diff options
| author | Xian Wu <[email protected]> | 2023-12-27 18:41:52 +0800 |
|---|---|---|
| committer | GitHub <[email protected]> | 2023-12-27 18:41:52 +0800 |
| commit | 6360253c129afcb91d34770cb253eea8d837e66a (patch) | |
| tree | 065167006028882ff4d57208252d1e0ce9f3b4e4 /bsp/synwit/libraries/SWM341_CSL | |
| parent | 7b4592c2d15bf90c1958bdbc840ea4df3d97cd96 (diff) | |
Synwit MCU 采用新的 BSP 框架,将 BSP 与 libraries 分离 (#8432)
Diffstat (limited to 'bsp/synwit/libraries/SWM341_CSL')
117 files changed, 67496 insertions, 0 deletions
diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cachel1_armv7.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cachel1_armv7.h new file mode 100644 index 0000000000..d171691f46 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cachel1_armv7.h @@ -0,0 +1,411 @@ +/****************************************************************************** + * @file cachel1_armv7.h + * @brief CMSIS Level 1 Cache API for Armv7-M and later + * @version V1.0.0 + * @date 03. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_CACHEL1_ARMV7_H +#define ARM_CACHEL1_ARMV7_H + +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_CacheFunctions Cache Functions + \brief Functions that configure Instruction and Data cache. + @{ + */ + +/* Cache Size ID Register Macros */ +#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) +#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) + +#ifndef __SCB_DCACHE_LINE_SIZE +#define __SCB_DCACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#endif + +#ifndef __SCB_ICACHE_LINE_SIZE +#define __SCB_ICACHE_LINE_SIZE 32U /*!< Cortex-M7 cache line size is fixed to 32 bytes (8 words). See also register SCB_CCSIDR */ +#endif + +/** + \brief Enable I-Cache + \details Turns on I-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if (SCB->CCR & SCB_CCR_IC_Msk) return; /* return if ICache is already enabled */ + + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable I-Cache + \details Turns off I-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ + SCB->ICIALLU = 0UL; /* invalidate I-Cache */ + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate I-Cache + \details Invalidates I-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateICache (void) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + __DSB(); + __ISB(); + SCB->ICIALLU = 0UL; + __DSB(); + __ISB(); + #endif +} + + +/** + \brief I-Cache Invalidate by address + \details Invalidates I-Cache for the given address. + I-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + I-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] isize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateICache_by_Addr (void *addr, int32_t isize) +{ + #if defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U) + if ( isize > 0 ) { + int32_t op_size = isize + (((uint32_t)addr) & (__SCB_ICACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_ICACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->ICIMVAU = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_ICACHE_LINE_SIZE; + op_size -= __SCB_ICACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief Enable D-Cache + \details Turns on D-Cache + */ +__STATIC_FORCEINLINE void SCB_EnableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + if (SCB->CCR & SCB_CCR_DC_Msk) return; /* return if DCache is already enabled */ + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + __DSB(); + + SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Disable D-Cache + \details Turns off D-Cache + */ +__STATIC_FORCEINLINE void SCB_DisableDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Invalidate D-Cache + \details Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_InvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | + ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean D-Cache + \details Cleans D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | + ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief Clean & Invalidate D-Cache + \details Cleans and Invalidates D-Cache + */ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache (void) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + uint32_t ccsidr; + uint32_t sets; + uint32_t ways; + + SCB->CSSELR = 0U; /* select Level 1 data cache */ + __DSB(); + + ccsidr = SCB->CCSIDR; + + /* clean & invalidate D-Cache */ + sets = (uint32_t)(CCSIDR_SETS(ccsidr)); + do { + ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); + do { + SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | + ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); + #if defined ( __CC_ARM ) + __schedule_barrier(); + #endif + } while (ways-- != 0U); + } while(sets-- != 0U); + + __DSB(); + __ISB(); + #endif +} + + +/** + \brief D-Cache Invalidate by address + \details Invalidates D-Cache for the given address. + D-Cache is invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are invalidated. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_InvalidateDCache_by_Addr (void *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean by address + \details Cleans D-Cache for the given address + D-Cache is cleaned starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned. + \param[in] addr address + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + + +/** + \brief D-Cache Clean and Invalidate by address + \details Cleans and invalidates D_Cache for the given address + D-Cache is cleaned and invalidated starting from a 32 byte aligned address in 32 byte granularity. + D-Cache memory blocks which are part of given address + given size are cleaned and invalidated. + \param[in] addr address (aligned to 32-byte boundary) + \param[in] dsize size of memory block (in number of bytes) +*/ +__STATIC_FORCEINLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) +{ + #if defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U) + if ( dsize > 0 ) { + int32_t op_size = dsize + (((uint32_t)addr) & (__SCB_DCACHE_LINE_SIZE - 1U)); + uint32_t op_addr = (uint32_t)addr /* & ~(__SCB_DCACHE_LINE_SIZE - 1U) */; + + __DSB(); + + do { + SCB->DCCIMVAC = op_addr; /* register accepts only 32byte aligned values, only bits 31..5 are valid */ + op_addr += __SCB_DCACHE_LINE_SIZE; + op_size -= __SCB_DCACHE_LINE_SIZE; + } while ( op_size > 0 ); + + __DSB(); + __ISB(); + } + #endif +} + +/*@} end of CMSIS_Core_CacheFunctions */ + +#endif /* ARM_CACHEL1_ARMV7_H */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armcc.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armcc.h new file mode 100644 index 0000000000..92acbd81b6 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armcc.h @@ -0,0 +1,885 @@ +/**************************************************************************//** + * @file cmsis_armcc.h + * @brief CMSIS compiler ARMCC (Arm Compiler 5) header file + * @version V5.2.1 + * @date 26. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_ARMCC_H +#define __CMSIS_ARMCC_H + + +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) + #error "Please use Arm Compiler Toolchain V4.0.677 or later!" +#endif + +/* CMSIS compiler control architecture macros */ +#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \ + (defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) ) + #define __ARM_ARCH_6M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1)) + #define __ARM_ARCH_7M__ 1 +#endif + +#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1)) + #define __ARM_ARCH_7EM__ 1 +#endif + + /* __ARM_ARCH_8M_BASE__ not applicable */ + /* __ARM_ARCH_8M_MAIN__ not applicable */ + /* __ARM_ARCH_8_1M_MAIN__ not applicable */ + +/* CMSIS compiler control DSP macros */ +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __ARM_FEATURE_DSP 1 +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE static __forceinline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __declspec(noreturn) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed)) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT __packed struct +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION __packed union +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x))) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr))) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr))) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __memory_changed() +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); */ + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_INLINE uint32_t __get_IPSR(void) +{ + register uint32_t __regIPSR __ASM("ipsr"); + return(__regIPSR); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_INLINE uint32_t __get_APSR(void) +{ + register uint32_t __regAPSR __ASM("apsr"); + return(__regAPSR); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_INLINE uint32_t __get_xPSR(void) +{ + register uint32_t __regXPSR __ASM("xpsr"); + return(__regXPSR); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_INLINE uint32_t __get_PSP(void) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + return(__regProcessStackPointer); +} + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) +{ + register uint32_t __regProcessStackPointer __ASM("psp"); + __regProcessStackPointer = topOfProcStack; +} + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_INLINE uint32_t __get_MSP(void) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + return(__regMainStackPointer); +} + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) +{ + register uint32_t __regMainStackPointer __ASM("msp"); + __regMainStackPointer = topOfMainStack; +} + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xFFU); +} + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + register uint32_t __regBasePriMax __ASM("basepri_max"); + __regBasePriMax = (basePri & 0xFFU); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & (uint32_t)1U); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_INLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + return(__regfpscr); +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + register uint32_t __regfpscr __ASM("fpscr"); + __regfpscr = (fpscr); +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __nop + + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __dsb(0xF) + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV __rev + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) +{ + rev16 r0, r0 + bx lr +} +#endif + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} +#endif + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +#define __ROR __ror + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __breakpoint(value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + #define __RBIT __rbit +#else +__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ + return result; +} +#endif + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +#define __CLZ __clz + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) +#else + #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) +#else + #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) +#else + #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXB(value, ptr) __strex(value, ptr) +#else + #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXH(value, ptr) __strex(value, ptr) +#else + #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) + #define __STREXW(value, ptr) __strex(value, ptr) +#else + #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") +#endif + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __clrex + + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +#ifndef __NO_EMBEDDED_ASM +__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) +{ + rrx r0, r0 + bx lr +} +#endif + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRBT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRHT(value, ptr) __strt(value, ptr) + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +#define __STRT(value, ptr) __strt(value, ptr) + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) + +#define __SADD8 __sadd8 +#define __QADD8 __qadd8 +#define __SHADD8 __shadd8 +#define __UADD8 __uadd8 +#define __UQADD8 __uqadd8 +#define __UHADD8 __uhadd8 +#define __SSUB8 __ssub8 +#define __QSUB8 __qsub8 +#define __SHSUB8 __shsub8 +#define __USUB8 __usub8 +#define __UQSUB8 __uqsub8 +#define __UHSUB8 __uhsub8 +#define __SADD16 __sadd16 +#define __QADD16 __qadd16 +#define __SHADD16 __shadd16 +#define __UADD16 __uadd16 +#define __UQADD16 __uqadd16 +#define __UHADD16 __uhadd16 +#define __SSUB16 __ssub16 +#define __QSUB16 __qsub16 +#define __SHSUB16 __shsub16 +#define __USUB16 __usub16 +#define __UQSUB16 __uqsub16 +#define __UHSUB16 __uhsub16 +#define __SASX __sasx +#define __QASX __qasx +#define __SHASX __shasx +#define __UASX __uasx +#define __UQASX __uqasx +#define __UHASX __uhasx +#define __SSAX __ssax +#define __QSAX __qsax +#define __SHSAX __shsax +#define __USAX __usax +#define __UQSAX __uqsax +#define __UHSAX __uhsax +#define __USAD8 __usad8 +#define __USADA8 __usada8 +#define __SSAT16 __ssat16 +#define __USAT16 __usat16 +#define __UXTB16 __uxtb16 +#define __UXTAB16 __uxtab16 +#define __SXTB16 __sxtb16 +#define __SXTAB16 __sxtab16 +#define __SMUAD __smuad +#define __SMUADX __smuadx +#define __SMLAD __smlad +#define __SMLADX __smladx +#define __SMLALD __smlald +#define __SMLALDX __smlaldx +#define __SMUSD __smusd +#define __SMUSDX __smusdx +#define __SMLSD __smlsd +#define __SMLSDX __smlsdx +#define __SMLSLD __smlsld +#define __SMLSLDX __smlsldx +#define __SEL __sel +#define __QADD __qadd +#define __QSUB __qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ + ((int64_t)(ARG3) << 32U) ) >> 32U)) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCC_H */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armclang.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armclang.h new file mode 100644 index 0000000000..0959d9b768 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armclang.h @@ -0,0 +1,1467 @@ +/**************************************************************************//** + * @file cmsis_armclang.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V5.3.1 + * @date 26. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include <arm_compat.h> /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__ ) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) ) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) + +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) || \ + (defined (__ARM_ARCH_8_1M_MAIN__) && (__ARM_ARCH_8_1M_MAIN__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +#define __SADD8 __builtin_arm_sadd8 +#define __QADD8 __builtin_arm_qadd8 +#define __SHADD8 __builtin_arm_shadd8 +#define __UADD8 __builtin_arm_uadd8 +#define __UQADD8 __builtin_arm_uqadd8 +#define __UHADD8 __builtin_arm_uhadd8 +#define __SSUB8 __builtin_arm_ssub8 +#define __QSUB8 __builtin_arm_qsub8 +#define __SHSUB8 __builtin_arm_shsub8 +#define __USUB8 __builtin_arm_usub8 +#define __UQSUB8 __builtin_arm_uqsub8 +#define __UHSUB8 __builtin_arm_uhsub8 +#define __SADD16 __builtin_arm_sadd16 +#define __QADD16 __builtin_arm_qadd16 +#define __SHADD16 __builtin_arm_shadd16 +#define __UADD16 __builtin_arm_uadd16 +#define __UQADD16 __builtin_arm_uqadd16 +#define __UHADD16 __builtin_arm_uhadd16 +#define __SSUB16 __builtin_arm_ssub16 +#define __QSUB16 __builtin_arm_qsub16 +#define __SHSUB16 __builtin_arm_shsub16 +#define __USUB16 __builtin_arm_usub16 +#define __UQSUB16 __builtin_arm_uqsub16 +#define __UHSUB16 __builtin_arm_uhsub16 +#define __SASX __builtin_arm_sasx +#define __QASX __builtin_arm_qasx +#define __SHASX __builtin_arm_shasx +#define __UASX __builtin_arm_uasx +#define __UQASX __builtin_arm_uqasx +#define __UHASX __builtin_arm_uhasx +#define __SSAX __builtin_arm_ssax +#define __QSAX __builtin_arm_qsax +#define __SHSAX __builtin_arm_shsax +#define __USAX __builtin_arm_usax +#define __UQSAX __builtin_arm_uqsax +#define __UHSAX __builtin_arm_uhsax +#define __USAD8 __builtin_arm_usad8 +#define __USADA8 __builtin_arm_usada8 +#define __SSAT16 __builtin_arm_ssat16 +#define __USAT16 __builtin_arm_usat16 +#define __UXTB16 __builtin_arm_uxtb16 +#define __UXTAB16 __builtin_arm_uxtab16 +#define __SXTB16 __builtin_arm_sxtb16 +#define __SXTAB16 __builtin_arm_sxtab16 +#define __SMUAD __builtin_arm_smuad +#define __SMUADX __builtin_arm_smuadx +#define __SMLAD __builtin_arm_smlad +#define __SMLADX __builtin_arm_smladx +#define __SMLALD __builtin_arm_smlald +#define __SMLALDX __builtin_arm_smlaldx +#define __SMUSD __builtin_arm_smusd +#define __SMUSDX __builtin_arm_smusdx +#define __SMLSD __builtin_arm_smlsd +#define __SMLSDX __builtin_arm_smlsdx +#define __SMLSLD __builtin_arm_smlsld +#define __SMLSLDX __builtin_arm_smlsldx +#define __SEL __builtin_arm_sel +#define __QADD __builtin_arm_qadd +#define __QSUB __builtin_arm_qsub + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armclang_ltm.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armclang_ltm.h new file mode 100644 index 0000000000..8afafd0dcb --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_armclang_ltm.h @@ -0,0 +1,1893 @@ +/**************************************************************************//** + * @file cmsis_armclang_ltm.h + * @brief CMSIS compiler armclang (Arm Compiler 6) header file + * @version V1.3.0 + * @date 26. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2018-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/*lint -esym(9058, IRQn)*/ /* disable MISRA 2012 Rule 2.4 for IRQn */ + +#ifndef __CMSIS_ARMCLANG_H +#define __CMSIS_ARMCLANG_H + +#pragma clang system_header /* treat file as system include file */ + +#ifndef __ARM_COMPAT_H +#include <arm_compat.h> /* Compatibility header for Arm Compiler 5 intrinsics */ +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE __inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static __inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static __inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32 */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_WRITE */ + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT16_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT16_READ */ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_WRITE)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_WRITE */ + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma clang diagnostic push + #pragma clang diagnostic ignored "-Wpacked" +/*lint -esym(9058, T_UINT32_READ)*/ /* disable MISRA 2012 Rule 2.4 for T_UINT32_READ */ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma clang diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START +#define __PROGRAM_START __main +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP Image$$ARM_LIB_STACK$$ZI$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT Image$$ARM_LIB_STACK$$ZI$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section("RESET"))) +#endif + + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __enable_irq(); see arm_compat.h */ + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +/* intrinsic void __disable_irq(); see arm_compat.h */ + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __enable_fault_irq __enable_fiq /* see arm_compat.h */ + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +#define __disable_fault_irq __disable_fiq /* see arm_compat.h */ + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __get_FPSCR (uint32_t)__builtin_arm_get_fpscr +#else +#define __get_FPSCR() ((uint32_t)0U) +#endif + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#define __set_FPSCR __builtin_arm_set_fpscr +#else +#define __set_FPSCR(x) ((void)(x)) +#endif + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP __builtin_arm_nop + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI __builtin_arm_wfi + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE __builtin_arm_wfe + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV __builtin_arm_sev + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +#define __ISB() __builtin_arm_isb(0xF) + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +#define __DSB() __builtin_arm_dsb(0xF) + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +#define __DMB() __builtin_arm_dmb(0xF) + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV(value) __builtin_bswap32(value) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REV16(value) __ROR(__REV(value), 16) + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +#define __REVSH(value) (int16_t)__builtin_bswap16(value) + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +#define __RBIT __builtin_arm_rbit + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM Compiler 6.10 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDREXB (uint8_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDREXH (uint16_t)__builtin_arm_ldrex + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDREXW (uint32_t)__builtin_arm_ldrex + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXB (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXH (uint32_t)__builtin_arm_strex + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STREXW (uint32_t)__builtin_arm_strex + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +#define __CLREX __builtin_arm_clrex + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT __builtin_arm_ssat + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT __builtin_arm_usat + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +#define __LDAEXB (uint8_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +#define __LDAEXH (uint16_t)__builtin_arm_ldaex + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +#define __LDAEX (uint32_t)__builtin_arm_ldaex + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXB (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEXH (uint32_t)__builtin_arm_stlex + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +#define __STLEX (uint32_t)__builtin_arm_stlex + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1,ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +#define __USAT16(ARG1,ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#endif /* __CMSIS_ARMCLANG_H */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_compiler.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_compiler.h new file mode 100644 index 0000000000..adbf296f15 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_compiler.h @@ -0,0 +1,283 @@ +/**************************************************************************//** + * @file cmsis_compiler.h + * @brief CMSIS compiler generic header file + * @version V5.1.0 + * @date 09. October 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_COMPILER_H +#define __CMSIS_COMPILER_H + +#include <stdint.h> + +/* + * Arm Compiler 4/5 + */ +#if defined ( __CC_ARM ) + #include "cmsis_armcc.h" + + +/* + * Arm Compiler 6.6 LTM (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) && (__ARMCC_VERSION < 6100100) + #include "cmsis_armclang_ltm.h" + + /* + * Arm Compiler above 6.10.1 (armclang) + */ +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6100100) + #include "cmsis_armclang.h" + + +/* + * GNU Compiler + */ +#elif defined ( __GNUC__ ) + #include "cmsis_gcc.h" + + +/* + * IAR Compiler + */ +#elif defined ( __ICCARM__ ) + #include <cmsis_iccarm.h> + + +/* + * TI Arm Compiler + */ +#elif defined ( __TI_ARM__ ) + #include <cmsis_ccs.h> + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __attribute__((packed)) + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed)) + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed)) + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) + #endif + #ifndef __RESTRICT + #define __RESTRICT __restrict + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * TASKING Compiler + */ +#elif defined ( __TASKING__ ) + /* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all intrinsics, + * Including the CMSIS ones. + */ + + #ifndef __ASM + #define __ASM __asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + #define __NO_RETURN __attribute__((noreturn)) + #endif + #ifndef __USED + #define __USED __attribute__((used)) + #endif + #ifndef __WEAK + #define __WEAK __attribute__((weak)) + #endif + #ifndef __PACKED + #define __PACKED __packed__ + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __packed__ + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION union __packed__ + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + struct __packed__ T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #define __ALIGNED(x) __align(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +/* + * COSMIC Compiler + */ +#elif defined ( __CSMC__ ) + #include <cmsis_csm.h> + + #ifndef __ASM + #define __ASM _asm + #endif + #ifndef __INLINE + #define __INLINE inline + #endif + #ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline + #endif + #ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __STATIC_INLINE + #endif + #ifndef __NO_RETURN + // NO RETURN is automatically detected hence no warning here + #define __NO_RETURN + #endif + #ifndef __USED + #warning No compiler specific solution for __USED. __USED is ignored. + #define __USED + #endif + #ifndef __WEAK + #define __WEAK __weak + #endif + #ifndef __PACKED + #define __PACKED @packed + #endif + #ifndef __PACKED_STRUCT + #define __PACKED_STRUCT @packed struct + #endif + #ifndef __PACKED_UNION + #define __PACKED_UNION @packed union + #endif + #ifndef __UNALIGNED_UINT32 /* deprecated */ + @packed struct T_UINT32 { uint32_t v; }; + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) + #endif + #ifndef __UNALIGNED_UINT16_WRITE + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT16_READ + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) + #endif + #ifndef __UNALIGNED_UINT32_WRITE + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) + #endif + #ifndef __UNALIGNED_UINT32_READ + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) + #endif + #ifndef __ALIGNED + #warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored. + #define __ALIGNED(x) + #endif + #ifndef __RESTRICT + #warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored. + #define __RESTRICT + #endif + #ifndef __COMPILER_BARRIER + #warning No compiler specific solution for __COMPILER_BARRIER. __COMPILER_BARRIER is ignored. + #define __COMPILER_BARRIER() (void)0 + #endif + + +#else + #error Unknown compiler. +#endif + + +#endif /* __CMSIS_COMPILER_H */ + diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_gcc.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_gcc.h new file mode 100644 index 0000000000..0578f28173 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_gcc.h @@ -0,0 +1,2177 @@ +/**************************************************************************//** + * @file cmsis_gcc.h + * @brief CMSIS compiler GCC header file + * @version V5.3.0 + * @date 26. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __CMSIS_GCC_H +#define __CMSIS_GCC_H + +/* ignore some GCC warnings */ +#pragma GCC diagnostic push +#pragma GCC diagnostic ignored "-Wsign-conversion" +#pragma GCC diagnostic ignored "-Wconversion" +#pragma GCC diagnostic ignored "-Wunused-parameter" + +/* Fallback for __has_builtin */ +#ifndef __has_builtin + #define __has_builtin(x) (0) +#endif + +/* CMSIS compiler specific defines */ +#ifndef __ASM + #define __ASM __asm +#endif +#ifndef __INLINE + #define __INLINE inline +#endif +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __attribute__((always_inline)) static inline +#endif +#ifndef __NO_RETURN + #define __NO_RETURN __attribute__((__noreturn__)) +#endif +#ifndef __USED + #define __USED __attribute__((used)) +#endif +#ifndef __WEAK + #define __WEAK __attribute__((weak)) +#endif +#ifndef __PACKED + #define __PACKED __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_STRUCT + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) +#endif +#ifndef __PACKED_UNION + #define __PACKED_UNION union __attribute__((packed, aligned(1))) +#endif +#ifndef __UNALIGNED_UINT32 /* deprecated */ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + struct __attribute__((packed)) T_UINT32 { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v) +#endif +#ifndef __UNALIGNED_UINT16_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_WRITE { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT16_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT16_READ { uint16_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v) +#endif +#ifndef __UNALIGNED_UINT32_WRITE + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_WRITE { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val)) +#endif +#ifndef __UNALIGNED_UINT32_READ + #pragma GCC diagnostic push + #pragma GCC diagnostic ignored "-Wpacked" + #pragma GCC diagnostic ignored "-Wattributes" + __PACKED_STRUCT T_UINT32_READ { uint32_t v; }; + #pragma GCC diagnostic pop + #define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v) +#endif +#ifndef __ALIGNED + #define __ALIGNED(x) __attribute__((aligned(x))) +#endif +#ifndef __RESTRICT + #define __RESTRICT __restrict +#endif +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +/* ######################### Startup and Lowlevel Init ######################## */ + +#ifndef __PROGRAM_START + +/** + \brief Initializes data and bss sections + \details This default implementations initialized all data and additional bss + sections relying on .copy.table and .zero.table specified properly + in the used linker script. + + */ +__STATIC_FORCEINLINE __NO_RETURN void __cmsis_start(void) +{ + extern void _start(void) __NO_RETURN; + + typedef struct { + uint32_t const* src; + uint32_t* dest; + uint32_t wlen; + } __copy_table_t; + + typedef struct { + uint32_t* dest; + uint32_t wlen; + } __zero_table_t; + + extern const __copy_table_t __copy_table_start__; + extern const __copy_table_t __copy_table_end__; + extern const __zero_table_t __zero_table_start__; + extern const __zero_table_t __zero_table_end__; + + for (__copy_table_t const* pTable = &__copy_table_start__; pTable < &__copy_table_end__; ++pTable) { + for(uint32_t i=0u; i<pTable->wlen; ++i) { + pTable->dest[i] = pTable->src[i]; + } + } + + for (__zero_table_t const* pTable = &__zero_table_start__; pTable < &__zero_table_end__; ++pTable) { + for(uint32_t i=0u; i<pTable->wlen; ++i) { + pTable->dest[i] = 0u; + } + } + + _start(); +} + +#define __PROGRAM_START __cmsis_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP __StackTop +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT __StackLimit +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __Vectors +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE __attribute__((used, section(".vectors"))) +#endif + +/* ########################### Core Function Access ########################### */ +/** \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions + @{ + */ + +/** + \brief Enable IRQ Interrupts + \details Enables IRQ interrupts by clearing the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_irq(void) +{ + __ASM volatile ("cpsie i" : : : "memory"); +} + + +/** + \brief Disable IRQ Interrupts + \details Disables IRQ interrupts by setting the I-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_irq(void) +{ + __ASM volatile ("cpsid i" : : : "memory"); +} + + +/** + \brief Get Control Register + \details Returns the content of the Control Register. + \return Control Register value + */ +__STATIC_FORCEINLINE uint32_t __get_CONTROL(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Control Register (non-secure) + \details Returns the content of the non-secure Control Register when in secure mode. + \return non-secure Control Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_CONTROL_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Control Register + \details Writes the given value to the Control Register. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Control Register (non-secure) + \details Writes the given value to the non-secure Control Register when in secure state. + \param [in] control Control Register value to set + */ +__STATIC_FORCEINLINE void __TZ_set_CONTROL_NS(uint32_t control) +{ + __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); +} +#endif + + +/** + \brief Get IPSR Register + \details Returns the content of the IPSR Register. + \return IPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_IPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get APSR Register + \details Returns the content of the APSR Register. + \return APSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_APSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, apsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get xPSR Register + \details Returns the content of the xPSR Register. + \return xPSR Register value + */ +__STATIC_FORCEINLINE uint32_t __get_xPSR(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); + return(result); +} + + +/** + \brief Get Process Stack Pointer + \details Returns the current value of the Process Stack Pointer (PSP). + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer (non-secure) + \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. + \return PSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Process Stack Pointer + \details Assigns the given value to the Process Stack Pointer (PSP). + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. + \param [in] topOfProcStack Process Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : ); +} +#endif + + +/** + \brief Get Main Stack Pointer + \details Returns the current value of the Main Stack Pointer (MSP). + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSP(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer (non-secure) + \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. + \return MSP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Main Stack Pointer + \details Assigns the given value to the Main Stack Pointer (MSP). + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : ); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. + \param [in] topOfMainStack Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : ); +} +#endif + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Stack Pointer (non-secure) + \details Returns the current value of the non-secure Stack Pointer (SP) when in secure state. + \return SP Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_SP_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, sp_ns" : "=r" (result) ); + return(result); +} + + +/** + \brief Set Stack Pointer (non-secure) + \details Assigns the given value to the non-secure Stack Pointer (SP) when in secure state. + \param [in] topOfStack Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_SP_NS(uint32_t topOfStack) +{ + __ASM volatile ("MSR sp_ns, %0" : : "r" (topOfStack) : ); +} +#endif + + +/** + \brief Get Priority Mask + \details Returns the current state of the priority mask bit from the Priority Mask Register. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __get_PRIMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Priority Mask (non-secure) + \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. + \return Priority Mask value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PRIMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Priority Mask + \details Assigns the given value to the Priority Mask Register. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Priority Mask (non-secure) + \details Assigns the given value to the non-secure Priority Mask Register when in secure state. + \param [in] priMask Priority Mask + */ +__STATIC_FORCEINLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) +{ + __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); +} +#endif + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Enable FIQ + \details Enables FIQ interrupts by clearing the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __enable_fault_irq(void) +{ + __ASM volatile ("cpsie f" : : : "memory"); +} + + +/** + \brief Disable FIQ + \details Disables FIQ interrupts by setting the F-bit in the CPSR. + Can only be executed in Privileged modes. + */ +__STATIC_FORCEINLINE void __disable_fault_irq(void) +{ + __ASM volatile ("cpsid f" : : : "memory"); +} + + +/** + \brief Get Base Priority + \details Returns the current value of the Base Priority register. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __get_BASEPRI(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Base Priority (non-secure) + \details Returns the current value of the non-secure Base Priority register when in secure state. + \return Base Priority register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_BASEPRI_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Base Priority + \details Assigns the given value to the Base Priority register. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI(uint32_t basePri) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (basePri) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Base Priority (non-secure) + \details Assigns the given value to the non-secure Base Priority register when in secure state. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __TZ_set_BASEPRI_NS(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_ns, %0" : : "r" (basePri) : "memory"); +} +#endif + + +/** + \brief Set Base Priority with condition + \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, + or the new value increases the BASEPRI priority level. + \param [in] basePri Base Priority value to set + */ +__STATIC_FORCEINLINE void __set_BASEPRI_MAX(uint32_t basePri) +{ + __ASM volatile ("MSR basepri_max, %0" : : "r" (basePri) : "memory"); +} + + +/** + \brief Get Fault Mask + \details Returns the current value of the Fault Mask register. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __get_FAULTMASK(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Fault Mask (non-secure) + \details Returns the current value of the non-secure Fault Mask register when in secure state. + \return Fault Mask register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_FAULTMASK_NS(void) +{ + uint32_t result; + + __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); + return(result); +} +#endif + + +/** + \brief Set Fault Mask + \details Assigns the given value to the Fault Mask register. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Fault Mask (non-secure) + \details Assigns the given value to the non-secure Fault Mask register when in secure state. + \param [in] faultMask Fault Mask value to set + */ +__STATIC_FORCEINLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); +} +#endif + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + +/** + \brief Get Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_PSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim" : "=r" (result) ); + return result; +#endif +} + +#if (defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Process Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \return PSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_PSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Process Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Process Stack Pointer (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. + \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)ProcStackPtrLimit; +#else + __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); +#endif +} +#endif + + +/** + \brief Get Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always in non-secure + mode. + + \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __get_MSPLIM(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim" : "=r" (result) ); + return result; +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Get Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence zero is returned always. + + \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. + \return MSPLIM Register value + */ +__STATIC_FORCEINLINE uint32_t __TZ_get_MSPLIM_NS(void) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + return 0U; +#else + uint32_t result; + __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); + return result; +#endif +} +#endif + + +/** + \brief Set Main Stack Pointer Limit + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored in non-secure + mode. + + \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). + \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set + */ +__STATIC_FORCEINLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); +#endif +} + + +#if (defined (__ARM_FEATURE_CMSE ) && (__ARM_FEATURE_CMSE == 3)) +/** + \brief Set Main Stack Pointer Limit (non-secure) + Devices without ARMv8-M Main Extensions (i.e. Cortex-M23) lack the non-secure + Stack Pointer Limit register hence the write is silently ignored. + + \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. + \param [in] MainStackPtrLimit Main Stack Pointer value to set + */ +__STATIC_FORCEINLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) +{ +#if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)MainStackPtrLimit; +#else + __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); +#endif +} +#endif + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +/** + \brief Get FPSCR + \details Returns the current value of the Floating Point Status/Control register. + \return Floating Point Status/Control register value + */ +__STATIC_FORCEINLINE uint32_t __get_FPSCR(void) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_get_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + return __builtin_arm_get_fpscr(); +#else + uint32_t result; + + __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); + return(result); +#endif +#else + return(0U); +#endif +} + + +/** + \brief Set FPSCR + \details Assigns the given value to the Floating Point Status/Control register. + \param [in] fpscr Floating Point Status/Control value to set + */ +__STATIC_FORCEINLINE void __set_FPSCR(uint32_t fpscr) +{ +#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) +#if __has_builtin(__builtin_arm_set_fpscr) +// Re-enable using built-in when GCC has been fixed +// || (__GNUC__ > 7) || (__GNUC__ == 7 && __GNUC_MINOR__ >= 2) + /* see https://gcc.gnu.org/ml/gcc-patches/2017-04/msg00443.html */ + __builtin_arm_set_fpscr(fpscr); +#else + __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc", "memory"); +#endif +#else + (void)fpscr; +#endif +} + + +/*@} end of CMSIS_Core_RegAccFunctions */ + + +/* ########################## Core Instruction Access ######################### */ +/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface + Access to dedicated instructions + @{ +*/ + +/* Define macros for porting to both thumb1 and thumb2. + * For thumb1, use low register (r0-r7), specified by constraint "l" + * Otherwise, use general registers, specified by constraint "r" */ +#if defined (__thumb__) && !defined (__thumb2__) +#define __CMSIS_GCC_OUT_REG(r) "=l" (r) +#define __CMSIS_GCC_RW_REG(r) "+l" (r) +#define __CMSIS_GCC_USE_REG(r) "l" (r) +#else +#define __CMSIS_GCC_OUT_REG(r) "=r" (r) +#define __CMSIS_GCC_RW_REG(r) "+r" (r) +#define __CMSIS_GCC_USE_REG(r) "r" (r) +#endif + +/** + \brief No Operation + \details No Operation does nothing. This instruction can be used for code alignment purposes. + */ +#define __NOP() __ASM volatile ("nop") + +/** + \brief Wait For Interrupt + \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. + */ +#define __WFI() __ASM volatile ("wfi":::"memory") + + +/** + \brief Wait For Event + \details Wait For Event is a hint instruction that permits the processor to enter + a low-power state until one of a number of events occurs. + */ +#define __WFE() __ASM volatile ("wfe":::"memory") + + +/** + \brief Send Event + \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. + */ +#define __SEV() __ASM volatile ("sev") + + +/** + \brief Instruction Synchronization Barrier + \details Instruction Synchronization Barrier flushes the pipeline in the processor, + so that all instructions following the ISB are fetched from cache or memory, + after the instruction has been completed. + */ +__STATIC_FORCEINLINE void __ISB(void) +{ + __ASM volatile ("isb 0xF":::"memory"); +} + + +/** + \brief Data Synchronization Barrier + \details Acts as a special kind of Data Memory Barrier. + It completes when all explicit memory accesses before this instruction complete. + */ +__STATIC_FORCEINLINE void __DSB(void) +{ + __ASM volatile ("dsb 0xF":::"memory"); +} + + +/** + \brief Data Memory Barrier + \details Ensures the apparent order of the explicit memory operations before + and after the instruction, without ensuring their completion. + */ +__STATIC_FORCEINLINE void __DMB(void) +{ + __ASM volatile ("dmb 0xF":::"memory"); +} + + +/** + \brief Reverse byte order (32 bit) + \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV(uint32_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) + return __builtin_bswap32(value); +#else + uint32_t result; + + __ASM ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __REV16(uint32_t value) +{ + uint32_t result; + + __ASM ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +} + + +/** + \brief Reverse byte order (16 bit) + \details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE int16_t __REVSH(int16_t value) +{ +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + return (int16_t)__builtin_bswap16(value); +#else + int16_t result; + + __ASM ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return result; +#endif +} + + +/** + \brief Rotate Right in unsigned value (32 bit) + \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. + \param [in] op1 Value to rotate + \param [in] op2 Number of Bits to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __ROR(uint32_t op1, uint32_t op2) +{ + op2 %= 32U; + if (op2 == 0U) + { + return op1; + } + return (op1 >> op2) | (op1 << (32U - op2)); +} + + +/** + \brief Breakpoint + \details Causes the processor to enter Debug state. + Debug tools can use this to investigate system state when the instruction at a particular address is reached. + \param [in] value is ignored by the processor. + If required, a debugger can use it to store additional information about the breakpoint. + */ +#define __BKPT(value) __ASM volatile ("bkpt "#value) + + +/** + \brief Reverse bit order of value + \details Reverses the bit order of the given value. + \param [in] value Value to reverse + \return Reversed value + */ +__STATIC_FORCEINLINE uint32_t __RBIT(uint32_t value) +{ + uint32_t result; + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) + __ASM ("rbit %0, %1" : "=r" (result) : "r" (value) ); +#else + uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */ + + result = value; /* r will be reversed bits of v; first get LSB of v */ + for (value >>= 1U; value != 0U; value >>= 1U) + { + result <<= 1U; + result |= value & 1U; + s--; + } + result <<= s; /* shift when v's highest bits are zero */ +#endif + return result; +} + + +/** + \brief Count leading zeros + \details Counts the number of leading zeros of a data value. + \param [in] value Value to count the leading zeros + \return number of leading zeros in value + */ +__STATIC_FORCEINLINE uint8_t __CLZ(uint32_t value) +{ + /* Even though __builtin_clz produces a CLZ instruction on ARM, formally + __builtin_clz(0) is undefined behaviour, so handle this case specially. + This guarantees ARM-compatible results if happening to compile on a non-ARM + target, and ensures the compiler doesn't decide to activate any + optimisations using the logic "value was passed to __builtin_clz, so it + is non-zero". + ARM GCC 7.3 and possibly earlier will optimise this test away, leaving a + single CLZ instruction. + */ + if (value == 0U) + { + return 32U; + } + return __builtin_clz(value); +} + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief LDR Exclusive (8 bit) + \details Executes a exclusive LDR instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDREXB(volatile uint8_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (16 bit) + \details Executes a exclusive LDR instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDREXH(volatile uint16_t *addr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDR Exclusive (32 bit) + \details Executes a exclusive LDR instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDREXW(volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); + return(result); +} + + +/** + \brief STR Exclusive (8 bit) + \details Executes a exclusive STR instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (16 bit) + \details Executes a exclusive STR instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) +{ + uint32_t result; + + __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); + return(result); +} + + +/** + \brief STR Exclusive (32 bit) + \details Executes a exclusive STR instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) +{ + uint32_t result; + + __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); + return(result); +} + + +/** + \brief Remove the exclusive lock + \details Removes the exclusive lock which is created by LDREX. + */ +__STATIC_FORCEINLINE void __CLREX(void) +{ + __ASM volatile ("clrex" ::: "memory"); +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (1..32) + \return Saturated value + */ +#define __SSAT(ARG1, ARG2) \ +__extension__ \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] ARG1 Value to be saturated + \param [in] ARG2 Bit position to saturate to (0..31) + \return Saturated value + */ +#define __USAT(ARG1, ARG2) \ + __extension__ \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + + +/** + \brief Rotate Right with Extend (32 bit) + \details Moves each bit of a bitstring right by one bit. + The carry input is shifted in at the left end of the bitstring. + \param [in] value Value to rotate + \return Rotated value + */ +__STATIC_FORCEINLINE uint32_t __RRX(uint32_t value) +{ + uint32_t result; + + __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); + return(result); +} + + +/** + \brief LDRT Unprivileged (8 bit) + \details Executes a Unprivileged LDRT instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDRBT(volatile uint8_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint8_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (16 bit) + \details Executes a Unprivileged LDRT instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDRHT(volatile uint16_t *ptr) +{ + uint32_t result; + +#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) + __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); +#else + /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not + accepted by assembler. So has to