| Age | Commit message (Collapse) | Author |
|---|
|
Currently U-Boot uses ESP as storage for EFI variables.
Devices with SPI Flash are used for storing environment with this
commit we allow EFI variables to be stored on SPI Flash.
Signed-off-by: Shantur Rathore <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on AML-S905D3-CC
Acked-by: Ilias Apalodimas <[email protected]>
|
|
Every SetVariable() call triggers efi_var_mem_ins() followed by
efi_var_to_storage(), even when the variable value is not actually
changing. This is unfriendly to flash-backed stores that suffer
wear from unnecessary erase/write cycles.
Add a change-detection path to efi_var_mem_ins(): when size2 == 0
(i.e. not an append) and the caller passes a non-NULL changep flag,
look up the existing variable and compare attributes, length, time
and data byte-by-byte. If everything matches, set *changep = false
and return EFI_SUCCESS without touching the variable buffer.
Both efi_set_variable_int() and efi_set_variable_runtime() now
check the flag and skip efi_var_mem_del() / efi_var_to_storage()
when nothing changed.
Introduce efi_memcmp_runtime() - a runtime-safe byte-by-byte memory
comparison helper, following the same pattern as the existing
efi_memcpy_runtime(). The standard memcmp() is not available after
ExitBootServices() and calling it from Linux will crash.
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The value of buf->length comes from outside U-Boot and may be incorrect.
We must avoid to overrun our internal buffer for excessive values.
If buf->length is shorter than the variable file header, the variable
file is invalid.
Reviewed-by: Ilias Apalodimas <[email protected]>
Tested-by: Michal Simek <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Export the ECPT GUID, to prepare accessing it from more than one location.
The C file containing the GUID is compiled only when CONFIG_EFI_ECPT is
set; gate the export accordingly.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The UEFI specification requires at least 128 KiB stack space. Consider this
value as a prerequisite for CONFIG_EFI_LOADER.
Mention the requirement in the CONFIG_STACK_SPACE description and decribe
that the UEFI sub-system uses CONFIG_STACK_SPACE when defining the memory
map.
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Prepare v2026.04-rc4
|
|
When the LoadImage() UEFI function is called with both its SourceBuffer and
DevicePath input arguments equal to NULL, it must return EFI_NOT_FOUND [1].
However, it does return EFI_INVALID_PARAMETER instead; fix it.
Link: https://uefi.org/specs/UEFI/2.11/07_Services_Boot_Services.html#efi-boot-services-loadimage [1]
Reported-by: Sathisha Shivaramappa <[email protected]>
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Prepare v2026.04-rc3
|
|
Peng Fan (OSS) <[email protected]> says:
This patch set primarily removes unused DECLARE_GLOBAL_DATA_PTR
instances.
Many files declare DECLARE_GLOBAL_DATA_PTR and include
asm/global_data.h even though gd is never used. In these cases,
asm/global_data.h is effectively treated as a proxy header, which is
not a good practice.
Following the Include What You Use principle, files should include
only the headers they actually depend on, rather than relying on
global_data.h indirectly. This approach is also adopted in Linux kernel
[1].
The first few patches are prepartion to avoid building break after
remove the including of global_data.h.
A script is for filtering the files:
list=`find . -name "*.[ch]"`
for source in ${list}
do
result=`sed -n '/DECLARE_GLOBAL_DATA_PTR/p' ${source}`
if [ "${result}" == "DECLARE_GLOBAL_DATA_PTR;" ]; then
echo "Found in ${source}"
result=`sed -n '/\<gd\>/p' ${source}`
result2=`sed -n '/\<gd_/p' ${source}`
result3=`sed -n '/\<gd->/p' ${source}`
if [ "${result}" == "" ] && [ "${result2}" == "" ] && [ "${result3}" == "" ];then
echo "Cleanup ${source}"
sed -i '/DECLARE_GLOBAL_DATA_PTR/{N;/\n[[:space:]]*$/d;s/.*\n//;}' ${source}
sed -i '/DECLARE_GLOBAL_DATA_PTR/d' ${source}
sed -i '/global_data.h/d' ${source}
git add ${source}
fi
fi
done
[1] https://lpc.events/event/17/contributions/1620/attachments/1228/2520/Linux%20Kernel%20Header%20Optimization.pdf
CI: https://github.com/u-boot/u-boot/pull/865
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove DECLARE_GLOBAL_DATA_PTR from files where gd is not used, and
drop the unnecessary inclusion of asm/global_data.h.
