path: root/xmake/plugins/project/vstudio/impl/vs201x_vcxproj.lua

--!A cross-platform build utility based on Lua
--
-- Licensed under the Apache License, Version 2.0 (the "License");
-- you may not use this file except in compliance with the License.
-- You may obtain a copy of the License at
--
--     http://www.apache.org/licenses/LICENSE-2.0
--
-- Unless required by applicable law or agreed to in writing, software
-- distributed under the License is distributed on an "AS IS" BASIS,
-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-- See the License for the specific language governing permissions and
-- limitations under the License.
--
-- Copyright (C) 2015-present, TBOOX Open Source Group.
--
-- @author      ruki
-- @file        vs201x_vcxproj.lua
--

-- imports
import("core.project.config")
import("core.language.language")
import("vsfile")

-- get toolset version
function _get_toolset_ver(targetinfo, vsinfo)

    -- get toolset version from vs version
    local toolset_ver = nil
    local vs_toolset = config.get("vs_toolset")
    if vs_toolset then
        local verinfo = vs_toolset:split('%.')
        toolset_ver = "v" .. verinfo[1] .. (verinfo[2] or "0")
    end
    if not toolset_ver then
        toolset_ver = vsinfo.toolset_version
    end
    return toolset_ver
end

-- get platform sdk version from vcvars.WindowsSDKVersion
function _get_platform_sdkver(target, vsinfo)
    local sdkver = nil
    for _, targetinfo in ipairs(target.info) do
        sdkver = targetinfo.sdkver
        if sdkver then
            break
        end
    end
    return sdkver or vsinfo.sdk_version
end

-- make compiling command
function _make_compcmd(compargv, sourcefile, objectfile, vcxprojdir)
    local argv = {}
    for i, v in ipairs(compargv) do
        if i == 1 then
            v = path.filename(v) -- C:\xxx\ml.exe -> ml.exe
        end
        v = v:gsub("__sourcefile__", sourcefile)
        v = v:gsub("__objectfile__", objectfile)
        -- -Idir or /Idir
        v = v:gsub("([%-/]I)(.*)", function (I, dir)
                dir = dir:trim()
                if #dir == 0 then
                    return ""
                end
                dir = path.translate(dir)
                if not path.is_absolute(dir) then
                    dir = path.relative(path.absolute(dir), vcxprojdir)
                end
                return I .. dir
            end)
        table.insert(argv, v)
    end
    return table.concat(argv, " ")
end

-- make compiling flags
function _make_compflags(sourcefile, targetinfo, vcxprojdir)

    -- translate path for -Idir or /Idir
    local flags = {}
    for _, flag in ipairs(targetinfo.compflags[sourcefile]) do

        -- -Idir or /Idir
        flag = flag:gsub("[%-/]I(.*)", function (dir)
                        dir = dir:trim()
                        if #dir == 0 then
                            return ""
                        end
                        dir = path.translate(dir)
                        if not path.is_absolute(dir) then
                            dir = path.relative(path.absolute(dir), vcxprojdir)
                        end
                        return "/I" .. dir
                    end)

        -- save flag
        table.insert(flags, flag)
    end

    -- add -D__config_$(mode)__ and -D__config_$(arch)__ for the config header
    table.insert(flags, "-D__config_" .. targetinfo.mode .. "__")
    table.insert(flags, "-D__config_" .. targetinfo.arch .. "__")

    -- ok?
    return flags
end

-- make linking flags
function _make_linkflags(targetinfo, vcxprojdir)

    -- replace -libpath:dir or /libpath:dir
    local flags = {}
    for _, flag in ipairs(targetinfo.linkflags) do

        -- replace -libpath:dir or /libpath:dir
        flag = flag:gsub(string.ipattern("[%-/]libpath:(.*)"), function (dir)
                        dir = dir:trim()
                        if #dir == 0 then
                            return ""
                        end
                        dir = path.translate(dir)
                        if not path.is_absolute(dir) then
                            dir = path.relative(path.absolute(dir), vcxprojdir)
                        end
                        return "/libpath:" .. dir
                    end)

