| Age | Commit message (Collapse) | Author |
|---|
|
These functions are useful for the EFI app. As a first step towards
making these available outside lib/efi_loader, create a separate header
file and include it where needed. Add proper comments to the functions,
since many are missing at present.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/26275
- Fix boot regression on imx8mn_bsh_smm_s2/s2pro.
- Fix reset on imx6ulz_smm_m2.
- Adjust DDR initialization on imx6ulz_smm_m2.
- Fix CAAM startup error.
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26259
- Initial SPL support for T-Head TH1520 SoC
- Improve usability of TH1520 with mainline SPL
- Support building RV32 & RV64 images
- riscv: Improve jh7110 support
|
|
Calibration values were calculated using the NXP tool
I.MX6ULL_DDR3_Script_Aid_V0.01.xlsx
Signed-off-by: Wolfgang Birkner <[email protected]>
Signed-off-by: Simon Holesch <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
|
|
The BROM of TH1520 always initializes UART0's parent clock and
configures the baudrate to 115200. Describe the clock frequency to make
UART function correctly in SPL without introducing CCF.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Move unnecessary clock frequency assignment out of device-tree and into the
board config header so that the ns16550 serial driver can successfully init
during SPL after failing to resolve the parent clock from upstream dts. The
serial driver will then resolve clock frequency from device-tree node parent
clock at init during Main app as it is expected by upstream.
Signed-off-by: E Shattow <[email protected]>
Reviewed-by: Leo Yu-Chi Liang <[email protected]>
|
|
Similar to ARM and X86, introduce a new image type which allows u-boot
to distinguish between images built for 32-bit vs 64-bit Risc-V CPUs.
Signed-off-by: Mayuresh Chitale <[email protected]>
Reviewed-by: Maxim Moskalets <[email protected]>
|
|
Functions called from EFI applications should not do console output.
Refactor the wget code to implement this requirement. The wget_http_info
struct is used to hold the boolean that signifies whether the output is
allowed or not.
Signed-off-by: Jerome Forissier <[email protected]>
Reported-by: Heinrich Schuchardt <[email protected]>
|
|
We don't want ANSI escape-sequences written in tests since it is a pain
to check the output with ut_assert_nextline() et al.
Provide a way to tests to request that these characters not be sent.
Add a proper function comment while we are here, to encourage others.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Now that all of the cases of code that relied on <command.h> to provide
<env.h> (or one of the headers that it includes, and so forth) have been
fixed, we can drop the include from here.
Signed-off-by: Tom Rini <[email protected]>
|
|
This file only needs the definition of 'struct rtc_time' and that is
found in <rtc_def.h>. Use that instead of pulling in rtc.h to pull in
rtc_def.h as rtc.h includes many other include files.
Signed-off-by: Tom Rini <[email protected]>
|
|
Signed-off-by: Jonathan Currier <[email protected]>
|
|
|
|
https://source.denx.de/u-boot/custodians/u-boot-rockchip
CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/26117
- New Board support: rk3566 LCKFB TaishanPi, rk3588 Xunlong Orange Pi 5
Max;
- Add rk3288 rmii support;
- pinctrl driver fix;
- binman description update;
|
|
Switch boards that use CFG_PRAM to TEGRA_PRAM.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Wrap CFG_PRAM with Kconfig option.
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
MAX8907 PMIC has embedded poweroff function used by some device to initiane
device power off. Implement it as optional sysreset driver guarded by
kconfig option and system-power-controller device tree property.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
Added a new regulator driver for the MAXIM MAX8907 PMIC, providing
essential regulator functionalities and incorporated the necessary binding
framework within the core PMIC driver.
Tested-by: Ion Agorria <[email protected]>
Signed-off-by: Svyatoslav Ryhel <[email protected]>
|
|
This series from Daniel Schultz <[email protected]> cleans up the
environment further on the phytec am62ax platforms.
Link: https://lore.kernel.org/r/[email protected]
|
|
'net_fetch_cmd' is not defined by the K3 board files. They
use the more common 'get_cmd' from NXP products.
Signed-off-by: Daniel Schultz <[email protected]>
|
|
Extensions are now handled by the board-code. Remove this non-existing
function to proper boot from network.
Signed-off-by: Daniel Schultz <[email protected]>
|
|
Loading a FIT image for kernel, initrd and rootfs on px30 can result in an
memory overlap, resulting in the not 100% helpful message of
"This will not be a case any time" from lmb_fix_over_lap_regions().
Adding a bit of debug info to lmb_fix_over_lap_regions() brings:
lmb_fix_over_lap_regions: base1 0x280000-0x6005ac > base2 0x600000-0x6000d1
So this is because the FIT image gets loaded to the kernel_addr_r at
0x280000 while the pxe-file is already living at 0x600000, only 3.5MB
behind.
