diff options
| author | karlf <[email protected]> | 2016-08-11 13:28:13 -0700 |
|---|---|---|
| committer | karlf <[email protected]> | 2016-08-11 13:28:13 -0700 |
| commit | 96eb96dfb613e4c745db6bd1f53a92fe7e2290fc (patch) | |
| tree | ad5f3ede5cbcd6b598677ce41bcf8318471bdd92 /network/wlan/WDI/HEADER/HalDef.h | |
| parent | 687b274aa38fd05c8c26e3068932121876d7f745 (diff) | |
Updated for "Windows 10 Anniversary Update" (Version 1607)
Diffstat (limited to 'network/wlan/WDI/HEADER/HalDef.h')
| -rw-r--r-- | network/wlan/WDI/HEADER/HalDef.h | 3076 |
1 files changed, 0 insertions, 3076 deletions
diff --git a/network/wlan/WDI/HEADER/HalDef.h b/network/wlan/WDI/HEADER/HalDef.h deleted file mode 100644 index 5a76ec83..00000000 --- a/network/wlan/WDI/HEADER/HalDef.h +++ /dev/null @@ -1,3076 +0,0 @@ -#ifndef __INC_HALDEF_H -#define __INC_HALDEF_H - -// -// General Definition for -// -/* Common definition for all 819x series driver */ - -// -// 2012/02/02 MH Add HW IC support here. To repacle the definition from precomp.h -// to current position. If Linux need to use small HAl code size, please disable -// IC support. We will list all IC support ability here. -// -#define RTL8192S_SUPPORT 0 -#define RTL8192C_SUPPORT 0 -#define RTL8192D_SUPPORT 0 -#define RTL8723A_SUPPORT 0 -#define RTL8195A_SUPPORT 0 -#define RTL8723B_SUPPORT 1 -#if(MS_SUPPORT == 0) -#define RTL8703B_SUPPORT 0 -#define RTL8188E_SUPPORT 0 -#define RTL8812A_SUPPORT 0 -#define RTL8821A_SUPPORT 0 -#define RTL8192E_SUPPORT 0 -#define RTL8814A_SUPPORT 0 -#define RTL8821B_SUPPORT 0 -#define RTL8822B_SUPPORT 0 -#define RTL8188F_SUPPORT 0 -#define RTL8723D_SUPPORT 0 - -#define TESTCHIP_SUPPORT 1 -#else -#define RTL8703B_SUPPORT 0 -#define RTL8188E_SUPPORT 0 -#define RTL8812A_SUPPORT 0 -#define RTL8821A_SUPPORT 0 -#define RTL8192E_SUPPORT 0 -#define RTL8814A_SUPPORT 0 -#define RTL8821B_SUPPORT 0 -#define RTL8822B_SUPPORT 0 -#define RTL8188F_SUPPORT 0 -#define RTL8723D_SUPPORT 0 - -#define TESTCHIP_SUPPORT 0 -#endif -// -// For different HW register polling type definition. -// -#define REG_POLL_1BYTE_EQU 0 -#define REG_POLL_2BYTE_EQU 1 -#define REG_POLL_4BYTE_EQU 2 -#define REG_POLL_1BYTE_BIT_MASK 3 -#define REG_POLL_2BYTE_BIT_MASK 4 -#define REG_POLL_4BYTE_BIT_MASK 5 - -// -// For different memory size setting, you can switch HW IC support. -// - - -#define RTL819X_NO_SCAN_AFTER_LINK 0 - -#define U1DONTCARE 0xFF -#define U2DONTCARE 0xFFFF - -#define INTEL_VENDOR_ID 0x8086 -#define SIS_VENDOR_ID 0x1039 -#define ATI_VENDOR_ID 0x1002 -#define ATI_DEVICE_ID 0x7914 -#define AMD_VENDOR_ID 0x1022 - -#define MIN_DESC_BUFFER_LENGTH 5 - -// -// 2011/09/07 MH Add for different channel plan power index offset -// -#define PWR_IDX_GROUP_NUM 4 // CCK/Legacyofdm/HT20/HT40 - -typedef enum _PCI_BRIDGE_VENDOR -{ - PCI_BRIDGE_VENDOR_INTEL = 0, - PCI_BRIDGE_VENDOR_ATI, - PCI_BRIDGE_VENDOR_AMD, - PCI_BRIDGE_VENDOR_SIS, - PCI_BRIDGE_VENDOR_UNKNOWN, - PCI_BRIDGE_VENDOR_MAX -} PCI_BRIDGE_VENDOR; - - -typedef enum _GPIORF_CONTROL{ - GPIORF_START = 0, - GPIORF_STOP = 1, - GPIORF_POLLING = 2, -}GPIORF_CONTROL; - - -typedef enum _POWER_SAVE_MODE // <power save mode> parameter of MlmePowerMgt -{ - POWER_SAVE_MODE_ACTIVE, - POWER_SAVE_MODE_SAVE, -}POWER_SAVE_MODE; - -// -// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06. -// -typedef enum _RT_MULTI_FUNC{ - RT_MULTI_FUNC_NONE = 0x00, - RT_MULTI_FUNC_WIFI = 0x01, - RT_MULTI_FUNC_BT = 0x02, - RT_MULTI_FUNC_GPS = 0x04, -}RT_MULTI_FUNC,*PRT_MULTI_FUNC; - - -#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) -#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) - -// -// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08. -// -typedef enum _RT_POLARITY_CTL{ - RT_POLARITY_LOW_ACT = 0, - RT_POLARITY_HIGH_ACT = 1, -}RT_POLARITY_CTL,*PRT_POLARITY_CTL; - -// For RTL8723 regulator mode. by tynli. 2011.01.14. -typedef enum _RT_REGULATOR_MODE{ - RT_SWITCHING_REGULATOR = 0, - RT_LDO_REGULATOR = 1, -}RT_REGULATOR_MODE,*PRT_REGULATOR_MODE; - - -typedef enum _DBI_TYPE -{ - DBI_READ, - DBI_WRITE -} DBI_TYPE, *PDBI_TYPE; - - -#define HAL_TIMER_OWNER_P2P_POWERSAVE BIT0 -#define HAL_TIMER_OWNER_TDLS_OFF_CHNL_TRIGGER BIT1 -#define HAL_TIMER_OWNER_TDLS_OFF_CHNL_TIMEOUT BIT2 -#define HAL_TIMER_OWNER_MULTICHANNEL_SWITCH BIT3 - -#define HAL_TIMEOUT_REASON_INTERRUPT 1 -#define HAL_TIMEOUT_REASON_HALT 2 - - -typedef VOID -(*HAL_TIMER_CALLBACK)( - IN PVOID pContext - ); - -typedef struct _HAL_TIMER_STATE -{ - RT_LIST_ENTRY List; - u4Byte TimerOwners; // The owners who have the timeout values. - BOOLEAN bAbsolute; // True if the timeout is TSF matched with Timeout. - u8Byte Timeout; // Timeout TSF timer for client mode. - PVOID pContext; // Timeout callback context. - HAL_TIMER_CALLBACK callbackFunc; // The timeout callback function. -}HAL_TIMER_STATE, *PHAL_TIMER_STATE; - -#define HAL_TIMER_FILL_TIMER_STATE(__pHalTimerState, __Owner, __DelayUs, __pContext, __Callback) \ -{ \ - (__pHalTimerState)->TimerOwners = __Owner; \ - (__pHalTimerState)->bAbsolute = FALSE; \ - (__pHalTimerState)->Timeout = __DelayUs; \ - (__pHalTimerState)->pContext = __pContext; \ - (__pHalTimerState)->callbackFunc = __Callback; \ -} - -#define HAL_TIMER_FILL_TIMER_STATE_FULL_TSF_TIME(__pHalTimerState, __Owner, __TsfUs, __pContext, __Callback) \ -{ \ - (__pHalTimerState)->TimerOwners = __Owner; \ - (__pHalTimerState)->bAbsolute = TRUE; \ - (__pHalTimerState)->Timeout = __TsfUs; \ - (__pHalTimerState)->pContext = __pContext; \ - (__pHalTimerState)->callbackFunc = __Callback; \ -} - - -typedef enum _RT_AMPDU_BRUST_MODE{ - RT_AMPDU_BRUST_NONE = 0, - RT_AMPDU_BRUST_92D = 1, - RT_AMPDU_BRUST_88E = 2, - RT_AMPDU_BRUST_8812_4 = 3, - RT_AMPDU_BRUST_8812_8 = 4, - RT_AMPDU_BRUST_8812_12 = 5, - RT_AMPDU_BRUST_8812_15 = 6, - RT_AMPDU_BRUST_8723B = 7, - RT_AMPDU_BRUST_8814A= 8, - RT_AMPDU_BRUST_8822B= 9 - -}RT_AMPDU_BRUST,*PRT_AMPDU_BRUST_MODE; - - -// The power in dbm we never support. So define it as the unspecified power. -#define UNSPECIFIED_PWR_DBM (~0x7F) - -// RF Off Level for IPS or HW/SW radio off -#define RT_RF_OFF_LEVL_ASPM BIT0 // PCI ASPM -#define RT_RF_OFF_LEVL_CLK_REQ BIT1 // PCI clock request -#define RT_RF_OFF_LEVL_PCI_D3 BIT2 // PCI D3 mode -#define RT_RF_OFF_LEVL_HALT_NIC BIT3 // NIC halt, re-initialize hw parameters -#define RT_RF_OFF_LEVL_FREE_FW BIT4 // FW free, re-download the FW -#define RT_RF_OFF_LEVEL_FW_IPS_32K BIT5 // FW in IPS 32k -#define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT6 // Always enable ASPM and Clock Req in initialization. -#define RT_RF_OFF_LEVEL_RTD3 BIT7 // Follow wowlan Hw flow and control RF on/off by Fw -#define RT_RF_LPS_P2P_PS BIT29 // It's a P2P Power Save -#define RT_RF_LPS_DISALBE_2R BIT30 // When LPS is on, disable 2R if no packet is received or transmittd. -#define RT_RF_LPS_LEVEL_ASPM BIT31 // LPS with ASPM - - -// ASPM OSC Control bit, added by Roger, 2013.03.29. -#define RT_PCI_ASPM_OSC_IGNORE 0 // PCI ASPM ignore OSC control in default -#define RT_PCI_ASPM_OSC_ENABLE BIT0 // PCI ASPM controlled by OS according to ACPI Spec 5.0 -#define RT_PCI_ASPM_OSC_DISABLE BIT1 // PCI ASPM controlled by driver or BIOS, i.e., force enable ASPM - -// ASPM Backdoor Control -#define RT_PCI_BC_CLK_REQ BIT0 -#define RT_PCI_BC_ASPM_L0s BIT1 -#define RT_PCI_BC_ASPM_L1 BIT2 -#define RT_PCI_BC_ASPM_L1Off BIT3 -#define RT_PCI_BC_ASPM_LTR BIT4 -#define RT_PCI_BC_ASPM_OBFF BIT5 - -#if (RTL8723B_SUPPORT == 1) -// RTL8723B Series -#define IS_HARDWARE_TYPE_8723BE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723BE) -#define IS_HARDWARE_TYPE_8723BS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723BS) -#define IS_HARDWARE_TYPE_8723BU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723BU) -#define IS_HARDWARE_TYPE_8723B(_Adapter) \ -(IS_HARDWARE_TYPE_8723BE(_Adapter) || IS_HARDWARE_TYPE_8723BU(_Adapter) || IS_HARDWARE_TYPE_8723BS(_Adapter) ) -#else -#define IS_HARDWARE_TYPE_8723BE(_Adapter) FALSE -#define IS_HARDWARE_TYPE_8723BS(_Adapter) FALSE -#define IS_HARDWARE_TYPE_8723BU(_Adapter) FALSE -#define IS_HARDWARE_TYPE_8723B(_Adapter) FALSE -#endif - -// RTL8188E Series -#define IS_HARDWARE_TYPE_8188EE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188EE) -#define IS_HARDWARE_TYPE_8188EU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188EU) -#define IS_HARDWARE_TYPE_8188ES(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188ES) - -#define IS_HARDWARE_TYPE_8188E(_Adapter) \ -(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || IS_HARDWARE_TYPE_8188ES(_Adapter)) - -#define IS_HARDWARE_TYPE_OLDER_THAN_8812A(_Adapter) \ - (IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || IS_HARDWARE_TYPE_8188ES(_Adapter)) - -// RTL8812 Series -#define IS_HARDWARE_TYPE_8812AE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8812E) -#define IS_HARDWARE_TYPE_8812AU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8812AU) -#define IS_HARDWARE_TYPE_8812A(_Adapter) \ - (IS_HARDWARE_TYPE_8812AE(_Adapter) || IS_HARDWARE_TYPE_8812AU(_Adapter)) - - -// RTL8821 Series -#define IS_HARDWARE_TYPE_8821AE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821E) -#define IS_HARDWARE_TYPE_8811AU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8811AU) -#define IS_HARDWARE_TYPE_8821AU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821U) -#define IS_HARDWARE_TYPE_8821U(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821U ||\ - ((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8811AU) -#define IS_HARDWARE_TYPE_8821S(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821S) -#define IS_HARDWARE_TYPE_8821(_Adapter) \ - (IS_HARDWARE_TYPE_8821AE(_Adapter) || IS_HARDWARE_TYPE_8821U(_Adapter)|| IS_HARDWARE_TYPE_8821S(_Adapter)) -#define IS_HARDWARE_TYPE_8821A(_Adapter) \ - (IS_HARDWARE_TYPE_8821AE(_Adapter) || IS_HARDWARE_TYPE_8821U(_Adapter)|| IS_HARDWARE_TYPE_8821S(_Adapter)) - -#define IS_HARDWARE_TYPE_JAGUAR(_Adapter) \ -(IS_HARDWARE_TYPE_8812A(_Adapter) || IS_HARDWARE_TYPE_8821(_Adapter)) - -#define IS_HARDWARE_TYPE_8821BE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821BE) -#define IS_HARDWARE_TYPE_8821BU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821BU) -#define IS_HARDWARE_TYPE_8821BS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8821BS) -#define IS_HARDWARE_TYPE_8821B(_Adapter) \ -(IS_HARDWARE_TYPE_8821BE(_Adapter) || IS_HARDWARE_TYPE_8821BU(_Adapter) || IS_HARDWARE_TYPE_8821BS(_Adapter)) - -#define IS_HARDWARE_TYPE_8822BE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8822BE) -#define IS_HARDWARE_TYPE_8822BU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8822BU) -#define IS_HARDWARE_TYPE_8822BS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8822BS) -#define IS_HARDWARE_TYPE_8822B(_Adapter) \ -(IS_HARDWARE_TYPE_8822BE(_Adapter) || IS_HARDWARE_TYPE_8822BU(_Adapter) || IS_HARDWARE_TYPE_8822BS(_Adapter)) - - -#define IS_HARDWARE_TYPE_JAGUAR2(_Adapter) \ -(IS_HARDWARE_TYPE_8814A(_Adapter) || IS_HARDWARE_TYPE_8821B(_Adapter) || IS_HARDWARE_TYPE_8822B(_Adapter)) - -#define IS_HARDWARE_TYPE_JAGUAR_AND_JAGUAR2(_Adapter) \ -(IS_HARDWARE_TYPE_JAGUAR(_Adapter) || IS_HARDWARE_TYPE_JAGUAR2(_Adapter)) - - -//RTL8192E Series -#define IS_HARDWARE_TYPE_8192EE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192EE) -#define IS_HARDWARE_TYPE_8192EU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192EU) -#define IS_HARDWARE_TYPE_8192ES(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8192ES) - -#define IS_HARDWARE_TYPE_8192E(_Adapter) \ -(IS_HARDWARE_TYPE_8192EE(_Adapter) || IS_HARDWARE_TYPE_8192EU(_Adapter) ||IS_HARDWARE_TYPE_8192ES(_Adapter)) - -//RTL8814A Series -#define IS_HARDWARE_TYPE_8814AE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8814AE) -#define IS_HARDWARE_TYPE_8814AU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8814AU) -#define IS_HARDWARE_TYPE_8814AS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8814AS) - -#define IS_HARDWARE_TYPE_8814A(_Adapter) \ -(IS_HARDWARE_TYPE_8814AE(_Adapter) || IS_HARDWARE_TYPE_8814AU(_Adapter) ||IS_HARDWARE_TYPE_8814AS(_Adapter)) - -//RTL8723D Series -#define IS_HARDWARE_TYPE_8723DE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723DE) -#define IS_HARDWARE_TYPE_8723DU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723DU) -#define IS_HARDWARE_TYPE_8723DS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8723DS) - -#define IS_HARDWARE_TYPE_8723D(_Adapter) \ -(IS_HARDWARE_TYPE_8723DE(_Adapter) || IS_HARDWARE_TYPE_8723DU(_Adapter) ||IS_HARDWARE_TYPE_8723DS(_Adapter)) - - -#define IS_HARDWARE_TYPE_UNKNOWN(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_MAX) - -#define IS_DUAL_BAND_SUPPORT(_Adapter) (( (GET_HAL_DATA(_Adapter)->BandSet == BAND_ON_BOTH )? TRUE:FALSE)) - -// RTL8703B Series -#define IS_HARDWARE_TYPE_8703BE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8703BE) -#define IS_HARDWARE_TYPE_8703BS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8703BS) -#define IS_HARDWARE_TYPE_8703BU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8703BU) -#define IS_HARDWARE_TYPE_8703B(_Adapter) \ -(IS_HARDWARE_TYPE_8703BE(_Adapter) || IS_HARDWARE_TYPE_8703BU(_Adapter) || IS_HARDWARE_TYPE_8703BS(_Adapter) ) - -#define IS_HALF_CAM_ENTEY_SERIES(_Adapter) (IS_HARDWARE_TYPE_8703B(_Adapter) || IS_HARDWARE_TYPE_8188F(_Adapter)) - -#define IS_ONE_BYTE_ALIGNED_SERIES(_Adapter) (IS_HARDWARE_TYPE_8703B(_Adapter) || IS_HARDWARE_TYPE_8188F(_Adapter) || IS_HARDWARE_TYPE_8822B(_Adapter)) - -#define IS_EFUSE_RECOVERY_NEEDED_SERIES(_Adapter) (IS_HARDWARE_TYPE_8188E(_Adapter) || IS_HARDWARE_TYPE_8723B(_Adapter) || IS_HARDWARE_TYPE_8192E(_Adapter)) - -#define IS_NEW_USB_RXAGG_SERIES(_Adapter) (IS_HARDWARE_TYPE_8703BU(_Adapter) || IS_HARDWARE_TYPE_8723DU(_Adapter) || IS_HARDWARE_TYPE_8822BU(_Adapter)) - -// RTL8188F Series -#define IS_HARDWARE_TYPE_8188FE(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188FE) -#define IS_HARDWARE_TYPE_8188FS(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188FS) -#define IS_HARDWARE_TYPE_8188FU(_Adapter) (((PADAPTER)_Adapter)->HardwareType==HARDWARE_TYPE_RTL8188FU) -#define IS_HARDWARE_TYPE_8188F(_Adapter) \ -( IS_HARDWARE_TYPE_8188FE(_Adapter) || IS_HARDWARE_TYPE_8188FS(_Adapter) || IS_HARDWARE_TYPE_8188FU(_Adapter) ) - -#define RT_DISABLE_ASPM(_PADAPTER) -#define RT_ENABLE_ASPM(_PADAPTER) -#define RT_ENTER_D3(_PADAPTER, _bTempSetting) -#define RT_LEAVE_D3(_PADAPTER, _bTempSetting) -#define RT_DBG_YB(_PADAPTER, _Offset) - - -#define RT_CHECK_TX_IO_QUEUE_EMPTY(_PADAPTER) PlatformSdioTxAndAwbQueueEmpty(_PADAPTER) -#define RT_CHECK_TX_QUEUE_IDX_EMPTY(_PADAPTER, _QIDX) PlatformSdioTxQueueIdxEmpty(_PADAPTER, _QIDX) - -#define RT_IS_DC_MODE(_pPSC) IsCurrDCMode(_pPSC) - -#define HW_ENABLE_TX_ALL 0 -#define HW_DISABLE_TX_ALL 1 -#define HW_DISABLE_TX_DATA 2 -#define HW_DISABLE_TX_BEACON 3 -#define HW_ENABLE_TX_BEACON 4 - -// Fw PS state for RPWM. -/* - BIT[2:0] = HW state - BIT[3] = Protocol PS state, 1: register active state , 0: register sleep state - BIT[4] = sub-state -*/ -#define FW_PS_GO_ON BIT(0) -#define FW_PS_TX_NULL BIT(1) -#define FW_PS_RF_ON BIT(2) -#define FW_PS_REGISTER_ACTIVE BIT(3) - -#define FW_PS_DPS BIT0 -#define FW_PS_LCLK (FW_PS_DPS) -#define FW_PS_RF_OFF BIT1 -#define FW_PS_ALL_ON BIT2 -#define FW_PS_ST_ACTIVE BIT3 -//#define FW_PS_LP BIT4 // low performance -#define FW_PS_ISR_ENABLE BIT4 -#define FW_PS_IMR_ENABLE BIT5 - - -#define FW_PS_ACK BIT6 -#define FW_PS_TOGGLE BIT7 - - // 88E RPWM value - // BIT[0] = 1: 32k, 0: 40M -#define FW_PS_CLOCK_OFF BIT0 // 32k -#define FW_PS_CLOCK_ON 0 // 40M - -#define FW_PS_STATE_MASK (0x0F) -#define FW_PS_STATE_HW_MASK (0x07) -#define FW_PS_STATE_INT_MASK (0x3F) // ISR_ENABLE, IMR_ENABLE, and PS mode should be inherited. - -#define FW_PS_STATE(x) (FW_PS_STATE_MASK & (x)) -#define FW_PS_STATE_HW(x) (FW_PS_STATE_HW_MASK & (x)) -#define FW_PS_STATE_INT(x) (FW_PS_STATE_INT_MASK & (x)) -#define FW_PS_ISR_VAL(x) ((x) & 0x70) -#define FW_PS_IMR_MASK(x) ((x) & 0xDF) -#define FW_PS_KEEP_IMR(x) ((x) & 0x20) - - -#define FW_PS_STATE_S0 (FW_PS_DPS) -#define FW_PS_STATE_S1 (FW_PS_LCLK) -#define FW_PS_STATE_S2 (FW_PS_RF_OFF) -#define FW_PS_STATE_S3 (FW_PS_ALL_ON) -#define FW_PS_STATE_S4 ((FW_PS_ST_ACTIVE) | (FW_PS_ALL_ON)) - -#define FW_PS_STATE_ALL_ON_88E (FW_PS_CLOCK_ON) // ((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE)) -#define FW_PS_STATE_RF_ON_88E (FW_PS_CLOCK_ON) // (FW_PS_RF_ON) -#define FW_PS_STATE_RF_OFF_88E (FW_PS_CLOCK_ON) // 0x0 -#define FW_PS_STATE_RF_OFF_LOW_PWR_88E (FW_PS_CLOCK_OFF) // (FW_PS_STATE_RF_OFF) - -#define FW_PS_STATE_ALL_ON_92C (FW_PS_STATE_S4) -#define FW_PS_STATE_RF_ON_92C (FW_PS_STATE_S3) -#define FW_PS_STATE_RF_OFF_92C (FW_PS_STATE_S2) -#define FW_PS_STATE_RF_OFF_LOW_PWR_92C (FW_PS_STATE_S1) - - -// For 88E H2C PwrMode Cmd ID 5. -#define FW_PWR_STATE_ACTIVE ((FW_PS_RF_ON) | (FW_PS_REGISTER_ACTIVE)) -#define FW_PWR_STATE_RF_OFF 0 - -#define FW_PS_IS_ACK(x) ((x) & FW_PS_ACK ) -#define FW_PS_IS_CLK_ON(x) ((x) & (FW_PS_RF_OFF |FW_PS_ALL_ON )) -#define FW_PS_IS_RF_ON(x) ((x) & (FW_PS_ALL_ON)) -#define FW_PS_IS_ACTIVE(x) ((x) & (FW_PS_ST_ACTIVE)) -#define FW_PS_IS_CPWM_INT(x) ((x) & 0x40) - -#define FW_CLR_PS_STATE(x) ((x) = ((x) & (0xF0))) - -#define IS_IN_LOW_POWER_STATE_88E(pAdapter, FwPSState) \ - (FW_PS_STATE(FwPSState) == FW_PS_CLOCK_OFF) - -#define IS_IN_LOW_POWER_STATE_92C(pAdapter, FwPSState) \ - ((FW_PS_STATE(FwPSState) == FW_PS_STATE_RF_OFF_LOW_PWR_92C) && \ - GET_POWER_SAVE_CONTROL(&(pAdapter->MgntInfo))->bLowPowerEnable) - -// -// <Roger_TODO> We should take RTL8723B into consideration, 2012.10.08 -// -#define IS_IN_LOW_POWER_STATE(_Adapter, _FwPSState) IS_IN_LOW_POWER_STATE_88E(_Adapter, _FwPSState) - - -#define HW_CLOCK_OFF_TIMEOUT 10 // unit: ms - -enum _Fw_Ps_State{ - FW_PS_STATE_ALL_ON = 0, - FW_PS_STATE_RF_ON = 1, - FW_PS_STATE_RF_OFF = 2, - FW_PS_STATE_RF_OFF_LOW_PWR = 3, -}; - -typedef enum _LOWPWR32K_EXCEPTION -{ - LOWPWR32K_EXCEPTION_NONE = 0x00, - LOWPWR32K_EXCEPTION_CPWM_LOST = 0x01, - LOWPWR32K_EXCEPTION_FW_HANG = 0x02, - LOWPWR32K_EXCEPTION_CANNOT_RECOVER_HW_CLK = 0x03, - LOWPWR32K_EXCEPTION_HW_POWER_OFF = 0x04, - LOWPWR32K_EXCEPTION_MAX -}LOWPWR32K_EXCEPTION; - -typedef enum _RSVDPAGE_TYPE -{ - RSVDPAGE_TYPE_BASIC = 0x00, - RSVDPAGE_TYPE_LPS = 0x01, - RSVDPAGE_TYPE_WOWLAN = 0x02, - RSVDPAGE_TYPE_FCS = 0x04, - RSVDPAGE_TYPE_BT = 0x08, - RSVDPAGE_TYPE_MAX = 0xffff -}RSVDPAGE_TYPE; - -typedef enum _RQPN_TYPE -{ - RQPN_TYPE_NORMAL = 0x00, - RQPN_TYPE_WOWLAN = 0x01, - RQPN_TYPE_MAX -}RQPN_TYPE; - -// ------------------------------------------------------------------------------------------------ -// Specific definition depend on different chipset -// ------------------------------------------------------------------------------------------------ -#define SILENT_RESET 0 - - - -// ------------------------------------------------------------------------------------------------ -// We can try to handle all Tx shift condition together!! -// This includes the TxDesc for 8187 and 8187B, TxFwInfo for 8190Pci, and other shift for 8190Usb -// Caution: This is not implement now!! -// ------------------------------------------------------------------------------------------------ - -// ------------------------------------------------------------------------------------------------ -// The definition for FindAdapter Procedure -// (1) PCI memory mapped IO range. -// (2) Revision ID -// (3) Default Hardware Type -// (4) Require IO mapped IO Even if Memory Mapped IO is applied -// ------------------------------------------------------------------------------------------------ - -#define HAL_HW_SDIO_8723S_PID 0x8723 // 8723S -#define HAL_HW_SDIO_8188E_PID 0x8179 //8188E -#define HAL_HW_SDIO_8821S_PID 0x8821 -#define HAL_HW_SDIO_8192ES_PID 0x818B -#define HAL_HW_SDIO_8723BS_PID_TEST_CHIP 0x8753 -#define HAL_HW_SDIO_8723BS_PID 0xB723 -#define HAL_HW_SDIO_8723BS_PID_ACER 0x0623 -#define HAL_HW_SDIO_8723BS_PID_HP 0x0523 -#define HAL_HW_SDIO_8814AS_PID 0x8813//20130415 KaiYuan add for 8814 Temp -#define HAL_HW_SDIO_8703BS_PID 0xB703 -#define HAL_HW_SDIO_8814AS_PID 0x8813//20130415 KaiYuan add for 8814 Temp -#define HAL_HW_SDIO_8821BS_PID 0xB821 -#define HAL_HW_SDIO_8822BS_PID 0xB822 -#define HAL_HW_SDIO_8188FS_PID 0xF179 -#define HAL_HW_SDIO_8723DS_PID 0xD723 //8723D - -#define HAL_HW_TYPE_ID_8723A 0x01 -#define HAL_HW_TYPE_ID_8188E 0x02 -#define HAL_HW_TYPE_ID_8812A 0x04 -#define HAL_HW_TYPE_ID_8821A 0x05 -#define HAL_HW_TYPE_ID_8723B 0x06 -#define HAL_HW_TYPE_ID_92E 0x07 -#define HAL_HW_TYPE_ID_8814A 0x08 -#define HAL_HW_TYPE_ID_8821B 0x09 -#define HAL_HW_TYPE_ID_8822B 0x0a -#define HAL_HW_TYPE_ID_8703B 0x0b -#define HAL_HW_TYPE_ID_8188F 0x0c -#define HAL_HW_TYPE_ID_8723D 0x0f - - -// Power on I/O space range. -#define IS_PCIE_POWER_ON_IO_REG(offset) (((offset < 0x100) || (offset >= 0x0300 && offset < 0x0400)) ? TRUE: FALSE) -#define IS_SDIO_POWER_ON_IO_REG(DeviceID, offset) ( \ - ((DeviceID == WLAN_IOREG_DEVICE_ID && (offset < 0x100)) ||\ - (DeviceID == SDIO_LOCAL_DEVICE_ID)) ? TRUE: FALSE) -#define IS_USB_POWER_ON_IO_REG(offset) ((offset < 0x0100 || offset >= 0xFE00) ? TRUE: FALSE) - -// -// (1) Define the data type of ISR/IMR on each IC. 2005.11.13, by rcnjko. -// (2) Define allowed AMSDU size according to Tx FIFO size indifferent hardware, -// (3) Define Retry Limit for different hardware -// 2007/11/12 by Emily -// - -#define HAL_GET_MAXIMUN_AMSDU_SIZE(_Size) _Size // Limited by TX FIFO Size -#define HAL_GET_DECLARED_AMSDU_SIZE(_Peer_Cap) (_Peer_Cap==0)?3839:7935; - -// Set diffrent retry limit in infrastructure mode and adhoc mode because if driver is set -// in adhoc mode, driver has to send probe response, and if the other STA is scaning and switch -// to another channel, driver will send to many useless probe response packet. Mangament -// frame has higher priority which may cause starvation of data packet. 2008/05/14 by Emily - -// The reason to set HAL_RETRY_LIMIT_INFRA to 0x30 -// (1) Lanhsin modified 02272008 for Linksys WRT350N. Under air, if we don't retry more -// times, these APs can't rx ok and the TP will be bad. -// (2) Cosa modified 02272008 for BelkinF5D(Ralink) AP, Netgear WNR854T. Under air, if -// we don't retry more times, these APs can't rx ok and the TP will be bad. -#define HAL_RETRY_LIMIT_INFRA 48 -#define HAL_RETRY_LIMIT_AP_ADHOC 14 - -typedef u4Byte RT_INT_REG, *PRT_INT_REG; - -// ------------------------------------------------------------------------------------------------ -// Define file name for Firmware image and PHY configuration -// ------------------------------------------------------------------------------------------------ - -//--------------------------------------------------------------------- -// RTL8192CU From file -//--------------------------------------------------------------------- - - //2TODO: The following need to check!! - #define RTL8192C_FW_TSMC_IMG "rtl8192CU\\rtl8192cfwT.bin" - #define RTL8192C_FW_UMC_IMG "rtl8192CU\\rtl8192cfwU.bin" - #define RTL8192C_FW_UMC_B_IMG "rtl8192CU\\rtl8192cfwU_B.bin" - #define RTL8192D_FW_IMG "rtl8192DU\\rtl8192dfw.bin" - #define RTL8192C_FW_TSMC_WW_IMG "rtl8192CU\\rtl8192cfwTww.bin" - #define RTL8192C_FW_UMC_WW_IMG "rtl8192CU\\rtl8192cfwUww.bin" - #define RTL8192C_FW_UMC_B_WW_IMG "rtl8192CU\\rtl8192cfwU_Bww.bin" - - #define RTL8188C_PHY_REG "rtl8192CU\\PHY_REG_1T.txt" - #define RTL8188C_PHY_RADIO_A "rtl8192CU\\radio_a_1T.txt" - #define RTL8188C_PHY_RADIO_B "rtl8192CU\\radio_b_1T.txt" - #define RTL8188C_AGC_TAB "rtl8192CU\\AGC_TAB_1T.txt" - #define RTL8188C_PHY_MACREG "rtl8192CU\\MAC_REG.txt" - #define RTL8188C_PHY_RADIO_A_mCard "rtl8192CU\\radio_a_1T_mCard.txt" - #define RTL8188C_PHY_RADIO_B_mCard "rtl8192CU\\radio_b_1T_mCard.txt" - #define RTL8188C_PHY_RADIO_A_HP "rtl8192CU\\radio_a_1T_HP.txt" - #define RTL8188C_PHY_REG_HP "rtl8192CU\\PHY_REG_1T_HP.txt" - #define RTL8188C_PHY_REG_mCard "rtl8192CU\\PHY_REG_1T_mCard.txt" - #define RTL8188C_AGC_TAB_HP "rtl8192CU\\AGC_TAB_1T_HP.txt" - - #define RTL8192C_PHY_REG "rtl8192CU\\PHY_REG_2T.txt" - #define RTL8192C_PHY_REG_mCard "rtl8192CU\\PHY_REG_2T_mCard.txt" - #define RTL8192C_PHY_RADIO_A "rtl8192CU\\radio_a_2T.txt" - #define RTL8192C_PHY_RADIO_B "rtl8192CU\\radio_b_2T.txt" - #define RTL8192C_AGC_TAB "rtl8192CU\\AGC_TAB_2T.txt" - #define RTL8192C_PHY_MACREG "rtl8192CU\\MAC_REG.txt" - - #define RTL819X_PHY_REG_PG "rtl8192CU\\PHY_REG_PG.txt" - #define RTL819X_PHY_REG_MP "rtl8192CU\\PHY_REG_MP.txt" - #define RTL819X_PHY_REG_PG_HP "rtl8192CU\\PHY_REG_PG_HP.txt" - #define RTL819X_PHY_RADIO_A "rtl8192CU\\radio_a.txt" - #define RTL819X_PHY_RADIO_B "rtl8192CU\\radio_b.txt" - -//--------------------------------------------------------------------- -// RTL8192DU From file -//--------------------------------------------------------------------- - - #define