| Age | Commit message (Collapse) | Author |
|---|
|
Richard Genoud <[email protected]> says:
SquashFS has support in U-Boot, but not in SPL.
This series adds the possibility for the SPL to load files from SquashFS
partitions.
This is useful, for instance, when there's a SquashFS rootfs containing
U-Boot binary.
NB: falcon mode is not supported yet.
Link: https://lore.kernel.org/r/[email protected]
|
|
Implement spl_load_image_sqfs() in spl code.
This will be used in MMC to read a file from a squashfs partition.
Also, loosen squashfs read checks on file size by not failing when a
bigger size than the actual file size is requested. (Just read the file)
This is needed for FIT loading, because the length is ALIGNed.
Signed-off-by: Richard Genoud <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Reviewed-by: João Marcos Costa <[email protected]>
|
|
Refactor the part_get_info_extended() helper function (which already
recursively traverses DOS partitions) to optionally return the raw MBR
partition structure (dos_partition_t).
This allows other subsystems, such as EFI, to retrieve the partition
details in the legacy MBR format.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-socfpga into next
This pull request brings together a set of fixes and enhancements across
the SoCFPGA platform family, with a focus on MMC/SPL robustness, EFI
boot enablement, and Agilex5 SD/eMMC support.
CI: https://source.denx.de/u-boot/custodians/u-boot-socfpga/-/pipelines/28776
Highlights:
*
SPL / MMC:
o
Fix Kconfig handling for
SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE
o
Correct raw sector calculations and respect explicit sector values
when loading U-Boot from MMC in SPL
o
Adjust raw MMC loading logic for SoCFPGA platforms
*
EFI boot:
o
Permit EFI booting on SoCFPGA platforms
o
Disable mkeficapsule tool build for Arria 10 where unsupported
*
Agilex5:
o
Upgrade SDHCI controller from SD4HC to SD6HC
o
Enable MMC and Cadence SDHCI support in defconfig
o
Add dedicated eMMC device tree and defconfig for Agilex5 SoCDK
o
Revert incorrect GPIO configuration for SDIO_SEL
o
Refine U-Boot DT handling for SD and eMMC boot variants
*
SPI:
o
Allow disabling the DesignWare SPI driver in SPL via Kconfig
*
Board / configuration fixes:
o
Enable random MAC address generation for Cyclone V
o
Fix DE0-Nano-SoC boot configuration
o
Remove obsolete or conflicting options from multiple legacy
SoCFPGA defconfigs
|
|
choice
Add SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE as condition where so
far SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was enough - though often
by chance as both options were enabled.
Reorder the #ifdef blocks at this chance to follow the order in the
Kconfig menu.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Tien Fong Chee <[email protected]>
|
|
successful get_info
Not all ->get_info implementations necessarily populate all the string
members of struct disk_partition.
Currently, only part_get_info_by_type() (and thereby part_get_info)
ensure that the uuid strings are initialized; part_get_info_by_type()
and part_get_info_by_uuid() do not. In fact, the latter could lead to
a false positive match - if the ->get_info backend does not populate
info->uuid, stale contents in info could cause the strncasecmp() to
succeed.
None of the functions currently ensure that the ->name and ->type
strings are initialized.
Instead of forcing all callers of any of these functions to
pre-initialize info, or all implementations of the ->get_info method
to ensure there are valid C strings in all four fields, create a small
helper function and factor all invocations of ->get_info through that.
This also consolidates the -ENOSYS check and standardizes on using
log_debug() for reporting absence, instead of the current mix of
PRINTF and log_debug(). It does mean we have to special-case -ENOSYS
in the error cases inside the loops in the _by_uuid() and _by_name()
functions, but it's still a net win in #LOC.
Acked-by: Quentin Schulz <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
Tested-by: Anshul Dalal <[email protected]>
|
|
Make part_driver_lookup_type non-static so it can be used outside
part.c. This allows external callers to determine the appropriate
partition driver for a block device, enabling more flexible handling of
partition types.
Add a prototype and kernel-doc comment in part.h to document the
function contract. Provide a stub inline implementation returning NULL
when partition support is disabled, ensuring build consistency across
configurations.
Signed-off-by: Javier Tia <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
This file does not need <linker_lists.h> so remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
This function will be used by the EFI application disk support code
to provide data required by the EFI_PARTITION_INFORMATION_PROTOCOL.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Tom Rini <[email protected]> says:
Hey all,
Related to my other series I've posted recently on cleaning up some
headers, this series here is the result of at least lightly auditing the
#includes used in include/[a-m]*.h. This ignores subdirectories, as at
least in part I think the top-level includes we've constructed are the
most likely places to have some extra transitive include paths. I'm sure
there's exceptions and I'll likely audit deeper once this first pass is
done. This only gets as far as "include/m*.h" because I didn't want this
to get too big. This also sets aside <miiphy.h> and <phy.h>. While
miiphy.h does not directly need <phy.h> there are *so* many users and I
think I had half of the tree just about not building when I first tried.
