| Age | Commit message (Collapse) | Author |
|---|
|
The EFI HTTP boot puts the ISO installer image at some location in
memory. Information about this image has to be passed on to the OS
kernel, which is done by adding a persistent memory(pmem) node to the
devicetree(DT) that is passed to the OS. The OS kernel then gets
information about the presence of this ISO image and proceeds with the
installation.
In U-Boot, this ISO image gets mounted as a memory mapped blkmap
device slice, with the 'preserve' attribute. Add a helper function
which iterates through all such slices, and invokes a callback. The
callback adds the pmem node to the DT and removes the corresponding
memory region from the EFI memory map. Invoke this helper function as
part of the DT fixup which happens before booting the OS.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Tobias Waldekranz <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
ACPI has NFIT and NVDIMM support to provide ramdisks to the OS. Linux
and device trees have support for persistent memory(pmem) devices. The
firmware can then add a pmem node for the region of memory occupied by
the ramdisk when passing the device-tree to the OS.
It's worth noting that for linux to instantiate the /dev/pmemX device,
the memory described in the pmem node has to be omitted from the EFI
memory map we hand over to the OS if ZONE_DEVICES and SPARSEMEM is
enabled. With those enabled the pmem driver ends up calling
devm_memremap_pages() instead of devm_memremap(). The latter works
whether the memory is omitted or marked as reserved, but mapping pages
only works if the memory is omitted.
On top of that, depending on how the kernel is configured, that memory
area must be page aligned or 2MiB aligned. PowerPC is an exception here
and requires 16MiB alignment, but since we don't have EFI support for
it, limit the alignment to 2MiB.
Ensure that the ISO image is 2MiB aligned and remove the region
occupied by the image from the EFI memory map.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
With upcoming changes supporting pmem nodes, we need to remove the
pmem area from the EFI memory map. Rename efi_add_memory_map_pg() to
efi_update_memory_map(), and allow removing memory from the EFI memory
map.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
The efi_install_fdt() function is called before booting an EFI binary,
either directly, or through a bootmanager. This function installs a
copy of the device-tree(DT) on the EFI configuration table, which is
passed on to the OS.
The current logic in this function does not install a DT if a
device-tree is already installed as an EFI configuration
table. However, this existing copy of the DT might not be up-to-date,
or it could be a wrong DT for the image that is being booted. Always
install a DT afresh to the configuration table before booting the EFI
binary.
Installing a new DT also involves some additional checks that are
needed to clean up memory associated with the existing DT copy. Check
for an existing copy, and free up that memory.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
There is logic in the copy_fdt() function which is iterating over the
platform's DRAM banks and setting the fdt_ram_start variable. However,
this variable is not used subsequently in the function. Remove this
superfluous code.
Signed-off-by: Sughosh Ganu <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Prepare v2025.04-rc5
|
|
Ben reports a failure to boot the kernel on hardware that starts its
physical memory from 0x0.
The reason is that lmb_alloc_addr(), which is supposed to reserve a
specific address, takes the address as the first argument, but then also
returns the address for success or failure and treats 0 as a failure.
Since we already know the address change the prototype to return an int.
Reported-by: Ben Schneider <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Tested-by: Ben Schneider <[email protected]>
Reviewed-by: Sughosh Ganu <[email protected]>
|
|
EFI applications need to be relocatable. Ordinarily, this is achieved
through a PE-format .reloc section, but since that requires toolchain
tricks to achieve, U-Boot's EFI applications instead embed ELF-flavored
relocation information and use it for self-relocation; thus, the
.dynamic section needs to be preserved.
Before this patch, it was tacked on to the end of .text, but this was
not proper: A .text section is SHT_PROGBITS, while the .dynamic section
is SHT_DYNAMIC. Attempting to combine them like this creates a section
type mismatch. While GNU ld doesn't seem to complain, LLVM's lld
considers this a fatal linking error.
This patch moves .dynamic out to its own section, so that the output ELF
has the correct types. (They're all mashed together when converting to
binary anyway, so this patch causes no change in the final .efi output.)
Signed-off-by: Sam Edwards <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20250310
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/25060
Usb gadget:
- Remove legacy CONFIG_USB_DEVICE
- Remove legacy usbtty driver
|
|
The lone user of the legacy USB device framework have been removed for
some time. Remove the final parts of the code that were missed.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mattijs Korpershoek <[email protected]>
|
|
Structure jmp_buf_data provides the underlying format of jmp_buf, which
we actually don't care about. Clean up existing code to use the standard
jmp_buf type. This introduces no functional change.