        -- replace -def:dir or /def:dir
        flag = flag:gsub(string.ipattern("[%-/]def:(.*)"), function (dir)
                        dir = dir:trim()
                        if #dir == 0 then
                            return ""
                        end
                        dir = path.translate(dir)
                        if not path.is_absolute(dir) then
                            dir = path.relative(path.absolute(dir), vcxprojdir)
                        end
                        return "/def:" .. dir
                    end)

        -- save flag
        table.insert(flags, flag)
    end

    -- ok?
    return flags
end

-- make header
function _make_header(vcxprojfile, vsinfo)

    -- make header
    vcxprojfile:print("<?xml version=\"1.0\" encoding=\"utf-8\"?>")
    vcxprojfile:enter("<Project DefaultTargets=\"Build\" ToolsVersion=\"%s.0\" xmlns=\"http://schemas.microsoft.com/developer/msbuild/2003\">", assert(vsinfo.project_version))
end

-- make tailer
function _make_tailer(vcxprojfile, vsinfo)
    vcxprojfile:print("<Import Project=\"%$(VCTargetsPath)\\Microsoft.Cpp.targets\" />")
    vcxprojfile:enter("<ImportGroup Label=\"ExtensionTargets\">")
    vcxprojfile:leave("</ImportGroup>")
    vcxprojfile:leave("</Project>")
end

-- make Configurations
function _make_configurations(vcxprojfile, vsinfo, target, vcxprojdir)

    -- the target name
    local targetname = target.name

    -- init configuration type
    local configuration_types =
    {
        binary = "Application"
    ,   shared = "DynamicLibrary"
    ,   static = "StaticLibrary"
    }

    -- make ProjectConfigurations
    vcxprojfile:enter("<ItemGroup Label=\"ProjectConfigurations\">")
    for _, targetinfo in ipairs(target.info) do
        vcxprojfile:enter("<ProjectConfiguration Include=\"%s|%s\">", targetinfo.mode, targetinfo.arch)
            vcxprojfile:print("<Configuration>%s</Configuration>", targetinfo.mode)
            vcxprojfile:print("<Platform>%s</Platform>", targetinfo.arch)
        vcxprojfile:leave("</ProjectConfiguration>")
    end
    vcxprojfile:leave("</ItemGroup>")

    -- make Globals
    vcxprojfile:enter("<PropertyGroup Label=\"Globals\">")
        vcxprojfile:print("<ProjectGuid>{%s}</ProjectGuid>", hash.uuid4(targetname))
        vcxprojfile:print("<RootNamespace>%s</RootNamespace>", targetname)
        if vsinfo.vstudio_version >= "2015" then
            vcxprojfile:print("<WindowsTargetPlatformVersion>%s</WindowsTargetPlatformVersion>", _get_platform_sdkver(target, vsinfo))
        end
    vcxprojfile:leave("</PropertyGroup>")

    -- import Microsoft.Cpp.Default.props
    vcxprojfile:print("<Import Project=\"%$(VCTargetsPath)\\Microsoft.Cpp.Default.props\" />")

    -- make Configuration
    for _, targetinfo in ipairs(target.info) do
        vcxprojfile:enter("<PropertyGroup Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\" Label=\"Configuration\">", targetinfo.mode, targetinfo.arch)
            vcxprojfile:print("<ConfigurationType>%s</ConfigurationType>", assert(configuration_types[target.kind]))
            vcxprojfile:print("<PlatformToolset>%s</PlatformToolset>", _get_toolset_ver(targetinfo, vsinfo))
            vcxprojfile:print("<CharacterSet>%s</CharacterSet>", targetinfo.unicode and "Unicode" or "MultiByte")
            if targetinfo.usemfc then
                vcxprojfile:print("<UseOfMfc>%s</UseOfMfc>", targetinfo.usemfc)
            end
        vcxprojfile:leave("</PropertyGroup>")
    end

    -- import Microsoft.Cpp.props
    vcxprojfile:print("<Import Project=\"%$(VCTargetsPath)\\Microsoft.Cpp.props\" />")

    -- make ExtensionSettings
    vcxprojfile:enter("<ImportGroup Label=\"ExtensionSettings\">")
    vcxprojfile:leave("</ImportGroup>")