It might be worth further investigation, but it might just be OK as-is.
Link: https://lore.kernel.org/r/[email protected]
|
|
At this point in time, <ide.h> provides the IDE_BUS macro and the
function prototype for ide_set_reset, which is used with IDE_RESET. The
only files which should include this header are the ones that either use
that macro or that function. Remove <blk.h> from <ide.h> and remove
<ide.h> from places which do not need it.
Signed-off-by: Tom Rini <[email protected]>
|
|
Add function to search for a partition by UUID as partition
names may not be unique.
Signed-off-by: Varadarajan Narayanan <[email protected]>
Acked-by: Casey Connolly <[email protected]>
|
|
GPT partition tables include two bytes worth of vendor defined
attributes, per partition. ChromeOS and Qualcomm both use these (with
different encoding!) to handle A/B slot switching with a retry counter.
Expose these via the disk_partition struct so that they can be parsed by
the relevant board code.
This will be used on Qualcomm boards to determine which slot we're
booting on so that we can flash capsule updates to the correct one.
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <[email protected]>
|
|
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
UBI partition is abstraction over UBI volumes.
Can be used by UBI block device.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Add new MTD partition driver, which can be useful with
mtdblock driver combination.
Signed-off-by: Alexey Romanov <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
We have to use 'Return:' to render the description of the return value in
the HTML documentation.
Fixes: f55aa4454ac3 ("part: Add a fallback for part_get_bootable()")
Fixes: dcffa4428d03 ("part: Add a function to find the first bootable partition")
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Rename disk_partition_type_uuid to disk_partition_type_guid.
Provide function descriptions for the getter and setter.
Fixes: bcd645428c34 ("part: Add accessors for struct disk_partition type_uuid")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
This function can be called when partition support is disabled. Add a
static inline to handle this.
Signed-off-by: Simon Glass <[email protected]>
|
|
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add an accessor. Update the only usage.
Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.
Signed-off-by: Simon Glass <[email protected]>
|
|
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add accessors. Update all code to use it.
Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.
Signed-off-by: Simon Glass <[email protected]>
|
|
This field is only present when a CONFIG is set. To avoid annoying #ifdefs
in the source code, add accessors. Update all code to use it.
Note that the accessor is optional. It can be omitted if it is known that
the option is enabled.
Signed-off-by: Simon Glass <[email protected]>
|
|
The dev_ prefix is a hangover from the pre-driver model days. The device
is now a different thing, with driver model. Update the partition code to
just use 'desc', as is done with driver model.
Signed-off-by: Simon Glass <[email protected]>
|
|
Move part_create_block_devices() to blk uclass and unexpose
the function. This can now be internal to the block uclass.
Signed-off-by: Marek Vasut <[email protected]>
|
|
* Convert comments in part.h to Sphinx style.
* Create documentation page for the partition API.
* Add the partition API page to the API index page.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Since commit 56670d6fb83f ("disk: part: use common api to lookup part
driver") part_get_info_by_name_type() ignores the part_type parameter
used to restrict the partition table type.
omap_mmc_get_part_size() and part_get_info_by_name() are the only
consumers.
omap_mmc_get_part_size() calls with part_type = PART_TYPE_EFI because at
the time of implementation a speed up could be gained by passing the
partition table type. After 5 years experience without this restriction
it looks safe to keep it that way.
part_get_info_by_name() uses PART_TYPE_ALL.
Move the logic of part_get_info_by_name_type() to part_get_info_by_name()
and replace the function in omap_mmc_get_part_size().
Fixes: 56670d6fb83f ("disk: part: use common api to lookup part driver")
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Adds part_driver_get_type() API which can be used to force a specific
driver to be used when getting partition information instead of relying
on auto detection.
Signed-off-by: Joshua Watt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Some devices have multiple partition types available on the same media.
It is sometimes useful to see these to check that everything is working
correctly.
Provide a way to manually set the partition-table type, avoiding the
auto-detection process.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
|
|
If a disk has a bootable partition we are expected to use it to locate the
boot files. Add a function to find it.
To test this, update mmc1 to have two paritions, fixing up other tests
accordingly.
Signed-off-by: Simon Glass <[email protected]>
|
|
Use the uclass type as the first part of the function name, to be
consistent with the methods in other block drivers.
Signed-off-by: Simon Glass <[email protected]>
|
|
If a gpt table is corrupted (after a power cut
for example), then the gpt table should repaired.
The function gpt_repair_headers check if at least
one gpt table is valid, and then only write the
corrupted gpt table.
