| Age | Commit message (Collapse) | Author |
|---|
|
|
|
When supporting partition reset for SoC such as i.MX95 , the Linux
Kernel may have configured the tuning, while after force reset by
wdog or else, uboot CMD0 will never pass unless config RSTT to reset
tuning logic.
Since RSTA and RSTT are independent, so need both to be reseted in the
controller.
Acked-by: Haibo Chen <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20241003
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/22516
DFU:
- Reinitialize only if dfu_alt_info changed
USB Gadget:
- New usb gadget driver for Renesas USBHS
- Simplify kconfig deps for CMD_USB_MASS_STORAGE
Android:
- Provide bootloader version to android via kernel commandline
|
|
Simon Glass <[email protected]> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot.
|
|
This doesn't describe the length parameter correctly. Fix it and
zunzip() too.
Signed-off-by: Simon Glass <[email protected]>
|
|
When bootstd is not enabled, bootdevs should not be set up. Add a
static inline function to see to this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Oliver Gaskell <[email protected]> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
|
|
Adds support for Analog Devices' SC573-EZKIT board. Includes:
- SoC specific configs in mach-sc5xx/Kconfig
- Memory Map for SPL
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC589-EZKIT board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC584-EZKIT board. Includes:
- SoC specific configs in mach-sc5xx/Kconfig
- Memory Map for SPL
- SPL config options in common/spl/Kconfig
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Trevor Woerner <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC594-SOM-EZKIT board. Includes:
- SoC specific configs in mach-sc5xx/Kconfig
- Memory Map for SPL
- SPL config options in common/spl/Kconfig
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Trevor Woerner <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Co-developed-by: Ian Roberts <[email protected]>
Signed-off-by: Ian Roberts <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
Adds support for Analog Devices' SC598-SOM-EZKIT board. Includes:
- CONFIG options common to all SC5xx SoCs
- SoC specific configs in mach-sc5xx/Kconfig
- SPL config options in common/spl/Kconfig
- Memory Map for SPL
- Necessary board-specific init functions
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Co-developed-by: Greg Malysa <[email protected]>
Signed-off-by: Greg Malysa <[email protected]>
Co-developed-by: Nathan Barrett-Morrison <[email protected]>
Signed-off-by: Nathan Barrett-Morrison <[email protected]>
Co-developed-by: Trevor Woerner <[email protected]>
Signed-off-by: Trevor Woerner <[email protected]>
Signed-off-by: Oliver Gaskell <[email protected]>
|
|
The primary upstream URL for tf-a has moved, in some cases
things like tags are not always pushed to the old URL so
update the URLs to the primary upstream project URL.
Signed-off-by: Peter Robinson <[email protected]>
|
|
Adds support for the secp521r1 ECDSA algorithm to mkimage.
Signed-off-by: Joakim Tjernlund <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Guillaume La Roque <[email protected]> says:
Ths patchset add support of Android 14 with boot image version 4
for :
- AM62X-SK EVM: https://www.ti.com/tool/SK-AM62B
- BeaglePlay: https://beagleplay.org/
- AM62PX-SK EVM: https://www.ti.com/tool/SK-AM62P-LP
Android Images use to test this series are on the Official TI website:
- AM62x/BeaglePlay: https://www.ti.com/tool/PROCESSOR-SDK-AM62X
- AM62PX: https://www.ti.com/tool/PROCESSOR-SDK-AM62P
|
|
Add Android bootflow support for AM62X SK EVM board with
new android boot method.
To build for AM62x for Android, we use the
am62x_a53_android.config fragment when building A53 bootloaders:
$ make am62x_evm_a53_defconfig
$ make am62x_a53_android.config
$ make
Co-developed-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Mattijs Korpershoek <[email protected]>
Signed-off-by: Guillaume La Roque <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Reviewed-by: Bryan Brattlof <[email protected]>
|
|
I'm trying to use dfu-util for bootstrapping an stm32mp board. It
mostly works fine, but something goes horribly wrong as soon as I make
use of the ability to run arbitrary u-boot shell commands. The shell
commands themselves work fine, but the heuristic "dfu_alt_info may
have changed, we have to reinit" seems to cause the board and/or my
host machine to go into some bad state, and further dfu-util commands
fail.
U-Boot already has a mechanism whereby C code can be told about
changes to specific environment variables. So instead of always doing
re-init, add a hook to the dfu_alt_info variable so that we only do
set dfu_reinit_needed if the commands actually did modify that
variable.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Both regulators_enable_boot_on/off() are unused and superseded by
regulator uclass regulator_post_probe(). Remove both functions.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This function is never called, drop it.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Prepare v2024.10-rc6
|
|
Jerome Forissier <[email protected]> says:
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
|
|
Prefix the flash status codes (ERR_*) with FL_ in order to avoid clashes
with third-party libraries. Case in point: including the lwIP library
header file <lwip/err.h> which defines err_enum_t as an enum with values
being ERR_*.
Signed-off-by: Jerome Forissier <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Peter Robinson <[email protected]>
|
|
In case the cyclic framework is enabled, poll the card detect of already
initialized cards and deinitialize them in case they are removed. Since
the card initialization is a longer process and card initialization is
done on first access to an uninitialized card anyway, avoid initializing
newly detected uninitialized cards in the cyclic callback.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The function name in the description must match the function.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Correct the description of the select.id member to fix a kernel-doc
warning.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
* Add missing function names.