    -- make PropertySheets
    for _, targetinfo in ipairs(target.info) do
        vcxprojfile:enter("<ImportGroup Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\" Label=\"PropertySheets\">", targetinfo.mode, targetinfo.arch)
            vcxprojfile:print("<Import Project=\"%$(UserRootDir)\\Microsoft.Cpp.%$(Platform).user.props\" Condition=\"exists(\'%$(UserRootDir)\\Microsoft.Cpp.%$(Platform).user.props\')\" Label=\"LocalAppDataPlatform\" />")
        vcxprojfile:leave("</ImportGroup>")
    end

    -- make UserMacros
    vcxprojfile:print("<PropertyGroup Label=\"UserMacros\" />")

    -- make OutputDirectory and IntermediateDirectory
    for _, targetinfo in ipairs(target.info) do
        vcxprojfile:enter("<PropertyGroup Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\">", targetinfo.mode, targetinfo.arch)
            vcxprojfile:print("<OutDir>%s\\</OutDir>", path.relative(path.absolute(targetinfo.targetdir), vcxprojdir))
            vcxprojfile:print("<IntDir>%s\\</IntDir>", path.relative(path.absolute(targetinfo.objectdir), vcxprojdir))
            vcxprojfile:print("<TargetName>%s</TargetName>", path.basename(targetinfo.targetfile))
            vcxprojfile:print("<TargetExt>%s</TargetExt>", path.extension(targetinfo.targetfile))

            if target.kind == "binary" then
                vcxprojfile:print("<LinkIncremental>true</LinkIncremental>")
            end
        vcxprojfile:leave("</PropertyGroup>")
    end
end

-- make source options
function _make_source_options(vcxprojfile, flags, condition)

    -- exists condition?
    condition = condition or ""

    -- get flags string
    local flagstr = os.args(flags)

    -- make Optimization
    if flagstr:find("[%-/]Os") or flagstr:find("[%-/]O1") then
        vcxprojfile:print("<Optimization%s>MinSpace</Optimization>", condition)
    elseif flagstr:find("[%-/]O2") or flagstr:find("[%-/]Ot") then
        vcxprojfile:print("<Optimization%s>MaxSpeed</Optimization>", condition)
    elseif flagstr:find("[%-/]Ox") then
        vcxprojfile:print("<Optimization%s>Full</Optimization>", condition)
    else
        vcxprojfile:print("<Optimization%s>Disabled</Optimization>", condition)
    end

    -- make FloatingPointModel
    if flagstr:find("[%-/]fp:fast") then
        vcxprojfile:print("<FloatingPointModel%s>Fast</FloatingPointModel>", condition)
    elseif flagstr:find("[%-/]fp:strict") then
        vcxprojfile:print("<FloatingPointModel%s>Strict</FloatingPointModel>", condition)
    elseif flagstr:find("[%-/]fp:precise") then
        vcxprojfile:print("<FloatingPointModel%s>Precise</FloatingPointModel>", condition)
    end

    -- make WarningLevel
    if flagstr:find("[%-/]W1") then
        vcxprojfile:print("<WarningLevel%s>Level1</WarningLevel>", condition)
    elseif flagstr:find("[%-/]W2") then
        vcxprojfile:print("<WarningLevel%s>Level2</WarningLevel>", condition)
    elseif flagstr:find("[%-/]W3") then
        vcxprojfile:print("<WarningLevel%s>Level3</WarningLevel>", condition)
    elseif flagstr:find("[%-/]Wall") then
        vcxprojfile:print("<WarningLevel%s>EnableAllWarnings</WarningLevel>", condition)
    else
        vcxprojfile:print("<WarningLevel%s>TurnOffAllWarnings</WarningLevel>", condition)
    end
    if flagstr:find("[%-/]WX") then
        vcxprojfile:print("<TreatWarningAsError%s>true</TreatWarningAsError>", condition)
    end

