Samples update for public Windows 10 release

Fix #2 Enabling WPP Recorder in Sensors Samples causes errors
Fix #4 Add back fixed KMDOD sample
Add new BarcodeScanner sample in pos folder
Add new MagneticStripeReader sample in pos folder
Add new SynpaticsTouch sample in input folder
Add new Power Engine Plugin sample in pofx folder
Add new DeviceMft sample in avstream folder
Add new AvsCamera sample in root
Add new SimBatt sample in root
Add other pre-existing samples not yet released for Win10

1 files changed, 57 insertions, 0 deletions

diff --git a/wpd/WpdBasicHardwareDriver/firmware/ping_wpd_enabled.bs2 b/wpd/WpdBasicHardwareDriver/firmware/ping_wpd_enabled.bs2
new file mode 100644
index 00000000..e2af29a7
--- /dev/null
+++ b/wpd/WpdBasicHardwareDriver/firmware/ping_wpd_enabled.bs2
@@ -0,0 +1,57 @@
+' Ping_wpd_enabled.bs2
+'
+' Measure distance with Ping))) sensor and display in both in & cm
+'
+' THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
+' ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
+' THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
+' PARTICULAR PURPOSE.
+'
+' Copyright (c) Microsoft Corporation. All rights reserved
+'
+' {$STAMP BS2}
+' {$PBASIC 2.5}
+' =========================================================================
+
+' Conversion constants for room temperature measurements.
+CmConstant CON 2260
+cmDistance VAR Word
+time VAR Word
+SensorID  VAR   Byte  'Sensor identifier = 5 for PIR
+ElementSize VAR Byte  'Size (in bytes) of each element
+ElementCount  VAR   Byte  'Count of elements in packet
+Padding VAR Byte      'Padding for the 8-byte element
+
+SensorID = 4
+ElementSize = 1
+ElementCount = 5      '4-bytes for pressure data; 5 for interval
+
+NewInterval VAR  Word  'New interval requested by user
+Interval  VAR   Word  'Interval value utlized by firmware
+
+
+LFD       CON $10      'Linefeed character
+
+Interval = 200        '.20 of a second interval
+NewInterval = 200
+
+Main:
+  GOSUB PollSensor                  'Was motion detected?
+  GOSUB RetrieveInterval            'Retrieve units data
+
+Timeout:
+  SEROUT 16, 16468, [DEC1 SensorID, DEC1 ElementSize, DEC1 ElementCount, DEC5 cmDistance, DEC5 Interval,LFD]
+GOTO Main
+
+PollSensor:
+  PULSOUT 0, 5
+  PULSIN 0, 1, time
+  cmDistance = cmConstant ** time
+RETURN
+
+RetrieveInterval:
+    SERIN 16, 16468, Interval, Timeout, [DEC NewInterval]   'Retrieve interval
+    IF NewInterval >= 10 AND NewInterval <= 60000 THEN
+      Interval = NewInterval
+    ENDIF
+RETURN
\ No newline at end of file