use following less efficient pattern. + */ + __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (ptr) : "memory" ); +#endif + return ((uint16_t) result); /* Add explicit type cast here */ +} + + +/** + \brief LDRT Unprivileged (32 bit) + \details Executes a Unprivileged LDRT instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDRT(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); + return(result); +} + + +/** + \brief STRT Unprivileged (8 bit) + \details Executes a Unprivileged STRT instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (16 bit) + \details Executes a Unprivileged STRT instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); +} + + +/** + \brief STRT Unprivileged (32 bit) + \details Executes a Unprivileged STRT instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STRT(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); +} + +#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + +/** + \brief Signed Saturate + \details Saturates a signed value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (1..32) + \return Saturated value + */ +__STATIC_FORCEINLINE int32_t __SSAT(int32_t val, uint32_t sat) +{ + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; +} + +/** + \brief Unsigned Saturate + \details Saturates an unsigned value. + \param [in] value Value to be saturated + \param [in] sat Bit position to saturate to (0..31) + \return Saturated value + */ +__STATIC_FORCEINLINE uint32_t __USAT(int32_t val, uint32_t sat) +{ + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; +} + +#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \ + (defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__ == 1)) || \ + (defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) ) */ + + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) +/** + \brief Load-Acquire (8 bit) + \details Executes a LDAB instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire (16 bit) + \details Executes a LDAH instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire (32 bit) + \details Executes a LDA instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDA(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release (8 bit) + \details Executes a STLB instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLB(uint8_t value, volatile uint8_t *ptr) +{ + __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (16 bit) + \details Executes a STLH instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STLH(uint16_t value, volatile uint16_t *ptr) +{ + __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Store-Release (32 bit) + \details Executes a STL instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + */ +__STATIC_FORCEINLINE void __STL(uint32_t value, volatile uint32_t *ptr) +{ + __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); +} + + +/** + \brief Load-Acquire Exclusive (8 bit) + \details Executes a LDAB exclusive instruction for 8 bit value. + \param [in] ptr Pointer to data + \return value of type uint8_t at (*ptr) + */ +__STATIC_FORCEINLINE uint8_t __LDAEXB(volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexb %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint8_t) result); +} + + +/** + \brief Load-Acquire Exclusive (16 bit) + \details Executes a LDAH exclusive instruction for 16 bit values. + \param [in] ptr Pointer to data + \return value of type uint16_t at (*ptr) + */ +__STATIC_FORCEINLINE uint16_t __LDAEXH(volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaexh %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return ((uint16_t) result); +} + + +/** + \brief Load-Acquire Exclusive (32 bit) + \details Executes a LDA exclusive instruction for 32 bit values. + \param [in] ptr Pointer to data + \return value of type uint32_t at (*ptr) + */ +__STATIC_FORCEINLINE uint32_t __LDAEX(volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("ldaex %0, %1" : "=r" (result) : "Q" (*ptr) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (8 bit) + \details Executes a STLB exclusive instruction for 8 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexb %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (16 bit) + \details Executes a STLH exclusive instruction for 16 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlexh %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + + +/** + \brief Store-Release Exclusive (32 bit) + \details Executes a STL exclusive instruction for 32 bit values. + \param [in] value Value to store + \param [in] ptr Pointer to location + \return 0 Function succeeded + \return 1 Function failed + */ +__STATIC_FORCEINLINE uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) +{ + uint32_t result; + + __ASM volatile ("stlex %0, %2, %1" : "=&r" (result), "=Q" (*ptr) : "r" ((uint32_t)value) : "memory" ); + return(result); +} + +#endif /* ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) */ + +/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ + + +/* ################### Compiler specific Intrinsics ########################### */ +/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics + Access to dedicated SIMD instructions + @{ +*/ + +#if (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1)) + +__STATIC_FORCEINLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + + +__STATIC_FORCEINLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#define __SSAT16(ARG1, ARG2) \ +({ \ + int32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + +#define __USAT16(ARG1, ARG2) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1); \ + __ASM volatile ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) : "cc" ); \ + __RES; \ + }) + +__STATIC_FORCEINLINE uint32_t __UXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16(uint32_t op1) +{ + uint32_t result; + + __ASM ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SXTB16_RORn(uint32_t op1, uint32_t rotate) +{ + uint32_t result; + + __ASM ("sxtb16 %0, %1, ROR %2" : "=r" (result) : "r" (op1), "i" (rotate) ); + + return result; +} + +__STATIC_FORCEINLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) +{ + uint32_t result; + + __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) +{ + union llreg_u{ + uint32_t w32[2]; + uint64_t w64; + } llr; + llr.w64 = acc; + +#ifndef __ARMEB__ /* Little endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); +#else /* Big endian */ + __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); +#endif + + return(llr.w64); +} + +__STATIC_FORCEINLINE uint32_t __SEL (uint32_t op1, uint32_t op2) +{ + uint32_t result; + + __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QADD( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +__STATIC_FORCEINLINE int32_t __QSUB( int32_t op1, int32_t op2) +{ + int32_t result; + + __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); + return(result); +} + +#if 0 +#define __PKHBT(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) + +#define __PKHTB(ARG1,ARG2,ARG3) \ +({ \ + uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ + if (ARG3 == 0) \ + __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ + else \ + __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ + __RES; \ + }) +#endif + +#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ + ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) + +#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ + ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) + +__STATIC_FORCEINLINE int32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) +{ + int32_t result; + + __ASM ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); + return(result); +} + +#endif /* (__ARM_FEATURE_DSP == 1) */ +/*@} end of group CMSIS_SIMD_intrinsics */ + + +#pragma GCC diagnostic pop + +#endif /* __CMSIS_GCC_H */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_iccarm.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_iccarm.h new file mode 100644 index 0000000000..0e46e4825a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_iccarm.h @@ -0,0 +1,968 @@ +/**************************************************************************//** + * @file cmsis_iccarm.h + * @brief CMSIS compiler ICCARM (IAR Compiler for Arm) header file + * @version V5.2.0 + * @date 28. January 2020 + ******************************************************************************/ + +//------------------------------------------------------------------------------ +// +// Copyright (c) 2017-2019 IAR Systems +// Copyright (c) 2017-2019 Arm Limited. All rights reserved. +// +// SPDX-License-Identifier: Apache-2.0 +// +// Licensed under the Apache License, Version 2.0 (the "License") +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +// +//------------------------------------------------------------------------------ + + +#ifndef __CMSIS_ICCARM_H__ +#define __CMSIS_ICCARM_H__ + +#ifndef __ICCARM__ + #error This file should only be compiled by ICCARM +#endif + +#pragma system_include + +#define __IAR_FT _Pragma("inline=forced") __intrinsic + +#if (__VER__ >= 8000000) + #define __ICCARM_V8 1 +#else + #define __ICCARM_V8 0 +#endif + +#ifndef __ALIGNED + #if __ICCARM_V8 + #define __ALIGNED(x) __attribute__((aligned(x))) + #elif (__VER__ >= 7080000) + /* Needs IAR language extensions */ + #define __ALIGNED(x) __attribute__((aligned(x))) + #else + #warning No compiler specific solution for __ALIGNED.__ALIGNED is ignored. + #define __ALIGNED(x) + #endif +#endif + + +/* Define compiler macros for CPU architecture, used in CMSIS 5. + */ +#if __ARM_ARCH_6M__ || __ARM_ARCH_7M__ || __ARM_ARCH_7EM__ || __ARM_ARCH_8M_BASE__ || __ARM_ARCH_8M_MAIN__ +/* Macros already defined */ +#else + #if defined(__ARM8M_MAINLINE__) || defined(__ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM_ARCH_PROFILE) && __ARM_ARCH_PROFILE == 'M' + #if __ARM_ARCH == 6 + #define __ARM_ARCH_6M__ 1 + #elif __ARM_ARCH == 7 + #if __ARM_FEATURE_DSP + #define __ARM_ARCH_7EM__ 1 + #else + #define __ARM_ARCH_7M__ 1 + #endif + #endif /* __ARM_ARCH */ + #endif /* __ARM_ARCH_PROFILE == 'M' */ +#endif + +/* Alternativ core deduction for older ICCARM's */ +#if !defined(__ARM_ARCH_6M__) && !defined(__ARM_ARCH_7M__) && !defined(__ARM_ARCH_7EM__) && \ + !defined(__ARM_ARCH_8M_BASE__) && !defined(__ARM_ARCH_8M_MAIN__) + #if defined(__ARM6M__) && (__CORE__ == __ARM6M__) + #define __ARM_ARCH_6M__ 1 + #elif defined(__ARM7M__) && (__CORE__ == __ARM7M__) + #define __ARM_ARCH_7M__ 1 + #elif defined(__ARM7EM__) && (__CORE__ == __ARM7EM__) + #define __ARM_ARCH_7EM__ 1 + #elif defined(__ARM8M_BASELINE__) && (__CORE == __ARM8M_BASELINE__) + #define __ARM_ARCH_8M_BASE__ 1 + #elif defined(__ARM8M_MAINLINE__) && (__CORE == __ARM8M_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #elif defined(__ARM8EM_MAINLINE__) && (__CORE == __ARM8EM_MAINLINE__) + #define __ARM_ARCH_8M_MAIN__ 1 + #else + #error "Unknown target." + #endif +#endif + + + +#if defined(__ARM_ARCH_6M__) && __ARM_ARCH_6M__==1 + #define __IAR_M0_FAMILY 1 +#elif defined(__ARM_ARCH_8M_BASE__) && __ARM_ARCH_8M_BASE__==1 + #define __IAR_M0_FAMILY 1 +#else + #define __IAR_M0_FAMILY 0 +#endif + + +#ifndef __ASM + #define __ASM __asm +#endif + +#ifndef __COMPILER_BARRIER + #define __COMPILER_BARRIER() __ASM volatile("":::"memory") +#endif + +#ifndef __INLINE + #define __INLINE inline +#endif + +#ifndef __NO_RETURN + #if __ICCARM_V8 + #define __NO_RETURN __attribute__((__noreturn__)) + #else + #define __NO_RETURN _Pragma("object_attribute=__noreturn") + #endif +#endif + +#ifndef __PACKED + #if __ICCARM_V8 + #define __PACKED __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED __packed + #endif +#endif + +#ifndef __PACKED_STRUCT + #if __ICCARM_V8 + #define __PACKED_STRUCT struct __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_STRUCT __packed struct + #endif +#endif + +#ifndef __PACKED_UNION + #if __ICCARM_V8 + #define __PACKED_UNION union __attribute__((packed, aligned(1))) + #else + /* Needs IAR language extensions */ + #define __PACKED_UNION __packed union + #endif +#endif + +#ifndef __RESTRICT + #if __ICCARM_V8 + #define __RESTRICT __restrict + #else + /* Needs IAR language extensions */ + #define __RESTRICT restrict + #endif +#endif + +#ifndef __STATIC_INLINE + #define __STATIC_INLINE static inline +#endif + +#ifndef __FORCEINLINE + #define __FORCEINLINE _Pragma("inline=forced") +#endif + +#ifndef __STATIC_FORCEINLINE + #define __STATIC_FORCEINLINE __FORCEINLINE __STATIC_INLINE +#endif + +#ifndef __UNALIGNED_UINT16_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint16_t __iar_uint16_read(void const *ptr) +{ + return *(__packed uint16_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT16_READ(PTR) __iar_uint16_read(PTR) +#endif + + +#ifndef __UNALIGNED_UINT16_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint16_write(void const *ptr, uint16_t val) +{ + *(__packed uint16_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT16_WRITE(PTR,VAL) __iar_uint16_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32_READ +#pragma language=save +#pragma language=extended +__IAR_FT uint32_t __iar_uint32_read(void const *ptr) +{ + return *(__packed uint32_t*)(ptr); +} +#pragma language=restore +#define __UNALIGNED_UINT32_READ(PTR) __iar_uint32_read(PTR) +#endif + +#ifndef __UNALIGNED_UINT32_WRITE +#pragma language=save +#pragma language=extended +__IAR_FT void __iar_uint32_write(void const *ptr, uint32_t val) +{ + *(__packed uint32_t*)(ptr) = val;; +} +#pragma language=restore +#define __UNALIGNED_UINT32_WRITE(PTR,VAL) __iar_uint32_write(PTR,VAL) +#endif + +#ifndef __UNALIGNED_UINT32 /* deprecated */ +#pragma language=save +#pragma language=extended +__packed struct __iar_u32 { uint32_t v; }; +#pragma language=restore +#define __UNALIGNED_UINT32(PTR) (((struct __iar_u32 *)(PTR))->v) +#endif + +#ifndef __USED + #if __ICCARM_V8 + #define __USED __attribute__((used)) + #else + #define __USED _Pragma("__root") + #endif +#endif + +#ifndef __WEAK + #if __ICCARM_V8 + #define __WEAK __attribute__((weak)) + #else + #define __WEAK _Pragma("__weak") + #endif +#endif + +#ifndef __PROGRAM_START +#define __PROGRAM_START __iar_program_start +#endif + +#ifndef __INITIAL_SP +#define __INITIAL_SP CSTACK$$Limit +#endif + +#ifndef __STACK_LIMIT +#define __STACK_LIMIT CSTACK$$Base +#endif + +#ifndef __VECTOR_TABLE +#define __VECTOR_TABLE __vector_table +#endif + +#ifndef __VECTOR_TABLE_ATTRIBUTE +#define __VECTOR_TABLE_ATTRIBUTE @".intvec" +#endif + +#ifndef __ICCARM_INTRINSICS_VERSION__ + #define __ICCARM_INTRINSICS_VERSION__ 0 +#endif + +#if __ICCARM_INTRINSICS_VERSION__ == 2 + + #if defined(__CLZ) + #undef __CLZ + #endif + #if defined(__REVSH) + #undef __REVSH + #endif + #if defined(__RBIT) + #undef __RBIT + #endif + #if defined(__SSAT) + #undef __SSAT + #endif + #if defined(__USAT) + #undef __USAT + #endif + + #include "iccarm_builtin.h" + + #define __disable_fault_irq __iar_builtin_disable_fiq + #define __disable_irq __iar_builtin_disable_interrupt + #define __enable_fault_irq __iar_builtin_enable_fiq + #define __enable_irq __iar_builtin_enable_interrupt + #define __arm_rsr __iar_builtin_rsr + #define __arm_wsr __iar_builtin_wsr + + + #define __get_APSR() (__arm_rsr("APSR")) + #define __get_BASEPRI() (__arm_rsr("BASEPRI")) + #define __get_CONTROL() (__arm_rsr("CONTROL")) + #define __get_FAULTMASK() (__arm_rsr("FAULTMASK")) + + #if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) ) + #define __get_FPSCR() (__arm_rsr("FPSCR")) + #define __set_FPSCR(VALUE) (__arm_wsr("FPSCR", (VALUE))) + #else + #define __get_FPSCR() ( 0 ) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #define __get_IPSR() (__arm_rsr("IPSR")) + #define __get_MSP() (__arm_rsr("MSP")) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __get_MSPLIM() (0U) + #else + #define __get_MSPLIM() (__arm_rsr("MSPLIM")) + #endif + #define __get_PRIMASK() (__arm_rsr("PRIMASK")) + #define __get_PSP() (__arm_rsr("PSP")) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __get_PSPLIM() (0U) + #else + #define __get_PSPLIM() (__arm_rsr("PSPLIM")) + #endif + + #define __get_xPSR() (__arm_rsr("xPSR")) + + #define __set_BASEPRI(VALUE) (__arm_wsr("BASEPRI", (VALUE))) + #define __set_BASEPRI_MAX(VALUE) (__arm_wsr("BASEPRI_MAX", (VALUE))) + #define __set_CONTROL(VALUE) (__arm_wsr("CONTROL", (VALUE))) + #define __set_FAULTMASK(VALUE) (__arm_wsr("FAULTMASK", (VALUE))) + #define __set_MSP(VALUE) (__arm_wsr("MSP", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + #define __set_MSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_MSPLIM(VALUE) (__arm_wsr("MSPLIM", (VALUE))) + #endif + #define __set_PRIMASK(VALUE) (__arm_wsr("PRIMASK", (VALUE))) + #define __set_PSP(VALUE) (__arm_wsr("PSP", (VALUE))) + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __set_PSPLIM(VALUE) ((void)(VALUE)) + #else + #define __set_PSPLIM(VALUE) (__arm_wsr("PSPLIM", (VALUE))) + #endif + + #define __TZ_get_CONTROL_NS() (__arm_rsr("CONTROL_NS")) + #define __TZ_set_CONTROL_NS(VALUE) (__arm_wsr("CONTROL_NS", (VALUE))) + #define __TZ_get_PSP_NS() (__arm_rsr("PSP_NS")) + #define __TZ_set_PSP_NS(VALUE) (__arm_wsr("PSP_NS", (VALUE))) + #define __TZ_get_MSP_NS() (__arm_rsr("MSP_NS")) + #define __TZ_set_MSP_NS(VALUE) (__arm_wsr("MSP_NS", (VALUE))) + #define __TZ_get_SP_NS() (__arm_rsr("SP_NS")) + #define __TZ_set_SP_NS(VALUE) (__arm_wsr("SP_NS", (VALUE))) + #define __TZ_get_PRIMASK_NS() (__arm_rsr("PRIMASK_NS")) + #define __TZ_set_PRIMASK_NS(VALUE) (__arm_wsr("PRIMASK_NS", (VALUE))) + #define __TZ_get_BASEPRI_NS() (__arm_rsr("BASEPRI_NS")) + #define __TZ_set_BASEPRI_NS(VALUE) (__arm_wsr("BASEPRI_NS", (VALUE))) + #define __TZ_get_FAULTMASK_NS() (__arm_rsr("FAULTMASK_NS")) + #define __TZ_set_FAULTMASK_NS(VALUE)(__arm_wsr("FAULTMASK_NS", (VALUE))) + + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + #define __TZ_get_PSPLIM_NS() (0U) + #define __TZ_set_PSPLIM_NS(VALUE) ((void)(VALUE)) + #else + #define __TZ_get_PSPLIM_NS() (__arm_rsr("PSPLIM_NS")) + #define __TZ_set_PSPLIM_NS(VALUE) (__arm_wsr("PSPLIM_NS", (VALUE))) + #endif + + #define __TZ_get_MSPLIM_NS() (__arm_rsr("MSPLIM_NS")) + #define __TZ_set_MSPLIM_NS(VALUE) (__arm_wsr("MSPLIM_NS", (VALUE))) + + #define __NOP __iar_builtin_no_operation + + #define __CLZ __iar_builtin_CLZ + #define __CLREX __iar_builtin_CLREX + + #define __DMB __iar_builtin_DMB + #define __DSB __iar_builtin_DSB + #define __ISB __iar_builtin_ISB + + #define __LDREXB __iar_builtin_LDREXB + #define __LDREXH __iar_builtin_LDREXH + #define __LDREXW __iar_builtin_LDREX + + #define __RBIT __iar_builtin_RBIT + #define __REV __iar_builtin_REV + #define __REV16 __iar_builtin_REV16 + + __IAR_FT int16_t __REVSH(int16_t val) + { + return (int16_t) __iar_builtin_REVSH(val); + } + + #define __ROR __iar_builtin_ROR + #define __RRX __iar_builtin_RRX + + #define __SEV __iar_builtin_SEV + + #if !__IAR_M0_FAMILY + #define __SSAT __iar_builtin_SSAT + #endif + + #define __STREXB __iar_builtin_STREXB + #define __STREXH __iar_builtin_STREXH + #define __STREXW __iar_builtin_STREX + + #if !__IAR_M0_FAMILY + #define __USAT __iar_builtin_USAT + #endif + + #define __WFE __iar_builtin_WFE + #define __WFI __iar_builtin_WFI + + #if __ARM_MEDIA__ + #define __SADD8 __iar_builtin_SADD8 + #define __QADD8 __iar_builtin_QADD8 + #define __SHADD8 __iar_builtin_SHADD8 + #define __UADD8 __iar_builtin_UADD8 + #define __UQADD8 __iar_builtin_UQADD8 + #define __UHADD8 __iar_builtin_UHADD8 + #define __SSUB8 __iar_builtin_SSUB8 + #define __QSUB8 __iar_builtin_QSUB8 + #define __SHSUB8 __iar_builtin_SHSUB8 + #define __USUB8 __iar_builtin_USUB8 + #define __UQSUB8 __iar_builtin_UQSUB8 + #define __UHSUB8 __iar_builtin_UHSUB8 + #define __SADD16 __iar_builtin_SADD16 + #define __QADD16 __iar_builtin_QADD16 + #define __SHADD16 __iar_builtin_SHADD16 + #define __UADD16 __iar_builtin_UADD16 + #define __UQADD16 __iar_builtin_UQADD16 + #define __UHADD16 __iar_builtin_UHADD16 + #define __SSUB16 __iar_builtin_SSUB16 + #define __QSUB16 __iar_builtin_QSUB16 + #define __SHSUB16 __iar_builtin_SHSUB16 + #define __USUB16 __iar_builtin_USUB16 + #define __UQSUB16 __iar_builtin_UQSUB16 + #define __UHSUB16 __iar_builtin_UHSUB16 + #define __SASX __iar_builtin_SASX + #define __QASX __iar_builtin_QASX + #define __SHASX __iar_builtin_SHASX + #define __UASX __iar_builtin_UASX + #define __UQASX __iar_builtin_UQASX + #define __UHASX __iar_builtin_UHASX + #define __SSAX __iar_builtin_SSAX + #define __QSAX __iar_builtin_QSAX + #define __SHSAX __iar_builtin_SHSAX + #define __USAX __iar_builtin_USAX + #define __UQSAX __iar_builtin_UQSAX + #define __UHSAX __iar_builtin_UHSAX + #define __USAD8 __iar_builtin_USAD8 + #define __USADA8 __iar_builtin_USADA8 + #define __SSAT16 __iar_builtin_SSAT16 + #define __USAT16 __iar_builtin_USAT16 + #define __UXTB16 __iar_builtin_UXTB16 + #define __UXTAB16 __iar_builtin_UXTAB16 + #define __SXTB16 __iar_builtin_SXTB16 + #define __SXTAB16 __iar_builtin_SXTAB16 + #define __SMUAD __iar_builtin_SMUAD + #define __SMUADX __iar_builtin_SMUADX + #define __SMMLA __iar_builtin_SMMLA + #define __SMLAD __iar_builtin_SMLAD + #define __SMLADX __iar_builtin_SMLADX + #define __SMLALD __iar_builtin_SMLALD + #define __SMLALDX __iar_builtin_SMLALDX + #define __SMUSD __iar_builtin_SMUSD + #define __SMUSDX __iar_builtin_SMUSDX + #define __SMLSD __iar_builtin_SMLSD + #define __SMLSDX __iar_builtin_SMLSDX + #define __SMLSLD __iar_builtin_SMLSLD + #define __SMLSLDX __iar_builtin_SMLSLDX + #define __SEL __iar_builtin_SEL + #define __QADD __iar_builtin_QADD + #define __QSUB __iar_builtin_QSUB + #define __PKHBT __iar_builtin_PKHBT + #define __PKHTB __iar_builtin_PKHTB + #endif + +#else /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #define __CLZ __cmsis_iar_clz_not_active + #define __SSAT __cmsis_iar_ssat_not_active + #define __USAT __cmsis_iar_usat_not_active + #define __RBIT __cmsis_iar_rbit_not_active + #define __get_APSR __cmsis_iar_get_APSR_not_active + #endif + + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #define __get_FPSCR __cmsis_iar_get_FPSR_not_active + #define __set_FPSCR __cmsis_iar_set_FPSR_not_active + #endif + + #ifdef __INTRINSICS_INCLUDED + #error intrinsics.h is already included previously! + #endif + + #include <intrinsics.h> + + #if __IAR_M0_FAMILY + /* Avoid clash between intrinsics.h and arm_math.h when compiling for Cortex-M0. */ + #undef __CLZ + #undef __SSAT + #undef __USAT + #undef __RBIT + #undef __get_APSR + + __STATIC_INLINE uint8_t __CLZ(uint32_t data) + { + if (data == 0U) { return 32U; } + + uint32_t count = 0U; + uint32_t mask = 0x80000000U; + + while ((data & mask) == 0U) + { + count += 1U; + mask = mask >> 1U; + } + return count; + } + + __STATIC_INLINE uint32_t __RBIT(uint32_t v) + { + uint8_t sc = 31U; + uint32_t r = v; + for (v >>= 1U; v; v >>= 1U) + { + r <<= 1U; + r |= v & 1U; + sc--; + } + return (r << sc); + } + + __STATIC_INLINE uint32_t __get_APSR(void) + { + uint32_t res; + __asm("MRS %0,APSR" : "=r" (res)); + return res; + } + + #endif + + #if (!((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \ + (defined (__FPU_USED ) && (__FPU_USED == 1U)) )) + #undef __get_FPSCR + #undef __set_FPSCR + #define __get_FPSCR() (0) + #define __set_FPSCR(VALUE) ((void)VALUE) + #endif + + #pragma diag_suppress=Pe940 + #pragma diag_suppress=Pe177 + + #define __enable_irq __enable_interrupt + #define __disable_irq __disable_interrupt + #define __NOP __no_operation + + #define __get_xPSR __get_PSR + + #if (!defined(__ARM_ARCH_6M__) || __ARM_ARCH_6M__==0) + + __IAR_FT uint32_t __LDREXW(uint32_t volatile *ptr) + { + return __LDREX((unsigned long *)ptr); + } + + __IAR_FT uint32_t __STREXW(uint32_t value, uint32_t volatile *ptr) + { + return __STREX(value, (unsigned long *)ptr); + } + #endif + + + /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + #if (__CORTEX_M >= 0x03) + + __IAR_FT uint32_t __RRX(uint32_t value) + { + uint32_t result; + __ASM volatile("RRX %0, %1" : "=r"(result) : "r" (value)); + return(result); + } + + __IAR_FT void __set_BASEPRI_MAX(uint32_t value) + { + __asm volatile("MSR BASEPRI_MAX,%0"::"r" (value)); + } + + + #define __enable_fault_irq __enable_fiq + #define __disable_fault_irq __disable_fiq + + + #endif /* (__CORTEX_M >= 0x03) */ + + __IAR_FT uint32_t __ROR(uint32_t op1, uint32_t op2) + { + return (op1 >> op2) | (op1 << ((sizeof(op1)*8)-op2)); + } + + #if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + __IAR_FT uint32_t __get_MSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,MSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_MSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure MSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR MSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __get_PSPLIM(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __set_PSPLIM(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_CONTROL_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,CONTROL_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_CONTROL_NS(uint32_t value) + { + __asm volatile("MSR CONTROL_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PSP_NS(uint32_t value) + { + __asm volatile("MSR PSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_MSP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSP_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSP_NS(uint32_t value) + { + __asm volatile("MSR MSP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_SP_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,SP_NS" : "=r" (res)); + return res; + } + __IAR_FT void __TZ_set_SP_NS(uint32_t value) + { + __asm volatile("MSR SP_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PRIMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,PRIMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_PRIMASK_NS(uint32_t value) + { + __asm volatile("MSR PRIMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_BASEPRI_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,BASEPRI_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_BASEPRI_NS(uint32_t value) + { + __asm volatile("MSR BASEPRI_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_FAULTMASK_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,FAULTMASK_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_FAULTMASK_NS(uint32_t value) + { + __asm volatile("MSR FAULTMASK_NS,%0" :: "r" (value)); + } + + __IAR_FT uint32_t __TZ_get_PSPLIM_NS(void) + { + uint32_t res; + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + res = 0U; + #else + __asm volatile("MRS %0,PSPLIM_NS" : "=r" (res)); + #endif + return res; + } + + __IAR_FT void __TZ_set_PSPLIM_NS(uint32_t value) + { + #if (!(defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) && \ + (!defined (__ARM_FEATURE_CMSE ) || (__ARM_FEATURE_CMSE < 3))) + // without main extensions, the non-secure PSPLIM is RAZ/WI + (void)value; + #else + __asm volatile("MSR PSPLIM_NS,%0" :: "r" (value)); + #endif + } + + __IAR_FT uint32_t __TZ_get_MSPLIM_NS(void) + { + uint32_t res; + __asm volatile("MRS %0,MSPLIM_NS" : "=r" (res)); + return res; + } + + __IAR_FT void __TZ_set_MSPLIM_NS(uint32_t value) + { + __asm volatile("MSR MSPLIM_NS,%0" :: "r" (value)); + } + + #endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#endif /* __ICCARM_INTRINSICS_VERSION__ == 2 */ + +#define __BKPT(value) __asm volatile ("BKPT %0" : : "i"(value)) + +#if __IAR_M0_FAMILY + __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat) + { + if ((sat >= 1U) && (sat <= 32U)) + { + const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U); + const int32_t min = -1 - max ; + if (val > max) + { + return max; + } + else if (val < min) + { + return min; + } + } + return val; + } + + __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat) + { + if (sat <= 31U) + { + const uint32_t max = ((1U << sat) - 1U); + if (val > (int32_t)max) + { + return max; + } + else if (val < 0) + { + return 0U; + } + } + return (uint32_t)val; + } +#endif + +#if (__CORTEX_M >= 0x03) /* __CORTEX_M is defined in core_cm0.h, core_cm3.h and core_cm4.h. */ + + __IAR_FT uint8_t __LDRBT(volatile uint8_t *addr) + { + uint32_t res; + __ASM volatile ("LDRBT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDRHT(volatile uint16_t *addr) + { + uint32_t res; + __ASM volatile ("LDRHT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDRT(volatile uint32_t *addr) + { + uint32_t res; + __ASM volatile ("LDRT %0, [%1]" : "=r" (res) : "r" (addr) : "memory"); + return res; + } + + __IAR_FT void __STRBT(uint8_t value, volatile uint8_t *addr) + { + __ASM volatile ("STRBT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRHT(uint16_t value, volatile uint16_t *addr) + { + __ASM volatile ("STRHT %1, [%0]" : : "r" (addr), "r" ((uint32_t)value) : "memory"); + } + + __IAR_FT void __STRT(uint32_t value, volatile uint32_t *addr) + { + __ASM volatile ("STRT %1, [%0]" : : "r" (addr), "r" (value) : "memory"); + } + +#endif /* (__CORTEX_M >= 0x03) */ + +#if ((defined (__ARM_ARCH_8M_MAIN__ ) && (__ARM_ARCH_8M_MAIN__ == 1)) || \ + (defined (__ARM_ARCH_8M_BASE__ ) && (__ARM_ARCH_8M_BASE__ == 1)) ) + + + __IAR_FT uint8_t __LDAB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDA(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDA %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT void __STLB(uint8_t value, volatile uint8_t *ptr) + { + __ASM volatile ("STLB %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STLH(uint16_t value, volatile uint16_t *ptr) + { + __ASM volatile ("STLH %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT void __STL(uint32_t value, volatile uint32_t *ptr) + { + __ASM volatile ("STL %1, [%0]" :: "r" (ptr), "r" (value) : "memory"); + } + + __IAR_FT uint8_t __LDAEXB(volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXB %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint8_t)res); + } + + __IAR_FT uint16_t __LDAEXH(volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEXH %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return ((uint16_t)res); + } + + __IAR_FT uint32_t __LDAEX(volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("LDAEX %0, [%1]" : "=r" (res) : "r" (ptr) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXB(uint8_t value, volatile uint8_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXB %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEXH(uint16_t value, volatile uint16_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEXH %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + + __IAR_FT uint32_t __STLEX(uint32_t value, volatile uint32_t *ptr) + { + uint32_t res; + __ASM volatile ("STLEX %0, %2, [%1]" : "=r" (res) : "r" (ptr), "r" (value) : "memory"); + return res; + } + +#endif /* __ARM_ARCH_8M_MAIN__ or __ARM_ARCH_8M_BASE__ */ + +#undef __IAR_FT +#undef __IAR_M0_FAMILY +#undef __ICCARM_V8 + +#pragma diag_default=Pe940 +#pragma diag_default=Pe177 + +#define __SXTB16_RORn(ARG1, ARG2) __SXTB16(__ROR(ARG1, ARG2)) + +#endif /* __CMSIS_ICCARM_H__ */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_version.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_version.h new file mode 100644 index 0000000000..2f048e4552 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/cmsis_version.h @@ -0,0 +1,39 @@ +/**************************************************************************//** + * @file cmsis_version.h + * @brief CMSIS Core(M) Version definitions + * @version V5.0.4 + * @date 23. July 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 ARM Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CMSIS_VERSION_H +#define __CMSIS_VERSION_H + +/* CMSIS Version definitions */ +#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */ +#define __CM_CMSIS_VERSION_SUB ( 4U) /*!< [15:0] CMSIS Core(M) sub version */ +#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \ + __CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */ +#endif diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv81mml.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv81mml.h new file mode 100644 index 0000000000..fd9ca0a737 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv81mml.h @@ -0,0 +1,4191 @@ +/**************************************************************************//** + * @file core_armv81mml.h + * @brief CMSIS Armv8.1-M Mainline Core Peripheral Access Layer Header File + * @version V1.3.1 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2018-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV81MML_H_GENERIC +#define __CORE_ARMV81MML_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMV81MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS ARMV81MML definitions */ +#define __ARMv81MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv81MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv81MML_CMSIS_VERSION ((__ARMv81MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv81MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (81U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV81MML_H_DEPENDANT +#define __CORE_ARMV81MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv81MML_REV + #define __ARMv81MML_REV 0x0000U + #warning "__ARMv81MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 2U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 31 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv81MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[4]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 3 */ + uint32_t RESERVED14[3]; + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (16UL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (16UL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (8UL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (6UL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV81MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv8mbl.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv8mbl.h new file mode 100644 index 0000000000..e9c9b5bf59 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv8mbl.h @@ -0,0 +1,2222 @@ +/**************************************************************************//** + * @file core_armv8mbl.h + * @brief CMSIS Armv8-M Baseline Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV8MBL_H_GENERIC +#define __CORE_ARMV8MBL_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MBL + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __ARMv8MBL_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MBL_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MBL_CMSIS_VERSION ((__ARMv8MBL_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MBL_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (2U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MBL_H_DEPENDANT +#define __CORE_ARMV8MBL_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MBL_REV + #define __ARMv8MBL_REV 0x0000U + #warning "__ARMv8MBL_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MBL */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< \deprecated CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MBL_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv8mml.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv8mml.h new file mode 100644 index 0000000000..23bf8ab4ee --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_armv8mml.h @@ -0,0 +1,3196 @@ +/**************************************************************************//** + * @file core_armv8mml.h + * @brief CMSIS Armv8-M Mainline Core Peripheral Access Layer Header File + * @version V5.2.0 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_ARMV8MML_H_GENERIC +#define __CORE_ARMV8MML_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_ARMv8MML + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS Armv8MML definitions */ +#define __ARMv8MML_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __ARMv8MML_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __ARMv8MML_CMSIS_VERSION ((__ARMv8MML_CMSIS_VERSION_MAIN << 16U) | \ + __ARMv8MML_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (80U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_ARMV8MML_H_DEPENDANT +#define __CORE_ARMV8MML_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __ARMv8MML_REV + #define __ARMv8MML_REV 0x0000U + #warning "__ARMv8MML_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group ARMv8MML */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_ARMV8MML_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm0.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm0.h new file mode 100644 index 0000000000..0a0ba223e1 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm0.h @@ -0,0 +1,952 @@ +/**************************************************************************//** + * @file core_cm0.h + * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File + * @version V5.0.8 + * @date 21. August 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0_H_GENERIC +#define __CORE_CM0_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M0 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0 definitions */ +#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ + __CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0_H_DEPENDANT +#define __CORE_CM0_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0_REV + #define __CM0_REV 0x0000U + #warning "__CM0_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M0 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + *(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */ + /* ARM Application Note 321 states that the M0 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */ +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm0plus.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm0plus.h new file mode 100644 index 0000000000..879a384124 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm0plus.h @@ -0,0 +1,1087 @@ +/**************************************************************************//** + * @file core_cm0plus.h + * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File + * @version V5.0.9 + * @date 21. August 2019 + ******************************************************************************/ +/* + * Copyright (c) 2009-2019 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM0PLUS_H_GENERIC +#define __CORE_CM0PLUS_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex-M0+ + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM0+ definitions */ +#define __CM0PLUS_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM0PLUS_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ + __CM0PLUS_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (0U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM0PLUS_H_DEPENDANT +#define __CORE_CM0PLUS_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM0PLUS_REV + #define __CM0PLUS_REV 0x0000U + #warning "__CM0PLUS_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex-M0+ */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M0+ header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0+ */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; +#else + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + *(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */ +#endif + /* ARM Application Note 321 states that the M0+ does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +#else + uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */ + return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */ +#endif +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM0PLUS_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm1.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm1.h new file mode 100644 index 0000000000..83b8fc6a0d --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm1.h @@ -0,0 +1,979 @@ +/**************************************************************************//** + * @file core_cm1.h + * @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File + * @version V1.0.1 + * @date 12. November 2018 + ******************************************************************************/ +/* + * Copyright (c) 2009-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM1_H_GENERIC +#define __CORE_CM1_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M1 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM1 definitions */ +#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \ + __CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (1U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM1_H_DEPENDANT +#define __CORE_CM1_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM1_REV + #define __CM1_REV 0x0100U + #warning "__CM1_REV not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M1 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + uint32_t RESERVED0; + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */ + +#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */ +#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the Cortex-M1 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + Address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)0x0U; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M1 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)0x0U; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM1_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm23.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm23.h new file mode 100644 index 0000000000..f2cf49fb16 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm23.h @@ -0,0 +1,2297 @@ +/**************************************************************************//** + * @file core_cm23.h + * @brief CMSIS Cortex-M23 Core Peripheral Access Layer Header File + * @version V5.1.0 + * @date 11. February 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM23_H_GENERIC +#define __CORE_CM23_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M23 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS definitions */ +#define __CM23_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM23_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM23_CMSIS_VERSION ((__CM23_CMSIS_VERSION_MAIN << 16U) | \ + __CM23_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (23U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM23_H_DEPENDANT +#define __CORE_CM23_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM23_REV + #define __CM23_REV 0x0000U + #warning "__CM23_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif + + #ifndef __ETM_PRESENT + #define __ETM_PRESENT 0U + #warning "__ETM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MTB_PRESENT + #define __MTB_PRESENT 0U + #warning "__MTB_PRESENT not defined in device header file; using default!" + #endif + +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M23 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint32_t IPR[124U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ +#else + uint32_t RESERVED0; +#endif + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED1; + __IOM uint32_t SHPR[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + uint32_t RESERVED0[6U]; + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x3UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + uint32_t RESERVED0[7U]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 1U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: EN Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: EN Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#endif +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_DWTENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: DWTENA Position */ +#define CoreDebug_DEMCR_DWTENA_Msk (1UL << CoreDebug_DEMCR_DWTENA_Pos) /*!< \deprecated CoreDebug DEMCR: DWTENA Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for Cortex-M23 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for Cortex-M23 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + +#define __NVIC_SetPriorityGrouping(X) (void)(X) +#define __NVIC_GetPriorityGrouping() (0U) + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + If VTOR is not present address 0 must be mapped to SRAM. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ +#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1U) + uint32_t *vectors = (uint32_t *)SCB->VTOR; +#else + uint32_t *vectors = (uint32_t *)0x0U; +#endif + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[_IP_IDX(IRQn)] = ((uint32_t)(NVIC_NS->IPR[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB_NS->SHPR[_SHP_IDX(IRQn)] = ((uint32_t)(SCB_NS->SHPR[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IPR[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB_NS->SHPR[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM23_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm3.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm3.h new file mode 100644 index 0000000000..36502e1b65 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm3.h @@ -0,0 +1,1943 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM3_H_GENERIC +#define __CORE_CM3_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M3 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM3 definitions */ +#define __CM3_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ + __CM3_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (3U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM3_H_DEPENDANT +#define __CORE_CM3_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM3_REV + #define __CM3_REV 0x0200U + #warning "__CM3_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M3 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV < 0x0201U) /* core r2p1 */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#else +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ +#endif + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +#else + uint32_t RESERVED1[1U]; +#endif +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#if defined (__CM3_REV) && (__CM3_REV >= 0x200U) +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ +#endif + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM3_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm33.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm33.h new file mode 100644 index 0000000000..1e0159cdd0 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm33.h @@ -0,0 +1,3264 @@ +/**************************************************************************//** + * @file core_cm33.h + * @brief CMSIS Cortex-M33 Core Peripheral Access Layer Header File + * @version V5.2.0 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM33_H_GENERIC +#define __CORE_CM33_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M33 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM33 definitions */ +#define __CM33_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM33_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM33_CMSIS_VERSION ((__CM33_CMSIS_VERSION_MAIN << 16U) | \ + __CM33_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (33U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM33_H_DEPENDANT +#define __CORE_CM33_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM33_REV + #define __CM33_REV 0x0000U + #warning "__CM33_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M33 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM33_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm35p.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm35p.h new file mode 100644 index 0000000000..2ab752c927 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm35p.h @@ -0,0 +1,3264 @@ +/**************************************************************************//** + * @file core_cm35p.h + * @brief CMSIS Cortex-M35P Core Peripheral Access Layer Header File + * @version V1.1.0 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2018-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM35P_H_GENERIC +#define __CORE_CM35P_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M35P + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM35P definitions */ +#define __CM35P_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM35P_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM35P_CMSIS_VERSION ((__CM35P_CMSIS_VERSION_MAIN << 16U) | \ + __CM35P_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (35U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined (__TARGET_FPU_VFP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined (__ARM_FP) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined (__ARMVFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1U) + #if defined (__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined (__TI_VFP_SUPPORT__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined (__FPU_VFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM35P_H_DEPENDANT +#define __CORE_CM35P_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM35P_REV + #define __CM35P_REV 0x0000U + #warning "__CM35P_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M35P */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CPn_Pos 0U /*!< SCB NSACR: CPn Position */ +#define SCB_NSACR_CPn_Msk (1UL /*<< SCB_NSACR_CPn_Pos*/) /*!< SCB NSACR: CPn Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[4U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t ITFTTD0; /*!< Offset: 0xEEC (R/ ) Integration Test FIFO Test Data 0 Register */ + __IOM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/W) Integration Test ATB Control Register 2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) Integration Test ATB Control Register 0 */ + __IM uint32_t ITFTTD1; /*!< Offset: 0xEFC (R/ ) Integration Test FIFO Test Data 1 Register */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) Device Configuration Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Identifier Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration Test FIFO Test Data 0 Register Definitions */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD0: ATB Interface 2 ATVALIDPosition */ +#define TPI_ITFTTD0_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD0: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD0_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD0_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD0: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD0_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD0: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD0_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD0_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD0: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data2_Pos 16U /*!< TPI ITFTTD0: ATB Interface 1 data2 Position */ +#define TPI_ITFTTD0_ATB_IF1_data2_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data2 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data1_Pos 8U /*!