RTL8192D_PHY_REG "rtl8192DU\\PHY_REG.txt" - #define RTL8192D_PHY_REG_PG "rtl8192DU\\PHY_REG_PG.txt" - #define RTL8192D_PHY_REG_MP "rtl8192DU\\PHY_REG_MP.txt" - - #define RTL8192D_AGC_TAB "rtl8192DU\\AGC_TAB.txt" - #define RTL8192D_AGC_TAB_2G "rtl8192DU\\AGC_TAB_2G.txt" - #define RTL8192D_AGC_TAB_5G "rtl8192DU\\AGC_TAB_5G.txt" - #define RTL8192D_PHY_RADIO_A "rtl8192DU\\radio_a.txt" - #define RTL8192D_PHY_RADIO_B "rtl8192DU\\radio_b.txt" - #define RTL8192D_PHY_RADIO_A_intPA "rtl8192DU\\radio_a_intPA.txt" - #define RTL8192D_PHY_RADIO_B_intPA "rtl8192DU\\radio_b_intPA.txt" - #define RTL8192D_PHY_MACREG "rtl8192DU\\MAC_REG.txt" - -//--------------------------------------------------------------------- -// RTL8812AU From file -//--------------------------------------------------------------------- - #define RTL8812_FW_IMG "rtl8812AU\\rtl8812Ufw.bin" - #define RTL8812_FW_WW_IMG "rtl8812AU\\rtl8812Ufwww.bin" - #define RTL8812_FW_BT_IMG "rtl8812AU\\rtl8812UfwBT.bin" - #define RTL8812_PHY_REG "rtl8812AU\\PHY_REG.txt" - #define RTL8812_PHY_RADIO_A "rtl8812AU\\RadioA.txt" - #define RTL8812_PHY_RADIO_B "rtl8812AU\\RadioB.txt" - #define RTL8812_TXPWR_TRACK "rtl8812AU\\TxPowerTrack.txt" - #define RTL8812_AGC_TAB "rtl8812AU\\AGC_TAB.txt" - #define RTL8812_PHY_MACREG "rtl8812AU\\MAC_REG.txt" - #define RTL8812_PHY_REG_PG "rtl8812AU\\PHY_REG_PG.txt" - #define RTL8812_PHY_REG_MP "rtl8812AU\\PHY_REG_MP.txt" - #define RTL8812_TXPWR_LMT "rtl8812AU\\TXPWR_LMT.txt" - - -//--------------------------------------------------------------------- -// RTL8723S From file -//--------------------------------------------------------------------- - #define RTL8723_FW_UMC_IMG "rtl8723S\\rtl8723fw.bin" - #define RTL8723_FW_UMC_B_IMG "rtl8723S\\rtl8723fw_B.bin" - #define RTL8723_FW_UMC_WW_IMG "rtl8723S\\rtl8723fwww.bin" - #define RTL8723_FW_UMC_B_WW_IMG "rtl8723S\\rtl8723fw_Bww.bin" - #define RTL8723_PHY_REG "rtl8723S\\PHY_REG_1T.txt" - #define RTL8723_PHY_RADIO_A "rtl8723S\\radio_a_1T.txt" - #define RTL8723_PHY_RADIO_B "rtl8723S\\radio_b_1T.txt" - #define RTL8723_AGC_TAB "rtl8723S\\AGC_TAB_1T.txt" - #define RTL8723_PHY_MACREG "rtl8723S\\MAC_REG.txt" - #define RTL8723_PHY_MACREG "rtl8723S\\MAC_REG.txt" - #define RTL8723_PHY_REG_PG "rtl8723S\\PHY_REG_PG.txt" - #define RTL8723_PHY_REG_MP "rtl8723S\\PHY_REG_MP.txt" - -//--------------------------------------------------------------------- -// RTL8188ES From file -//--------------------------------------------------------------------- - #define RTL8188E_FW_T_IMG "rtl8188E\\rtl8188Efw.bin" - #define RTL8188E_FW_T_WW_IMG "rtl8188E\\rtl8188Efwww.bin" - #define RTL8188E_FW_S_IMG "rtl8188E\\rtl8188EfwS.bin" - #define RTL8188E_FW_S_WW_IMG "rtl8188E\\rtl8188EfwSww.bin" - #define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt" - #define RTL8188E_PHY_RADIO_A "rtl8188E\\RadioA_1T.txt" - #define RTL8188E_PHY_RADIO_B "rtl8188E\\RadioB_1T.txt" - #define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt" - #define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt" - #define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt" - #define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt" - #define RTL8188E_TXPWR_LMT "rtl8188E\\TXPWR_LMT.txt" - #define RTL8188E_TXPWR_TRACK "rtl8188E\\TxPowerTrack.txt" - -//--------------------------------------------------------------------- -// RTL8821S From file -//--------------------------------------------------------------------- - #define RTL8821_FW_IMG "rtl8821AS\\RTL8821sFW.bin" - #define RTL8821_FW_WW_IMG "rtl8821AS\\RTL8821sFWww.bin" - #define RTL8821_FW_BT_IMG "rtl8821AS\\rtl8821AfwBT.bin" - #define RTL8821_PHY_REG "rtl8821AS\\PHY_REG.txt" - #define RTL8821_PHY_RADIO_A "rtl8821AS\\RadioA.txt" - #define RTL8821_PHY_RADIO_B "rtl8821AS\\RadioB.txt" - #define RTL8821_TXPWR_TRACK "rtl8821AS\\TxPowerTrack.txt" - #define RTL8821_AGC_TAB "rtl8821AS\\AGC_TAB.txt" - #define RTL8821_PHY_MACREG "rtl8821AS\\MAC_REG.txt" - #define RTL8821_PHY_REG_PG "rtl8821AS\\PHY_REG_PG.txt" - #define RTL8821_PHY_REG_MP "rtl8821AS\\PHY_REG_MP.txt" - #define RTL8821_TXPWR_LMT "rtl8821AS\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8192E From file -//--------------------------------------------------------------------- - #define RTL8192E_FW_IMG "rtl8192ES\\rtl8192ESfw.bin" - #define RTL8192E_FW_WW_IMG "rtl8192ES\\rtl8192ESfwww.bin" - #define RTL8192E_FW_BT_IMG "rtl8192EE\\rtl8192ESfwBT.bin" - #define RTL8192E_PHY_REG "rtl8192ES\\PHY_REG.txt" - #define RTL8192E_PHY_RADIO_A "rtl8192ES\\RadioA.txt" - #define RTL8192E_PHY_RADIO_B "rtl8192ES\\RadioB.txt" - #define RTL8192E_AGC_TAB "rtl8192ES\\AGC_TAB.txt" - #define RTL8192E_PHY_MACREG "rtl8192ES\\MAC_REG.txt" - #define RTL8192E_PHY_REG_PG "rtl8192ES\\PHY_REG_PG.txt" - #define RTL8192E_PHY_REG_MP "rtl8192ES\\PHY_REG_MP.txt" - #define RTL8192_TXPWR_TRACK "rtl8192ES\\TxPowerTrack.txt" - #define RTL8192E_TXPWR_LMT "rtl8192ES\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8723D From file -//--------------------------------------------------------------------- - #define RTL8723D_FW_IMG "rtl8723DS\\rtl8723DSfw.bin" - #define RTL8723D_FW_WW_IMG "rtl8723DS\\rtl8723DSfwww.bin" - #define RTL8723D_FW_BT_IMG "rtl8723DS\\rtl8723DSfwBT.bin" - #define RTL8723D_PHY_REG "rtl8723DS\\PHY_REG.txt" - #define RTL8723D_PHY_RADIO_A "rtl8723DS\\RadioA.txt" - #define RTL8723D_AGC_TAB "rtl8723DS\\AGC_TAB.txt" - #define RTL8723D_PHY_MACREG "rtl8723DS\\MAC_REG.txt" - #define RTL8723D_PHY_REG_PG "rtl8723DS\\PHY_REG_PG.txt" - #define RTL8723D_PHY_REG_MP "rtl8723DS\\PHY_REG_MP.txt" - #define RTL8723D_TXPWR_TRACK "rtl8723DS\\TxPowerTrack.txt" - #define RTL8723D_TXPWR_LMT "rtl8723DS\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8814A From file -//--------------------------------------------------------------------- - #define RTL8814A_FW_IMG "rtl8814as\\rtl8814Afw.bin" - #define RTL8814A_PHY_REG "rtl8814as\\PHY_REG.txt" - #define RTL8814A_PHY_RADIO_A "rtl8814as\\RadioA.txt" - #define RTL8814A_PHY_RADIO_B "rtl8814as\\RadioB.txt" - #define RTL8814A_PHY_RADIO_C "rtl8814as\\RadioC.txt" - #define RTL8814A_PHY_RADIO_D "rtl8814as\\RadioD.txt" - #define RTL8814A_AGC_TAB "rtl8814as\\AGC_TAB.txt" - #define RTL8814A_PHY_MACREG "rtl8814as\\MAC_REG.txt" - #define RTL8814A_PHY_REG_PG "rtl8814as\\PHY_REG_PG.txt" - #define RTL8814A_PHY_REG_MP "rtl8814as\\PHY_REG_MP.txt" - #define RTL8814A_TXPWR_TRACK "rtl8814as\\TxPowerTrack.txt" - #define RTL8814A_TXPWR_LMT "rtl8814as\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8821BS From file -//--------------------------------------------------------------------- - #define RTL8821B_FW_IMG "rtl8821BS\\rtl8821Bfw.bin" - #define RTL8821B_PHY_REG "rtl8821BS\\PHY_REG.txt" - #define RTL8821B_PHY_RADIO_A "rtl8821BS\\RadioA.txt" - #define RTL8821B_TXPWR_TRACK "rtl8821BS\\TxPowerTrack.txt" - #define RTL8821B_AGC_TAB "rtl8821BS\\AGC_TAB.txt" - #define RTL8821B_PHY_MACREG "rtl8821BS\\MAC_REG.txt" - #define RTL8821B_PHY_REG_PG "rtl8821BS\\PHY_REG_PG.txt" - #define RTL8821B_PHY_REG_MP "rtl8821BS\\PHY_REG_MP.txt" - #define RTL8821B_TXPWR_LMT "rtl8821BS\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8822BS From file -//--------------------------------------------------------------------- - #define RTL8822B_FW_IMG "rtl8822BS\\rtl8822Bfw.bin" - #define RTL8822B_PHY_REG "rtl8822BS\\PHY_REG.txt" - #define RTL8822B_PHY_RADIO_A "rtl8822BS\\RadioA.txt" - #define RTL8822B_PHY_RADIO_B "rtl8822BS\\RadioB.txt" - #define RTL8822B_TXPWR_TRACK "rtl8822BS\\TxPowerTrack.txt" - #define RTL8822B_AGC_TAB "rtl8822BS\\AGC_TAB.txt" - #define RTL8822B_PHY_MACREG "rtl8822BS\\MAC_REG.txt" - #define RTL8822B_PHY_REG_PG "rtl8822BS\\PHY_REG_PG.txt" - #define RTL8822B_PHY_REG_MP "rtl8822BS\\PHY_REG_MP.txt" - #define RTL8822B_TXPWR_LMT "rtl8822BS\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8723BS From file -//--------------------------------------------------------------------- - #define RTL8723B_FW_IMG "rtl8723BS\\rtl8723Bfw.bin" - #define RTL8723B_FW_WW_IMG "rtl8723BS\\rtl8723Bfwww.bin" - #define RTL8723B_FW_BT_IMG "rtl8723BS\\rtl8723BfwBT.bin" - #define RTL8723B_PHY_REG "rtl8723BS\\PHY_REG.txt" - #define RTL8723B_PHY_RADIO_A "rtl8723BS\\RadioA.txt" - #define RTL8723B_PHY_RADIO_B "rtl8723BS\\RadioB.txt" - #define RTL8723B_TXPWR_TRACK "rtl8723BS\\TxPowerTrack.txt" - #define RTL8723B_AGC_TAB "rtl8723BS\\AGC_TAB.txt" - #define RTL8723B_PHY_MACREG "rtl8723BS\\MAC_REG.txt" - #define RTL8723B_PHY_REG_PG "rtl8723BS\\PHY_REG_PG.txt" - #define RTL8723B_PHY_REG_MP "rtl8723BS\\PHY_REG_MP.txt" - #define RTL8723B_TXPWR_LMT "rtl8723BS\\TXPWR_LMT.txt" - -//--------------------------------------------------------------------- -// RTL8703BS From file -//--------------------------------------------------------------------- - #define RTL8703B_FW_IMG "rtl8703BS\\rtl8703Bfw.bin" - #define RTL8703B_FW_WW_IMG "rtl8703BS\\rtl8703Bfwww.bin" - #define RTL8703B_FW_BT_IMG "rtl8703BS\\rtl8703BfwBT.bin" - #define RTL8703B_PHY_REG "rtl8703BS\\PHY_REG.txt" - #define RTL8703B_PHY_RADIO_A "rtl8703BS\\RadioA.txt" - #define RTL8703B_PHY_RADIO_B "rtl8703BS\\RadioB.txt" - #define RTL8703B_TXPWR_TRACK "rtl8703BS\\TxPowerTrack.txt" - #define RTL8703B_AGC_TAB "rtl8703BS\\AGC_TAB.txt" - #define RTL8703B_PHY_MACREG "rtl8703BS\\MAC_REG.txt" - #define RTL8703B_PHY_REG_PG "rtl8703BS\\PHY_REG_PG.txt" - #define RTL8703B_PHY_REG_MP "rtl8703BS\\PHY_REG_MP.txt" - #define RTL8703B_TXPWR_LMT "rtl8703BS\\TXPWR_LMT.txt" -//--------------------------------------------------------------------- -// RTL8188FS From file -//--------------------------------------------------------------------- - #define RTL8188F_FW_IMG "rtl8188FS\\rtl8188Ffw.bin" - #define RTL8188F_FW_WW_IMG "rtl8188FS\\rtl8188Ffwww.bin" - #define RTL8188F_FW_BT_IMG "rtl8188FS\\rtl8188FfwBT.bin" - #define RTL8188F_PHY_REG "rtl8188FS\\PHY_REG.txt" - #define RTL8188F_PHY_RADIO_A "rtl8188FS\\RadioA.txt" - #define RTL8188F_PHY_RADIO_B "rtl8188FS\\RadioB.txt" - #define RTL8188F_TXPWR_TRACK "rtl8188FS\\TxPowerTrack.txt" - #define RTL8188F_AGC_TAB "rtl8188FS\\AGC_TAB.txt" - #define RTL8188F_PHY_MACREG "rtl8188FS\\MAC_REG.txt" - #define RTL8188F_PHY_REG_PG "rtl8188FS\\PHY_REG_PG.txt" - #define RTL8188F_PHY_REG_MP "rtl8188FS\\PHY_REG_MP.txt" - #define RTL8188F_TXPWR_LMT "rtl8188FS\\TXPWR_LMT.txt" -//--------------------------------------------------------------------- -// RTL8723S From header -//--------------------------------------------------------------------- - // Fw Array - #define Rtl8723_FwImageArray Rtl8723SFwImgArray - #define Rtl8723_FwUMCBCutImageArray Rtl8723SFwUMCBCutImgArray - #define Rtl8723_FwWWImageArray Rtl8723FwWWImgArray - #define Rtl8723_FwUMCBWWCutImageArray Rtl8723FwUMCBCutWWImgArray - - // MAC/BB/PHY Array - #define Rtl8723_MAC_Array Rtl8723SMAC_2T_Array - #define Rtl8723_AGCTAB_2TArray Rtl8723SAGCTAB_2TArray - #define Rtl8723_AGCTAB_1TArray Rtl8723SAGCTAB_1TArray - #define Rtl8723_PHY_REG_2TArray Rtl8723SPHY_REG_2TArray - #define Rtl8723_PHY_REG_1TArray Rtl8723SPHY_REG_1TArray - #define Rtl8723_RadioA_2TArray Rtl8723SRadioA_2TArray - #define Rtl8723_RadioA_1TArray Rtl8723SRadioA_1TArray - #define Rtl8723_RadioB_2TArray Rtl8723SRadioB_2TArray - #define Rtl8723_RadioB_1TArray Rtl8723SRadioB_1TArray - #define Rtl8723_PHY_REG_Array_PG Rtl8723SPHY_REG_Array_PG - #define Rtl8723_PHY_REG_Array_MP Rtl8723SPHY_REG_Array_MP - - // Array length - #define Rtl8723_ImgArrayLength Rtl8723SImgArrayLength - #define Rtl8723_UMCBCutImgArrayLength Rtl8723SUMCBCutImgArrayLength - #define Rtl8723_WWImgArrayLength Rtl8723WWImgArrayLength - #define Rtl8723_UMCBCutWWImgArrayLength Rtl8723UMCBCutWWImgArrayLength - #define Rtl8723_MAC_ArrayLength Rtl8723SMAC_2T_ArrayLength - #define Rtl8723_AGCTAB_1TArrayLength Rtl8723SAGCTAB_1TArrayLength - #define Rtl8723_PHY_REG_1TArrayLength Rtl8723SPHY_REG_1TArrayLength - #define Rtl8723_PHY_REG_Array_MPLength Rtl8723SPHY_REG_Array_MPLength - #define Rtl8723_PHY_REG_Array_PGLength Rtl8723SPHY_REG_Array_PGLength - #define Rtl8723_RadioA_1TArrayLength Rtl8723SRadioA_1TArrayLength - #define Rtl8723_RadioB_1TArrayLength Rtl8723SRadioB_1TArrayLength - - //--------------------------------------------------------------------- - // RTL8192ES From header - //--------------------------------------------------------------------- - // Fw Array - #define Rtl8192E_FwImageArray Rtl8192ESFwImgArray - #define Rtl8192E_FwWWImageArray Rtl8192EFwWWImgArray - - // MAC/BB/PHY