| Age | Commit message (Collapse) | Author |
|---|
|
We move andes directory to platform/generic as the necessary fdt
drivers are available, the users can enable the console, timer, ipi,
irqchip and reset devices by adding device tree nodes stated in the
docs/platform/andes-ae350.md.
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.
Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.
dts example (Quad-core AX45MP):
plicsw: interrupt-controller@e6400000 {
compatible = "andestech,plicsw";
reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
interrupts-extended = <&CPU0_intc 3
&CPU1_intc 3
&CPU2_intc 3
&CPU3_intc 3>;
interrupt-controller;
#address-cells = <2>;
#interrupt-cells = <2>;
};
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
Since we can get the PLMT base address and timer frequency from
device tree, move plmt timer device to fdt timer framework.
dts example (Quad-core AX45MP):
cpus {
...
timebase-frequency = <0x3938700>;
...
}
soc {
...
plmt0@e6000000 {
compatible = "andestech,plmt0";
reg = <0x00 0xe6000000 0x00 0x100000>;
interrupts-extended = <&cpu0_intc 0x07
&cpu1_intc 0x07
&cpu2_intc 0x07
&cpu3_intc 0x07>;
};
...
}
Signed-off-by: Yu Chien Peter Lin <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
The options defined in config.mk can be specified in objects.mk of each
platform so let us remove config.mk from all platforms.
Signed-off-by: Anup Patel <[email protected]>
Tested-by: Andrew Jones <[email protected]>
Acked-by: Atish Patra <[email protected]>
Tested-by: Atish Patra <[email protected]>
|
|
This patch contains the following AE350 specific SBIs:
- get mcache_ctl status
- get mmisc_ctl status
- set mcache_ctl status
- set mmisc_ctl status
- I-cache operation
- D-cache operation
- enable/disable L1-I-cache prefetch
- enable/disable L1-D-cache prefetch
- enable/disable non-blocking load store
- enable/disable write-around
Signed-off-by: Nylon Chen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Reviewed-by: Atish Patra <[email protected]>
|
|
Signed-off-by: Bin Meng <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
|
|
This commit provides basic support for the AE350 platform.
Signed-off-by: Zong Li <[email protected]>
Signed-off-by: Nylon Chen <[email protected]>
|