Headers should be included directly by the files that need them,
rather than indirectly via global_data.h.
Reviewed-by: Patrice Chotard <[email protected]> #STMicroelectronics boards and STM32MP1 ram test driver
Tested-by: Anshul Dalal <[email protected]> #TI boards
Acked-by: Yao Zi <[email protected]> #TH1520
Signed-off-by: Peng Fan <[email protected]>
|
|
EFI_VARIABLE_FILE_STORE is only available when FAT_WRITE is enabled but
that's not valid for all platforms and dependency should be covered.
Also Kconfig behavior is that if default option is not valid then Kconfig
selects the first presented valid option instead hence it is better to
record EFI_VARIABLE_NO_STORE as safe default option.
Suggested-by: Tom Rini <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
efi_var_to/from_file() suggest method where variables are placed. But there
is no reason for it and generic name can be used to wire also different
locations for variables.
Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on AML-S905D3-CC
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Currently efi_var_file.c has functions to store/read
EFI variables to/from memory buffer. These functions
can be used with other EFI variable stores so move
them out to efi_var_common.c
Signed-off-by: Shantur Rathore <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Tested-by: Neil Armstrong <[email protected]> # on AML-S905D3-CC
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The EFI_PARTITION_INFO_PROTOCOL provides detailed information about
partitions. The UEFI specification mentions that both GPT and MBR
partition schemes are supported, but the U-Boot implementation only
supports the former.
This can cause compatibility issues for platforms whose boot ROM only
supports MBR. This change adds support for MBR partition tables to
the protocol, making U-Boot compatible with systems that require a
legacy MBR table.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
|
|
The size of the memory allocated for the EFI Conformance Profiles Table is
computed with `num_entries' always equal to zero, which is incorrect when
CONFIG_EFI_EBBR_2_1_CONFORMANCE is enabled.
This can be verified by allocating the ECPT memory with malloc() instead of
efi_allocate_pool(), building u-boot with sandbox_defconfig and
CONFIG_VALGRIND=y, and by finally running the following command:
valgrind --suppressions=scripts/u-boot.supp \
./u-boot -T -c 'efidebug tables'
Fix this by using an array of the supported profiles GUIDs instead, which
should also be easier to extend in the future as U-Boot should publish the
GUIDs for all supported EBBR revisions.
Fixes: 6b92c1735205 ("efi: Create ECPT table")
Suggested-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Jose Marinho <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The read_blocks() function from the Block IO protocol is a UEFI function;
make sure to call it from within U-Boot using the EFI_CALL() macro.
To demonstrate the issue on an AArch64 machine, define the DEBUG macro in
include/efi_loader.h and build u-boot with sandbox_defconfig, then download
and uncompress the ACS-DT image [1], and finally execute the following
command:
$ ./u-boot -T -c " \
host bind 0 systemready-dt_acs_live_image.wic; \
setenv loadaddr 0x10000; \
load host 0 \${loadaddr} EFI/BOOT/Shell.efi; \
bootefi \${loadaddr} \${fdtcontroladdr}"
The following assertion should fail:
lib/efi_loader/efi_net.c:858: efi_network_timer_notify: Assertion `__efi_entry_check()' failed.