    -- make PreprocessorDefinitions
    local defstr = ""
    for _, flag in ipairs(flags) do
        flag:gsub("[%-/]D(.*)",
            function (def)
                defstr = defstr .. def .. ";"
            end
        )
    end
    defstr = defstr .. "%%(PreprocessorDefinitions)"
    vcxprojfile:print("<PreprocessorDefinitions%s>%s</PreprocessorDefinitions>", condition, defstr)

    -- make DebugInformationFormat
    if flagstr:find("[%-/]Zi") then
        vcxprojfile:print("<DebugInformationFormat%s>ProgramDatabase</DebugInformationFormat>", condition)
    elseif flagstr:find("[%-/]ZI") then
        vcxprojfile:print("<DebugInformationFormat%s>EditAndContinue</DebugInformationFormat>", condition)
    elseif flagstr:find("[%-/]Z7") then
        vcxprojfile:print("<DebugInformationFormat%s>OldStyle</DebugInformationFormat>", condition)
    else
        vcxprojfile:print("<DebugInformationFormat%s>None</DebugInformationFormat>", condition)
    end

    -- make RuntimeLibrary
    if flagstr:find("[%-/]MDd") then
        vcxprojfile:print("<RuntimeLibrary%s>MultiThreadedDebugDLL</RuntimeLibrary>", condition)
    elseif flagstr:find("[%-/]MD") then
        vcxprojfile:print("<RuntimeLibrary%s>MultiThreadedDLL</RuntimeLibrary>", condition)
    elseif flagstr:find("[%-/]MTd") then
        vcxprojfile:print("<RuntimeLibrary%s>MultiThreadedDebug</RuntimeLibrary>", condition)
    else
        vcxprojfile:print("<RuntimeLibrary%s>MultiThreaded</RuntimeLibrary>", condition)
    end

    -- handle multi processor compilation
    if flagstr:find("[%-/]Gm-") or not flagstr:find("[%-/]Gm") then
        vcxprojfile:print("<MinimalRebuild%s>false</MinimalRebuild>", condition)
        if flagstr:find("[%-/]MP") then
            vcxprojfile:print("<MultiProcessorCompilation%s>true</MultiProcessorCompilation>", condition)
        end
    end

    -- make AdditionalIncludeDirectories
    if flagstr:find("[%-/]I") then
        local dirs = {}
        for _, flag in ipairs(flags) do
            flag:gsub("[%-/]I(.*)", function (dir) table.insert(dirs, dir) end)
        end
        if #dirs > 0 then
            vcxprojfile:print("<AdditionalIncludeDirectories%s>%s</AdditionalIncludeDirectories>", condition, table.concat(dirs, ";"))
        end
    end

    -- compile as c++ if exists flag: /TP
    if flagstr:find("[%-/]TP") then
        vcxprojfile:print("<CompileAs%s>CompileAsCpp</CompileAs>", condition)
    end

    -- make AdditionalOptions
    local additional_flags = {}
    local excludes = {"Od", "Os", "O0", "O1", "O2", "Ot", "Ox", "W0", "W1", "W2", "W3", "WX", "Wall", "Zi", "ZI", "Z7", "MT", "MTd", "MD", "MDd", "TP", "Fd", "fp", "I", "D", "Gm-", "Gm"}
    for _, flag in ipairs(flags) do
        local excluded = false
        for _, exclude in ipairs(excludes) do
            if flag:find("[%-/]" .. exclude) then
                excluded = true
                break
            end
        end
        if not excluded then
            table.insert(additional_flags, flag)
        end
    end
    if #additional_flags > 0 then
        vcxprojfile:print("<AdditionalOptions%s>%s %%(AdditionalOptions)</AdditionalOptions>", condition, os.args(additional_flags))
    end
end

-- make common item
function _make_common_item(vcxprojfile, vsinfo, target, targetinfo, vcxprojdir)

    -- enter ItemDefinitionGroup
    vcxprojfile:enter("<ItemDefinitionGroup Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\">", targetinfo.mode, targetinfo.arch)

    -- init the linker kinds
    local linkerkinds =
    {
        binary = "Link"
    ,   static = "Lib"
    ,   shared = "Link"
    }

    -- for linker?
    vcxprojfile:enter("<%s>", linkerkinds[targetinfo.targetkind])