Signed-off-by: Yao Zi <[email protected]>
Reviewed-by: Jerome Forissier <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Separate setjmp.h into an architecture independent part and an architecture
specific part. This simplifies moving from using struct jmp_buf_data
directly to using type jmp_buf in our code which is the C compliant way.
Reviewed-by: Jerome Forissier <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Add support for multiple efi_net_obj structs in efi_net.c. This comes
in preparation for an EFI network driver supporting multiple network
interfaces. For now the EFI network stack still registers a single ethernet
udevice as an EFI network device even if multiple are present, namely
the one that was the current device at the moment of EFI initialization.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
Add a dhcp cache to store the DHCP ACKs received by the U-Boot network
stack.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
In preparation to support mutiple efi net udevices. Add a device path
cache to support device paths from multiple ethernet udevices.
The device paths can be added to the cache before EFI gets initialized and
the protocols get installed.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
In preparation to support multiple EFI net objects, support
constructing device paths using an ethernet device different
than the default. Add a udevice argument to the device path
generation, and keep the callsites with eth_get_dev() to
preserve existing functionality.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
This gets called each time a payload is to get executed by bootefi.
For now this only updates the PXE IP address.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
The coomand bootefi calls efi_init_obj_list to do the efi set up
before launching an .efi payload, but efi_init_obj_list is called
only once. There are some initializations which depend on the
environment and should be done each time a payload gets launched and
not only once. A motivation for this changes is the following order
of events:
1. Launch an EFI application (e.g. bootefi hello)
2. Change the ip address
3. Launch another application which uses the pxe protocol
As the EFI pxe protocol was initialized when the handles
for efi net were created in 1., the ip was hardcoded there.
In this example, another possibility would be to make a callback for ip
address changes to go all the way up to efi_net.
Signed-off-by: Adriano Cordova <[email protected]>
|
|
The following symbols are exposed:
- efi_reinstall_protocol_interface
This is done so that the device path protocol interface
of the network device can be changed internally by u-boot
when a new bootfile gets downloaded.
- eth_set_dev
To support multiple network udevices
- efi_close_event
This comes in preparation to support unregistering
an EFI network device from the EFI network stack when
the underlying U-boot device gets removed
- efi_[dis]connect_controller
The EFI network driver uses ConnectController to add a
NIC to the EFI network stack.
- efi_uninstall_protocol_interface
connect_controler for the efi network driver can install
protocols, which need to be uninstalled in disconnect_controller
- EFI_SIMPLE_NETWORK_PROTOCOL_GUID
Signed-off-by: Adriano Cordova <[email protected]>
|
|
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54e8 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <[email protected]>
|
|
EFI_FILE_PROTOCOL.SetInfo()."
Gabriel Dalimonte <[email protected]> says:
This series adds support for file renaming to EFI_FILE_PROTOCOL.SetInfo().
One of the use cases for renaming in EFI is to facilitate boot loader
boot counting.
No existing filesystems in U-Boot currently include file renaming,
resulting in support for renaming at the filesystem level and a
concrete implementation for the FAT filesystem.
Link: https://lore.kernel.org/r/[email protected]
|
|
Following the UEFI specification. The specification did not seem to
delineate if file_name was explicitly a file name only, or could
include paths to move the file to a different directory. The more
generous interpretation of supporting paths was selected.
Signed-off-by: Gabriel Dalimonte <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
In order to support renaming via SetInfo(), path must allow for longer
values than what was originally present when file_handle was allocated.
Signed-off-by: Gabriel Dalimonte <[email protected]>
|
|
The implementation roughly follows the POSIX specification for
rename() [1]. The ordering of operations attempting to minimize the chance
for data loss in unexpected circumstances.
The 'mv' command was implemented as a front end for the rename operation
as that is what most users are likely familiar with in terms of behavior.
The 'FAT_RENAME' Kconfig option was added to prevent code size increase on
size-oriented builds like SPL.
[1] https://pubs.opengroup.org/onlinepubs/9799919799/functions/rename.html
Signed-off-by: Gabriel Dalimonte <[email protected]>
|
|
This commit fixes an use after free introduced in Commit e55a4acb54
(" efi_loader: net: set EFI bootdevice device path to HTTP when loaded
from wget"). The logic in efi_net_set_dp is reworked so that when the
function is invoked it not only changes the value of the static variable
net_dp (this is how the function was implemented in e55a4acb54) but also
updates the protocol interface of the device path protocol in case efi
has started.
