summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2022-07-07Convert CONFIG_SYS_UNIFY_CACHE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_UNIFY_CACHE Signed-off-by: Tom Rini <[email protected]>
2022-07-07layerscape: Remove some unused CONFIG symbolsTom Rini
All of these symbols are not referenced anywhere else in the code, so remove them. Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-07usb: Remove some unused CONFIG settingsTom Rini
On platforms that use CONFIG_USB_OHCI_NEW we do not need to set CONFIG_SYS_USB_OHCI_REGS_BASE nor CONFIG_SYS_USB_OHCI_SLOT_NAME. Drop these from platforms that we can. Signed-off-by: Tom Rini <[email protected]>
2022-07-07usb: ohci-hcd: Remove some unused legacy codeTom Rini
At this point, the only user of ohci-hcd that also uses PCI is using DM, so we can drop CONFIG_PCI_OHCI* usage. No platforms set either of CONFIG_SYS_USB_OHCI_BOARD_INIT or CONFIG_SYS_USB_OHCI_CPU_INIT so those hooks can be removed as well. Signed-off-by: Tom Rini <[email protected]>
2022-07-07Convert CONFIG_USB_OHCI_NEW et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <[email protected]>
2022-07-07Convert CONFIG_USB_XHCI_EXYNOS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_XHCI_EXYNOS CONFIG_USB_EHCI_EXYNOS Signed-off-by: Tom Rini <[email protected]>
2022-07-06common: spl: spl_spi: add support for dynamic override of sf busVaishnav Achath
Currently the SPI flash to load from is defined through the compile time config CONFIG_SF_DEFAULT_BUS and CONFIG_SF_DEFAULT_CS, this prevents the loading of binaries from different SPI flash using the same build.E.g. supporting QSPI flash boot and OSPI flash boot on J721E platform is not possible due to this limitation. This commit adds lookup functions spl_spi_boot_bus() and spl_spi_boot_cs for identifying the flash device based on the selected boot device, when not overridden the lookup functions are weakly defined in common/spl/spl_spi.c. Signed-off-by: Vaishnav Achath <[email protected]> Reviewed-by: Heiko Schocher <[email protected]>
2022-07-05Convert CONFIG_KIRKWOOD_PCIE_INIT et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KIRKWOOD_EGIGA_INIT CONFIG_KIRKWOOD_PCIE_INIT CONFIG_KIRKWOOD_RGMII_PAD_1V8 CONFIG_KM_DISABLE_PCIE Signed-off-by: Tom Rini <[email protected]>
2022-07-05qemu-ppce500: Move CONFIG_SYS_PCI_MAP_{START, END} to board codeTom Rini
These CONFIG options are only used on this board, in the board file itself. Remove these from the CONFIG namespace and define in the board file. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCI_MSC01 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_MSC01 Signed-off-by: Tom Rini <[email protected]>
2022-07-05socrates: Rework CONFIG_PCI_CLK_FREQTom Rini
The symbol CONFIG_PCI_CLK_FREQ is local to this board. Provide equal clarity in the code by referencing the numeric value directly and move the explanatory comment to the code, just prior to use. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SH7751_PCI to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SH7751_PCI Signed-off-by: Tom Rini <[email protected]>
2022-07-05MPC837XERDB: Remove unused PCI definesTom Rini
These defines aren't referenced in code today, remove them. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCI_CONFIG_HOST_BRIDGE to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_CONFIG_HOST_BRIDGE Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCI_GT64120 to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_GT64120 Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCI_SCAN_SHOW to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCI_SCAN_SHOW Signed-off-by: Tom Rini <[email protected]>
2022-07-05pci: Remove pci_sh4 and related defines.Tom Rini
This driver is not enabled anywhere, remove it. Also remove definitions of symbols only used in this driver, on platforms that did not enable it. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCIE_IMX to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE_IMX Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_PCIE1 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PCIE1 CONFIG_PCIE2 CONFIG_PCIE3 CONFIG_PCIE4 CONFIG_PCI1 Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_LAYERSCAPE_NS_ACCESS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_LAYERSCAPE_NS_ACCESS Signed-off-by: Tom Rini <[email protected]>