Array - #define Rtl8192E_MAC_Array Rtl8192ESMAC_1T_Array - #define Rtl8192E_PHY_REG_1TArray Rtl8192ESPHY_REG_1TArray - #define Rtl8192E_AGCTAB_1TArray Rtl8192ESAGCTAB_1TArray - #define Rtl8192E_RadioA_1TArray Rtl8192ESRadioA_1TArray - #define Rtl8192E_PHY_REG_Array_PG Rtl8192ESPHY_REG_Array_PG - #define Rtl8192E_PHY_REG_Array_MP Rtl8192ESPHY_REG_Array_MP - - // Array length - #define Rtl8192E_ImgArrayLength Rtl8192ESImgArrayLength - #define Rtl8192E_MAC_ArrayLength Rtl8192ESMAC_1T_ArrayLength - #define Rtl8192E_WWImgArrayLength Rtl8192EWWImgArrayLength - #define Rtl8192E_PHY_REG_1TArrayLength Rtl8192ESPHY_REG_1TArrayLength - #define Rtl8192E_AGCTAB_1TArrayLength Rtl8192ESAGCTAB_1TArrayLength - #define Rtl8192E_RadioA_1TArrayLength Rtl8192ESRadioA_1TArrayLength - #define Rtl8192E_PHY_REG_Array_PGLength Rtl8192ESPHY_REG_Array_PGLength - #define Rtl8192E_PHY_REG_Array_MPLength Rtl8192ESPHY_REG_Array_MPLength - - - - - -// --------------------------------------------------------------------- -// RTL8723 Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8723_NIC_PWR_ON_FLOW rtl8723A_power_on_flow -#define Rtl8723_NIC_RF_OFF_FLOW rtl8723A_radio_off_flow -#define Rtl8723_NIC_DISABLE_FLOW rtl8723A_card_disable_flow -#define Rtl8723_NIC_ENABLE_FLOW rtl8723A_card_enable_flow -#define Rtl8723_NIC_SUSPEND_FLOW rtl8723A_suspend_flow -#define Rtl8723_NIC_RESUME_FLOW rtl8723A_resume_flow -#define Rtl8723_NIC_PDN_FLOW rtl8723A_hwpdn_flow -#define Rtl8723_NIC_LPS_ENTER_FLOW rtl8723A_enter_lps_flow -#define Rtl8723_NIC_LPS_LEAVE_FLOW rtl8723A_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8188E Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow -#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow -#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow -#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow -#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow -#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow -#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow -#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow -#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8812 Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8812_NIC_PWR_ON_FLOW rtl8812_power_on_flow -#define Rtl8812_NIC_RF_OFF_FLOW rtl8812_radio_off_flow -#define Rtl8812_NIC_DISABLE_FLOW rtl8812_card_disable_flow -#define Rtl8812_NIC_ENABLE_FLOW rtl8812_card_enable_flow -#define Rtl8812_NIC_SUSPEND_FLOW rtl8812_suspend_flow -#define Rtl8812_NIC_RESUME_FLOW rtl8812_resume_flow -#define Rtl8812_NIC_PDN_FLOW rtl8812_hwpdn_flow -#define Rtl8812_NIC_LPS_ENTER_FLOW rtl8812_enter_lps_flow -#define Rtl8812_NIC_LPS_LEAVE_FLOW rtl8812_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8821 Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8821A_NIC_PWR_ON_FLOW rtl8821A_power_on_flow -#define Rtl8821A_NIC_RF_OFF_FLOW rtl8821A_radio_off_flow -#define Rtl8821A_NIC_DISABLE_FLOW rtl8821A_card_disable_flow -#define Rtl8821A_NIC_ENABLE_FLOW rtl8821A_card_enable_flow -#define Rtl8821A_NIC_SUSPEND_FLOW rtl8821A_suspend_flow -#define Rtl8821A_NIC_RESUME_FLOW rtl8821A_resume_flow -#define Rtl8821A_NIC_PDN_FLOW rtl8821A_hwpdn_flow -#define Rtl8821A_NIC_LPS_ENTER_FLOW rtl8821A_enter_lps_flow -#define Rtl8821A_NIC_LPS_LEAVE_FLOW rtl8821A_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8821B Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8821B_NIC_PWR_ON_FLOW rtl8821B_power_on_flow -#define Rtl8821B_NIC_RF_OFF_FLOW rtl8821B_radio_off_flow -#define Rtl8821B_NIC_DISABLE_FLOW rtl8821B_card_disable_flow -#define Rtl8821B_NIC_ENABLE_FLOW rtl8821B_card_enable_flow -#define Rtl8821B_NIC_SUSPEND_FLOW rtl8821B_suspend_flow -#define Rtl8821B_NIC_RESUME_FLOW rtl8821B_resume_flow -#define Rtl8821B_NIC_PDN_FLOW rtl8821B_hwpdn_flow -#define Rtl8821B_NIC_LPS_ENTER_FLOW rtl8821B_enter_lps_flow -#define Rtl8821B_NIC_LPS_LEAVE_FLOW rtl8821B_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8822B Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8822B_NIC_PWR_ON_FLOW rtl8822B_power_on_flow -#define Rtl8822B_NIC_RF_OFF_FLOW rtl8822B_radio_off_flow -#define Rtl8822B_NIC_DISABLE_FLOW rtl8822B_card_disable_flow -#define Rtl8822B_NIC_ENABLE_FLOW rtl8822B_card_enable_flow -#define Rtl8822B_NIC_SUSPEND_FLOW rtl8822B_suspend_flow -#define Rtl8822B_NIC_RESUME_FLOW rtl8822B_resume_flow -#define Rtl8822B_NIC_PDN_FLOW rtl8822B_hwpdn_flow -#define Rtl8822B_NIC_LPS_ENTER_FLOW rtl8822B_enter_lps_flow -#define Rtl8822B_NIC_LPS_LEAVE_FLOW rtl8822B_leave_lps_flow - - -//--------------------------------------------------------------------- -// RTL8192E Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8192E_NIC_PWR_ON_FLOW rtl8192E_power_on_flow -#define Rtl8192E_NIC_RF_OFF_FLOW rtl8192E_radio_off_flow -#define Rtl8192E_NIC_DISABLE_FLOW rtl8192E_card_disable_flow -#define Rtl8192E_NIC_ENABLE_FLOW rtl8192E_card_enable_flow -#define Rtl8192E_NIC_SUSPEND_FLOW rtl8192E_suspend_flow -#define Rtl8192E_NIC_RESUME_FLOW rtl8192E_resume_flow -#define Rtl8192E_NIC_PDN_FLOW rtl8192E_hwpdn_flow -#define Rtl8192E_NIC_LPS_ENTER_FLOW rtl8192E_enter_lps_flow -#define Rtl8192E_NIC_LPS_LEAVE_FLOW rtl8192E_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8814A Power Configuration CMDs for PCIe interface -//--------------------------------------------------------------------- -#define Rtl8814A_NIC_PWR_ON_FLOW rtl8814A_power_on_flow -#define Rtl8814A_NIC_RF_OFF_FLOW rtl8814A_radio_off_flow -#define Rtl8814A_NIC_DISABLE_FLOW rtl8814A_card_disable_flow -#define Rtl8814A_NIC_ENABLE_FLOW rtl8814A_card_enable_flow -#define Rtl8814A_NIC_SUSPEND_FLOW rtl8814A_suspend_flow -#define Rtl8814A_NIC_RESUME_FLOW rtl8814A_resume_flow -#define Rtl8814A_NIC_PDN_FLOW rtl8814A_hwpdn_flow -#define Rtl8814A_NIC_LPS_ENTER_FLOW rtl8814A_enter_lps_flow -#define Rtl8814A_NIC_LPS_LEAVE_FLOW rtl8814A_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8723B Power Configuration CMDs -//--------------------------------------------------------------------- -#define Rtl8723B_NIC_PWR_ON_FLOW rtl8723B_power_on_flow -#define Rtl8723B_NIC_RF_OFF_FLOW rtl8723B_radio_off_flow -#define Rtl8723B_NIC_DISABLE_FLOW rtl8723B_card_disable_flow -#define Rtl8723B_NIC_ENABLE_FLOW rtl8723B_card_enable_flow -#define Rtl8723B_NIC_SUSPEND_FLOW rtl8723B_suspend_flow -#define Rtl8723B_NIC_RESUME_FLOW rtl8723B_resume_flow -#define Rtl8723B_NIC_PDN_FLOW rtl8723B_hwpdn_flow -#define Rtl8723B_NIC_LPS_ENTER_FLOW rtl8723B_enter_lps_flow -#define Rtl8723B_NIC_LPS_LEAVE_FLOW rtl8723B_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8703B Power Configuration CMDs -//--------------------------------------------------------------------- -#define Rtl8703B_NIC_PWR_ON_FLOW rtl8703B_power_on_flow -#define Rtl8703B_NIC_RF_OFF_FLOW rtl8703B_radio_off_flow -#define Rtl8703B_NIC_DISABLE_FLOW rtl8703B_card_disable_flow -#define Rtl8703B_NIC_ENABLE_FLOW rtl8703B_card_enable_flow -#define Rtl8703B_NIC_SUSPEND_FLOW rtl8703B_suspend_flow -#define Rtl8703B_NIC_RESUME_FLOW rtl8703B_resume_flow -#define Rtl8703B_NIC_PDN_FLOW rtl8703B_hwpdn_flow -#define Rtl8703B_NIC_LPS_ENTER_FLOW rtl8703B_enter_lps_flow -#define Rtl8703B_NIC_LPS_LEAVE_FLOW rtl8703B_leave_lps_flow -//--------------------------------------------------------------------- -// RTL8188F Power Configuration CMDs -//--------------------------------------------------------------------- -#define Rtl8188F_NIC_PWR_ON_FLOW rtl8188F_power_on_flow -#define Rtl8188F_NIC_RF_OFF_FLOW rtl8188F_radio_off_flow -#define Rtl8188F_NIC_DISABLE_FLOW rtl8188F_card_disable_flow -#define Rtl8188F_NIC_ENABLE_FLOW rtl8188F_card_enable_flow -#define Rtl8188F_NIC_SUSPEND_FLOW rtl8188F_suspend_flow -#define Rtl8188F_NIC_RESUME_FLOW rtl8188F_resume_flow -#define Rtl8188F_NIC_PDN_FLOW rtl8188F_hwpdn_flow -#define Rtl8188F_NIC_LPS_ENTER_FLOW rtl8188F_enter_lps_flow -#define Rtl8188F_NIC_LPS_LEAVE_FLOW rtl8188F_leave_lps_flow - -//--------------------------------------------------------------------- -// RTL8723D Power Configuration CMDs -//--------------------------------------------------------------------- -#define Rtl8723D_NIC_PWR_ON_FLOW rtl8723D_power_on_flow -#define Rtl8723D_NIC_RF_OFF_FLOW rtl8723D_radio_off_flow -#define Rtl8723D_NIC_DISABLE_FLOW rtl8723D_card_disable_flow -#define Rtl8723D_NIC_ENABLE_FLOW rtl8723D_card_enable_flow -#define Rtl8723D_NIC_SUSPEND_FLOW rtl8723D_suspend_flow -#define Rtl8723D_NIC_RESUME_FLOW rtl8723D_resume_flow -#define Rtl8723D_NIC_PDN_FLOW rtl8723D_hwpdn_flow -#define Rtl8723D_NIC_LPS_ENTER_FLOW rtl8723D_enter_lps_flow -#define Rtl8723D_NIC_LPS_LEAVE_FLOW rtl8723D_leave_lps_flow - - -typedef enum _FA_CNT_TYPE{ - FA_CNT_OFDM_CCA, - FA_CNT_CCK_CCA, - FA_CNT_OFDM_FAIL, - FA_CNT_CCK_FAIL, - FA_CNT_TYPE_MAX -}FA_CNT_TYPE; - -// -// Forward declaration. -// -typedef struct _ADAPTER ADAPTER, *PADAPTER; -typedef struct _RT_RFD RT_RFD, *PRT_RFD; -typedef struct _RT_TCB RT_TCB, *PRT_TCB; -typedef struct _RT_TCB_STATUS RT_TCB_STATUS, *PRT_TCB_STATUS; -typedef struct _RT_RFD_STATUS RT_RFD_STATUS, *PRT_RFD_STATUS; -typedef struct _USB_IN_CONTEXT USB_IN_CONTEXT, *PUSB_IN_CONTEXT; -typedef struct _USB_OUT_CONTEXT USB_OUT_CONTEXT, *PUSB_OUT_CONTEXT; -typedef struct _SDIO_IN_CONTEXT SDIO_IN_CONTEXT, *PSDIO_IN_CONTEXT; -typedef struct _SDIO_OUT_CONTEXT SDIO_OUT_CONTEXT, *PSDIO_OUT_CONTEXT; -typedef struct _RT_WLAN_STA RT_WLAN_STA, *PRT_WLAN_STA; -typedef struct DM_Out_Source_Dynamic_Mechanism_Structure DM_ODM_T, *PDM_ODM_T; - -typedef enum _HARDWARE_TYPE{ - HARDWARE_TYPE_RTL8192E, - HARDWARE_TYPE_RTL819xU, - HARDWARE_TYPE_RTL8192SE, - HARDWARE_TYPE_RTL8192SU, - HARDWARE_TYPE_RTL8192CE, - HARDWARE_TYPE_RTL8192CU, - HARDWARE_TYPE_RTL8192DE, - HARDWARE_TYPE_RTL8192DU, - HARDWARE_TYPE_RTL8723AE, - HARDWARE_TYPE_RTL8723AU, - HARDWARE_TYPE_RTL8723AS, - HARDWARE_TYPE_RTL8723BE, - HARDWARE_TYPE_RTL8723BU, - HARDWARE_TYPE_RTL8723BS, - HARDWARE_TYPE_RTL8188EE, - HARDWARE_TYPE_RTL8188EU, - HARDWARE_TYPE_RTL8188ES, - HARDWARE_TYPE_RTL8192EE, - HARDWARE_TYPE_RTL8192EU, - HARDWARE_TYPE_RTL8192ES, - HARDWARE_TYPE_RTL8814AE, - HARDWARE_TYPE_RTL8814AU, - HARDWARE_TYPE_RTL8814AS, - HARDWARE_TYPE_RTL8812E, - HARDWARE_TYPE_RTL8812AU, - HARDWARE_TYPE_RTL8811AU, - HARDWARE_TYPE_RTL8821E, - HARDWARE_TYPE_RTL8821U, - HARDWARE_TYPE_RTL8821S, - HARDWARE_TYPE_RTL8821BE, - HARDWARE_TYPE_RTL8821BU, - HARDWARE_TYPE_RTL8821BS, - HARDWARE_TYPE_RTL8822BE, - HARDWARE_TYPE_RTL8822BU, - HARDWARE_TYPE_RTL8822BS, - HARDWARE_TYPE_RTL8703BE, - HARDWARE_TYPE_RTL8703BU, - HARDWARE_TYPE_RTL8703BS, - HARDWARE_TYPE_RTL8188FE, - HARDWARE_TYPE_RTL8188FU, - HARDWARE_TYPE_RTL8188FS, - HARDWARE_TYPE_RTL8723DE, - HARDWARE_TYPE_RTL8723DU, - HARDWARE_TYPE_RTL8723DS, - - HARDWARE_TYPE_MAX, -}HARDWARE_TYPE; - -typedef enum _RT_BUS_TYPE{ - BUS_TYPE_CARDBUS, - BUS_TYPE_MINIPCI, - BUS_TYPE_PCI, -}RT_BUS_TYPE,*PRT_BUS_TYPE; - -typedef enum _RT_EEPROM_TYPE{ - EEPROM_93C46, - EEPROM_93C56, - EEPROM_BOOT_EFUSE, -}RT_EEPROM_TYPE,*PRT_EEPROM_TYPE; - -typedef enum _LED_CTL_MODE{ - LED_CTL_POWER_ON = 1, - LED_CTL_LINK = 2, - LED_CTL_NO_LINK = 3, - LED_CTL_TX = 4, - LED_CTL_RX = 5, - LED_CTL_SITE_SURVEY = 6, - LED_CTL_POWER_OFF = 7, - LED_CTL_START_TO_LINK = 8, - LED_CTL_START_WPS = 9, - LED_CTL_STOP_WPS = 10, - LED_CTL_START_WPS_BOTTON = 11, //added for runtop - LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA - LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN - LED_CTL_CONNECTION_NO_TRANSFER = 14, - LED_CTL_OFF_BY_BUTTON = 15, //added for ALPHA -}LED_CTL_MODE; - - - -typedef enum _HW_VARIABLES{ - HW_VAR_ETHER_ADDR, - HW_VAR_MULTICAST_REG, - HW_VAR_BASIC_RATE, - HW_VAR_BSSID, // HW Port 0 BSSID - HW_VAR_BSSID1, // HW Port 1 BSSID - HW_VAR_MEDIA_STATUS, - HW_VAR_BEACON_INTERVAL, - HW_VAR_ATIM_WINDOW, - HW_VAR_SIFS, - HW_VAR_SLOT_TIME, - HW_VAR_ACK_PREAMBLE, - HW_VAR_COMMAND, // For Command Register, Annie, 2006-04-07. - HW_VAR_WPA_CONFIG, //2004/08/23, kcwu, for 8187 Security config - HW_VAR_AMPDU_MIN_SPACE, // The spacing between sub-frame. Roger, 2008.07.04. - HW_VAR_AMPDU_FACTOR, - HW_VAR_AC_PARAM, // For AC Parameters, 2005.12.01, by rcnjko. - HW_VAR_ACM_CTRL, // For ACM Control, Annie, 2005-12-13. - HW_VAR_CCX_CHNL_LOAD, // For CCX 2 channel load request, 2006.05.04. - HW_VAR_CCX_NOISE_HISTOGRAM, // For CCX 2 noise histogram request, 2006.05.04. - HW_VAR_CCX_CLM_NHM, // For CCX 2 parallel channel load request and noise histogram request, 2006.05.12. - HW_VAR_TURBO_MODE, // For turbo mode related settings, added by Roger, 2006.12.15. - HW_VAR_RF_STATE, // For change or query RF power state, 061214, rcnjko. - HW_VAR_RF_OFF_BY_HW, // For UI to query if external HW signal disable RF, 061229, rcnjko. - //1!!!!!!!!!!!!!!!!!!!!!!!!!!! - //1Attention Please!!!