signed-off-by: Aurelien Jarno <[email protected]> Reviewed-by: Heinrich Schuchardt <[email protected]>
2023-01-31configs: imx8mp_evk: revert to old ram settingsManoj Sai
The 'commit 864ac2cf383e ("board: imx8mp: Add Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit")' has changed the imx8mp evk ram settings from 6GB ram to 2GB. This changeset reverts the above change. Signed-off-by: Manoj Sai <[email protected]> Reported-by : Peter Bergin <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-31Merge tag 'u-boot-amlogic-20230131' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - jethub j100: add rescue boot from microSD - move meson sm command to cmd/meson and add efusedump sub-command - switch dwc2 otg to DM for G12A, GXL & AXG - Add new boards: - Odroid Go Ultra - Odroid-N2L
2023-01-31include/configs: mx6/mx7: drop dangling commentsPeter Robinson
Cleanup some dangling comments left by automated migration processes that are no longer value. Signed-off-by: Peter Robinson <[email protected]> Acked-by: Peng Fan <[email protected]>
2023-01-31pico-imx7d: Convert to DM_I2C and DM_PMICFabio Estevam
The conversion to DM_I2C is mandatory, so convert to it and also to DM_PMIC. Signed-off-by: Fabio Estevam <[email protected]>
2023-01-30imx8mm-phg: Add board supportFabio Estevam
Add the board support for the i.MX8MM Cloos PHG board. This board uses a imx8mm-tqma8mqml SoM from TQ-Group. imx8mm-phg.dts and imx8mm-tqma8mqml.dtsi are taken directly from Linux 6.2-rc3. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-01-30apalis-imx8: add M4 boot environment helpersAndrejs Cainikovs
Add M4 boot environment functions for reference. Signed-off-by: Andrejs Cainikovs <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: update env memory layoutMarcel Ziswiler
Update the distro config env memory layout for the Apalis iMX8 aka QuadMax: - kernel_comp_addr_r=0xf0000000 temporary area for uncompressing (ie FIT images or Image.gz booted using booti) - kernel_comp_size=0x08000000 - loadaddr=0x95400000 avoiding any reserved areas located before that - fdt_addr_r = loadaddr + 128MB - allows for 128MB kernel - scriptaddr = fdt_addr_r + 512KB - allows for 512KB fdt - ramdisk_addr_r = scriptaddr + 512KB - allows for 512KB script Basic idea of memory layout taken from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout"). However, moved past any reserved areas to avoid any kind of conflicts. Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot). Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: update update_uboot confirmation messageMarcel Ziswiler
Update update_uboot confirmation message. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: drop obsolete environment variablesMarcel Ziswiler
Drop obsolete environment variables fdt_addr, finduuid, boot_file, mmcargs, mmcdev, mmcpart and panel. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Andrejs Cainikovs <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: remove obsolete net usb startMarcel Ziswiler
Remove obsolete net USB start. While at it also add a comment about enabling distro-boot. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: remove obsolete sdhc related config definesMarcel Ziswiler
Remove obsolete SDHC related config defines. Nowadays, all SDHC related hardware configuration comes from the device tree. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: introduce setup setting setupargsMarcel Ziswiler
Introduce setup setting setupargs and move earlycon there. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis/colibri-imx8/8x: remove global variable scriptOleksandr Suvorov
The distroboot script system scans boot_scripts variable and try to find and use to boot each script name mentioned there. Setting global variable "script" breaks this general mechanism of searching and running a distro boot script. Remove global variables "script" to fix working the general distro boot script mechanism. Signed-off-by: Oleksandr Suvorov <[email protected]> Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-30apalis-imx8: implement pcb version and soc variant handlingMarcel Ziswiler
Implement PCB version and SoC variant handling which automatically loads the correct device tree for the Linux kernel. Signed-off-by: Marcel Ziswiler <[email protected]> Signed-off-by: Andrejs Cainikovs <[email protected]> Signed-off-by: Francesco Dolcini <[email protected]> Reviewed-by: Fabio Estevam <[email protected]>
2023-01-27include: configs: Update env for selecting right dtbSinthu Raja
Now that single defconfig shall be used for booting J721S2 EVM and AM68 SK, the default device tree will not work for selecting dtb for kernel. Update the findfdt env to select right dtb based on board_name env variable. Signed-off-by: Sinthu Raja <[email protected]> Reviewed-by: Tom Rini <[email protected]>
2023-01-27Merge tag 'xilinx-for-v2023.04-rc1' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx chnages for v2023.04-rc1 makefile: - Add multi_dtb_fit dependency clk: - Handle error cases microblaze: - Disable falcon mode and cleanup code around xilinx: - Enable regular expression matching in board_fit_config_name_match() - Fix FRU handling for 0xC1 format - Fix Xilinx legacy format eeprom parsing zynqmp: - Some DT updates/cleanups - Fix IDcode for xck24 - Remove empty mini config files - Add support for k24 versal: - Remove empty mini config files versal_net: - Setup timer when runs in EL3 - Build u-boot.elf for mini configurations zynq-gem: - Add support for new compatible strings - Remove support for Avnet Ultrazedev SOM - Handle SGMII with PCS phy spi: - Add support for gigadevice parts misc: - Remove CONFIG_TARGET_VENUS ifdef - Add missing headers to remove sparse warnings
2023-01-24Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
This contains some fixes, and the first bunch of some clean up patches to get rid of legacy GPIO and PMIC code. Highlight is the DM AXP PMIC driver, which is required to convert some drivers over to use DM regulators, and also is required to get rid of some less optimal PMIC setup code in Trusted Firmware. This isn't enabled by any defconfig yet, but can be enabled manually and works. For the full glory some patches are still missing, and this requires more testing, which would be simpler if the core code is upstream.