Signed-off-by: Philippe Reynes <[email protected]>
|
|
In include/blk.h, Simon suggested:
===>
/*
* These functions should take struct udevice instead of struct blk_desc,
* but this is convenient for migration to driver model. Add a 'd' prefix
* to the function operations, so that blk_read(), etc. can be reserved for
* functions with the correct arguments.
*/
unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, void *buffer);
unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt, const void *buffer);
unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
lbaint_t blkcnt);
<===
So new interfaces are provided with this patch.
They are expected to be used everywhere in U-Boot at the end.
The exceptions are block device drivers, partition drivers and efi_disk
which should know details of blk_desc structure.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
NOTE: probably we have to update config dependencies,
in particular, SPL/TPL_PRINTF?
With this new function, UCLASS_PARTITION devices will be created as
child nodes of UCLASS_BLK device.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Since host_get_dev_errr() is defined in drivers/block/sandbox.c,
the associated function prototype should be in a more appropriate
header file.
Fixes: commit 4101f6879256 ("dm: Drop the block_dev_desc_t typedef")
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Some defconfig enables CMD_PART even if none of any partition table
types (CONFIG_*_PARTITION) are enabled.
This will lead to the size growth in SPL/TPL code since disk/part.c
will be compiled in any way.
We will change disk/Kconfig later so that CONFIG_PARTITIONS is only
enabled when, at least, one of CONFIG_*_PARTITION is enabled.
To make the build work (in particular, "part" command) correctly,
a few functions should be defined as void functions in case of
!CONFIG_PARTITIONS.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Since CONFIG_[SPL|TPL]_PARTITIONS were introduced, part.h has not been
updated. Due to this, while the build won't fail, some functionality may
possibly break as some partition-related functions are nullified even
though some partition table types are enabled for SPL/TPL.
Fixes: commit 88ca8e26958b ("disk: Add an option for partitions in SPL")
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Some errno numbers are used in defining inline functions.
So "errno.h" should be explicitly included to avoid possible build errors.
Signed-off-by: AKASHI Takahiro <[email protected]>
|
|
Sphinx expects Return: and not @return to indicate a return value.
find . -name '*.c' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
find . -name '*.h' -exec \
sed -i 's/^\(\s\)\*\(\s*\)@return\(\s\)/\1*\2Return:\3/' {} \;
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
A GPT partition table typically has 128 entries. If a partition table
contains a partition 128 'part list' should be able to list it.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
|
|
This allows using dev#partlabel syntax.
Signed-off-by: Sean Anderson <[email protected]>
|
|
This adds an option to part_get_info_by_dev_and_name_or_num to allow
callers to specify whether whole-disk partitions are fine.
Signed-off-by: Sean Anderson <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Add eMMC and GPT support.
- GPT partition list and command to create the GPT added to u-boot
environment
- eMMC boot commands added to u-boot environment
- new gpt commands (enumarate and setenv) that are used by broadcom
update scripts and boot commands
- eMMC specific u-boot configurations with environment saved in eMMC
and GPT support
Signed-off-by: Corneliu Doban <[email protected]>
Signed-off-by: Rayagonda Kokatanur <[email protected]>
[trini: Make gpt_setenv initialize ret to -1, given relevant return
error values]
Signed-off-by: Tom Rini <[email protected]>
|
|
Add a code for creating and writing MBR partition layout. The code generates
similar layout of EBRs (Exteneded Block Records) and logical volumes as
Linux's fdisk utility.
Signed-off-by: Marek Szyprowski <[email protected]>
|
|
write_mbr_partition() function name is a bit misleading, so rename it to
write_mbr_sector(). This is a preparation for adding code for writing a
complete MBR partition layout.
Signed-off-by: Marek Szyprowski <[email protected]>
|
|
We should not be using typedefs and these make it harder to use
forward declarations (to reduce header file inclusions). Drop the typedef.
Signed-off-by: Simon Glass <[email protected]>
|
|
Up to now for MBR and GPT partitions the info field 'bootable' was set to 1
if either the partition was an EFI system partition or the bootable flag
was set.
Turn info field 'bootable' into a bit mask with separate bits for bootable
and EFI system partition.
This will allow us to identify the EFI system partition in the UEFI
sub-system.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This patch adds part_get_info_by_dev_and_name_or_num() function which
allows us to get partition info from its number or name. Partition of
interest is specified by string like "device_num:partition_number" or
"device_num#partition_name".
The patch was extracted from [1].
[1] https://android-review.googlesource.com/c/platform/external/u-boot/+/729880/2
Signed-off-by: Ruslan Trofymenko <[email protected]>
Signed-off-by: Igor Opaniuk <[email protected]>
Reviewed-by: Alistair Strachan <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