<11n or 8190 specific code should be put below this line> - //1!!!!!!!!!!!!!!!!!!!!!!!!!!! - HW_VAR_RCR, //for RCR, David 2006,05,11 - HW_VAR_RRSR, - HW_VAR_CHECK_BSSID, - HW_VAR_RETRY_LIMIT, - HW_VAR_INIT_TX_RATE, //Get Current Tx rate register. 2008.12.10. Added by tynli - HW_VAR_RF_2R_DISABLE, - HW_VAR_SET_RPWM, - HW_VAR_FILL_A2ENTRY, - HW_VAR_PS_PARTIAL_OFF, - HW_VAR_PS_WOWLAN_ENABLE_PATIAL_OFF, - HW_VAR_H2C_FW_PWRMODE, //by tynli. For setting FW related H2C cmd structure. 2009.2.18 - HW_VAR_H2C_FW_JOINBSSRPT, //by tynli. For setting FW related H2C cmd structure. 2009.2.18 - HW_VAR_H2C_FW_MEDIASTATUSRPT, - HW_VAR_STOP_SEND_BEACON, - HW_VAR_TSF_TIMER, // Read from TSF register to get the current TSF timer, by Bruce, 2009-07-22. - HW_VAR_TSF_TIMER1, // Port 1 TSF Timer Register - HW_VAR_TSFTR_SNC_OFFSET, // Control the offset between TSF and TSF1 Register when doing synchronization (signed offset) - HW_VAR_IO_CMD, - HW_VAR_H2C_FW_UPDATE_GTK, // For FW update GTK during S3/S4 for WoWLAN. 2009.06.10. by tynli. - HW_VAR_WF_MASK, //For WoWLAN wake up frame bit mask. 2009.06.18. by tynli. - HW_VAR_WF_CRC, //For WoWLAN wake up frame CRC value. 2009.06.18. by tynli. - HW_VAR_WF_IS_MAC_ADDR, //For WoWLAN wake up frame content which is the same as our MAC addr. 2009.06.18. by tynli. - HW_VAR_H2C_FW_OFFLOAD, //For WoWLAN. Offload to Fw by H2C cmd. 2009.07.31. by tynli. - HW_VAR_RESET_WFCRC, //For WoWLAN. 2009.08.05. by tynli. - HW_VAR_HANDLE_FW_C2H, //Added by tynli. For handling FW C2H command. 2009.10.07. - HW_VAR_AID, //Added by tynli. - HW_VAR_CORRECT_TSF, //Added by tynli. 2009.10.22. For Hw count TBTT time. - HW_VAR_FWLPS_RF_ON, //Added by tynli. 2009.11.09. For checking if Fw finishs RF on sequence. - HW_VAR_DUAL_TSF_RST, //Added by tynli. 2009.12.03. Suggested by TimChen. - HW_VAR_TSFR_SYNC_EN, // Synchronize HW-Port 0 TSF to HW-Port 1 TSF - HW_VAR_DUAL_SWITCH_BAND, - HW_VAR_INT_MIGRATION, //Added by Roger, 2010.03.05. - HW_VAR_RX_AGGR_USBTH, - HW_VAR_RX_AGGR_USBTO, - HW_VAR_RX_AGGR_PGTH, - HW_VAR_RX_AGGR_PGTO, - HW_VAR_FW_PSMODE_STATUS, //Added by tynli. 2010.04.19. - HW_VAR_P2P_PS_MODE, // Inform the P2P power save to the HW/FW. - HW_VAR_P2P_CLIENT_PS_STATE, // Update the P2P client ps state to FW. - HW_VAR_SETUP_PS_TIMER, // Set PsTimer - HW_VAR_PS_TIMEOUT, // PsTimer Interrupt. - HW_VAR_BW40MHZ_EXTCHNL, - HW_VAR_FPGA_SUSPEND_STATUS, // For RTL8723 FPGA Host suspend/resume verification, added by Roger, 2010.09.27. - HW_VAR_MSDU_LIFE_TIME, // MSDU Life Time to drop the packets out of life. - HW_VAR_INIT_RTS_RATE, //Added by tynli. 2010.11.16. - // 2011/01/11 MH Add for 819xp compatiable. - HW_VAR_RF_TIMING, // Temporary for RF timing. This shall be removed after RF team verified OK. - HW_VAR_APFM_ON_MAC, //Auto FSM to Turn On, include clock, isolation, power control for MAC only - HW_VAR_H2C_WLAN_INFO, //by tynli. For setting FW related H2C cmd structure. 2011.2.10 - HW_VAR_VID, - HW_VAR_PID, - HW_VAR_AGGR_TIMEOUT, // For AMPDU per station on vwifi, 2009.11.18 by hpfan - HW_VAR_AGGR_LIMIT, // For AMPDU per station on vwifi, 2009.11.18 by hpfan - HW_VAR_INIT_TX_RATE_MACID, // Add by hpfan. 2010.01.05 Get current tx rate for specified macid. - HW_VAR_DIS_SW_BCN, // Added by tynli. disable Sw DMA BCN - HW_VAR_MACPHY_MODE, - // The valid upper nav range for the HW updating, if the true value is larger than the upper range, the HW won't update it. - // Unit in microsecond. 0 means disable this function. - HW_VAR_NAV_UPPER, - HW_VAR_RF_STATUS_INT, // HW RF On/Off interrupt status - HW_VAR_FW_PS_STATE, // For Fw LPS 32k. by tynli. 2011.02.25. - HW_VAR_RESUME_CLK_ON, // For Fw LPS 32k. by tynli. - HW_VAR_FW_LPS_ENTER, - HW_VAR_FW_LPS_LEAVE, - HW_VAR_PRE_RPWM, - HW_VAR_FW_CLK_CHANGE_STATE, // For Fw LPS 32k. by tynli. - HW_VAR_FW_IPS_LEAVE, // For Fw inactive PS. by tynli. - HW_VAR_CHECK_NIC_UNPLUG, // Read the ISR register and check if the NIC is unplugged. - HW_VAR_HW_REG_TIMER_INIT, - HW_VAR_HW_REG_TIMER_RESTART, - HW_VAR_HW_REG_TIMER_START, - HW_VAR_HW_REG_TIMER_STOP, - HW_VAR_TCP_CHECKSUM_OFFLOAD, // For TCP checksunm En/Disable , Wirte only ( Read used HW_VAR_RCR); - HW_VAR_TX_RPT_MAX_MACID, - HW_VAR_TX_PAUSE, // For pause Tx - HW_VAR_BW80MHZ_EXTCHNL, - HW_VAR_PNP_FROM_NDIS_USB_SS, // Check whether this PnP event was from NDIS USB Selective Suspend, 2012.05.16. Added By Roger, 2012.05.11 - HW_VAR_SUPPORT_USB3, - HW_VAR_USB_MODE, - HW_VAR_AMPDU_MAX_TIME, - HW_VAR_AMPDU_MAX_AGG_NUM_DYNAMIC, - HW_VAR_BATCH_INDICATE_ENABLE, - HW_VAR_JAGUAR_PATCH, - HW_VAR_ANTENNA_DETECTED_INFO, // Support for antenna detection info from each IC, added by Roger, 2012.11.27. - HW_VAR_NQOS_SEQ_NUM, // Hw sequence number for non-Qos data and mgnt frame - HW_VAR_R2T_SIFS, // R2T SIFS - HW_VAR_BT_FUNC_DISABLE, // Disable BT function, added by Roger, 2013.03.19. - HW_VAR_ANT_SWITCH, - HW_VAR_BOOST_INIT_GAIN, - HW_VAR_FW_H2C_FCS_LOC, // For FW support fast channel switch download rsvd page - HW_VAR_FW_H2C_FCS_INFO_SET, // For FW support fast channel switch set channel information - HW_VAR_FW_H2C_FCS_INFO_STOP, // For FW support fast channel switch stop switch - HW_VAR_TIMER0, - HW_VAR_MACID_PKT_SLEEP, - HW_VAR_BOOST_INIT_GAIN_OS, - HW_VAR_CUR_CENTER_CHNL, // Current HW center channel - HW_VAR_MAX_Q_PAGE_NUM, - HW_VAR_AVBL_Q_PAGE_NUM, - HW_VAR_DBI, - HW_VAR_DBI_4, - HW_VAR_MDIO, -#if (AUTO_CHNL_SEL_NHM == 1) - HW_VAR_AUTO_CHNL_SEL, // Auto Channel Selection, added by Roger, 2014.05.15. -#endif - //--------------- START ------------------ - /* AMSDU related, haiso_ho, 2014.07.09 */ - //---------------------------------------- - HW_VAR_AMSDU_SUPPORT_PARTIALCOLAESCE, - HW_VAR_AMSDU_NO_PADDING, - HW_VAR_AMSDU_NEED_PREAGG_CHK, - HW_VAR_AMSDU_GET_SEG_NUM, - HW_VAR_AMSDU_GET_TXDESC_EXT_BUFFER_NUM, - HW_VAR_AMSDU_TEST_SETTING, - //---------------- END ------------------- - /* AMSDU related, haiso_ho, 2014.07.09 */ - //---------------------------------------- - - //--------------- START ------------------ - /* R/W ptr related, hsiao_ho, 2014.07.10 */ - //---------------------------------------- - HW_VAR_RWPTR_SET_TXBUFF_DESC_OWN, - HW_VAR_RWPTR_SET_RXQ_TXBD_IDX, - HW_VAR_RWPTR_GET_RXQ_TXBD_IDX, - HW_VAR_RWPTR_GET_RX_DESC_NUM, - HW_VAR_RWPTR_RX_INTERRUPT, - //---------------- END ------------------- - /* R/W ptr related, hsiao_ho, 2014.07.10 */ - //---------------------------------------- - - //--------------- START ------------------ - /* WMM related, hsiao_ho, 2014.07.10 */ - //---------------------------------------- - HW_VAR_WMM_NEED_FIX_PARAM, - //---------------- END ------------------- - /* WMM ptr related, hsiao_ho, 2014.07.10 */ - //---------------------------------------- - - //--------------- START ------------------ - /* Early mode related, hsiao_ho, 2014.07.10 */ - //---------------------------------------- - HW_VAR_EARLY_MODE_SUPPORT, - HW_VAR_EARLY_MODE_THRESHOLD, - //---------------- END ------------------- - /* Early mode related, hsiao_ho, 2014.07.10 */ - //---------------------------------------- - - //--------------- START ------------------ - /* MISC, hsiao_ho, 2014.07.11 */ - //---------------------------------------- - HW_VAR_CHK_JOINACTION, - //---------------- END ------------------- - /* MISC, hsiao_ho, 2014.07.11 */ - //---------------------------------------- - - /* for some IC need to set 4 TxAGC value at one times, suggest by Stanley, 2015.05.25 */ - HW_VAR_TXAGC_NEED_SET_4_RATE_AT_ONCE, - - HW_VAR_FCS_NOA, - HW_VAR_FCS_ADJUST_TSF, - - //--------------- START ------------------ - /*Avoid Rx DPC watchdog violation*/ - HW_VAR_RWPTR_RX_INTERRUPT_LOOP_BREAK, - HW_VAR_AVOID_RX_DPC_WATCHDOG_VIOLATION, - //---------------- END ------------------- - HW_VAR_TX_COMPLETE_LATER_SUPPORT, - - //--------------- START ------------------ - // MAC Address Randomization - // True : Support MAC Address Randomization and DeviceAddress ( Support 4 or more MAC register) - // Fslse : Just support One of MAC Address Randomization and DeviceAddress ( Just Support 2 MAC register ) - HW_VAR_MAC_ADRESS_COX_CAP, // Just For Query !! - // Write New MAC Address - HW_VAR_MAC_ADDR_RANDOM , // Just For Set !! - //---------------- END ------------------- - -#if INTEL_RTD3_SUPPORT - HW_VAR_RTD3_SUPPORT, -#endif - -}HW_VARIABLES; - -// Defaine the interrupt of AP_IBSS mode -typedef enum _HAL_AP_IBSS_INT_MODE -{ - HAL_AP_IBSS_INT_DISABLE = 0, // Disable AP/IBSS - HAL_AP_IBSS_INT_AP = 1, // Enable AP mode - HAL_AP_IBSS_INT_IBSS = 2, // Eanble IBSS mode - HAL_AP_IBSS_INT_AP_IBSS = 3, // Enbale both of AP and IBSS mode -}HAL_AP_IBSS_INT_MODE, *PHAL_AP_IBSS_INT_MODE; - -typedef enum _HAL_INT_MASK_TYPE -{ - HAL_INT_MASK_CURRENT = 0, - HAL_INT_MASK_REG = 1, - HAL_INT_MASK_DEFAULT = 2, -}HAL_INT_MASK_TYPE, *PHAL_INT_MASK_TYPE; - -typedef enum _HAL_HW_TIMER_TYPE -{ - HAL_TIMER_NONE = 0, - HAL_TIMER_TXBF = 1, - HAL_TIMER_EARLYMODE = 2, -}HAL_HW_TIMER_TYPE, *PHAL_HW_TIMER_TYPE; - - -typedef enum _HAL_DEF_VARIABLE{ - HAL_DEF_LED, // Led, 0: disable, 1: enable. 061010, by rcnjko. - HAL_DEF_WOWLAN, - HAL_DEF_ENDPOINTS, //number of endpoints - HAL_DEF_MIN_TX_POWER_DBM, // The min supported Tx power in dBm. - HAL_DEF_MAX_TX_POWER_DBM, // The max supported Tx power in dBm. - HAL_DEF_EFUSE_REPG_SECTION1_FLAG,// Efuse Section1 re-programming flag, added by Roger, 2009.02.19. - HAL_DEF_EFUSE_REPG_DATA, // Efuse Section1 re-programming flag, added by Roger, 2009.02.19. - HAL_DEF_PCI_SUUPORT_L1_BACKDOOR, // Determine if the L1 Backdoor setting is turned on. - HAL_DEF_PCI_AMD_L1_SUPPORT, // Determine if the L1 Backdoor setting can be turned on for AMD bridge, added by Roger, 2012.04.30. - HAL_DEF_THERMAL_VALUE, - HAL_DEF_USB_IN_TOKEN_REV, // For Intel ATOM CPU utilization issue, added by Roger, 2009.06.04. - HAL_DEF_TX_PWR_PERCENTAGE, // For WNC NEC TxPwr adjustment purpose, added by Roger, 2010.03.09. - HAL_DEF_USB_SELECTIVE_SUSPEND, - HAL_DEF_REMOTE_WAKEUP, - HAL_DEF_TX_FEEDBACK_SUPPORT, // Determine if it supports Tx Feedback through C2H, by Hana, 2015.02.10 - // 2011/01/12 MH Add for 9xp compatiable. - HAL_DEF_BEACON_QUEUE, // Get the Beacon Queue ID for sending the Beacon packet. If the returned value is beacon queue, it must support HW Beacon. By Bruce, 2011-01-18. - HAL_DEF_HW_BEACON_SUPPORT, // Determine if it supports HW Beacon sent in TBTT automatically. By Bruce, 2011-01-18. - HAL_DEF_HW_P2P_PS_SUPPORT, // Determine if HW supports HW P2P Power Save function - HAL_DEF_PRODUCT_ID, - HAL_DEF_SUB_ID, - HAL_DEF_EFUSE_USAGE, //Get current EFUSE utilization. 2008.12.19. Added by Roger. - HAL_DEF_EFUSE_BYTES, - HAL_DEF_AUTOLOAD_STATUS, //Get current autoload status, 0: autoload success, 1: autoload fail. 2008.12.19. Added by Roger. - HAL_DEF_EFUSE_BT_USAGE, //Get current BT EFUSE utilization. 