| Age | Commit message (Collapse) | Author |
|---|
|
P8700 has MIPS specific CSRs. Fix the list, adding
few missing ones and remove few non-existing
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Debug print MMIO regions
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
CPU clusters 1 and 2 cannot access NCORE registers through AUX ports.
AUX ports of clusters 1 and 2 are connected to NCORE through east port.
East port has no access to NCORE registers address space.
Re-route NCORE registers range to MEM port by re-configuring MMIO
regions in the GCR. REsulting map is as below. Mind a gap between
regions [1] and [2]; this gap covering NCORE registers now routed
to the default MEM port
Cluster 0: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Cluster 1: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Cluster 2: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Use eyeq7 specific method to synchronously restart architectural
mtimer and eyeq7h specific high-resolution timer with common
hardware trigger. This ensures all timers are precisely in sync
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
There's high-resolution (1GHz) timer found in the p8700 cluster.
This timer used for precise time measurement by platform specific
software.
Synchronize this proprietary timers to reference in cluster 0.
Procedure borrowed from the aclint mtimer.
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Switch to GENMASK, EXTRACT_BITFIELD, INSERT_BITFIELD
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Reserve memory regions for CPU clusters according to P8700
cluster memory layout.
There's a set of components in the CPU cluster according to [1]
[1] https://mips.com/wp-content/uploads/2025/11/P8700-F_Programmers_Reference_Manual-TM.pdf
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
P8700 has a read-only cache configuration registers.
Provide a CPU specific function to extract cache information.
Use this information in the eyeq7h board for informational
message
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Refactor MIPS P8700 support, convert P8700 into a "CPU" and add
2 platforms using this CPU:
- "boston" - FPGA platform developed by MIPS
- "eyeq7h" - automotive platform by Mobileye
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Modify the coherence manager register accessors to use the global variable
p8700_cm_info instead of the statically declared GLOBAL_CM_BASE array.
Also use p8700_cm_info to get the number of coherence managers and their
base addresses in mips_p8700_early_init() and mips_p8700_nascent_init().
Clean up the hard-coded values in mips/board.h, access to the coherence
manager is now fully based on information provided by platform compatible
from the device tree.
Signed-off-by: Benoît Monin <[email protected]>
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Introduce a structure p8700_cm_info holding the number of coherence
managers and their base addresses found in a particular SoC.
Declare a global pointer to the structure that is set in
mips_p8700_platform_init(), based on the match data of the platform
compatible.
For the match data of the MIPS P8700, a single coherence manager with
a base address of 0x16100000 is declared, identical to what is found
in mips/board.h.
For now, access to the coherence manager register is still based on
the hard-coded values defined in mips/board.h.
Signed-off-by: Benoît Monin <[email protected]>
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In the multi-cluster system each cluster has its own CM (Coherency Manager).
Every CM has its "global" memory address where it is accessible from
any bus master.
Initially, all CMs accessible from the local cluster using same "local"
address. Transactions by local address are not routed through system bus
and thus are faster.
Remap CM in every cluster to the local address matching its global address.
Then, every CM is always accessed using same address, but when transaction
initiated from the local cluster it is routed internally.
This removes need for 2 PMP regions covering local address access.
CM accessor functions simplified because there's no need to detect whether
transaction is local or global
Access timer always in cluster 0
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
use function call like format; debug print returning value
of the "read" accessor
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Extend generic platform to support MIPS P8700.
Signed-off-by: Chao-ying Fu <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