Fixes: e55a4acb54e8 ("efi_loader: net: set EFI bootdevice device path to HTTP when loaded from wget")
Signed-off-by: Adriano Cordova <[email protected]>
|
|
The function is only used in the efi_memory.c module.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
When building with qemu_arm64_defconfig with CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
and CONFIG_EFI_LOADER=n an error undefined reference to efi_add_memory_map_pg
occurs.
Move the EFI dependent part of lmb_map_update_notify() to the EFI
sub-system.
Reported-by: Liya Huang <[email protected]>
Acked-by: Liya Huang <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
For EFI runtime services, we manage to preserve string literals
by placing the .efi_runtime section just before .data and preserving
it when marking the runtime memory by marking surrounding boottime
code as runtime. This is ok for now but will break if we update any
linker scripts and decouple .text and .runtime sections.
So let's define the strings we used to compare in the appropriate
section for runtime services
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Mark Kettenis <[email protected]>
|
|
After having been compared to a NULL value at efi_disk.c:426,
pointer 'part_info' is dereferenced at efi_disk.c:534.
Signed-off-by: Maks Mishin <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Move default eventlog size from efi to tpm for using in both
efi and measured boot.
Signed-off-by: Raymond Mao <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Finish off the implementation so it is possible to boot an EFI app over
a network.
Signed-off-by: Simon Glass <[email protected]>
|
|
Rather than setting up the global variables and then making the call,
pass them into function directly. This cleans up the code and makes it
all a bit easier to understand.
Signed-off-by: Simon Glass <[email protected]>
|
|
This code is only needed if an invalid image/device path is passed in.
Move the code out to a caller where this can be dealt with. The normal
flow will provide these parameters.
Signed-off-by: Simon Glass <[email protected]>
|
|
This uses a few global variables at present. With the bootflow we have
the required parameters, so add a function which accepts these. Update
the existing function to call the new one with the globals.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Provide these globals as parameters to this function, on the way to
making it possible to start an image without relying on the globals.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
If a board has a strict size limit, disable
* Unicode capitalization and
* HII protocols
by default to reduce the image size.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
The log category should be LOGC_EFI all over the EFI sub-system.
Signed-off-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
When logging running an image, e.g. `bootefi hello` the indent is not
correctly reset.
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Simon Glass <[email protected]> says:
The current UPL spec[1] has been tidied up and improved over the last
year, since U-Boot's original UPL support was written.
This series includes some prerequisite patches needed for the real UPL
patches. It is split from [2]
[1] https://github.com/UniversalPayload/spec/tree/3f1450d
[2] https://patchwork.ozlabs.org/project/uboot/list/?series=438574&state=*
Link: https://lore.kernel.org/r/[email protected]
|
|
The add_u_boot_and_runtime() function paints with a broad brush,
considering all of the memory from the top of U-Boot stack to
gd->ram_top as EFI_RUNTIME_SERVICES_CODE
This is fine, but we need to make sure we don't add a separate entry for
any ACPI tables in this region (which happens when bloblist is used for
tables). Otherwise the memory map looks strange and we get a test
failure on qemu-x86 (only) for the 'virtual address map' test.