This happens due to the following EFIAPI functions call chain:
efi_start_image()
efi_disk_read_blocks()
(due to the missing EFI_CALL, entry_count == 2)
efi_network_timer_notify()
Link: https://github.com/ARM-software/arm-systemready/releases/download/v25.12_DT_3.1.1/systemready-dt_acs_live_image.wic.xz [1]
Fixes: ce3dbc5d080d ("efi_loader: add UEFI GPT measurement")
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Masahisa Kojima <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Acked-by: Masahisa Kojima <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Change fwu_state_machine_updates() to accept an enum fwu_bank_states
parameter instead of a boolean. This makes the function interface more
explicit and prepares for adding FWU_BANK_INVALID support to handle
boot failures on the active bank.
Convert the FWU_BANK_* defines to an enum and update all call sites
accordingly.
Signed-off-by: Kory Maincent <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
The efi_reinstall_protocol_interface() function is a UEFI function;
make sure to call it from within U-Boot using the EFI_CALL() macro.
This fixes the following assertion:
lib/efi_loader/efi_boottime.c:3752: efi_reinstall_protocol_interface: Assertion `__efi_entry_check()' failed.
To reproduce the issue, define LOG_DEBUG in lib/efi_loader/efi_boottime.c
and build u-boot for your platform. Then, boot the U-Boot helloworld.efi
application over the network. Example commands (adjust the URL and boot
entry number):
=> efidebug boot add -u 0 net http://10.0.2.2:8000/helloworld.efi
=> efidebug boot order 0
=> bootefi bootmgr
Fixes: dd5d82a59995 ("efi_loader: efi_net: Add device path cache")
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Adriano Cordova <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
When adding a new EFI Debug Image Info entry, we allocate memory for a new
EFI Debug Image Info Normal structure and we add a new entry into the EFI
Debug Image Info Table, which is in fact just a pointer to the allocated
structure.
However, when allocating memory for the new structure we allocate memory
for the wrong type, leading to allocating memory for just a pointer instead
of the desired structure.
Fix the type used during allocation.
Fixes: 146546138af5 ("efi: add EFI_DEBUG_IMAGE_INFO for debug")
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Ying-Chun Liu (PaulLiu) <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Change the EFI variable load message from log_err() to log_info() with
neutral wording. The previous "Failed to load" message caused customer
confusion as it appeared to indicate an error condition.
The efi_var_from_file() function deliberately returns EFI_SUCCESS in
this case to allow the boot process to continue normally. This is
documented in the function's comment block but was not reflected in
the log message level or content.
The message now uses informational wording to reflect that this is
normal behavior when the ubootefi.var file does not yet exist.
Signed-off-by: Pranav Tilak <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
The efi_exit() function frees the loaded image memory by calling
efi_delete_image(). However, when CONFIG_EFI_TCG2_PROTOCOL is enabled, the
image_obj->image_type structure member is accessed after the memory has
been freed.
Fix this by performing the tcg2 measurement before the image deletion.
Fixes: 8fc4e0b4273a ("efi_loader: add boot variable measurement")
Suggested-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Masahisa Kojima <[email protected]>
Acked-by: Masahisa Kojima <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Our last sync with the kernel was 5.1.
We are so out of sync now, that tracking the patches and backporting
them one by one makes little sense and it's going to take ages.
This is an attempt to sync up Makefiles to 6.1.
Unfortunately due to sheer amount of patches this is not easy to review,
but that's what we decided during a community call for the bump to 5.1,
so we are following the same guidelines here.
Signed-off-by: Sughosh Ganu <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>a #rebased on -next
|
|
The EFI spec in §8.5.5 says
"The directory \EFI\UpdateCapsule is checked for capsules only within
the EFI system partition on the device specified in the active boot
option determine by reference to BootNext variable or BootOrder variable
processing."
Automatically generated boot options don't point to the ESP, they point to
the disk itself and find_handle() won't match when searching for an ESP
during a capsule update.
This happens because find_handle() only matches device paths that are
shorter or equal to the device path passed as an argument.