< TPI ITFTTD0: ATB Interface 1 data1 Position */ +#define TPI_ITFTTD0_ATB_IF1_data1_Msk (0xFFUL << TPI_ITFTTD0_ATB_IF1_data1_Pos) /*!< TPI ITFTTD0: ATB Interface 1 data1 Mask */ + +#define TPI_ITFTTD0_ATB_IF1_data0_Pos 0U /*!< TPI ITFTTD0: ATB Interface 1 data0 Position */ +#define TPI_ITFTTD0_ATB_IF1_data0_Msk (0xFFUL /*<< TPI_ITFTTD0_ATB_IF1_data0_Pos*/) /*!< TPI ITFTTD0: ATB Interface 1 data0 Mask */ + +/* TPI Integration Test ATB Control Register 2 Register Definitions */ +#define TPI_ITATBCTR2_AFVALID2S_Pos 1U /*!< TPI ITATBCTR2: AFVALID2S Position */ +#define TPI_ITATBCTR2_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID2S_Pos) /*!< TPI ITATBCTR2: AFVALID2SS Mask */ + +#define TPI_ITATBCTR2_AFVALID1S_Pos 1U /*!< TPI ITATBCTR2: AFVALID1S Position */ +#define TPI_ITATBCTR2_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR2_AFVALID1S_Pos) /*!< TPI ITATBCTR2: AFVALID1SS Mask */ + +#define TPI_ITATBCTR2_ATREADY2S_Pos 0U /*!< TPI ITATBCTR2: ATREADY2S Position */ +#define TPI_ITATBCTR2_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2S_Pos*/) /*!< TPI ITATBCTR2: ATREADY2S Mask */ + +#define TPI_ITATBCTR2_ATREADY1S_Pos 0U /*!< TPI ITATBCTR2: ATREADY1S Position */ +#define TPI_ITATBCTR2_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1S_Pos*/) /*!< TPI ITATBCTR2: ATREADY1S Mask */ + +/* TPI Integration Test FIFO Test Data 1 Register Definitions */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Pos 29U /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF2_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 2 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF2_bytecount_Pos 27U /*!< TPI ITFTTD1: ATB Interface 2 byte count Position */ +#define TPI_ITFTTD1_ATB_IF2_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF2_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 2 byte count Mask */ + +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Pos 26U /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Position */ +#define TPI_ITFTTD1_ATB_IF1_ATVALID_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_ATVALID_Pos) /*!< TPI ITFTTD1: ATB Interface 1 ATVALID Mask */ + +#define TPI_ITFTTD1_ATB_IF1_bytecount_Pos 24U /*!< TPI ITFTTD1: ATB Interface 1 byte count Position */ +#define TPI_ITFTTD1_ATB_IF1_bytecount_Msk (0x3UL << TPI_ITFTTD1_ATB_IF1_bytecount_Pos) /*!< TPI ITFTTD1: ATB Interface 1 byte countt Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data2_Pos 16U /*!< TPI ITFTTD1: ATB Interface 2 data2 Position */ +#define TPI_ITFTTD1_ATB_IF2_data2_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data2 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data1_Pos 8U /*!< TPI ITFTTD1: ATB Interface 2 data1 Position */ +#define TPI_ITFTTD1_ATB_IF2_data1_Msk (0xFFUL << TPI_ITFTTD1_ATB_IF2_data1_Pos) /*!< TPI ITFTTD1: ATB Interface 2 data1 Mask */ + +#define TPI_ITFTTD1_ATB_IF2_data0_Pos 0U /*!< TPI ITFTTD1: ATB Interface 2 data0 Position */ +#define TPI_ITFTTD1_ATB_IF2_data0_Msk (0xFFUL /*<< TPI_ITFTTD1_ATB_IF2_data0_Pos*/) /*!< TPI ITFTTD1: ATB Interface 2 data0 Mask */ + +/* TPI Integration Test ATB Control Register 0 Definitions */ +#define TPI_ITATBCTR0_AFVALID2S_Pos 1U /*!< TPI ITATBCTR0: AFVALID2S Position */ +#define TPI_ITATBCTR0_AFVALID2S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID2S_Pos) /*!< TPI ITATBCTR0: AFVALID2SS Mask */ + +#define TPI_ITATBCTR0_AFVALID1S_Pos 1U /*!< TPI ITATBCTR0: AFVALID1S Position */ +#define TPI_ITATBCTR0_AFVALID1S_Msk (0x1UL << TPI_ITATBCTR0_AFVALID1S_Pos) /*!< TPI ITATBCTR0: AFVALID1SS Mask */ + +#define TPI_ITATBCTR0_ATREADY2S_Pos 0U /*!< TPI ITATBCTR0: ATREADY2S Position */ +#define TPI_ITATBCTR0_ATREADY2S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2S_Pos*/) /*!< TPI ITATBCTR0: ATREADY2S Mask */ + +#define TPI_ITATBCTR0_ATREADY1S_Pos 0U /*!< TPI ITATBCTR0: ATREADY1S Position */ +#define TPI_ITATBCTR0_ATREADY1S_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1S_Pos*/) /*!< TPI ITATBCTR0: ATREADY1S Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFOSZ Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFOSZ Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x3FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (0x7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM35P_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm4.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm4.h new file mode 100644 index 0000000000..d796173adf --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm4.h @@ -0,0 +1,2129 @@ +/**************************************************************************//** + * @file core_cm4.h + * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File + * @version V5.1.1 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM4_H_GENERIC +#define __CORE_CM4_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M4 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM4 definitions */ +#define __CM4_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM4_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ + __CM4_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (4U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM4_H_DEPENDANT +#define __CORE_CM4_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM4_REV + #define __CM4_REV 0x0000U + #warning "__CM4_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M4 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ +#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ + +#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ +#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M4 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM4_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm55.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm55.h new file mode 100644 index 0000000000..af186143db --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm55.h @@ -0,0 +1,4215 @@ +/**************************************************************************//** + * @file core_cm55.h + * @brief CMSIS Cortex-M55 Core Peripheral Access Layer Header File + * @version V1.0.0 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2018-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#elif defined ( __GNUC__ ) + #pragma GCC diagnostic ignored "-Wpedantic" /* disable pedantic warning due to unnamed structs/unions */ +#endif + +#ifndef __CORE_CM55_H_GENERIC +#define __CORE_CM55_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_CM55 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM55 definitions */ +#define __CM55_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM55_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM55_CMSIS_VERSION ((__CM55_CMSIS_VERSION_MAIN << 16U) | \ + __CM55_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (55U) /*!< Cortex-M Core */ + +#if defined ( __CC_ARM ) + #error Legacy Arm Compiler does not support Armv8.1-M target architecture. +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + + #if defined(__ARM_FEATURE_DSP) + #if defined(__DSP_PRESENT) && (__DSP_PRESENT == 1U) + #define __DSP_USED 1U + #else + #error "Compiler generates DSP (SIMD) instructions for a devices without DSP extensions (check __DSP_PRESENT)" + #define __DSP_USED 0U + #endif + #else + #define __DSP_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM55_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM55_H_DEPENDANT +#define __CORE_CM55_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM55_REV + #define __CM55_REV 0x0000U + #warning "__CM55_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #if __FPU_PRESENT != 0U + #ifndef __FPU_DP + #define __FPU_DP 0U + #warning "__FPU_DP not defined in device header file; using default!" + #endif + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __PMU_PRESENT + #define __PMU_PRESENT 0U + #warning "__PMU_PRESENT not defined in device header file; using default!" + #endif + + #if __PMU_PRESENT != 0U + #ifndef __PMU_NUM_EVENTCNT + #define __PMU_NUM_EVENTCNT 8U + #warning "__PMU_NUM_EVENTCNT not defined in device header file; using default!" + #elif (__PMU_NUM_EVENTCNT > 8 || __PMU_NUM_EVENTCNT < 2) + #error "__PMU_NUM_EVENTCNT is out of range in device header file!" */ + #endif + #endif + + #ifndef __SAUREGION_PRESENT + #define __SAUREGION_PRESENT 0U + #warning "__SAUREGION_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DSP_PRESENT + #define __DSP_PRESENT 0U + #warning "__DSP_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M55 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core SAU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ +#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack-pointer select */ + uint32_t FPCA:1; /*!< bit: 2 Floating-point context active */ + uint32_t SFPA:1; /*!< bit: 3 Secure floating-point active */ + uint32_t _reserved1:28; /*!< bit: 4..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SFPA_Pos 3U /*!< CONTROL: SFPA Position */ +#define CONTROL_SFPA_Msk (1UL << CONTROL_SFPA_Pos) /*!< CONTROL: SFPA Mask */ + +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[16U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[16U]; + __IOM uint32_t ICER[16U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[16U]; + __IOM uint32_t ISPR[16U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[16U]; + __IOM uint32_t ICPR[16U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[16U]; + __IOM uint32_t IABR[16U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[16U]; + __IOM uint32_t ITNS[16U]; /*!< Offset: 0x280 (R/W) Interrupt Non-Secure State Register */ + uint32_t RESERVED5[16U]; + __IOM uint8_t IPR[496U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED6[580U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[6U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + __IOM uint32_t NSACR; /*!< Offset: 0x08C (R/W) Non-Secure Access Control Register */ + uint32_t RESERVED3[92U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + __IOM uint32_t RFSR; /*!< Offset: 0x204 (R/W) RAS Fault Status Register */ + uint32_t RESERVED4[14U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + __OM uint32_t BPIALL; /*!< Offset: 0x278 ( /W) Branch Predictor Invalidate All */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_PENDNMISET_Pos 31U /*!< SCB ICSR: PENDNMISET Position */ +#define SCB_ICSR_PENDNMISET_Msk (1UL << SCB_ICSR_PENDNMISET_Pos) /*!< SCB ICSR: PENDNMISET Mask */ + +#define SCB_ICSR_NMIPENDSET_Pos SCB_ICSR_PENDNMISET_Pos /*!< SCB ICSR: NMIPENDSET Position, backward compatibility */ +#define SCB_ICSR_NMIPENDSET_Msk SCB_ICSR_PENDNMISET_Msk /*!< SCB ICSR: NMIPENDSET Mask, backward compatibility */ + +#define SCB_ICSR_PENDNMICLR_Pos 30U /*!< SCB ICSR: PENDNMICLR Position */ +#define SCB_ICSR_PENDNMICLR_Msk (1UL << SCB_ICSR_PENDNMICLR_Pos) /*!< SCB ICSR: PENDNMICLR Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_STTNS_Pos 24U /*!< SCB ICSR: STTNS Position (Security Extension) */ +#define SCB_ICSR_STTNS_Msk (1UL << SCB_ICSR_STTNS_Pos) /*!< SCB ICSR: STTNS Mask (Security Extension) */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIS_Pos 14U /*!< SCB AIRCR: PRIS Position */ +#define SCB_AIRCR_PRIS_Msk (1UL << SCB_AIRCR_PRIS_Pos) /*!< SCB AIRCR: PRIS Mask */ + +#define SCB_AIRCR_BFHFNMINS_Pos 13U /*!< SCB AIRCR: BFHFNMINS Position */ +#define SCB_AIRCR_BFHFNMINS_Msk (1UL << SCB_AIRCR_BFHFNMINS_Pos) /*!< SCB AIRCR: BFHFNMINS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_IESB_Pos 5U /*!< SCB AIRCR: Implicit ESB Enable Position */ +#define SCB_AIRCR_IESB_Msk (1UL << SCB_AIRCR_IESB_Pos) /*!< SCB AIRCR: Implicit ESB Enable Mask */ + +#define SCB_AIRCR_DIT_Pos 4U /*!< SCB AIRCR: Data Independent Timing Position */ +#define SCB_AIRCR_DIT_Msk (1UL << SCB_AIRCR_DIT_Pos) /*!< SCB AIRCR: Data Independent Timing Mask */ + +#define SCB_AIRCR_SYSRESETREQS_Pos 3U /*!< SCB AIRCR: SYSRESETREQS Position */ +#define SCB_AIRCR_SYSRESETREQS_Msk (1UL << SCB_AIRCR_SYSRESETREQS_Pos) /*!< SCB AIRCR: SYSRESETREQS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEPS_Pos 3U /*!< SCB SCR: SLEEPDEEPS Position */ +#define SCB_SCR_SLEEPDEEPS_Msk (1UL << SCB_SCR_SLEEPDEEPS_Pos) /*!< SCB SCR: SLEEPDEEPS Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_TRD_Pos 20U /*!< SCB CCR: TRD Position */ +#define SCB_CCR_TRD_Msk (1UL << SCB_CCR_TRD_Pos) /*!< SCB CCR: TRD Mask */ + +#define SCB_CCR_LOB_Pos 19U /*!< SCB CCR: LOB Position */ +#define SCB_CCR_LOB_Msk (1UL << SCB_CCR_LOB_Pos) /*!< SCB CCR: LOB Mask */ + +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: BP Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: BP Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: IC Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: IC Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: DC Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: DC Mask */ + +#define SCB_CCR_STKOFHFNMIGN_Pos 10U /*!< SCB CCR: STKOFHFNMIGN Position */ +#define SCB_CCR_STKOFHFNMIGN_Msk (1UL << SCB_CCR_STKOFHFNMIGN_Pos) /*!< SCB CCR: STKOFHFNMIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_HARDFAULTPENDED_Pos 21U /*!< SCB SHCSR: HARDFAULTPENDED Position */ +#define SCB_SHCSR_HARDFAULTPENDED_Msk (1UL << SCB_SHCSR_HARDFAULTPENDED_Pos) /*!< SCB SHCSR: HARDFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTPENDED_Pos 20U /*!< SCB SHCSR: SECUREFAULTPENDED Position */ +#define SCB_SHCSR_SECUREFAULTPENDED_Msk (1UL << SCB_SHCSR_SECUREFAULTPENDED_Pos) /*!< SCB SHCSR: SECUREFAULTPENDED Mask */ + +#define SCB_SHCSR_SECUREFAULTENA_Pos 19U /*!< SCB SHCSR: SECUREFAULTENA Position */ +#define SCB_SHCSR_SECUREFAULTENA_Msk (1UL << SCB_SHCSR_SECUREFAULTENA_Pos) /*!< SCB SHCSR: SECUREFAULTENA Mask */ + +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_NMIACT_Pos 5U /*!< SCB SHCSR: NMIACT Position */ +#define SCB_SHCSR_NMIACT_Msk (1UL << SCB_SHCSR_NMIACT_Pos) /*!< SCB SHCSR: NMIACT Mask */ + +#define SCB_SHCSR_SECUREFAULTACT_Pos 4U /*!< SCB SHCSR: SECUREFAULTACT Position */ +#define SCB_SHCSR_SECUREFAULTACT_Msk (1UL << SCB_SHCSR_SECUREFAULTACT_Pos) /*!< SCB SHCSR: SECUREFAULTACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_HARDFAULTACT_Pos 2U /*!< SCB SHCSR: HARDFAULTACT Position */ +#define SCB_SHCSR_HARDFAULTACT_Msk (1UL << SCB_SHCSR_HARDFAULTACT_Pos) /*!< SCB SHCSR: HARDFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_STKOF_Pos (SCB_CFSR_USGFAULTSR_Pos + 4U) /*!< SCB CFSR (UFSR): STKOF Position */ +#define SCB_CFSR_STKOF_Msk (1UL << SCB_CFSR_STKOF_Pos) /*!< SCB CFSR (UFSR): STKOF Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_PMU_Pos 5U /*!< SCB DFSR: PMU Position */ +#define SCB_DFSR_PMU_Msk (1UL << SCB_DFSR_PMU_Pos) /*!< SCB DFSR: PMU Mask */ + +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Non-Secure Access Control Register Definitions */ +#define SCB_NSACR_CP11_Pos 11U /*!< SCB NSACR: CP11 Position */ +#define SCB_NSACR_CP11_Msk (1UL << SCB_NSACR_CP11_Pos) /*!< SCB NSACR: CP11 Mask */ + +#define SCB_NSACR_CP10_Pos 10U /*!< SCB NSACR: CP10 Position */ +#define SCB_NSACR_CP10_Msk (1UL << SCB_NSACR_CP10_Pos) /*!< SCB NSACR: CP10 Mask */ + +#define SCB_NSACR_CP7_Pos 7U /*!< SCB NSACR: CP7 Position */ +#define SCB_NSACR_CP7_Msk (1UL << SCB_NSACR_CP7_Pos) /*!< SCB NSACR: CP7 Mask */ + +#define SCB_NSACR_CP6_Pos 6U /*!< SCB NSACR: CP6 Position */ +#define SCB_NSACR_CP6_Msk (1UL << SCB_NSACR_CP6_Pos) /*!< SCB NSACR: CP6 Mask */ + +#define SCB_NSACR_CP5_Pos 5U /*!< SCB NSACR: CP5 Position */ +#define SCB_NSACR_CP5_Msk (1UL << SCB_NSACR_CP5_Pos) /*!< SCB NSACR: CP5 Mask */ + +#define SCB_NSACR_CP4_Pos 4U /*!< SCB NSACR: CP4 Position */ +#define SCB_NSACR_CP4_Msk (1UL << SCB_NSACR_CP4_Pos) /*!< SCB NSACR: CP4 Mask */ + +#define SCB_NSACR_CP3_Pos 3U /*!< SCB NSACR: CP3 Position */ +#define SCB_NSACR_CP3_Msk (1UL << SCB_NSACR_CP3_Pos) /*!< SCB NSACR: CP3 Mask */ + +#define SCB_NSACR_CP2_Pos 2U /*!< SCB NSACR: CP2 Position */ +#define SCB_NSACR_CP2_Msk (1UL << SCB_NSACR_CP2_Pos) /*!< SCB NSACR: CP2 Mask */ + +#define SCB_NSACR_CP1_Pos 1U /*!< SCB NSACR: CP1 Position */ +#define SCB_NSACR_CP1_Msk (1UL << SCB_NSACR_CP1_Pos) /*!< SCB NSACR: CP1 Mask */ + +#define SCB_NSACR_CP0_Pos 0U /*!< SCB NSACR: CP0 Position */ +#define SCB_NSACR_CP0_Msk (1UL /*<< SCB_NSACR_CP0_Pos*/) /*!< SCB NSACR: CP0 Mask */ + +/* SCB Debug Feature Register 0 Definitions */ +#define SCB_ID_DFR_UDE_Pos 28U /*!< SCB ID_DFR: UDE Position */ +#define SCB_ID_DFR_UDE_Msk (0xFUL << SCB_ID_DFR_UDE_Pos) /*!< SCB ID_DFR: UDE Mask */ + +#define SCB_ID_DFR_MProfDbg_Pos 20U /*!< SCB ID_DFR: MProfDbg Position */ +#define SCB_ID_DFR_MProfDbg_Msk (0xFUL << SCB_ID_DFR_MProfDbg_Pos) /*!< SCB ID_DFR: MProfDbg Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB RAS Fault Status Register Definitions */ +#define SCB_RFSR_V_Pos 31U /*!< SCB RFSR: V Position */ +#define SCB_RFSR_V_Msk (1UL << SCB_RFSR_V_Pos) /*!< SCB RFSR: V Mask */ + +#define SCB_RFSR_IS_Pos 16U /*!< SCB RFSR: IS Position */ +#define SCB_RFSR_IS_Msk (0x7FFFUL << SCB_RFSR_IS_Pos) /*!< SCB RFSR: IS Mask */ + +#define SCB_RFSR_UET_Pos 0U /*!< SCB RFSR: UET Position */ +#define SCB_RFSR_UET_Msk (3UL /*<< SCB_RFSR_UET_Pos*/) /*!< SCB RFSR: UET Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ + __IOM uint32_t CPPWR; /*!< Offset: 0x00C (R/W) Coprocessor Power Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) ITM Device Architecture Register */ + uint32_t RESERVED6[3U]; + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) ITM Device Type Register */ + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Stimulus Port Register Definitions */ +#define ITM_STIM_DISABLED_Pos 1U /*!< ITM STIM: DISABLED Position */ +#define ITM_STIM_DISABLED_Msk (0x1UL << ITM_STIM_DISABLED_Pos) /*!< ITM STIM: DISABLED Mask */ + +#define ITM_STIM_FIFOREADY_Pos 0U /*!< ITM STIM: FIFOREADY Position */ +#define ITM_STIM_FIFOREADY_Msk (0x1UL /*<< ITM_STIM_FIFOREADY_Pos*/) /*!< ITM STIM: FIFOREADY Mask */ + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TRACEBUSID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TRACEBUSID_Msk (0x7FUL << ITM_TCR_TRACEBUSID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPRESCALE_Pos 8U /*!< ITM TCR: TSPRESCALE Position */ +#define ITM_TCR_TSPRESCALE_Msk (3UL << ITM_TCR_TSPRESCALE_Pos) /*!< ITM TCR: TSPRESCALE Mask */ + +#define ITM_TCR_STALLENA_Pos 5U /*!< ITM TCR: STALLENA Position */ +#define ITM_TCR_STALLENA_Msk (1UL << ITM_TCR_STALLENA_Pos) /*!< ITM TCR: STALLENA Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + uint32_t RESERVED3[1U]; + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED4[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + uint32_t RESERVED5[1U]; + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED6[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + uint32_t RESERVED7[1U]; + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED8[1U]; + __IOM uint32_t COMP4; /*!< Offset: 0x060 (R/W) Comparator Register 4 */ + uint32_t RESERVED9[1U]; + __IOM uint32_t FUNCTION4; /*!< Offset: 0x068 (R/W) Function Register 4 */ + uint32_t RESERVED10[1U]; + __IOM uint32_t COMP5; /*!< Offset: 0x070 (R/W) Comparator Register 5 */ + uint32_t RESERVED11[1U]; + __IOM uint32_t FUNCTION5; /*!< Offset: 0x078 (R/W) Function Register 5 */ + uint32_t RESERVED12[1U]; + __IOM uint32_t COMP6; /*!< Offset: 0x080 (R/W) Comparator Register 6 */ + uint32_t RESERVED13[1U]; + __IOM uint32_t FUNCTION6; /*!< Offset: 0x088 (R/W) Function Register 6 */ + uint32_t RESERVED14[1U]; + __IOM uint32_t COMP7; /*!< Offset: 0x090 (R/W) Comparator Register 7 */ + uint32_t RESERVED15[1U]; + __IOM uint32_t FUNCTION7; /*!< Offset: 0x098 (R/W) Function Register 7 */ + uint32_t RESERVED16[1U]; + __IOM uint32_t COMP8; /*!< Offset: 0x0A0 (R/W) Comparator Register 8 */ + uint32_t RESERVED17[1U]; + __IOM uint32_t FUNCTION8; /*!< Offset: 0x0A8 (R/W) Function Register 8 */ + uint32_t RESERVED18[1U]; + __IOM uint32_t COMP9; /*!< Offset: 0x0B0 (R/W) Comparator Register 9 */ + uint32_t RESERVED19[1U]; + __IOM uint32_t FUNCTION9; /*!< Offset: 0x0B8 (R/W) Function Register 9 */ + uint32_t RESERVED20[1U]; + __IOM uint32_t COMP10; /*!< Offset: 0x0C0 (R/W) Comparator Register 10 */ + uint32_t RESERVED21[1U]; + __IOM uint32_t FUNCTION10; /*!< Offset: 0x0C8 (R/W) Function Register 10 */ + uint32_t RESERVED22[1U]; + __IOM uint32_t COMP11; /*!< Offset: 0x0D0 (R/W) Comparator Register 11 */ + uint32_t RESERVED23[1U]; + __IOM uint32_t FUNCTION11; /*!< Offset: 0x0D8 (R/W) Function Register 11 */ + uint32_t RESERVED24[1U]; + __IOM uint32_t COMP12; /*!< Offset: 0x0E0 (R/W) Comparator Register 12 */ + uint32_t RESERVED25[1U]; + __IOM uint32_t FUNCTION12; /*!< Offset: 0x0E8 (R/W) Function Register 12 */ + uint32_t RESERVED26[1U]; + __IOM uint32_t COMP13; /*!< Offset: 0x0F0 (R/W) Comparator Register 13 */ + uint32_t RESERVED27[1U]; + __IOM uint32_t FUNCTION13; /*!< Offset: 0x0F8 (R/W) Function Register 13 */ + uint32_t RESERVED28[1U]; + __IOM uint32_t COMP14; /*!< Offset: 0x100 (R/W) Comparator Register 14 */ + uint32_t RESERVED29[1U]; + __IOM uint32_t FUNCTION14; /*!< Offset: 0x108 (R/W) Function Register 14 */ + uint32_t RESERVED30[1U]; + __IOM uint32_t COMP15; /*!< Offset: 0x110 (R/W) Comparator Register 15 */ + uint32_t RESERVED31[1U]; + __IOM uint32_t FUNCTION15; /*!< Offset: 0x118 (R/W) Function Register 15 */ + uint32_t RESERVED32[934U]; + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ + uint32_t RESERVED33[1U]; + __IM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/ ) Device Architecture Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCDISS_Pos 23U /*!< DWT CTRL: CYCDISS Position */ +#define DWT_CTRL_CYCDISS_Msk (0x1UL << DWT_CTRL_CYCDISS_Pos) /*!< DWT CTRL: CYCDISS Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_ID_Pos 27U /*!< DWT FUNCTION: ID Position */ +#define DWT_FUNCTION_ID_Msk (0x1FUL << DWT_FUNCTION_ID_Pos) /*!< DWT FUNCTION: ID Mask */ + +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_ACTION_Pos 4U /*!< DWT FUNCTION: ACTION Position */ +#define DWT_FUNCTION_ACTION_Msk (0x1UL << DWT_FUNCTION_ACTION_Pos) /*!< DWT FUNCTION: ACTION Mask */ + +#define DWT_FUNCTION_MATCH_Pos 0U /*!< DWT FUNCTION: MATCH Position */ +#define DWT_FUNCTION_MATCH_Msk (0xFUL /*<< DWT_FUNCTION_MATCH_Pos*/) /*!< DWT FUNCTION: MATCH Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Sizes Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Sizes Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IOM uint32_t PSCR; /*!< Offset: 0x308 (R/W) Periodic Synchronization Control Register */ + uint32_t RESERVED3[809U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) Software Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) Software Lock Status Register */ + uint32_t RESERVED4[4U]; + __IM uint32_t TYPE; /*!< Offset: 0xFC8 (R/ ) Device Identifier Register */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) Device Type Register */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_SWOSCALER_Pos 0U /*!< TPI ACPR: SWOSCALER Position */ +#define TPI_ACPR_SWOSCALER_Msk (0xFFFFUL /*<< TPI_ACPR_SWOSCALER_Pos*/) /*!< TPI ACPR: SWOSCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_FOnMan_Pos 6U /*!< TPI FFCR: FOnMan Position */ +#define TPI_FFCR_FOnMan_Msk (0x1UL << TPI_FFCR_FOnMan_Pos) /*!< TPI FFCR: FOnMan Mask */ + +#define TPI_FFCR_EnFmt_Pos 0U /*!< TPI FFCR: EnFmt Position */ +#define TPI_FFCR_EnFmt_Msk (0x3UL << /*TPI_FFCR_EnFmt_Pos*/) /*!< TPI FFCR: EnFmt Mask */ + +/* TPI Periodic Synchronization Control Register Definitions */ +#define TPI_PSCR_PSCount_Pos 0U /*!< TPI PSCR: PSCount Position */ +#define TPI_PSCR_PSCount_Msk (0x1FUL /*<< TPI_PSCR_PSCount_Pos*/) /*!< TPI PSCR: TPSCount Mask */ + +/* TPI Software Lock Status Register Definitions */ +#define TPI_LSR_nTT_Pos 1U /*!< TPI LSR: Not thirty-two bit. Position */ +#define TPI_LSR_nTT_Msk (0x1UL << TPI_LSR_nTT_Pos) /*!< TPI LSR: Not thirty-two bit. Mask */ + +#define TPI_LSR_SLK_Pos 1U /*!< TPI LSR: Software Lock status Position */ +#define TPI_LSR_SLK_Msk (0x1UL << TPI_LSR_SLK_Pos) /*!< TPI LSR: Software Lock status Mask */ + +#define TPI_LSR_SLI_Pos 0U /*!< TPI LSR: Software Lock implemented Position */ +#define TPI_LSR_SLI_Msk (0x1UL /*<< TPI_LSR_SLI_Pos*/) /*!< TPI LSR: Software Lock implemented Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_FIFOSZ_Pos 6U /*!< TPI DEVID: FIFO depth Position */ +#define TPI_DEVID_FIFOSZ_Msk (0x7UL << TPI_DEVID_FIFOSZ_Pos) /*!< TPI DEVID: FIFO depth Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_PMU Performance Monitoring Unit (PMU) + \brief Type definitions for the Performance Monitoring Unit (PMU) + @{ + */ + +/** + \brief Structure type to access the Performance Monitoring Unit (PMU). + */ +typedef struct +{ + __IOM uint32_t EVCNTR[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x0 (R/W) PMU Event Counter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED0[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCNTR; /*!< Offset: 0x7C (R/W) PMU Cycle Counter Register */ + uint32_t RESERVED1[224]; + __IOM uint32_t EVTYPER[__PMU_NUM_EVENTCNT]; /*!< Offset: 0x400 (R/W) PMU Event Type and Filter Registers */ +#if __PMU_NUM_EVENTCNT<31 + uint32_t RESERVED2[31U-__PMU_NUM_EVENTCNT]; +#endif + __IOM uint32_t CCFILTR; /*!< Offset: 0x47C (R/W) PMU Cycle Counter Filter Register */ + uint32_t RESERVED3[480]; + __IOM uint32_t CNTENSET; /*!< Offset: 0xC00 (R/W) PMU Count Enable Set Register */ + uint32_t RESERVED4[7]; + __IOM uint32_t CNTENCLR; /*!< Offset: 0xC20 (R/W) PMU Count Enable Clear Register */ + uint32_t RESERVED5[7]; + __IOM uint32_t INTENSET; /*!< Offset: 0xC40 (R/W) PMU Interrupt Enable Set Register */ + uint32_t RESERVED6[7]; + __IOM uint32_t INTENCLR; /*!< Offset: 0xC60 (R/W) PMU Interrupt Enable Clear Register */ + uint32_t RESERVED7[7]; + __IOM uint32_t OVSCLR; /*!< Offset: 0xC80 (R/W) PMU Overflow Flag Status Clear Register */ + uint32_t RESERVED8[7]; + __IOM uint32_t SWINC; /*!< Offset: 0xCA0 (R/W) PMU Software Increment Register */ + uint32_t RESERVED9[7]; + __IOM uint32_t OVSSET; /*!< Offset: 0xCC0 (R/W) PMU Overflow Flag Status Set Register */ + uint32_t RESERVED10[79]; + __IOM uint32_t TYPE; /*!< Offset: 0xE00 (R/W) PMU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0xE04 (R/W) PMU Control Register */ + uint32_t RESERVED11[108]; + __IOM uint32_t AUTHSTATUS; /*!< Offset: 0xFB8 (R/W) PMU Authentication Status Register */ + __IOM uint32_t DEVARCH; /*!< Offset: 0xFBC (R/W) PMU Device Architecture Register */ + uint32_t RESERVED12[4]; + __IOM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/W) PMU Device Type Register */ + __IOM uint32_t PIDR4; /*!< Offset: 0xFD0 (R/W) PMU Peripheral Identification Register 4 */ + uint32_t RESERVED13[3]; + __IOM uint32_t PIDR0; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 0 */ + __IOM uint32_t PIDR1; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 1 */ + __IOM uint32_t PIDR2; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 2 */ + __IOM uint32_t PIDR3; /*!< Offset: 0xFE0 (R/W) PMU Peripheral Identification Register 3 */ + uint32_t RESERVED14[3]; + __IOM uint32_t CIDR0; /*!< Offset: 0xFF0 (R/W) PMU Component Identification Register 0 */ + __IOM uint32_t CIDR1; /*!< Offset: 0xFF4 (R/W) PMU Component Identification Register 1 */ + __IOM uint32_t CIDR2; /*!< Offset: 0xFF8 (R/W) PMU Component Identification Register 2 */ + __IOM uint32_t CIDR3; /*!< Offset: 0xFFC (R/W) PMU Component Identification Register 3 */ +} PMU_Type; + +/** \brief PMU Event Counter Registers (0-30) Definitions */ + +#define PMU_EVCNTR_CNT_Pos 0U /*!< PMU EVCNTR: Counter Position */ +#define PMU_EVCNTR_CNT_Msk (16UL /*<< PMU_EVCNTRx_CNT_Pos*/) /*!< PMU EVCNTR: Counter Mask */ + +/** \brief PMU Event Type and Filter Registers (0-30) Definitions */ + +#define PMU_EVTYPER_EVENTTOCNT_Pos 0U /*!< PMU EVTYPER: Event to Count Position */ +#define PMU_EVTYPER_EVENTTOCNT_Msk (16UL /*<< EVTYPERx_EVENTTOCNT_Pos*/) /*!< PMU EVTYPER: Event to Count Mask */ + +/** \brief PMU Count Enable Set Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENSET: Event Counter 0 Enable Set Position */ +#define PMU_CNTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENSET_CNT0_ENABLE_Pos*/) /*!< PMU CNTENSET: Event Counter 0 Enable Set Mask */ + +#define PMU_CNTENSET_CNT1_ENABLE_Pos 1U /*!< PMU CNTENSET: Event Counter 1 Enable Set Position */ +#define PMU_CNTENSET_CNT1_ENABLE_Msk (1UL << PMU_CNTENSET_CNT1_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 1 Enable Set Mask */ + +#define PMU_CNTENSET_CNT2_ENABLE_Pos 2U /*!< PMU CNTENSET: Event Counter 2 Enable Set Position */ +#define PMU_CNTENSET_CNT2_ENABLE_Msk (1UL << PMU_CNTENSET_CNT2_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 2 Enable Set Mask */ + +#define PMU_CNTENSET_CNT3_ENABLE_Pos 3U /*!< PMU CNTENSET: Event Counter 3 Enable Set Position */ +#define PMU_CNTENSET_CNT3_ENABLE_Msk (1UL << PMU_CNTENSET_CNT3_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 3 Enable Set Mask */ + +#define PMU_CNTENSET_CNT4_ENABLE_Pos 4U /*!< PMU CNTENSET: Event Counter 4 Enable Set Position */ +#define PMU_CNTENSET_CNT4_ENABLE_Msk (1UL << PMU_CNTENSET_CNT4_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 4 Enable Set Mask */ + +#define PMU_CNTENSET_CNT5_ENABLE_Pos 5U /*!< PMU CNTENSET: Event Counter 5 Enable Set Position */ +#define PMU_CNTENSET_CNT5_ENABLE_Msk (1UL << PMU_CNTENSET_CNT5_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 5 Enable Set Mask */ + +#define PMU_CNTENSET_CNT6_ENABLE_Pos 6U /*!< PMU CNTENSET: Event Counter 6 Enable Set Position */ +#define PMU_CNTENSET_CNT6_ENABLE_Msk (1UL << PMU_CNTENSET_CNT6_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 6 Enable Set Mask */ + +#define PMU_CNTENSET_CNT7_ENABLE_Pos 7U /*!< PMU CNTENSET: Event Counter 7 Enable Set Position */ +#define PMU_CNTENSET_CNT7_ENABLE_Msk (1UL << PMU_CNTENSET_CNT7_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 7 Enable Set Mask */ + +#define PMU_CNTENSET_CNT8_ENABLE_Pos 8U /*!< PMU CNTENSET: Event Counter 8 Enable Set Position */ +#define PMU_CNTENSET_CNT8_ENABLE_Msk (1UL << PMU_CNTENSET_CNT8_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 8 Enable Set Mask */ + +#define PMU_CNTENSET_CNT9_ENABLE_Pos 9U /*!< PMU CNTENSET: Event Counter 9 Enable Set Position */ +#define PMU_CNTENSET_CNT9_ENABLE_Msk (1UL << PMU_CNTENSET_CNT9_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 9 Enable Set Mask */ + +#define PMU_CNTENSET_CNT10_ENABLE_Pos 10U /*!< PMU CNTENSET: Event Counter 10 Enable Set Position */ +#define PMU_CNTENSET_CNT10_ENABLE_Msk (1UL << PMU_CNTENSET_CNT10_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 10 Enable Set Mask */ + +#define PMU_CNTENSET_CNT11_ENABLE_Pos 11U /*!< PMU CNTENSET: Event Counter 11 Enable Set Position */ +#define PMU_CNTENSET_CNT11_ENABLE_Msk (1UL << PMU_CNTENSET_CNT11_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 11 Enable Set Mask */ + +#define PMU_CNTENSET_CNT12_ENABLE_Pos 12U /*!< PMU CNTENSET: Event Counter 12 Enable Set Position */ +#define PMU_CNTENSET_CNT12_ENABLE_Msk (1UL << PMU_CNTENSET_CNT12_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 12 Enable Set Mask */ + +#define PMU_CNTENSET_CNT13_ENABLE_Pos 13U /*!< PMU CNTENSET: Event Counter 13 Enable Set Position */ +#define PMU_CNTENSET_CNT13_ENABLE_Msk (1UL << PMU_CNTENSET_CNT13_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 13 Enable Set Mask */ + +#define PMU_CNTENSET_CNT14_ENABLE_Pos 14U /*!< PMU CNTENSET: Event Counter 14 Enable Set Position */ +#define PMU_CNTENSET_CNT14_ENABLE_Msk (1UL << PMU_CNTENSET_CNT14_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 14 Enable Set Mask */ + +#define PMU_CNTENSET_CNT15_ENABLE_Pos 15U /*!< PMU CNTENSET: Event Counter 15 Enable Set Position */ +#define PMU_CNTENSET_CNT15_ENABLE_Msk (1UL << PMU_CNTENSET_CNT15_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 15 Enable Set Mask */ + +#define PMU_CNTENSET_CNT16_ENABLE_Pos 16U /*!< PMU CNTENSET: Event Counter 16 Enable Set Position */ +#define PMU_CNTENSET_CNT16_ENABLE_Msk (1UL << PMU_CNTENSET_CNT16_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 16 Enable Set Mask */ + +#define PMU_CNTENSET_CNT17_ENABLE_Pos 17U /*!< PMU CNTENSET: Event Counter 17 Enable Set Position */ +#define PMU_CNTENSET_CNT17_ENABLE_Msk (1UL << PMU_CNTENSET_CNT17_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 17 Enable Set Mask */ + +#define PMU_CNTENSET_CNT18_ENABLE_Pos 18U /*!< PMU CNTENSET: Event Counter 18 Enable Set Position */ +#define PMU_CNTENSET_CNT18_ENABLE_Msk (1UL << PMU_CNTENSET_CNT18_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 18 Enable Set Mask */ + +#define PMU_CNTENSET_CNT19_ENABLE_Pos 19U /*!< PMU CNTENSET: Event Counter 19 Enable Set Position */ +#define PMU_CNTENSET_CNT19_ENABLE_Msk (1UL << PMU_CNTENSET_CNT19_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 19 Enable Set Mask */ + +#define PMU_CNTENSET_CNT20_ENABLE_Pos 20U /*!< PMU CNTENSET: Event Counter 20 Enable Set Position */ +#define PMU_CNTENSET_CNT20_ENABLE_Msk (1UL << PMU_CNTENSET_CNT20_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 20 Enable Set Mask */ + +#define PMU_CNTENSET_CNT21_ENABLE_Pos 21U /*!< PMU CNTENSET: Event Counter 21 Enable Set Position */ +#define PMU_CNTENSET_CNT21_ENABLE_Msk (1UL << PMU_CNTENSET_CNT21_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 21 Enable Set Mask */ + +#define PMU_CNTENSET_CNT22_ENABLE_Pos 22U /*!< PMU CNTENSET: Event Counter 22 Enable Set Position */ +#define PMU_CNTENSET_CNT22_ENABLE_Msk (1UL << PMU_CNTENSET_CNT22_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 22 Enable Set Mask */ + +#define PMU_CNTENSET_CNT23_ENABLE_Pos 23U /*!< PMU CNTENSET: Event Counter 23 Enable Set Position */ +#define PMU_CNTENSET_CNT23_ENABLE_Msk (1UL << PMU_CNTENSET_CNT23_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 23 Enable Set Mask */ + +#define PMU_CNTENSET_CNT24_ENABLE_Pos 24U /*!< PMU CNTENSET: Event Counter 24 Enable Set Position */ +#define PMU_CNTENSET_CNT24_ENABLE_Msk (1UL << PMU_CNTENSET_CNT24_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 24 Enable Set Mask */ + +#define PMU_CNTENSET_CNT25_ENABLE_Pos 25U /*!< PMU CNTENSET: Event Counter 25 Enable Set Position */ +#define PMU_CNTENSET_CNT25_ENABLE_Msk (1UL << PMU_CNTENSET_CNT25_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 25 Enable Set Mask */ + +#define PMU_CNTENSET_CNT26_ENABLE_Pos 26U /*!< PMU CNTENSET: Event Counter 26 Enable Set Position */ +#define PMU_CNTENSET_CNT26_ENABLE_Msk (1UL << PMU_CNTENSET_CNT26_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 26 Enable Set Mask */ + +#define PMU_CNTENSET_CNT27_ENABLE_Pos 27U /*!< PMU CNTENSET: Event Counter 27 Enable Set Position */ +#define PMU_CNTENSET_CNT27_ENABLE_Msk (1UL << PMU_CNTENSET_CNT27_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 27 Enable Set Mask */ + +#define PMU_CNTENSET_CNT28_ENABLE_Pos 28U /*!< PMU CNTENSET: Event Counter 28 Enable Set Position */ +#define PMU_CNTENSET_CNT28_ENABLE_Msk (1UL << PMU_CNTENSET_CNT28_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 28 Enable Set Mask */ + +#define PMU_CNTENSET_CNT29_ENABLE_Pos 29U /*!< PMU CNTENSET: Event Counter 29 Enable Set Position */ +#define PMU_CNTENSET_CNT29_ENABLE_Msk (1UL << PMU_CNTENSET_CNT29_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 29 Enable Set Mask */ + +#define PMU_CNTENSET_CNT30_ENABLE_Pos 30U /*!< PMU CNTENSET: Event Counter 30 Enable Set Position */ +#define PMU_CNTENSET_CNT30_ENABLE_Msk (1UL << PMU_CNTENSET_CNT30_ENABLE_Pos) /*!< PMU CNTENSET: Event Counter 30 Enable Set Mask */ + +#define PMU_CNTENSET_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENSET: Cycle Counter Enable Set Position */ +#define PMU_CNTENSET_CCNTR_ENABLE_Msk (1UL << PMU_CNTENSET_CCNTR_ENABLE_Pos) /*!< PMU CNTENSET: Cycle Counter Enable Set Mask */ + +/** \brief PMU Count Enable Clear Register Definitions */ + +#define PMU_CNTENSET_CNT0_ENABLE_Pos 0U /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Position */ +#define PMU_CNTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_CNTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU CNTENCLR: Event Counter 0 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU CNTENCLR: Event Counter 1 Enable Clear Position */ +#define PMU_CNTENCLR_CNT1_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT1_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 1 Enable Clear */ + +#define PMU_CNTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Position */ +#define PMU_CNTENCLR_CNT2_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT2_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 2 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Position */ +#define PMU_CNTENCLR_CNT3_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT3_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 3 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Position */ +#define PMU_CNTENCLR_CNT4_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT4_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 4 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Position */ +#define PMU_CNTENCLR_CNT5_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT5_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 5 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Position */ +#define PMU_CNTENCLR_CNT6_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT6_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 6 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Position */ +#define PMU_CNTENCLR_CNT7_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT7_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 7 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Position */ +#define PMU_CNTENCLR_CNT8_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT8_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 8 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Position */ +#define PMU_CNTENCLR_CNT9_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT9_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 9 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Position */ +#define PMU_CNTENCLR_CNT10_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT10_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 10 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Position */ +#define PMU_CNTENCLR_CNT11_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT11_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 11 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Position */ +#define PMU_CNTENCLR_CNT12_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT12_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 12 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Position */ +#define PMU_CNTENCLR_CNT13_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT13_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 13 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Position */ +#define PMU_CNTENCLR_CNT14_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT14_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 14 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Position */ +#define PMU_CNTENCLR_CNT15_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT15_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 15 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Position */ +#define PMU_CNTENCLR_CNT16_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT16_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 16 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Position */ +#define PMU_CNTENCLR_CNT17_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT17_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 17 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Position */ +#define PMU_CNTENCLR_CNT18_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT18_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 18 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Position */ +#define PMU_CNTENCLR_CNT19_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT19_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 19 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Position */ +#define PMU_CNTENCLR_CNT20_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT20_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 20 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Position */ +#define PMU_CNTENCLR_CNT21_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT21_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 21 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Position */ +#define PMU_CNTENCLR_CNT22_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT22_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 22 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Position */ +#define PMU_CNTENCLR_CNT23_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT23_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 23 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Position */ +#define PMU_CNTENCLR_CNT24_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT24_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 24 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Position */ +#define PMU_CNTENCLR_CNT25_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT25_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 25 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Position */ +#define PMU_CNTENCLR_CNT26_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT26_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 26 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Position */ +#define PMU_CNTENCLR_CNT27_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT27_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 27 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Position */ +#define PMU_CNTENCLR_CNT28_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT28_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 28 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Position */ +#define PMU_CNTENCLR_CNT29_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT29_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 29 Enable Clear Mask */ + +#define PMU_CNTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Position */ +#define PMU_CNTENCLR_CNT30_ENABLE_Msk (1UL << PMU_CNTENCLR_CNT30_ENABLE_Pos) /*!< PMU CNTENCLR: Event Counter 30 Enable Clear Mask */ + +#define PMU_CNTENCLR_CCNTR_ENABLE_Pos 31U /*!< PMU CNTENCLR: Cycle Counter Enable Clear Position */ +#define PMU_CNTENCLR_CCNTR_ENABLE_Msk (1UL << PMU_CNTENCLR_CCNTR_ENABLE_Pos) /*!< PMU CNTENCLR: Cycle Counter Enable Clear Mask */ + +/** \brief PMU Interrupt Enable Set Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENSET_CNT0_ENABLE_Pos*/) /*!< PMU INTENSET: Event Counter 0 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT1_ENABLE_Pos 1U /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT1_ENABLE_Msk (1UL << PMU_INTENSET_CNT1_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 1 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT2_ENABLE_Pos 2U /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT2_ENABLE_Msk (1UL << PMU_INTENSET_CNT2_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 2 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT3_ENABLE_Pos 3U /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT3_ENABLE_Msk (1UL << PMU_INTENSET_CNT3_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 3 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT4_ENABLE_Pos 4U /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT4_ENABLE_Msk (1UL << PMU_INTENSET_CNT4_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 4 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT5_ENABLE_Pos 5U /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT5_ENABLE_Msk (1UL << PMU_INTENSET_CNT5_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 5 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT6_ENABLE_Pos 6U /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT6_ENABLE_Msk (1UL << PMU_INTENSET_CNT6_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 6 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT7_ENABLE_Pos 7U /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT7_ENABLE_Msk (1UL << PMU_INTENSET_CNT7_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 7 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT8_ENABLE_Pos 8U /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT8_ENABLE_Msk (1UL << PMU_INTENSET_CNT8_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 8 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT9_ENABLE_Pos 9U /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT9_ENABLE_Msk (1UL << PMU_INTENSET_CNT9_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 9 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT10_ENABLE_Pos 10U /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT10_ENABLE_Msk (1UL << PMU_INTENSET_CNT10_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 10 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT11_ENABLE_Pos 11U /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT11_ENABLE_Msk (1UL << PMU_INTENSET_CNT11_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 11 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT12_ENABLE_Pos 12U /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT12_ENABLE_Msk (1UL << PMU_INTENSET_CNT12_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 12 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT13_ENABLE_Pos 13U /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT13_ENABLE_Msk (1UL << PMU_INTENSET_CNT13_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 13 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT14_ENABLE_Pos 14U /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT14_ENABLE_Msk (1UL << PMU_INTENSET_CNT14_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 14 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT15_ENABLE_Pos 15U /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT15_ENABLE_Msk (1UL << PMU_INTENSET_CNT15_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 15 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT16_ENABLE_Pos 16U /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT16_ENABLE_Msk (1UL << PMU_INTENSET_CNT16_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 16 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT17_ENABLE_Pos 17U /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT17_ENABLE_Msk (1UL << PMU_INTENSET_CNT17_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 17 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT18_ENABLE_Pos 18U /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT18_ENABLE_Msk (1UL << PMU_INTENSET_CNT18_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 18 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT19_ENABLE_Pos 19U /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT19_ENABLE_Msk (1UL << PMU_INTENSET_CNT19_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 19 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT20_ENABLE_Pos 20U /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT20_ENABLE_Msk (1UL << PMU_INTENSET_CNT20_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 20 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT21_ENABLE_Pos 21U /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT21_ENABLE_Msk (1UL << PMU_INTENSET_CNT21_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 21 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT22_ENABLE_Pos 22U /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT22_ENABLE_Msk (1UL << PMU_INTENSET_CNT22_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 22 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT23_ENABLE_Pos 23U /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT23_ENABLE_Msk (1UL << PMU_INTENSET_CNT23_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 23 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT24_ENABLE_Pos 24U /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT24_ENABLE_Msk (1UL << PMU_INTENSET_CNT24_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 24 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT25_ENABLE_Pos 25U /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT25_ENABLE_Msk (1UL << PMU_INTENSET_CNT25_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 25 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT26_ENABLE_Pos 26U /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT26_ENABLE_Msk (1UL << PMU_INTENSET_CNT26_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 26 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT27_ENABLE_Pos 27U /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT27_ENABLE_Msk (1UL << PMU_INTENSET_CNT27_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 27 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT28_ENABLE_Pos 28U /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT28_ENABLE_Msk (1UL << PMU_INTENSET_CNT28_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 28 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT29_ENABLE_Pos 29U /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT29_ENABLE_Msk (1UL << PMU_INTENSET_CNT29_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 29 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CNT30_ENABLE_Pos 30U /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Position */ +#define PMU_INTENSET_CNT30_ENABLE_Msk (1UL << PMU_INTENSET_CNT30_ENABLE_Pos) /*!< PMU INTENSET: Event Counter 30 Interrupt Enable Set Mask */ + +#define PMU_INTENSET_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Position */ +#define PMU_INTENSET_CCYCNT_ENABLE_Msk (1UL << PMU_INTENSET_CYCCNT_ENABLE_Pos) /*!< PMU INTENSET: Cycle Counter Interrupt Enable Set Mask */ + +/** \brief PMU Interrupt Enable Clear Register Definitions */ + +#define PMU_INTENSET_CNT0_ENABLE_Pos 0U /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT0_ENABLE_Msk (1UL /*<< PMU_INTENCLR_CNT0_ENABLE_Pos*/) /*!