        -- save subsystem
        local subsystem = "Console"

        -- make linker flags
        local flags = {}
        for _, flag in ipairs(_make_linkflags(targetinfo, vcxprojdir)) do

            local flag_lower = flag:lower()

            -- remove "-subsystem:windows"
            if flag_lower:find("[%-/]subsystem:windows") then
                subsystem = "Windows"
            -- remove "-machine:[x86|x64]", "-pdb:*.pdb" and "-debug"
            elseif not flag_lower:find("[%-/]machine:%w+") and not flag_lower:find("[%-/]pdb:.+%.pdb") and not flag_lower:find("[%-/]debug") then
                table.insert(flags, flag)
            end
        end
        flags = os.args(flags)

        -- make AdditionalOptions
        vcxprojfile:print("<AdditionalOptions>%s %%(AdditionalOptions)</AdditionalOptions>", flags)

        -- generate debug infomation?
        if linkerkinds[targetinfo.targetkind] == "Link" then

            -- enable debug infomation?
            local debug = false
            for _, symbol in ipairs(targetinfo.symbols) do
                if symbol == "debug" then
                    debug = true
                    break
                end
            end
            vcxprojfile:print("<GenerateDebugInformation>%s</GenerateDebugInformation>", tostring(debug))
        end

        -- make SubSystem
        if targetinfo.targetkind == "binary" then
            vcxprojfile:print("<SubSystem>%s</SubSystem>", subsystem)
        end

        -- make TargetMachine
        vcxprojfile:print("<TargetMachine>%s</TargetMachine>", (targetinfo.arch == "x64" and "MachineX64" or "MachineX86"))


    vcxprojfile:leave("</%s>", linkerkinds[targetinfo.targetkind])

    -- for compiler?
    vcxprojfile:enter("<ClCompile>")

        -- make source options
        _make_source_options(vcxprojfile, targetinfo.commonflags)


        -- use c or c++ precompiled header
        local pcheader = target.pcxxheader or target.pcheader
        if pcheader then

            -- make precompiled header and outputfile
            vcxprojfile:print("<PrecompiledHeader>Use</PrecompiledHeader>")
            vcxprojfile:print("<PrecompiledHeaderFile>%s</PrecompiledHeaderFile>", path.filename(pcheader))
            local pcoutputfile = targetinfo.pcxxoutputfile or targetinfo.pcoutputfile
            if pcoutputfile then
                vcxprojfile:print("<PrecompiledHeaderOutputFile>%s</PrecompiledHeaderOutputFile>", path.relative(path.absolute(pcoutputfile), vcxprojdir))
            end
            vcxprojfile:print("<ForcedIncludeFiles>%s;%%(ForcedIncludeFiles)</ForcedIncludeFiles>", path.filename(pcheader))
        end

    vcxprojfile:leave("</ClCompile>")

    -- leave ItemDefinitionGroup
    vcxprojfile:leave("</ItemDefinitionGroup>")
end

-- make common items
function _make_common_items(vcxprojfile, vsinfo, target, vcxprojdir)

    -- for each mode and arch
    for _, targetinfo in ipairs(target.info) do

        -- make source flags
        local flags_stats = {}
        local files_count = 0
        local first_flags = nil
        targetinfo.sourceflags = {}
        for _, sourcebatch in pairs(targetinfo.sourcebatches) do
            local sourcekind = sourcebatch.sourcekind
            if (sourcekind == "cc" or sourcekind == "cxx" or sourcekind == "as" or sourcekind == "mrc") then
                for _, sourcefile in ipairs(sourcebatch.sourcefiles) do

                    -- make compiler flags
                    local flags = _make_compflags(sourcefile, targetinfo, vcxprojdir)

                    -- no common flags for asm
                    if sourcekind ~= "as" then
                        for _, flag in ipairs(flags) do
                            flags_stats[flag] = (flags_stats[flag] or 0) + 1
                        end

                        -- update files count
                        files_count = files_count + 1

                        -- save first flags
                        if first_flags == nil then
                            first_flags = flags
                        end
                    end

                    -- save source flags
                    targetinfo.sourceflags[sourcefile] = flags
                end
            end
        end