2023-01-24arm64: versal: Remove xilinx_versal_mini_qspi.h configsMichal Simek
The commit eaf6ea6a1dc1 ("Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h") moved custom init stack pointer address to Kconfig which ends up in situation that xilinx_versal_mini_qspi.h is not needed anymore. That's why remove the file and move defconfigs directly to xilinx_versal_mini.h configuration. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/2d7276ab8d4cb1d245b64287fb59c79325513f22.1674041200.git.michal.simek@amd.com
2023-01-24arm64: zynqmp: Remove xilinx_zynqmp_mini_emmc/qspi.h configsMichal Simek
The commit eaf6ea6a1dc1 ("Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.h") moved custom init stack pointer address to Kconfig which ends up in situation that xilinx_zynqmp_mini_emmc/qspi.h are not needed anymore. That's why remove files and move defconfigs directly to xilinx_zynqmp_mini.h configuration. Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/61ae40cf63aabd08adb386c870d3392b0b606fc9.1674040373.git.michal.simek@amd.com
2023-01-23rockchip: Convert rockpro64-rk3399 to use standard bootSimon Glass
Drop the use of scripts and rely on standard boot for all operation. Signed-off-by: Simon Glass <[email protected]> Reviewed-by: Kever Yang <[email protected]>
2023-01-21sunxi: h616: lower SPL stack address to avoid BROM dataAndre Przywara
When using the USB OTG FEL mode on the Allwinner H616, the BootROM stores some data at the end of SRAM C. This is also the location where we place the initial SPL stack, so it will overwrite this data. We still need the BROM code after running the SPL, so should leave that area alone. Interestingly this does not seem to have an adverse effect, I guess on the "way out" (when we return to FEL after the SPL has run), this data is not needed by the BROM, for just the trailing end of the USB operation. However this is still wrong, and we should not clobber BROM data. Lower the SPL stack address to be situated right below the swap buffers we use in sunxi-fel: that should be out of the way of everyone else. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Samuel Holland <[email protected]> Tested-by: Samuel Holland <[email protected]>
2023-01-18odroid: limit boot memory to lowmemJoost van Zwieten
In commit 4963f63fe61f ("image: Use gd->ram_base/_size in env_get_bootm_size()") the size of the available memory for U-Boot to use when relocating images, and not otherwise constrained, was changed to include all known memory banks. In the case of this platform however, all of the memory known to U-Boot is not also part of the Linux kernel "lowmem" and so we must use CFG_SYS_BOOTMAPSZ to limit where we relocate images to. We set a conservative limit of 256MB here to mirror the previous behavior. Signed-off-by: Joost van Zwieten <[email protected]> [trini: Reword the commit messsage] Signed-off-by: Tom Rini <[email protected]>
2023-01-16rockchip: add support for PX30 Ringneck SoM on Haikou DevkitQuentin Schulz
The PX30-µQ7 (Ringneck) is a system-on-module featuring the Rockchip PX30 in a micro Qseven-compatible form-factor. PX30-µQ7 features: * CPU: quad-core Cortex-A35 * DRAM: 2GB dual-channel * eMMC: onboard eMMC * SD/MMC * TI DP83825I 10/100Mbps PHY * USB: * USB2.0 dual role port * 3x USB2.0 host via onboard USB2.0 hub * Display: MIPI-DSI * Camera: MIPI-CSI * onboard 2.4GHz WiFi + Bluetooth module * Companion Controller: on-board additional microcontroller (STM32 Cortex-M0 or ATtiny): * RTC * fan controller * CAN (only STM32) The non-U-Boot DTS files are imported from Linux v6.2-rc2. Cc: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Quentin Schulz <[email protected]>
2023-01-16rockchip: px30: fix CFG_IRAM_BASEQuentin Schulz
The IRAM on PX30 (or Int_MEM in datasheet) starts at 0xff0e0000 and not 0xff020000 as rightfully stated in the FIXME comment. Let's fix it so that BROM_BOOTSOURCE_ID_ADDR points to the correct address for PX30. Fixes: 46281a76bee3 ("rockchip: add core px30 headers") Cc: Quentin Schulz <[email protected]> Reviewed-by: Kever Yang <[email protected]> Signed-off-by: Quentin Schulz <[email protected]>
2023-01-16rockchip: Add initial support for the PINE64 Pinephone ProPeter Robinson