< PMU INTENCLR: Event Counter 0 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT1_ENABLE_Pos 1U /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT1_ENABLE_Msk (1UL << PMU_INTENCLR_CNT1_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 1 Interrupt Enable Clear */ + +#define PMU_INTENCLR_CNT2_ENABLE_Pos 2U /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT2_ENABLE_Msk (1UL << PMU_INTENCLR_CNT2_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 2 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT3_ENABLE_Pos 3U /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT3_ENABLE_Msk (1UL << PMU_INTENCLR_CNT3_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 3 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT4_ENABLE_Pos 4U /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT4_ENABLE_Msk (1UL << PMU_INTENCLR_CNT4_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 4 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT5_ENABLE_Pos 5U /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT5_ENABLE_Msk (1UL << PMU_INTENCLR_CNT5_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 5 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT6_ENABLE_Pos 6U /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT6_ENABLE_Msk (1UL << PMU_INTENCLR_CNT6_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 6 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT7_ENABLE_Pos 7U /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT7_ENABLE_Msk (1UL << PMU_INTENCLR_CNT7_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 7 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT8_ENABLE_Pos 8U /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT8_ENABLE_Msk (1UL << PMU_INTENCLR_CNT8_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 8 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT9_ENABLE_Pos 9U /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT9_ENABLE_Msk (1UL << PMU_INTENCLR_CNT9_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 9 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT10_ENABLE_Pos 10U /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT10_ENABLE_Msk (1UL << PMU_INTENCLR_CNT10_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 10 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT11_ENABLE_Pos 11U /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT11_ENABLE_Msk (1UL << PMU_INTENCLR_CNT11_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 11 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT12_ENABLE_Pos 12U /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT12_ENABLE_Msk (1UL << PMU_INTENCLR_CNT12_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 12 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT13_ENABLE_Pos 13U /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT13_ENABLE_Msk (1UL << PMU_INTENCLR_CNT13_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 13 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT14_ENABLE_Pos 14U /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT14_ENABLE_Msk (1UL << PMU_INTENCLR_CNT14_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 14 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT15_ENABLE_Pos 15U /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT15_ENABLE_Msk (1UL << PMU_INTENCLR_CNT15_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 15 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT16_ENABLE_Pos 16U /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT16_ENABLE_Msk (1UL << PMU_INTENCLR_CNT16_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 16 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT17_ENABLE_Pos 17U /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT17_ENABLE_Msk (1UL << PMU_INTENCLR_CNT17_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 17 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT18_ENABLE_Pos 18U /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT18_ENABLE_Msk (1UL << PMU_INTENCLR_CNT18_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 18 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT19_ENABLE_Pos 19U /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT19_ENABLE_Msk (1UL << PMU_INTENCLR_CNT19_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 19 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT20_ENABLE_Pos 20U /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT20_ENABLE_Msk (1UL << PMU_INTENCLR_CNT20_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 20 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT21_ENABLE_Pos 21U /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT21_ENABLE_Msk (1UL << PMU_INTENCLR_CNT21_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 21 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT22_ENABLE_Pos 22U /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT22_ENABLE_Msk (1UL << PMU_INTENCLR_CNT22_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 22 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT23_ENABLE_Pos 23U /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT23_ENABLE_Msk (1UL << PMU_INTENCLR_CNT23_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 23 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT24_ENABLE_Pos 24U /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT24_ENABLE_Msk (1UL << PMU_INTENCLR_CNT24_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 24 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT25_ENABLE_Pos 25U /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT25_ENABLE_Msk (1UL << PMU_INTENCLR_CNT25_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 25 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT26_ENABLE_Pos 26U /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT26_ENABLE_Msk (1UL << PMU_INTENCLR_CNT26_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 26 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT27_ENABLE_Pos 27U /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT27_ENABLE_Msk (1UL << PMU_INTENCLR_CNT27_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 27 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT28_ENABLE_Pos 28U /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT28_ENABLE_Msk (1UL << PMU_INTENCLR_CNT28_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 28 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT29_ENABLE_Pos 29U /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT29_ENABLE_Msk (1UL << PMU_INTENCLR_CNT29_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 29 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CNT30_ENABLE_Pos 30U /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CNT30_ENABLE_Msk (1UL << PMU_INTENCLR_CNT30_ENABLE_Pos) /*!< PMU INTENCLR: Event Counter 30 Interrupt Enable Clear Mask */ + +#define PMU_INTENCLR_CYCCNT_ENABLE_Pos 31U /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Position */ +#define PMU_INTENCLR_CYCCNT_ENABLE_Msk (1UL << PMU_INTENCLR_CYCCNT_ENABLE_Pos) /*!< PMU INTENCLR: Cycle Counter Interrupt Enable Clear Mask */ + +/** \brief PMU Overflow Flag Status Set Register Definitions */ + +#define PMU_OVSSET_CNT0_STATUS_Pos 0U /*!< PMU OVSSET: Event Counter 0 Overflow Set Position */ +#define PMU_OVSSET_CNT0_STATUS_Msk (1UL /*<< PMU_OVSSET_CNT0_STATUS_Pos*/) /*!< PMU OVSSET: Event Counter 0 Overflow Set Mask */ + +#define PMU_OVSSET_CNT1_STATUS_Pos 1U /*!< PMU OVSSET: Event Counter 1 Overflow Set Position */ +#define PMU_OVSSET_CNT1_STATUS_Msk (1UL << PMU_OVSSET_CNT1_STATUS_Pos) /*!< PMU OVSSET: Event Counter 1 Overflow Set Mask */ + +#define PMU_OVSSET_CNT2_STATUS_Pos 2U /*!< PMU OVSSET: Event Counter 2 Overflow Set Position */ +#define PMU_OVSSET_CNT2_STATUS_Msk (1UL << PMU_OVSSET_CNT2_STATUS_Pos) /*!< PMU OVSSET: Event Counter 2 Overflow Set Mask */ + +#define PMU_OVSSET_CNT3_STATUS_Pos 3U /*!< PMU OVSSET: Event Counter 3 Overflow Set Position */ +#define PMU_OVSSET_CNT3_STATUS_Msk (1UL << PMU_OVSSET_CNT3_STATUS_Pos) /*!< PMU OVSSET: Event Counter 3 Overflow Set Mask */ + +#define PMU_OVSSET_CNT4_STATUS_Pos 4U /*!< PMU OVSSET: Event Counter 4 Overflow Set Position */ +#define PMU_OVSSET_CNT4_STATUS_Msk (1UL << PMU_OVSSET_CNT4_STATUS_Pos) /*!< PMU OVSSET: Event Counter 4 Overflow Set Mask */ + +#define PMU_OVSSET_CNT5_STATUS_Pos 5U /*!< PMU OVSSET: Event Counter 5 Overflow Set Position */ +#define PMU_OVSSET_CNT5_STATUS_Msk (1UL << PMU_OVSSET_CNT5_STATUS_Pos) /*!< PMU OVSSET: Event Counter 5 Overflow Set Mask */ + +#define PMU_OVSSET_CNT6_STATUS_Pos 6U /*!< PMU OVSSET: Event Counter 6 Overflow Set Position */ +#define PMU_OVSSET_CNT6_STATUS_Msk (1UL << PMU_OVSSET_CNT6_STATUS_Pos) /*!< PMU OVSSET: Event Counter 6 Overflow Set Mask */ + +#define PMU_OVSSET_CNT7_STATUS_Pos 7U /*!< PMU OVSSET: Event Counter 7 Overflow Set Position */ +#define PMU_OVSSET_CNT7_STATUS_Msk (1UL << PMU_OVSSET_CNT7_STATUS_Pos) /*!< PMU OVSSET: Event Counter 7 Overflow Set Mask */ + +#define PMU_OVSSET_CNT8_STATUS_Pos 8U /*!< PMU OVSSET: Event Counter 8 Overflow Set Position */ +#define PMU_OVSSET_CNT8_STATUS_Msk (1UL << PMU_OVSSET_CNT8_STATUS_Pos) /*!< PMU OVSSET: Event Counter 8 Overflow Set Mask */ + +#define PMU_OVSSET_CNT9_STATUS_Pos 9U /*!< PMU OVSSET: Event Counter 9 Overflow Set Position */ +#define PMU_OVSSET_CNT9_STATUS_Msk (1UL << PMU_OVSSET_CNT9_STATUS_Pos) /*!< PMU OVSSET: Event Counter 9 Overflow Set Mask */ + +#define PMU_OVSSET_CNT10_STATUS_Pos 10U /*!< PMU OVSSET: Event Counter 10 Overflow Set Position */ +#define PMU_OVSSET_CNT10_STATUS_Msk (1UL << PMU_OVSSET_CNT10_STATUS_Pos) /*!< PMU OVSSET: Event Counter 10 Overflow Set Mask */ + +#define PMU_OVSSET_CNT11_STATUS_Pos 11U /*!< PMU OVSSET: Event Counter 11 Overflow Set Position */ +#define PMU_OVSSET_CNT11_STATUS_Msk (1UL << PMU_OVSSET_CNT11_STATUS_Pos) /*!< PMU OVSSET: Event Counter 11 Overflow Set Mask */ + +#define PMU_OVSSET_CNT12_STATUS_Pos 12U /*!< PMU OVSSET: Event Counter 12 Overflow Set Position */ +#define PMU_OVSSET_CNT12_STATUS_Msk (1UL << PMU_OVSSET_CNT12_STATUS_Pos) /*!< PMU OVSSET: Event Counter 12 Overflow Set Mask */ + +#define PMU_OVSSET_CNT13_STATUS_Pos 13U /*!< PMU OVSSET: Event Counter 13 Overflow Set Position */ +#define PMU_OVSSET_CNT13_STATUS_Msk (1UL << PMU_OVSSET_CNT13_STATUS_Pos) /*!< PMU OVSSET: Event Counter 13 Overflow Set Mask */ + +#define PMU_OVSSET_CNT14_STATUS_Pos 14U /*!< PMU OVSSET: Event Counter 14 Overflow Set Position */ +#define PMU_OVSSET_CNT14_STATUS_Msk (1UL << PMU_OVSSET_CNT14_STATUS_Pos) /*!< PMU OVSSET: Event Counter 14 Overflow Set Mask */ + +#define PMU_OVSSET_CNT15_STATUS_Pos 15U /*!< PMU OVSSET: Event Counter 15 Overflow Set Position */ +#define PMU_OVSSET_CNT15_STATUS_Msk (1UL << PMU_OVSSET_CNT15_STATUS_Pos) /*!< PMU OVSSET: Event Counter 15 Overflow Set Mask */ + +#define PMU_OVSSET_CNT16_STATUS_Pos 16U /*!< PMU OVSSET: Event Counter 16 Overflow Set Position */ +#define PMU_OVSSET_CNT16_STATUS_Msk (1UL << PMU_OVSSET_CNT16_STATUS_Pos) /*!< PMU OVSSET: Event Counter 16 Overflow Set Mask */ + +#define PMU_OVSSET_CNT17_STATUS_Pos 17U /*!< PMU OVSSET: Event Counter 17 Overflow Set Position */ +#define PMU_OVSSET_CNT17_STATUS_Msk (1UL << PMU_OVSSET_CNT17_STATUS_Pos) /*!< PMU OVSSET: Event Counter 17 Overflow Set Mask */ + +#define PMU_OVSSET_CNT18_STATUS_Pos 18U /*!< PMU OVSSET: Event Counter 18 Overflow Set Position */ +#define PMU_OVSSET_CNT18_STATUS_Msk (1UL << PMU_OVSSET_CNT18_STATUS_Pos) /*!< PMU OVSSET: Event Counter 18 Overflow Set Mask */ + +#define PMU_OVSSET_CNT19_STATUS_Pos 19U /*!< PMU OVSSET: Event Counter 19 Overflow Set Position */ +#define PMU_OVSSET_CNT19_STATUS_Msk (1UL << PMU_OVSSET_CNT19_STATUS_Pos) /*!< PMU OVSSET: Event Counter 19 Overflow Set Mask */ + +#define PMU_OVSSET_CNT20_STATUS_Pos 20U /*!< PMU OVSSET: Event Counter 20 Overflow Set Position */ +#define PMU_OVSSET_CNT20_STATUS_Msk (1UL << PMU_OVSSET_CNT20_STATUS_Pos) /*!< PMU OVSSET: Event Counter 20 Overflow Set Mask */ + +#define PMU_OVSSET_CNT21_STATUS_Pos 21U /*!< PMU OVSSET: Event Counter 21 Overflow Set Position */ +#define PMU_OVSSET_CNT21_STATUS_Msk (1UL << PMU_OVSSET_CNT21_STATUS_Pos) /*!< PMU OVSSET: Event Counter 21 Overflow Set Mask */ + +#define PMU_OVSSET_CNT22_STATUS_Pos 22U /*!< PMU OVSSET: Event Counter 22 Overflow Set Position */ +#define PMU_OVSSET_CNT22_STATUS_Msk (1UL << PMU_OVSSET_CNT22_STATUS_Pos) /*!< PMU OVSSET: Event Counter 22 Overflow Set Mask */ + +#define PMU_OVSSET_CNT23_STATUS_Pos 23U /*!< PMU OVSSET: Event Counter 23 Overflow Set Position */ +#define PMU_OVSSET_CNT23_STATUS_Msk (1UL << PMU_OVSSET_CNT23_STATUS_Pos) /*!< PMU OVSSET: Event Counter 23 Overflow Set Mask */ + +#define PMU_OVSSET_CNT24_STATUS_Pos 24U /*!< PMU OVSSET: Event Counter 24 Overflow Set Position */ +#define PMU_OVSSET_CNT24_STATUS_Msk (1UL << PMU_OVSSET_CNT24_STATUS_Pos) /*!< PMU OVSSET: Event Counter 24 Overflow Set Mask */ + +#define PMU_OVSSET_CNT25_STATUS_Pos 25U /*!< PMU OVSSET: Event Counter 25 Overflow Set Position */ +#define PMU_OVSSET_CNT25_STATUS_Msk (1UL << PMU_OVSSET_CNT25_STATUS_Pos) /*!< PMU OVSSET: Event Counter 25 Overflow Set Mask */ + +#define PMU_OVSSET_CNT26_STATUS_Pos 26U /*!< PMU OVSSET: Event Counter 26 Overflow Set Position */ +#define PMU_OVSSET_CNT26_STATUS_Msk (1UL << PMU_OVSSET_CNT26_STATUS_Pos) /*!< PMU OVSSET: Event Counter 26 Overflow Set Mask */ + +#define PMU_OVSSET_CNT27_STATUS_Pos 27U /*!< PMU OVSSET: Event Counter 27 Overflow Set Position */ +#define PMU_OVSSET_CNT27_STATUS_Msk (1UL << PMU_OVSSET_CNT27_STATUS_Pos) /*!< PMU OVSSET: Event Counter 27 Overflow Set Mask */ + +#define PMU_OVSSET_CNT28_STATUS_Pos 28U /*!< PMU OVSSET: Event Counter 28 Overflow Set Position */ +#define PMU_OVSSET_CNT28_STATUS_Msk (1UL << PMU_OVSSET_CNT28_STATUS_Pos) /*!< PMU OVSSET: Event Counter 28 Overflow Set Mask */ + +#define PMU_OVSSET_CNT29_STATUS_Pos 29U /*!< PMU OVSSET: Event Counter 29 Overflow Set Position */ +#define PMU_OVSSET_CNT29_STATUS_Msk (1UL << PMU_OVSSET_CNT29_STATUS_Pos) /*!< PMU OVSSET: Event Counter 29 Overflow Set Mask */ + +#define PMU_OVSSET_CNT30_STATUS_Pos 30U /*!< PMU OVSSET: Event Counter 30 Overflow Set Position */ +#define PMU_OVSSET_CNT30_STATUS_Msk (1UL << PMU_OVSSET_CNT30_STATUS_Pos) /*!< PMU OVSSET: Event Counter 30 Overflow Set Mask */ + +#define PMU_OVSSET_CYCCNT_STATUS_Pos 31U /*!< PMU OVSSET: Cycle Counter Overflow Set Position */ +#define PMU_OVSSET_CYCCNT_STATUS_Msk (1UL << PMU_OVSSET_CYCCNT_STATUS_Pos) /*!< PMU OVSSET: Cycle Counter Overflow Set Mask */ + +/** \brief PMU Overflow Flag Status Clear Register Definitions */ + +#define PMU_OVSCLR_CNT0_STATUS_Pos 0U /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Position */ +#define PMU_OVSCLR_CNT0_STATUS_Msk (1UL /*<< PMU_OVSCLR_CNT0_STATUS_Pos*/) /*!< PMU OVSCLR: Event Counter 0 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT1_STATUS_Pos 1U /*!< PMU OVSCLR: Event Counter 1 Overflow Clear Position */ +#define PMU_OVSCLR_CNT1_STATUS_Msk (1UL << PMU_OVSCLR_CNT1_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 1 Overflow Clear */ + +#define PMU_OVSCLR_CNT2_STATUS_Pos 2U /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Position */ +#define PMU_OVSCLR_CNT2_STATUS_Msk (1UL << PMU_OVSCLR_CNT2_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 2 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT3_STATUS_Pos 3U /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Position */ +#define PMU_OVSCLR_CNT3_STATUS_Msk (1UL << PMU_OVSCLR_CNT3_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 3 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT4_STATUS_Pos 4U /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Position */ +#define PMU_OVSCLR_CNT4_STATUS_Msk (1UL << PMU_OVSCLR_CNT4_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 4 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT5_STATUS_Pos 5U /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Position */ +#define PMU_OVSCLR_CNT5_STATUS_Msk (1UL << PMU_OVSCLR_CNT5_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 5 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT6_STATUS_Pos 6U /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Position */ +#define PMU_OVSCLR_CNT6_STATUS_Msk (1UL << PMU_OVSCLR_CNT6_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 6 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT7_STATUS_Pos 7U /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Position */ +#define PMU_OVSCLR_CNT7_STATUS_Msk (1UL << PMU_OVSCLR_CNT7_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 7 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT8_STATUS_Pos 8U /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Position */ +#define PMU_OVSCLR_CNT8_STATUS_Msk (1UL << PMU_OVSCLR_CNT8_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 8 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT9_STATUS_Pos 9U /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Position */ +#define PMU_OVSCLR_CNT9_STATUS_Msk (1UL << PMU_OVSCLR_CNT9_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 9 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT10_STATUS_Pos 10U /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Position */ +#define PMU_OVSCLR_CNT10_STATUS_Msk (1UL << PMU_OVSCLR_CNT10_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 10 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT11_STATUS_Pos 11U /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Position */ +#define PMU_OVSCLR_CNT11_STATUS_Msk (1UL << PMU_OVSCLR_CNT11_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 11 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT12_STATUS_Pos 12U /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Position */ +#define PMU_OVSCLR_CNT12_STATUS_Msk (1UL << PMU_OVSCLR_CNT12_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 12 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT13_STATUS_Pos 13U /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Position */ +#define PMU_OVSCLR_CNT13_STATUS_Msk (1UL << PMU_OVSCLR_CNT13_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 13 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT14_STATUS_Pos 14U /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Position */ +#define PMU_OVSCLR_CNT14_STATUS_Msk (1UL << PMU_OVSCLR_CNT14_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 14 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT15_STATUS_Pos 15U /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Position */ +#define PMU_OVSCLR_CNT15_STATUS_Msk (1UL << PMU_OVSCLR_CNT15_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 15 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT16_STATUS_Pos 16U /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Position */ +#define PMU_OVSCLR_CNT16_STATUS_Msk (1UL << PMU_OVSCLR_CNT16_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 16 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT17_STATUS_Pos 17U /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Position */ +#define PMU_OVSCLR_CNT17_STATUS_Msk (1UL << PMU_OVSCLR_CNT17_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 17 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT18_STATUS_Pos 18U /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Position */ +#define PMU_OVSCLR_CNT18_STATUS_Msk (1UL << PMU_OVSCLR_CNT18_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 18 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT19_STATUS_Pos 19U /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Position */ +#define PMU_OVSCLR_CNT19_STATUS_Msk (1UL << PMU_OVSCLR_CNT19_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 19 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT20_STATUS_Pos 20U /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Position */ +#define PMU_OVSCLR_CNT20_STATUS_Msk (1UL << PMU_OVSCLR_CNT20_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 20 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT21_STATUS_Pos 21U /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Position */ +#define PMU_OVSCLR_CNT21_STATUS_Msk (1UL << PMU_OVSCLR_CNT21_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 21 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT22_STATUS_Pos 22U /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Position */ +#define PMU_OVSCLR_CNT22_STATUS_Msk (1UL << PMU_OVSCLR_CNT22_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 22 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT23_STATUS_Pos 23U /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Position */ +#define PMU_OVSCLR_CNT23_STATUS_Msk (1UL << PMU_OVSCLR_CNT23_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 23 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT24_STATUS_Pos 24U /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Position */ +#define PMU_OVSCLR_CNT24_STATUS_Msk (1UL << PMU_OVSCLR_CNT24_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 24 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT25_STATUS_Pos 25U /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Position */ +#define PMU_OVSCLR_CNT25_STATUS_Msk (1UL << PMU_OVSCLR_CNT25_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 25 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT26_STATUS_Pos 26U /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Position */ +#define PMU_OVSCLR_CNT26_STATUS_Msk (1UL << PMU_OVSCLR_CNT26_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 26 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT27_STATUS_Pos 27U /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Position */ +#define PMU_OVSCLR_CNT27_STATUS_Msk (1UL << PMU_OVSCLR_CNT27_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 27 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT28_STATUS_Pos 28U /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Position */ +#define PMU_OVSCLR_CNT28_STATUS_Msk (1UL << PMU_OVSCLR_CNT28_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 28 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT29_STATUS_Pos 29U /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Position */ +#define PMU_OVSCLR_CNT29_STATUS_Msk (1UL << PMU_OVSCLR_CNT29_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 29 Overflow Clear Mask */ + +#define PMU_OVSCLR_CNT30_STATUS_Pos 30U /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Position */ +#define PMU_OVSCLR_CNT30_STATUS_Msk (1UL << PMU_OVSCLR_CNT30_STATUS_Pos) /*!< PMU OVSCLR: Event Counter 30 Overflow Clear Mask */ + +#define PMU_OVSCLR_CYCCNT_STATUS_Pos 31U /*!< PMU OVSCLR: Cycle Counter Overflow Clear Position */ +#define PMU_OVSCLR_CYCCNT_STATUS_Msk (1UL << PMU_OVSCLR_CYCCNT_STATUS_Pos) /*!< PMU OVSCLR: Cycle Counter Overflow Clear Mask */ + +/** \brief PMU Software Increment Counter */ + +#define PMU_SWINC_CNT0_Pos 0U /*!< PMU SWINC: Event Counter 0 Software Increment Position */ +#define PMU_SWINC_CNT0_Msk (1UL /*<< PMU_SWINC_CNT0_Pos */) /*!< PMU SWINC: Event Counter 0 Software Increment Mask */ + +#define PMU_SWINC_CNT1_Pos 1U /*!< PMU SWINC: Event Counter 1 Software Increment Position */ +#define PMU_SWINC_CNT1_Msk (1UL << PMU_SWINC_CNT1_Pos) /*!< PMU SWINC: Event Counter 1 Software Increment Mask */ + +#define PMU_SWINC_CNT2_Pos 2U /*!< PMU SWINC: Event Counter 2 Software Increment Position */ +#define PMU_SWINC_CNT2_Msk (1UL << PMU_SWINC_CNT2_Pos) /*!< PMU SWINC: Event Counter 2 Software Increment Mask */ + +#define PMU_SWINC_CNT3_Pos 3U /*!< PMU SWINC: Event Counter 3 Software Increment Position */ +#define PMU_SWINC_CNT3_Msk (1UL << PMU_SWINC_CNT3_Pos) /*!< PMU SWINC: Event Counter 3 Software Increment Mask */ + +#define PMU_SWINC_CNT4_Pos 4U /*!< PMU SWINC: Event Counter 4 Software Increment Position */ +#define PMU_SWINC_CNT4_Msk (1UL << PMU_SWINC_CNT4_Pos) /*!< PMU SWINC: Event Counter 4 Software Increment Mask */ + +#define PMU_SWINC_CNT5_Pos 5U /*!< PMU SWINC: Event Counter 5 Software Increment Position */ +#define PMU_SWINC_CNT5_Msk (1UL << PMU_SWINC_CNT5_Pos) /*!< PMU SWINC: Event Counter 5 Software Increment Mask */ + +#define PMU_SWINC_CNT6_Pos 6U /*!< PMU SWINC: Event Counter 6 Software Increment Position */ +#define PMU_SWINC_CNT6_Msk (1UL << PMU_SWINC_CNT6_Pos) /*!< PMU SWINC: Event Counter 6 Software Increment Mask */ + +#define PMU_SWINC_CNT7_Pos 7U /*!< PMU SWINC: Event Counter 7 Software Increment Position */ +#define PMU_SWINC_CNT7_Msk (1UL << PMU_SWINC_CNT7_Pos) /*!< PMU SWINC: Event Counter 7 Software Increment Mask */ + +#define PMU_SWINC_CNT8_Pos 8U /*!< PMU SWINC: Event Counter 8 Software Increment Position */ +#define PMU_SWINC_CNT8_Msk (1UL << PMU_SWINC_CNT8_Pos) /*!< PMU SWINC: Event Counter 8 Software Increment Mask */ + +#define PMU_SWINC_CNT9_Pos 9U /*!< PMU SWINC: Event Counter 9 Software Increment Position */ +#define PMU_SWINC_CNT9_Msk (1UL << PMU_SWINC_CNT9_Pos) /*!< PMU SWINC: Event Counter 9 Software Increment Mask */ + +#define PMU_SWINC_CNT10_Pos 10U /*!< PMU SWINC: Event Counter 10 Software Increment Position */ +#define PMU_SWINC_CNT10_Msk (1UL << PMU_SWINC_CNT10_Pos) /*!< PMU SWINC: Event Counter 10 Software Increment Mask */ + +#define PMU_SWINC_CNT11_Pos 11U /*!< PMU SWINC: Event Counter 11 Software Increment Position */ +#define PMU_SWINC_CNT11_Msk (1UL << PMU_SWINC_CNT11_Pos) /*!< PMU SWINC: Event Counter 11 Software Increment Mask */ + +#define PMU_SWINC_CNT12_Pos 12U /*!< PMU SWINC: Event Counter 12 Software Increment Position */ +#define PMU_SWINC_CNT12_Msk (1UL << PMU_SWINC_CNT12_Pos) /*!< PMU SWINC: Event Counter 12 Software Increment Mask */ + +#define PMU_SWINC_CNT13_Pos 13U /*!< PMU SWINC: Event Counter 13 Software Increment Position */ +#define PMU_SWINC_CNT13_Msk (1UL << PMU_SWINC_CNT13_Pos) /*!< PMU SWINC: Event Counter 13 Software Increment Mask */ + +#define PMU_SWINC_CNT14_Pos 14U /*!< PMU SWINC: Event Counter 14 Software Increment Position */ +#define PMU_SWINC_CNT14_Msk (1UL << PMU_SWINC_CNT14_Pos) /*!< PMU SWINC: Event Counter 14 Software Increment Mask */ + +#define PMU_SWINC_CNT15_Pos 15U /*!< PMU SWINC: Event Counter 15 Software Increment Position */ +#define PMU_SWINC_CNT15_Msk (1UL << PMU_SWINC_CNT15_Pos) /*!< PMU SWINC: Event Counter 15 Software Increment Mask */ + +#define PMU_SWINC_CNT16_Pos 16U /*!< PMU SWINC: Event Counter 16 Software Increment Position */ +#define PMU_SWINC_CNT16_Msk (1UL << PMU_SWINC_CNT16_Pos) /*!< PMU SWINC: Event Counter 16 Software Increment Mask */ + +#define PMU_SWINC_CNT17_Pos 17U /*!< PMU SWINC: Event Counter 17 Software Increment Position */ +#define PMU_SWINC_CNT17_Msk (1UL << PMU_SWINC_CNT17_Pos) /*!< PMU SWINC: Event Counter 17 Software Increment Mask */ + +#define PMU_SWINC_CNT18_Pos 18U /*!< PMU SWINC: Event Counter 18 Software Increment Position */ +#define PMU_SWINC_CNT18_Msk (1UL << PMU_SWINC_CNT18_Pos) /*!< PMU SWINC: Event Counter 18 Software Increment Mask */ + +#define PMU_SWINC_CNT19_Pos 19U /*!< PMU SWINC: Event Counter 19 Software Increment Position */ +#define PMU_SWINC_CNT19_Msk (1UL << PMU_SWINC_CNT19_Pos) /*!< PMU SWINC: Event Counter 19 Software Increment Mask */ + +#define PMU_SWINC_CNT20_Pos 20U /*!< PMU SWINC: Event Counter 20 Software Increment Position */ +#define PMU_SWINC_CNT20_Msk (1UL << PMU_SWINC_CNT20_Pos) /*!< PMU SWINC: Event Counter 20 Software Increment Mask */ + +#define PMU_SWINC_CNT21_Pos 21U /*!< PMU SWINC: Event Counter 21 Software Increment Position */ +#define PMU_SWINC_CNT21_Msk (1UL << PMU_SWINC_CNT21_Pos) /*!< PMU SWINC: Event Counter 21 Software Increment Mask */ + +#define PMU_SWINC_CNT22_Pos 22U /*!< PMU SWINC: Event Counter 22 Software Increment Position */ +#define PMU_SWINC_CNT22_Msk (1UL << PMU_SWINC_CNT22_Pos) /*!< PMU SWINC: Event Counter 22 Software Increment Mask */ + +#define PMU_SWINC_CNT23_Pos 23U /*!< PMU SWINC: Event Counter 23 Software Increment Position */ +#define PMU_SWINC_CNT23_Msk (1UL << PMU_SWINC_CNT23_Pos) /*!< PMU SWINC: Event Counter 23 Software Increment Mask */ + +#define PMU_SWINC_CNT24_Pos 24U /*!< PMU SWINC: Event Counter 24 Software Increment Position */ +#define PMU_SWINC_CNT24_Msk (1UL << PMU_SWINC_CNT24_Pos) /*!< PMU SWINC: Event Counter 24 Software Increment Mask */ + +#define PMU_SWINC_CNT25_Pos 25U /*!< PMU SWINC: Event Counter 25 Software Increment Position */ +#define PMU_SWINC_CNT25_Msk (1UL << PMU_SWINC_CNT25_Pos) /*!< PMU SWINC: Event Counter 25 Software Increment Mask */ + +#define PMU_SWINC_CNT26_Pos 26U /*!< PMU SWINC: Event Counter 26 Software Increment Position */ +#define PMU_SWINC_CNT26_Msk (1UL << PMU_SWINC_CNT26_Pos) /*!< PMU SWINC: Event Counter 26 Software Increment Mask */ + +#define PMU_SWINC_CNT27_Pos 27U /*!< PMU SWINC: Event Counter 27 Software Increment Position */ +#define PMU_SWINC_CNT27_Msk (1UL << PMU_SWINC_CNT27_Pos) /*!< PMU SWINC: Event Counter 27 Software Increment Mask */ + +#define PMU_SWINC_CNT28_Pos 28U /*!< PMU SWINC: Event Counter 28 Software Increment Position */ +#define PMU_SWINC_CNT28_Msk (1UL << PMU_SWINC_CNT28_Pos) /*!< PMU SWINC: Event Counter 28 Software Increment Mask */ + +#define PMU_SWINC_CNT29_Pos 29U /*!< PMU SWINC: Event Counter 29 Software Increment Position */ +#define PMU_SWINC_CNT29_Msk (1UL << PMU_SWINC_CNT29_Pos) /*!< PMU SWINC: Event Counter 29 Software Increment Mask */ + +#define PMU_SWINC_CNT30_Pos 30U /*!< PMU SWINC: Event Counter 30 Software Increment Position */ +#define PMU_SWINC_CNT30_Msk (1UL << PMU_SWINC_CNT30_Pos) /*!< PMU SWINC: Event Counter 30 Software Increment Mask */ + +/** \brief PMU Control Register Definitions */ + +#define PMU_CTRL_ENABLE_Pos 0U /*!< PMU CTRL: ENABLE Position */ +#define PMU_CTRL_ENABLE_Msk (1UL /*<< PMU_CTRL_ENABLE_Pos*/) /*!< PMU CTRL: ENABLE Mask */ + +#define PMU_CTRL_EVENTCNT_RESET_Pos 1U /*!< PMU CTRL: Event Counter Reset Position */ +#define PMU_CTRL_EVENTCNT_RESET_Msk (1UL << PMU_CTRL_EVENTCNT_RESET_Pos) /*!< PMU CTRL: Event Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_RESET_Pos 2U /*!< PMU CTRL: Cycle Counter Reset Position */ +#define PMU_CTRL_CYCCNT_RESET_Msk (1UL << PMU_CTRL_CYCCNT_RESET_Pos) /*!< PMU CTRL: Cycle Counter Reset Mask */ + +#define PMU_CTRL_CYCCNT_DISABLE_Pos 5U /*!< PMU CTRL: Disable Cycle Counter Position */ +#define PMU_CTRL_CYCCNT_DISABLE_Msk (1UL << PMU_CTRL_CYCCNT_DISABLE_Pos) /*!< PMU CTRL: Disable Cycle Counter Mask */ + +#define PMU_CTRL_FRZ_ON_OV_Pos 9U /*!< PMU CTRL: Freeze-on-overflow Position */ +#define PMU_CTRL_FRZ_ON_OV_Msk (1UL << PMU_CTRL_FRZ_ON_OVERFLOW_Pos) /*!< PMU CTRL: Freeze-on-overflow Mask */ + +#define PMU_CTRL_TRACE_ON_OV_Pos 11U /*!< PMU CTRL: Trace-on-overflow Position */ +#define PMU_CTRL_TRACE_ON_OV_Msk (1UL << PMU_CTRL_TRACE_ON_OVERFLOW_Pos) /*!< PMU CTRL: Trace-on-overflow Mask */ + +/** \brief PMU Type Register Definitions */ + +#define PMU_TYPE_NUM_CNTS_Pos 0U /*!< PMU TYPE: Number of Counters Position */ +#define PMU_TYPE_NUM_CNTS_Msk (8UL /*<< PMU_TYPE_NUM_CNTS_Pos*/) /*!< PMU TYPE: Number of Counters Mask */ + +#define PMU_TYPE_SIZE_CNTS_Pos 8U /*!< PMU TYPE: Size of Counters Position */ +#define PMU_TYPE_SIZE_CNTS_Msk (6UL << PMU_TYPE_SIZE_CNTS_Pos) /*!< PMU TYPE: Size of Counters Mask */ + +#define PMU_TYPE_CYCCNT_PRESENT_Pos 14U /*!< PMU TYPE: Cycle Counter Present Position */ +#define PMU_TYPE_CYCCNT_PRESENT_Msk (1UL << PMU_TYPE_CYCCNT_PRESENT_Pos) /*!< PMU TYPE: Cycle Counter Present Mask */ + +#define PMU_TYPE_FRZ_OV_SUPPORT_Pos 21U /*!< PMU TYPE: Freeze-on-overflow Support Position */ +#define PMU_TYPE_FRZ_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Freeze-on-overflow Support Mask */ + +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Pos 23U /*!< PMU TYPE: Trace-on-overflow Support Position */ +#define PMU_TYPE_TRACE_ON_OV_SUPPORT_Msk (1UL << PMU_TYPE_FRZ_OV_SUPPORT_Pos) /*!< PMU TYPE: Trace-on-overflow Support Mask */ + +/*@} end of group CMSIS_PMU */ +#endif + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) MPU Region Limit Address Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Region Base Address Register Alias 1 */ + __IOM uint32_t RLAR_A1; /*!< Offset: 0x018 (R/W) MPU Region Limit Address Register Alias 1 */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Region Base Address Register Alias 2 */ + __IOM uint32_t RLAR_A2; /*!< Offset: 0x020 (R/W) MPU Region Limit Address Register Alias 2 */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Region Base Address Register Alias 3 */ + __IOM uint32_t RLAR_A3; /*!< Offset: 0x028 (R/W) MPU Region Limit Address Register Alias 3 */ + uint32_t RESERVED0[1]; + union { + __IOM uint32_t MAIR[2]; + struct { + __IOM uint32_t MAIR0; /*!< Offset: 0x030 (R/W) MPU Memory Attribute Indirection Register 0 */ + __IOM uint32_t MAIR1; /*!< Offset: 0x034 (R/W) MPU Memory Attribute Indirection Register 1 */ + }; + }; +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_BASE_Pos 5U /*!< MPU RBAR: BASE Position */ +#define MPU_RBAR_BASE_Msk (0x7FFFFFFUL << MPU_RBAR_BASE_Pos) /*!< MPU RBAR: BASE Mask */ + +#define MPU_RBAR_SH_Pos 3U /*!< MPU RBAR: SH Position */ +#define MPU_RBAR_SH_Msk (0x3UL << MPU_RBAR_SH_Pos) /*!< MPU RBAR: SH Mask */ + +#define MPU_RBAR_AP_Pos 1U /*!< MPU RBAR: AP Position */ +#define MPU_RBAR_AP_Msk (0x3UL << MPU_RBAR_AP_Pos) /*!< MPU RBAR: AP Mask */ + +#define MPU_RBAR_XN_Pos 0U /*!< MPU RBAR: XN Position */ +#define MPU_RBAR_XN_Msk (01UL /*<< MPU_RBAR_XN_Pos*/) /*!< MPU RBAR: XN Mask */ + +/* MPU Region Limit Address Register Definitions */ +#define MPU_RLAR_LIMIT_Pos 5U /*!< MPU RLAR: LIMIT Position */ +#define MPU_RLAR_LIMIT_Msk (0x7FFFFFFUL << MPU_RLAR_LIMIT_Pos) /*!< MPU RLAR: LIMIT Mask */ + +#define MPU_RLAR_PXN_Pos 4U /*!< MPU RLAR: PXN Position */ +#define MPU_RLAR_PXN_Msk (1UL << MPU_RLAR_PXN_Pos) /*!< MPU RLAR: PXN Mask */ + +#define MPU_RLAR_AttrIndx_Pos 1U /*!< MPU RLAR: AttrIndx Position */ +#define MPU_RLAR_AttrIndx_Msk (7UL << MPU_RLAR_AttrIndx_Pos) /*!< MPU RLAR: AttrIndx Mask */ + +#define MPU_RLAR_EN_Pos 0U /*!< MPU RLAR: Region enable bit Position */ +#define MPU_RLAR_EN_Msk (1UL /*<< MPU_RLAR_EN_Pos*/) /*!< MPU RLAR: Region enable bit Disable Mask */ + +/* MPU Memory Attribute Indirection Register 0 Definitions */ +#define MPU_MAIR0_Attr3_Pos 24U /*!< MPU MAIR0: Attr3 Position */ +#define MPU_MAIR0_Attr3_Msk (0xFFUL << MPU_MAIR0_Attr3_Pos) /*!< MPU MAIR0: Attr3 Mask */ + +#define MPU_MAIR0_Attr2_Pos 16U /*!< MPU MAIR0: Attr2 Position */ +#define MPU_MAIR0_Attr2_Msk (0xFFUL << MPU_MAIR0_Attr2_Pos) /*!< MPU MAIR0: Attr2 Mask */ + +#define MPU_MAIR0_Attr1_Pos 8U /*!< MPU MAIR0: Attr1 Position */ +#define MPU_MAIR0_Attr1_Msk (0xFFUL << MPU_MAIR0_Attr1_Pos) /*!< MPU MAIR0: Attr1 Mask */ + +#define MPU_MAIR0_Attr0_Pos 0U /*!< MPU MAIR0: Attr0 Position */ +#define MPU_MAIR0_Attr0_Msk (0xFFUL /*<< MPU_MAIR0_Attr0_Pos*/) /*!< MPU MAIR0: Attr0 Mask */ + +/* MPU Memory Attribute Indirection Register 1 Definitions */ +#define MPU_MAIR1_Attr7_Pos 24U /*!< MPU MAIR1: Attr7 Position */ +#define MPU_MAIR1_Attr7_Msk (0xFFUL << MPU_MAIR1_Attr7_Pos) /*!< MPU MAIR1: Attr7 Mask */ + +#define MPU_MAIR1_Attr6_Pos 16U /*!< MPU MAIR1: Attr6 Position */ +#define MPU_MAIR1_Attr6_Msk (0xFFUL << MPU_MAIR1_Attr6_Pos) /*!< MPU MAIR1: Attr6 Mask */ + +#define MPU_MAIR1_Attr5_Pos 8U /*!< MPU MAIR1: Attr5 Position */ +#define MPU_MAIR1_Attr5_Msk (0xFFUL << MPU_MAIR1_Attr5_Pos) /*!< MPU MAIR1: Attr5 Mask */ + +#define MPU_MAIR1_Attr4_Pos 0U /*!< MPU MAIR1: Attr4 Position */ +#define MPU_MAIR1_Attr4_Msk (0xFFUL /*<< MPU_MAIR1_Attr4_Pos*/) /*!< MPU MAIR1: Attr4 Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SAU Security Attribution Unit (SAU) + \brief Type definitions for the Security Attribution Unit (SAU) + @{ + */ + +/** + \brief Structure type to access the Security Attribution Unit (SAU). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SAU Control Register */ + __IM uint32_t TYPE; /*!< Offset: 0x004 (R/ ) SAU Type Register */ +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) SAU Region Number Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) SAU Region Base Address Register */ + __IOM uint32_t RLAR; /*!< Offset: 0x010 (R/W) SAU Region Limit Address Register */ +#else + uint32_t RESERVED0[3]; +#endif + __IOM uint32_t SFSR; /*!< Offset: 0x014 (R/W) Secure Fault Status Register */ + __IOM uint32_t SFAR; /*!< Offset: 0x018 (R/W) Secure Fault Address Register */ +} SAU_Type; + +/* SAU Control Register Definitions */ +#define SAU_CTRL_ALLNS_Pos 1U /*!< SAU CTRL: ALLNS Position */ +#define SAU_CTRL_ALLNS_Msk (1UL << SAU_CTRL_ALLNS_Pos) /*!< SAU CTRL: ALLNS Mask */ + +#define SAU_CTRL_ENABLE_Pos 0U /*!< SAU CTRL: ENABLE Position */ +#define SAU_CTRL_ENABLE_Msk (1UL /*<< SAU_CTRL_ENABLE_Pos*/) /*!< SAU CTRL: ENABLE Mask */ + +/* SAU Type Register Definitions */ +#define SAU_TYPE_SREGION_Pos 0U /*!< SAU TYPE: SREGION Position */ +#define SAU_TYPE_SREGION_Msk (0xFFUL /*<< SAU_TYPE_SREGION_Pos*/) /*!< SAU TYPE: SREGION Mask */ + +#if defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) +/* SAU Region Number Register Definitions */ +#define SAU_RNR_REGION_Pos 0U /*!< SAU RNR: REGION Position */ +#define SAU_RNR_REGION_Msk (0xFFUL /*<< SAU_RNR_REGION_Pos*/) /*!< SAU RNR: REGION Mask */ + +/* SAU Region Base Address Register Definitions */ +#define SAU_RBAR_BADDR_Pos 5U /*!< SAU RBAR: BADDR Position */ +#define SAU_RBAR_BADDR_Msk (0x7FFFFFFUL << SAU_RBAR_BADDR_Pos) /*!< SAU RBAR: BADDR Mask */ + +/* SAU Region Limit Address Register Definitions */ +#define SAU_RLAR_LADDR_Pos 5U /*!< SAU RLAR: LADDR Position */ +#define SAU_RLAR_LADDR_Msk (0x7FFFFFFUL << SAU_RLAR_LADDR_Pos) /*!< SAU RLAR: LADDR Mask */ + +#define SAU_RLAR_NSC_Pos 1U /*!< SAU RLAR: NSC Position */ +#define SAU_RLAR_NSC_Msk (1UL << SAU_RLAR_NSC_Pos) /*!< SAU RLAR: NSC Mask */ + +#define SAU_RLAR_ENABLE_Pos 0U /*!< SAU RLAR: ENABLE Position */ +#define SAU_RLAR_ENABLE_Msk (1UL /*<< SAU_RLAR_ENABLE_Pos*/) /*!< SAU RLAR: ENABLE Mask */ + +#endif /* defined (__SAUREGION_PRESENT) && (__SAUREGION_PRESENT == 1U) */ + +/* Secure Fault Status Register Definitions */ +#define SAU_SFSR_LSERR_Pos 7U /*!< SAU SFSR: LSERR Position */ +#define SAU_SFSR_LSERR_Msk (1UL << SAU_SFSR_LSERR_Pos) /*!< SAU SFSR: LSERR Mask */ + +#define SAU_SFSR_SFARVALID_Pos 6U /*!< SAU SFSR: SFARVALID Position */ +#define SAU_SFSR_SFARVALID_Msk (1UL << SAU_SFSR_SFARVALID_Pos) /*!< SAU SFSR: SFARVALID Mask */ + +#define SAU_SFSR_LSPERR_Pos 5U /*!< SAU SFSR: LSPERR Position */ +#define SAU_SFSR_LSPERR_Msk (1UL << SAU_SFSR_LSPERR_Pos) /*!< SAU SFSR: LSPERR Mask */ + +#define SAU_SFSR_INVTRAN_Pos 4U /*!< SAU SFSR: INVTRAN Position */ +#define SAU_SFSR_INVTRAN_Msk (1UL << SAU_SFSR_INVTRAN_Pos) /*!< SAU SFSR: INVTRAN Mask */ + +#define SAU_SFSR_AUVIOL_Pos 3U /*!< SAU SFSR: AUVIOL Position */ +#define SAU_SFSR_AUVIOL_Msk (1UL << SAU_SFSR_AUVIOL_Pos) /*!< SAU SFSR: AUVIOL Mask */ + +#define SAU_SFSR_INVER_Pos 2U /*!< SAU SFSR: INVER Position */ +#define SAU_SFSR_INVER_Msk (1UL << SAU_SFSR_INVER_Pos) /*!< SAU SFSR: INVER Mask */ + +#define SAU_SFSR_INVIS_Pos 1U /*!< SAU SFSR: INVIS Position */ +#define SAU_SFSR_INVIS_Msk (1UL << SAU_SFSR_INVIS_Pos) /*!< SAU SFSR: INVIS Mask */ + +#define SAU_SFSR_INVEP_Pos 0U /*!< SAU SFSR: INVEP Position */ +#define SAU_SFSR_INVEP_Msk (1UL /*<< SAU_SFSR_INVEP_Pos*/) /*!< SAU SFSR: INVEP Mask */ + +/*@} end of group CMSIS_SAU */ +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and VFP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_LSPENS_Pos 29U /*!< FPCCR: LSPENS Position */ +#define FPU_FPCCR_LSPENS_Msk (1UL << FPU_FPCCR_LSPENS_Pos) /*!< FPCCR: LSPENS bit Mask */ + +#define FPU_FPCCR_CLRONRET_Pos 28U /*!< FPCCR: CLRONRET Position */ +#define FPU_FPCCR_CLRONRET_Msk (1UL << FPU_FPCCR_CLRONRET_Pos) /*!< FPCCR: CLRONRET bit Mask */ + +#define FPU_FPCCR_CLRONRETS_Pos 27U /*!< FPCCR: CLRONRETS Position */ +#define FPU_FPCCR_CLRONRETS_Msk (1UL << FPU_FPCCR_CLRONRETS_Pos) /*!< FPCCR: CLRONRETS bit Mask */ + +#define FPU_FPCCR_TS_Pos 26U /*!< FPCCR: TS Position */ +#define FPU_FPCCR_TS_Msk (1UL << FPU_FPCCR_TS_Pos) /*!< FPCCR: TS bit Mask */ + +#define FPU_FPCCR_UFRDY_Pos 10U /*!< FPCCR: UFRDY Position */ +#define FPU_FPCCR_UFRDY_Msk (1UL << FPU_FPCCR_UFRDY_Pos) /*!< FPCCR: UFRDY bit Mask */ + +#define FPU_FPCCR_SPLIMVIOL_Pos 9U /*!< FPCCR: SPLIMVIOL Position */ +#define FPU_FPCCR_SPLIMVIOL_Msk (1UL << FPU_FPCCR_SPLIMVIOL_Pos) /*!< FPCCR: SPLIMVIOL bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_SFRDY_Pos 7U /*!< FPCCR: SFRDY Position */ +#define FPU_FPCCR_SFRDY_Msk (1UL << FPU_FPCCR_SFRDY_Pos) /*!< FPCCR: SFRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_S_Pos 2U /*!< FPCCR: Security status of the FP context bit Position */ +#define FPU_FPCCR_S_Msk (1UL << FPU_FPCCR_S_Pos) /*!< FPCCR: Security status of the FP context bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +#define FPU_FPDSCR_FZ16_Pos 19U /*!< FPDSCR: FZ16 bit Position */ +#define FPU_FPDSCR_FZ16_Msk (1UL << FPU_FPDSCR_FZ16_Pos) /*!< FPDSCR: FZ16 bit Mask */ + +#define FPU_FPDSCR_LTPSIZE_Pos 16U /*!< FPDSCR: LTPSIZE bit Position */ +#define FPU_FPDSCR_LTPSIZE_Msk (7UL << FPU_FPDSCR_LTPSIZE_Pos) /*!< FPDSCR: LTPSIZE bit Mask */ + +/* Media and VFP Feature Register 0 Definitions */ +#define FPU_MVFR0_FPRound_Pos 28U /*!< MVFR0: FPRound bits Position */ +#define FPU_MVFR0_FPRound_Msk (0xFUL << FPU_MVFR0_FPRound_Pos) /*!< MVFR0: FPRound bits Mask */ + +#define FPU_MVFR0_FPSqrt_Pos 20U /*!< MVFR0: FPSqrt bits Position */ +#define FPU_MVFR0_FPSqrt_Msk (0xFUL << FPU_MVFR0_FPSqrt_Pos) /*!< MVFR0: FPSqrt bits Mask */ + +#define FPU_MVFR0_FPDivide_Pos 16U /*!< MVFR0: FPDivide bits Position */ +#define FPU_MVFR0_FPDivide_Msk (0xFUL << FPU_MVFR0_FPDivide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FPDP_Pos 8U /*!< MVFR0: FPDP bits Position */ +#define FPU_MVFR0_FPDP_Msk (0xFUL << FPU_MVFR0_FPDP_Pos) /*!< MVFR0: FPDP bits Mask */ + +#define FPU_MVFR0_FPSP_Pos 4U /*!< MVFR0: FPSP bits Position */ +#define FPU_MVFR0_FPSP_Msk (0xFUL << FPU_MVFR0_FPSP_Pos) /*!< MVFR0: FPSP bits Mask */ + +#define FPU_MVFR0_SIMDReg_Pos 0U /*!< MVFR0: SIMDReg bits Position */ +#define FPU_MVFR0_SIMDReg_Msk (0xFUL /*<< FPU_MVFR0_SIMDReg_Pos*/) /*!< MVFR0: SIMDReg bits Mask */ + +/* Media and VFP Feature Register 1 Definitions */ +#define FPU_MVFR1_FMAC_Pos 28U /*!< MVFR1: FMAC bits Position */ +#define FPU_MVFR1_FMAC_Msk (0xFUL << FPU_MVFR1_FMAC_Pos) /*!< MVFR1: FMAC bits Mask */ + +#define FPU_MVFR1_FPHP_Pos 24U /*!< MVFR1: FPHP bits Position */ +#define FPU_MVFR1_FPHP_Msk (0xFUL << FPU_MVFR1_FPHP_Pos) /*!< MVFR1: FPHP bits Mask */ + +#define FPU_MVFR1_FP16_Pos 20U /*!< MVFR1: FP16 bits Position */ +#define FPU_MVFR1_FP16_Msk (0xFUL << FPU_MVFR1_FP16_Pos) /*!< MVFR1: FP16 bits Mask */ + +#define FPU_MVFR1_MVE_Pos 8U /*!< MVFR1: MVE bits Position */ +#define FPU_MVFR1_MVE_Msk (0xFUL << FPU_MVFR1_MVE_Pos) /*!< MVFR1: MVE bits Mask */ + +#define FPU_MVFR1_FPDNaN_Pos 4U /*!< MVFR1: FPDNaN bits Position */ +#define FPU_MVFR1_FPDNaN_Msk (0xFUL << FPU_MVFR1_FPDNaN_Pos) /*!< MVFR1: FPDNaN bits Mask */ + +#define FPU_MVFR1_FPFtZ_Pos 0U /*!< MVFR1: FPFtZ bits Position */ +#define FPU_MVFR1_FPFtZ_Msk (0xFUL /*<< FPU_MVFR1_FPFtZ_Pos*/) /*!< MVFR1: FPFtZ bits Mask */ + +/* Media and VFP Feature Register 2 Definitions */ +#define FPU_MVFR2_FPMisc_Pos 4U /*!< MVFR2: FPMisc bits Position */ +#define FPU_MVFR2_FPMisc_Msk (0xFUL << FPU_MVFR2_FPMisc_Pos) /*!< MVFR2: FPMisc bits Mask */ + +/*@} end of group CMSIS_FPU */ + +/* CoreDebug is deprecated. replaced by DCB (Debug Control Block) */ +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief \deprecated Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< \deprecated CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< \deprecated CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESTART_ST_Pos 26U /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Position */ +#define CoreDebug_DHCSR_S_RESTART_ST_Msk (1UL << CoreDebug_DHCSR_S_RESTART_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESTART_ST Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< \deprecated CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_FPD_Pos 23U /*!< \deprecated CoreDebug DHCSR: S_FPD Position */ +#define CoreDebug_DHCSR_S_FPD_Msk (1UL << CoreDebug_DHCSR_S_FPD_Pos) /*!< \deprecated CoreDebug DHCSR: S_FPD Mask */ + +#define CoreDebug_DHCSR_S_SUIDE_Pos 22U /*!< \deprecated CoreDebug DHCSR: S_SUIDE Position */ +#define CoreDebug_DHCSR_S_SUIDE_Msk (1UL << CoreDebug_DHCSR_S_SUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SUIDE Mask */ + +#define CoreDebug_DHCSR_S_NSUIDE_Pos 21U /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Position */ +#define CoreDebug_DHCSR_S_NSUIDE_Msk (1UL << CoreDebug_DHCSR_S_NSUIDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_NSUIDE Mask */ + +#define CoreDebug_DHCSR_S_SDE_Pos 20U /*!< \deprecated CoreDebug DHCSR: S_SDE Position */ +#define CoreDebug_DHCSR_S_SDE_Msk (1UL << CoreDebug_DHCSR_S_SDE_Pos) /*!< \deprecated CoreDebug DHCSR: S_SDE Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< \deprecated CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< \deprecated CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< \deprecated CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< \deprecated CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< \deprecated CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< \deprecated CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_PMOV_Pos 6U /*!< \deprecated CoreDebug DHCSR: C_PMOV Position */ +#define CoreDebug_DHCSR_C_PMOV_Msk (1UL << CoreDebug_DHCSR_C_PMOV_Pos) /*!< \deprecated CoreDebug DHCSR: C_PMOV Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< \deprecated CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< \deprecated CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< \deprecated CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< \deprecated CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< \deprecated CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< \deprecated CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< \deprecated CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< \deprecated CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< \deprecated CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< \deprecated CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< \deprecated CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< \deprecated CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< \deprecated CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< \deprecated CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< \deprecated CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< \deprecated CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< \deprecated CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< \deprecated CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< \deprecated CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< \deprecated CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< \deprecated CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< \deprecated CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< \deprecated CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< \deprecated CoreDebug DEMCR: VC_CORERESET Mask */ + +/* Debug Set Clear Exception and Monitor Control Register Definitions */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_CLR_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_CLR_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: CLR_MON_PEND, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_REQ_Pos 3U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Position */ +#define CoreDebug_DSCEMCR_SET_MON_REQ_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_REQ_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_REQ, Mask */ + +#define CoreDebug_DSCEMCR_SET_MON_PEND_Pos 1U /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Position */ +#define CoreDebug_DSCEMCR_SET_MON_PEND_Msk (1UL << CoreDebug_DSCEMCR_SET_MON_PEND_Pos) /*!< \deprecated CoreDebug DSCEMCR: SET_MON_PEND, Mask */ + +/* Debug Authentication Control Register Definitions */ +#define CoreDebug_DAUTHCTRL_UIDEN_Pos 10U /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_UIDAPEN_Pos 9U /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Position */ +#define CoreDebug_DAUTHCTRL_UIDAPEN_Msk (1UL << CoreDebug_DAUTHCTRL_UIDAPEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: UIDAPEN, Mask */ + +#define CoreDebug_DAUTHCTRL_FSDMA_Pos 8U /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Position */ +#define CoreDebug_DAUTHCTRL_FSDMA_Msk (1UL << CoreDebug_DAUTHCTRL_FSDMA_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: FSDMA, Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Position */ +#define CoreDebug_DAUTHCTRL_INTSPNIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPNIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPNIDEN, Mask */ + +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPNIDENSEL_Msk (1UL << CoreDebug_DAUTHCTRL_SPNIDENSEL_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: SPNIDENSEL Mask */ + +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Position */ +#define CoreDebug_DAUTHCTRL_INTSPIDEN_Msk (1UL << CoreDebug_DAUTHCTRL_INTSPIDEN_Pos) /*!< \deprecated CoreDebug DAUTHCTRL: INTSPIDEN Mask */ + +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Position */ +#define CoreDebug_DAUTHCTRL_SPIDENSEL_Msk (1UL /*<< CoreDebug_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< \deprecated CoreDebug DAUTHCTRL: SPIDENSEL Mask */ + +/* Debug Security Control and Status Register Definitions */ +#define CoreDebug_DSCSR_CDS_Pos 16U /*!< \deprecated CoreDebug DSCSR: CDS Position */ +#define CoreDebug_DSCSR_CDS_Msk (1UL << CoreDebug_DSCSR_CDS_Pos) /*!< \deprecated CoreDebug DSCSR: CDS Mask */ + +#define CoreDebug_DSCSR_SBRSEL_Pos 1U /*!< \deprecated CoreDebug DSCSR: SBRSEL Position */ +#define CoreDebug_DSCSR_SBRSEL_Msk (1UL << CoreDebug_DSCSR_SBRSEL_Pos) /*!< \deprecated CoreDebug DSCSR: SBRSEL Mask */ + +#define CoreDebug_DSCSR_SBRSELEN_Pos 0U /*!< \deprecated CoreDebug DSCSR: SBRSELEN Position */ +#define CoreDebug_DSCSR_SBRSELEN_Msk (1UL /*<< CoreDebug_DSCSR_SBRSELEN_Pos*/) /*!< \deprecated CoreDebug DSCSR: SBRSELEN Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DCB Debug Control Block + \brief Type definitions for the Debug Control Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Control Block Registers (DCB). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ + __OM uint32_t DSCEMCR; /*!< Offset: 0x010 ( /W) Debug Set Clear Exception and Monitor Control Register */ + __IOM uint32_t DAUTHCTRL; /*!< Offset: 0x014 (R/W) Debug Authentication Control Register */ + __IOM uint32_t DSCSR; /*!< Offset: 0x018 (R/W) Debug Security Control and Status Register */ +} DCB_Type; + +/* DHCSR, Debug Halting Control and Status Register Definitions */ +#define DCB_DHCSR_DBGKEY_Pos 16U /*!