Good map:
Type Start End Attributes
================ ================ ================ ==========
CONVENTIONAL 0000000000000000-00000000000a0000 WB
RESERVED 00000000000a0000-00000000000f0000 WB
RUNTIME DATA 00000000000f0000-00000000000f2000 WB|RT
RESERVED 00000000000f2000-0000000000100000 WB
CONVENTIONAL 0000000000100000-0000000005cc7000 WB
BOOT DATA 0000000005cc7000-0000000005ccc000 WB
RUNTIME DATA 0000000005ccc000-0000000005ccd000 WB|RT
BOOT DATA 0000000005ccd000-0000000005cce000 WB
RUNTIME DATA 0000000005cce000-0000000005cf0000 WB|RT
BOOT DATA 0000000005cf0000-0000000006cf5000 WB
RESERVED 0000000006cf5000-0000000006cfa000 WB
ACPI RECLAIM MEM 0000000006cfa000-0000000006d1c000 WB
RESERVED 0000000006d1c000-0000000006f35000 WB
RUNTIME CODE 0000000006f35000-0000000006f37000 WB|RT
RESERVED 0000000006f37000-0000000008000000 WB
RESERVED 00000000e0000000-00000000f0000000 WB
Bad map: (with BLOBLIST_TABLES but without this patch):
Type Start End Attributes
================ ================ ================ ==========
CONVENTIONAL 0000000000000000-00000000000a0000 WB
RESERVED 00000000000a0000-00000000000f0000 WB
ACPI RECLAIM MEM 00000000000f0000-00000000000f1000 WB
RESERVED 00000000000f1000-0000000000100000 WB
CONVENTIONAL 0000000000100000-0000000005ca5000 WB
BOOT DATA 0000000005ca5000-0000000005caa000 WB
RUNTIME DATA 0000000005caa000-0000000005cab000 WB|RT
BOOT DATA 0000000005cab000-0000000005cac000 WB
RUNTIME DATA 0000000005cac000-0000000005cce000 WB|RT
BOOT DATA 0000000005cce000-0000000006cd3000 WB
RUNTIME DATA 0000000006cd3000-0000000006cd5000 WB|RT
BOOT DATA 0000000006cd5000-0000000006cf4000 WB
RESERVED 0000000006cf4000-0000000006cf9000 WB
ACPI RECLAIM MEM 0000000006cf9000-0000000006ce6000 WB
Signed-off-by: Simon Glass <[email protected]>
|
|
In reworking the BLK usage in Kconfig, I found there's a few issues with
EFI_LOADER=y and BLK=n. In general, we can easily say that
lib/efi_loader/efi_file.c also should only be built with CONFIG_BLK.
That however leaves the bootmgr code, eficonfig code and then parts of
efi_device_path.c, efi_boottime.c and efi_setup.c which functionally
depend on BLK. While these calls can be if'd out, I'm unsure if the
result is usable. So rather than leave that buildable and imply that it
is, I'm leaving that combination non-buildable and commenting that
EFI_LOADER depends on BLK in the Kconfig currently.
Reviewed-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
This function is not called from outside this file and has no entry in
the header file, so mark it static.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Move this code into a function so it can be called from elsewhere.
Note that the recently added network code uses the same
'global variable' approach. It could use a separate clean-up.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
Except for the architecture specific lines ARM and RISC-V can use the same
linker script. Move the common lines to an include.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
This is done so that the device path protocol interface of the network
device can be changed internally by u-boot when a new bootfile gets
downloaded.
Signed-off-by: Adriano Cordova <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The fix provided by 997fc12ec91 is actually introducing
a buffer overrun, and the overrun is effective if the
memory after the reloc section is not zeroed.
Probably that's why this bug is not always noticeable.
The problem is that 8-bytes 'rel' pointer can be 4-bytes aligned
according to the PE Format, so the actual relocate function can
take values after the reloc section.
One example is the following dump from the reloc section:
bce26000: 3000 0000 000c 0000 0000 0000 0000 0000
bce26010: 7c00 9340 67e0 f900 1c00 0ea1 a400 0f20
This section has two relocations at offset bce26008 and bce2600a,
however the given size (rel_size) for this relocation is 16-bytes
and this is coming form the efi image Misc.VirtualSize, so in this
case the 'reloc' pointer ends at affset bce2600c and is taken as
valid and this is where the overflow is.
In our system we see this problem when we are starting the
Boot Guard efi image.
This patch is fixing the overrun while preserving the fix done
by 997fc12ec91.
Signed-off-by: Aleksandar Gerasimovski <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
When the TCG2 protocol installation fails, we are trying to remove
all the objects we created in tcg2_uninit().
However, there are cases when this function runs before the config
table was installed. So instead of printing an error unconditionally
check against EFI_NOT_FOUND and don't print anything if the table wasn't
installed to begin with.
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
We should not write messages in UEFI API functions. This may lead to
incorrect screen layout in UEFI application.
For single statements after if clause we don't need braces.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <[email protected]>
Tested-by: Sam Protsenko <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
lmb_alloc_addr() is just calling lmb_alloc_addr_flags() with LMB_NONE
There's not much we gain from this abstraction, so let's remove the
latter, add a flags argument to lmb_alloc_addr() and make the code a
bit easier to follow.
Reviewed-by: Sam Protsenko <[email protected]>
Tested-by: Sam Protsenko <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