In commit 4acc8bb044a4 ("configs: rockchip: sync ENV_MEM_LAYOUT_SETTINGS
for rk3308, rk3328, and rk3399") FUKAUMI Naoki already brought the memory
layouts for the mentioned socs in sync.
Adjusting the env-layout on px30 to this scheme, magically solves the
overlap issue and also brings px30 more in line with the other mentioned
SoCs.
Signed-off-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang <[email protected]>
|
|
Introduce support for env in generic MTD. Currently we only support SPI
flash based on the lagacy sf cmd that assume SPI flash are always NOR.
This is not the case as to SPI controller also NAND can be attached.
To support also these flash scenario, add support for storing and
reading ENV from generic MTD device by adding an env driver that
base entirely on the MTD api.
Introduce a new kconfig CONFIG_ENV_IS_IN_MTD and
CONFIG_ENV_MTD_DEV to define the name of the MTD device as exposed
by mtd list.
Signed-off-by: Christian Marangi <[email protected]>
|
|
1. Add pcie device id 0x15f3
2. Add IIC phy id 0x67C9DC00
Signed-off-by: ZhiJie.Zhang <[email protected]>
|
|
For the STM32MP15 DHSOM, change the default environment so an AB schema
on a device can be detected.
For this the define "SCAN_DEV_FOR_BOOT_PARTS" is overwritten and
appended.
The detection works by looking for the partitions with specific lables.
The name of those partitions are in the variables and its defaults:
* dh_ab_partname_primary=rootfs-a
* dh_ab_partname_secondary=rootfs-b
To prevent being hanging at bootcmd, enable "CONFIG_BOOT_RETRY" and
"CONFIG_RESET_TO_RETRY", but the timer will only be activated, if the AB
partitions are detected.
Signed-off-by: Pascal Zimmermann <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
Make it possible to substitute the 'part list' command inside
'scan_dev_for_boot_part' with a custom board specific implementation.
For this the new define 'SCAN_DEV_FOR_BOOT_PARTS' is introduced.
Signed-off-by: Pascal Zimmermann <[email protected]>
Reviewed-by: Patrice Chotard <[email protected]>
|
|
This patch adds i.MX95 19x19 EVK board basic support.
Messaging unit for EdgeLock Secure Enclave, messaging unit for System
Manager, uSDHC for SD Card, gpio, lpuart are supported now.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
i.MX95 uses binman to invoke mkimage to create image container. 2 image
containers are needed currently. The first one is composed of
ahab-container.img, LPDDR firmware images, OEI images, System Manager
image and u-boot-spl.bin. The second one is consisted of ARM Trusted
firmware and u-boot.bin.
Because DDR OEI image and LPDDR firmware images have to be packaged
together and named as m33-oei-ddrfw.bin by binman, so imx9_image.sh does
not check if m33-oei-ddrfw.bin exists.
When using "make imx95_19x19_evk_defconfig; make", imx9_image.sh will
delete the line for u-boot.bin in container.cfg. In fact, binman is
always called after the u-boot.bin is built, so imx9_image.sh does not
check if u-boot.bin exists.
Signed-off-by: Alice Guo <[email protected]>
|
|
@protocols is an array of protocol identifiers that are implemented,
excluding the Base protocol. Four protocol identifiers are packed into
each array element. The number of elements of @protocols is specified by
callee-side.
Signed-off-by: Ye Li <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
|
|
Clock driver based on SCMI clock management protocol in Linux checks
clock state, parent and rate control permissions. To be consistent with
the kernel driver, add this check here. CLOCK_GET_PERMISSIONS is from
ARM System Control and Management Interface Platform Design Document 3.2.
When using common clock framework (CCF), use the clock signal ID to get
the clock registered by clk_register() in scmi_clk_probe(), and then
obatin the struct clk_scmi variable with container_of().
Signed-off-by: Alice Guo <[email protected]>
Signed-off-by: Ye Li <[email protected]>
Reviewed-by: Peng Fan <[email protected]>
|
|
This patch adds the command CLOCK_PARENT_SET that can be used to set the
parent of a clock. ARM SCMI Version 3.2 supports to change the parent of
a clock device.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Ye Li <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
SCMI Performance domain management protocol is intended for performance
management of groups of devices or APs that run in the same performance
domain. The functionality provided by the callee-side can be used by
passing the corresponding message_id.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Ye Li <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
getting the ROM passover data
SCMI misc protocol is intended for miscellaneous functions which are
device specific and are usually defined to access bit fields. It is i.MX
specific. This patch adds SCMI misc protocol protocol_id and message_id
for getting the ROM passover data.
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Ye Li <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
|
|
This patch adds SCMI pin control protocol support to make the pin
controller driver based on SCMI, such as
drivers/pinctrl/nxp/pinctrl-imx-scmi.c, can be bound to the SCMI agent
device whose protocol id is 0x19.
Signed-off-by: Alice Guo <[email protected]>
|
|
This patch provides a pinctrl driver based on SCMI pin control protocol.