2008.12.19. Added by Roger. - HAL_DEF_EFUSE_BT_BYTES, - // 2011/09/07 MH Add for netgear requirement. - HAL_DEF_GAIN_OFFSET_FCC_LOW, - HAL_DEF_GAIN_OFFSET_FCC, - HAL_DEF_GAIN_OFFSET_FCC_HIGH, - HAL_DEF_GAIN_OFFSET_MKK_LOW, - HAL_DEF_GAIN_OFFSET_MKK, - HAL_DEF_GAIN_OFFSET_MKK_HIGH, - HAL_DEF_GAIN_OFFSET_ETSI_LOW, - HAL_DEF_GAIN_OFFSET_ETSI, - HAL_DEF_GAIN_OFFSET_ETSI_HIGH, - HAL_DEF_AP_IBSS_INTERRUPT, // Configure the interrupt mask of AP/IBSS mode - HAL_DEF_ENABLE_TXOK_INTERRUPT, - HAL_DEF_CHECK_NIC_UNPLUG, // Check the interrupt state of NIC if it is unplugged. - HAL_DEF_USE_RA_MASK, // Control RAMask - //3 VHT/HT HW SUPPORT CAP - HAL_DEF_TX_LDPC, // TX LDPC support - HAL_DEF_RX_LDPC, // RX LDPC support - HAL_DEF_TX_STBC, // TX STBC support - HAL_DEF_RX_STBC, // RX STBC support - HAL_DEF_RX_AMPDU_FACTOR, // For different AMPDU factor in HT Cap, added by Roger, 2011.12.08. - HAL_DEF_MPDU_DENSITY, // For different minimum timing between MPDUs in HT Cap, added by Roger, 2011.12.08. - HAL_DEF_EXPLICIT_BEAMFORMER,// Explicit Compressed Steering Capable - HAL_DEF_EXPLICIT_BEAMFORMEE,// Explicit Compressed Beamforming Feedback Capable - HAL_DEF_RA_DECISION_RATE, // For 88E Rate Adaptive, added by YJ, 2012,01,19 - HAL_DEF_RA_SGI, // For 88E Rate Adaptive, added by YJ, 2012,01,19 - HAL_DEF_PT_PWR_STATUS, // For 88E Rate Adaptive, added by Wilson, 2012,02,02 - HAL_DEF_INT_MASK, - HAL_DEF_USB_TX_THREAD, - HAL_DEF_USB_IO_THREAD, - HAL_DEF_TX_PAGE_BOUNDARY, - HAL_DEF_TX_PAGE_BOUNDARY_WOWLAN, - HAL_DEF_SUPPORT_5G, - HAL_DEF_RTS_EN, - HAL_DEF_ANT_DETECT, // Antenna detection mechanism, added by Roger, 2012.11.27. - HAL_DEF_PCI_ASPM_OSC, // Support for ASPM OSC, added by Roger, 2013.03.27. - HAL_DEF_IQK_STATUS, - HAL_DEF_FW_FCS, - HAL_DEF_FCS_QPKT_BY_MACID, - HAL_DEF_ANT_DIV, - HAL_DEF_MAC_ADRESS_COX_CAP -}HAL_DEF_VARIABLE; - - -// The type used to query whether the interrupt in HAL is toggled. -typedef enum _HAL_INT_TYPE -{ - HAL_INT_TYPE_ANY, // Any interrupt - HAL_INT_TYPE_TBDOK, // Tx Beacon OK - HAL_INT_TYPE_TBDER, // Tx Beacon error - HAL_INT_TYPE_BcnInt, // For 92C or later, it should be early beacon interrupt. - HAL_INT_TYPE_PSTIMEOUT, // PS timer interrupt by TSF - HAL_INT_TYPE_C2HCMD, // CPU to Host Command INT Status interrupt - HAL_INT_TYPE_RXFOVW, // Rx FIFO over flow - HAL_INT_TYPE_TXFOVW, // Tx FIFO over flow - HAL_INT_TYPE_VIDOK, // VI queue DMA OK - HAL_INT_TYPE_VODOK, // VO queue DMA OK - HAL_INT_TYPE_BEDOK, // BE queue DMA OK - HAL_INT_TYPE_BKDOK, // BK queue DMA OK - HAL_INT_TYPE_MGNTDOK, // Mgnt queue DMA OK - HAL_INT_TYPE_HIGHDOK, // High queue DMA OK - HAL_INT_TYPE_BDOK, // Beacon queue DMA OK - HAL_INT_TYPE_CPWM, // CPU power Mode exchange INT Status - HAL_INT_TYPE_CPWM2, // CPU power Mode exchange INT Status - HAL_INT_TYPE_TSF_BIT32_TOGGLE, // TSF Timer BIT32 toggle indication interrupt - HAL_INT_TYPE_RX_OK, // Receive DMA OK - HAL_INT_TYPE_RDU, - HAL_INT_TYPE_HSISR_IND, // HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) . By YJ,120406 - HAL_INT_TYPE_SYS_PDNINT, // System Interrupt: Hardware Power Down PIN Negedge Interrupt. By YJ,120406 - HAL_INT_TYPE_SYS_RONINT, // System Interrupt: Hardware Power Down PIN Negedge Interrupt. By YJ,120406 - HAL_INT_TYPE_GPIO9_INT, - HAL_INT_TYPE_AMPDU_BURST_TIMER, // Timer/Counter 4 interrupt. - HAL_INT_TYPE_BEAMFORMING_TIMER,// Timer/Counter 3 interrupt. - //==== SDIO Specified Interrupt=====// - //HAL_INT_TYPE_SDIO_ISR_IND, - HAL_INT_TYPE_SDIO_GPIO12_0_INT, - HAL_INT_TYPE_SDIO_SPS_OCP_INT, - HAL_INT_TYPE_SDIO_RON_INT_EN, - //HAL_INT_TYPE_SDIO_PDNINT, -}HAL_INT_TYPE, *PHAL_INT_TYPE; - -#ifdef REMOVE_PACK -#pragma pack(1) -#endif - -typedef struct _EEPROM_OFFSET{ - u2Byte CmdRegister; - u2Byte BIT_EEDO; - u2Byte BIT_EEDI; - u2Byte BIT_EESK; - u2Byte BIT_EECS; - u2Byte BIT_EEM0; - u2Byte BIT_EEM1; -}EEPROM_OFFSET,*PEEPROM_OFFSET; - -#ifdef REMOVE_PACK -#pragma pack() -#endif - - -// Power save mode configured. -typedef enum _RT_PS_MODE -{ - eActive, // Active/Continuous access. - eMaxPs, // Max power save mode. - eFastPs, // Fast power save mode. - eAutoPs, // Auto power save mode. -}RT_PS_MODE; - -// Power save state of this station. -typedef enum _RT_PS_STATE -{ - eAwake, - eAwakening, - eDozed, - eDozing -}RT_PS_STATE; - -// Inactive Power save state of this station. tynli_Test -typedef enum _RT_IPS_STATE -{ - eIPSAwake, - eIPSDozed -}RT_IPS_STATE; - - -// RF state. -typedef enum _RT_RF_POWER_STATE -{ - eRfOn, // RF is on after RFSleep or RFOff - eRfSleep, // 802.11 Power Save mode - eRfOff, // HW/SW Radio OFF or Inactive Power Save - //=====Add the new RF state above this line=====// - eRFMax -}RT_RF_POWER_STATE; - -// Device power state. -typedef enum _RT_DEVICE_POWER_STATE -{ - DeviceStateUnspecified = 0, - DevicePowerStateD0, - DevicePowerStateD1, - DevicePowerStateD2, - DevicePowerStateD3, - DevicePowerStateMaximum -}RT_DEVICE_POWER_STATE; - -typedef enum _Inactive_POWER_SAVE_STATE -{ - eIpsOff, - eIpsOn, - eIpsAuto -}Inactive_POWER_SAVE_STATE; - - - - -#ifdef REMOVE_PACK -#pragma pack(1) -#endif - -typedef struct _RT_ISR_CONTENT -{ - union{ - u4Byte IntArray[2]; - u4Byte IntReg4Byte; - u2Byte IntReg2Byte; - }; - - u8Byte IntReg8Byte; - u4Byte RxIntLength; -}RT_ISR_CONTENT, *PRT_ISR_CONTENT; - -#ifdef REMOVE_PACK -#pragma pack() -#endif - -typedef enum _HAL_INT_MODE -{ - HAL_INT_MODE_LOCAL = 0, // The local interrupt - HAL_INT_MODE_SYSTEM = 1, // The system interrupt -}HAL_INT_MODE, *PHAL_INT_MODE; - -typedef enum _SCAN_OPERATION_BACKUP_OPT{ - SCAN_OPT_BACKUP_BAND0=0, - SCAN_OPT_BACKUP_BAND1, - SCAN_OPT_RESTORE, - SCAN_OPT_MAX -}SCAN_OPERATION_BACKUP_OPT; - - -// Related IO. -typedef enum _IO_TYPE{ - IO_CMD_PAUSE_BAND0_DM_BY_SCAN = 0, - IO_CMD_PAUSE_BAND1_DM_BY_SCAN = 1, - IO_CMD_RESUME_DM_BY_SCAN = 2, -}IO_TYPE,*PIO_TYPE; - - -//LeisurePS state -typedef enum _LEISURE_POWER_SAVE_STATE -{ - eLpsOff, - eLpsOn, - eLpsAuto -}LEISURE_POWER_SAVE_STATE; - -// Firmware PS mode for control LPS. by tynli. -typedef enum _FW_CTRL_PS_MODE_NUM{ - FW_PS_ACTIVE_MODE =0, - //Legacy - FW_PS_MIN_MODE =1, - FW_PS_MAX_MODE =2, - FW_PS_SELF_DEFINED_MODE = 3, - //UAPSD - FW_PS_UAPSD_MIN_MODE = 4, - FW_PS_UAPSD_MAX_MODE = 5, - FW_PSE_UAPSD_SELF_DEFINED_MODE = 6, - FW_PS_NUM_MODE= 7, -}FW_CTRL_PS_MODE; - -typedef enum _FW_IPS_MODE{ - FW_IPS_ACTIVE_MODE = 0, - FW_IPS_SCAN_MODE = 1, - FW_IPS_CARD_DISABLE_MODE = 2, - FW_IPS_RF_OFF_MODE = 3, - FW_IPS_MAX, -}FW_CTRL_IPS_MODE; - -// Define WoWLAN mode. Added by tynli. 2009.09.02. -typedef enum _WAKE_ON_WLAN_MODE -{ - eWoWLANDisable, - eWakeOnMagicPacketOnly, - eWakeOnPatternMatchOnly, - eWakeOnBothTypePacket -}WAKE_ON_WLAN_MODE; - -#define WAKE_ON_MAGIC_PACKET BIT0 -#define WAKE_ON_PATTERN_MATCH BIT1 -#define WAKE_ON_UNICAST_PACKET BIT2 - -// After 8188E, Hw supports indicating wake packet type in Rx Desc. 2013.10.01. by tynli. -#define HW_SUPPORT_PARSING_WAKE_PACKET(_Adapter) TRUE - -// Fw scan offload type -#define SCAN_OFFLOAD_TYPE_D0 BIT0 -#define SCAN_OFFLOAD_TYPE_D3 BIT1 - -typedef enum _RT_P2P_PS_EXE_TYPE -{ - RT_P2P_PS_EXE_BY_NONE = 0, // Not Specified - RT_P2P_PS_EXE_BY_HW = 1, // Execute the P2P Power Save by HW/FW, such as 8723 - RT_P2P_PS_EXE_BY_SW_HW_TIMER = 2, // Execute the P2P Power Save by Driver and using HW Timer, suach as 8192CE - RT_P2P_PS_EXE_BY_SW_TIMER = 3, // Execute the P2P Power Save by Driver but using SW Timer (Workitem), such as 8192CU -}RT_P2P_PS_EXE_TYPE, *PRT_P2P_PS_EXE_TYPE; - - -#ifdef REMOVE_PACK -#pragma pack(1) -#endif - -// -// This is a partial structure of NDIS_PM_PROTOCOL_OFFLOAD which is defined in N62, -// for multi-platform/multi-chipset architecture requirement, we define it in HAL. -// Added by tynli. 2009.08.05. -// -typedef struct _RT_PM_PROTOCOL_OFFLOAD { - union _RT_PROTOCOL_OFFLOAD_PARAMETERS { - struct _RT_IPV4_ARP_PARAMETERS { - u4Byte Flags; - u1Byte RemoteIPv4Address[4]; - u1Byte HostIPv4Address[4]; - u1Byte MacAddress[6]; - } IPv4ARPParameters; - struct _RT_IPV6_NS_PARAMETERS { - ULONG Flags; - u1Byte RemoteIPv6Address[16]; - u1Byte SolicitedNodeIPv6Address[16]; - u1Byte MacAddress[6]; - u1Byte TargetIPv6Addresses[2][16]; - } IPv6NSParameters; - struct _RT_DOT11_RSN_REKEY_PARAMETERS { - u4Byte Flags; - u1Byte KCK[16]; - u1Byte KEK[16]; - u8Byte KeyReplayCounter; - } Dot11RSNRekeyParameters; - } ProtocolOffloadParameters; -} RT_PM_PROTOCOL_OFFLOAD, *PRT_PM_PROTOCOL_OFFLOAD; - - -typedef struct _RT_PM_IPV4_ARP_PARAMETERS { - u4Byte Flags; - u1Byte RemoteIPv4Address[4]; - u1Byte HostIPv4Address[4]; - u1Byte MacAddress[6]; -} RT_PM_IPV4_ARP_PARAMETERS, *PRT_PM_IPV4_ARP_PARAMETERS; - -typedef struct _RT_PM_IPV6_NS_PARAMETERS { - ULONG Flags; - u1Byte RemoteIPv6Address[16]; - u1Byte SolicitedNodeIPv6Address[16]; - u1Byte MacAddress[6]; - u1Byte TargetIPv6Addresses[2][16]; -} RT_PM_IPV6_NS_PARAMETERS, *PRT_PM_IPV6_NS_PARAMETERS; - -typedef struct _RT_PM_DOT11_RSN_REKEY_PARAMETERS { - u4Byte Flags; - u1Byte KCK[16]; - u1Byte KEK[16]; - u8Byte KeyReplayCounter; -} RT_PM_DOT11_RSN_REKEY_PARAMETERS, *PRT_PM_DOT11_RSN_REKEY_PARAMETERS; - - -// -// Network list offload structures -// -#define NATIVE_802_11_MAX_NETWORKOFFLOAD_SIZE 10 - -typedef struct _RT_OFFLOAD_NETWORK -{ - u1Byte ssidbuf[32]; - u4Byte ssidlen; - u1Byte chiper; // Used PAIRWISE_CHIPER !! - ULONG channelNumberHit[4]; - BOOLEAN bPrivacy; - u4Byte SecLvl; -}RT_OFFLOAD_NETWORK,*PRT_OFFLOAD_NETWORK; - -typedef struct _RT_NLO_INFO -{ - ULONG NumDot11OffloadNetwork; - ULONG FastScanPeriod; - ULONG FastScanIterations; - ULONG SlowScanPeriod; - RT_OFFLOAD_NETWORK dDot11OffloadNetworkList[NATIVE_802_11_MAX_NETWORKOFFLOAD_SIZE]; -}RT_NLO_INFO, *PRT_NLO_INFO; - -typedef struct _RT_AOAC_REPORT_{ - u8Byte TxIV; - u8Byte ReplayCounterOfEapolKey; - u1Byte GroupKey[32]; - u1Byte KeyIndex; - u1Byte SecurityType; -}RT_AOAC_REPORT, *PRT_AOAC_REPORT; - -#ifdef REMOVE_PACK -#pragma pack() -#endif - -// -// Determine how we handle the Beacon sent, by Bruce, 2011-01-18. -// By the following definition, we should schedule the timer if we use the SW beacon or handle the TBTT timing. -#define BEACON_SEND_AUTO_HW 0 // (Beacon Queue) HW updates Beacon buffer automatically (by interrupts or events) and the packets can be sent in TBTT automatically. -#define BEACON_SEND_AUTO_SW 1 // (Beacon Queue) SW needs to updates the Beacon by self timer but the HW can send the Beacons in TBTT. -#define BEACON_SEND_MANUAL 2 // (AC/MGNT/HIGN Queue) SW needs to updates the Beacon and send it by self timer. In other words, we need to handle the TBTT timing. - - -// -// Cannot perform IO. We can add more conditions to indicate the IO fail status. -// By Bruce, 2008-02-18. -// -#define RT_PCI_CANNOT_IO(__pAdapter) \ - ((__pAdapter)->bDriverStopped || \ - (__pAdapter)->bSurpriseRemoved || \ - RT_IS_FUNC_DISABLED((__pAdapter), (DF_IO_BIT | DF_IO_D3_BIT))) - -#define RT_USB_CANNOT_IO(__pAdapter) \ - ((__pAdapter)->bDriverStopped || \ - (__pAdapter)->bSurpriseRemoved || \ - RT_IS_FUNC_DISABLED((__pAdapter), DF_IO_BIT)) - -#define RT_SDIO_CANNOT_IO(__pAdapter) \ - ((__pAdapter)->bDriverStopped || \ - (__pAdapter)->bSurpriseRemoved || \ - RT_IS_FUNC_DISABLED((__pAdapter), DF_IO_BIT)) - -#define RT_DRIVER_STOP(__pAdapter) \ - ((__pAdapter)->bDriverStopped || \ - (__pAdapter)->bSurpriseRemoved || \ - (__pAdapter)->bDriverIsGoingToUnload) - - -#define RT_DRIVER_HALT(__pAdapter) \ - ((__pAdapter)->bDriverStopped || \ - (__pAdapter)->bSurpriseRemoved) - -#define HAS_REQUEST_TO_HANDLE(__pAdapter) \ - ((__pAdapter)->pPortCommonInfo->pPortHelper->bDeleteMac == TRUE) - -#define MAX_POWER_INDEX 0x3F - - -#define RT_CANNOT_IO(__pAdapter) RT_SDIO_CANNOT_IO(__pAdapter) - - -#define GET_UNDECORATED_AVERAGE_RSSI(_Adapter) \ - (ACTING_AS_AP(_Adapter) || ACTING_AS_IBSS(_Adapter))? \ - (((HAL_DATA_TYPE *)((_Adapter)->HalData))->EntryMinUndecoratedSmoothedPWDB): \ - (((HAL_DATA_TYPE *)((_Adapter)->HalData))->UndecoratedSmoothedPWDB) - - -#define RT_IsSwChnlAndBwInProgress(_Adapter) ( GET_HAL_DATA(_Adapter)->SwChnlInProgress || \ - GET_HAL_DATA(_Adapter)->bSwChnlAndSetBWInProgress || \ - GET_HAL_DATA(_Adapter)->SetBWModeInProgress) - -#define RT_ResetSwChnlProgress(_Adapter) \ -{\ - GET_HAL_DATA(_Adapter)->SwChnlInProgress = FALSE;\ - GET_HAL_DATA(_Adapter)->bSwChnlAndSetBWInProgress = FALSE;\ -} - -#define RT_GetBandWidth(_Adapter) (GET_HAL_DATA(_Adapter)->CurrentChannelBW) -#define RT_GetCenter_Frequency_Index1(_Adapter) (GET_HAL_DATA(_Adapter)->CurrentCenterFrequencyIndex1) -#define RT_GetRFType(_Adapter) (GET_HAL_DATA(_Adapter)->RF_Type) - -// -// Reason to turn off RF, high value indicate high priority. -// -typedef u4Byte RT_RF_CHANGE_SOURCE; -#define RF_CHANGE_BY_SW BIT31 -#define RF_CHANGE_BY_HW BIT30 -#define RF_CHANGE_BY_PS BIT29 -#define RF_CHANGE_BY_IPS BIT28 -#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17. - - -typedef enum _RX_PACKET_TYPE{ - NORMAL_RX, - TX_REPORT1, - TX_REPORT2, - HIS_REPORT, - C2H_PACKET -}RX_PACKET_TYPE, *PRX_PACKET_TYPE; - - - -typedef u1Byte -(*NicGetEEPROMSizeHandler)( - IN PADAPTER Adapter - ); - -typedef RT_STATUS -(*NicReadAdapterInfoHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicInitializeVariablesHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicDeInitializeVariablesHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicCancelAllTimerHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicReleaseAllTimerHandler)( - IN PADAPTER Adapter - ); - -typedef RT_STATUS -(*NicInitializeAdapterHandler)( - IN PADAPTER Adapter, - IN u1Byte Channel - ); - -typedef VOID -(*NicHalUpdateDefaultSettingHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicHalIntUpdateDefSetHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicHaltAdapterHandler)( - IN PADAPTER Adapter, - IN BOOLEAN bReset - ); - - -typedef