< DCB DHCSR: Debug key Position */ +#define DCB_DHCSR_DBGKEY_Msk (0xFFFFUL << DCB_DHCSR_DBGKEY_Pos) /*!< DCB DHCSR: Debug key Mask */ + +#define DCB_DHCSR_S_RESTART_ST_Pos 26U /*!< DCB DHCSR: Restart sticky status Position */ +#define DCB_DHCSR_S_RESTART_ST_Msk (0x1UL << DCB_DHCSR_S_RESTART_ST_Pos) /*!< DCB DHCSR: Restart sticky status Mask */ + +#define DCB_DHCSR_S_RESET_ST_Pos 25U /*!< DCB DHCSR: Reset sticky status Position */ +#define DCB_DHCSR_S_RESET_ST_Msk (0x1UL << DCB_DHCSR_S_RESET_ST_Pos) /*!< DCB DHCSR: Reset sticky status Mask */ + +#define DCB_DHCSR_S_RETIRE_ST_Pos 24U /*!< DCB DHCSR: Retire sticky status Position */ +#define DCB_DHCSR_S_RETIRE_ST_Msk (0x1UL << DCB_DHCSR_S_RETIRE_ST_Pos) /*!< DCB DHCSR: Retire sticky status Mask */ + +#define DCB_DHCSR_S_FPD_Pos 23U /*!< DCB DHCSR: Floating-point registers Debuggable Position */ +#define DCB_DHCSR_S_FPD_Msk (0x1UL << DCB_DHCSR_S_FPD_Pos) /*!< DCB DHCSR: Floating-point registers Debuggable Mask */ + +#define DCB_DHCSR_S_SUIDE_Pos 22U /*!< DCB DHCSR: Secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_SUIDE_Msk (0x1UL << DCB_DHCSR_S_SUIDE_Pos) /*!< DCB DHCSR: Secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_NSUIDE_Pos 21U /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Position */ +#define DCB_DHCSR_S_NSUIDE_Msk (0x1UL << DCB_DHCSR_S_NSUIDE_Pos) /*!< DCB DHCSR: Non-secure unprivileged halting debug enabled Mask */ + +#define DCB_DHCSR_S_SDE_Pos 20U /*!< DCB DHCSR: Secure debug enabled Position */ +#define DCB_DHCSR_S_SDE_Msk (0x1UL << DCB_DHCSR_S_SDE_Pos) /*!< DCB DHCSR: Secure debug enabled Mask */ + +#define DCB_DHCSR_S_LOCKUP_Pos 19U /*!< DCB DHCSR: Lockup status Position */ +#define DCB_DHCSR_S_LOCKUP_Msk (0x1UL << DCB_DHCSR_S_LOCKUP_Pos) /*!< DCB DHCSR: Lockup status Mask */ + +#define DCB_DHCSR_S_SLEEP_Pos 18U /*!< DCB DHCSR: Sleeping status Position */ +#define DCB_DHCSR_S_SLEEP_Msk (0x1UL << DCB_DHCSR_S_SLEEP_Pos) /*!< DCB DHCSR: Sleeping status Mask */ + +#define DCB_DHCSR_S_HALT_Pos 17U /*!< DCB DHCSR: Halted status Position */ +#define DCB_DHCSR_S_HALT_Msk (0x1UL << DCB_DHCSR_S_HALT_Pos) /*!< DCB DHCSR: Halted status Mask */ + +#define DCB_DHCSR_S_REGRDY_Pos 16U /*!< DCB DHCSR: Register ready status Position */ +#define DCB_DHCSR_S_REGRDY_Msk (0x1UL << DCB_DHCSR_S_REGRDY_Pos) /*!< DCB DHCSR: Register ready status Mask */ + +#define DCB_DHCSR_C_PMOV_Pos 6U /*!< DCB DHCSR: Halt on PMU overflow control Position */ +#define DCB_DHCSR_C_PMOV_Msk (0x1UL << DCB_DHCSR_C_PMOV_Pos) /*!< DCB DHCSR: Halt on PMU overflow control Mask */ + +#define DCB_DHCSR_C_SNAPSTALL_Pos 5U /*!< DCB DHCSR: Snap stall control Position */ +#define DCB_DHCSR_C_SNAPSTALL_Msk (0x1UL << DCB_DHCSR_C_SNAPSTALL_Pos) /*!< DCB DHCSR: Snap stall control Mask */ + +#define DCB_DHCSR_C_MASKINTS_Pos 3U /*!< DCB DHCSR: Mask interrupts control Position */ +#define DCB_DHCSR_C_MASKINTS_Msk (0x1UL << DCB_DHCSR_C_MASKINTS_Pos) /*!< DCB DHCSR: Mask interrupts control Mask */ + +#define DCB_DHCSR_C_STEP_Pos 2U /*!< DCB DHCSR: Step control Position */ +#define DCB_DHCSR_C_STEP_Msk (0x1UL << DCB_DHCSR_C_STEP_Pos) /*!< DCB DHCSR: Step control Mask */ + +#define DCB_DHCSR_C_HALT_Pos 1U /*!< DCB DHCSR: Halt control Position */ +#define DCB_DHCSR_C_HALT_Msk (0x1UL << DCB_DHCSR_C_HALT_Pos) /*!< DCB DHCSR: Halt control Mask */ + +#define DCB_DHCSR_C_DEBUGEN_Pos 0U /*!< DCB DHCSR: Debug enable control Position */ +#define DCB_DHCSR_C_DEBUGEN_Msk (0x1UL /*<< DCB_DHCSR_C_DEBUGEN_Pos*/) /*!< DCB DHCSR: Debug enable control Mask */ + +/* DCRSR, Debug Core Register Select Register Definitions */ +#define DCB_DCRSR_REGWnR_Pos 16U /*!< DCB DCRSR: Register write/not-read Position */ +#define DCB_DCRSR_REGWnR_Msk (0x1UL << DCB_DCRSR_REGWnR_Pos) /*!< DCB DCRSR: Register write/not-read Mask */ + +#define DCB_DCRSR_REGSEL_Pos 0U /*!< DCB DCRSR: Register selector Position */ +#define DCB_DCRSR_REGSEL_Msk (0x7FUL /*<< DCB_DCRSR_REGSEL_Pos*/) /*!< DCB DCRSR: Register selector Mask */ + +/* DCRDR, Debug Core Register Data Register Definitions */ +#define DCB_DCRDR_DBGTMP_Pos 0U /*!< DCB DCRDR: Data temporary buffer Position */ +#define DCB_DCRDR_DBGTMP_Msk (0xFFFFFFFFUL /*<< DCB_DCRDR_DBGTMP_Pos*/) /*!< DCB DCRDR: Data temporary buffer Mask */ + +/* DEMCR, Debug Exception and Monitor Control Register Definitions */ +#define DCB_DEMCR_TRCENA_Pos 24U /*!< DCB DEMCR: Trace enable Position */ +#define DCB_DEMCR_TRCENA_Msk (0x1UL << DCB_DEMCR_TRCENA_Pos) /*!< DCB DEMCR: Trace enable Mask */ + +#define DCB_DEMCR_MONPRKEY_Pos 23U /*!< DCB DEMCR: Monitor pend req key Position */ +#define DCB_DEMCR_MONPRKEY_Msk (0x1UL << DCB_DEMCR_MONPRKEY_Pos) /*!< DCB DEMCR: Monitor pend req key Mask */ + +#define DCB_DEMCR_UMON_EN_Pos 21U /*!< DCB DEMCR: Unprivileged monitor enable Position */ +#define DCB_DEMCR_UMON_EN_Msk (0x1UL << DCB_DEMCR_UMON_EN_Pos) /*!< DCB DEMCR: Unprivileged monitor enable Mask */ + +#define DCB_DEMCR_SDME_Pos 20U /*!< DCB DEMCR: Secure DebugMonitor enable Position */ +#define DCB_DEMCR_SDME_Msk (0x1UL << DCB_DEMCR_SDME_Pos) /*!< DCB DEMCR: Secure DebugMonitor enable Mask */ + +#define DCB_DEMCR_MON_REQ_Pos 19U /*!< DCB DEMCR: Monitor request Position */ +#define DCB_DEMCR_MON_REQ_Msk (0x1UL << DCB_DEMCR_MON_REQ_Pos) /*!< DCB DEMCR: Monitor request Mask */ + +#define DCB_DEMCR_MON_STEP_Pos 18U /*!< DCB DEMCR: Monitor step Position */ +#define DCB_DEMCR_MON_STEP_Msk (0x1UL << DCB_DEMCR_MON_STEP_Pos) /*!< DCB DEMCR: Monitor step Mask */ + +#define DCB_DEMCR_MON_PEND_Pos 17U /*!< DCB DEMCR: Monitor pend Position */ +#define DCB_DEMCR_MON_PEND_Msk (0x1UL << DCB_DEMCR_MON_PEND_Pos) /*!< DCB DEMCR: Monitor pend Mask */ + +#define DCB_DEMCR_MON_EN_Pos 16U /*!< DCB DEMCR: Monitor enable Position */ +#define DCB_DEMCR_MON_EN_Msk (0x1UL << DCB_DEMCR_MON_EN_Pos) /*!< DCB DEMCR: Monitor enable Mask */ + +#define DCB_DEMCR_VC_SFERR_Pos 11U /*!< DCB DEMCR: Vector Catch SecureFault Position */ +#define DCB_DEMCR_VC_SFERR_Msk (0x1UL << DCB_DEMCR_VC_SFERR_Pos) /*!< DCB DEMCR: Vector Catch SecureFault Mask */ + +#define DCB_DEMCR_VC_HARDERR_Pos 10U /*!< DCB DEMCR: Vector Catch HardFault errors Position */ +#define DCB_DEMCR_VC_HARDERR_Msk (0x1UL << DCB_DEMCR_VC_HARDERR_Pos) /*!< DCB DEMCR: Vector Catch HardFault errors Mask */ + +#define DCB_DEMCR_VC_INTERR_Pos 9U /*!< DCB DEMCR: Vector Catch interrupt errors Position */ +#define DCB_DEMCR_VC_INTERR_Msk (0x1UL << DCB_DEMCR_VC_INTERR_Pos) /*!< DCB DEMCR: Vector Catch interrupt errors Mask */ + +#define DCB_DEMCR_VC_BUSERR_Pos 8U /*!< DCB DEMCR: Vector Catch BusFault errors Position */ +#define DCB_DEMCR_VC_BUSERR_Msk (0x1UL << DCB_DEMCR_VC_BUSERR_Pos) /*!< DCB DEMCR: Vector Catch BusFault errors Mask */ + +#define DCB_DEMCR_VC_STATERR_Pos 7U /*!< DCB DEMCR: Vector Catch state errors Position */ +#define DCB_DEMCR_VC_STATERR_Msk (0x1UL << DCB_DEMCR_VC_STATERR_Pos) /*!< DCB DEMCR: Vector Catch state errors Mask */ + +#define DCB_DEMCR_VC_CHKERR_Pos 6U /*!< DCB DEMCR: Vector Catch check errors Position */ +#define DCB_DEMCR_VC_CHKERR_Msk (0x1UL << DCB_DEMCR_VC_CHKERR_Pos) /*!< DCB DEMCR: Vector Catch check errors Mask */ + +#define DCB_DEMCR_VC_NOCPERR_Pos 5U /*!< DCB DEMCR: Vector Catch NOCP errors Position */ +#define DCB_DEMCR_VC_NOCPERR_Msk (0x1UL << DCB_DEMCR_VC_NOCPERR_Pos) /*!< DCB DEMCR: Vector Catch NOCP errors Mask */ + +#define DCB_DEMCR_VC_MMERR_Pos 4U /*!< DCB DEMCR: Vector Catch MemManage errors Position */ +#define DCB_DEMCR_VC_MMERR_Msk (0x1UL << DCB_DEMCR_VC_MMERR_Pos) /*!< DCB DEMCR: Vector Catch MemManage errors Mask */ + +#define DCB_DEMCR_VC_CORERESET_Pos 0U /*!< DCB DEMCR: Vector Catch Core reset Position */ +#define DCB_DEMCR_VC_CORERESET_Msk (0x1UL /*<< DCB_DEMCR_VC_CORERESET_Pos*/) /*!< DCB DEMCR: Vector Catch Core reset Mask */ + +/* DSCEMCR, Debug Set Clear Exception and Monitor Control Register Definitions */ +#define DCB_DSCEMCR_CLR_MON_REQ_Pos 19U /*!< DCB DSCEMCR: Clear monitor request Position */ +#define DCB_DSCEMCR_CLR_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_REQ_Pos) /*!< DCB DSCEMCR: Clear monitor request Mask */ + +#define DCB_DSCEMCR_CLR_MON_PEND_Pos 17U /*!< DCB DSCEMCR: Clear monitor pend Position */ +#define DCB_DSCEMCR_CLR_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_CLR_MON_PEND_Pos) /*!< DCB DSCEMCR: Clear monitor pend Mask */ + +#define DCB_DSCEMCR_SET_MON_REQ_Pos 3U /*!< DCB DSCEMCR: Set monitor request Position */ +#define DCB_DSCEMCR_SET_MON_REQ_Msk (0x1UL << DCB_DSCEMCR_SET_MON_REQ_Pos) /*!< DCB DSCEMCR: Set monitor request Mask */ + +#define DCB_DSCEMCR_SET_MON_PEND_Pos 1U /*!< DCB DSCEMCR: Set monitor pend Position */ +#define DCB_DSCEMCR_SET_MON_PEND_Msk (0x1UL << DCB_DSCEMCR_SET_MON_PEND_Pos) /*!< DCB DSCEMCR: Set monitor pend Mask */ + +/* DAUTHCTRL, Debug Authentication Control Register Definitions */ +#define DCB_DAUTHCTRL_UIDEN_Pos 10U /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Position */ +#define DCB_DAUTHCTRL_UIDEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive Debug Enable Mask */ + +#define DCB_DAUTHCTRL_UIDAPEN_Pos 9U /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Position */ +#define DCB_DAUTHCTRL_UIDAPEN_Msk (0x1UL << DCB_DAUTHCTRL_UIDAPEN_Pos) /*!< DCB DAUTHCTRL: Unprivileged Invasive DAP Access Enable Mask */ + +#define DCB_DAUTHCTRL_FSDMA_Pos 8U /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Position */ +#define DCB_DAUTHCTRL_FSDMA_Msk (0x1UL << DCB_DAUTHCTRL_FSDMA_Pos) /*!< DCB DAUTHCTRL: Force Secure DebugMonitor Allowed Mask */ + +#define DCB_DAUTHCTRL_INTSPNIDEN_Pos 3U /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPNIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPNIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure non-invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPNIDENSEL_Pos 2U /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPNIDENSEL_Msk (0x1UL << DCB_DAUTHCTRL_SPNIDENSEL_Pos) /*!< DCB DAUTHCTRL: Secure non-invasive debug enable select Mask */ + +#define DCB_DAUTHCTRL_INTSPIDEN_Pos 1U /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Position */ +#define DCB_DAUTHCTRL_INTSPIDEN_Msk (0x1UL << DCB_DAUTHCTRL_INTSPIDEN_Pos) /*!< DCB DAUTHCTRL: Internal Secure invasive debug enable Mask */ + +#define DCB_DAUTHCTRL_SPIDENSEL_Pos 0U /*!< DCB DAUTHCTRL: Secure invasive debug enable select Position */ +#define DCB_DAUTHCTRL_SPIDENSEL_Msk (0x1UL /*<< DCB_DAUTHCTRL_SPIDENSEL_Pos*/) /*!< DCB DAUTHCTRL: Secure invasive debug enable select Mask */ + +/* DSCSR, Debug Security Control and Status Register Definitions */ +#define DCB_DSCSR_CDSKEY_Pos 17U /*!< DCB DSCSR: CDS write-enable key Position */ +#define DCB_DSCSR_CDSKEY_Msk (0x1UL << DCB_DSCSR_CDSKEY_Pos) /*!< DCB DSCSR: CDS write-enable key Mask */ + +#define DCB_DSCSR_CDS_Pos 16U /*!< DCB DSCSR: Current domain Secure Position */ +#define DCB_DSCSR_CDS_Msk (0x1UL << DCB_DSCSR_CDS_Pos) /*!< DCB DSCSR: Current domain Secure Mask */ + +#define DCB_DSCSR_SBRSEL_Pos 1U /*!< DCB DSCSR: Secure banked register select Position */ +#define DCB_DSCSR_SBRSEL_Msk (0x1UL << DCB_DSCSR_SBRSEL_Pos) /*!< DCB DSCSR: Secure banked register select Mask */ + +#define DCB_DSCSR_SBRSELEN_Pos 0U /*!< DCB DSCSR: Secure banked register select enable Position */ +#define DCB_DSCSR_SBRSELEN_Msk (0x1UL /*<< DCB_DSCSR_SBRSELEN_Pos*/) /*!< DCB DSCSR: Secure banked register select enable Mask */ + +/*@} end of group CMSIS_DCB */ + + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DIB Debug Identification Block + \brief Type definitions for the Debug Identification Block Registers + @{ + */ + +/** + \brief Structure type to access the Debug Identification Block Registers (DIB). + */ +typedef struct +{ + __OM uint32_t DLAR; /*!< Offset: 0x000 ( /W) SCS Software Lock Access Register */ + __IM uint32_t DLSR; /*!< Offset: 0x004 (R/ ) SCS Software Lock Status Register */ + __IM uint32_t DAUTHSTATUS; /*!< Offset: 0x008 (R/ ) Debug Authentication Status Register */ + __IM uint32_t DDEVARCH; /*!< Offset: 0x00C (R/ ) SCS Device Architecture Register */ + __IM uint32_t DDEVTYPE; /*!< Offset: 0x010 (R/ ) SCS Device Type Register */ +} DIB_Type; + +/* DLAR, SCS Software Lock Access Register Definitions */ +#define DIB_DLAR_KEY_Pos 0U /*!< DIB DLAR: KEY Position */ +#define DIB_DLAR_KEY_Msk (0xFFFFFFFFUL /*<< DIB_DLAR_KEY_Pos */) /*!< DIB DLAR: KEY Mask */ + +/* DLSR, SCS Software Lock Status Register Definitions */ +#define DIB_DLSR_nTT_Pos 2U /*!< DIB DLSR: Not thirty-two bit Position */ +#define DIB_DLSR_nTT_Msk (0x1UL << DIB_DLSR_nTT_Pos ) /*!< DIB DLSR: Not thirty-two bit Mask */ + +#define DIB_DLSR_SLK_Pos 1U /*!< DIB DLSR: Software Lock status Position */ +#define DIB_DLSR_SLK_Msk (0x1UL << DIB_DLSR_SLK_Pos ) /*!< DIB DLSR: Software Lock status Mask */ + +#define DIB_DLSR_SLI_Pos 0U /*!< DIB DLSR: Software Lock implemented Position */ +#define DIB_DLSR_SLI_Msk (0x1UL /*<< DIB_DLSR_SLI_Pos*/) /*!< DIB DLSR: Software Lock implemented Mask */ + +/* DAUTHSTATUS, Debug Authentication Status Register Definitions */ +#define DIB_DAUTHSTATUS_SUNID_Pos 22U /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUNID_Msk (0x3UL << DIB_DAUTHSTATUS_SUNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Non-invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SUID_Pos 20U /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_SUID_Msk (0x3UL << DIB_DAUTHSTATUS_SUID_Pos ) /*!< DIB DAUTHSTATUS: Secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_NSUNID_Pos 18U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Position */ +#define DIB_DAUTHSTATUS_NSUNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Non-invasive Debug Allo Mask */ + +#define DIB_DAUTHSTATUS_NSUID_Pos 16U /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Position */ +#define DIB_DAUTHSTATUS_NSUID_Msk (0x3UL << DIB_DAUTHSTATUS_NSUID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Unprivileged Invasive Debug Allowed Mask */ + +#define DIB_DAUTHSTATUS_SNID_Pos 6U /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_SNID_Msk (0x3UL << DIB_DAUTHSTATUS_SNID_Pos ) /*!< DIB DAUTHSTATUS: Secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_SID_Pos 4U /*!< DIB DAUTHSTATUS: Secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_SID_Msk (0x3UL << DIB_DAUTHSTATUS_SID_Pos ) /*!< DIB DAUTHSTATUS: Secure Invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSNID_Pos 2U /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSNID_Msk (0x3UL << DIB_DAUTHSTATUS_NSNID_Pos ) /*!< DIB DAUTHSTATUS: Non-secure Non-invasive Debug Mask */ + +#define DIB_DAUTHSTATUS_NSID_Pos 0U /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Position */ +#define DIB_DAUTHSTATUS_NSID_Msk (0x3UL /*<< DIB_DAUTHSTATUS_NSID_Pos*/) /*!< DIB DAUTHSTATUS: Non-secure Invasive Debug Mask */ + +/* DDEVARCH, SCS Device Architecture Register Definitions */ +#define DIB_DDEVARCH_ARCHITECT_Pos 21U /*!< DIB DDEVARCH: Architect Position */ +#define DIB_DDEVARCH_ARCHITECT_Msk (0x7FFUL << DIB_DDEVARCH_ARCHITECT_Pos ) /*!< DIB DDEVARCH: Architect Mask */ + +#define DIB_DDEVARCH_PRESENT_Pos 20U /*!< DIB DDEVARCH: DEVARCH Present Position */ +#define DIB_DDEVARCH_PRESENT_Msk (0x1FUL << DIB_DDEVARCH_PRESENT_Pos ) /*!< DIB DDEVARCH: DEVARCH Present Mask */ + +#define DIB_DDEVARCH_REVISION_Pos 16U /*!< DIB DDEVARCH: Revision Position */ +#define DIB_DDEVARCH_REVISION_Msk (0xFUL << DIB_DDEVARCH_REVISION_Pos ) /*!< DIB DDEVARCH: Revision Mask */ + +#define DIB_DDEVARCH_ARCHVER_Pos 12U /*!< DIB DDEVARCH: Architecture Version Position */ +#define DIB_DDEVARCH_ARCHVER_Msk (0xFUL << DIB_DDEVARCH_ARCHVER_Pos ) /*!< DIB DDEVARCH: Architecture Version Mask */ + +#define DIB_DDEVARCH_ARCHPART_Pos 0U /*!< DIB DDEVARCH: Architecture Part Position */ +#define DIB_DDEVARCH_ARCHPART_Msk (0xFFFUL /*<< DIB_DDEVARCH_ARCHPART_Pos*/) /*!< DIB DDEVARCH: Architecture Part Mask */ + +/* DDEVTYPE, SCS Device Type Register Definitions */ +#define DIB_DDEVTYPE_SUB_Pos 4U /*!< DIB DDEVTYPE: Sub-type Position */ +#define DIB_DDEVTYPE_SUB_Msk (0xFUL << DIB_DDEVTYPE_SUB_Pos ) /*!< DIB DDEVTYPE: Sub-type Mask */ + +#define DIB_DDEVTYPE_MAJOR_Pos 0U /*!< DIB DDEVTYPE: Major type Position */ +#define DIB_DDEVTYPE_MAJOR_Msk (0xFUL /*<< DIB_DDEVTYPE_MAJOR_Pos*/) /*!< DIB DDEVTYPE: Major type Mask */ + + +/*@} end of group CMSIS_DIB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ + #define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ + #define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ + #define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ + #define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ + #define CoreDebug_BASE (0xE000EDF0UL) /*!< \deprecated Core Debug Base Address */ + #define DCB_BASE (0xE000EDF0UL) /*!< DCB Base Address */ + #define DIB_BASE (0xE000EFB0UL) /*!< DIB Base Address */ + #define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ + #define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ + #define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + + #define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ + #define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ + #define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ + #define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + #define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ + #define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ + #define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ + #define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE ) /*!< \deprecated Core Debug configuration struct */ + #define DCB ((DCB_Type *) DCB_BASE ) /*!< DCB configuration struct */ + #define DIB ((DIB_Type *) DIB_BASE ) /*!< DIB configuration struct */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ + #endif + + #if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + #define PMU_BASE (0xE0003000UL) /*!< PMU Base Address */ + #define PMU ((PMU_Type *) PMU_BASE ) /*!< PMU configuration struct */ + #endif + + #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SAU_BASE (SCS_BASE + 0x0DD0UL) /*!< Security Attribution Unit */ + #define SAU ((SAU_Type *) SAU_BASE ) /*!< Security Attribution Unit */ + #endif + + #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ + #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + #define SCS_BASE_NS (0xE002E000UL) /*!< System Control Space Base Address (non-secure address space) */ + #define CoreDebug_BASE_NS (0xE002EDF0UL) /*!< \deprecated Core Debug Base Address (non-secure address space) */ + #define DCB_BASE_NS (0xE002EDF0UL) /*!< DCB Base Address (non-secure address space) */ + #define DIB_BASE_NS (0xE002EFB0UL) /*!< DIB Base Address (non-secure address space) */ + #define SysTick_BASE_NS (SCS_BASE_NS + 0x0010UL) /*!< SysTick Base Address (non-secure address space) */ + #define NVIC_BASE_NS (SCS_BASE_NS + 0x0100UL) /*!< NVIC Base Address (non-secure address space) */ + #define SCB_BASE_NS (SCS_BASE_NS + 0x0D00UL) /*!< System Control Block Base Address (non-secure address space) */ + + #define SCnSCB_NS ((SCnSCB_Type *) SCS_BASE_NS ) /*!< System control Register not in SCB(non-secure address space) */ + #define SCB_NS ((SCB_Type *) SCB_BASE_NS ) /*!< SCB configuration struct (non-secure address space) */ + #define SysTick_NS ((SysTick_Type *) SysTick_BASE_NS ) /*!< SysTick configuration struct (non-secure address space) */ + #define NVIC_NS ((NVIC_Type *) NVIC_BASE_NS ) /*!< NVIC configuration struct (non-secure address space) */ + #define CoreDebug_NS ((CoreDebug_Type *) CoreDebug_BASE_NS) /*!< \deprecated Core Debug configuration struct (non-secure address space) */ + #define DCB_NS ((DCB_Type *) DCB_BASE_NS ) /*!< DCB configuration struct (non-secure address space) */ + #define DIB_NS ((DIB_Type *) DIB_BASE_NS ) /*!< DIB configuration struct (non-secure address space) */ + + #if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE_NS (SCS_BASE_NS + 0x0D90UL) /*!< Memory Protection Unit (non-secure address space) */ + #define MPU_NS ((MPU_Type *) MPU_BASE_NS ) /*!< Memory Protection Unit (non-secure address space) */ + #endif + + #define FPU_BASE_NS (SCS_BASE_NS + 0x0F30UL) /*!< Floating Point Unit (non-secure address space) */ + #define FPU_NS ((FPU_Type *) FPU_BASE_NS ) /*!< Floating Point Unit (non-secure address space) */ + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* Special LR values for Secure/Non-Secure call handling and exception handling */ + +/* Function Return Payload (from ARMv8-M Architecture Reference Manual) LR value on entry from Secure BLXNS */ +#define FNC_RETURN (0xFEFFFFFFUL) /* bit [0] ignored when processing a branch */ + +/* The following EXC_RETURN mask values are used to evaluate the LR on exception entry */ +#define EXC_RETURN_PREFIX (0xFF000000UL) /* bits [31:24] set to indicate an EXC_RETURN value */ +#define EXC_RETURN_S (0x00000040UL) /* bit [6] stack used to push registers: 0=Non-secure 1=Secure */ +#define EXC_RETURN_DCRS (0x00000020UL) /* bit [5] stacking rules for called registers: 0=skipped 1=saved */ +#define EXC_RETURN_FTYPE (0x00000010UL) /* bit [4] allocate stack for floating-point context: 0=done 1=skipped */ +#define EXC_RETURN_MODE (0x00000008UL) /* bit [3] processor mode for return: 0=Handler mode 1=Thread mode */ +#define EXC_RETURN_SPSEL (0x00000004UL) /* bit [2] stack pointer used to restore context: 0=MSP 1=PSP */ +#define EXC_RETURN_ES (0x00000001UL) /* bit [0] security state exception was taken to: 0=Non-secure 1=Secure */ + +/* Integrity Signature (from ARMv8-M Architecture Reference Manual) for exception context stacking */ +#if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) /* Value for processors with floating-point extension: */ +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125AUL) /* bit [0] SFTC must match LR bit[4] EXC_RETURN_FTYPE */ +#else +#define EXC_INTEGRITY_SIGNATURE (0xFEFA125BUL) /* Value for processors without floating-point extension */ +#endif + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Interrupt Target State + \details Reads the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + \return 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_GetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Target State + \details Sets the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_SetTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] |= ((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Clear Interrupt Target State + \details Clears the interrupt target field in the NVIC and returns the interrupt target bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 if interrupt is assigned to Secure + 1 if interrupt is assigned to Non Secure + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t NVIC_ClearTargetState(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] &= ~((uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL))); + return((uint32_t)(((NVIC->ITNS[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Priority Grouping (non-secure) + \details Sets the non-secure priority grouping field when in secure state using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void TZ_NVIC_SetPriorityGrouping_NS(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB_NS->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB_NS->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping (non-secure) + \details Reads the priority grouping field from the non-secure NVIC when in secure state. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriorityGrouping_NS(void) +{ + return ((uint32_t)((SCB_NS->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt (non-secure) + \details Enables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_EnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Interrupt Enable status (non-secure) + \details Returns a device specific interrupt enable status from the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetEnableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt (non-secure) + \details Disables a device specific interrupt in the non-secure NVIC interrupt controller when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_DisableIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Pending Interrupt (non-secure) + \details Reads the NVIC pending register in the non-secure NVIC when in secure state and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt (non-secure) + \details Sets the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_SetPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt (non-secure) + \details Clears the pending bit of a device specific interrupt in the non-secure NVIC pending register when in secure state. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void TZ_NVIC_ClearPendingIRQ_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt (non-secure) + \details Reads the active register in non-secure NVIC when in secure state and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetActive_NS(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC_NS->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority (non-secure) + \details Sets the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every non-secure processor exception. + */ +__STATIC_INLINE void TZ_NVIC_SetPriority_NS(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC_NS->IPR[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority (non-secure) + \details Reads the priority of a non-secure device specific interrupt or a non-secure processor exception when in secure state. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t TZ_NVIC_GetPriority_NS(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC_NS->IPR[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB_NS->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} +#endif /* defined (__ARM_FEATURE_CMSE) &&(__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_NVICFunctions */ + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv8.h" + +#endif + +/* ########################## PMU functions and events #################################### */ + +#if defined (__PMU_PRESENT) && (__PMU_PRESENT == 1U) + +#include "pmu_armv8.h" + +/** + \brief Cortex-M55 PMU events + \note Architectural PMU events can be found in pmu_armv8.h +*/ + +#define ARMCM55_PMU_ECC_ERR 0xC000 /*!< Any ECC error */ +#define ARMCM55_PMU_ECC_ERR_FATAL 0xC001 /*!< Any fatal ECC error */ +#define ARMCM55_PMU_ECC_ERR_DCACHE 0xC010 /*!< Any ECC error in the data cache */ +#define ARMCM55_PMU_ECC_ERR_ICACHE 0xC011 /*!< Any ECC error in the instruction cache */ +#define ARMCM55_PMU_ECC_ERR_FATAL_DCACHE 0xC012 /*!< Any fatal ECC error in the data cache */ +#define ARMCM55_PMU_ECC_ERR_FATAL_ICACHE 0xC013 /*!< Any fatal ECC error in the instruction cache*/ +#define ARMCM55_PMU_ECC_ERR_DTCM 0xC020 /*!< Any ECC error in the DTCM */ +#define ARMCM55_PMU_ECC_ERR_ITCM 0xC021 /*!< Any ECC error in the ITCM */ +#define ARMCM55_PMU_ECC_ERR_FATAL_DTCM 0xC022 /*!< Any fatal ECC error in the DTCM */ +#define ARMCM55_PMU_ECC_ERR_FATAL_ITCM 0xC023 /*!< Any fatal ECC error in the ITCM */ +#define ARMCM55_PMU_PF_LINEFILL 0xC100 /*!< A prefetcher starts a line-fill */ +#define ARMCM55_PMU_PF_CANCEL 0xC101 /*!< A prefetcher stops prefetching */ +#define ARMCM55_PMU_PF_DROP_LINEFILL 0xC102 /*!< A linefill triggered by a prefetcher has been dropped because of lack of buffering */ +#define ARMCM55_PMU_NWAMODE_ENTER 0xC200 /*!< No write-allocate mode entry */ +#define ARMCM55_PMU_NWAMODE 0xC201 /*!< Write-allocate store is not allocated into the data cache due to no-write-allocate mode */ +#define ARMCM55_PMU_SAHB_ACCESS 0xC300 /*!< Read or write access on the S-AHB interface to the TCM */ +#define ARMCM55_PMU_DOSTIMEOUT_DOUBLE 0xC400 /*!< Denial of Service timeout has fired twice and caused buffers to drain to allow forward progress */ +#define ARMCM55_PMU_DOSTIMEOUT_TRIPLE 0xC401 /*!< Denial of Service timeout has fired three times and blocked the LSU to force forward progress */ + +#endif + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = FPU->MVFR0; + if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_FPSP_Msk | FPU_MVFR0_FPDP_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + +/* ########################## MVE functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_MveFunctions MVE Functions + \brief Function that provides MVE type. + @{ + */ + +/** + \brief get MVE type + \details returns the MVE type + \returns + - \b 0: No Vector Extension (MVE) + - \b 1: Integer Vector Extension (MVE-I) + - \b 2: Floating-point Vector Extension (MVE-F) + */ +__STATIC_INLINE uint32_t SCB_GetMVEType(void) +{ + const uint32_t mvfr1 = FPU->MVFR1; + if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x2U << FPU_MVFR1_MVE_Pos)) + { + return 2U; + } + else if ((mvfr1 & FPU_MVFR1_MVE_Msk) == (0x1U << FPU_MVFR1_MVE_Pos)) + { + return 1U; + } + else + { + return 0U; + } +} + + +/*@} end of CMSIS_Core_MveFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ########################## SAU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SAUFunctions SAU Functions + \brief Functions that configure the SAU. + @{ + */ + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) + +/** + \brief Enable SAU + \details Enables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Enable(void) +{ + SAU->CTRL |= (SAU_CTRL_ENABLE_Msk); +} + + + +/** + \brief Disable SAU + \details Disables the Security Attribution Unit (SAU). + */ +__STATIC_INLINE void TZ_SAU_Disable(void) +{ + SAU->CTRL &= ~(SAU_CTRL_ENABLE_Msk); +} + +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_SAUFunctions */ + + + + +/* ################################## Debug Control function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DCBFunctions Debug Control Functions + \brief Functions that access the Debug Control Block. + @{ + */ + + +/** + \brief Set Debug Authentication Control Register + \details writes to Debug Authentication Control register. + \param [in] value value to be writen. + */ +__STATIC_INLINE void DCB_SetAuthCtrl(uint32_t value) +{ + __DSB(); + __ISB(); + DCB->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register + \details Reads Debug Authentication Control register. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t DCB_GetAuthCtrl(void) +{ + return (DCB->DAUTHCTRL); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Set Debug Authentication Control Register (non-secure) + \details writes to non-secure Debug Authentication Control register when in secure state. + \param [in] value value to be writen + */ +__STATIC_INLINE void TZ_DCB_SetAuthCtrl_NS(uint32_t value) +{ + __DSB(); + __ISB(); + DCB_NS->DAUTHCTRL = value; + __DSB(); + __ISB(); +} + + +/** + \brief Get Debug Authentication Control Register (non-secure) + \details Reads non-secure Debug Authentication Control register when in secure state. + \return Debug Authentication Control Register. + */ +__STATIC_INLINE uint32_t TZ_DCB_GetAuthCtrl_NS(void) +{ + return (DCB_NS->DAUTHCTRL); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## Debug Identification function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_DIBFunctions Debug Identification Functions + \brief Functions that access the Debug Identification Block. + @{ + */ + + +/** + \brief Get Debug Authentication Status Register + \details Reads Debug Authentication Status register. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t DIB_GetAuthStatus(void) +{ + return (DIB->DAUTHSTATUS); +} + + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief Get Debug Authentication Status Register (non-secure) + \details Reads non-secure Debug Authentication Status register when in secure state. + \return Debug Authentication Status Register. + */ +__STATIC_INLINE uint32_t TZ_DIB_GetAuthStatus_NS(void) +{ + return (DIB_NS->DAUTHSTATUS); +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +/*@} end of CMSIS_Core_DCBFunctions */ + + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) +/** + \brief System Tick Configuration (non-secure) + \details Initializes the non-secure System Timer and its interrupt when in secure state, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>TZ_SysTick_Config_NS</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + + */ +__STATIC_INLINE uint32_t TZ_SysTick_Config_NS(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick_NS->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + TZ_NVIC_SetPriority_NS (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick_NS->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick_NS->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} +#endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM55_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm7.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm7.h new file mode 100644 index 0000000000..ce79737ab8 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_cm7.h @@ -0,0 +1,2362 @@ +/**************************************************************************//** + * @file core_cm7.h + * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File + * @version V5.1.2 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_CM7_H_GENERIC +#define __CORE_CM7_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup Cortex_M7 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS CM7 definitions */ +#define __CM7_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __CM7_CMSIS_VERSION_SUB ( __CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ + __CM7_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_M (7U) /*!< Cortex-M Core */ + +/** __FPU_USED indicates whether an FPU is used or not. + For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. +*/ +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #if defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U) + #define __FPU_USED 1U + #else + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #define __FPU_USED 0U + #endif + #else + #define __FPU_USED 0U + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_CM7_H_DEPENDANT +#define __CORE_CM7_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __CM7_REV + #define __CM7_REV 0x0000U + #warning "__CM7_REV not defined in device header file; using default!" + #endif + + #ifndef __FPU_PRESENT + #define __FPU_PRESENT 0U + #warning "__FPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __ICACHE_PRESENT + #define __ICACHE_PRESENT 0U + #warning "__ICACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DCACHE_PRESENT + #define __DCACHE_PRESENT 0U + #warning "__DCACHE_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __DTCM_PRESENT + #define __DTCM_PRESENT 0U + #warning "__DTCM_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group Cortex_M7 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + - Core FPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + +#define APSR_GE_Pos 16U /*!< APSR: GE Position */ +#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ + uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ +#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ + uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ +#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ + +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[1U]; + __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ + __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ + __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ + __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED3[93U]; + __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ + uint32_t RESERVED4[15U]; + __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 2 */ + uint32_t RESERVED5[1U]; + __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ + uint32_t RESERVED6[1U]; + __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ + __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ + __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ + __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ + __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ + __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ + __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ + __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ + uint32_t RESERVED7[6U]; + __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ + __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ + __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ + __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ + __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ + uint32_t RESERVED8[1U]; + __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ +#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ + +#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ +#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ + +#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ +#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ + +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MLSPERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 5U) /*!< SCB CFSR (MMFSR): MLSPERR Position */ +#define SCB_CFSR_MLSPERR_Msk (1UL << SCB_CFSR_MLSPERR_Pos) /*!< SCB CFSR (MMFSR): MLSPERR Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_LSPERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 5U) /*!< SCB CFSR (BFSR): LSPERR Position */ +#define SCB_CFSR_LSPERR_Msk (1UL << SCB_CFSR_LSPERR_Pos) /*!< SCB CFSR (BFSR): LSPERR Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/* SCB Cache Level ID Register Definitions */ +#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ +#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ + +#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ +#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ + +/* SCB Cache Type Register Definitions */ +#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ +#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ + +#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ +#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ + +#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ +#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ + +#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ +#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ + +#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ +#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ + +/* SCB Cache Size ID Register Definitions */ +#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ +#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ + +#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ +#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ + +#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ +#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ + +#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ +#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ + +#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ +#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ + +#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ +#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ + +#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ +#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ + +/* SCB Cache Size Selection Register Definitions */ +#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ +#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ + +#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ +#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ + +/* SCB Software Triggered Interrupt Register Definitions */ +#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ +#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ + +/* SCB D-Cache Invalidate by Set-way Register Definitions */ +#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ +#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ + +#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ +#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ + +/* SCB D-Cache Clean by Set-way Register Definitions */ +#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ +#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ + +#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ +#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ + +/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ +#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ +#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ + +#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ +#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ + +/* Instruction Tightly-Coupled Memory Control Register Definitions */ +#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ +#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ + +#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ +#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ + +#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ +#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ + +#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ +#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ + +/* Data Tightly-Coupled Memory Control Register Definitions */ +#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ +#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ + +#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ +#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ + +#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ +#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ + +#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ +#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ + +/* AHBP Control Register Definitions */ +#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ +#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ + +#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ +#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ + +/* L1 Cache Control Register Definitions */ +#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ +#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ + +#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ +#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ + +#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ +#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ + +/* AHBS Control Register Definitions */ +#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ +#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ + +#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ +#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ + +#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ +#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ + +/* Auxiliary Bus Fault Status Register Definitions */ +#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ +#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ + +#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ +#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ + +#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ +#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ + +#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ +#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ + +#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ +#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ + +#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ +#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISDYNADD_Pos 26U /*!< ACTLR: DISDYNADD Position */ +#define SCnSCB_ACTLR_DISDYNADD_Msk (1UL << SCnSCB_ACTLR_DISDYNADD_Pos) /*!< ACTLR: DISDYNADD Mask */ + +#define SCnSCB_ACTLR_DISISSCH1_Pos 21U /*!< ACTLR: DISISSCH1 Position */ +#define SCnSCB_ACTLR_DISISSCH1_Msk (0x1FUL << SCnSCB_ACTLR_DISISSCH1_Pos) /*!< ACTLR: DISISSCH1 Mask */ + +#define SCnSCB_ACTLR_DISDI_Pos 16U /*!< ACTLR: DISDI Position */ +#define SCnSCB_ACTLR_DISDI_Msk (0x1FUL << SCnSCB_ACTLR_DISDI_Pos) /*!< ACTLR: DISDI Mask */ + +#define SCnSCB_ACTLR_DISCRITAXIRUR_Pos 15U /*!< ACTLR: DISCRITAXIRUR Position */ +#define SCnSCB_ACTLR_DISCRITAXIRUR_Msk (1UL << SCnSCB_ACTLR_DISCRITAXIRUR_Pos) /*!< ACTLR: DISCRITAXIRUR Mask */ + +#define SCnSCB_ACTLR_DISBTACALLOC_Pos 14U /*!< ACTLR: DISBTACALLOC Position */ +#define SCnSCB_ACTLR_DISBTACALLOC_Msk (1UL << SCnSCB_ACTLR_DISBTACALLOC_Pos) /*!< ACTLR: DISBTACALLOC Mask */ + +#define SCnSCB_ACTLR_DISBTACREAD_Pos 13U /*!< ACTLR: DISBTACREAD Position */ +#define SCnSCB_ACTLR_DISBTACREAD_Msk (1UL << SCnSCB_ACTLR_DISBTACREAD_Pos) /*!< ACTLR: DISBTACREAD Mask */ + +#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ +#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ + +#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ +#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ + +#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ +#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ + +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFFFFFFFFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ + uint32_t RESERVED3[981U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +#define MPU_TYPE_RALIASES 4U + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif /* defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_FPU Floating Point Unit (FPU) + \brief Type definitions for the Floating Point Unit (FPU) + @{ + */ + +/** + \brief Structure type to access the Floating Point Unit (FPU). + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ + __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ + __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ + __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ + __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ + __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ +} FPU_Type; + +/* Floating-Point Context Control Register Definitions */ +#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ +#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ + +#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ +#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ + +#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ +#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ + +#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ +#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ + +#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ +#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ + +#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ +#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ + +#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ +#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ + +#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ +#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ + +#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ +#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ + +/* Floating-Point Context Address Register Definitions */ +#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ +#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ + +/* Floating-Point Default Status Control Register Definitions */ +#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ +#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ + +#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ +#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ + +#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ +#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ + +#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ +#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ + +/* Media and FP Feature Register 0 Definitions */ +#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ +#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ + +#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ +#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ + +#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ +#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ + +#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ +#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ + +#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ +#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ + +#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ +#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ + +#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ +#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ + +#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ +#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ + +/* Media and FP Feature Register 1 Definitions */ +#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ +#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ + +#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ +#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ + +#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ +#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ + +#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ +#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ + +/* Media and FP Feature Register 2 Definitions */ + +#define FPU_MVFR2_VFP_Misc_Pos 4U /*!< MVFR2: VFP Misc bits Position */ +#define FPU_MVFR2_VFP_Misc_Msk (0xFUL << FPU_MVFR2_VFP_Misc_Pos) /*!< MVFR2: VFP Misc bits Mask */ + +/*@} end of group CMSIS_FPU */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +#define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ +#define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ +#define EXC_RETURN_HANDLER_FPU (0xFFFFFFE1UL) /* return to Handler mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_MSP_FPU (0xFFFFFFE9UL) /* return to Thread mode, uses MSP after return, restore floating-point state */ +#define EXC_RETURN_THREAD_PSP_FPU (0xFFFFFFEDUL) /* return to Thread mode, uses PSP after return, restore floating-point state */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHPR[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + __DSB(); +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## MPU functions #################################### */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + +#include "mpu_armv7.h" + +#endif + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + uint32_t mvfr0; + + mvfr0 = SCB->MVFR0; + if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x220U) + { + return 2U; /* Double + Single precision FPU */ + } + else if ((mvfr0 & (FPU_MVFR0_Single_precision_Msk | FPU_MVFR0_Double_precision_Msk)) == 0x020U) + { + return 1U; /* Single precision FPU */ + } + else + { + return 0U; /* No FPU */ + } +} + +/*@} end of CMSIS_Core_FpuFunctions */ + + +/* ########################## Cache functions #################################### */ + +#if ((defined (__ICACHE_PRESENT) && (__ICACHE_PRESENT == 1U)) || \ + (defined (__DCACHE_PRESENT) && (__DCACHE_PRESENT == 1U))) +#include "cachel1_armv7.h" +#endif + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_CM7_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_sc000.