Currently, only the PINCTRL_CONFIG_SET command is implemented.
Signed-off-by: Ranjani Vaidyanathan <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Signed-off-by: Alice Guo <[email protected]>
Reviewed-by: Ye Li <[email protected]>
|
|
linker-genetated array
U_BOOT_SCMI_PROTO_DRIVER macro is used to add a SCMI protocol driver to
scmi_proto_driver list. scmi_proto_driver_get() function can be used to
match a SCMI protocol id and its driver.
Signed-off-by: Alice Guo <[email protected]>
|
|
SeeedStudio BeagleBone Green Eco (BBGE) is a clone of the BeagleBone Green
(BBG). It has minor differences from the BBG, such as a different PMIC,
a different Ethernet PHY, and a larger eMMC.
The PMIC is not yet supported in mainline, but the work is ongoing.
Signed-off-by: Kory Maincent <[email protected]>
|
|
Provide a way to draw an unfilled box of a certain width. This is useful
for grouping menu items together.
Add a comment showing how to see the copy-framebuffer, for testing.
Signed-off-by: Simon Glass <[email protected]>
|
|
When using expo we want to be able to control the information on the
display and avoid other messages (such as USB scanning) appearing.
Add a 'quiet' flag for the console, to help with this.
The test is a little messy since stdio is still using the original
vidconsole create on start-up. So take care to use the same.
Signed-off-by: Simon Glass <[email protected]>
|
|
We want to check the display contents in expo tests, so move the two
needed functions to a new header file.
Rename them to have a video_ prefix.
Signed-off-by: Simon Glass <[email protected]>
|
|
When writing multiple lines of text we need to be able to control which
text goes on each line. Add a new vidconsole_put_stringn() function to
help with this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Expo needs to be able to word-wrap lines so that they are displayed as
the user expects. Add a limit on the width of each line and support this
in the measurement algorithm.
Add a log category to truetype while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
It is useful to be able to embed newline characters in the string and
have the text measured into multiple lines. Add support for this.
Signed-off-by: Simon Glass <[email protected]>
|
|
Update the vidconsole API so that measure() can measure multiple lines
of text. This will make it easier to implement multi-line fields in
expo.
Tidy up the function comments while we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The CONFIG_WHITE_ON_BLACK setting is hard-coded at build-time. It is
useful to be able to control this when showing menus.
Create a property to hold this information, using the CONFIG as the
initial value.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add a console_printf_select_stderr() function so that it is not
necessary for the caller to process the format string.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Alexander Sverdlin <[email protected]>
|
|
Caleb Connolly <[email protected]> says:
Introduce a new event to signal that the live tree has been built,
allowing boards to perform fixups on the tree before devices are bound.
Crucially this allows for devices to be enabled or disabled, but also
allows for properties that are parsed during the bind stage to be
modified (such as dr_mode for dwc3).
With this in place, mach-snapdragon is switched over to use the event
and some hacky U-Boot specific DT overrides (which had to be undone
prior to booting an image) are removed in favour of fixing up the
livetree (which is not passed on to further boot stages).
Finally, some minor fixes are made for the QCM2290 RB1 board, the sdcard
is enabled and it now uses USB host mode in U-Boot like it's bigger
sibling the RB2.
Link: https://lore.kernel.org/r/[email protected]
|
|
OF_LIVE offers a variety of benefits, one of them being that the live
tree can be modified without caring about the underlying FDT. This is
particularly valuable for working around U-Boot limitations like lacking
USB superspeed support on Qualcomm platforms, no runtime OTG, or
peripherals like the sdcard being broken (and displaying potentially
worrying error messages).
Add an event to signal when the live tree has been built so that we can
apply fixups to it directly before devices are bound.
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Support for calculating video damage
|
|
CONFIG_VIDEO_COPY implemented a range-based copying mechanism: If we
print a single character, it will always copy the full range of bytes
from the top left corner of the character to the lower right onto the
uncached frame buffer. This includes pretty much the full line contents
of the printed character.
Since we now have proper damage tracking, let's make use of that to reduce
the amount of data we need to copy. With this patch applied, we will only
copy the tiny rectangle surrounding characters when we print them,
speeding up the video console.
After this, changes to the main frame buffer are not immediately copied
to the copy frame buffer, but postponed until the next video device
sync. So issue an explicit sync before inspecting the copy frame buffer
contents for the video tests.
Signed-off-by: Alexander Graf <[email protected]>
[Alper: Rebase for fontdata->height/w, fill_part(), fix memmove(dev),
drop from defconfig, use damage.xstart/yend, use IS_ENABLED(),
call video_sync() before copy_fb check, update video_copy test]
Co-developed-by: Alper Nebi Yasak <[email protected]>
Signed-off-by: Alper Nebi Yasak <[email protected]>
Link: https://lore.kernel.org/u-boot/[email protected]/
|