VOID -(*NicShutdownAdapterHandler)( - IN PADAPTER Adapter, - IN BOOLEAN bReset - ); - -typedef VOID -(*NicSleepAdapterHandler)( - IN PADAPTER Adapter - ); - - -typedef void -(*NicSetHwRegHandler)( - IN PADAPTER Adapter, - IN u1Byte RegName, - IN pu1Byte val - ); - -typedef void -(*NicGetHwRegHandler)( - IN PADAPTER Adapter, - IN u1Byte RegName, - OUT pu1Byte val - ); - -typedef BOOLEAN -(*NicGetHalDefVarHandler)( - IN PADAPTER Adapter, - IN HAL_DEF_VARIABLE eVariable, - IN PVOID pValue - ); - -typedef BOOLEAN -(*NicSetHalDefVarHandler)( - IN PADAPTER Adapter, - IN HAL_DEF_VARIABLE eVariable, - IN PVOID pValue - ); - -typedef BOOLEAN -(*NicGetInterruptHandler)( - IN PADAPTER Adapter, - IN HAL_INT_TYPE intType - ); - -typedef u1Byte -(*NicGetHwRateFromMRateHandler)( - IN u1Byte rate - ); - -typedef VOID -(*NicQueryRxDescStatusHandler)( - IN PADAPTER Adapter, - IN PVOID pDesc, - IN OUT PRT_RFD pRfd - ); - -typedef VOID -(*NicTxFillDescriptorHandler)( - IN PADAPTER Adapter, - IN PRT_TCB pTcb, - IN u2Byte nBufIndex, - IN u2Byte nFragIndex, - IN u2Byte nFragBufferIndex, - IN u2Byte nCurDesc - ); - -typedef VOID -(*NicQueryTxDescStatusHandler)( - IN PADAPTER Adapter, - IN PVOID pDesc, - OUT PRT_TCB_STATUS pRtTcbStatus - ); - -typedef VOID -(*NicSetWirelessModeHandler)( - IN PADAPTER Adapter, - IN u2Byte bWirelessMode - ); - - -typedef u2Byte -(*NicGetSupportedWirelessModeHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicSwChnlByDelayHandler)( - IN PADAPTER Adapter, - IN u1Byte channel - ); - -typedef VOID -(*NicSwChnlByTimerHandler)( - IN PADAPTER Adapter, - IN u1Byte channel - ); - -typedef void -(*NicSetTxPowerLevelHandler)( - IN PADAPTER Adapter, - IN u1Byte channel - ); - -typedef void -(*NicGetTxPowerLevelHandler)( - IN PADAPTER Adapter, - OUT ps4Byte powerlevel - ); - -typedef BOOLEAN -(*NicUpdateTxPowerDbmHandler)( - IN PADAPTER Adapter, - IN s4Byte powerInDbm - ); - - -typedef BOOLEAN -(*NicSetTxAntennaHandler)( - IN PADAPTER Adapter, - IN u1Byte SelectedAntenna - ); - -typedef VOID -(*NicEnableHWSecurityConfigHandler)( - IN PADAPTER Adapter); - -typedef VOID -(*NicDisableHWSecurityConfigHandler)( - IN PADAPTER Adapter); - -typedef VOID -(*NicSetKeyHandler)( - IN PADAPTER Adapter, - IN u4Byte KeyIndex, - IN pu1Byte pMacAddr, - IN BOOLEAN IsGroup, - IN u4Byte EncAlgo, - IN BOOLEAN IsWEPKey,//if OID = OID_802_11_WEP - IN BOOLEAN ClearAll -); - -typedef VOID -(*NicAllowAllDestAddrHandler)( - IN PVOID Adapter, - IN BOOLEAN bAllowAllDA, - IN BOOLEAN WriteIntoReg -); - -typedef VOID -(*NicAllowErrorPacketHandler)( - IN PVOID Adapter, - IN BOOLEAN bAllowErrPkt, - IN BOOLEAN WriteIntoReg -); - -typedef VOID -(*NicSetMonitorModeHandler)( - IN PADAPTER Adapter, - IN BOOLEAN bEnableMonitorMode -); - - -typedef VOID -(*NicLedControlHandler)( - IN PVOID Adapter, - IN LED_CTL_MODE LedAction -); - -typedef VOID -(*NicHalEnableRxHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalDisableRxHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalEnableTxHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalDisableTxHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalLeaveSSHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalEnterSSHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalResetAllTimerHandler)( - IN PADAPTER pAdapter - ); - -typedef BOOLEAN -(*NicInterruptRecognizedHandler)( - IN PADAPTER Adapter, - IN PVOID pContent, - IN u4Byte ContentLen - ); - -typedef VOID -(*NicDisableInterruptHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicClearInterruptHandler)( - IN PADAPTER Adapter - ); - -typedef VOID -(*NicEnableInterruptHandler)( - IN PADAPTER Adapter - ); - -// -// Runtime D3 related function handler, added by Roger, 2013.02.05. -// -#if INTEL_RTD3_SUPPORT -typedef VOID -(*NicHalRTD3LeaveHandler)( - IN PADAPTER pAdapter - ); - -typedef VOID -(*NicHalRTD3EnterHandler)( - IN PADAPTER pAdapter - ); -#endif - -typedef RT_STATUS -(*NicHalSetRsvdPageBndyHandler)( - IN PADAPTER Adapter, - IN u1Byte Type -); - -typedef VOID -(*NicHalDownloadRsvdPageHandler)( - IN PADAPTER Adapter -); - -typedef VOID -(*NicHalGetAOACReportHandler)( - IN PADAPTER Adapter, - IN pu1Byte AOACRptBuf -); - -typedef VOID -(*NicHalDropRxFIFOHandler)( - IN PADAPTER Adapter -); - -// -// <Roger_TODO> We should declare SDIO related function handler here!! -// 2010.12.20. -// -typedef VOID -(*NicHalSdioGetCmdAddressHandler)( - IN PADAPTER pAdapter, - IN u1Byte DeviceID, - IN u4Byte Addr, - OUT pu4Byte pCmdAddr - ); - -typedef BOOLEAN -(*NicHalSdioSetQueueMappingHandler)( - IN PADAPTER pAdapter, - IN u1Byte NumIn, - IN u1Byte NumOut - ); - - -typedef BOOLEAN -(*NicHalSdioQueryTxBufferStatusHandler)( - IN PADAPTER Adapter - ); - -typedef BOOLEAN -(*NicHalSdioQueryTxBufferAvailableHandler)( - IN PADAPTER Adapter, - IN PSDIO_OUT_CONTEXT pContext - ); - -typedef BOOLEAN -(*NicHalSdioIoRegCmd52AvailableHandler)( - IN PADAPTER Adapter, - IN u4Byte offset - ); - -typedef VOID -(*NicHalSdioTxCompleteHandler)( - IN PADAPTER pAdapter, - IN PSDIO_OUT_CONTEXT pContext, - IN u4Byte status - ); - -typedef BOOLEAN -(*NicRxHandleInterruptHandler)( - IN PADAPTER pAdapter -); - -typedef VOID -(*NicClearSysInterruptHandler)( - IN PADAPTER Adapter - ); - -typedef BOOLEAN -(*NicHalSdioQueryRxDMARequestHandler)( - IN PADAPTER Adapter, - OUT pu2Byte pRxReqLength - ); - -typedef VOID -(*NicHalRxAggrHandler)( - IN PADAPTER pAdapter, - IN BOOLEAN Value - ); - -typedef BOOLEAN -(*NicHalUsbSetQueuePipeMappingHandler)( - IN PADAPTER pAdapter, - IN u1Byte NumInPipe, - IN u1Byte NumOutPipe - ); - -typedef u4Byte -(*NicGetRxPacketShiftBytesHandler)( - PRT_RFD pRfd -); - -typedef VOID -(*NICInitHalRATRTableHandler)( - IN PADAPTER Adapter -); - -typedef VOID -(*NICUpdateHalRATRTableHandler)( - IN PADAPTER Adapter, - IN POCTET_STRING posLegcyRate, - IN pu1Byte pMcsRate, - IN PRT_WLAN_STA pEntry -); - -typedef VOID -(*NICResetHalRATRTableHandler)( - IN PADAPTER Adapter -); - - -typedef VOID -(*NICUpdateHalRAMaskHandler)( - IN PADAPTER Adapter, - IN u1Byte macId, - IN PRT_WLAN_STA pEntry, - IN u1Byte rssi_level -); - -typedef VOID -(*NICResetHalRAMaskHandler)( - IN PADAPTER Adapter -); - -typedef VOID -(*NICRAPostActionHandler)( - IN PVOID pDM_Odm -); - -typedef VOID -(*NICUpdateLPSStatusHandler)( - IN PADAPTER Adapter, - IN u1Byte RegLeisurePsMode, - IN u1Byte RegPowerSaveMode -); - -typedef VOID -(*NICUpdateIPSStatusHandler)( - IN PADAPTER Adapter, - IN u1Byte RegInactivePsMode -); - -typedef VOID -(*NICSetBWModeHandler)( - IN PADAPTER Adapter, - IN CHANNEL_WIDTH ChnlWidth, - IN EXTCHNL_OFFSET Offset -); - -typedef RT_STATUS -(*NICCmdSendPacketHandler)( - PADAPTER Adapter, - PRT_TCB pTcb, - PRT_TX_LOCAL_BUFFER pBuf, - u4Byte BufferLen, - u1Byte PacketType, - BOOLEAN bLastInitPacket -); - -typedef VOID -(*NicSetBeaconRelatedRegistersHandler)( - IN PADAPTER Adapter, - IN PVOID pOpMode, - IN u2Byte BcnInterval, - IN u2Byte AtimWindow -); - -typedef VOID -(*NicDumpHardwareProfileHandler)( - IN PADAPTER Adapter -); - -typedef u4Byte -(*NicRxCommandPacketHandler)( - PADAPTER Adapter, - PRT_RFD pRfd -); - - -typedef VOID -(*NicScanOperationBackupHandler)( - IN PADAPTER Adapter, - IN u1Byte Operation -); - -typedef BOOLEAN -(*NicCheckHWStopHandler)( - IN PADAPTER Adapter -); - -typedef VOID -(*NicTxFillCmdDescHandler)( - IN PADAPTER Adapter, - IN PRT_TCB pTcb, - IN u1Byte QueueIndex, - IN u2Byte index, - IN BOOLEAN bFirstSeg, - IN BOOLEAN bLastSeg, - IN pu1Byte VirtualAddress, - IN u4Byte PhyAddressLow, - IN u4Byte BufferLen, - IN u4Byte DescPacketType, - IN u4Byte PktLen -); - -typedef BOOLEAN -(*NicGetNmodeSupportBySecCfgHandler)( - IN PADAPTER Adapter); - -typedef BOOLEAN -(*NicGetNmodeSupportBySWSecHandler)( - IN PADAPTER Adapter); - - -typedef VOID -(*NicCountTxStatisticsHandler)( - IN PADAPTER Adapter, - IN PRT_TCB pTcb - -); - -typedef BOOLEAN -(*NicQuerySysCpuWakeHandler)( - IN PADAPTER Adapter -); - -typedef VOID -(*NicGPIOChangeRFHandler)( - IN PADAPTER Adapter, - IN u1Byte variable -); - - -typedef BOOLEAN -(*NicSwAntDivCheckBeforeLink)( - IN PDM_ODM_T pDM_Odm - //IN PADAPTER Adapter - ); - -typedef BOOLEAN -(*NicPathDivCheckBeforeLink)( - IN PDM_ODM_T pDM_Odm - //IN PADAPTER Adapter - ); - -typedef VOID -(*NicHalSetCTSDynamicBWSelectHandler)( - IN PADAPTER Adapter, - IN u1Byte BWFallBackLevel -); - -typedef VOID -(*NicSetFwRelatedForWoWLANHandler)( - IN PADAPTER Adapter, - IN BOOLEAN bHostIsGoingtoSleep -); - -typedef VOID -(*NICSwChnlAndSetBwHandler)( - IN PADAPTER Adapter, - IN BOOLEAN bSwitchChannel, - IN BOOLEAN bSetBandWidth, - IN u1Byte ChannelNum, - IN CHANNEL_WIDTH ChnlWidth, - IN EXTCHNL_OFFSET ExtChnlOffsetOf40MHz, - IN EXTCHNL_OFFSET ExtChnlOffsetOf80MHz, - IN u1Byte CenterFrequencyIndex1 -); - -typedef u4Byte -(*NicFillH2CCommandHandler)( - IN PADAPTER Adapter, - IN u1Byte ElementID, - IN u4Byte CmdLen, - IN pu1Byte pCmdBuffer -); - -typedef u1Byte -(*NicGetFwPsStateDefHandler)( - IN PADAPTER Adapter, - IN u1Byte FwPsState -); - -typedef BOOLEAN -(*NicCheckCPWMInterruptHandler)( - IN PADAPTER Adapter -); - -typedef VOID -(*NicWaitForH2CQueueEmptyHandler)( - IN PADAPTER Adapter -); - -typedef struct _HAL_INTERFACE{ - // Pointer - pu1Byte pDescString; - - // Structure pointer - PEEPROM_OFFSET pEEPROMOffset; - - // Preamble. - BOOLEAN bUseShortPreamble; - - // Capability. - BOOLEAN bSupportTbttNotification; // TRUE if the H/W can notify S/W before TBTT. - - // CCX supported version - u1Byte CcxVerSupported; // 0: means not support CCX, > 0: are the version of CCX supported by this IC. - - // WLAN Device operations. - NicGetEEPROMSizeHandler GetEEPROMSizeHandler; - NicReadAdapterInfoHandler ReadAdapterInfoHandler; - - NicInitializeVariablesHandler InitializeVariablesHandler; - NicDeInitializeVariablesHandler DeInitializeVariablesHandler; - NicCancelAllTimerHandler CancelAllTimerHandler; - NicReleaseAllTimerHandler ReleaseAllTimerHandler; - - NicInitializeAdapterHandler InitializeAdapterHandler; - NicHalUpdateDefaultSettingHandler HalUpdateDefaultSettingHandler; - NicHalIntUpdateDefSetHandler HalIntUpdateDefSetHandler; - - NicHaltAdapterHandler HaltAdapterHandler; - NicShutdownAdapterHandler ShutdownHandler; - NicSleepAdapterHandler SleepAdapterHandler; - - NicSetHwRegHandler SetHwRegHandler; - NicGetHwRegHandler GetHwRegHandler; - - NicGetHalDefVarHandler GetHalDefVarHandler; - NicSetHalDefVarHandler SetHalDefVarHandler; - - NicGetInterruptHandler GetInterruptHandler; - - NicGetHwRateFromMRateHandler GetHwRateFromMRateHandler; - - NicQueryRxDescStatusHandler QueryRxDescStatusHandler; - NicTxFillDescriptorHandler TxFillDescriptorHandler; - NicQueryTxDescStatusHandler QueryTxDescStatusHandler; - - NicSetWirelessModeHandler SetWirelessModeHandler; - NicGetSupportedWirelessModeHandler GetSupportedWirelessModeHandler; - - NicSwChnlByDelayHandler SwChnlByDelayHandler; - NicSwChnlByTimerHandler SwChnlByTimerHandler; - - // Tx Power Related. - NicSetTxPowerLevelHandler SetTxPowerLevelHandler; - NicGetTxPowerLevelHandler GetTxPowerLevelHandler; - NicUpdateTxPowerDbmHandler UpdateTxPowerDbmHandler; - - NicSetTxAntennaHandler SetTxAntennaHandler; - NicSwAntDivCheckBeforeLink SwAntDivCheckBeforeLinkHandler; - NicPathDivCheckBeforeLink PathDivCheckBeforeLinkHandler; - - NicHalSetCTSDynamicBWSelectHandler HalSetCTSDynamicBWSelectHandler; - - NicEnableHWSecurityConfigHandler EnableHWSecCfgHandler; - NicDisableHWSecurityConfigHandler DisableHWSecCfgHandler; - NicSetKeyHandler SetKeyHandler; - - NicAllowAllDestAddrHandler AllowAllDestAddrHandler; - NicAllowErrorPacketHandler AllowErrorPacketHandler; - - NicSetMonitorModeHandler SetMonitorModeHandler; - - NicLedControlHandler LedControlHandler; - - NicHalEnableRxHandler HalEnableRxHandler;//Aadded by Roger, 2007.02.12. - NicHalDisableRxHandler HalDisableRxHandler;//Aadded by Roger, 2007.02.12. - - NicHalDisableTxHandler HalDisableTxHandler;//Aadded by Roger, 2009.07.08. - NicHalEnableTxHandler HalEnableTxHandler;//Aadded by Roger, 2009.07.08. - - NicCountTxStatisticsHandler HalCountTxStatisticsHandler; //Add for count unicast tx bytes temp 2008-04-14 - NicHalResetAllTimerHandler HalResetAllTimerHandler; - - NicHalEnterSSHandler HalEnterSSHandler; //Aadded by Roger, 2007.02.12. - NicHalLeaveSSHandler HalLeaveSSHandler; //Aadded by Roger, 2007.02.12. - - NicInterruptRecognizedHandler InterruptRecognizedHandler; - NicDisableInterruptHandler