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_sc000.h new file mode 100644 index 0000000000..e252068ce6 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_sc000.h @@ -0,0 +1,1030 @@ +/**************************************************************************//** + * @file core_sc000.h + * @brief CMSIS SC000 Core Peripheral Access Layer Header File + * @version V5.0.7 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC000_H_GENERIC +#define __CORE_SC000_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC000 definitions */ +#define __SC000_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC000_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ + __SC000_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (000U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC000_H_DEPENDANT +#define __CORE_SC000_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC000_REV + #define __SC000_REV 0x0000U + #warning "__SC000_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 0U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 2U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC000 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ + uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t _reserved0:1; /*!< bit: 0 Reserved */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[31U]; + __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RSERVED1[31U]; + __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[31U]; + __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[31U]; + uint32_t RESERVED4[64U]; + __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ +} NVIC_Type; + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + uint32_t RESERVED0[1U]; + __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + uint32_t RESERVED1[154U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. + Therefore they are not covered by the SC000 header file. + @{ + */ +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else +/*#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping not available for SC000 */ +/*#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping not available for SC000 */ + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ +/*#define NVIC_GetActive __NVIC_GetActive not available for SC000 */ + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/* Interrupt Priorities are WORD accessible only under Armv6-M */ +/* The following MACROS handle generation of the register offset and byte masks */ +#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) +#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) +#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } + else + { + SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | + (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M0 and M0+ do not require the architectural barrier - assume SC000 is the same */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + SCB_AIRCR_SYSRESETREQ_Msk); + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC000_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_sc300.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_sc300.h new file mode 100644 index 0000000000..e8914ba601 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/core_sc300.h @@ -0,0 +1,1917 @@ +/**************************************************************************//** + * @file core_sc300.h + * @brief CMSIS SC300 Core Peripheral Access Layer Header File + * @version V5.0.9 + * @date 27. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2009-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef __CORE_SC300_H_GENERIC +#define __CORE_SC300_H_GENERIC + +#include <stdint.h> + +#ifdef __cplusplus + extern "C" { +#endif + +/** + \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions + CMSIS violates the following MISRA-C:2004 rules: + + \li Required Rule 8.5, object/function definition in header file.<br> + Function definitions in header files are used to allow 'inlining'. + + \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> + Unions are used for effective representation of core registers. + + \li Advisory Rule 19.7, Function-like macro defined.<br> + Function-like macros are used to allow more efficient code. + */ + + +/******************************************************************************* + * CMSIS definitions + ******************************************************************************/ +/** + \ingroup SC3000 + @{ + */ + +#include "cmsis_version.h" + +/* CMSIS SC300 definitions */ +#define __SC300_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */ +#define __SC300_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */ +#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ + __SC300_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */ + +#define __CORTEX_SC (300U) /*!< Cortex secure core */ + +/** __FPU_USED indicates whether an FPU is used or not. + This core does not support an FPU at all +*/ +#define __FPU_USED 0U + +#if defined ( __CC_ARM ) + #if defined __TARGET_FPU_VFP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + #if defined __ARM_FP + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __GNUC__ ) + #if defined (__VFP_FP__) && !defined(__SOFTFP__) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __ICCARM__ ) + #if defined __ARMVFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TI_ARM__ ) + #if defined __TI_VFP_SUPPORT__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __TASKING__ ) + #if defined __FPU_VFP__ + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#elif defined ( __CSMC__ ) + #if ( __CSMC__ & 0x400U) + #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" + #endif + +#endif + +#include "cmsis_compiler.h" /* CMSIS compiler specific defines */ + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_GENERIC */ + +#ifndef __CMSIS_GENERIC + +#ifndef __CORE_SC300_H_DEPENDANT +#define __CORE_SC300_H_DEPENDANT + +#ifdef __cplusplus + extern "C" { +#endif + +/* check device defines and use defaults */ +#if defined __CHECK_DEVICE_DEFINES + #ifndef __SC300_REV + #define __SC300_REV 0x0000U + #warning "__SC300_REV not defined in device header file; using default!" + #endif + + #ifndef __MPU_PRESENT + #define __MPU_PRESENT 0U + #warning "__MPU_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __VTOR_PRESENT + #define __VTOR_PRESENT 1U + #warning "__VTOR_PRESENT not defined in device header file; using default!" + #endif + + #ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 3U + #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" + #endif + + #ifndef __Vendor_SysTickConfig + #define __Vendor_SysTickConfig 0U + #warning "__Vendor_SysTickConfig not defined in device header file; using default!" + #endif +#endif + +/* IO definitions (access restrictions to peripheral registers) */ +/** + \defgroup CMSIS_glob_defs CMSIS Global Defines + + <strong>IO Type Qualifiers</strong> are used + \li to specify the access to peripheral variables. + \li for automatic generation of peripheral register debug information. +*/ +#ifdef __cplusplus + #define __I volatile /*!< Defines 'read only' permissions */ +#else + #define __I volatile const /*!< Defines 'read only' permissions */ +#endif +#define __O volatile /*!< Defines 'write only' permissions */ +#define __IO volatile /*!< Defines 'read / write' permissions */ + +/* following defines should be used for structure members */ +#define __IM volatile const /*! Defines 'read only' structure member permissions */ +#define __OM volatile /*! Defines 'write only' structure member permissions */ +#define __IOM volatile /*! Defines 'read / write' structure member permissions */ + +/*@} end of group SC300 */ + + + +/******************************************************************************* + * Register Abstraction + Core Register contain: + - Core Register + - Core NVIC Register + - Core SCB Register + - Core SysTick Register + - Core Debug Register + - Core MPU Register + ******************************************************************************/ +/** + \defgroup CMSIS_core_register Defines and Type Definitions + \brief Type definitions and defines for Cortex-M processor based devices. +*/ + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CORE Status and Control Registers + \brief Core Register type definitions. + @{ + */ + +/** + \brief Union type to access the Application Program Status Register (APSR). + */ +typedef union +{ + struct + { + uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} APSR_Type; + +/* APSR Register Definitions */ +#define APSR_N_Pos 31U /*!< APSR: N Position */ +#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ + +#define APSR_Z_Pos 30U /*!< APSR: Z Position */ +#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ + +#define APSR_C_Pos 29U /*!< APSR: C Position */ +#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ + +#define APSR_V_Pos 28U /*!< APSR: V Position */ +#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ + +#define APSR_Q_Pos 27U /*!< APSR: Q Position */ +#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ + + +/** + \brief Union type to access the Interrupt Program Status Register (IPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} IPSR_Type; + +/* IPSR Register Definitions */ +#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ +#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ + + +/** + \brief Union type to access the Special-Purpose Program Status Registers (xPSR). + */ +typedef union +{ + struct + { + uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ + uint32_t _reserved0:1; /*!< bit: 9 Reserved */ + uint32_t ICI_IT_1:6; /*!< bit: 10..15 ICI/IT part 1 */ + uint32_t _reserved1:8; /*!< bit: 16..23 Reserved */ + uint32_t T:1; /*!< bit: 24 Thumb bit */ + uint32_t ICI_IT_2:2; /*!< bit: 25..26 ICI/IT part 2 */ + uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ + uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ + uint32_t C:1; /*!< bit: 29 Carry condition code flag */ + uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ + uint32_t N:1; /*!< bit: 31 Negative condition code flag */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} xPSR_Type; + +/* xPSR Register Definitions */ +#define xPSR_N_Pos 31U /*!< xPSR: N Position */ +#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ + +#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ +#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ + +#define xPSR_C_Pos 29U /*!< xPSR: C Position */ +#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ + +#define xPSR_V_Pos 28U /*!< xPSR: V Position */ +#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ + +#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ +#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ + +#define xPSR_ICI_IT_2_Pos 25U /*!< xPSR: ICI/IT part 2 Position */ +#define xPSR_ICI_IT_2_Msk (3UL << xPSR_ICI_IT_2_Pos) /*!< xPSR: ICI/IT part 2 Mask */ + +#define xPSR_T_Pos 24U /*!< xPSR: T Position */ +#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ + +#define xPSR_ICI_IT_1_Pos 10U /*!< xPSR: ICI/IT part 1 Position */ +#define xPSR_ICI_IT_1_Msk (0x3FUL << xPSR_ICI_IT_1_Pos) /*!< xPSR: ICI/IT part 1 Mask */ + +#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ +#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ + + +/** + \brief Union type to access the Control Registers (CONTROL). + */ +typedef union +{ + struct + { + uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ + uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ + uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ + } b; /*!< Structure used for bit access */ + uint32_t w; /*!< Type used for word access */ +} CONTROL_Type; + +/* CONTROL Register Definitions */ +#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ +#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ + +#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ +#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ + +/*@} end of group CMSIS_CORE */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) + \brief Type definitions for the NVIC Registers + @{ + */ + +/** + \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). + */ +typedef struct +{ + __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ + uint32_t RESERVED0[24U]; + __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ + uint32_t RESERVED1[24U]; + __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ + uint32_t RESERVED2[24U]; + __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ + uint32_t RESERVED3[24U]; + __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ + uint32_t RESERVED4[56U]; + __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644U]; + __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ +} NVIC_Type; + +/* Software Triggered Interrupt Register Definitions */ +#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ +#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ + +/*@} end of group CMSIS_NVIC */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCB System Control Block (SCB) + \brief Type definitions for the System Control Block Registers + @{ + */ + +/** + \brief Structure type to access the System Control Block (SCB). + */ +typedef struct +{ + __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ + __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ + __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ + __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ + __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ + __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ + __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ + __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ + __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ + __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ + __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ + __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ + __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ + __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ + __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ + __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ + __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ + __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ + uint32_t RESERVED0[5U]; + __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ + uint32_t RESERVED1[129U]; + __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ +#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ + +#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Vector Table Offset Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Register Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* MemManage Fault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_MMARVALID_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 7U) /*!< SCB CFSR (MMFSR): MMARVALID Position */ +#define SCB_CFSR_MMARVALID_Msk (1UL << SCB_CFSR_MMARVALID_Pos) /*!< SCB CFSR (MMFSR): MMARVALID Mask */ + +#define SCB_CFSR_MSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 4U) /*!< SCB CFSR (MMFSR): MSTKERR Position */ +#define SCB_CFSR_MSTKERR_Msk (1UL << SCB_CFSR_MSTKERR_Pos) /*!< SCB CFSR (MMFSR): MSTKERR Mask */ + +#define SCB_CFSR_MUNSTKERR_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 3U) /*!< SCB CFSR (MMFSR): MUNSTKERR Position */ +#define SCB_CFSR_MUNSTKERR_Msk (1UL << SCB_CFSR_MUNSTKERR_Pos) /*!< SCB CFSR (MMFSR): MUNSTKERR Mask */ + +#define SCB_CFSR_DACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 1U) /*!< SCB CFSR (MMFSR): DACCVIOL Position */ +#define SCB_CFSR_DACCVIOL_Msk (1UL << SCB_CFSR_DACCVIOL_Pos) /*!< SCB CFSR (MMFSR): DACCVIOL Mask */ + +#define SCB_CFSR_IACCVIOL_Pos (SCB_SHCSR_MEMFAULTACT_Pos + 0U) /*!< SCB CFSR (MMFSR): IACCVIOL Position */ +#define SCB_CFSR_IACCVIOL_Msk (1UL /*<< SCB_CFSR_IACCVIOL_Pos*/) /*!< SCB CFSR (MMFSR): IACCVIOL Mask */ + +/* BusFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_BFARVALID_Pos (SCB_CFSR_BUSFAULTSR_Pos + 7U) /*!< SCB CFSR (BFSR): BFARVALID Position */ +#define SCB_CFSR_BFARVALID_Msk (1UL << SCB_CFSR_BFARVALID_Pos) /*!< SCB CFSR (BFSR): BFARVALID Mask */ + +#define SCB_CFSR_STKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 4U) /*!< SCB CFSR (BFSR): STKERR Position */ +#define SCB_CFSR_STKERR_Msk (1UL << SCB_CFSR_STKERR_Pos) /*!< SCB CFSR (BFSR): STKERR Mask */ + +#define SCB_CFSR_UNSTKERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 3U) /*!< SCB CFSR (BFSR): UNSTKERR Position */ +#define SCB_CFSR_UNSTKERR_Msk (1UL << SCB_CFSR_UNSTKERR_Pos) /*!< SCB CFSR (BFSR): UNSTKERR Mask */ + +#define SCB_CFSR_IMPRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 2U) /*!< SCB CFSR (BFSR): IMPRECISERR Position */ +#define SCB_CFSR_IMPRECISERR_Msk (1UL << SCB_CFSR_IMPRECISERR_Pos) /*!< SCB CFSR (BFSR): IMPRECISERR Mask */ + +#define SCB_CFSR_PRECISERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 1U) /*!< SCB CFSR (BFSR): PRECISERR Position */ +#define SCB_CFSR_PRECISERR_Msk (1UL << SCB_CFSR_PRECISERR_Pos) /*!< SCB CFSR (BFSR): PRECISERR Mask */ + +#define SCB_CFSR_IBUSERR_Pos (SCB_CFSR_BUSFAULTSR_Pos + 0U) /*!< SCB CFSR (BFSR): IBUSERR Position */ +#define SCB_CFSR_IBUSERR_Msk (1UL << SCB_CFSR_IBUSERR_Pos) /*!< SCB CFSR (BFSR): IBUSERR Mask */ + +/* UsageFault Status Register (part of SCB Configurable Fault Status Register) */ +#define SCB_CFSR_DIVBYZERO_Pos (SCB_CFSR_USGFAULTSR_Pos + 9U) /*!< SCB CFSR (UFSR): DIVBYZERO Position */ +#define SCB_CFSR_DIVBYZERO_Msk (1UL << SCB_CFSR_DIVBYZERO_Pos) /*!< SCB CFSR (UFSR): DIVBYZERO Mask */ + +#define SCB_CFSR_UNALIGNED_Pos (SCB_CFSR_USGFAULTSR_Pos + 8U) /*!< SCB CFSR (UFSR): UNALIGNED Position */ +#define SCB_CFSR_UNALIGNED_Msk (1UL << SCB_CFSR_UNALIGNED_Pos) /*!< SCB CFSR (UFSR): UNALIGNED Mask */ + +#define SCB_CFSR_NOCP_Pos (SCB_CFSR_USGFAULTSR_Pos + 3U) /*!< SCB CFSR (UFSR): NOCP Position */ +#define SCB_CFSR_NOCP_Msk (1UL << SCB_CFSR_NOCP_Pos) /*!< SCB CFSR (UFSR): NOCP Mask */ + +#define SCB_CFSR_INVPC_Pos (SCB_CFSR_USGFAULTSR_Pos + 2U) /*!< SCB CFSR (UFSR): INVPC Position */ +#define SCB_CFSR_INVPC_Msk (1UL << SCB_CFSR_INVPC_Pos) /*!< SCB CFSR (UFSR): INVPC Mask */ + +#define SCB_CFSR_INVSTATE_Pos (SCB_CFSR_USGFAULTSR_Pos + 1U) /*!< SCB CFSR (UFSR): INVSTATE Position */ +#define SCB_CFSR_INVSTATE_Msk (1UL << SCB_CFSR_INVSTATE_Pos) /*!< SCB CFSR (UFSR): INVSTATE Mask */ + +#define SCB_CFSR_UNDEFINSTR_Pos (SCB_CFSR_USGFAULTSR_Pos + 0U) /*!< SCB CFSR (UFSR): UNDEFINSTR Position */ +#define SCB_CFSR_UNDEFINSTR_Msk (1UL << SCB_CFSR_UNDEFINSTR_Pos) /*!< SCB CFSR (UFSR): UNDEFINSTR Mask */ + +/* SCB Hard Fault Status Register Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ + +/*@} end of group CMSIS_SCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) + \brief Type definitions for the System Control and ID Register not in the SCB + @{ + */ + +/** + \brief Structure type to access the System Control and ID Register not in the SCB. + */ +typedef struct +{ + uint32_t RESERVED0[1U]; + __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ + __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ +} SCnSCB_Type; + +/* Interrupt Controller Type Register Definitions */ +#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ +#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ +#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ + +#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ +#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ + +#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ +#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ + +/*@} end of group CMSIS_SCnotSCB */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_SysTick System Tick Timer (SysTick) + \brief Type definitions for the System Timer Registers. + @{ + */ + +/** + \brief Structure type to access the System Timer (SysTick). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ + __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ + __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ + __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ + +/*@} end of group CMSIS_SysTick */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) + \brief Type definitions for the Instrumentation Trace Macrocell (ITM) + @{ + */ + +/** + \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). + */ +typedef struct +{ + __OM union + { + __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ + __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ + __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ + } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ + uint32_t RESERVED0[864U]; + __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ + uint32_t RESERVED1[15U]; + __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ + uint32_t RESERVED2[15U]; + __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ + uint32_t RESERVED3[32U]; + uint32_t RESERVED4[43U]; + __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ + __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ + uint32_t RESERVED5[6U]; + __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ + __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ + __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ + __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ + __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ + __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ + __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ + __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ + __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ + __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ + __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ + __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ +#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ + +#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ + +/*@}*/ /* end of group CMSIS_ITM */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) + \brief Type definitions for the Data Watchpoint and Trace (DWT) + @{ + */ + +/** + \brief Structure type to access the Data Watchpoint and Trace Register (DWT). + */ +typedef struct +{ + __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ + __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ + __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ + __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ + __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ + __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ + __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ + __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ + __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ + __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ + __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ + uint32_t RESERVED0[1U]; + __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ + __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ + __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ + uint32_t RESERVED1[1U]; + __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ + __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ + __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ + uint32_t RESERVED2[1U]; + __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ + __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ + __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ +} DWT_Type; + +/* DWT Control Register Definitions */ +#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ +#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ + +#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ +#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ + +#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ +#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ + +#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ +#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ + +#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ +#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ + +#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ +#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ + +#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ +#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ + +#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ +#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ + +#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ +#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ + +#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ +#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ + +#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ +#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ + +#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ +#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ + +#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ +#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ + +#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ +#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ + +#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ +#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ + +#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ +#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ + +#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ +#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ + +#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ +#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ + +/* DWT CPI Count Register Definitions */ +#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ +#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ + +/* DWT Exception Overhead Count Register Definitions */ +#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ +#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ + +/* DWT Sleep Count Register Definitions */ +#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ +#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ + +/* DWT LSU Count Register Definitions */ +#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ +#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ + +/* DWT Folded-instruction Count Register Definitions */ +#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ +#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ + +/* DWT Comparator Mask Register Definitions */ +#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ +#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ + +/* DWT Comparator Function Register Definitions */ +#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ +#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ + +#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ +#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ + +#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ +#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ + +#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ +#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ + +#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ +#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ + +#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ +#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ + +#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ +#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ + +#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ +#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ + +#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ +#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ + +/*@}*/ /* end of group CMSIS_DWT */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_TPI Trace Port Interface (TPI) + \brief Type definitions for the Trace Port Interface (TPI) + @{ + */ + +/** + \brief Structure type to access the Trace Port Interface Register (TPI). + */ +typedef struct +{ + __IM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ + __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ + uint32_t RESERVED0[2U]; + __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ + uint32_t RESERVED1[55U]; + __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ + uint32_t RESERVED2[131U]; + __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ + __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ + __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ + uint32_t RESERVED3[759U]; + __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER Register */ + __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ + __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ + uint32_t RESERVED4[1U]; + __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ + __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ + __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ + uint32_t RESERVED5[39U]; + __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ + __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ + uint32_t RESERVED7[8U]; + __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ + __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ +} TPI_Type; + +/* TPI Asynchronous Clock Prescaler Register Definitions */ +#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ +#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ + +/* TPI Selected Pin Protocol Register Definitions */ +#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ +#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ + +/* TPI Formatter and Flush Status Register Definitions */ +#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ +#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ + +#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ +#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ + +#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ +#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ + +#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ +#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ + +/* TPI Formatter and Flush Control Register Definitions */ +#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ +#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ + +#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ +#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ + +/* TPI TRIGGER Register Definitions */ +#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ +#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ + +/* TPI Integration ETM Data Register Definitions (FIFO0) */ +#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ +#define TPI_FIFO0_ITM_ATVALID_Msk (0x1UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ + +#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ +#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ + +#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ +#define TPI_FIFO0_ETM_ATVALID_Msk (0x1UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ + +#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ +#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ + +#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ +#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ + +#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ +#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ + +#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ +#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ + +/* TPI ITATBCTR2 Register Definitions */ +#define TPI_ITATBCTR2_ATREADY2_Pos 0U /*!< TPI ITATBCTR2: ATREADY2 Position */ +#define TPI_ITATBCTR2_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY2_Pos*/) /*!< TPI ITATBCTR2: ATREADY2 Mask */ + +#define TPI_ITATBCTR2_ATREADY1_Pos 0U /*!< TPI ITATBCTR2: ATREADY1 Position */ +#define TPI_ITATBCTR2_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY1_Pos*/) /*!< TPI ITATBCTR2: ATREADY1 Mask */ + +/* TPI Integration ITM Data Register Definitions (FIFO1) */ +#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ +#define TPI_FIFO1_ITM_ATVALID_Msk (0x1UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ + +#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ +#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ + +#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ +#define TPI_FIFO1_ETM_ATVALID_Msk (0x1UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ + +#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ +#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ + +#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ +#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ + +#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ +#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ + +#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ +#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ + +/* TPI ITATBCTR0 Register Definitions */ +#define TPI_ITATBCTR0_ATREADY2_Pos 0U /*!< TPI ITATBCTR0: ATREADY2 Position */ +#define TPI_ITATBCTR0_ATREADY2_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY2_Pos*/) /*!< TPI ITATBCTR0: ATREADY2 Mask */ + +#define TPI_ITATBCTR0_ATREADY1_Pos 0U /*!< TPI ITATBCTR0: ATREADY1 Position */ +#define TPI_ITATBCTR0_ATREADY1_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY1_Pos*/) /*!< TPI ITATBCTR0: ATREADY1 Mask */ + +/* TPI Integration Mode Control Register Definitions */ +#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ +#define TPI_ITCTRL_Mode_Msk (0x3UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ + +/* TPI DEVID Register Definitions */ +#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ +#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ + +#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ +#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ + +#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ +#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ + +#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ +#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ + +#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ +#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ + +#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ +#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ + +/* TPI DEVTYPE Register Definitions */ +#define TPI_DEVTYPE_SubType_Pos 4U /*!< TPI DEVTYPE: SubType Position */ +#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ + +#define TPI_DEVTYPE_MajorType_Pos 0U /*!< TPI DEVTYPE: MajorType Position */ +#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ + +/*@}*/ /* end of group CMSIS_TPI */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_MPU Memory Protection Unit (MPU) + \brief Type definitions for the Memory Protection Unit (MPU) + @{ + */ + +/** + \brief Structure type to access the Memory Protection Unit (MPU). + */ +typedef struct +{ + __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ + __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ + __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ + __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ + __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ + __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ + __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ + __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ + __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ + __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register Definitions */ +#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register Definitions */ +#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register Definitions */ +#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register Definitions */ +#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register Definitions */ +#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ +#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ + +#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ +#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ + +#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ +#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ + +#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ +#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ + +#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ +#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ + +#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ +#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ + +#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ +#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ + +#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@} end of group CMSIS_MPU */ +#endif + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) + \brief Type definitions for the Core Debug Registers + @{ + */ + +/** + \brief Structure type to access the Core Debug Register (CoreDebug). + */ +typedef struct +{ + __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ + __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ + __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ + __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register Definitions */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register Definitions */ +#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register Definitions */ +#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ + +/*@} end of group CMSIS_CoreDebug */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_bitfield Core register bit field macros + \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). + @{ + */ + +/** + \brief Mask and shift a bit field value for use in a register bit range. + \param[in] field Name of the register bit field. + \param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type. + \return Masked and shifted value. +*/ +#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk) + +/** + \brief Mask and shift a register value to extract a bit filed value. + \param[in] field Name of the register bit field. + \param[in] value Value of register. This parameter is interpreted as an uint32_t type. + \return Masked and shifted bit field value. +*/ +#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos) + +/*@} end of group CMSIS_core_bitfield */ + + +/** + \ingroup CMSIS_core_register + \defgroup CMSIS_core_base Core Definitions + \brief Definitions for base addresses, unions, and structures. + @{ + */ + +/* Memory mapping of Core Hardware */ +#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ +#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ +#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ +#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ + +#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ +#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ +#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ +#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1U) + #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ +#endif + +/*@} */ + + + +/******************************************************************************* + * Hardware Abstraction Layer + Core Function Interface contains: + - Core NVIC Functions + - Core SysTick Functions + - Core Debug Functions + - Core Register Access Functions + ******************************************************************************/ +/** + \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference +*/ + + + +/* ########################## NVIC functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_NVICFunctions NVIC Functions + \brief Functions that manage interrupts and exceptions via the NVIC. + @{ + */ + +#ifdef CMSIS_NVIC_VIRTUAL + #ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE + #define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h" + #endif + #include CMSIS_NVIC_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping + #define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping + #define NVIC_EnableIRQ __NVIC_EnableIRQ + #define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ + #define NVIC_DisableIRQ __NVIC_DisableIRQ + #define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ + #define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ + #define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ + #define NVIC_GetActive __NVIC_GetActive + #define NVIC_SetPriority __NVIC_SetPriority + #define NVIC_GetPriority __NVIC_GetPriority + #define NVIC_SystemReset __NVIC_SystemReset +#endif /* CMSIS_NVIC_VIRTUAL */ + +#ifdef CMSIS_VECTAB_VIRTUAL + #ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE + #define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h" + #endif + #include CMSIS_VECTAB_VIRTUAL_HEADER_FILE +#else + #define NVIC_SetVector __NVIC_SetVector + #define NVIC_GetVector __NVIC_GetVector +#endif /* (CMSIS_VECTAB_VIRTUAL) */ + +#define NVIC_USER_IRQ_OFFSET 16 + + +/* The following EXC_RETURN values are saved the LR on exception entry */ +#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */ +#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */ +#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */ + + +/** + \brief Set Priority Grouping + \details Sets the priority grouping field using the required unlock sequence. + The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. + Only values from 0..7 are used. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Priority grouping field. + */ +__STATIC_INLINE void __NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ + reg_value = (reg_value | + ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << SCB_AIRCR_PRIGROUP_Pos) ); /* Insert write key and priority group */ + SCB->AIRCR = reg_value; +} + + +/** + \brief Get Priority Grouping + \details Reads the priority grouping field from the NVIC Interrupt Controller. + \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). + */ +__STATIC_INLINE uint32_t __NVIC_GetPriorityGrouping(void) +{ + return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); +} + + +/** + \brief Enable Interrupt + \details Enables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + __COMPILER_BARRIER(); + NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __COMPILER_BARRIER(); + } +} + + +/** + \brief Get Interrupt Enable status + \details Returns a device specific interrupt enable status from the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt is not enabled. + \return 1 Interrupt is enabled. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISER[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Disable Interrupt + \details Disables a device specific interrupt in the NVIC interrupt controller. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICER[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + __DSB(); + __ISB(); + } +} + + +/** + \brief Get Pending Interrupt + \details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not pending. + \return 1 Interrupt status is pending. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Pending Interrupt + \details Sets the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ISPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Clear Pending Interrupt + \details Clears the pending bit of a device specific interrupt in the NVIC pending register. + \param [in] IRQn Device specific interrupt number. + \note IRQn must not be negative. + */ +__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->ICPR[(((uint32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL)); + } +} + + +/** + \brief Get Active Interrupt + \details Reads the active register in the NVIC and returns the active bit for the device specific interrupt. + \param [in] IRQn Device specific interrupt number. + \return 0 Interrupt status is not active. + \return 1 Interrupt status is active. + \note IRQn must not be negative. + */ +__STATIC_INLINE uint32_t __NVIC_GetActive(IRQn_Type IRQn) +{ + if ((int32_t)(IRQn) >= 0) + { + return((uint32_t)(((NVIC->IABR[(((uint32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); + } + else + { + return(0U); + } +} + + +/** + \brief Set Interrupt Priority + \details Sets the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \param [in] priority Priority to set. + \note The priority cannot be set for every processor exception. + */ +__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if ((int32_t)(IRQn) >= 0) + { + NVIC->IP[((uint32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } + else + { + SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); + } +} + + +/** + \brief Get Interrupt Priority + \details Reads the priority of a device specific interrupt or a processor exception. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Interrupt Priority. + Value is aligned automatically to the implemented priority bits of the microcontroller. + */ +__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn) +{ + + if ((int32_t)(IRQn) >= 0) + { + return(((uint32_t)NVIC->IP[((uint32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); + } + else + { + return(((uint32_t)SCB->SHP[(((uint32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); + } +} + + +/** + \brief Encode Priority + \details Encodes the priority for an interrupt with the given priority group, + preemptive priority value, and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. + \param [in] PriorityGroup Used priority group. + \param [in] PreemptPriority Preemptive priority value (starting from 0). + \param [in] SubPriority Subpriority value (starting from 0). + \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). + */ +__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + return ( + ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | + ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) + ); +} + + +/** + \brief Decode Priority + \details Decodes an interrupt priority value with a given priority group to + preemptive priority value and subpriority value. + In case of a conflict between priority grouping and available + priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). + \param [in] PriorityGroup Used priority group. + \param [out] pPreemptPriority Preemptive priority value (starting from 0). + \param [out] pSubPriority Subpriority value (starting from 0). + */ +__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); + SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); + + *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); + *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); +} + + +/** + \brief Set Interrupt Vector + \details Sets an interrupt vector in SRAM based interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + VTOR must been relocated to SRAM before. + \param [in] IRQn Interrupt number + \param [in] vector Address of interrupt handler function + */ +__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector; + /* ARM Application Note 321 states that the M3 does not require the architectural barrier */ +} + + +/** + \brief Get Interrupt Vector + \details Reads an interrupt vector from interrupt vector table. + The interrupt number can be positive to specify a device specific interrupt, + or negative to specify a processor exception. + \param [in] IRQn Interrupt number. + \return Address of interrupt handler function + */ +__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn) +{ + uint32_t *vectors = (uint32_t *)SCB->VTOR; + return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET]; +} + + +/** + \brief System Reset + \details Initiates a system reset request to reset the MCU. + */ +__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void) +{ + __DSB(); /* Ensure all outstanding memory accesses included + buffered write are completed before reset */ + SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + + for(;;) /* wait until reset */ + { + __NOP(); + } +} + +/*@} end of CMSIS_Core_NVICFunctions */ + + +/* ########################## FPU functions #################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_FpuFunctions FPU Functions + \brief Function that provides FPU type. + @{ + */ + +/** + \brief get FPU type + \details returns the FPU type + \returns + - \b 0: No FPU + - \b 1: Single precision FPU + - \b 2: Double + Single precision FPU + */ +__STATIC_INLINE uint32_t SCB_GetFPUType(void) +{ + return 0U; /* No FPU */ +} + + +/*@} end of CMSIS_Core_FpuFunctions */ + + + +/* ################################## SysTick function ############################################ */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_Core_SysTickFunctions SysTick Functions + \brief Functions that configure the System. + @{ + */ + +#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U) + +/** + \brief System Tick Configuration + \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. + Counter is in free running mode to generate periodic interrupts. + \param [in] ticks Number of ticks between two interrupts. + \return 0 Function succeeded. + \return 1 Function failed. + \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the + function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> + must contain a vendor-specific implementation of this function. + */ +__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) + { + return (1UL); /* Reload value impossible */ + } + + SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ + SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0UL); /* Function successful */ +} + +#endif + +/*@} end of CMSIS_Core_SysTickFunctions */ + + + +/* ##################################### Debug In/Output function ########################################### */ +/** + \ingroup CMSIS_Core_FunctionInterface + \defgroup CMSIS_core_DebugFunctions ITM Functions + \brief Functions that access the ITM debug interface. + @{ + */ + +extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ +#define ITM_RXBUFFER_EMPTY ((int32_t)0x5AA55AA5U) /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ + + +/** + \brief ITM Send Character + \details Transmits a character via the ITM channel 0, and + \li Just returns when no debugger is connected that has booked the output. + \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. + \param [in] ch Character to transmit. + \returns Character to transmit. + */ +__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ + ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0U].u32 == 0UL) + { + __NOP(); + } + ITM->PORT[0U].u8 = (uint8_t)ch; + } + return (ch); +} + + +/** + \brief ITM Receive Character + \details Inputs a character via the external variable \ref ITM_RxBuffer. + \return Received character. + \return -1 No character pending. + */ +__STATIC_INLINE int32_t ITM_ReceiveChar (void) +{ + int32_t ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) + { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + \brief ITM Check Character + \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. + \return 0 No character available. + \return 1 Character available. + */ +__STATIC_INLINE int32_t ITM_CheckChar (void) +{ + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) + { + return (0); /* no character available */ + } + else + { + return (1); /* character available */ + } +} + +/*@} end of CMSIS_core_DebugFunctions */ + + + + +#ifdef __cplusplus +} +#endif + +#endif /* __CORE_SC300_H_DEPENDANT */ + +#endif /* __CMSIS_GENERIC */ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/mpu_armv7.