Since the EFI spec allows it we want to allow capsule updates, when the
boot option points to a disk, but that disk contains an ESP with a
\EFI\UpdateCapsule directory.
So, let's change device_is_present_and_system_part() and check if the
supplied device path contains an ESP. If it does return the handle of
the device. Otherwise, iterate over child devices and return the handle
of the first child that contains an ESP.
The returned handle can then be reused later. Rather than calling
efi_fs_from_path(), we can simply look up the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
on the discovered handle, avoiding the need to re-parse device paths.
Reported-by: Balaji Selvanathan <[email protected]>
Reported-by: John Toomey <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Prepare v2026.01-rc4
|
|
get_dp_device() is used to derive the device path from a boot variable.
However, if the last efi_get_variable_int() call fails, we return an
error without freeing 'buf'.
There's no need to call efi_get_variable_int() for variables we don't
know the size since we have the efi_get_var() wrapper.
Replace that in the two instances we use it. The first one will also
fix the memory leak.
A nice sideeffect is that the code size is also reduced, since we are
re-using functions instead of open coding them
$~ bloat-o-meter u-boot u-boot.new
add/remove: 0/0 grow/shrink: 1/2 up/down: 6/-196 (-190)
Function old new delta
version_string 70 76 +6
efi_launch_capsules 2288 2196 -92
get_dp_device 244 140 -104
Total: Before=1222331, After=1222141, chg -0.02%
Fixes: c74cd8bd08d1 ("efi_loader: capsule: add capsule_on_disk support")
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
add sm3 256 hash support, so TPM2 chips which report
5 pcrs with sm3 hash do not fail with:
u-boot=> tpm2 autostart
tpm2_get_pcr_info: too many pcrs: 5
Error: -90
Signed-off-by: Heiko Schocher <[email protected]>
|
|
The fitImage may be stored in EFI update capsule at address that
is not aligned to 8 bytes. Since fitImage is a DT, new version of
libfdt 1.7.2 rejects such an unaligned DT. Patch the code and copy
the fitImage into aligned buffer in case it is not aligned. This
does increase overhead for unaligned fitImages in EFI capsules, but
tries to keep the overhead low for aligned ones.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
%s/eventfor/event for/
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
%s/mange/manage/
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
When editing eficonfig "optional data" (typically cmdline arguments)
it's useful to be able to edit the string rather than having to re-type
the entire thing. Implement support for editing buffers to make this a
whole lot nicer. Specifically, add support for moving the cursor with
the arrow keys and End key as well as deleting backwards with the delete
key.
Signed-off-by: Casey Connolly <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Tested-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Use the Debug Image Info Table GUID definition from efi_api.h instead or
redefining it locally.
Signed-off-by: Vincent Stehlé <[email protected]>
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Tom Rini <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
We currently set the firmware image type to ESRT_FW_TYPE_UNKNOWN.
The spec defines the following:
ESRT_FW_TYPE_UNKNOWN 0x00000000
ESRT_FW_TYPE_SYSTEMFIRMWARE 0x00000001
ESRT_FW_TYPE_DEVICEFIRMWARE 0x00000002
ESRT_FW_TYPE_UEFIDRIVER 0x00000003
Since we don't support updating DEVICEFIRMWARE or UEFIDRIVER types,
let's switch over to SYSTEMFIRMWARE which seems more appropriate.
Suggested-by: Michal Simek <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
In function efi_http_service_binding_destroy_child() phandler is created as
as a local variable. If efi_search_protocol() fails, phandler will hold a
random value from the stack. Even it is not zero, we must not use it.
If efi_search_protocol() succeeds, the pointer has already be dereferenced,
so checking against NULL makes not sense here.
If ChildHandle is not a valid UEFI handle, we must return
EFI_INVALID_PARAMETER.
Use a single location for EFI_EXIT().