The Pinephone Pro is another device by PINE64. It's closely related to the Pinebook Pro of which this initial support is derived from. Specification: - A variant of the Rockchip RK3399 - A 6 inch 720*1440 DSI display - Front and rear cameras - Type-C interface with alt mode display (DP 1.2) and PD charging - 4GB LPDDR4 RAM - 128GB eMMC - mSD card slot - An AP6255 module for 802.11ac WiFi and Bluetooth 5 - Quectel EG25-G 4G/LTE modem Signed-off-by: Peter Robinson <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2023-01-16board: rockchip: Add Edgeble Neu2 IO BoardJagan Teki
Neural Compute Module 2(Neu2) IO board is an industrial form factor IO board from Edgeble AI. General features: - microSD slot - MIPI DSI connector - 2x USB Host - 1x USB OTG - Ethernet - mini PCIe - Onboard PoE - RS485, RS232, CAN - Micro Phone array - Speaker - RTC battery slot - 40-pin expansion Neu2 needs to mount on top of this IO board in order to create complete Edgeble Neural Compute Module 2(Neu2) IO platform. Add support for it. Signed-off-by: Jagan Teki <[email protected]>
2023-01-16arm: rockchip: Add RV1126 arch core supportJagan Teki
Rockchip RV1126 is a high-performance vision processor SoC for IPC/CVR, especially for AI related application. Add arch core support for it. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Kever Yang <[email protected]> Reviewed-by: Kever Yang <[email protected]> Change-Id: I22fde40ec375e3c6aba39808abf252edc45d4b04
2023-01-10board: starqltechn: enable serial consoleDzmitry Sankouski
It was temporary disabled due to problem with boot. Issue was fixed in commit f5ed6c9ccf3e ("uart: sdm845: Fix debug UART pinmux") Signed-off-by: Dzmitry Sankouski <[email protected]>
2023-01-10configs: am62a: use kernel fitImage when using secure bootflowBryan Brattlof
In order to maintain the chain of trust, each stage of the boot process will first authenticate each binary it loads before continuing. To extend this to the kernal and its dtbs we can package the kernal and its dtbs into another fitImage for Uboot to authenticate and extend the chain of trust all the way to the kernel. When 'boot_fit' is set, indicating we're using the secure bootflow, look for and authenticate the kernel's fitImage. Signed-off-by: Judith Mendez <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]>
2023-01-10configs: am62a: convert bootcmd to distro_bootcmdBryan Brattlof
We're currently using CONFIG_BOOTCOMMAND to run custom boot scripts to jump into linux. While this works, let's begin the transition to more distribution friendly jumps to linux by enabling distro_bootcmd. Convert the custom bootcmd to a distro_bootcmd Signed-off-by: Judith Mendez <[email protected]> Signed-off-by: Bryan Brattlof <[email protected]>
2023-01-10configs: Enable distroboot on am625Martyn Welch
TI boards use a custom (though faily common to TI boards) mechanism for booting Linux. We would like to use the "distroboot" approach. Enable distroboot as a further option to use for booting on am625 should the existing options fail. Signed-off-by: Martyn Welch <[email protected]>
2023-01-10board: amlogic: jethub j100: add rescue boot from microSDViacheslav Bocharov
The new JetHub D1+ has a microSD slot. Add rescue boot from microSD Signed-off-by: Viacheslav Bocharov <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]>
2023-01-09Merge branch 'next'Tom Rini
Signed-off-by: Tom Rini <[email protected]>
2023-01-06vexpress: adjust loadaddrHeinrich Schuchardt
On the vexpress_ca9x4 $loadaddr points to a memory area used by the EFI sub-system. Use the same value as $kernel_addr_r which is safe. Signed-off-by: Heinrich Schuchardt <[email protected]>
2023-01-06Merge tag 'u-boot-at91-2023.04-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2023.04 cycle: This feature set includes the new DM-based NAND flash driver (old non-DM driver is still kept for backwards compatibility), and the move to DM NAND flash driver for sam9x60ek board. Feature set also includes devicetree alignment for sama7g5 with Linux, devicetree alignment on USB with Linux for all boards (sama5, sam9x60), chip id for sama7g5, minor configs and tweaks.
2023-01-02arm: s5p4418: dm_serial: remove old code / add DEBUG_UARTStefan Bosch
Remove init of UART-clock and UART-reset in arch_cpu_init(). Add DEBUG_UART to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-06-04 05:25:10 +0000