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/mpu_armv7.h new file mode 100644 index 0000000000..442fc21a3b --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/mpu_armv7.h @@ -0,0 +1,275 @@ +/****************************************************************************** + * @file mpu_armv7.h + * @brief CMSIS MPU API for Armv7-M MPU + * @version V5.1.1 + * @date 10. February 2020 + ******************************************************************************/ +/* + * Copyright (c) 2017-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV7_H +#define ARM_MPU_ARMV7_H + +#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes +#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes +#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes +#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes +#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes +#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte +#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes +#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes +#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes +#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes +#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes +#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes +#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes +#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes +#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes +#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte +#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes +#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes +#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes +#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes +#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes +#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes +#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes +#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes +#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes +#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte +#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes +#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes + +#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access +#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only +#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only +#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access +#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only +#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access + +/** MPU Region Base Address Register Value +* +* \param Region The region to be configured, number 0 to 15. +* \param BaseAddress The base address for the region. +*/ +#define ARM_MPU_RBAR(Region, BaseAddress) \ + (((BaseAddress) & MPU_RBAR_ADDR_Msk) | \ + ((Region) & MPU_RBAR_REGION_Msk) | \ + (MPU_RBAR_VALID_Msk)) + +/** +* MPU Memory Access Attributes +* +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +*/ +#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \ + ((((TypeExtField) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \ + (((IsShareable) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \ + (((IsCacheable) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \ + (((IsBufferable) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk)) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \ + ((((DisableExec) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \ + (((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \ + (((AccessAttributes) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk))) | \ + (((SubRegionDisable) << MPU_RASR_SRD_Pos) & MPU_RASR_SRD_Msk) | \ + (((Size) << MPU_RASR_SIZE_Pos) & MPU_RASR_SIZE_Msk) | \ + (((MPU_RASR_ENABLE_Msk)))) + +/** +* MPU Region Attribute and Size Register Value +* +* \param DisableExec Instruction access disable bit, 1= disable instruction fetches. +* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode. +* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral. +* \param IsShareable Region is shareable between multiple bus masters. +* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache. +* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy. +* \param SubRegionDisable Sub-region disable field. +* \param Size Region size of the region to be configured, for example 4K, 8K. +*/ +#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \ + ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size) + +/** +* MPU Memory Access Attribute for strongly ordered memory. +* - TEX: 000b +* - Shareable +* - Non-cacheable +* - Non-bufferable +*/ +#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U) + +/** +* MPU Memory Access Attribute for device memory. +* - TEX: 000b (if shareable) or 010b (if non-shareable) +* - Shareable or non-shareable +* - Non-cacheable +* - Bufferable (if shareable) or non-bufferable (if non-shareable) +* +* \param IsShareable Configures the device memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U)) + +/** +* MPU Memory Access Attribute for normal memory. +* - TEX: 1BBb (reflecting outer cacheability rules) +* - Shareable or non-shareable +* - Cacheable or non-cacheable (reflecting inner cacheability rules) +* - Bufferable or non-bufferable (reflecting inner cacheability rules) +* +* \param OuterCp Configures the outer cache policy. +* \param InnerCp Configures the inner cache policy. +* \param IsShareable Configures the memory as shareable or non-shareable. +*/ +#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) >> 1U), ((InnerCp) & 1U)) + +/** +* MPU Memory Access Attribute non-cacheable policy. +*/ +#define ARM_MPU_CACHEP_NOCACHE 0U + +/** +* MPU Memory Access Attribute write-back, write and read allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_WRA 1U + +/** +* MPU Memory Access Attribute write-through, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WT_NWA 2U + +/** +* MPU Memory Access Attribute write-back, no write allocate policy. +*/ +#define ARM_MPU_CACHEP_WB_NWA 3U + + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; //!< The region base address register value (RBAR) + uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + MPU->RNR = rnr; + MPU->RASR = 0U; +} + +/** Configure an MPU region. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr) +{ + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rsar Value for RSAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr) +{ + MPU->RNR = rnr; + MPU->RBAR = rbar; + MPU->RASR = rasr; +} + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + while (cnt > MPU_TYPE_RALIASES) { + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize); + table += MPU_TYPE_RALIASES; + cnt -= MPU_TYPE_RALIASES; + } + ARM_MPU_OrderedMemcpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize); +} + +#endif diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/mpu_armv8.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/mpu_armv8.h new file mode 100644 index 0000000000..3a197fbb49 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/mpu_armv8.h @@ -0,0 +1,352 @@ +/****************************************************************************** + * @file mpu_armv8.h + * @brief CMSIS MPU API for Armv8-M and Armv8.1-M MPU + * @version V5.1.2 + * @date 10. February 2020 + ******************************************************************************/ +/* + * Copyright (c) 2017-2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_MPU_ARMV8_H +#define ARM_MPU_ARMV8_H + +/** \brief Attribute for device memory (outer only) */ +#define ARM_MPU_ATTR_DEVICE ( 0U ) + +/** \brief Attribute for non-cacheable, normal memory */ +#define ARM_MPU_ATTR_NON_CACHEABLE ( 4U ) + +/** \brief Attribute for normal memory (outer and inner) +* \param NT Non-Transient: Set to 1 for non-transient data. +* \param WB Write-Back: Set to 1 to use write-back update policy. +* \param RA Read Allocation: Set to 1 to use cache allocation on read miss. +* \param WA Write Allocation: Set to 1 to use cache allocation on write miss. +*/ +#define ARM_MPU_ATTR_MEMORY_(NT, WB, RA, WA) \ + ((((NT) & 1U) << 3U) | (((WB) & 1U) << 2U) | (((RA) & 1U) << 1U) | ((WA) & 1U)) + +/** \brief Device memory type non Gathering, non Re-ordering, non Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRnE (0U) + +/** \brief Device memory type non Gathering, non Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGnRE (1U) + +/** \brief Device memory type non Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_nGRE (2U) + +/** \brief Device memory type Gathering, Re-ordering, Early Write Acknowledgement */ +#define ARM_MPU_ATTR_DEVICE_GRE (3U) + +/** \brief Memory Attribute +* \param O Outer memory attributes +* \param I O == ARM_MPU_ATTR_DEVICE: Device memory attributes, else: Inner memory attributes +*/ +#define ARM_MPU_ATTR(O, I) ((((O) & 0xFU) << 4U) | ((((O) & 0xFU) != 0U) ? ((I) & 0xFU) : (((I) & 0x3U) << 2U))) + +/** \brief Normal memory non-shareable */ +#define ARM_MPU_SH_NON (0U) + +/** \brief Normal memory outer shareable */ +#define ARM_MPU_SH_OUTER (2U) + +/** \brief Normal memory inner shareable */ +#define ARM_MPU_SH_INNER (3U) + +/** \brief Memory access permissions +* \param RO Read-Only: Set to 1 for read-only memory. +* \param NP Non-Privileged: Set to 1 for non-privileged memory. +*/ +#define ARM_MPU_AP_(RO, NP) ((((RO) & 1U) << 1U) | ((NP) & 1U)) + +/** \brief Region Base Address Register value +* \param BASE The base address bits [31:5] of a memory region. The value is zero extended. Effective address gets 32 byte aligned. +* \param SH Defines the Shareability domain for this memory region. +* \param RO Read-Only: Set to 1 for a read-only memory region. +* \param NP Non-Privileged: Set to 1 for a non-privileged memory region. +* \oaram XN eXecute Never: Set to 1 for a non-executable memory region. +*/ +#define ARM_MPU_RBAR(BASE, SH, RO, NP, XN) \ + (((BASE) & MPU_RBAR_BASE_Msk) | \ + (((SH) << MPU_RBAR_SH_Pos) & MPU_RBAR_SH_Msk) | \ + ((ARM_MPU_AP_(RO, NP) << MPU_RBAR_AP_Pos) & MPU_RBAR_AP_Msk) | \ + (((XN) << MPU_RBAR_XN_Pos) & MPU_RBAR_XN_Msk)) + +/** \brief Region Limit Address Register value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR(LIMIT, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#if defined(MPU_RLAR_PXN_Pos) + +/** \brief Region Limit Address Register with PXN value +* \param LIMIT The limit address bits [31:5] for this memory region. The value is one extended. +* \param PXN Privileged execute never. Defines whether code can be executed from this privileged region. +* \param IDX The attribute index to be associated with this memory region. +*/ +#define ARM_MPU_RLAR_PXN(LIMIT, PXN, IDX) \ + (((LIMIT) & MPU_RLAR_LIMIT_Msk) | \ + (((PXN) << MPU_RLAR_PXN_Pos) & MPU_RLAR_PXN_Msk) | \ + (((IDX) << MPU_RLAR_AttrIndx_Pos) & MPU_RLAR_AttrIndx_Msk) | \ + (MPU_RLAR_EN_Msk)) + +#endif + +/** +* Struct for a single MPU Region +*/ +typedef struct { + uint32_t RBAR; /*!< Region Base Address Register value */ + uint32_t RLAR; /*!< Region Limit Address Register value */ +} ARM_MPU_Region_t; + +/** Enable the MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control) +{ + __DMB(); + MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} + +#ifdef MPU_NS +/** Enable the Non-secure MPU. +* \param MPU_Control Default access permissions for unconfigured regions. +*/ +__STATIC_INLINE void ARM_MPU_Enable_NS(uint32_t MPU_Control) +{ + __DMB(); + MPU_NS->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; +#endif + __DSB(); + __ISB(); +} + +/** Disable the Non-secure MPU. +*/ +__STATIC_INLINE void ARM_MPU_Disable_NS(void) +{ + __DMB(); +#ifdef SCB_SHCSR_MEMFAULTENA_Msk + SCB_NS->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; +#endif + MPU_NS->CTRL &= ~MPU_CTRL_ENABLE_Msk; + __DSB(); + __ISB(); +} +#endif + +/** Set the memory attribute encoding to the given MPU. +* \param mpu Pointer to the MPU to be configured. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttrEx(MPU_Type* mpu, uint8_t idx, uint8_t attr) +{ + const uint8_t reg = idx / 4U; + const uint32_t pos = ((idx % 4U) * 8U); + const uint32_t mask = 0xFFU << pos; + + if (reg >= (sizeof(mpu->MAIR) / sizeof(mpu->MAIR[0]))) { + return; // invalid index + } + + mpu->MAIR[reg] = ((mpu->MAIR[reg] & ~mask) | ((attr << pos) & mask)); +} + +/** Set the memory attribute encoding. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU, idx, attr); +} + +#ifdef MPU_NS +/** Set the memory attribute encoding to the Non-secure MPU. +* \param idx The attribute index to be set [0-7] +* \param attr The attribute value to be set. +*/ +__STATIC_INLINE void ARM_MPU_SetMemAttr_NS(uint8_t idx, uint8_t attr) +{ + ARM_MPU_SetMemAttrEx(MPU_NS, idx, attr); +} +#endif + +/** Clear and disable the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegionEx(MPU_Type* mpu, uint32_t rnr) +{ + mpu->RNR = rnr; + mpu->RLAR = 0U; +} + +/** Clear and disable the given MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU, rnr); +} + +#ifdef MPU_NS +/** Clear and disable the given Non-secure MPU region. +* \param rnr Region number to be cleared. +*/ +__STATIC_INLINE void ARM_MPU_ClrRegion_NS(uint32_t rnr) +{ + ARM_MPU_ClrRegionEx(MPU_NS, rnr); +} +#endif + +/** Configure the given MPU region of the given MPU. +* \param mpu Pointer to MPU to be used. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegionEx(MPU_Type* mpu, uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + mpu->RNR = rnr; + mpu->RBAR = rbar; + mpu->RLAR = rlar; +} + +/** Configure the given MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU, rnr, rbar, rlar); +} + +#ifdef MPU_NS +/** Configure the given Non-secure MPU region. +* \param rnr Region number to be configured. +* \param rbar Value for RBAR register. +* \param rlar Value for RLAR register. +*/ +__STATIC_INLINE void ARM_MPU_SetRegion_NS(uint32_t rnr, uint32_t rbar, uint32_t rlar) +{ + ARM_MPU_SetRegionEx(MPU_NS, rnr, rbar, rlar); +} +#endif + +/** Memcopy with strictly ordered memory access, e.g. for register targets. +* \param dst Destination data is copied to. +* \param src Source data is copied from. +* \param len Amount of data words to be copied. +*/ +__STATIC_INLINE void ARM_MPU_OrderedMemcpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len) +{ + uint32_t i; + for (i = 0U; i < len; ++i) + { + dst[i] = src[i]; + } +} + +/** Load the given number of MPU regions from a table to the given MPU. +* \param mpu Pointer to the MPU registers to be used. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_LoadEx(MPU_Type* mpu, uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U; + if (cnt == 1U) { + mpu->RNR = rnr; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR), &(table->RBAR), rowWordSize); + } else { + uint32_t rnrBase = rnr & ~(MPU_TYPE_RALIASES-1U); + uint32_t rnrOffset = rnr % MPU_TYPE_RALIASES; + + mpu->RNR = rnrBase; + while ((rnrOffset + cnt) > MPU_TYPE_RALIASES) { + uint32_t c = MPU_TYPE_RALIASES - rnrOffset; + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), c*rowWordSize); + table += c; + cnt -= c; + rnrOffset = 0U; + rnrBase += MPU_TYPE_RALIASES; + mpu->RNR = rnrBase; + } + + ARM_MPU_OrderedMemcpy(&(mpu->RBAR)+(rnrOffset*2U), &(table->RBAR), cnt*rowWordSize); + } +} + +/** Load the given number of MPU regions from a table. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU, rnr, table, cnt); +} + +#ifdef MPU_NS +/** Load the given number of MPU regions from a table to the Non-secure MPU. +* \param rnr First region number to be configured. +* \param table Pointer to the MPU configuration table. +* \param cnt Amount of regions to be configured. +*/ +__STATIC_INLINE void ARM_MPU_Load_NS(uint32_t rnr, ARM_MPU_Region_t const* table, uint32_t cnt) +{ + ARM_MPU_LoadEx(MPU_NS, rnr, table, cnt); +} +#endif + +#endif + diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/pmu_armv8.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/pmu_armv8.h new file mode 100644 index 0000000000..23b37d95e4 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/pmu_armv8.h @@ -0,0 +1,337 @@ +/****************************************************************************** + * @file pmu_armv8.h + * @brief CMSIS PMU API for Armv8.1-M PMU + * @version V1.0.0 + * @date 24. March 2020 + ******************************************************************************/ +/* + * Copyright (c) 2020 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef ARM_PMU_ARMV8_H +#define ARM_PMU_ARMV8_H + +/** + * \brief PMU Events + * \note See the Armv8.1-M Architecture Reference Manual for full details on these PMU events. + * */ + +#define ARM_PMU_SW_INCR 0x0000 /*!< Software update to the PMU_SWINC register, architecturally executed and condition code check pass */ +#define ARM_PMU_L1I_CACHE_REFILL 0x0001 /*!< L1 I-Cache refill */ +#define ARM_PMU_L1D_CACHE_REFILL 0x0003 /*!< L1 D-Cache refill */ +#define ARM_PMU_L1D_CACHE 0x0004 /*!< L1 D-Cache access */ +#define ARM_PMU_LD_RETIRED 0x0006 /*!< Memory-reading instruction architecturally executed and condition code check pass */ +#define ARM_PMU_ST_RETIRED 0x0007 /*!< Memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_INST_RETIRED 0x0008 /*!< Instruction architecturally executed */ +#define ARM_PMU_EXC_TAKEN 0x0009 /*!< Exception entry */ +#define ARM_PMU_EXC_RETURN 0x000A /*!< Exception return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_PC_WRITE_RETIRED 0x000C /*!< Software change to the Program Counter (PC). Instruction is architecturally executed and condition code check pass */ +#define ARM_PMU_BR_IMMED_RETIRED 0x000D /*!< Immediate branch architecturally executed */ +#define ARM_PMU_BR_RETURN_RETIRED 0x000E /*!< Function return instruction architecturally executed and the condition code check pass */ +#define ARM_PMU_UNALIGNED_LDST_RETIRED 0x000F /*!< Unaligned memory memory-reading or memory-writing instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BR_MIS_PRED 0x0010 /*!< Mispredicted or not predicted branch speculatively executed */ +#define ARM_PMU_CPU_CYCLES 0x0011 /*!< Cycle */ +#define ARM_PMU_BR_PRED 0x0012 /*!< Predictable branch speculatively executed */ +#define ARM_PMU_MEM_ACCESS 0x0013 /*!< Data memory access */ +#define ARM_PMU_L1I_CACHE 0x0014 /*!< Level 1 instruction cache access */ +#define ARM_PMU_L1D_CACHE_WB 0x0015 /*!< Level 1 data cache write-back */ +#define ARM_PMU_L2D_CACHE 0x0016 /*!< Level 2 data cache access */ +#define ARM_PMU_L2D_CACHE_REFILL 0x0017 /*!< Level 2 data cache refill */ +#define ARM_PMU_L2D_CACHE_WB 0x0018 /*!< Level 2 data cache write-back */ +#define ARM_PMU_BUS_ACCESS 0x0019 /*!< Bus access */ +#define ARM_PMU_MEMORY_ERROR 0x001A /*!< Local memory error */ +#define ARM_PMU_INST_SPEC 0x001B /*!< Instruction speculatively executed */ +#define ARM_PMU_BUS_CYCLES 0x001D /*!< Bus cycles */ +#define ARM_PMU_CHAIN 0x001E /*!< For an odd numbered counter, increment when an overflow occurs on the preceding even-numbered counter on the same PE */ +#define ARM_PMU_L1D_CACHE_ALLOCATE 0x001F /*!< Level 1 data cache allocation without refill */ +#define ARM_PMU_L2D_CACHE_ALLOCATE 0x0020 /*!< Level 2 data cache allocation without refill */ +#define ARM_PMU_BR_RETIRED 0x0021 /*!< Branch instruction architecturally executed */ +#define ARM_PMU_BR_MIS_PRED_RETIRED 0x0022 /*!< Mispredicted branch instruction architecturally executed */ +#define ARM_PMU_STALL_FRONTEND 0x0023 /*!< No operation issued because of the frontend */ +#define ARM_PMU_STALL_BACKEND 0x0024 /*!< No operation issued because of the backend */ +#define ARM_PMU_L2I_CACHE 0x0027 /*!< Level 2 instruction cache access */ +#define ARM_PMU_L2I_CACHE_REFILL 0x0028 /*!< Level 2 instruction cache refill */ +#define ARM_PMU_L3D_CACHE_ALLOCATE 0x0029 /*!< Level 3 data cache allocation without refill */ +#define ARM_PMU_L3D_CACHE_REFILL 0x002A /*!< Level 3 data cache refill */ +#define ARM_PMU_L3D_CACHE 0x002B /*!< Level 3 data cache access */ +#define ARM_PMU_L3D_CACHE_WB 0x002C /*!< Level 3 data cache write-back */ +#define ARM_PMU_LL_CACHE_RD 0x0036 /*!< Last level data cache read */ +#define ARM_PMU_LL_CACHE_MISS_RD 0x0037 /*!< Last level data cache read miss */ +#define ARM_PMU_L1D_CACHE_MISS_RD 0x0039 /*!< Level 1 data cache read miss */ +#define ARM_PMU_OP_COMPLETE 0x003A /*!< Operation retired */ +#define ARM_PMU_OP_SPEC 0x003B /*!< Operation speculatively executed */ +#define ARM_PMU_STALL 0x003C /*!< Stall cycle for instruction or operation not sent for execution */ +#define ARM_PMU_STALL_OP_BACKEND 0x003D /*!< Stall cycle for instruction or operation not sent for execution due to pipeline backend */ +#define ARM_PMU_STALL_OP_FRONTEND 0x003E /*!< Stall cycle for instruction or operation not sent for execution due to pipeline frontend */ +#define ARM_PMU_STALL_OP 0x003F /*!< Instruction or operation slots not occupied each cycle */ +#define ARM_PMU_L1D_CACHE_RD 0x0040 /*!< Level 1 data cache read */ +#define ARM_PMU_LE_RETIRED 0x0100 /*!< Loop end instruction executed */ +#define ARM_PMU_LE_SPEC 0x0101 /*!< Loop end instruction speculatively executed */ +#define ARM_PMU_BF_RETIRED 0x0104 /*!< Branch future instruction architecturally executed and condition code check pass */ +#define ARM_PMU_BF_SPEC 0x0105 /*!< Branch future instruction speculatively executed and condition code check pass */ +#define ARM_PMU_LE_CANCEL 0x0108 /*!< Loop end instruction not taken */ +#define ARM_PMU_BF_CANCEL 0x0109 /*!< Branch future instruction not taken */ +#define ARM_PMU_SE_CALL_S 0x0114 /*!< Call to secure function, resulting in Security state change */ +#define ARM_PMU_SE_CALL_NS 0x0115 /*!< Call to non-secure function, resulting in Security state change */ +#define ARM_PMU_DWT_CMPMATCH0 0x0118 /*!< DWT comparator 0 match */ +#define ARM_PMU_DWT_CMPMATCH1 0x0119 /*!< DWT comparator 1 match */ +#define ARM_PMU_DWT_CMPMATCH2 0x011A /*!< DWT comparator 2 match */ +#define ARM_PMU_DWT_CMPMATCH3 0x011B /*!< DWT comparator 3 match */ +#define ARM_PMU_MVE_INST_RETIRED 0x0200 /*!< MVE instruction architecturally executed */ +#define ARM_PMU_MVE_INST_SPEC 0x0201 /*!< MVE instruction speculatively executed */ +#define ARM_PMU_MVE_FP_RETIRED 0x0204 /*!< MVE floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SPEC 0x0205 /*!< MVE floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_HP_RETIRED 0x0208 /*!< MVE half-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_HP_SPEC 0x0209 /*!< MVE half-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_SP_RETIRED 0x020C /*!< MVE single-precision floating-point instruction architecturally executed */ +#define ARM_PMU_MVE_FP_SP_SPEC 0x020D /*!< MVE single-precision floating-point instruction speculatively executed */ +#define ARM_PMU_MVE_FP_MAC_RETIRED 0x0214 /*!< MVE floating-point multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_FP_MAC_SPEC 0x0215 /*!< MVE floating-point multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_INT_RETIRED 0x0224 /*!< MVE integer instruction architecturally executed */ +#define ARM_PMU_MVE_INT_SPEC 0x0225 /*!< MVE integer instruction speculatively executed */ +#define ARM_PMU_MVE_INT_MAC_RETIRED 0x0228 /*!< MVE multiply or multiply-accumulate instruction architecturally executed */ +#define ARM_PMU_MVE_INT_MAC_SPEC 0x0229 /*!< MVE multiply or multiply-accumulate instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_RETIRED 0x0238 /*!< MVE load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_SPEC 0x0239 /*!< MVE load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_RETIRED 0x023C /*!< MVE load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_SPEC 0x023D /*!< MVE load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_RETIRED 0x0240 /*!< MVE store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_SPEC 0x0241 /*!< MVE store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_CONTIG_RETIRED 0x0244 /*!< MVE contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_CONTIG_SPEC 0x0245 /*!< MVE contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_CONTIG_RETIRED 0x0248 /*!< MVE contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_CONTIG_SPEC 0x0249 /*!< MVE contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_CONTIG_RETIRED 0x024C /*!< MVE contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_CONTIG_SPEC 0x024D /*!< MVE contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_RETIRED 0x0250 /*!< MVE non-contiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_NONCONTIG_SPEC 0x0251 /*!< MVE non-contiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_RETIRED 0x0254 /*!< MVE non-contiguous load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_NONCONTIG_SPEC 0x0255 /*!< MVE non-contiguous load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_RETIRED 0x0258 /*!< MVE non-contiguous store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_NONCONTIG_SPEC 0x0259 /*!< MVE non-contiguous store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_MULTI_RETIRED 0x025C /*!< MVE memory instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LDST_MULTI_SPEC 0x025D /*!< MVE memory instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LD_MULTI_RETIRED 0x0260 /*!< MVE memory load instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_LD_MULTI_SPEC 0x0261 /*!< MVE memory load instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_ST_MULTI_RETIRED 0x0261 /*!< MVE memory store instruction targeting multiple registers architecturally executed */ +#define ARM_PMU_MVE_ST_MULTI_SPEC 0x0265 /*!< MVE memory store instruction targeting multiple registers speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_RETIRED 0x028C /*!< MVE unaligned memory load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_SPEC 0x028D /*!< MVE unaligned memory load or store instruction speculatively executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_RETIRED 0x0290 /*!< MVE unaligned load instruction architecturally executed */ +#define ARM_PMU_MVE_LD_UNALIGNED_SPEC 0x0291 /*!< MVE unaligned load instruction speculatively executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_RETIRED 0x0294 /*!< MVE unaligned store instruction architecturally executed */ +#define ARM_PMU_MVE_ST_UNALIGNED_SPEC 0x0295 /*!< MVE unaligned store instruction speculatively executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_RETIRED 0x0298 /*!< MVE unaligned noncontiguous load or store instruction architecturally executed */ +#define ARM_PMU_MVE_LDST_UNALIGNED_NONCONTIG_SPEC 0x0299 /*!< MVE unaligned noncontiguous load or store instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_RETIRED 0x02A0 /*!< MVE vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_SPEC 0x02A1 /*!< MVE vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_FP_RETIRED 0x02A4 /*!< MVE floating-point vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_FP_SPEC 0x02A5 /*!< MVE floating-point vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_VREDUCE_INT_RETIRED 0x02A8 /*!< MVE integer vector reduction instruction architecturally executed */ +#define ARM_PMU_MVE_VREDUCE_INT_SPEC 0x02A9 /*!< MVE integer vector reduction instruction speculatively executed */ +#define ARM_PMU_MVE_PRED 0x02B8 /*!< Cycles where one or more predicated beats architecturally executed */ +#define ARM_PMU_MVE_STALL 0x02CC /*!< Stall cycles caused by an MVE instruction */ +#define ARM_PMU_MVE_STALL_RESOURCE 0x02CD /*!< Stall cycles caused by an MVE instruction because of resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_MEM 0x02CE /*!< Stall cycles caused by an MVE instruction because of memory resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_FP 0x02CF /*!< Stall cycles caused by an MVE instruction because of floating-point resource conflicts */ +#define ARM_PMU_MVE_STALL_RESOURCE_INT 0x02D0 /*!< Stall cycles caused by an MVE instruction because of integer resource conflicts */ +#define ARM_PMU_MVE_STALL_BREAK 0x02D3 /*!< Stall cycles caused by an MVE chain break */ +#define ARM_PMU_MVE_STALL_DEPENDENCY 0x02D4 /*!< Stall cycles caused by MVE register dependency */ +#define ARM_PMU_ITCM_ACCESS 0x4007 /*!< Instruction TCM access */ +#define ARM_PMU_DTCM_ACCESS 0x4008 /*!< Data TCM access */ +#define ARM_PMU_TRCEXTOUT0 0x4010 /*!< ETM external output 0 */ +#define ARM_PMU_TRCEXTOUT1 0x4011 /*!< ETM external output 1 */ +#define ARM_PMU_TRCEXTOUT2 0x4012 /*!< ETM external output 2 */ +#define ARM_PMU_TRCEXTOUT3 0x4013 /*!< ETM external output 3 */ +#define ARM_PMU_CTI_TRIGOUT4 0x4018 /*!< Cross-trigger Interface output trigger 4 */ +#define ARM_PMU_CTI_TRIGOUT5 0x4019 /*!< Cross-trigger Interface output trigger 5 */ +#define ARM_PMU_CTI_TRIGOUT6 0x401A /*!< Cross-trigger Interface output trigger 6 */ +#define ARM_PMU_CTI_TRIGOUT7 0x401B /*!< Cross-trigger Interface output trigger 7 */ + +/** \brief PMU Functions */ + +__STATIC_INLINE void ARM_PMU_Enable(void); +__STATIC_INLINE void ARM_PMU_Disable(void); + +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type); + +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void); +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void); + +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void); +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num); + +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void); +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask); +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask); + +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask); + +/** + \brief Enable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Enable(void) +{ + PMU->CTRL |= PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Disable the PMU +*/ +__STATIC_INLINE void ARM_PMU_Disable(void) +{ + PMU->CTRL &= ~PMU_CTRL_ENABLE_Msk; +} + +/** + \brief Set event to count for PMU eventer counter + \param [in] num Event counter (0-30) to configure + \param [in] type Event to count +*/ +__STATIC_INLINE void ARM_PMU_Set_EVTYPER(uint32_t num, uint32_t type) +{ + PMU->EVTYPER[num] = type; +} + +/** + \brief Reset cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CYCCNT_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_CYCCNT_RESET_Msk; +} + +/** + \brief Reset all event counters +*/ +__STATIC_INLINE void ARM_PMU_EVCNTR_ALL_Reset(void) +{ + PMU->CTRL |= PMU_CTRL_EVENTCNT_RESET_Msk; +} + +/** + \brief Enable counters + \param [in] mask Counters to enable + \note Enables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Enable(uint32_t mask) +{ + PMU->CNTENSET = mask; +} + +/** + \brief Disable counters + \param [in] mask Counters to enable + \note Disables one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Disable(uint32_t mask) +{ + PMU->CNTENCLR = mask; +} + +/** + \brief Read cycle counter + \return Cycle count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CCNTR(void) +{ + return PMU->CCNTR; +} + +/** + \brief Read event counter + \param [in] num Event counter (0-30) to read + \return Event count +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_EVCNTR(uint32_t num) +{ + return PMU->EVCNTR[num]; +} + +/** + \brief Read counter overflow status + \return Counter overflow status bits for the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE uint32_t ARM_PMU_Get_CNTR_OVS(void) +{ + return PMU->OVSSET; +} + +/** + \brief Clear counter overflow status + \param [in] mask Counter overflow status bits to clear + \note Clears overflow status bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_OVS(uint32_t mask) +{ + PMU->OVSCLR = mask; +} + +/** + \brief Enable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to set + \note Sets overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Enable(uint32_t mask) +{ + PMU->INTENSET = mask; +} + +/** + \brief Disable counter overflow interrupt request + \param [in] mask Counter overflow interrupt request bits to clear + \note Clears overflow interrupt request bits for one or more of the following: + - event counters (0-30) + - cycle counter +*/ +__STATIC_INLINE void ARM_PMU_Set_CNTR_IRQ_Disable(uint32_t mask) +{ + PMU->INTENCLR = mask; +} + +/** + \brief Software increment event counter + \param [in] mask Counters to increment + \note Software increment bits for one or more event counters (0-30) +*/ +__STATIC_INLINE void ARM_PMU_CNTR_Increment(uint32_t mask) +{ + PMU->SWINC = mask; +} + +#endif diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/tz_context.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/tz_context.h new file mode 100644 index 0000000000..facc2c9a47 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/CoreSupport/tz_context.h @@ -0,0 +1,70 @@ +/****************************************************************************** + * @file tz_context.h + * @brief Context Management for Armv8-M TrustZone + * @version V1.0.1 + * @date 10. January 2018 + ******************************************************************************/ +/* + * Copyright (c) 2017-2018 Arm Limited. All rights reserved. + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined ( __ICCARM__ ) + #pragma system_include /* treat file as system include file for MISRA check */ +#elif defined (__clang__) + #pragma clang system_header /* treat file as system include file */ +#endif + +#ifndef TZ_CONTEXT_H +#define TZ_CONTEXT_H + +#include <stdint.h> + +#ifndef TZ_MODULEID_T +#define TZ_MODULEID_T +/// \details Data type that identifies secure software modules called by a process. +typedef uint32_t TZ_ModuleId_t; +#endif + +/// \details TZ Memory ID identifies an allocated memory slot. +typedef uint32_t TZ_MemoryId_t; + +/// Initialize secure context memory system +/// \return execution status (1: success, 0: error) +uint32_t TZ_InitContextSystem_S (void); + +/// Allocate context memory for calling secure software modules in TrustZone +/// \param[in] module identifies software modules called from non-secure mode +/// \return value != 0 id TrustZone memory slot identifier +/// \return value 0 no memory available or internal error +TZ_MemoryId_t TZ_AllocModuleContext_S (TZ_ModuleId_t module); + +/// Free context memory that was previously allocated with \ref TZ_AllocModuleContext_S +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_FreeModuleContext_S (TZ_MemoryId_t id); + +/// Load secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_LoadContext_S (TZ_MemoryId_t id); + +/// Store secure context (called on RTOS thread context switch) +/// \param[in] id TrustZone memory slot identifier +/// \return execution status (1: success, 0: error) +uint32_t TZ_StoreContext_S (TZ_MemoryId_t id); + +#endif // TZ_CONTEXT_H diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/SWM341.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/SWM341.h new file mode 100644 index 0000000000..ef4e3e275d --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/SWM341.h @@ -0,0 +1,4062 @@ +#ifndef __SWM341_H__ +#define __SWM341_H__ + +/* + * ========================================================================== + * ---------- Interrupt Number Definition ----------------------------------- + * ========================================================================== + */ +typedef enum IRQn +{ +/****** Cortex-M0 Processor Exceptions Numbers **********************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */ + +/****** Cortex-M4 specific Interrupt Numbers ************************************************/ + UART0_IRQn = 0, + UART1_IRQn = 1, + TIMR0_IRQn = 2, + TIMR1_IRQn = 3, + DMA_IRQn = 4, + SPI0_IRQn = 5, + PWM0_IRQn = 6, + WDT_IRQn = 7, + UART2_IRQn = 8, + PWM1_IRQn = 9, + ADC0_IRQn = 10, + BTIMR0_IRQn = 11, + HALL0_IRQn = 12, + PWM2_IRQn = 13, + PWMBRK_IRQn = 14, + I2C0_IRQn = 15, + CAN0_IRQn = 16, + SPI1_IRQn = 17, + RTC_IRQn = 18, + PWM3_IRQn = 19, + TIMR2_IRQn = 20, + UART3_IRQn = 21, + TIMR3_IRQn = 22, + ADC1_IRQn = 23, + BOD_IRQn = 24, + CORDIC_IRQn = 25, + BTIMR1_IRQn = 26, + PWM4_IRQn = 27, + HALL3_IRQn = 28, + BTIMR2_IRQn = 29, + I2C1_IRQn = 30, + BTIMR3_IRQn = 31, + ACMP_IRQn = 32, + XTALSTOP_IRQn = 33, + FSPI_IRQn = 34, + GPIOA_IRQn = 35, + GPIOB_IRQn = 36, + GPIOC_IRQn = 37, + GPIOD_IRQn = 38, + GPIOM_IRQn = 39, + GPION_IRQn = 40, + GPIOA0_IRQn = 41, + GPIOA1_IRQn = 42, + GPIOA5_IRQn = 43, + GPIOA6_IRQn = 44, + GPIOA10_IRQn = 45, + GPIOA11_IRQn = 46, + GPIOA12_IRQn = 47, + GPIOA13_IRQn = 48, + GPIOB0_IRQn = 49, + GPIOB1_IRQn = 50, + GPIOB2_IRQn = 51, + GPIOC0_IRQn = 52, + GPIOC1_IRQn = 53, + GPIOC2_IRQn = 54, + GPIOC3_IRQn = 55, + GPIOC4_IRQn = 56, + GPIOD3_IRQn = 57, + GPIOD4_IRQn = 58, + GPIOD5_IRQn = 59, + GPIOD6_IRQn = 60, + GPIOD7_IRQn = 61, + GPIOD8_IRQn = 62, + GPIOC9_IRQn = 63, + GPIOC10_IRQn = 64, + GPIOC11_IRQn = 65, + GPIOC12_IRQn = 66, + GPIOM0_IRQn = 67, + GPIOM1_IRQn = 68, + GPIOM2_IRQn = 69, + GPIOM3_IRQn = 70, + GPIOM4_IRQn = 71, + DIV_IRQn = 72, + LCD_IRQn = 73, + GPIOE_IRQn = 74, + JPEG_IRQn = 75, + SDIO_IRQn = 76, + USB_IRQn = 77, + CAN1_IRQn = 78, + TIMR4_IRQn = 79, + BTIMR4_IRQn = 80, + BTIMR5_IRQn = 81, + BTIMR6_IRQn = 82, + BTIMR7_IRQn = 83, + BTIMR8_IRQn = 84, + BTIMR9_IRQn = 85, + BTIMR10_IRQn = 86, + BTIMR11_IRQn = 87, + DMA2D_IRQn = 88, + QEI_IRQn = 90, +} IRQn_Type; + +/* + * ========================================================================== + * ----------- Processor and Core Peripheral Section ------------------------ + * ========================================================================== + */ + +/* Configuration of the Cortex-M4 Processor and Core Peripherals */ +#define __CM33_REV 0x0000 /*!< Core revision r0p1 */ +#define __NVIC_PRIO_BITS 3 /*!< SWM341 uses 3 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __DSP_PRESENT 1 /*!< DSP extension present */ +#define __FPU_PRESENT 1 /*!< FPU present */ +#define __MPU_PRESENT 1 /*!< MPU present */ + +#if defined ( __CC_ARM ) + #pragma anon_unions +#endif + +#include <stdio.h> +#include <stdint.h> +#include <stdbool.h> +#include "core_cm33.h" +#include "system_SWM341.h" + + +/******************************************************************************/ +/* Device Specific Peripheral registers structures */ +/******************************************************************************/ +typedef struct { + __IO uint32_t CLKSEL; //Clock Select + + __IO uint32_t CLKDIVx_ON; //[0] CLK_DIVx时钟源开关 + + __IO uint32_t CLKEN0; //Clock Enable + + __IO uint32_t CLKEN1; + + __IO uint32_t SLEEP; + + uint32_t RESERVED[4]; + + __IO uint32_t RSTSR; //Reset Status + + uint32_t RESERVED2[2]; + + __IO uint32_t RTCWKCR; //RTC Wakeup Control + + __IO uint32_t RTCWKSR; + + uint32_t RESERVED3[14]; + + __IO uint32_t USBPHYCR; + + __IO uint32_t USBCR; + + uint32_t RESERVED4[2]; + + __I uint32_t CHIPID[4]; + + __IO uint32_t BACKUP[4]; //Data Backup Register + + uint32_t RESERVED5[12]; + + __IO uint32_t PRNGCR; + __IO uint32_t PRNGDL; //PRNG Data Low Word + __IO uint32_t PRNGDH; + + uint32_t RESERVED6[9]; + + __IO uint32_t PAWKEN; //PORTA Wakeup Enable + __IO uint32_t PBWKEN; + __IO uint32_t PCWKEN; + __IO uint32_t PDWKEN; + __IO uint32_t PEWKEN; + + uint32_t RESERVED7[3]; + + __IO uint32_t PMWKEN; + __IO uint32_t PNWKEN; + + uint32_t RESERVED8[2]; + + __IO uint32_t PAWKSR; //PORTA Wakeup Status,写1清零 + __IO uint32_t PBWKSR; + __IO uint32_t PCWKSR; + __IO uint32_t PDWKSR; + __IO uint32_t PEWKSR; + + uint32_t RESERVED9[3]; + + __IO uint32_t PMWKSR; + __IO uint32_t PNWKSR; + + uint32_t RESERVED10[(0x400-0x154)/4-1]; + + __IO uint32_t IOFILT0; //IO Filter 0 + __IO uint32_t IOFILT1; + + uint32_t RESERVED11[(0x720-0x404)/4-1]; + + __IO uint32_t PRSTEN; //外设复位使能,只有当PRSTEN的值为0x55时,才能写PRSTR0、PRSTR1 + __IO uint32_t PRSTR0; + __IO uint32_t PRSTR1; + + //Analog Control: 0x400AA000 + uint32_t RESERVED12[(0x400AA000-0x40000728)/4-1]; + + __IO uint32_t HRCCR; //High speed RC Control Register + uint32_t RESERVED13[3]; + + __IO uint32_t BODCR; + __IO uint32_t BODSR; + + __IO uint32_t ADCCR; + + uint32_t RESERVED14; + + __IO uint32_t XTALCR; + __IO uint32_t XTALSR; + + uint32_t RESERVED15[6]; + + __IO uint32_t PLLCR; + __IO uint32_t PLLDIV; + uint32_t RESERVED16; + __IO uint32_t PLLLOCK; //[0] 1 PLL已锁定 + + __IO uint32_t LRCCR; //Low speed RC Control Register + + uint32_t RESERVED17[7]; + + __IO uint32_t OPACR; //OPA Control Register + + uint32_t RESERVED18[3]; + + __IO uint32_t ACMPCR; //Analog Comparator Control Register + __IO uint32_t ACMPSR; //Analog Comparator Status Register + __IO uint32_t ACMPCR2; + + uint32_t RESERVED19; + + __IO uint32_t DACCR; + + uint32_t RESERVED20; + + __IO uint32_t TEMPCR; //Temperature Sensor +} SYS_TypeDef; + + +#define SYS_CLKSEL_SYS_Pos 0 //系统时钟选择 1 HRC 0 CLK_DIVx +#define SYS_CLKSEL_SYS_Msk (0x01 << SYS_CLKSEL_SYS_Pos) +#define SYS_CLKSEL_CLK_DIVx_Pos 1 //选择CLK_DIVx 0 CLK_DIV1 1 CLK_DIV8 +#define SYS_CLKSEL_CLK_DIVx_Msk (0x01 << SYS_CLKSEL_CLK_DIVx_Pos) +#define SYS_CLKSEL_CLK_Pos 2 //Clock Source 0 LRC 1 PLL 2 XTAL_32K 3 XTAL 4 HRC +#define SYS_CLKSEL_CLK_Msk (0x07 << SYS_CLKSEL_CLK_Pos) +#define SYS_CLKSEL_RTC_Pos 5 //RTC时钟源选择 0 LRC 1 XTAL_32K +#define SYS_CLKSEL_RTC_Msk (0x01 << SYS_CLKSEL_RTC_Pos) +#define SYS_CLKSEL_IOFILT_Pos 6 //IO Filter时钟选择,0 HRC 2 XTAL 3 LRC +#define SYS_CLKSEL_IOFILT_Msk (0x03 << SYS_CLKSEL_IOFILT_Pos) +#define SYS_CLKSEL_SDIO_Pos 10 //SDIO时钟选择,0 SYSCLK/2 1 SYSCLK/8 2 SYSCLK/4 3 SYSCLK +#define SYS_CLKSEL_SDIO_Msk (0x03 << SYS_CLKSEL_SDIO_Pos) +#define SYS_CLKSEL_WDT_Pos 12 //看门狗时钟选择 0 HRC 1 XTAL 2 LRC 3 XTAL_32K +#define SYS_CLKSEL_WDT_Msk (0x03 << SYS_CLKSEL_WDT_Pos) +#define SYS_CLKSEL_AD0_Pos 16 //ADC0时钟选择 0 HRC 1 XTAL 2 PLL +#define SYS_CLKSEL_AD0_Msk (0x03 << SYS_CLKSEL_AD0_Pos) +#define SYS_CLKSEL_AD0DIV_Pos 18 //ADC0时钟分频 0 1分频 1 1分频 2 4分频 3 8分频 +#define SYS_CLKSEL_AD0DIV_Msk (0x03 << SYS_CLKSEL_AD0DIV_Pos) +#define SYS_CLKSEL_AD1_Pos 20 +#define SYS_CLKSEL_AD1_Msk (0x03 << SYS_CLKSEL_AD1_Pos) +#define SYS_CLKSEL_AD1DIV_Pos 22 +#define SYS_CLKSEL_AD1DIV_Msk (0x03 << SYS_CLKSEL_AD1DIV_Pos) +#define SYS_CLKSEL_SLEEP_Pos 24 //休眠时钟源 0 LRC 1 XTAL_32K +#define SYS_CLKSEL_SLEEP_Msk (0x01 << SYS_CLKSEL_SLEEP_Pos) + +#define SYS_CLKDIV_ON_Pos 0 +#define SYS_CLKDIV_ON_Msk (0x01 << SYS_CLKDIV_ON_Pos) + +#define SYS_CLKEN0_GPIOA_Pos 0 +#define SYS_CLKEN0_GPIOA_Msk (0x01 << SYS_CLKEN0_GPIOA_Pos) +#define SYS_CLKEN0_GPIOB_Pos 1 +#define SYS_CLKEN0_GPIOB_Msk (0x01 << SYS_CLKEN0_GPIOB_Pos) +#define SYS_CLKEN0_GPIOC_Pos 2 +#define SYS_CLKEN0_GPIOC_Msk (0x01 << SYS_CLKEN0_GPIOC_Pos) +#define SYS_CLKEN0_GPIOD_Pos 3 +#define SYS_CLKEN0_GPIOD_Msk (0x01 << SYS_CLKEN0_GPIOD_Pos) +#define SYS_CLKEN0_GPIOM_Pos 4 +#define SYS_CLKEN0_GPIOM_Msk (0x01 << SYS_CLKEN0_GPIOM_Pos) +#define SYS_CLKEN0_GPION_Pos 5 +#define SYS_CLKEN0_GPION_Msk (0x01 << SYS_CLKEN0_GPION_Pos) +#define SYS_CLKEN0_UART0_Pos 6 +#define SYS_CLKEN0_UART0_Msk (0x01 << SYS_CLKEN0_UART0_Pos) +#define SYS_CLKEN0_UART1_Pos 7 +#define SYS_CLKEN0_UART1_Msk (0x01 << SYS_CLKEN0_UART1_Pos) +#define SYS_CLKEN0_UART2_Pos 8 +#define SYS_CLKEN0_UART2_Msk (0x01 << SYS_CLKEN0_UART2_Pos) +#define SYS_CLKEN0_UART3_Pos 9 +#define SYS_CLKEN0_UART3_Msk (0x01 << SYS_CLKEN0_UART3_Pos) +#define SYS_CLKEN0_WDT_Pos 10 +#define SYS_CLKEN0_WDT_Msk (0x01 << SYS_CLKEN0_WDT_Pos) +#define SYS_CLKEN0_TIMR_Pos 11 +#define SYS_CLKEN0_TIMR_Msk (0x01 << SYS_CLKEN0_TIMR_Pos) +#define SYS_CLKEN0_PWM_Pos 12 +#define SYS_CLKEN0_PWM_Msk (0x01 << SYS_CLKEN0_PWM_Pos) +#define SYS_CLKEN0_SPI0_Pos 13 +#define SYS_CLKEN0_SPI0_Msk (0x01 << SYS_CLKEN0_SPI0_Pos) +#define SYS_CLKEN0_SPI1_Pos 14 +#define SYS_CLKEN0_SPI1_Msk (0x01 << SYS_CLKEN0_SPI1_Pos) +#define SYS_CLKEN0_I2C0_Pos 15 +#define SYS_CLKEN0_I2C0_Msk (0x01 << SYS_CLKEN0_I2C0_Pos) +#define SYS_CLKEN0_I2C1_Pos 16 +#define SYS_CLKEN0_I2C1_Msk (0x01 << SYS_CLKEN0_I2C1_Pos) +#define SYS_CLKEN0_CRC_Pos 19 +#define SYS_CLKEN0_CRC_Msk (0x01 << SYS_CLKEN0_CRC_Pos) +#define SYS_CLKEN0_CORDIC_Pos 20 +#define SYS_CLKEN0_CORDIC_Msk (0x01 << SYS_CLKEN0_CORDIC_Pos) +#define SYS_CLKEN0_DIV_Pos 21 +#define SYS_CLKEN0_DIV_Msk (0x01 << SYS_CLKEN0_DIV_Pos) +#define SYS_CLKEN0_SDIO_Pos 22 +#define SYS_CLKEN0_SDIO_Msk (0x01 << SYS_CLKEN0_SDIO_Pos) +#define SYS_CLKEN0_USB_Pos 24 +#define SYS_CLKEN0_USB_Msk (0x01 << SYS_CLKEN0_USB_Pos) +#define SYS_CLKEN0_ANAC_Pos 25 //模拟控制单元时钟使能 +#define SYS_CLKEN0_ANAC_Msk (0x01 << SYS_CLKEN0_ANAC_Pos) +#define SYS_CLKEN0_ADC0_Pos 26 +#define SYS_CLKEN0_ADC0_Msk (0x01 << SYS_CLKEN0_ADC0_Pos) +#define SYS_CLKEN0_CAN0_Pos 28 +#define SYS_CLKEN0_CAN0_Msk (0x01 << SYS_CLKEN0_CAN0_Pos) +#define SYS_CLKEN0_DMA2D_Pos 29 +#define SYS_CLKEN0_DMA2D_Msk (0x01 << SYS_CLKEN0_DMA2D_Pos) +#define SYS_CLKEN0_LCD_Pos 30 +#define SYS_CLKEN0_LCD_Msk (0x01 << SYS_CLKEN0_LCD_Pos) + +#define SYS_CLKEN1_GPIOE_Pos 0 +#define SYS_CLKEN1_GPIOE_Msk (0x01 << SYS_CLKEN1_GPIOE_Pos) +#define SYS_CLKEN1_SPI2_Pos 8 +#define SYS_CLKEN1_SPI2_Msk (0x01 << SYS_CLKEN1_SPI2_Pos) +#define SYS_CLKEN1_SDRAM_Pos 12 +#define SYS_CLKEN1_SDRAM_Msk (0x01 << SYS_CLKEN1_SDRAM_Pos) +#define SYS_CLKEN1_SFC_Pos 13 +#define SYS_CLKEN1_SFC_Msk (0x01 << SYS_CLKEN1_SFC_Pos) +#define SYS_CLKEN1_ADC1_Pos 16 +#define SYS_CLKEN1_ADC1_Msk (0x01 << SYS_CLKEN1_ADC1_Pos) +#define SYS_CLKEN1_CAN1_Pos 17 +#define SYS_CLKEN1_CAN1_Msk (0x01 << SYS_CLKEN1_CAN1_Pos) +#define SYS_CLKEN1_RTC_Pos 19 +#define SYS_CLKEN1_RTC_Msk (0x01 << SYS_CLKEN1_RTC_Pos) +#define SYS_CLKEN1_IOFILT_Pos 20 //IO Filter +#define SYS_CLKEN1_IOFILT_Msk (0x01 << SYS_CLKEN1_IOFILT_Pos) +#define SYS_CLKEN1_BTIMR_Pos 22 +#define SYS_CLKEN1_BTIMR_Msk (0x01 << SYS_CLKEN1_BTIMR_Pos) +#define SYS_CLKEN1_JPEG_Pos 25 +#define SYS_CLKEN1_JPEG_Msk (0x01 << SYS_CLKEN1_JPEG_Pos) +#define SYS_CLKEN1_DAC_Pos 26 +#define SYS_CLKEN1_DAC_Msk (0x01 << SYS_CLKEN1_DAC_Pos) +#define SYS_CLKEN1_QEI_Pos 27 +#define SYS_CLKEN1_QEI_Msk (0x01 << SYS_CLKEN1_QEI_Pos) + +#define SYS_SLEEP_SLEEP_Pos 0 //将该位置1后,系统将进入SLEEP模式 +#define SYS_SLEEP_SLEEP_Msk (0x01 << SYS_SLEEP_SLEEP_Pos) +#define SYS_SLEEP_STOP_Pos 1 //将该位置1后,系统将进入STOP SLEEP模式 +#define SYS_SLEEP_STOP_Msk (0x01 << SYS_SLEEP_STOP_Pos) + +#define SYS_RSTSR_POR_Pos 0 //1 出现过POR复位,写1清零 +#define SYS_RSTSR_POR_Msk (0x01 << SYS_RSTSR_POR_Pos) +#define SYS_RSTSR_WDT_Pos 1 //1 出现过WDT复位,写1清零 +#define SYS_RSTSR_WDT_Msk (0x01 << SYS_RSTSR_WDT_Pos) + +#define SYS_RTCWKCR_EN_Pos 0 //RTC唤醒使能 +#define SYS_RTCWKCR_EN_Msk (0x01 << SYS_RTCWKCR_EN_Pos) + +#define SYS_RTCWKSR_FLAG_Pos 0 //RTC唤醒标志,写1清零 +#define SYS_RTCWKSR_FLAG_Msk (0x01 << SYS_RTCWKSR_FLAG_Pos) + +#define SYS_USBPHYCR_IDEN_Pos 0 //ID PIN采样使能 +#define SYS_USBPHYCR_IDEN_Msk (0x01 << SYS_USBPHYCR_IDEN_Pos) +#define SYS_USBPHYCR_OPMODE_Pos 1 //0 Normal Operation 1 Non-Driving (Disable Pull-up register) +#define SYS_USBPHYCR_OPMODE_Msk (0x03 << SYS_USBPHYCR_OPMODE_Pos) +#define SYS_USBPHYCR_XCVR_Pos 4 //收发器模式选择,1 FS 2 LS +#define SYS_USBPHYCR_XCVR_Msk (0x03 << SYS_USBPHYCR_XCVR_Pos) +#define SYS_USBPHYCR_PLLEN_Pos 7 //PHY内置PLL开关 +#define SYS_USBPHYCR_PLLEN_Msk (0x01 << SYS_USBPHYCR_PLLEN_Pos) + +#define SYS_USBCR_RST48M_Pos 0 //USB控制器48M时钟域复位 +#define SYS_USBCR_RST48M_Msk (0x01 << SYS_USBCR_RST48M_Pos) +#define SYS_USBCR_RST12M_Pos 1 //USB控制器12M时钟域复位 +#define SYS_USBCR_RST12M_Msk (0x01 << SYS_USBCR_RST12M_Pos) +#define SYS_USBCR_RSTPLL_Pos 2 //USB控制器PLL时钟域复位 +#define SYS_USBCR_RSTPLL_Msk (0x01 << SYS_USBCR_RSTPLL_Pos) +#define SYS_USBCR_ROLE_Pos 3 //0 由ID引脚决定 2 Host 3 Device +#define SYS_USBCR_ROLE_Msk (0x03 << SYS_USBCR_ROLE_Pos) +#define SYS_USBCR_VBUS_Pos 5 //0 由VBUS引脚决定 1 强制为高 +#define SYS_USBCR_VBUS_Msk (0x01 << SYS_USBCR_VBUS_Pos) + +#define SYS_PRNGCR_CLR_Pos 0 //种子清零,至少保持一个LRC时钟周期 +#define SYS_PRNGCR_CLR_Msk (0x01 << SYS_PRNGCR_CLR_Pos) +#define SYS_PRNGCR_MODE_Pos 1 //0 关闭 2 三时钟模式(RCHF、RCLF、XTAH) 3 两时钟模式(RCHF、RCLF) +#define SYS_PRNGCR_MODE_Msk (0x03 << SYS_PRNGCR_MODE_Pos) +#define SYS_PRNGCR_RDY_Pos 8 //1 可以从PRNGDL和PRNGDH读取数据 +#define SYS_PRNGCR_RDY_Msk (0x01 << SYS_PRNGCR_RDY_Pos) + +#define SYS_IOFILT_TIM_Pos 0 //滤波窗口时间 = Tfilter_clk * 时钟分频 * 2^TIM +#define SYS_IOFILT_TIM_Msk (0x0F << SYS_IOFILT_TIM_Pos) +#define SYS_IOFILT_CLKDIV_Pos 4 //0 时钟不分频 1 时钟32分频 +#define SYS_IOFILT_CLKDIV_Msk (0x01 << SYS_IOFILT_CLKDIV_Pos) +#define SYS_IOFILT_IOSEL_Pos 5 //被滤波IO选择,每个IOFILT可为四个IO中的一个进行滤波 +#define SYS_IOFILT_IOSEL_Msk (0x03 << SYS_IOFILT_IOSEL_Pos) + +#define SYS_PRSTR0_GPIOA_Pos 0 //1 复位GPIOA 0 不复位 +#define SYS_PRSTR0_GPIOA_Msk (0x01 << SYS_PRSTR0_GPIOA_Pos) +#define SYS_PRSTR0_GPIOB_Pos 1 +#define SYS_PRSTR0_GPIOB_Msk (0x01 << SYS_PRSTR0_GPIOB_Pos) +#define SYS_PRSTR0_GPIOC_Pos 2 +#define SYS_PRSTR0_GPIOC_Msk (0x01 << SYS_PRSTR0_GPIOC_Pos) +#define SYS_PRSTR0_GPIOD_Pos 3 +#define SYS_PRSTR0_GPIOD_Msk (0x01 << SYS_PRSTR0_GPIOD_Pos) +#define SYS_PRSTR0_GPIOM_Pos 4 +#define SYS_PRSTR0_GPIOM_Msk (0x01 << SYS_PRSTR0_GPIOM_Pos) +#define SYS_PRSTR0_GPION_Pos 5 +#define SYS_PRSTR0_GPION_Msk (0x01 << SYS_PRSTR0_GPION_Pos) +#define SYS_PRSTR0_UART0_Pos 6 +#define SYS_PRSTR0_UART0_Msk (0x01 << SYS_PRSTR0_UART0_Pos) +#define SYS_PRSTR0_UART1_Pos 7 +#define SYS_PRSTR0_UART1_Msk (0x01 << SYS_PRSTR0_UART1_Pos) +#define SYS_PRSTR0_UART2_Pos 8 +#define SYS_PRSTR0_UART2_Msk (0x01 << SYS_PRSTR0_UART2_Pos) +#define SYS_PRSTR0_UART3_Pos 9 +#define SYS_PRSTR0_UART3_Msk (0x01 << SYS_PRSTR0_UART3_Pos) +#define SYS_PRSTR0_WDT_Pos 10 +#define SYS_PRSTR0_WDT_Msk (0x01 << SYS_PRSTR0_WDT_Pos) +#define SYS_PRSTR0_TIMR_Pos 11 +#define SYS_PRSTR0_TIMR_Msk (0x01 << SYS_PRSTR0_TIMR_Pos) +#define SYS_PRSTR0_PWM_Pos 12 +#define SYS_PRSTR0_PWM_Msk (0x01 << SYS_PRSTR0_PWM_Pos) +#define SYS_PRSTR0_SPI0_Pos 