Addresses-Coverity-ID: CID 531974 (Unchecked return value)
Fixes: 5753dc3f6572 ("efi_loader: Prevent dereference of uninitialised variable")
Reviewed-by: Ilias Apalodimas <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
After the malloc of tmp_files and before its value is recorded an early
exit will need to free tmp_files to prevent leaking that memory.
This issue was found by Smatch.
Signed-off-by: Andrew Goodbody <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
Enhances the process for identifying disk images within the EFI boot
manager. Utilize part_driver_lookup_type() to verify the validity of a
downloaded file as a disk image, rather than depending on file
extensions.
part_driver_lookup_type() is now used in the prepare_loaded_image()
function in the EFI boot manager to detect partitions on a block device
created from a downloaded image. This allows the boot manager to boot
from any disk image that can be recognized by a partition driver, not
just ISO and IMG images.
Update prepare_loaded_image() to create the ramdisk block device
internally, obtain the blk_desc and use part_driver_lookup_type() to
detect a valid partition table.
In try_load_from_uri_path(), try prepare_loaded_image() first to detect
disk images, and fall back to PE-COFF detection only if that fails.
Signed-off-by: Javier Tia <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
There are 3 options listed between choice/endchoice FILE/TEE/NO_STORE.
There is no reason to add other config with dependencies between
choice/endchoice because they can never be selected because they depends on
only that 3 options which can be selected.
That's why move additional configuration with dependency below choice
section.
Signed-off-by: Michal Simek <[email protected]>
|
|
This is needed because distro_efi_read_bootflow_net will then need
dhcp_run which is not already enabled by CMD_NET.
Signed-off-by: Jan Kiszka <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
|
|
When doing compile testing build we cannot rely on having a valid file
for EFI_VAR_SEED_FILE to exist, so disable this option when doing
compile tests.
Signed-off-by: Tom Rini <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Acked-by: Heinrich Schuchardt <[email protected]>
|
|
The UEFI 2.11 specification, chapter 23.1.3 requires
EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImageInfo() to return
EFI_INVALID_PARAMETER if *ImageInfoSize is not too small
and ImageInfo is NULL.
Fixes: f27c20148511 ("efi_loader: add firmware management protocol for FIT image")
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
With the current code we allocate to little memory when adding entries to
the EFI_DEBUG_INFO_TABLE and we fail to correctly move entries when an
entry is removed.
EFI_DEBUG_TABLE_ENTRY_SIZE must be the size of an entry in the
EFI_DEBUG_INFO_TABLE, not the size of a pointer.
Fixes: 146546138af5 ("efi: add EFI_DEBUG_IMAGE_INFO for debug")
Addresses-Coverity-ID: CID 569498: Code maintainability issues (SIZEOF_MISMATCH)
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Avoid copying to NULL if out of memory.
Fixes: 3c08df58cc43 ("lib: efi_loader: efi_memory.c: add efi_realloc() for realloc memory")
Addresses-Coverity-ID: 569499: Null pointer dereferences (NULL_RETURNS)
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Heinrich Schuchardt <[email protected]>
|
|
Create a Kconfig which indicates that EFI functionality is in use,
either as a client (EFI app / stub) or provider (EFI loader). This will
make it easier to share code between these two parts of U-Boot
Signed-off-by: Simon Glass <[email protected]>
|
|
This directory was created when U-Boot gained the ability to run as an
EFI app in 2015. Since then the EFI-loader feature has been added.
The code in lib/efi is not actually used by the loader, so the name is
confusing.
Rename the directory to efi_client to indicate that it includes files
just for U-Boot being a client of EFI, i.e. the EFI app and stub.
Signed-off-by: Simon Glass <[email protected]>
|
|
|
|
Provide a test application to dump the EFI_DEBUG_IMAGE_INFO_TABLE
as implemented in EDK II.
EFI_DEBUG_IMAGE_INFO is not packed in contrast to many other EFI
structures.