2022-07-05lcd: Remove legacy CONFIG_FB_ADDR codeTom Rini
No platforms set both CONFIG_LCD and CONFIG_FB_ADDR at this time, drop this legacy code. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_FSL_FIXED_MMC_LOCATION et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_FIXED_MMC_LOCATION CONFIG_ESDHC_HC_BLK_ADDR Signed-off-by: Tom Rini <[email protected]>
2022-07-05powerpc: Clean up CHAIN_OF_TRUST related optionsTom Rini
As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05nxp: config_fsl_chain_trust.h: Clean up and remove unused portionsTom Rini
The way that secure boot is implemented today on NXP ARM platforms does not reuse the elements found in include/config_fsl_chain_trust.h to construct CONFIG_SECBOOT but instead board header files have their environment setup as needed and then fsl_setenv_chain_of_trust() will set secureboot in the environment. Remove a large number of unused defines here. Cc: Peng Fan <[email protected]> Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_SFP_BE et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_FSL_SEC_MON et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_ESDHC_DETECT_QUIRK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ESDHC_DETECT_QUIRK Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_EXTRA_CLOCK to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EXTRA_CLOCK Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_DDR_RAW_TIMING to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_DDR_RAW_TIMING Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SYS_SPD_BUS_NUM to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_SPD_BUS_NUM Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_USB_GADGET_DWC2_OTG_PHY to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_GADGET_DWC2_OTG_PHY Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_USE_ONENAND_BOARD_INIT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USE_ONENAND_BOARD_INIT Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_SAMSUNG_ONENAND to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SAMSUNG_ONENAND Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2022-07-05Rename CONFIG_PWM to CONFIG_PWM_S5P and move to KconfigTom Rini
We rename the S5P specific "CONFIG_PWM" to CONFIG_PWM_S5P and move it to Kconfig. Given the usage of CONFIG_PWM_NX, we have that select this new symbol. Cc: Jaehoon Chung <[email protected]> Cc: Minkyu Kang <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Jaehoon Chung <[email protected]>
2022-07-05smdkc100: Remove some unused optionsTom Rini
There are a few options we test and set and then never reference, remove them. Signed-off-by: Tom Rini <[email protected]>
2022-07-05nxp: Cleanup some emulator related options.Tom Rini
- Drop the emulator CONFIG test from include/configs/ls1088ardb.h - Migrate CONFIG_SYS_FSL_DDR_EMU to a select'able option in drivers/ddr/fsl/Kconfig Signed-off-by: Tom Rini <[email protected]>
2022-07-05watchdog: designware: Make this depend on WDTTom Rini
As this driver can dynamically determine the values set in CONFIG_DW_WDT_BASE when using WDT, so make this depend on WDT rather than migrate CONFIG_DW_WDT_BASE to Kconfig. Cc: Chee Tien Fong <[email protected]> Cc: Chin-Liang See <[email protected]> Cc: Dinh Nguyen <[email protected]> Cc: Holger Brunck <[email protected]> Cc: Ley Foon Tan <[email protected]> Cc: Marek Vasut <[email protected]> Cc: Siew Chin Lim <[email protected]> Cc: Stefan Roese <[email protected]> Cc: hee Hong Ang <[email protected]> Signed-off-by: Tom Rini <[email protected]> Reviewed-by: Stefan Roese <[email protected]>
2022-07-05Convert CONFIG_ENABLE_36BIT_PHYS to KconfigTom Rini
This converts the following to Kconfig: CONFIG_ENABLE_36BIT_PHYS Signed-off-by: Tom Rini <[email protected]>
2022-07-05net: designware: Rename CONFIG_DW_GMAC_DEFAULT_DMA_PBL to GMAC_DEFAULT_DMA_PBLTom Rini
This value is always used at the default, rename it for now. This likely should come from the device tree if non-default, moving forward. Signed-off-by: Tom Rini <[email protected]>
