| Age | Commit message (Collapse) | Author |
|---|
|
Versal2 mini configuration is designed for running memory test.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]>
|
|
This enables boards to choose where to/from the environment
should be saved/loaded. They can then for example support using
the same device (dynamically) from which the bootloader was
launched to load and save env data and do not have to
define CONFIG_ENV_SPI_BUS statically.
In my use case, the environment needs to be on the same device I
booted from. It can be the QSPI or OSPI device.
I therefore would override spi_get_env_dev in the board code,
read the bootmode registers to determine where we booted from
and return the corresponding device index.
Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michal Simek <[email protected]> # Move spi_get_env_dev to sf.c
|
|
Add a new callback release_core to the cpu_ops, which is used to
release a CPU core to run baremetal or RTOS application on a SoC
with multiple CPU cores.
Signed-off-by: Hou Zhiqiang <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
The function returns the rate of the parent clock, the previous text
made no sense at all.
Fixes: 4aa78300a025 ("dm: clk: Define clk_get_parent_rate() for clk operations")
Signed-off-by: Alexander Dahl <[email protected]>
Reviewed-by: Sean Anderson <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-video
- improve video sync performance with background syncing (cyclic)
- fix dropping characters when pasting commands over the UART
- enable background syncing by default for boards using VIDEO
- make sandbox video more responsive
|
|
Rather than using a static variable, use the video device's private
data to remember when the last video sync was completed. This allows
each display to have its own sync and avoids using static data in SPL.
Signed-off-by: Simon Glass <[email protected]>
|
|
The cyclic subsystem is currently enabled either in all build phases
or none. For tools this should not be enabled, but since lib/shc256.c
and other files include watchdog.h in the host build, we must make
sure that it is not enabled there.
Add an SPL symbol so that there is more control of this.
Add an include into cyclic.h so that tools can include this file.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Devarsh Thakkar <[email protected]>
Reviewed-by: Stefan Roese <[email protected]>
|
|
The linux kernel has the list_count_nodes() API functions which is
used for counting nodes of a list. This has now been imported in
U-Boot as part of an earlier commit. Use this function and drop the
list_count_items().
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Add a function to count the nodes of a list.
Taken from linux 6.11-rc1 tag commit 8400291e289e.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
U-Boot claims to create SMBIOS 3.7 tables. The type 0 table has
a field Extended BIOS ROM Size since version 3.1.
BIOS ROM sizes of 16 MiB or above must be written to this field.
Add and fill the missing field.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Mikhail Kshevetskiy <[email protected]> says:
v2 changes:
* Drop sw_blink_state structure, move its necessary fields to
led_uc_plat structure.
* Add cyclic_info pointer to led_uc_plat structure. This
simplify code a lot.
* Remove cyclic function search logic. Not needed anymore.
* Fix blinking period. It was twice large.
* Other cleanups.
v3 changes:
* Adapt code to recent cyclic function changes
* Move software blinking functions to separate file
* Other small changes
v4 changes:
* Refactoring of led_set_period() function
v5 changes
* Fix compilation if CONFIG_LED_BLINK is not defined
v6 changes:
* Enable LEDST_BLINK state unconditionally.
* Function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* Software blinking requires about 100 bytes of data for a led. It's
not a good idea to allocate so much memory for each supported led.
Change the code to allocate blinking data only for required leds.
|
|
If hardware (or driver) doesn't support leds blinking, it's
now possible to use software implementation of blinking instead.
This relies on cyclic functions.
Signed-off-by: Michael Polyntsov <[email protected]>
Signed-off-by: Mikhail Kshevetskiy <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Changes:
* enable LEDST_BLINK state unconditionally
* function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* fix cmd/led.c to work properly when LEDST_BLINK present, but
CONFIG_LED_BLINK is disabled
Signed-off-by: Mikhail Kshevetskiy <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Drop all duplicate newlines from the include directory files.
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
IPQ4019 clock dt-bindings are available in Linux upstream, and we can just
use those instead of carrying a downstream file that matches the upstream one
anyway.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
|
|
Fix build errors, add some debug logging.
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
A lot of the features in here are only relevant when running
multi-threaded with interrupts. Drop everything except what we need to
run single-threaded with a single TCS (which is all the rpmh-rsc
framework in U-Boot supports).
Keep rpmh_write_async() for simplicity and make it wrap the regular
rpmh_write().
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Integrate cmd-db into the U-Boot driver model.
This is just a wrapper around an in-memory database, so we just need to
get the address and validate that cmd-db is there.
Since cmd_db_header will be stored in the .data section we can skip
bind if it's already set.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Due to our simpler rpmh-rsc driver and lack of debugfs, we don't need
quite a few cmd-db functions, just drop them.
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Import RPMh and cmd-db framework from Linux 6.10-rc6.
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Import this function from Linux as of 6.10-rc6
Reviewed-by: Tom Rini <[email protected]>
Acked-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
The conversion to DM_I2C is mandatory, rework to remove
use of legacy I2C API.
Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Aleksandar Gerasimovski <[email protected]>
Cc: Holger Brunck <[email protected]>
Cc: Tomas Alvarez Vanoli <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Heiko Schocher <[email protected]>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Acked-by: Robert Nelson <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.
Signed-off-by: Tom Rini <[email protected]>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Signed-off-by: Tom Rini <[email protected]>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Acked-by: Robert Nelson <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Rework to remove use of legacy I2C API.
Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21728
- Conversions to DM_I2C and DM_SERIAL.
- Support for I2C3 and PWM1 for the imx6q clock driver.
- Improvements for udoo-neo
- Describe the i.MX93 CPU clocks in the devicetree to fix CPU clock printing
- Fix for SPI and NANC clk-imx8mn clock driver
|
|
Rework to remove use of legacy I2C API. Also switch
to DM_SERIAL to avoid board removal warning.
Signed-off-by: Anatolij Gustschin <[email protected]>
Cc: Troy Kisky <[email protected]>
|
|
Daniel Schultz <[email protected]> says:
The overlays are specified in the bootenv.txt file that is loaded into
the environment. Then these overlays get loaded and applied via a script.
These scripts for loading and applying devicetree overlays are identical
for many phytec boards.
Create a common overlays.env that can be included.
Add support for devicetree overlays to phycore-imx8mp and include the
overlays.env for phycore-imx93.
Rename existing environment variables according to bootstd doc.
Move MMC boot logic into a common k3_mmc.env file and include the new
overlays.env file as well.
|
|
Include the overlays.env file and run the apply routine before
booting the Kernel.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
This environment include can be used to boot from a
MMC device for PHYTEC's K3-based SoMs.
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
Rename existing environment variables according to the bootstd doc.
Renamed variables are fdto_addr, bootenv_addr, fdt_addr.
Signed-off-by: Benjamin Hahn <[email protected]>
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
|
The env scripts for loading and applying overlays are identical for many
PHYTEC Boards. Create a common env that can be included.
The env variables bootenv_addr and fdto_addr are board specific and need
to be set in the board specific file. The env variable get_cmd also
needs to be set in board specific files and can be set to tftp or dhcp.
Signed-off-by: Benjamin Hahn <[email protected]>
Signed-off-by: Daniel Schultz <[email protected]>
Reviewed-by: Teresa Remmet <[email protected]>
Reviewed-by: Wadim Egorov <[email protected]>
|