        -- make common flags
        targetinfo.commonflags = {}
        for _, flag in ipairs(first_flags) do
            if flags_stats[flag] == files_count then
                table.insert(targetinfo.commonflags, flag)
            end
        end

        -- remove common flags from source flags
        local sourceflags = {}
        for sourcefile, flags in pairs(targetinfo.sourceflags) do
            local otherflags = {}
            for _, flag in ipairs(flags) do
                if flags_stats[flag] ~= files_count then
                    table.insert(otherflags, flag)
                end
            end
            sourceflags[sourcefile] = otherflags
        end
        targetinfo.sourceflags = sourceflags

        -- make common item
        _make_common_item(vcxprojfile, vsinfo, target, targetinfo, vcxprojdir)
    end
end

-- make header file
function _make_header_file(vcxprojfile, includefile, vcxprojdir)
    vcxprojfile:print("<ClInclude Include=\"%s\" />", path.relative(path.absolute(includefile), vcxprojdir))
end

-- make source file for all modes
function _make_source_file_forall(vcxprojfile, vsinfo, target, sourcefile, sourceinfo, vcxprojdir)

    -- get object file and source kind
    local sourcekind = nil
    for _, info in ipairs(sourceinfo) do
        sourcekind = info.sourcekind
        break
    end

    -- enter it
    local nodename = (sourcekind == "as" and "CustomBuild" or (sourcekind == "mrc" and "ResourceCompile" or "ClCompile"))
    sourcefile = path.relative(path.absolute(sourcefile), vcxprojdir)
    vcxprojfile:enter("<%s Include=\"%s\">", nodename, sourcefile)

        -- for *.asm files
        if sourcekind == "as" then
            vcxprojfile:print("<ExcludedFromBuild>false</ExcludedFromBuild>")
            vcxprojfile:print("<FileType>Document</FileType>")
            for _, info in ipairs(sourceinfo) do
                local objectfile = path.relative(path.absolute(info.objectfile), vcxprojdir)
                local compcmd = _make_compcmd(info.compargv, sourcefile, objectfile, vcxprojdir)
                vcxprojfile:print("<Outputs Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s\'\">%s</Outputs>", info.mode .. '|' .. info.arch, objectfile)
                vcxprojfile:print("<Command Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s\'\">%s</Command>", info.mode .. '|' .. info.arch, compcmd)
            end
            vcxprojfile:print("<Message>%s</Message>", path.filename(sourcefile))

        -- for *.rc files
        elseif sourcekind == "mrc" then
            for _, info in ipairs(sourceinfo) do
                local objectfile = path.relative(path.absolute(info.objectfile), vcxprojdir)
                vcxprojfile:print("<ResourceOutputFileName Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\">%s</ResourceOutputFileName>", info.mode, info.arch, objectfile)
            end

        -- for *.c/cpp files
        else

            -- init items
            local items =
            {
                AdditionalOptions =
                {
                    key = function (info) return os.args(info.flags) end
                ,   value = function (key) return key .. " %%(AdditionalOptions)" end
                }
            }

            -- make items
            for itemname, iteminfo in pairs(items) do

                -- make merge keys
                local mergekeys  = {}
                for _, info in ipairs(sourceinfo) do
                    local key = iteminfo.key(info)
                    mergekeys[key] = mergekeys[key] or {}
                    mergekeys[key][info.mode .. '|' .. info.arch] = true
                end
                for key, mergeinfos in pairs(mergekeys) do

                    -- merge mode and arch first
                    local count = 0
                    for _, mode in ipairs(vsinfo.modes) do
                        if mergeinfos[mode .. "|Win32"] and mergeinfos[mode .. "|x64"] then
                            mergeinfos[mode .. "|Win32"] = nil
                            mergeinfos[mode .. "|x64"]   = nil
                            mergeinfos[mode]             = true
                        end
                        if mergeinfos[mode] then
                            count = count + 1
                        end
                    end

                    -- disable the precompiled header if sourcekind ~= headerkind
                    local pcheader = target.pcxxheader or target.pcheader
                    local pcheader_disable = false
                    if pcheader and language.sourcekind_of(sourcefile) ~= (target.pcxxheader and "cxx" or "cc") then
                        pcheader_disable = true
                    end