2022-07-05Convert CONFIG_DW_ALTDESCRIPTOR to KconfigTom Rini
This converts the following to Kconfig: CONFIG_DW_ALTDESCRIPTOR Signed-off-by: Tom Rini <[email protected]>
2022-07-05efi_loader: signature: export efi_hash_regions()AKASHI Takahiro
This function is used to calculate a message digest as part of authentication process in a later patch. Signed-off-by: AKASHI Takahiro <[email protected]>
2022-07-05lib: crypto: add mscode_parserAKASHI Takahiro
In MS authenticode, pkcs7 should have data in its contentInfo field. This data is tagged with SpcIndirectData type and, for a signed PE image, provides a image's message digest as SpcPeImageData. This parser is used in image authentication to parse the field and retrieve a message digest. Imported from linux v5.19-rc, crypto/asymmetric_keys/mscode*. Checkpatch.pl generates tones of warnings, but those are not fixed for the sake of maintainability (importing from another source). Signed-off-by: AKASHI Takahiro <[email protected]>
2022-07-03board: freescale: p1_p2_rdb_pc: Remove mapping for TDM-PMC cardPali Rohár
From whole P1/P2 family of RDB boards is TDM-PMC card (PCI Mezzanine Card, Freescale PQ-MDS-T1) available only on P1021RDB and P1025RDB boards. So address mapping for TDM-PMC card on LBC should not be enabled on any other P1/P2 RDB board as there is no device at that TDM-PMC address. Support for P1021RDB and P1025RDB boards was already removed from mainline U-Boot in commits 6d1dd76afe85 ("board/freescale: Remove P1021RDB board support") and d521cece5adb ("board/freescale: Remove P1025RDB board support"). So do not enable TDM-PMC address mapping on remaining P1/P2 RDB boards and remove all macros related to TDM-PMC address mappings. Signed-off-by: Pali Rohár <[email protected]>
2022-07-01Merge commit 'ef5ba2cef4a08b68caaa9215fcac142d3025bbf7' of ↵Tom Rini
https://github.com/tienfong/uboot_mainline
2022-07-01config: Add Chameleonv3 configPaweł Anikiel
Add defconfig and Kconfig files for Google Chameleon V3 board Signed-off-by: Paweł Anikiel <[email protected]> Reviewed-by: Simon Glass <[email protected]>
2022-06-30Merge tag 'u-boot-at91-2022.10-a' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-at91 into next First set of u-boot-at91 features for the 2022.10 cycle: This feature set includes mostly fixes and alignments: DT alignment with Linux for sama7g5, removal of invalid eeprom compatibles, removal of extra debug_uart_init calls for all at91 boards, support for pio4 driver pioE bank, and other minor fixes and enhancements for sam9x60 and sama5d2_icp boards.
2022-06-30Merge tag 'versal-qspi-for-v2022.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next Versal QSPI/OSPI changes for v2022.10 - Add new flash types - Add cadence ospi driver for Xilinx Versal
2022-06-29spi: cadence_qspi: Enable apb linear mode for apb read & write operationsT Karthik Reddy
On versal platform, enable apb linear mode for apb read and write execute operations amd disable it when using dma reads. This is done by xilinx_pm_request() secure calls when CONFIG_ZYNQMP_FIRMWARE is enabled, else we use direct raw reads and writes in case of mini U-Boot. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Ashok Reddy Soma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
2022-06-29spi: cadence-qspi: reset qspi flash for versal platformT Karthik Reddy
When flash operated at non default mode like DDR, flash need to be reset to operate in SDR mode to read flash ids by spi-nor framework. Reset the flash to the default state before using the flash. This reset is handled by a gpio driver, in case of mini U-Boot as gpio driver is disabled, we do raw read and write access by the registers. Versal platform utilizes spi calibration for read delay programming, so incase by default read delay property is set in DT. We make sure not to use read delay from DT by overwriting read_delay with -1. Signed-off-by: T Karthik Reddy <[email protected]> Signed-off-by: Ashok Reddy Soma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michal Simek <[email protected]>
generated by cgit v1.3.1 (git 2.54.0) at 2026-07-30 22:53:24 +0000