As of today EDK II when removing an entry in the EfiDebugImageInfoTable
just sets NormalImage = NULL but does not compact the array. So
TableSize reflects the number of non-NULL entries and not the array
size as reported independently in
https://github.com/tianocore/edk2/pull/11013 and
https://github.com/tianocore/edk2/pull/11019.
The current implementation tolerates this deviation from the UEFI
specification.
This is what the output may look like:
Debug Info Table Dump
=====================
=> dump
Modified
Number of entries: 0x0000004a
Info type 0x00000001
Address: [0x000000008315a000, 0x00000000831bafff]
File: FvFile(D6A2CB7F-6A18-4E2F-B43B-9920A733700A)
Handle: 0x000000017fe3cb18
...
Info type 0x00000001
Address: [0x000000017e8db000, 0x000000017ea00f3f]
File: FvFile(7C04A583-9E3E-4F1C-AD65-E05268D0B4D1)
Handle: 0x000000017f358e98
Info type 0x00000001
Address: [0x000000017eae5000, 0x000000017eae81ff]
File: \dbginfodump.efi
Handle: 0x000000017eaf0298
=>
Signed-off-by: Heinrich Schuchardt <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
This commit adds the functionality of generate EFI_DEBUG_IMAGE_INFO
while loading the image.
This feature is described in UEFI Spec 2.10. Section 18.4.3.
The implementation ensures support for hardware-assisted debugging and
provides a standardized mechanism for debuggers to discover the load
address of an EFI application.
Cc: Ilias Apalodimas <[email protected]>
Cc: Peter Robinson <[email protected]>
Cc: Simon Glass <[email protected]>
Signed-off-by: Ying-Chun Liu (PaulLiu) <[email protected]>
Tested-by: Heinrich Schuchardt <[email protected]>
Acked-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add efi_realloc() for realloc memory that previously alloc by efi_alloc().
Note that if realloced memory is explicitly allocated as BootServicesData.
Cc: Heinrich Schuchardt <[email protected]>
Cc: Ilias Apalodimas <[email protected]>
Cc: Peter Robinson <[email protected]>
Cc: Simon Glass <[email protected]>
Signed-off-by: Ying-Chun Liu (PaulLiu) <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
EFI_DEBUG_IMAGE_INFO_TABLE is used to store EFI_LOADED_IMAGE for
debug purpose. This commit adds the table to the EFI_CONFIGURATION_TABLE.
This feature is described in UEFI Spec version 2.10. Section 18.4.
The implementation ensures support for hardware-assisted debugging and
provides a standardized mechanism for debuggers to discover and interact
with system-level debug resources.
Cc: Heinrich Schuchardt <[email protected]>
Cc: Peter Robinson <[email protected]>
Cc: Simon Glass <[email protected]>
Signed-off-by: Ying-Chun Liu (PaulLiu) <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Add EFI_SYSTEM_TABLE_POINTER structure for remote debugger to locate
the address of EFI_SYSTEM_TABLE.
This feature is described in UEFI SPEC version 2.10. Section 18.4.2.
The implementation ensures support for hardware-assisted debugging and
provides a standardized mechanism for debuggers to discover the EFI
system table.
Cc: Peter Robinson <[email protected]>
Cc: Simon Glass <[email protected]>
Signed-off-by: Ying-Chun Liu (PaulLiu) <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Tested-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]> # change memset(systab_pointer, 0 ...) -> systab_pointer->crc32 = 0;
Signed-off-by: Ilias Apalodimas <[email protected]>
|
|
Taking a goto to out_of_resources before receive_lengths is assigned
will result in an attempt to free an unitialised pointer. Instead
initialise receive_lengths to NULL on declaration to prevent this from
occurring.
This issue was found by Smatch.
Reviewed-by: Heinrich Schuchardt <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Signed-off-by: Andrew Goodbody <[email protected]>
Signed-off-by: Ilias Apalodimas <[email protected]>
|