                    -- all modes and archs exist?
                    if count == #vsinfo.modes then
                        if #key > 0 then
                            vcxprojfile:print("<%s>%s</%s>", itemname, iteminfo.value(key), itemname)
                            if pcheader_disable then
                                vcxprojfile:print("<PrecompiledHeader>NotUsing</PrecompiledHeader>")
                            end
                        end
                    else
                        for cond, _ in pairs(mergeinfos) do
                            if cond:find('|', 1, true) then
                                -- for mode | arch
                                if #key > 0 then
                                    vcxprojfile:print("<%s Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s\'\">%s</%s>", itemname, cond, iteminfo.value(key), itemname)
                                    if pcheader_disable then
                                        vcxprojfile:print("<PrecompiledHeader Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s\'\">NotUsing</PrecompiledHeader>", cond)
                                    end
                                end
                            else
                                -- only for mode
                                if #key > 0 then
                                    vcxprojfile:print("<%s Condition=\"\'%$(Configuration)\'==\'%s\'\">%s</%s>", itemname, cond, iteminfo.value(key), itemname)
                                    if pcheader_disable then
                                        vcxprojfile:print("<PrecompiledHeader Condition=\"\'%$(Configuration)\'==\'%s\'\">NotUsing</PrecompiledHeader>", cond)
                                    end
                                end
                            end
                        end
                    end
                end
            end
        end

    -- leave it
    vcxprojfile:leave("</%s>", nodename)
end

-- make source file for specific modes
function _make_source_file_forspec(vcxprojfile, vsinfo, target, sourcefile, sourceinfo, vcxprojdir)

    -- add source file
    sourcefile = path.relative(path.absolute(sourcefile), vcxprojdir)
    for _, info in ipairs(sourceinfo) do

        -- enter it
        local nodename = (info.sourcekind == "as" and "CustomBuild" or (info.sourcekind == "mrc" and "ResourceCompile" or "ClCompile"))
        vcxprojfile:enter("<%s Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\" Include=\"%s\">", nodename, info.mode, info.arch, sourcefile)

        -- for *.asm files
        local objectfile = path.relative(path.absolute(info.objectfile), vcxprojdir)
        if info.sourcekind == "as" then
            local compcmd = _make_compcmd(info.compargv, sourcefile, objectfile, vcxprojdir)
            vcxprojfile:print("<ExcludedFromBuild>false</ExcludedFromBuild>")
            vcxprojfile:print("<FileType>Document</FileType>")
            vcxprojfile:print("<Outputs>%s</Outputs>", objectfile)
            vcxprojfile:print("<Command>%s</Command>", compcmd)

        -- for *.rc files
        elseif sourcekind == "mrc" then
            vcxprojfile:print("<ResourceOutputFileName Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\">%s</ResourceOutputFileName>",info.mode,info.arch,objectfile)

        -- for *.c/cpp files
        else

            -- disable the precompiled header if sourcekind ~= headerkind
            local pcheader = target.pcxxheader or target.pcheader
            if pcheader and language.sourcekind_of(sourcefile) ~= (target.pcxxheader and "cxx" or "cc") then
                vcxprojfile:print("<PrecompiledHeader>NotUsing</PrecompiledHeader>")
            end
            vcxprojfile:print("<AdditionalOptions>%s %%(AdditionalOptions)</AdditionalOptions>", os.args(info.flags))
        end

        -- leave it
        vcxprojfile:leave("</%s>", nodename)
    end
end

-- make source file for precompiled header
function _make_source_file_forpch(vcxprojfile, vsinfo, target, vcxprojdir)

    -- add precompiled source file
    local pcheader = target.pcxxheader or target.pcheader
    if pcheader then
        local sourcefile = path.relative(path.absolute(pcheader), vcxprojdir)
        vcxprojfile:enter("<ClCompile Include=\"%s\">", sourcefile)
            vcxprojfile:print("<PrecompiledHeader>Create</PrecompiledHeader>")
            vcxprojfile:print("<PrecompiledHeaderFile></PrecompiledHeaderFile>")
            vcxprojfile:print("<AdditionalOptions> %%(AdditionalOptions)</AdditionalOptions>")
            for _, info in ipairs(target.info) do