DisableInterruptHandler; - NicClearInterruptHandler ClearInterruptHandler; - NicEnableInterruptHandler EnableInterruptHandler; - NicDumpHardwareProfileHandler DumpHardwareProfileHandler; - - // - // Runtime D3 related function handler, added by Roger, 2013.02.05. - // -#if INTEL_RTD3_SUPPORT - NicHalRTD3EnterHandler HalRTD3EnterHandler; - NicHalRTD3LeaveHandler HalRTD3LeaveHandler; -#endif - - // HW function - NicHalSetRsvdPageBndyHandler HalSetRsvdPageBndyHandler; - NicHalDownloadRsvdPageHandler HalDownloadRsvdPageHandler; - NicHalGetAOACReportHandler HalGetAOACReportHandler; - NicHalDropRxFIFOHandler HalDropRxFIFOHandler; - - - // - // Bus specific operations. - // - NicHalSdioGetCmdAddressHandler HalSdioGetCmdAddressHandler; - NicHalSdioSetQueueMappingHandler HalSdioSetQueueMappingHandler; - - // - // <Roger_TODO> The following handler should be removed later!! - // - NicHalSdioTxCompleteHandler HalSdioTxCompleteHandler; - NicHalRxAggrHandler HalRxAggrHandler; - NicHalUsbSetQueuePipeMappingHandler HalUsbSetQueuePipeMappingHandler; - NicHalSdioQueryTxBufferStatusHandler HalSdioQueryTxBufferStatusHandler; - NicHalSdioQueryTxBufferAvailableHandler HalSdioQueryTxBufferAvailableHandler; - NicClearSysInterruptHandler ClearSysInterruptHandler; - NicHalSdioQueryRxDMARequestHandler HalSdioQueryRxDMARequestHandler; - NicRxHandleInterruptHandler RxHandleInterruptHandler; - NicHalSdioIoRegCmd52AvailableHandler HalSdioIoRegCmd52AvailableHandler; - - - // Added for 8190 from here - NicGetRxPacketShiftBytesHandler GetRxPacketShiftBytesHandler; - NICInitHalRATRTableHandler InitHalRATRTableHandler; - NICUpdateHalRATRTableHandler UpdateHalRATRTableHandler; - NICResetHalRATRTableHandler ResetHalRATRTableHandler; - NICUpdateHalRAMaskHandler UpdateHalRAMaskHandler; - NICResetHalRAMaskHandler ResetHalRAMaskHandler; - NICRAPostActionHandler RAPostActionHandler; - - NICUpdateLPSStatusHandler UpdateLPSStatusHandler; - NICUpdateIPSStatusHandler UpdateIPSStatusHandler; - NICSetBWModeHandler SetBWModeHandler; - NICCmdSendPacketHandler CmdSendPacketHandler; - NicSetBeaconRelatedRegistersHandler SetBeaconRelatedRegistersHandler; - NicRxCommandPacketHandler RxCommandPacketHandler; - NicCheckHWStopHandler TxCheckStuckHandler; - NicCheckHWStopHandler RxCheckStuckHandler; - NicTxFillCmdDescHandler TxFillCmdDescHandler; - NicGetNmodeSupportBySecCfgHandler GetNmodeSupportBySecCfgHandler; - NicGetNmodeSupportBySWSecHandler GetNmodeSupportBySWSecHandler; - NicScanOperationBackupHandler ScanOperationBackupHandler; - NicGPIOChangeRFHandler GPIOChangeRFHandler; - NicSetFwRelatedForWoWLANHandler SetFwRelatedForWoWLANHandler; - NICSwChnlAndSetBwHandler SwChnlAndSetBWHandler; - //NicH2CCmdActionHandler H2CCmdActionHandler; - NicFillH2CCommandHandler FillH2CCommandHandler; - NicGetFwPsStateDefHandler GetFwPsStateDefHandler; - NicCheckCPWMInterruptHandler CheckCPWMInterruptHandler; - NicWaitForH2CQueueEmptyHandler WaitForH2CQueueEmptyHandler; -}HAL_INTERFACE,*PHAL_INTERFACE; - - -RT_STATUS -HalAssociateNic( - IN PVOID Adapter, - IN BOOLEAN IsDefaultAdapter - ); - -VOID -HalDisassociateNic( - IN PVOID Adapter - ); - -u2Byte -HalGetFirmwareVerison( - IN PADAPTER Adapter - ); - - -u2Byte -HalGetSupportedWirelessMode( - IN PADAPTER pAdapter - ); - -u2Byte -HalChangeWirelessMode( - PADAPTER Adapter, - u1Byte ChannelNum -); - -VOID -Hal_PauseTx( - IN PADAPTER Adapter, - u1Byte type - ); - -// -//2011/01/10 MH Add fro 9xp compatible. -// -typedef enum _SIGNAL_STRENGTH_POLICY{ - SIGNAL_STRENGTH_SCALE_FINE = 0, - SIGNAL_STRENGTH_SCALE_NORMAL = 1, -}SIGNAL_STRENGTH_POLICY; - -typedef enum _InitialGainOpType{ - IG_Backup=0, - IG_Restore, - IG_Max -}InitialGainOpType; - - -typedef enum _VERSION_8192C{ - VERSION_TEST_CHIP_88C = 0x0000, - VERSION_TEST_CHIP_92C = 0x0020, - VERSION_TEST_UMC_CHIP_8723A = 0x0081, - VERSION_NORMAL_TSMC_CHIP_88C = 0x0008, - VERSION_NORMAL_TSMC_CHIP_92C = 0x0028, - VERSION_NORMAL_TSMC_CHIP_92C_1T2R = 0x0018, - VERSION_NORMAL_UMC_CHIP_88C_A_CUT = 0x0088, - VERSION_NORMAL_UMC_CHIP_92C_A_CUT = 0x00a8, - VERSION_NORMAL_UMC_CHIP_92C_1T2R_A_CUT = 0x0098, - VERSION_NORMAL_UMC_CHIP_8723A_1T1R_A_CUT = 0x0089, - VERSION_NORMAL_UMC_CHIP_8723A_1T1R_B_CUT = 0x1089, - VERSION_NORMAL_UMC_CHIP_88C_B_CUT = 0x1088, - VERSION_NORMAL_UMC_CHIP_92C_B_CUT = 0x10a8, - VERSION_NORMAL_UMC_CHIP_92C_1T2R_B_CUT = 0x1090, - VERSION_TEST_CHIP_92D_SINGLEPHY= 0x0022, - VERSION_TEST_CHIP_92D_DUALPHY = 0x0002, - VERSION_NORMAL_CHIP_92D_SINGLEPHY= 0x002a, - VERSION_NORMAL_CHIP_92D_DUALPHY = 0x000a, - VERSION_NORMAL_CHIP_92D_C_CUT_SINGLEPHY = 0x202a, - VERSION_NORMAL_CHIP_92D_C_CUT_DUALPHY = 0x200a, - VERSION_NORMAL_CHIP_92D_D_CUT_SINGLEPHY = 0x302a, - VERSION_NORMAL_CHIP_92D_D_CUT_DUALPHY = 0x300a, - VERSION_NORMAL_CHIP_92D_E_CUT_SINGLEPHY = 0x402a, - VERSION_NORMAL_CHIP_92D_E_CUT_DUALPHY = 0x400a, - VERSION_TEST_CHIP_1T1R_8812 = 0x0004, - VERSION_TEST_CHIP_2T2R_8812 = 0x0024, - VERSION_NORMAL_TSMC_CHIP_1T1R_8812 = 0x100c, - VERSION_NORMAL_TSMC_CHIP_2T2R_8812 = 0x102c, - VERSION_NORMAL_TSMC_CHIP_1T1R_8812_C_CUT = 0x200c, - VERSION_NORMAL_TSMC_CHIP_2T2R_8812_C_CUT = 0x202c, - VERSION_TEST_CHIP_8821 = 0x0005, - VERSION_NORMAL_TSMC_CHIP_8821 = 0x000d, - VERSION_NORMAL_TSMC_CHIP_8821_B_CUT = 0x100d, - VERSION_NORMAL_TSMC_CHIP_8821_C_CUT = 0x200d, - VERSION_TEST_CHIP_1T1R_8723B = 0x0106, - VERSION_NORMAL_SMIC_CHIP_1T1R_8723B = 0x010E, - VERSION_NORMAL_SMIC_CHIP_1T1R_8723B_B_CUT = 0x110E, - VERSION_NORMAL_SMIC_CHIP_1T1R_8723B_D_CUT = 0x310E, - VERSION_NORMAL_SMIC_CHIP_1T1R_8723B_F_CUT = 0x410E, - VERSION_TEST_CHIP_8188E = 0x0003, - VERSION_TEST_CHIP_8188E_I_CUT = 0x8003, - VERSION_NORMAL_CHIP_8188E = 0x000b, - VERSION_NORMAL_CHIP_8188E_I_CUT = 0x800b, - VERSION_TEST_CHIP_1T1R_8814 = 0x0007, - VERSION_NORMAL_CHIP_1T1R_8814 = 0x000f, - VERSION_TEST_CHIP_3T3R_8814 = 0x0037, - VERSION_NORMAL_CHIP_3T3R_8814 = 0x003f, - VERSION_NORMAL_CHIP_3T3R_8814_B_CUT = 0x103f, - - // New format used since 8703B - /* 8821B series */ - VERSION_NORMAL_TSMC_CHIP_1T1R_8821B = 0x00010009, - VERSION_NORMAL_SMIC_CHIP_1T1R_8821B = 0x00011009, - VERSION_NORMAL_UMC_CHIP_1T1R_8821B = 0x00012009, - - /* 8822B series */ - VERSION_NORMAL_SMIC_CHIP_1T1R_8822B = 0x0001100A, - VERSION_NORMAL_SMIC_CHIP_2T2R_8822B = 0x0001100A, - - /* 8703B series */ - VERSION_NORMAL_SMIC_CHIP_1T1R_8703B = 0x0001200B, - VERSION_NORMAL_SMIC_CHIP_1T1R_8188F = 0x0001200B, - /* 8723D series */ - VERSION_NORMAL_SMIC_CHIP_1T1R_8723D = 0x0001100D, - -}VERSION_8192C,*PVERSION_8192C; - -typedef enum _VERSION_CVID{ - VERSION_1_BEFORE_8703B, - VERSION_2_SINCE_8703B, -}VERSION_CVID, *PVERSION_CVID; - -#define CHANNEL_MAX_NUMBER 14+24+21 // 14 + 24 + 14 + 7 -#define CHANNEL_MAX_NUMBER_2G 14 -#define CHANNEL_MAX_NUMBER_5G 49 // 28 + 14 + 7 = 49 -#define CHANNEL_MAX_NUMBER_5G_80M 7 -#define CHANNEL_GROUP_MAX 3+9 // ch1~3, ch4~9, ch10~14 total three groups -#define MAX_PG_GROUP 13 - -//========================================= - -VOID -HAL_CmnInitPGData( - IN PADAPTER Adapter - ); - -VOID -HAL_DiffTXDummyLen( - IN PADAPTER Adapter -); - -VOID -HAL_DiffTXRXLen( - IN PADAPTER Adapter -); - -VOID -HAL_ReadTypeIDbyEfuse( - IN PADAPTER Adapter - ); - -RT_STATUS -HAL_ReadTypeID( - IN PADAPTER Adapter - ); - - -VOID -HAL_SetInterfaceIndex( - IN PADAPTER Adapter, - IN u1Byte InterfaceIdx - ); - -VOID -HAL_TxAggregation( - IN PADAPTER Adapter, - IN u1Byte queueId -); - - -VOID -HAL_HiddenSSIDHandleBeforeScan( - IN PADAPTER Adapter -); - -VOID -HAL_SetCorrentChannelAndWirelessModeBeforeScan( - IN PADAPTER Adapter -); - -BOOLEAN -HAL_SwitchTo20MHzBeforeScan( - IN PADAPTER Adapter -); - - -VOID -HAL_ChannelAndBandWidthRecoveryAfterScan( - IN PADAPTER Adapter -); - -u1Byte -MptToMgntRate( - IN ULONG MptRateIdx -); - -BOOLEAN -HAL_IsLegalChannel( - IN PADAPTER pAdapter, - IN u4Byte Channel - ); -BOOLEAN -HAL_Support_BW_Advancesetting( - IN PADAPTER Adapter - ); -VOID -HAL_SetTxPowerForAllRate( - IN PADAPTER Adapter, - IN ULONG ulTxPowerData - ); - -VOID -HAL_ReadCloudKey_Ex( - IN PADAPTER Adapter, - IN u1Byte Length, - IN u1Byte offset, - OUT u1Byte *pCloudKey - ); -VOID -HAL_BitMaskWrite1Byte( - IN PADAPTER Adapter, - IN u4Byte regAddr, - IN u1Byte bitMask, - IN u1Byte data - ); -VOID -HAL_BitMaskWrite2Byte( - IN PADAPTER Adapter, - IN u4Byte regAddr, - IN u2Byte bitMask, - IN u2Byte data - ); -VOID -HAL_BitMaskWrite4Byte( - IN PADAPTER Adapter, - IN u4Byte regAddr, - IN u4Byte bitMask, - IN u4Byte data - ); - -VOID -HAL_GetHwId( - IN PADAPTER Adapter, - IN pu2Byte pVid, - IN pu2Byte pDid, - IN pu2Byte pSvid, - IN pu2Byte pSmid - ); - -VOID -HAL_GetRegulation( - IN PADAPTER Adapter, - IN pu1Byte pRegulation24G, - IN pu1Byte pRegulation5G - ); - -BOOLEAN -HAL_RegPollAndWait( - IN PADAPTER Adapter, - IN u1Byte pollType, - IN u4Byte timeoutVal, // unit: ms - IN u4Byte regAddr, - IN u4Byte equValue, - IN u4Byte bitMask - ); - -BOOLEAN -HAL_IsTxOwnBitFramework( - IN PADAPTER Adapter - ); - -BOOLEAN -HAL_IsOld8051Series( - IN PADAPTER Adapter - ); - -VOID -EXhalcommon_CheckHang( - IN PADAPTER Adapter - ); -VOID -EXhalcommon_CheckEDCCA( - IN PADAPTER Adapter - ); -u4Byte -EXhalcommon_GetFalseAlmCnt( - IN PADAPTER Adapter, - IN u1Byte type - ); -s4Byte -EXhalcommon_GetWifiRssi( - IN PADAPTER Adapter - ); -u4Byte -EXhalcommon_GetH2cStatistics( - IN PADAPTER Adapter, - IN u1Byte index - ); -u4Byte -EXhalcommon_GetOdmAbility( - IN PADAPTER Adapter - ); -VOID -DropPacketWorkitemCallback( - IN PVOID Context - ); -VOID -ResumeTxBeacon_92C( - IN PADAPTER Adapter - ); - -// -// Runtime D3 related function handler, added by Roger, 2013.02.05. -// -#if INTEL_RTD3_SUPPORT - -VOID -HalRuntimeD3Enter( - PADAPTER Adapter - ); - -VOID -HalRuntimeD3Leave( - PADAPTER Adapter - ); - -#endif - -VOID -HAL_8051Reset( - IN PADAPTER Adapter - ); - -VOID -HAL_8051PauseIOWrapper( - IN PADAPTER Adapter -); - -VOID -HAL_8051EnableIOWrapper( - IN PADAPTER Adapter -); - -u1Byte -HAL_GetSDRPErrorHandlingType( - IN PADAPTER pAdapter, - IN u4Byte SdioCmdAddr -); - -VOID -HAL_SetWoWLANCAMEntry( - IN PADAPTER Adapter - ); - -VOID -HAL_ClearGPIOWakeHost( - IN PADAPTER Adapter - ); - -typedef struct _Path_Diversity_ -{ - //Path Diversity - u4Byte OFDMTXPath; - u4Byte CCKTXPath; - u1Byte DefaultRespPath; - u1Byte OFDMDefaultRespPath; - u1Byte CCKDefaultRespPath; - u1Byte TrainingPath; - u1Byte TrainingState; - s4Byte RSSI_CCK_Path[2]; - s4Byte RSSI_CCK_Path_cnt[2]; - u4Byte OFDM_Pkt_Cnt; - u4Byte CCK_Pkt_Cnt; - u1Byte Timer; - u1Byte PathDiv_NoLink_State; - u1Byte CCKPathDivEnable; - -}PD_T, *pPD_T; - - -//------------------------------------------------------------------------ -// Temp H2C cmd functions for common -// These prototypes should be removed after H2C cmd functions are integrated. -//------------------------------------------------------------------------ -VOID -HAL_H2CSetFwGlobalInfoCmd( - IN PADAPTER Adapter - ); - -VOID -HAL_H2CSetFWWoWlanMode( - IN PADAPTER Adapter, - IN BOOLEAN bFuncEn - ); - -VOID -HAL_H2CSetFwKeepAliveCmd( - IN PADAPTER Adapter, - IN BOOLEAN bFuncEn - ); - -VOID -HAL_H2CSetFwDisconnectDecisionCtrlCmd( - IN PADAPTER Adapter, - IN BOOLEAN bFuncEn - ); - -VOID -HAL_H2CSetFwScanOffloadCtrlCmd( - IN PADAPTER Adapter, - IN u1Byte Type, - IN u1Byte ScanOffloadEnable, - IN u1Byte NLOEnable - ); - -VOID -HAL_H2CSetFwRemoteWakeCtrlCmd( - IN PADAPTER Adapter, - IN u1Byte Enable - ); - -VOID -HAL_H2CSetFwInactivePSCmd( - IN PADAPTER Adapter, - IN u1Byte Enable, - IN BOOLEAN bActiveWakeUp, - IN BOOLEAN bForceClkOff - ); - -VOID -Hal_InitVars( - IN PADAPTER Adapter -); - -VOID -Hal_InitCamEntry( - IN PADAPTER Adapter -); - -u1Byte -HAL_QueryBeamformerCap( - IN PADAPTER Adapter -); - -u1Byte -HAL_QueryBeamformeeCap( - IN PADAPTER Adapter -); - -VOID -HAL_DumpHwAllRegisters( - IN PADAPTER Adapter - ); - -VOID -Hal_SetRsvdCtrl( - IN PADAPTER pAdapter, - IN u4Byte BitMap - ); - -VOID -Hal_ClearRsvdCtrl( - IN PADAPTER pAdapter, - IN u4Byte BitMap - ); - -typedef struct _HW_REG_DEFINE{ - u4Byte regOffset; - u4Byte byteNum; -} HW_REG_DEFINE, *PHW_REG_DEFINE; - -typedef struct _HW_REG_PREACTION{ - u4Byte writeRegOffset; - u4Byte byteNum; - u4Byte bitMask; - u4Byte value; - u4Byte delayMs; - BOOLEAN bRestore; - u4Byte originalValue; -} HW_REG_PREACTION, *PHW_REG_PREACTION; - -typedef struct _HW_REG_VALUE{ - u4Byte regOffset; - u4Byte byteNum; - u4Byte regValue; -} HW_REG_VALUE, *PHW_REG_VALUE; - -#endif // #ifndef __INC_HALDEF_H |