* Align names used in descriptions with function names.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The name used in the function description must match the function.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The Sphinx documentation build process cannot handle the interspersed
'private:' and 'public:' comments. Remove them.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Added LMB API to prevent SF command from overwriting reserved
memory areas. The current SPI code does not use LMB APIs for
loading data into memory addresses. To resolve this, LMB APIs
were added to check the load address of an SF command and ensure it
does not overwrite reserved memory addresses. Similar checks are
used in TFTP, serial load, and boot code to prevent overwriting
reserved memory.
Signed-off-by: Prasad Kummari <[email protected]>
Suggested-by: Sughosh Ganu <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22363
- Several updates to i.MX9 SOC and i.MX93 EVK.
- Power domain fixes.
- TRDC cleanup and update.
- MAC address layout update.
- Add support for the i.MX9301/9302 variants.
- Add runtime detection of voltage mode.
- Generalize some code for i.MX8M and i.MX9.
- Add support for Comvetia imx6q-lxr board.
|
|
https://source.denx.de/u-boot/custodians/u-boot-tpm into next
This PR contains various improvements in the A/B update logic for EFI
- Read both copies of metadata, in case one of the is corrupted
- Check the metadata version against the running firmware to make sure it's
allowed
- Limit the use of a revert capsule if the board is on a trial state and
make sure it's not applied if the max counter has expired
|
|
The platform transitions out of Trial State into the Regular State
only when all the images in the update bank have been accepted. Check
for this condition before transitioning out of Trial State.
Signed-off-by: Sughosh Ganu <[email protected]>
Tested-by: Michal Simek <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add support for the Comvetia i.MX6Q LXR2 board, which is
uses the Phytec PFLA02 SoM.
Based on the original work from Stefano Babic <[email protected]>.
The Phytec PFLA02 devicetrees are taken from kernel 6.11-rc7.
The imx6q-lxr.dts has been submitted upstream:
https://lore.kernel.org/linux-devicetree/[email protected]/
After it gets accepted in mainline (most likely in kernel 6.13),
the lxr2 board can then be switched to OF_UPSTREAM and these device trees
can be removed from U-Boot.
Signed-off-by: Fabio Estevam <[email protected]>
|
|
1. Use runtime voltage selection for LD/OD/ND mode.
2. According to latest PE/TE report, the voltages of VDD_SOC for
LD and ND mode need add 50mv margin, so LD voltage is 0.75v->0.8v,
ND voltage is 0.8v->0.85v.
3. Use TOFF_DEB to differentiate new trimmed pmic and old pmic
Signed-off-by: Peng Fan <[email protected]>
|
|
Simon Glass <[email protected]> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
|
|
Clear any USB-keyboard devices before running a unit test, to avoid
using a stale udevice pointer in stdio. Add a long comment to explain
this situation and why this solution seems best, at least for now.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a new category which covers the console, including the stdio
drivers.
Signed-off-by: Simon Glass <[email protected]>
|
|
The driver model deadline for USB was in 2019, so drop the old USB
keyboard code, to avoid needing to deal with the extra code path.
Drop the unnecessary #ifdef around USB_KBD_BOOT_REPORT_SIZE while we
are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
Jim Liu <[email protected]> says:
Modify npcm8xx new boot design.
Correct memory setting and set gpio default value.
|
|
Change env offset and boot address for new design.
Signed-off-by: Jim Liu <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20241024
UEFI:
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
|
|
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Adjust the UUID library code so that it can be compiled as part of a
host tool.
This removes the one redundant log_debug() call, as well as the
incorrectly defined LOG_CATEGORY.
In general this is a fairly trivial change, just adjusting includes and
disabling list_guid.
This will be used by a new genguid tool to generate v5 GUIDs that match
those generated by U-Boot at runtime.
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add support for generating version 5 UUIDs, these are determistic and work
by hashing a "namespace" UUID together with some unique data. One intended
usecase is to allow for dynamically generate payload UUIDs for UEFI
capsule updates, so that supported boards can have their own UUIDs
without needing to hardcode them.
In addition, move the common bit twiddling code from gen_ran_uuid into a
separate function and rewrite it not to use clrsetbits (which is not
available when building as part of host tools).
Tests for this are added in an upcoming patch.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This let's us forward declare efi_guid_t in the UUID code without
pulling in efi.h
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU
for the first stage bootloader execution, namely SPL.
This patch implements the preliminary base to successfully run SPL
on this RV32-based MCU to the console banner message.
Signed-off-by: Chia-Wei Wang <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Import header file of sophgo cv1800b clock controller from kernel
Signed-off-by: Kongyang Liu <[email protected]>
Link: https://lore.kernel.org/all/IA1PR20MB4953637E7A6C121D7A700F1CBB8BA@IA1PR20MB4953.namprd20.prod.outlook.com/
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Daniel Schultz <[email protected]> says:
This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot
sources:
- Load U-Boot with USB DFU
- Load a Linux and initramfs from OSPI/QSPI NOR flash
- Load a Linux and rootfs from Network
Moreover, it adds required changes to the environment to boot an A/B
system with RAUC and includes some minor fixes.
|
|
This boot logic allows to boot a Kernel image, Device-Tree blob
and a initramfs from an external OSPI/QSPI NOR flash.
Signed-off-by: Daniel Schultz <[email protected]>
|