                -- compile as c/c++
                local compileas = (target.pcxxheader and "CompileAsCpp" or "CompileAsC")
                vcxprojfile:print("<CompileAs Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\">%s</CompileAs>", info.mode, info.arch, compileas)

                -- add object file
                local pcoutputfile = info.pcxxoutputfile or info.pcoutputfile
                if pcoutputfile then
                    local objectfile = path.relative(path.absolute(pcoutputfile .. ".obj"), vcxprojdir)
                    vcxprojfile:print("<ObjectFileName Condition=\"\'%$(Configuration)|%$(Platform)\'==\'%s|%s\'\">%s</ObjectFileName>", info.mode, info.arch, objectfile)
                end
            end
        vcxprojfile:leave("</ClCompile>")
    end
end

-- make source files
function _make_source_files(vcxprojfile, vsinfo, target, vcxprojdir)

    -- add source files
    vcxprojfile:enter("<ItemGroup>")

        -- make source file infos
        local sourceinfos = {}
        for _, targetinfo in ipairs(target.info) do
            for _, sourcebatch in pairs(targetinfo.sourcebatches) do
                local sourcekind = sourcebatch.sourcekind
                if (sourcekind == "cc" or sourcekind == "cxx" or sourcekind == "as" or sourcekind == "mrc") then
                    local objectfiles = sourcebatch.objectfiles
                    for idx, sourcefile in ipairs(sourcebatch.sourcefiles) do
                        local objectfile    = objectfiles[idx]
                        local flags         = targetinfo.sourceflags[sourcefile]
                        sourceinfos[sourcefile] = sourceinfos[sourcefile] or {}
                        table.insert(sourceinfos[sourcefile], {mode = targetinfo.mode, arch = targetinfo.arch, sourcekind = sourcekind, objectfile = objectfile, flags = flags, compargv = targetinfo.compargvs[sourcefile]})
                    end
                end
            end
        end

        -- make source files
        for sourcefile, sourceinfo in pairs(sourceinfos) do
            if #sourceinfo == #target.info then
                _make_source_file_forall(vcxprojfile, vsinfo, target, sourcefile, sourceinfo, vcxprojdir)
            else
                _make_source_file_forspec(vcxprojfile, vsinfo, target, sourcefile, sourceinfo, vcxprojdir)
            end
        end

        -- make precompiled source file
        _make_source_file_forpch(vcxprojfile, vsinfo, target, vcxprojdir)

    vcxprojfile:leave("</ItemGroup>")

    -- add header files
    local pcheader = target.pcxxheader or target.pcheader
    vcxprojfile:enter("<ItemGroup>")
        for _, includefile in ipairs(target.headerfiles) do
            -- we need ignore pcheader file to fix https://github.com/xmake-io/xmake/issues/1171
            if not pcheader or includefile ~= pcheader then
                _make_header_file(vcxprojfile, includefile, vcxprojdir)
            end
        end
    vcxprojfile:leave("</ItemGroup>")
end

-- make vcxproj
function make(vsinfo, target)

    -- the target name
    local targetname = target.name

    -- the vcxproj directory
    local vcxprojdir = path.join(vsinfo.solution_dir, targetname)

    -- open vcxproj file
    local vcxprojpath = path.join(vcxprojdir, targetname .. ".vcxproj")
    local vcxprojfile = vsfile.open(vcxprojpath, "w")

    -- init indent character
    vsfile.indentchar('  ')

    -- make header
    _make_header(vcxprojfile, vsinfo)

    -- make Configurations
    _make_configurations(vcxprojfile, vsinfo, target, vcxprojdir)

    -- make common items
    _make_common_items(vcxprojfile, vsinfo, target, vcxprojdir)

    -- make source files
    _make_source_files(vcxprojfile, vsinfo, target, vcxprojdir)

    -- make tailer
    _make_tailer(vcxprojfile, vsinfo)

    -- exit solution file
    vcxprojfile:close()
end