13 +#define SYS_PRSTR0_SPI0_Msk (0x01 << SYS_PRSTR0_SPI0_Pos) +#define SYS_PRSTR0_SPI1_Pos 14 +#define SYS_PRSTR0_SPI1_Msk (0x01 << SYS_PRSTR0_SPI1_Pos) +#define SYS_PRSTR0_I2C0_Pos 15 +#define SYS_PRSTR0_I2C0_Msk (0x01 << SYS_PRSTR0_I2C0_Pos) +#define SYS_PRSTR0_I2C1_Pos 16 +#define SYS_PRSTR0_I2C1_Msk (0x01 << SYS_PRSTR0_I2C1_Pos) +#define SYS_PRSTR0_CRC_Pos 19 +#define SYS_PRSTR0_CRC_Msk (0x01 << SYS_PRSTR0_CRC_Pos) +#define SYS_PRSTR0_CORDIC_Pos 20 +#define SYS_PRSTR0_CORDIC_Msk (0x01 << SYS_PRSTR0_CORDIC_Pos) +#define SYS_PRSTR0_DIV_Pos 21 +#define SYS_PRSTR0_DIV_Msk (0x01 << SYS_PRSTR0_DIV_Pos) +#define SYS_PRSTR0_SDIO_Pos 22 +#define SYS_PRSTR0_SDIO_Msk (0x01 << SYS_PRSTR0_SDIO_Pos) +#define SYS_PRSTR0_USB_Pos 24 +#define SYS_PRSTR0_USB_Msk (0x01 << SYS_PRSTR0_USB_Pos) +#define SYS_PRSTR0_ANAC_Pos 25 +#define SYS_PRSTR0_ANAC_Msk (0x01 << SYS_PRSTR0_ANAC_Pos) +#define SYS_PRSTR0_ADC0_Pos 26 +#define SYS_PRSTR0_ADC0_Msk (0x01 << SYS_PRSTR0_ADC0_Pos) +#define SYS_PRSTR0_CAN0_Pos 28 +#define SYS_PRSTR0_CAN0_Msk (0x01 << SYS_PRSTR0_CAN0_Pos) +#define SYS_PRSTR0_DMA2D_Pos 29 +#define SYS_PRSTR0_DMA2D_Msk (0x01 << SYS_PRSTR0_DMA2D_Pos) +#define SYS_PRSTR0_LCD_Pos 30 +#define SYS_PRSTR0_LCD_Msk (0x01 << SYS_PRSTR0_LCD_Pos) + +#define SYS_PRSTR1_GPIOE_Pos 0 +#define SYS_PRSTR1_GPIOE_Msk (0x01 << SYS_PRSTR1_GPIOE_Pos) +#define SYS_PRSTR1_SDRAM_Pos 12 +#define SYS_PRSTR1_SDRAM_Msk (0x01 << SYS_PRSTR1_SDRAM_Pos) +#define SYS_PRSTR1_SFC_Pos 13 +#define SYS_PRSTR1_SFC_Msk (0x01 << SYS_PRSTR1_SFC_Pos) +#define SYS_PRSTR1_ADC1_Pos 16 +#define SYS_PRSTR1_ADC1_Msk (0x01 << SYS_PRSTR1_ADC1_Pos) +#define SYS_PRSTR1_CAN1_Pos 17 +#define SYS_PRSTR1_CAN1_Msk (0x01 << SYS_PRSTR1_CAN1_Pos) +#define SYS_PRSTR1_RTC_Pos 19 +#define SYS_PRSTR1_RTC_Msk (0x01 << SYS_PRSTR1_RTC_Pos) +#define SYS_PRSTR1_IOFILT_Pos 20 +#define SYS_PRSTR1_IOFILT_Msk (0x01 << SYS_PRSTR1_IOFILT_Pos) +#define SYS_PRSTR1_BTIMR_Pos 22 +#define SYS_PRSTR1_BTIMR_Msk (0x01 << SYS_PRSTR1_BTIMR_Pos) +#define SYS_PRSTR1_JPEG_Pos 25 +#define SYS_PRSTR1_JPEG_Msk (0x01 << SYS_PRSTR1_JPEG_Pos) +#define SYS_PRSTR1_DAC_Pos 26 +#define SYS_PRSTR1_DAC_Msk (0x01 << SYS_PRSTR1_DAC_Pos) +#define SYS_PRSTR1_QEI_Pos 27 +#define SYS_PRSTR1_QEI_Msk (0x01 << SYS_PRSTR1_QEI_Pos) + +#define SYS_HRCCR_ON_Pos 0 //High speed RC ON +#define SYS_HRCCR_ON_Msk (0x01 << SYS_HRCCR_ON_Pos) +#define SYS_HRCCR_DBL_Pos 1 //Double Frequency 0 20MHz 1 40MHz +#define SYS_HRCCR_DBL_Msk (0x01 << SYS_HRCCR_DBL_Pos) + +#define SYS_BODCR_IE_Pos 1 //Interrupt Enable +#define SYS_BODCR_IE_Msk (0x01 << SYS_BODCR_IE_Pos) +#define SYS_BODCR_INTLVL_Pos 4 //BOD中断触发电平,0 1.9v 1 2.1v 2 2.3v 3 2.5v 4 2.7v +#define SYS_BODCR_INTLVL_Msk (0x07 << SYS_BODCR_INTLVL_Pos) +#define SYS_BODCR_RSTLVL_Pos 7 //BOD复位电平,0 1.7v 1 1.9v 2 2.1v 3 2.7v +#define SYS_BODCR_RSTLVL_Msk (0x07 << SYS_BODCR_RSTLVL_Pos) + +#define SYS_BODSR_IF_Pos 0 //中断标志,写1清零 +#define SYS_BODSR_IF_Msk (0x01 << SYS_BODSR_IF_Pos) +#define SYS_BODSR_ST_Pos 1 //BOD Status +#define SYS_BODSR_ST_Msk (0x01 << SYS_BODSR_ST_Pos) + +#define SYS_ADCCR_0IVREN_Pos 0 //ADC0 Internal Vref Enable +#define SYS_ADCCR_0IVREN_Msk (0x01 << SYS_ADCCR_0IVREN_Pos) +#define SYS_ADCCR_1IVREN_Pos 1 //ADC1 Internal Vref Enable +#define SYS_ADCCR_1IVREN_Msk (0x01 << SYS_ADCCR_1IVREN_Pos) +#define SYS_ADCCR_0IVRSEL_Pos 2 //ADC0 Internal Vref Select,0 基准电流乘以电阻 1 VDD33电阻分压 +#define SYS_ADCCR_0IVRSEL_Msk (0x01 << SYS_ADCCR_0IVRSEL_Pos) +#define SYS_ADCCR_1IVRSEL_Pos 3 //ADC1 Internal Vref Select,0 基准电流乘以电阻 1 VDD33电阻分压 +#define SYS_ADCCR_1IVRSEL_Msk (0x01 << SYS_ADCCR_1IVRSEL_Pos) +#define SYS_ADCCR_IVRFLT_Pos 4 //Internal Vref Filter,0 高通滤波 1 低通滤波 +#define SYS_ADCCR_IVRFLT_Msk (0x01 << SYS_ADCCR_IVRFLT_Pos) +#define SYS_ADCCR_IVROuA_Pos 5 //Internal Vref Output uA, 0 50uA 1 150uA +#define SYS_ADCCR_IVROuA_Msk (0x01 << SYS_ADCCR_IVROuA_Pos) +#define SYS_ADCCR_IVRLVL_Pos 6 //Internal Vref Output Level,X00b 1.2V X01 1.6V X10 2.0V X11 2.5V +#define SYS_ADCCR_IVRLVL_Msk (0x07 << SYS_ADCCR_IVRLVL_Pos) +#define SYS_ADCCR_IVRTRIM_Pos 9 //Internal Vref Output Level Trimming,000 +0V 001 +0.04V 010 +0.8V 011 +0.12V 100 -0.04V 101 -0.08V 110 -0.12V 111 -0.16V +#define SYS_ADCCR_IVRTRIM_Msk (0x07 << SYS_ADCCR_IVRTRIM_Pos) + +#define SYS_XTALCR_32KON_Pos 0 //XTAL_32K On +#define SYS_XTALCR_32KON_Msk (0x01 << SYS_XTALCR_32KON_Pos) +#define SYS_XTALCR_ON_Pos 1 //XTAL On +#define SYS_XTALCR_ON_Msk (0x01 << SYS_XTALCR_ON_Pos) +#define SYS_XTALCR_32KDET_Pos 4 //XTAL_32K Stop Detect +#define SYS_XTALCR_32KDET_Msk (0x01 << SYS_XTALCR_32KDET_Pos) +#define SYS_XTALCR_DET_Pos 5 //XTAL Stop Detect +#define SYS_XTALCR_DET_Msk (0x01 << SYS_XTALCR_DET_Pos) +#define SYS_XTALCR_32KDRV_Pos 8 //XTAL_32K 驱动能力,可微调频率 +#define SYS_XTALCR_32KDRV_Msk (0x0F << SYS_XTALCR_32KDRV_Pos) +#define SYS_XTALCR_DRV_Pos 16 //XTAL 驱动能力,可微调频率 +#define SYS_XTALCR_DRV_Msk (0x1F << SYS_XTALCR_DRV_Pos) + +#define SYS_XTALSR_32KSTOP_Pos 0 //XTAL_32K Stop,写1清零 +#define SYS_XTALSR_32KSTOP_Msk (0x01 << SYS_XTALSR_32KSTOP_Pos) +#define SYS_XTALSR_STOP_Pos 1 //XTAL Stop,写1清零 +#define SYS_XTALSR_STOP_Msk (0x01 << SYS_XTALSR_STOP_Pos) + +#define SYS_PLLCR_OUTEN_Pos 0 //只能LOCK后设置 +#define SYS_PLLCR_OUTEN_Msk (0x01 << SYS_PLLCR_OUTEN_Pos) +#define SYS_PLLCR_INSEL_Pos 1 //0 XTAL 1 HRC +#define SYS_PLLCR_INSEL_Msk (0x01 << SYS_PLLCR_INSEL_Pos) +#define SYS_PLLCR_OFF_Pos 2 +#define SYS_PLLCR_OFF_Msk (0x01 << SYS_PLLCR_OFF_Pos) +#define SYS_PLLCR_RST_Pos 3 +#define SYS_PLLCR_RST_Msk (0x01 << SYS_PLLCR_RST_Pos) + +#define SYS_PLLDIV_FBDIV_Pos 0 //PLL FeedBack分频寄存器 + //VCO输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV + //PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV +#define SYS_PLLDIV_FBDIV_Msk (0x1FF << SYS_PLLDIV_FBDIV_Pos) +#define SYS_PLLDIV_INDIV_Pos 16 //PLL 输入源时钟分频 +#define SYS_PLLDIV_INDIV_Msk (0x1F << SYS_PLLDIV_INDIV_Pos) +#define SYS_PLLDIV_OUTDIV_Pos 24 //PLL 输出分频,0 8分频 1 4分频 0 2分频 +#define SYS_PLLDIV_OUTDIV_Msk (0x03 << SYS_PLLDIV_OUTDIV_Pos) + +#define SYS_LRCCR_ON_Pos 0 //Low Speed RC On +#define SYS_LRCCR_ON_Msk (0x01 << SYS_LRCCR_ON_Pos) + +#define SYS_OPACR_OPA0ON_Pos 0 //OPA0 开启 +#define SYS_OPACR_OPA0ON_Msk (0x01 << SYS_OPACR_OPA0ON_Pos) +#define SYS_OPACR_OPA1ON_Pos 1 +#define SYS_OPACR_OPA1ON_Msk (0x01 << SYS_OPACR_OPA1ON_Pos) +#define SYS_OPACR_OPA2ON_Pos 2 +#define SYS_OPACR_OPA2ON_Msk (0x01 << SYS_OPACR_OPA2ON_Pos) +#define SYS_OPACR_OPA3ON_Pos 3 +#define SYS_OPACR_OPA3ON_Msk (0x01 << SYS_OPACR_OPA3ON_Pos) + +#define SYS_ACMPCR_CMP0ON_Pos 0 //CMP0 开启 +#define SYS_ACMPCR_CMP0ON_Msk (0x01 << SYS_ACMPCR_CMP0ON_Pos) +#define SYS_ACMPCR_CMP1ON_Pos 1 +#define SYS_ACMPCR_CMP1ON_Msk (0x01 << SYS_ACMPCR_CMP1ON_Pos) +#define SYS_ACMPCR_CMP2ON_Pos 2 +#define SYS_ACMPCR_CMP2ON_Msk (0x01 << SYS_ACMPCR_CMP2ON_Pos) +#define SYS_ACMPCR_CMP0HYS_Pos 8 //CMP0 迟滞开启 +#define SYS_ACMPCR_CMP0HYS_Msk (0x01 << SYS_ACMPCR_CMP0HYS_Pos) +#define SYS_ACMPCR_CMP1HYS_Pos 9 +#define SYS_ACMPCR_CMP1HYS_Msk (0x01 << SYS_ACMPCR_CMP1HYS_Pos) +#define SYS_ACMPCR_CMP2HYS_Pos 10 +#define SYS_ACMPCR_CMP2HYS_Msk (0x01 << SYS_ACMPCR_CMP2HYS_Pos) +#define SYS_ACMPCR_0NVREF_Pos 16 //1 ACMP0 N输入端接内部VREF +#define SYS_ACMPCR_0NVREF_Msk (0x01 << SYS_ACMPCR_0NVREF_Pos) +#define SYS_ACMPCR_1NVREF_Pos 17 +#define SYS_ACMPCR_1NVREF_Msk (0x01 << SYS_ACMPCR_1NVREF_Pos) +#define SYS_ACMPCR_2NVREF_Pos 18 +#define SYS_ACMPCR_2NVREF_Msk (0x01 << SYS_ACMPCR_2NVREF_Pos) +#define SYS_ACMPCR_CMP0IE_Pos 24 //CMP0 中断使能 +#define SYS_ACMPCR_CMP0IE_Msk (0x01 << SYS_ACMPCR_CMP0IE_Pos) +#define SYS_ACMPCR_CMP1IE_Pos 25 +#define SYS_ACMPCR_CMP1IE_Msk (0x01 << SYS_ACMPCR_CMP1IE_Pos) +#define SYS_ACMPCR_CMP2IE_Pos 26 +#define SYS_ACMPCR_CMP2IE_Msk (0x01 << SYS_ACMPCR_CMP2IE_Pos) + +#define SYS_ACMPSR_CMP0OUT_Pos 0 //0 N > P 1 P > N +#define SYS_ACMPSR_CMP0OUT_Msk (0x01 << SYS_ACMPSR_CMP0OUT_Pos) +#define SYS_ACMPSR_CMP1OUT_Pos 1 +#define SYS_ACMPSR_CMP1OUT_Msk (0x01 << SYS_ACMPSR_CMP1OUT_Pos) +#define SYS_ACMPSR_CMP2OUT_Pos 2 +#define SYS_ACMPSR_CMP2OUT_Msk (0x01 << SYS_ACMPSR_CMP2OUT_Pos) +#define SYS_ACMPSR_CMP0IF_Pos 8 //中断标志,写1清零 +#define SYS_ACMPSR_CMP0IF_Msk (0x01 << SYS_ACMPSR_CMP0IF_Pos) +#define SYS_ACMPSR_CMP1IF_Pos 9 +#define SYS_ACMPSR_CMP1IF_Msk (0x01 << SYS_ACMPSR_CMP1IF_Pos) +#define SYS_ACMPSR_CMP2IF_Pos 10 +#define SYS_ACMPSR_CMP2IF_Msk (0x01 << SYS_ACMPSR_CMP2IF_Pos) + +#define SYS_ACMPCR2_BRK0_Pos 0 //1 ACMP0输出连接用作PWM_BRK0 +#define SYS_ACMPCR2_BRK0_Msk (0x01 << SYS_ACMPCR2_BRK0_Pos) +#define SYS_ACMPCR2_BRK1_Pos 1 //1 ACMP1输出连接用作PWM_BRK1 +#define SYS_ACMPCR2_BRK1_Msk (0x01 << SYS_ACMPCR2_BRK1_Pos) +#define SYS_ACMPCR2_BRK2_Pos 2 +#define SYS_ACMPCR2_BRK2_Msk (0x01 << SYS_ACMPCR2_BRK2_Pos) +#define SYS_ACMPCR2_VREF_Pos 3 //ACMP内部基准电压VREF,电压值为 0.6 + 0.04*VREF +#define SYS_ACMPCR2_VREF_Msk (0x3F << SYS_ACMPCR2_VREF_Pos) + +#define SYS_DACCR_VRADJ_Pos 0 //Vref Adjust +#define SYS_DACCR_VRADJ_Msk (0x1F << SYS_DACCR_VRADJ_Pos) + +#define SYS_TEMPCR_EN_Pos 0 +#define SYS_TEMPCR_EN_Msk (0x01 << SYS_TEMPCR_EN_Pos) + + + + +typedef struct { + __IO uint32_t FUNC0; //引脚功能选择 + + __IO uint32_t FUNC1; + + uint32_t RESERVED[62]; + + __IO uint32_t PULLU; //上拉使能 + + uint32_t RESERVED2[63]; + + __IO uint32_t PULLD; //下拉使能 + + uint32_t RESERVED3[63]; + + __IO uint32_t INEN; //输入使能 + + uint32_t RESERVED4[63]; + + __IO uint32_t OPEND; //开漏使能 + + uint32_t RESERVED5[63]; + + __IO uint32_t DRVST; //驱动强度选择,0 4mA 1 8mA +} PORT_TypeDef; + + + + +typedef struct { + __IO uint32_t ODR; +#define PIN0 0 +#define PIN1 1 +#define PIN2 2 +#define PIN3 3 +#define PIN4 4 +#define PIN5 5 +#define PIN6 6 +#define PIN7 7 +#define PIN8 8 +#define PIN9 9 +#define PIN10 10 +#define PIN11 11 +#define PIN12 12 +#define PIN13 13 +#define PIN14 14 +#define PIN15 15 + + __IO uint32_t DIR; //0 输入 1 输出 + + __IO uint32_t INTLVLTRG; //Interrupt Level Trigger 1 电平触发中断 0 边沿触发中断 + + __IO uint32_t INTBE; //Both Edge,当INTLVLTRG设为边沿触发中断时,此位置1表示上升沿和下降沿都触发中断,置0时触发边沿由INTRISEEN选择 + + __IO uint32_t INTRISEEN; //Interrupt Rise Edge Enable 1 上升沿/高电平触发中断 0 下降沿/低电平触发中断 + + __IO uint32_t INTEN; //1 中断使能 0 中断禁止 + + __IO uint32_t INTRAWSTAT; //中断检测单元是否检测到了触发中断的条件 1 检测到了中断触发条件 0 没有检测到中断触发条件 + + __IO uint32_t INTSTAT; //INTSTAT.PIN0 = INTRAWSTAT.PIN0 & INTEN.PIN0 + + __IO uint32_t INTCLR; //写1清除中断标志,只对边沿触发中断有用 + + __IO uint32_t DMAEN; + + uint32_t RESERVED[2]; + + __IO uint32_t IDR; + + uint32_t RESERVED2[3]; + + __IO uint32_t DATAPIN0; //PIN0引脚的DATA寄存器,单个引脚对应整个32位寄存器,方便实现原子写操作 + __IO uint32_t DATAPIN1; + __IO uint32_t DATAPIN2; + __IO uint32_t DATAPIN3; + __IO uint32_t DATAPIN4; + __IO uint32_t DATAPIN5; + __IO uint32_t DATAPIN6; + __IO uint32_t DATAPIN7; + __IO uint32_t DATAPIN8; + __IO uint32_t DATAPIN9; + __IO uint32_t DATAPIN10; + __IO uint32_t DATAPIN11; + __IO uint32_t DATAPIN12; + __IO uint32_t DATAPIN13; + __IO uint32_t DATAPIN14; + __IO uint32_t DATAPIN15; +} GPIO_TypeDef; + + + + +typedef struct { + __IO uint32_t LOAD; //定时器加载值,使能后定时器从此数值开始向下递减计数 + + __I uint32_t VALUE; //定时器当前值,LDVAL-CVAL 可计算出计时时长 + + __IO uint32_t CR; + + uint32_t RESERVED; + + __IO uint32_t IE; + + __IO uint32_t IF; + + __IO uint32_t HALT; //[0] 1 暂停计数 0 恢复计数 + + __IO uint32_t OCCR; + __IO uint32_t OCMAT; + + __IO uint32_t RESERVED2; + + __IO uint32_t ICLOW; + __IO uint32_t ICHIGH; + + __IO uint32_t PREDIV; //预分频,8位 +} TIMR_TypeDef; + + +#define TIMR_LOAD_VALUE_Pos 0 +#define TIMR_LOAD_VALUE_Msk (0xFFFFFF << TIMR_LOAD_VALUE_Pos) +#define TIMR_LOAD_RELOAD_Pos 24 //reload VALUE to TIMR's internal Counter immediately. only for BTIMRx, not for TIMRx. +#define TIMR_LOAD_RELOAD_Msk (0x01 << TIMR_LOAD_RELOAD_Pos) + +#define TIMR_CR_CLKSRC_Pos 0 //时钟源: 0 内部系统时钟 2 外部引脚脉冲计数 +#define TIMR_CR_CLKSRC_Msk (0x03 << TIMR_CR_CLKSRC_Pos) +#define TIMR_CR_MODE_Pos 2 //工作模式:0 定时器 1 输入捕获 2 输出比较 +#define TIMR_CR_MODE_Msk (0x03 << TIMR_CR_MODE_Pos) + +#define TIMR_IE_TO_Pos 0 //Time out +#define TIMR_IE_TO_Msk (0x01 << TIMR_IE_TO_Pos) +#define TIMR_IE_OC0_Pos 1 //输出比较,第一个反转点 +#define TIMR_IE_OC0_Msk (0x01 << TIMR_IE_OC0_Pos) +#define TIMR_IE_OC1_Pos 2 //输出比较,第二个反转点 +#define TIMR_IE_OC1_Msk (0x01 << TIMR_IE_OC1_Pos) +#define TIMR_IE_ICR_Pos 3 //输入捕获,上升沿中断 +#define TIMR_IE_ICR_Msk (0x01 << TIMR_IE_ICR_Pos) +#define TIMR_IE_ICF_Pos 4 //输入捕获,下降沿中断 +#define TIMR_IE_ICF_Msk (0x01 << TIMR_IE_ICF_Pos) + +#define TIMR_IF_TO_Pos 0 //超时中断标志,写1清零 +#define TIMR_IF_TO_Msk (0x01 << TIMR_IF_TO_Pos) +#define TIMR_IF_OC0_Pos 1 +#define TIMR_IF_OC0_Msk (0x01 << TIMR_IF_OC0_Pos) +#define TIMR_IF_OC1_Pos 2 +#define TIMR_IF_OC1_Msk (0x01 << TIMR_IF_OC1_Pos) +#define TIMR_IF_ICR_Pos 3 +#define TIMR_IF_ICR_Msk (0x01 << TIMR_IF_ICR_Pos) +#define TIMR_IF_ICF_Pos 4 +#define TIMR_IF_ICF_Msk (0x01 << TIMR_IF_ICF_Pos) + +#define TIMR_OCCR_FORCELVL_Pos 0 //Force Levle,强制输出电平 +#define TIMR_OCCR_FORCELVL_Msk (0x01 << TIMR_OCCR_FORCELVL_Pos) +#define TIMR_OCCR_INITLVL_Pos 1 //Initial Level, 初始输出电平 +#define TIMR_OCCR_INITLVL_Msk (0x01 << TIMR_OCCR_INITLVL_Pos) +#define TIMR_OCCR_FORCEEN_Pos 2 //Force Enable, 强制输出使能 +#define TIMR_OCCR_FORCEEN_Msk (0x01 << TIMR_OCCR_FORCEEN_Pos) + + +typedef struct { + __IO uint32_t HALLIE; //HALL中断使能 + + uint32_t RESERVED; + + __IO uint32_t HALLIF; + + __IO uint32_t HALLEN; //HALL功能开关 + + __IO uint32_t HALL0V; //HALL0输入跳变沿将Timer0(加载值 - 当前值)存入此寄存器 + + __IO uint32_t HALL3V; //HALL3输入跳变沿将Timer3(加载值 - 当前值)存入此寄存器 + + uint32_t RESERVED2; + + __IO uint32_t HALLSR; //HALL输入状态 + + uint32_t RESERVED3[8]; + + __IO uint32_t EN; +} TIMRG_TypeDef; + + +#define TIMRG_HALLIE_HALL0_Pos 0 //HALL0中断使能,HALL0使用Timer0计数器 +#define TIMRG_HALLIE_HALL0_Msk (0x01 << TIMRG_HALLIE_HALL0_Pos) +#define TIMRG_HALLIE_HALL3_Pos 1 +#define TIMRG_HALLIE_HALL3_Msk (0x01 << TIMRG_HALLIE_HALL3_Pos) + +#define TIMRG_HALLIF_H0IN0_Pos 0 //HALL0输入信号0触发中断标志 +#define TIMRG_HALLIF_H0IN0_Msk (0x01 << TIMRG_HALLIF_H0IN0_Pos) +#define TIMRG_HALLIF_H0IN1_Pos 1 +#define TIMRG_HALLIF_H0IN1_Msk (0x01 << TIMRG_HALLIF_H0IN1_Pos) +#define TIMRG_HALLIF_H0IN2_Pos 2 +#define TIMRG_HALLIF_H0IN2_Msk (0x01 << TIMRG_HALLIF_H0IN2_Pos) +#define TIMRG_HALLIF_H3IN0_Pos 3 //HALL3输入信号0触发中断标志 +#define TIMRG_HALLIF_H3IN0_Msk (0x01 << TIMRG_HALLIF_H3IN0_Pos) +#define TIMRG_HALLIF_H3IN1_Pos 4 +#define TIMRG_HALLIF_H3IN1_Msk (0x01 << TIMRG_HALLIF_H3IN1_Pos) +#define TIMRG_HALLIF_H3IN2_Pos 5 +#define TIMRG_HALLIF_H3IN2_Msk (0x01 << TIMRG_HALLIF_H3IN2_Pos) + +#define TIMRG_HALLEN_HALL0_Pos 0 //HALL0功能开关,HALL0使用Timer0计数器 +#define TIMRG_HALLEN_HALL0_Msk (0x01 << TIMRG_HALLEN_HALL0_Pos) +#define TIMRG_HALLEN_HALL3_Pos 1 +#define TIMRG_HALLEN_HALL3_Msk (0x01 << TIMRG_HALLEN_HALL3_Pos) + +#define TIMRG_HALLSR_H0IN0_Pos 0 //HALL0输入信号0当前状态 +#define TIMRG_HALLSR_H0IN0_Msk (0x01 << TIMRG_HALLSR_H0IN0_Pos) +#define TIMRG_HALLSR_H0IN1_Pos 1 +#define TIMRG_HALLSR_H0IN1_Msk (0x01 << TIMRG_HALLSR_H0IN1_Pos) +#define TIMRG_HALLSR_H0IN2_Pos 2 +#define TIMRG_HALLSR_H0IN2_Msk (0x01 << TIMRG_HALLSR_H0IN2_Pos) +#define TIMRG_HALLSR_H3IN0_Pos 3 //HALL3输入信号0当前状态 +#define TIMRG_HALLSR_H3IN0_Msk (0x01 << TIMRG_HALLSR_H3IN0_Pos) +#define TIMRG_HALLSR_H3IN1_Pos 4 +#define TIMRG_HALLSR_H3IN1_Msk (0x01 << TIMRG_HALLSR_H3IN1_Pos) +#define TIMRG_HALLSR_H3IN2_Pos 5 +#define TIMRG_HALLSR_H3IN2_Msk (0x01 << TIMRG_HALLSR_H3IN2_Pos) + +#define TIMRG_EN_TIMR0_Pos 0 +#define TIMRG_EN_TIMR0_Msk (0x01 << TIMRG_EN_TIMR0_Pos) +#define TIMRG_EN_TIMR1_Pos 1 +#define TIMRG_EN_TIMR1_Msk (0x01 << TIMRG_EN_TIMR1_Pos) +#define TIMRG_EN_TIMR2_Pos 2 +#define TIMRG_EN_TIMR2_Msk (0x01 << TIMRG_EN_TIMR2_Pos) +#define TIMRG_EN_TIMR3_Pos 3 +#define TIMRG_EN_TIMR3_Msk (0x01 << TIMRG_EN_TIMR3_Pos) +#define TIMRG_EN_TIMR4_Pos 4 +#define TIMRG_EN_TIMR4_Msk (0x01 << TIMRG_EN_TIMR4_Pos) +#define TIMRG_EN_TIMR5_Pos 5 +#define TIMRG_EN_TIMR5_Msk (0x01 << TIMRG_EN_TIMR5_Pos) +#define TIMRG_EN_TIMR6_Pos 6 +#define TIMRG_EN_TIMR6_Msk (0x01 << TIMRG_EN_TIMR6_Pos) +#define TIMRG_EN_TIMR7_Pos 7 +#define TIMRG_EN_TIMR7_Msk (0x01 << TIMRG_EN_TIMR7_Pos) +#define TIMRG_EN_TIMR8_Pos 8 +#define TIMRG_EN_TIMR8_Msk (0x01 << TIMRG_EN_TIMR8_Pos) +#define TIMRG_EN_TIMR9_Pos 9 +#define TIMRG_EN_TIMR9_Msk (0x01 << TIMRG_EN_TIMR9_Pos) +#define TIMRG_EN_TIMR10_Pos 10 +#define TIMRG_EN_TIMR10_Msk (0x01 << TIMRG_EN_TIMR10_Pos) +#define TIMRG_EN_TIMR11_Pos 11 +#define TIMRG_EN_TIMR11_Msk (0x01 << TIMRG_EN_TIMR11_Pos) + + + + +typedef struct { + __IO uint32_t DATA; + + __IO uint32_t CTRL; + + __IO uint32_t BAUD; + + __IO uint32_t FIFO; + + __IO uint32_t LINCR; + + union { + __IO uint32_t CTSCR; + + __IO uint32_t RTSCR; + }; + + __IO uint32_t CFG; + + __IO uint32_t TOCR; //Timeout Control Register +} UART_TypeDef; + + +#define UART_DATA_DATA_Pos 0 +#define UART_DATA_DATA_Msk (0x1FF << UART_DATA_DATA_Pos) +#define UART_DATA_VALID_Pos 9 //当DATA字段有有效的接收数据时,该位硬件置1,读取数据后自动清零 +#define UART_DATA_VALID_Msk (0x01 << UART_DATA_VALID_Pos) +#define UART_DATA_PAERR_Pos 10 //Parity Error +#define UART_DATA_PAERR_Msk (0x01 << UART_DATA_PAERR_Pos) + +#define UART_CTRL_TXIDLE_Pos 0 //TX IDLE: 0 正在发送数据 1 空闲状态,没有数据发送 +#define UART_CTRL_TXIDLE_Msk (0x01 << UART_CTRL_TXIDLE_Pos) +#define UART_CTRL_TXFF_Pos 1 //TX FIFO Full +#define UART_CTRL_TXFF_Msk (0x01 << UART_CTRL_TXFF_Pos) +#define UART_CTRL_TXIE_Pos 2 //TX 中断使能: 1 TX FF 中数据少于设定个数时产生中断 +#define UART_CTRL_TXIE_Msk (0x01 << UART_CTRL_TXIE_Pos) +#define UART_CTRL_RXNE_Pos 3 //RX FIFO Not Empty +#define UART_CTRL_RXNE_Msk (0x01 << UART_CTRL_RXNE_Pos) +#define UART_CTRL_RXIE_Pos 4 //RX 中断使能: 1 RX FF 中数据达到设定个数时产生中断 +#define UART_CTRL_RXIE_Msk (0x01 << UART_CTRL_RXIE_Pos) +#define UART_CTRL_RXOV_Pos 5 //RX FIFO Overflow,写1清零 +#define UART_CTRL_RXOV_Msk (0x01 << UART_CTRL_RXOV_Pos) +#define UART_CTRL_TXDOIE_Pos 6 //TX Done 中断使能,发送FIFO空且发送发送移位寄存器已将最后一位发送出去 +#define UART_CTRL_TXDOIE_Msk (0x01 << UART_CTRL_TXDOIE_Pos) +#define UART_CTRL_EN_Pos 9 +#define UART_CTRL_EN_Msk (0x01 << UART_CTRL_EN_Pos) +#define UART_CTRL_LOOP_Pos 10 +#define UART_CTRL_LOOP_Msk (0x01 << UART_CTRL_LOOP_Pos) +#define UART_CTRL_TOIE_Pos 14 //TimeOut 中断使能,接收到上个字符后,超过 TOTIME/BAUDRAUD 秒没有接收到新的数据 +#define UART_CTRL_TOIE_Msk (0x01 << UART_CTRL_TOIE_Pos) +#define UART_CTRL_DATA9b_Pos 18 //1 9位数据位 0 8位数据位 +#define UART_CTRL_DATA9b_Msk (0x01 << UART_CTRL_DATA9b_Pos) +#define UART_CTRL_PARITY_Pos 19 //000 无校验 001 奇校验 011 偶校验 101 固定为1 111 固定为0 +#define UART_CTRL_PARITY_Msk (0x07 << UART_CTRL_PARITY_Pos) +#define UART_CTRL_STOP2b_Pos 22 //1 2位停止位 0 1位停止位 +#define UART_CTRL_STOP2b_Msk (0x03 << UART_CTRL_STOP2b_Pos) + +#define UART_BAUD_BAUD_Pos 0 //串口波特率 = SYS_Freq/16/BAUD - 1 +#define UART_BAUD_BAUD_Msk (0x3FFF << UART_BAUD_BAUD_Pos) +#define UART_BAUD_TXD_Pos 14 //通过此位可直接读取串口TXD引脚上的电平 +#define UART_BAUD_TXD_Msk (0x01 << UART_BAUD_TXD_Pos) +#define UART_BAUD_RXD_Pos 15 //通过此位可直接读取串口RXD引脚上的电平 +#define UART_BAUD_RXD_Msk (0x01 << UART_BAUD_RXD_Pos) +#define UART_BAUD_RXTOIF_Pos 16 //接收&超时的中断标志 = RXIF | TOIF +#define UART_BAUD_RXTOIF_Msk (0x01 << UART_BAUD_RXTOIF_Pos) +#define UART_BAUD_TXIF_Pos 17 //发送中断标志 = TXTHRF & TXIE +#define UART_BAUD_TXIF_Msk (0x01 << UART_BAUD_TXIF_Pos) +#define UART_BAUD_RXTHRF_Pos 19 //RX FIFO Threshold Flag,RX FIFO中数据达到设定个数(RXLVL > RXTHR)时硬件置1 +#define UART_BAUD_RXTHRF_Msk (0x01 << UART_BAUD_RXTHRF_Pos) +#define UART_BAUD_TXTHRF_Pos 20 //TX FIFO Threshold Flag,TX FIFO中数据少于设定个数(TXLVL <= TXTHR)时硬件置1 +#define UART_BAUD_TXTHRF_Msk (0x01 << UART_BAUD_TXTHRF_Pos) +#define UART_BAUD_TOIF_Pos 21 //TimeOut 中断标志,超过 TOTIME/BAUDRAUD 秒没有接收到新的数据时若TOIE=1,此位由硬件置位 +#define UART_BAUD_TOIF_Msk (0x01 << UART_BAUD_TOIF_Pos) +#define UART_BAUD_RXIF_Pos 22 //接收中断标志 = RXTHRF & RXIE +#define UART_BAUD_RXIF_Msk (0x01 << UART_BAUD_RXIF_Pos) +#define UART_BAUD_ABREN_Pos 23 //Auto Baudrate Enable,写1启动自动波特率校准,完成后自动清零 +#define UART_BAUD_ABREN_Msk (0x01 << UART_BAUD_ABREN_Pos) +#define UART_BAUD_ABRBIT_Pos 24 //Auto Baudrate Bit,用于计算波特率的检测位长,0 1位,通过测起始位 脉宽计算波特率,要求发送端发送0xFF + // 1 2位,通过测起始位加1位数据位脉宽计算波特率,要求发送端发送0xFE + // 1 4位,通过测起始位加3位数据位脉宽计算波特率,要求发送端发送0xF8 + // 1 8位,通过测起始位加7位数据位脉宽计算波特率,要求发送端发送0x80 +#define UART_BAUD_ABRBIT_Msk (0x03 << UART_BAUD_ABRBIT_Pos) +#define UART_BAUD_ABRERR_Pos 26 //Auto Baudrate Error,0 自动波特率校准成功 1 自动波特率校准失败 +#define UART_BAUD_ABRERR_Msk (0x01 << UART_BAUD_ABRERR_Pos) +#define UART_BAUD_TXDOIF_Pos 27 //TX Done 中断标志,发送FIFO空且发送发送移位寄存器已将最后一位发送出去 +#define UART_BAUD_TXDOIF_Msk (0x01 << UART_BAUD_TXDOIF_Pos) +#define UART_BAUD_FRAC_Pos 28 //波特率分频值小数部分 +#define UART_BAUD_FRAC_Msk (0x0Fu << UART_BAUD_FRAC_Pos) + +#define UART_FIFO_RXLVL_Pos 0 //RX FIFO Level,RX FIFO 中字符个数 +#define UART_FIFO_RXLVL_Msk (0xFF << UART_FIFO_RXLVL_Pos) +#define UART_FIFO_TXLVL_Pos 8 //TX FIFO Level,TX FIFO 中字符个数 +#define UART_FIFO_TXLVL_Msk (0xFF << UART_FIFO_TXLVL_Pos) +#define UART_FIFO_RXTHR_Pos 16 //RX FIFO Threshold,RX中断触发门限,中断使能时 RXLVL > RXTHR 触发RX中断 +#define UART_FIFO_RXTHR_Msk (0xFF << UART_FIFO_RXTHR_Pos) +#define UART_FIFO_TXTHR_Pos 24 //TX FIFO Threshold,TX中断触发门限,中断使能时 TXLVL <= TXTHR 触发TX中断 +#define UART_FIFO_TXTHR_Msk (0xFFu<< UART_FIFO_TXTHR_Pos) + +#define UART_LINCR_BRKDETIE_Pos 0 //检测到LIN Break中断使能 +#define UART_LINCR_BRKDETIE_Msk (0x01 << UART_LINCR_BRKDETIE_Pos) +#define UART_LINCR_BRKDETIF_Pos 1 //检测到LIN Break中断状态 +#define UART_LINCR_BRKDETIF_Msk (0x01 << UART_LINCR_BRKDETIF_Pos) +#define UART_LINCR_GENBRKIE_Pos 2 //发送LIN Break完成中断使能 +#define UART_LINCR_GENBRKIE_Msk (0x01 << UART_LINCR_GENBRKIE_Pos) +#define UART_LINCR_GENBRKIF_Pos 3 //发送LIN Break完成中断状态 +#define UART_LINCR_GENBRKIF_Msk (0x01 << UART_LINCR_GENBRKIF_Pos) +#define UART_LINCR_GENBRK_Pos 4 //发送LIN Break,发送完成自动清零 +#define UART_LINCR_GENBRK_Msk (0x01 << UART_LINCR_GENBRK_Pos) + +#define UART_CTSCR_EN_Pos 0 //CTS流控使能 +#define UART_CTSCR_EN_Msk (0x01 << UART_CTSCR_EN_Pos) +#define UART_CTSCR_POL_Pos 2 //CTS信号极性,0 低有效,CTS输入为低表示可以发送数据 +#define UART_CTSCR_POL_Msk (0x01 << UART_CTSCR_POL_Pos) +#define UART_CTSCR_STAT_Pos 7 //CTS信号的当前状态 +#define UART_CTSCR_STAT_Msk (0x01 << UART_CTSCR_STAT_Pos) + +#define UART_RTSCR_EN_Pos 1 //RTS流控使能 +#define UART_RTSCR_EN_Msk (0x01 << UART_RTSCR_EN_Pos) +#define UART_RTSCR_POL_Pos 3 //RTS信号极性 0 低有效,RTS输入为低表示可以接收数据 +#define UART_RTSCR_POL_Msk (0x01 << UART_RTSCR_POL_Pos) +#define UART_RTSCR_THR_Pos 4 //RTS流控的触发阈值 0 1字节 1 2字节 2 4字节 3 6字节 +#define UART_RTSCR_THR_Msk (0x07 << UART_RTSCR_THR_Pos) +#define UART_RTSCR_STAT_Pos 8 //RTS信号的当前状态 +#define UART_RTSCR_STAT_Msk (0x01 << UART_RTSCR_STAT_Pos) + +#define UART_CFG_RXEN_Pos 0 //RX Enable +#define UART_CFG_RXEN_Msk (0x01 << UART_CFG_RXEN_Pos) +#define UART_CFG_MSBF_Pos 1 //接收发送MSB First +#define UART_CFG_MSBF_Msk (0x01 << UART_CFG_MSBF_Pos) +#define UART_CFG_BRKTXLEN_Pos 2 //1表示1bit,以此类推,默认值13 +#define UART_CFG_BRKTXLEN_Msk (0x0F << UART_CFG_BRKTXLEN_Pos) +#define UART_CFG_BRKRXLEN_Pos 6 //0表示1bit,以此类推,默认值12 +#define UART_CFG_BRKRXLEN_Msk (0x0F << UART_CFG_BRKRXLEN_Pos) +#define UART_CFG_RXINV_Pos 10 //接收电平翻转 +#define UART_CFG_RXINV_Msk (0x01 << UART_CFG_RXINV_Pos) +#define UART_CFG_TXINV_Pos 11 //发送电平翻转 +#define UART_CFG_TXINV_Msk (0x01 << UART_CFG_TXINV_Pos) + +#define UART_TOCR_TIME_Pos 0 //超时时间长度,单位为 10/BAUDRATE 秒 +#define UART_TOCR_TIME_Msk (0xFFF<< UART_TOCR_TIME_Pos) +#define UART_TOCR_MODE_Pos 12 //0 只有当FIFO中有数时才触发超时中断 1 即使FIFO中没有数也可触发超时中断 +#define UART_TOCR_MODE_Msk (0x01 << UART_TOCR_MODE_Pos) +#define UART_TOCR_IFCLR_Pos 13 //TO Interrupt Flag Clear,写1清除超时中断标志 +#define UART_TOCR_IFCLR_Msk (0x01 << UART_TOCR_IFCLR_Pos) + + + + +typedef struct { + __IO uint32_t CTRL; + + __IO uint32_t DATA; + + __IO uint32_t STAT; + + __IO uint32_t IE; + + __IO uint32_t IF; + + __IO uint32_t I2SCR; + + __IO uint32_t I2SPR; +} SPI_TypeDef; + + +#define SPI_CTRL_CLKDIV_Pos 0 //Clock Divider, SPI工作时钟 = SYS_Freq/pow(2, CLKDIV+2) +#define SPI_CTRL_CLKDIV_Msk (0x07 << SPI_CTRL_CLKDIV_Pos) +#define SPI_CTRL_EN_Pos 3 +#define SPI_CTRL_EN_Msk (0x01 << SPI_CTRL_EN_Pos) +#define SPI_CTRL_SIZE_Pos 4 //Data Size Select, 取值3--15,表示4--16位 +#define SPI_CTRL_SIZE_Msk (0x0F << SPI_CTRL_SIZE_Pos) +#define SPI_CTRL_CPHA_Pos 8 //0 在SCLK的第一个跳变沿采样数据 1 在SCLK的第二个跳变沿采样数据 +#define SPI_CTRL_CPHA_Msk (0x01 << SPI_CTRL_CPHA_Pos) +#define SPI_CTRL_CPOL_Pos 9 //0 空闲状态下SCLK为低电平 1 空闲状态下SCLK为高电平 +#define SPI_CTRL_CPOL_Msk (0x01 << SPI_CTRL_CPOL_Pos) +#define SPI_CTRL_FFS_Pos 10 //Frame Format Select, 0 SPI 1 TI SSI 2 I2S 3 SPI Flash +#define SPI_CTRL_FFS_Msk (0x03 << SPI_CTRL_FFS_Pos) +#define SPI_CTRL_MSTR_Pos 12 //Master, 1 主模式 0 从模式 +#define SPI_CTRL_MSTR_Msk (0x01 << SPI_CTRL_MSTR_Pos) +#define SPI_CTRL_FAST_Pos 13 //1 SPI工作时钟 = SYS_Freq/2 0 SPI工作时钟由SPI->CTRL.CLKDIV设置 +#define SPI_CTRL_FAST_Msk (0x01 << SPI_CTRL_FAST_Pos) +#define SPI_CTRL_DMATXEN_Pos 14 //1 通过DMA写FIFO 0 通过MCU写FIFO +#define SPI_CTRL_DMATXEN_Msk (0x01 << SPI_CTRL_DMATXEN_Pos) +#define SPI_CTRL_DMARXEN_Pos 15 //1 通过DMA读FIFO 0 通过MCU读FIFO +#define SPI_CTRL_DMARXEN_Msk (0x01 << SPI_CTRL_DMARXEN_Pos) +#define SPI_CTRL_FILTE_Pos 16 //1 对SPI输入信号进行去抖操作 0 对SPI输入信号不进行去抖操作 +#define SPI_CTRL_FILTE_Msk (0x01 << SPI_CTRL_FILTE_Pos) +#define SPI_CTRL_SSN_H_Pos 17 //0 传输过程中SSN始终为0 1 传输过程中每字符之间会将SSN拉高半个SCLK周期 +#define SPI_CTRL_SSN_H_Msk (0x01 << SPI_CTRL_SSN_H_Pos) +#define SPI_CTRL_RFTHR_Pos 18 //RX FIFO Threshold,0 接收FIFO中至少有1个数据 ... 7 接收FIFO中至少有8个数据 +#define SPI_CTRL_RFTHR_Msk (0x07 << SPI_CTRL_RFTHR_Pos) +#define SPI_CTRL_TFTHR_Pos 21 //TX FIFO Threshold,0 发送FIFO中至多有0个数据 ... 7 发送FIFO中至多有7个数据 +#define SPI_CTRL_TFTHR_Msk (0x07 << SPI_CTRL_TFTHR_Pos) +#define SPI_CTRL_RFCLR_Pos 24 //RX FIFO Clear +#define SPI_CTRL_RFCLR_Msk (0x01 << SPI_CTRL_RFCLR_Pos) +#define SPI_CTRL_TFCLR_Pos 25 //TX FIFO Clear +#define SPI_CTRL_TFCLR_Msk (0x01 << SPI_CTRL_TFCLR_Pos) +#define SPI_CTRL_LSBF_Pos 28 //LSB Fisrt +#define SPI_CTRL_LSBF_Msk (0x01 << SPI_CTRL_LSBF_Pos) +#define SPI_CTRL_NSYNC_Pos 29 //1 对SPI输入信号进行采样同步 0 对SPI输入信号不进行采样同步 +#define SPI_CTRL_NSYNC_Msk (0x01 << SPI_CTRL_NSYNC_Pos) + +#define SPI_STAT_WTC_Pos 0 //Word Transmit Complete,每传输完成一个数据字由硬件置1,软件写1清零 +#define SPI_STAT_WTC_Msk (0x01 << SPI_STAT_WTC_Pos) +#define SPI_STAT_TFE_Pos 1 //发送FIFO Empty +#define SPI_STAT_TFE_Msk (0x01 << SPI_STAT_TFE_Pos) +#define SPI_STAT_TFNF_Pos 2 //发送FIFO Not Full +#define SPI_STAT_TFNF_Msk (0x01 << SPI_STAT_TFNF_Pos) +#define SPI_STAT_RFNE_Pos 3 //接收FIFO Not Empty +#define SPI_STAT_RFNE_Msk (0x01 << SPI_STAT_RFNE_Pos) +#define SPI_STAT_RFF_Pos 4 //接收FIFO Full +#define SPI_STAT_RFF_Msk (0x01 << SPI_STAT_RFF_Pos) +#define SPI_STAT_RFOV_Pos 5 //接收FIFO Overflow +#define SPI_STAT_RFOV_Msk (0x01 << SPI_STAT_RFOV_Pos) +#define SPI_STAT_TFLVL_Pos 6 //发送FIFO中数据个数, 0 TFNF=0时表示FIFO内有8个数据,TFNF=1时表示FIFO内有0个数据 1--7 FIFO内有1--7个数据 +#define SPI_STAT_TFLVL_Msk (0x07 << SPI_STAT_TFLVL_Pos) +#define SPI_STAT_RFLVL_Pos 9 //接收FIFO中数据个数, 0 RFF =1时表示FIFO内有8个数据,RFF =0时表示FIFO内有0个数据 1--7 FIFO内有1--7个数据 +#define SPI_STAT_RFLVL_Msk (0x07 << SPI_STAT_RFLVL_Pos) +#define SPI_STAT_BUSY_Pos 15 +#define SPI_STAT_BUSY_Msk (0x01 << SPI_STAT_BUSY_Pos) + +#define SPI_IE_RFOV_Pos 0 +#define SPI_IE_RFOV_Msk (0x01 << SPI_IE_RFOV_Pos) +#define SPI_IE_RFF_Pos 1 +#define SPI_IE_RFF_Msk (0x01 << SPI_IE_RFF_Pos) +#define SPI_IE_RFHF_Pos 2 +#define SPI_IE_RFHF_Msk (0x01 << SPI_IE_RFHF_Pos) +#define SPI_IE_TFE_Pos 3 +#define SPI_IE_TFE_Msk (0x01 << SPI_IE_TFE_Pos) +#define SPI_IE_TFHF_Pos 4 //发送FIFO中数据个数大于4 +#define SPI_IE_TFHF_Msk (0x01 << SPI_IE_TFHF_Pos) +#define SPI_IE_RFTHR_Pos 5 //接收FIFO中数据个数大于CTRL.RFTHR设定值中断使能 +#define SPI_IE_RFTHR_Msk (0x01 << SPI_IE_RFTHR_Pos) +#define SPI_IE_TFTHR_Pos 6 //发送FIFO中数据个数小于CTRL.TFTHR设定值中断使能 +#define SPI_IE_TFTHR_Msk (0x01 << SPI_IE_TFTHR_Pos) +#define SPI_IE_WTC_Pos 8 //Word Transmit Complete +#define SPI_IE_WTC_Msk (0x01 << SPI_IE_WTC_Pos) +#define SPI_IE_FTC_Pos 9 //Frame Transmit Complete +#define SPI_IE_FTC_Msk (0x01 << SPI_IE_FTC_Pos) +#define SPI_IE_SSFALL_Pos 10 //Slave Select Fall Edge +#define SPI_IE_SSFALL_Msk (0x01 << SPI_IE_SSFALL_Pos) +#define SPI_IE_SSRISE_Pos 11 //Slave Select Rise Edge +#define SPI_IE_SSRISE_Msk (0x01 << SPI_IE_SSRISE_Pos) + +#define SPI_IF_RFOV_Pos 0 //写1清零 +#define SPI_IF_RFOV_Msk (0x01 << SPI_IF_RFOV_Pos) +#define SPI_IF_RFF_Pos 1 //写1清零 +#define SPI_IF_RFF_Msk (0x01 << SPI_IF_RFF_Pos) +#define SPI_IF_RFHF_Pos 2 //写1清零 +#define SPI_IF_RFHF_Msk (0x01 << SPI_IF_RFHF_Pos) +#define SPI_IF_TFE_Pos 3 //写1清零 +#define SPI_IF_TFE_Msk (0x01 << SPI_IF_TFE_Pos) +#define SPI_IF_TFHF_Pos 4 //写1清零 +#define SPI_IF_TFHF_Msk (0x01 << SPI_IF_TFHF_Pos) +#define SPI_IF_RFTHR_Pos 5 //写1清零 +#define SPI_IF_RFTHR_Msk (0x01 << SPI_IF_RFTHR_Pos) +#define SPI_IF_TFTHR_Pos 6 //写1清零 +#define SPI_IF_TFTHR_Msk (0x01 << SPI_IF_TFTHR_Pos) +#define SPI_IF_WTC_Pos 8 //Word Transmit Complete,每传输完成一个数据字由硬件置1 +#define SPI_IF_WTC_Msk (0x01 << SPI_IF_WTC_Pos) +#define SPI_IF_FTC_Pos 9 //Frame Transmit Complete,WTC置位时若TX FIFO是空的,则FTC置位 +#define SPI_IF_FTC_Msk (0x01 << SPI_IF_FTC_Pos) +#define SPI_IF_SSFALL_Pos 10 +#define SPI_IF_SSFALL_Msk (0x01 << SPI_IF_SSFALL_Pos) +#define SPI_IF_SSRISE_Pos 11 +#define SPI_IF_SSRISE_Msk (0x01 << SPI_IF_SSRISE_Pos) + +#define SPI_I2SCR_DIEN_Pos 0 //Data Input Enable +#define SPI_I2SCR_DIEN_Msk (0x01 << SPI_I2SCR_DIEN_Pos) +#define SPI_I2SCR_DOEN_Pos 1 //Data Output Enable +#define SPI_I2SCR_DOEN_Msk (0x01 << SPI_I2SCR_DOEN_Pos) +#define SPI_I2SCR_MSTR_Pos 2 //Master Mode +#define SPI_I2SCR_MSTR_Msk (0x01 << SPI_I2SCR_MSTR_Pos) +#define SPI_I2SCR_EN_Pos 3 +#define SPI_I2SCR_EN_Msk (0x01 << SPI_I2SCR_EN_Pos) +#define SPI_I2SCR_FFMT_Pos 4 //I2S Frame Format, 0 I2S philips 1 MSB justified 2 PCM Short 3 PCM Long +#define SPI_I2SCR_FFMT_Msk (0x03 << SPI_I2SCR_FFMT_Pos) +#define SPI_I2SCR_DLEN_Pos 6 //I2S Data Length, 0 8位 1 16位 2 24位 3 32位 +#define SPI_I2SCR_DLEN_Msk (0x03 << SPI_I2SCR_DLEN_Pos) +#define SPI_I2SCR_PCMSYNW_Pos 8 //I2S PCM Long Mode Sync Width, 0 1 SCLK period 1 1 Data Length +#define SPI_I2SCR_PCMSYNW_Msk (0x01 << SPI_I2SCR_PCMSYNW_Pos) +#define SPI_I2SCR_MCLKOE_Pos 9 //MCLK Output Enable +#define SPI_I2SCR_MCLKOE_Msk (0x01 << SPI_I2SCR_MCLKOE_Pos) +#define SPI_I2SCR_CHLEN_Pos 10 //声道宽度,0 16位 1 32位 +#define SPI_I2SCR_CHLEN_Msk (0x01 << SPI_I2SCR_CHLEN_Pos) +#define SPI_I2SCR_CHRIGHT_Pos 16 //1 Right Channel 0 Left Channel +#define SPI_I2SCR_CHRIGHT_Msk (0x01 << SPI_I2SCR_CHRIGHT_Pos) + +#define SPI_I2SPR_MCLKDIV_Pos 0 //Fmclk = Fpclk / (2 * (MCLKDIV + 1)),MCLK一般是SCLK的256或384倍 +#define SPI_I2SPR_MCLKDIV_Msk (0x3F << SPI_I2SPR_MCLKDIV_Pos) +#define SPI_I2SPR_SCLKDIV_Pos 8 //Fsclk = Fpclk / (2 * (SCLKDIV + 1)) +#define SPI_I2SPR_SCLKDIV_Msk (0xFFF<< SPI_I2SPR_SCLKDIV_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __IO uint32_t SR; + + __IO uint32_t TR; //Transfer Register + + __IO uint32_t RXDATA; + + __IO uint32_t TXDATA; + + __IO uint32_t IF; + + __IO uint32_t IE; + + uint32_t RESERVED1; + + __IO uint32_t MCR; //Master Control Register + + __IO uint32_t CLK; + + uint32_t RESERVED2[2]; + + __IO uint32_t SCR; //Slave Control Register + + __IO uint32_t SADDR; +} I2C_TypeDef; + + +#define I2C_CR_EN_Pos 0 +#define I2C_CR_EN_Msk (0x01 << I2C_CR_EN_Pos) +#define I2C_CR_MASTER_Pos 1 //1 Master 0 Slave +#define I2C_CR_MASTER_Msk (0x01 << I2C_CR_MASTER_Pos) +#define I2C_CR_HS_Pos 2 //1 High-Speed mode 0 Standard-mode or Fast-mode +#define I2C_CR_HS_Msk (0x01 << I2C_CR_HS_Pos) +#define I2C_CR_DNF_Pos 3 //Digital Noise Filter, 宽度低于 DNF+1 个的电平被认为是毛刺 +#define I2C_CR_DNF_Msk (0x0F << I2C_CR_DNF_Pos) + +#define I2C_SR_BUSY_Pos 0 +#define I2C_SR_BUSY_Msk (0x01 << I2C_SR_BUSY_Pos) +#define I2C_SR_SCL_Pos 1 //SCL Line Level +#define I2C_SR_SCL_Msk (0x01 << I2C_SR_SCL_Pos) +#define I2C_SR_SDA_Pos 2 //SDA Line Level +#define I2C_SR_SDA_Msk (0x01 << I2C_SR_SDA_Pos) + +#define I2C_TR_TXACK_Pos 0 //作为接收时,反馈ACK位的电平值 +#define I2C_TR_TXACK_Msk (0x01 << I2C_TR_TXACK_Pos) +#define I2C_TR_RXACK_Pos 1 //作为发送时,接收到的ACK位电平值 +#define I2C_TR_RXACK_Msk (0x01 << I2C_TR_RXACK_Pos) +#define I2C_TR_TXCLR_Pos 2 //TX Data Clear, 自动清零 +#define I2C_TR_TXCLR_Msk (0x01 << I2C_TR_TXCLR_Pos) +#define I2C_TR_SLVACT_Pos 8 //Slave Active, 从机模式下被选中时置位 +#define I2C_TR_SLVACT_Msk (0x01 << I2C_TR_SLVACT_Pos) +#define I2C_TR_SLVRD_Pos 9 //Slave Read mode,从机模式下接收到读请求时置位 +#define I2C_TR_SLVRD_Msk (0x01 << I2C_TR_SLVRD_Pos) +#define I2C_TR_SLVWR_Pos 10 //Slave Write mode,从机模式下接收到写请求时置位 +#define I2C_TR_SLVWR_Msk (0x01 << I2C_TR_SLVWR_Pos) +#define I2C_TR_SLVSTR_Pos 11 //Slave clock stretching +#define I2C_TR_SLVSTR_Msk (0x01 << I2C_TR_SLVSTR_Pos) +#define I2C_TR_SLVRDS_Pos 12 //Slave RXDATA Status, 0 空 1 接收到地址 2 接收到数据 3 接收到Master Code +#define I2C_TR_SLVRDS_Msk (0x03 << I2C_TR_SLVRDS_Pos) + +#define I2C_IF_TXE_Pos 0 //TX Empty,写TXDATA清零此位 +#define I2C_IF_TXE_Msk (0x01 << I2C_IF_TXE_Pos) +#define I2C_IF_RXNE_Pos 1 //RX Not Empty,读RXDATA清零此位 +#define I2C_IF_RXNE_Msk (0x01 << I2C_IF_RXNE_Pos) +#define I2C_IF_RXOV_Pos 2 //RX Overflow,写1清零 +#define I2C_IF_RXOV_Msk (0x01 << I2C_IF_RXOV_Pos) +#define I2C_IF_TXDONE_Pos 3 //TX Done,写1清零 +#define I2C_IF_TXDONE_Msk (0x01 << I2C_IF_TXDONE_Pos) +#define I2C_IF_RXDONE_Pos 4 //RX Done,写1清零 +#define I2C_IF_RXDONE_Msk (0x01 << I2C_IF_RXDONE_Pos) +#define I2C_IF_RXSTA_Pos 8 //从机接收到起始位,写1清零 +#define I2C_IF_RXSTA_Msk (0x01 << I2C_IF_RXSTA_Pos) +#define I2C_IF_RXSTO_Pos 9 //从机接收到停止位,写1清零 +#define I2C_IF_RXSTO_Msk (0x01 << I2C_IF_RXSTO_Pos) +#define I2C_IF_AL_Pos 16 //主机仲裁丢失总线,写1清零 +#define I2C_IF_AL_Msk (0x01 << I2C_IF_AL_Pos) +#define I2C_IF_MLTO_Pos 17 //Master SCL Low Timeout,写1清零 +#define I2C_IF_MLTO_Msk (0x01 << I2C_IF_MLTO_Pos) + +#define I2C_IE_TXE_Pos 0 +#define I2C_IE_TXE_Msk (0x01 << I2C_IE_TXE_Pos) +#define I2C_IE_RXNE_Pos 1 +#define I2C_IE_RXNE_Msk (0x01 << I2C_IE_RXNE_Pos) +#define I2C_IE_RXOV_Pos 2 +#define I2C_IE_RXOV_Msk (0x01 << I2C_IE_RXOV_Pos) +#define I2C_IE_TXDONE_Pos 3 +#define I2C_IE_TXDONE_Msk (0x01 << I2C_IE_TXDONE_Pos) +#define I2C_IE_RXDONE_Pos 4 +#define I2C_IE_RXDONE_Msk (0x01 << I2C_IE_RXDONE_Pos) +#define I2C_IE_RXSTA_Pos 8 +#define I2C_IE_RXSTA_Msk (0x01 << I2C_IE_RXSTA_Pos) +#define I2C_IE_RXSTO_Pos 9 +#define I2C_IE_RXSTO_Msk (0x01 << I2C_IE_RXSTO_Pos) +#define I2C_IE_AL_Pos 16 +#define I2C_IE_AL_Msk (0x01 << I2C_IE_AL_Pos) +#define I2C_IE_MLTO_Pos 17 +#define I2C_IE_MLTO_Msk (0x01 << I2C_IE_MLTO_Pos) + +#define I2C_MCR_STA_Pos 0 //写1产生起始位,完成后自动清零 +#define I2C_MCR_STA_Msk (0x01 << I2C_MCR_STA_Pos) +#define I2C_MCR_RD_Pos 1 +#define I2C_MCR_RD_Msk (0x01 << I2C_MCR_RD_Pos) +#define I2C_MCR_WR_Pos 2 +#define I2C_MCR_WR_Msk (0x01 << I2C_MCR_WR_Pos) +#define I2C_MCR_STO_Pos 3 //写1产生停止位,完成后自动清零 +#define I2C_MCR_STO_Msk (0x01 << I2C_MCR_STO_Pos) + +#define I2C_CLK_SCLL_Pos 0 //SCL Low Time +#define I2C_CLK_SCLL_Msk (0xFF << I2C_CLK_SCLL_Pos) +#define I2C_CLK_SCLH_Pos 8 //SCL High Time +#define I2C_CLK_SCLH_Msk (0xFF << I2C_CLK_SCLH_Pos) +#define I2C_CLK_DIV_Pos 16 +#define I2C_CLK_DIV_Msk (0xFF << I2C_CLK_DIV_Pos) +#define I2C_CLK_SDAH_Pos 24 //SDA Hold Time +#define I2C_CLK_SDAH_Msk (0x0F << I2C_CLK_SDAH_Pos) + +#define I2C_SCR_ADDR10_Pos 0 //1 10位地址 0 7位地址 +#define I2C_SCR_ADDR10_Msk (0x01 << I2C_SCR_ADDR10_Pos) +#define I2C_SCR_MCDE_Pos 1 //Master Code Detect Enable +#define I2C_SCR_MCDE_Msk (0x01 << I2C_SCR_MCDE_Pos) +#define I2C_SCR_STRE_Pos 2 //Clock Stretching Enable +#define I2C_SCR_STRE_Msk (0x01 << I2C_SCR_STRE_Pos) +#define I2C_SCR_ASDS_Pos 3 //Adaptive Stretching Data Setup +#define I2C_SCR_ASDS_Msk (0x01 << I2C_SCR_ASDS_Pos) + +#define I2C_SADDR_ADDR7_Pos 1 //7位地址模式下的地址 +#define I2C_SADDR_ADDR7_Msk (0x7F << I2C_SADDR_ADDR7_Pos) +#define I2C_SADDR_ADDR10_Pos 0 //10位地址模式下的地址 +#define I2C_SADDR_ADDR10_Msk (0x3FF<< I2C_SADDR_ADDR10_Pos) +#define I2C_SADDR_MASK7_Pos 17 //7位地址模式下的地址掩码,ADDR7 & (~MASK7) 后与接收地址比较 +#define I2C_SADDR_MASK7_Msk (0x7F << I2C_SADDR_MASK7_Pos) +#define I2C_SADDR_MASK10_Pos 16 //10位地址模式下的地址掩码,只掩码低8位 +#define I2C_SADDR_MASK10_Msk (0xFF << I2C_SADDR_MASK10_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __IO uint32_t GO; + + __IO uint32_t IE; + + __IO uint32_t IF; + + struct { + __IO uint32_t SR; + + __IO uint32_t DR; + + __IO uint32_t CMP; + + uint32_t RESERVED; + } SEQ[4]; + + uint32_t RESERVED[15]; + + __IO uint32_t SEQCHN0; + + __IO uint32_t SEQCHN1; //序列通道选择 + + __IO uint32_t SEQTRG; //序列触发选择 + + __IO uint32_t SEQCOV; //序列转换次数,序列被触发启动后可连续转换多次,此处指定转换次数 + + __IO uint32_t SEQSMP; //序列采样时间,采样保持时间 + + uint32_t RESERVED2[4]; + + __IO uint32_t CR2; + + uint32_t RESERVED3[15]; + + __IO uint32_t CALIB; +} ADC_TypeDef; + + +#define ADC_CR_EN_Pos 0 +#define ADC_CR_EN_Msk (0x01 << ADC_CR_EN_Pos) +#define ADC_CR_AVG_Pos 1 //0 1次采样 1 2次采样取平均值 2 4次采样取平均值 3 8次采样取平均值 +#define ADC_CR_AVG_Msk (0x03 << ADC_CR_AVG_Pos) +#define ADC_CR_RESET_Pos 3 //复位模拟模块,置位至少需两个采样周期 +#define ADC_CR_RESET_Msk (0x01 << ADC_CR_RESET_Pos) +#define ADC_CR_DMAEN_Pos 4 //四位,每位对应一个序列,同一时刻只能一个有一个序列使能DMA,0 能通过CPU读取DATA_FIFO 1 只能通过DMA读取DATA_FIFO +#define ADC_CR_DMAEN_Msk (0x0F << ADC_CR_DMAEN_Pos) +#define ADC_CR_FFCLR_Pos 8 //FIFO Clear,四位,每位对应一个序列 +#define ADC_CR_FFCLR_Msk (0x0F << ADC_CR_FFCLR_Pos) + +#define ADC_GO_SEQ0_Pos 0 //序列3转换启动位 +#define ADC_GO_SEQ0_Msk (0x01 << ADC_GO_SEQ0_Pos) +#define ADC_GO_SEQ1_Pos 1 +#define ADC_GO_SEQ1_Msk (0x01 << ADC_GO_SEQ1_Pos) +#define ADC_GO_SEQ2_Pos 2 +#define ADC_GO_SEQ2_Msk (0x01 << ADC_GO_SEQ2_Pos) +#define ADC_GO_SEQ3_Pos 3 +#define ADC_GO_SEQ3_Msk (0x01 << ADC_GO_SEQ3_Pos) +#define ADC_GO_BUSY_Pos 4 +#define ADC_GO_BUSY_Msk (0x01 << ADC_GO_BUSY_Pos) + +#define ADC_IE_SEQ0EOC_Pos 0 //序列0 End Of Convertion 中断使能 +#define ADC_IE_SEQ0EOC_Msk (0x01 << ADC_IE_SEQ0EOC_Pos) +#define ADC_IE_SEQ0OVF_Pos 1 //序列0 FIFO Overflow 中断使能 +#define ADC_IE_SEQ0OVF_Msk (0x01 << ADC_IE_SEQ0OVF_Pos) +#define ADC_IE_SEQ0HALF_Pos 2 //序列0 FIFO Half Full 中断使能 +#define ADC_IE_SEQ0HALF_Msk (0x01 << ADC_IE_SEQ0HALF_Pos) +#define ADC_IE_SEQ0FULL_Pos 3 //序列0 FIFO Full 中断使能 +#define ADC_IE_SEQ0FULL_Msk (0x01 << ADC_IE_SEQ0FULL_Pos) +#define ADC_IE_SEQ0CMPMAX_Pos 4 //序列0转换结果大于COMP.MAX中断使能 +#define ADC_IE_SEQ0CMPMAX_Msk (0x01 << ADC_IE_SEQ0CMPMAX_Pos) +#define ADC_IE_SEQ0CMPMIN_Pos 5 //序列0转换结果小于COMP.MIN中断使能 +#define ADC_IE_SEQ0CMPMIN_Msk (0x01 << ADC_IE_SEQ0CMPMIN_Pos) +#define ADC_IE_SEQ1EOC_Pos 8 +#define ADC_IE_SEQ1EOC_Msk (0x01 << ADC_IE_SEQ1EOC_Pos) +#define ADC_IE_SEQ1OVF_Pos 9 +#define ADC_IE_SEQ1OVF_Msk (0x01 << ADC_IE_SEQ1OVF_Pos) +#define ADC_IE_SEQ1HALF_Pos 10 +#define ADC_IE_SEQ1HALF_Msk (0x01 << ADC_IE_SEQ1HALF_Pos) +#define ADC_IE_SEQ1FULL_Pos 11 +#define ADC_IE_SEQ1FULL_Msk (0x01 << ADC_IE_SEQ1FULL_Pos) +#define ADC_IE_SEQ1CMPMAX_Pos 12 +#define ADC_IE_SEQ1CMPMAX_Msk (0x01 << ADC_IE_SEQ1CMPMAX_Pos) +#define ADC_IE_SEQ1CMPMIN_Pos 13 +#define ADC_IE_SEQ1CMPMIN_Msk (0x01 << ADC_IE_SEQ1CMPMIN_Pos) +#define ADC_IE_SEQ2EOC_Pos 16 +#define ADC_IE_SEQ2EOC_Msk (0x01 << ADC_IE_SEQ2EOC_Pos) +#define ADC_IE_SEQ2OVF_Pos 17 +#define ADC_IE_SEQ2OVF_Msk (0x01 << ADC_IE_SEQ2OVF_Pos) +#define ADC_IE_SEQ2HALF_Pos 18 +#define ADC_IE_SEQ2HALF_Msk (0x01 << ADC_IE_SEQ2HALF_Pos) +#define ADC_IE_SEQ2FULL_Pos 19 +#define ADC_IE_SEQ2FULL_Msk (0x01 << ADC_IE_SEQ2FULL_Pos) +#define ADC_IE_SEQ2CMPMAX_Pos 20 +#define ADC_IE_SEQ2CMPMAX_Msk (0x01 << ADC_IE_SEQ2CMPMAX_Pos) +#define ADC_IE_SEQ2CMPMIN_Pos 21 +#define ADC_IE_SEQ2CMPMIN_Msk (0x01 << ADC_IE_SEQ2CMPMIN_Pos) +#define ADC_IE_SEQ3EOC_Pos 24 +#define ADC_IE_SEQ3EOC_Msk (0x01 << ADC_IE_SEQ3EOC_Pos) +#define ADC_IE_SEQ3OVF_Pos 25 +#define ADC_IE_SEQ3OVF_Msk (0x01 << ADC_IE_SEQ3OVF_Pos) +#define ADC_IE_SEQ3HALF_Pos 26 +#define ADC_IE_SEQ3HALF_Msk (0x01 << ADC_IE_SEQ3HALF_Pos) +#define ADC_IE_SEQ3FULL_Pos 27 +#define ADC_IE_SEQ3FULL_Msk (0x01 << ADC_IE_SEQ3FULL_Pos) +#define ADC_IE_SEQ3CMPMAX_Pos 28 +#define ADC_IE_SEQ3CMPMAX_Msk (0x01 << ADC_IE_SEQ3CMPMAX_Pos) +#define ADC_IE_SEQ3CMPMIN_Pos 29 +#define ADC_IE_SEQ3CMPMIN_Msk (0x01 << ADC_IE_SEQ3CMPMIN_Pos) + +#define ADC_IF_SEQ0EOC_Pos 0 //序列0 End Of Convertion 中断标志 +#define ADC_IF_SEQ0EOC_Msk (0x01 << ADC_IF_SEQ0EOC_Pos) +#define ADC_IF_SEQ0OVF_Pos 1 //序列0 FIFO Overflow 中断标志 +#define ADC_IF_SEQ0OVF_Msk (0x01 << ADC_IF_SEQ0OVF_Pos) +#define ADC_IF_SEQ0HALF_Pos 2 //序列0 FIFO Half Full 中断标志 +#define ADC_IF_SEQ0HALF_Msk (0x01 << ADC_IF_SEQ0HALF_Pos) +#define ADC_IF_SEQ0FULL_Pos 3 //序列0 FIFO Full 中断标志 +#define ADC_IF_SEQ0FULL_Msk (0x01 << ADC_IF_SEQ0FULL_Pos) +#define ADC_IF_SEQ0CMPMAX_Pos 4 //序列0转换结果大于COMP.MAX中断标志 +#define ADC_IF_SEQ0CMPMAX_Msk (0x01 << ADC_IF_SEQ0CMPMAX_Pos) +#define ADC_IF_SEQ0CMPMIN_Pos 5 //序列0转换结果小于COMP.MIN中断标志 +#define ADC_IF_SEQ0CMPMIN_Msk (0x01 << ADC_IF_SEQ0CMPMIN_Pos) +#define ADC_IF_SEQ1EOC_Pos 8 +#define ADC_IF_SEQ1EOC_Msk (0x01 << ADC_IF_SEQ1EOC_Pos) +#define ADC_IF_SEQ1OVF_Pos 9 +#define ADC_IF_SEQ1OVF_Msk (0x01 << ADC_IF_SEQ1OVF_Pos) +#define ADC_IF_SEQ1HALF_Pos 10 +#define ADC_IF_SEQ1HALF_Msk (0x01 << ADC_IF_SEQ1HALF_Pos) +#define ADC_IF_SEQ1FULL_Pos 11 +#define ADC_IF_SEQ1FULL_Msk (0x01 << ADC_IF_SEQ1FULL_Pos) +#define ADC_IF_SEQ1CMPMAX_Pos 12 +#define ADC_IF_SEQ1CMPMAX_Msk (0x01 << ADC_IF_SEQ1CMPMAX_Pos) +#define ADC_IF_SEQ1CMPMIN_Pos 13 +#define ADC_IF_SEQ1CMPMIN_Msk (0x01 << ADC_IF_SEQ1CMPMIN_Pos) +#define ADC_IF_SEQ2EOC_Pos 16 +#define ADC_IF_SEQ2EOC_Msk (0x01 << ADC_IF_SEQ2EOC_Pos) +#define ADC_IF_SEQ2OVF_Pos 17 +#define ADC_IF_SEQ2OVF_Msk (0x01 << ADC_IF_SEQ2OVF_Pos) +#define ADC_IF_SEQ2HALF_Pos 18 +#define ADC_IF_SEQ2HALF_Msk (0x01 << ADC_IF_SEQ2HALF_Pos) +#define ADC_IF_SEQ2FULL_Pos 19 +#define ADC_IF_SEQ2FULL_Msk (0x01 << ADC_IF_SEQ2FULL_Pos) +#define ADC_IF_SEQ2CMPMAX_Pos 20 +#define ADC_IF_SEQ2CMPMAX_Msk (0x01 << ADC_IF_SEQ2CMPMAX_Pos) +#define ADC_IF_SEQ2CMPMIN_Pos 21 +#define ADC_IF_SEQ2CMPMIN_Msk (0x01 << ADC_IF_SEQ2CMPMIN_Pos) +#define ADC_IF_SEQ3EOC_Pos 24 +#define ADC_IF_SEQ3EOC_Msk (0x01 << ADC_IF_SEQ3EOC_Pos) +#define ADC_IF_SEQ3OVF_Pos 25 +#define ADC_IF_SEQ3OVF_Msk (0x01 << ADC_IF_SEQ3OVF_Pos) +#define ADC_IF_SEQ3HALF_Pos 26 +#define ADC_IF_SEQ3HALF_Msk (0x01 << ADC_IF_SEQ3HALF_Pos) +#define ADC_IF_SEQ3FULL_Pos 27 +#define ADC_IF_SEQ3FULL_Msk (0x01 << ADC_IF_SEQ3FULL_Pos) +#define ADC_IF_SEQ3CMPMAX_Pos 28 +#define ADC_IF_SEQ3CMPMAX_Msk (0x01 << ADC_IF_SEQ3CMPMAX_Pos) +#define ADC_IF_SEQ3CMPMIN_Pos 29 +#define ADC_IF_SEQ3CMPMIN_Msk (0x01 << ADC_IF_SEQ3CMPMIN_Pos) + +#define ADC_SR_EOC_Pos 0 //End Of Conversion,ADC开始转换时硬件清零 +#define ADC_SR_EOC_Msk (0x01 << ADC_SR_EOC_Pos) +#define ADC_SR_OVF_Pos 1 //FIFO Overflow +#define ADC_SR_OVF_Msk (0x01 << ADC_SR_OVF_Pos) +#define ADC_SR_HALF_Pos 2 //FIFO Half Full +#define ADC_SR_HALF_Msk (0x01 << ADC_SR_HALF_Pos) +#define ADC_SR_FULL_Pos 3 //FIFO Full +#define ADC_SR_FULL_Msk (0x01 << ADC_SR_FULL_Pos) +#define ADC_SR_EMPTY_Pos 4 //FIFO Empty +#define ADC_SR_EMPTY_Msk (0x01 << ADC_SR_EMPTY_Pos) +#define ADC_SR_LEVEL_Pos 5 //FIFO中数据个数,1~7:FIFO中有1~7个数据 0 FIFO Empty时表示0个数据,FIFO Full时表示8个数据 +#define ADC_SR_LEVEL_Msk (0x07 << ADC_SR_LEVEL_Pos) + +#define ADC_DR_VALUE_Pos 0 +#define ADC_DR_VALUE_Msk (0xFFF<< ADC_DR_VALUE_Pos) +#define ADC_DR_CHNUM_Pos 12 +#define ADC_DR_CHNUM_Msk (0x0F << ADC_DR_CHNUM_Pos) + +#define ADC_CMP_MAX_Pos 0 +#define ADC_CMP_MAX_Msk (0xFFF<< ADC_CMP_MAX_Pos) +#define ADC_CMP_MIN_Pos 16 +#define ADC_CMP_MIN_Msk (0xFFF<< ADC_CMP_MIN_Pos) + +#define ADC_SEQCHN0_SEQ0_Pos 0 //序列0通道选择,12位对应12个通道,bitx置位表示将通道x加入序列0 +#define ADC_SEQCHN0_SEQ0_Msk (0xFFF << ADC_SEQCHN0_SEQ0_Pos) +#define ADC_SEQCHN0_SEQ1_Pos 16 +#define ADC_SEQCHN0_SEQ1_Msk (0xFFF << ADC_SEQCHN0_SEQ1_Pos) + +#define ADC_SEQCHN1_SEQ2_Pos 0 +#define ADC_SEQCHN1_SEQ2_Msk (0xFFF << ADC_SEQCHN1_SEQ2_Pos) +#define ADC_SEQCHN1_SEQ3_Pos 16 +#define ADC_SEQCHN1_SEQ3_Msk (0xFFF << ADC_SEQCHN1_SEQ3_Pos) + +#define ADC_SEQTRG_SEQ0_Pos 0 //序列0触发选择,0x01 CPU 0x02 TIMR2 0x03 TIMR3 0x04-07 ADC_TRIG0-3引脚 0x10-1F PWM0A-PWM7B +#define ADC_SEQTRG_SEQ0_Msk (0x1F << ADC_SEQTRG_SEQ0_Pos) +#define ADC_SEQTRG_SEQ1_Pos 8 +#define ADC_SEQTRG_SEQ1_Msk (0x1F << ADC_SEQTRG_SEQ1_Pos) +#define ADC_SEQTRG_SEQ2_Pos 16 +#define ADC_SEQTRG_SEQ2_Msk (0x1F << ADC_SEQTRG_SEQ2_Pos) +#define ADC_SEQTRG_SEQ3_Pos 24 +#define ADC_SEQTRG_SEQ3_Msk (0x1F << ADC_SEQTRG_SEQ3_Pos) + +#define ADC_SEQCOV_SEQ0_Pos 0 //序列0转换次数,0x00 转换1次 +#define ADC_SEQCOV_SEQ0_Msk (0xFF << ADC_SEQCOV_SEQ0_Pos) +#define ADC_SEQCOV_SEQ1_Pos 8 +#define ADC_SEQCOV_SEQ1_Msk (0xFF << ADC_SEQCOV_SEQ1_Pos) +#define ADC_SEQCOV_SEQ2_Pos 16 +#define ADC_SEQCOV_SEQ2_Msk (0xFF << ADC_SEQCOV_SEQ2_Pos) +#define ADC_SEQCOV_SEQ3_Pos 24 +#define ADC_SEQCOV_SEQ3_Msk (0xFF << ADC_SEQCOV_SEQ3_Pos) + +#define ADC_SEQSMP_SEQ0_Pos 0 //序列0采样时间,0/1/2/3 采样建立时间保持1/2/4/8个采样时钟周期 +#define ADC_SEQSMP_SEQ0_Msk (0x07 << ADC_SEQSMP_SEQ0_Pos) +#define ADC_SEQSMP_SEQ1_Pos 4 +#define ADC_SEQSMP_SEQ1_Msk (0x07 << ADC_SEQSMP_SEQ1_Pos) +#define ADC_SEQSMP_SEQ2_Pos 8 +#define ADC_SEQSMP_SEQ2_Msk (0x07 << ADC_SEQSMP_SEQ2_Pos) +#define ADC_SEQSMP_SEQ3_Pos 12 +#define ADC_SEQSMP_SEQ3_Msk (0x07 << ADC_SEQSMP_SEQ3_Pos) + +#define ADC_CR2_ENLDO_Pos 2 //该信号由0变为1后,至少需要等20us才能使能ADC(将ADC_EN置为1) +#define ADC_CR2_ENLDO_Msk (0x01 << ADC_CR2_ENLDO_Pos) +#define ADC_CR2_BITS_Pos 6 //ADC位数,0 6位 1 8位 2 10位 3 12位 +#define ADC_CR2_BITS_Msk (0x03 << ADC_CR2_BITS_Pos) + +#define ADC_CALIB_RESET_Pos 0 //校准模块复位,至少保持2个采样周期 +#define ADC_CALIB_RESET_Msk (0x01 << ADC_CALIB_RESET_Pos) +#define ADC_CALIB_START_Pos 1 //写1启动校准,硬件清零 +#define ADC_CALIB_START_Msk (0x01 << ADC_CALIB_START_Pos) +#define ADC_CALIB_BUSY_Pos 2 //1 正在执行校准 +#define ADC_CALIB_BUSY_Msk (0x01 << ADC_CALIB_BUSY_Pos) +#define ADC_CALIB_LOAD_Pos 3 //写1将校准结果加载到ADC中,硬件清零 +#define ADC_CALIB_LOAD_Msk (0x01 << ADC_CALIB_LOAD_Pos) +#define ADC_CALIB_BYPASS_Pos 4 //1 旁路校准模块 +#define ADC_CALIB_BYPASS_Msk (0x01 << ADC_CALIB_BYPASS_Pos) +#define ADC_CALIB_RESULT_Pos 8 +#define ADC_CALIB_RESULT_Msk (0x7F << ADC_CALIB_RESULT_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __IO uint32_t OCR; + + __IO uint32_t BRKCR; + + __IO uint32_t BRKIN; + + uint32_t RESERVED[4]; + + __IO uint32_t PERIOD; //[15:0] 周期 + + __IO uint32_t CMPA; //[15:0] A路翻转点比较值 + + __IO uint32_t CMPB; //[15:0] B路翻转点比较值 + + __IO uint32_t DZA; //[9:0] 死区 + + __IO uint32_t DZB; + + __IO uint32_t CMPA2; //非对称中心对齐模式下,向下计数过程中,A路翻转点比较值 + + __IO uint32_t CMPB2; //非对称中心对齐模式下,向下计数过程中,B路翻转点比较值 + + uint32_t RESERVED2[5]; + + __IO uint32_t OVFTRG; + + __IO uint32_t CMPTRG; + + uint32_t RESERVED3[2]; + + __IO uint32_t EVMUX; + + __IO uint32_t EVMSK; + + uint32_t RESERVED4[2]; + + __IO uint32_t IE; + + __IO uint32_t IF; + + __IO uint32_t VALUE; + + __IO uint32_t SR; +} PWM_TypeDef; + + +#define PWM_CR_MODE_Pos 0 //0 边沿对齐模式 1 中心对齐模式 2 非对称中心对齐模式 +#define PWM_CR_MODE_Msk (0x03 << PWM_CR_MODE_Pos) +#define PWM_CR_MULT_Pos 2 //0 单次计数模式 1 多次计数模式 +#define PWM_CR_MULT_Msk (0x01 << PWM_CR_MULT_Pos) +#define PWM_CR_DIR_Pos 3 //计数器计数方向, 0 向上计数 1 向下计数 +#define PWM_CR_DIR_Msk (0x01 << PWM_CR_DIR_Pos) +#define PWM_CR_CLKSRC_Pos 4 //计数时钟源,0 系统时钟 1 PWM_PULSE0输入 2 PWM_PULSE1输入 +#define PWM_CR_CLKSRC_Msk (0x03 << PWM_CR_CLKSRC_Pos) +#define PWM_CR_CLKDIV_Pos 6 //计数时钟预分频, 0 1分频 1 2分频 ... 1023 1024分频 +#define PWM_CR_CLKDIV_Msk (0x3FF<< PWM_CR_CLKDIV_Pos) +#define PWM_CR_RPTNUM_Pos 16 //计数器溢出多少次执行一次寄存器重载,0 1次 1 2次 ... 255 256次 +#define PWM_CR_RPTNUM_Msk (0xFF << PWM_CR_RPTNUM_Pos) + +#define PWM_OCR_IDLEA_Pos 0 //A路空闲时输出电平 +#define PWM_OCR_IDLEA_Msk (0x01 << PWM_OCR_IDLEA_Pos) +#define PWM_OCR_IDLEB_Pos 1 //B路空闲时输出电平 +#define PWM_OCR_IDLEB_Msk (0x01 << PWM_OCR_IDLEB_Pos) +#define PWM_OCR_IDLEAN_Pos 2 //AN路空闲时输出电平 +#define PWM_OCR_IDLEAN_Msk (0x01 << PWM_OCR_IDLEAN_Pos) +#define PWM_OCR_IDLEBN_Pos 3 //BN路空闲时输出电平 +#define PWM_OCR_IDLEBN_Msk (0x01 << PWM_OCR_IDLEBN_Pos) +#define PWM_OCR_INVA_Pos 4 //A路输出是否取反 +#define PWM_OCR_INVA_Msk (0x01 << PWM_OCR_INVA_Pos) +#define PWM_OCR_INVB_Pos 5 //B路输出是否取反 +#define PWM_OCR_INVB_Msk (0x01 << PWM_OCR_INVB_Pos) +#define PWM_OCR_INVAN_Pos 6 //AN路输出是否取反 +#define PWM_OCR_INVAN_Msk (0x01 << PWM_OCR_INVAN_Pos) +#define PWM_OCR_INVBN_Pos 7 //BN路输出是否取反 +#define PWM_OCR_INVBN_Msk (0x01 << PWM_OCR_INVBN_Pos) + +#define PWM_BRKCR_OUTA_Pos 0 //刹车状态下A路输出电平 +#define PWM_BRKCR_OUTA_Msk (0x01 << PWM_BRKCR_OUTA_Pos) +#define PWM_BRKCR_OFFA_Pos 1 //刹车信号撤销时A路输出,0 立即恢复正常输出 1 保持当前输出直到计数器溢出再恢复正常输出 +#define PWM_BRKCR_OFFA_Msk (0x01 << PWM_BRKCR_OFFA_Pos) +#define PWM_BRKCR_OUTB_Pos 4 //刹车状态下B路输出电平 +#define PWM_BRKCR_OUTB_Msk (0x01 << PWM_BRKCR_OUTB_Pos) +#define PWM_BRKCR_OFFB_Pos 5 //刹车信号撤销时B路输出,0 立即恢复正常输出 1 保持当前输出直到计数器溢出再恢复正常输出 +#define PWM_BRKCR_OFFB_Msk (0x01 << PWM_BRKCR_OFFB_Pos) +#define PWM_BRKCR_OUTAN_Pos 8 //刹车状态下AN路输出电平 +#define PWM_BRKCR_OUTAN_Msk (0x01 << PWM_BRKCR_OUTAN_Pos) +#define PWM_BRKCR_OUTBN_Pos 9 //刹车状态下BN路输出电平 +#define PWM_BRKCR_OUTBN_Msk (0x01 << PWM_BRKCR_OUTBN_Pos) +#define PWM_BRKCR_STPCNT_Pos 10 //刹车状态下是否停止计数器,1 停止计数器 0 继续计数 +#define PWM_BRKCR_STPCNT_Msk (0x01 << PWM_BRKCR_STPCNT_Pos) +#define PWM_BRKCR_ACTIVE_Pos 17 //当前是否处于刹车状态 +#define PWM_BRKCR_ACTIVE_Msk (0x01 << PWM_BRKCR_ACTIVE_Pos) + +#define PWM_BRKIN_BRK0A_Pos 0 //A路是否受刹车输入PWM_BRK0影响 +#define PWM_BRKIN_BRK0A_Msk (0x01 << PWM_BRKIN_BRK0A_Pos) +#define PWM_BRKIN_BRK1A_Pos 1 +#define PWM_BRKIN_BRK1A_Msk (0x01 << PWM_BRKIN_BRK1A_Pos) +#define PWM_BRKIN_BRK2A_Pos 2 +#define PWM_BRKIN_BRK2A_Msk (0x01 << PWM_BRKIN_BRK2A_Pos) +#define PWM_BRKIN_BRK0B_Pos 4 +#define PWM_BRKIN_BRK0B_Msk (0x01 << PWM_BRKIN_BRK0B_Pos) +#define PWM_BRKIN_BRK1B_Pos 5 +#define PWM_BRKIN_BRK1B_Msk (0x01 << PWM_BRKIN_BRK1B_Pos) +#define PWM_BRKIN_BRK2B_Pos 6 +#define PWM_BRKIN_BRK2B_Msk (0x01 << PWM_BRKIN_BRK2B_Pos) + +#define PWM_OVFTRG_UPEN_Pos 0 //计数器向上溢出Trigger使能 +#define PWM_OVFTRG_UPEN_Msk (0x01 << PWM_OVFTRG_UPEN_Pos) +#define PWM_OVFTRG_DNEN_Pos 1 //计数器向下溢出Trigger使能 +#define PWM_OVFTRG_DNEN_Msk (0x01 << PWM_OVFTRG_DNEN_Pos) +#define PWM_OVFTRG_MUX_Pos 2 //Trigger输出到哪一路,0 trig[0] 1 trig[1] 2 trig[2] ... 7 trig[7] +#define PWM_OVFTRG_MUX_Msk (0x07 << PWM_OVFTRG_MUX_Pos) + +#define PWM_CMPTRG_CMP_Pos 0 //计数器值与此比较值相等时产生Trigger信号 +#define PWM_CMPTRG_CMP_Msk (0xFFFF<<PWM_CMPTRG_CMP_Pos) +#define PWM_CMPTRG_EN_Pos 16 +#define PWM_CMPTRG_EN_Msk (0x01 << PWM_CMPTRG_EN_Pos) +#define PWM_CMPTRG_MUX_Pos 17 //Trigger输出到哪一路,0 trig[0] 1 trig[1] 2 trig[2] ... 7 trig[7] +#define PWM_CMPTRG_MUX_Msk (0x07 << PWM_CMPTRG_MUX_Pos) +#define PWM_CMPTRG_WIDTH_Pos 20 //Trigger输出信号宽度,0 无输出 1 4个计数时钟 2 8个计数时钟 ... 63 252个计数时钟 +#define PWM_CMPTRG_WIDTH_Msk (0x3F << PWM_CMPTRG_WIDTH_Pos) +#define PWM_CMPTRG_DIR_Pos 28 //0 向上计数过程中产生Trigger 1 向下计数过程中产生Trigger +#define PWM_CMPTRG_DIR_Msk (0x01 << PWM_CMPTRG_DIR_Pos) +#define PWM_CMPTRG_ATP_Pos 29 //AD触发信号在所挖坑中的位置:0 0/8处 1 1/8处 ... 7 7/8处 +#define PWM_CMPTRG_ATP_Msk (0x07u<< PWM_CMPTRG_ATP_Pos) + +#define PWM_EVMUX_START_Pos 0 +#define PWM_EVMUX_START_Msk (0x07 << PWM_EVMUX_START_Pos) +#define PWM_EVMUX_STOP_Pos 4 +#define PWM_EVMUX_STOP_Msk (0x07 << PWM_EVMUX_STOP_Pos) +#define PWM_EVMUX_PAUSE_Pos 8 +#define PWM_EVMUX_PAUSE_Msk (0x07 << PWM_EVMUX_PAUSE_Pos) +#define PWM_EVMUX_RELOAD_Pos 12 +#define PWM_EVMUX_RELOAD_Msk (0x07 << PWM_EVMUX_RELOAD_Pos) +#define PWM_EVMUX_MASKA_Pos 16 +#define PWM_EVMUX_MASKA_Msk (0x07 << PWM_EVMUX_MASKA_Pos) +#define PWM_EVMUX_MASKB_Pos 20 +#define PWM_EVMUX_MASKB_Msk (0x07 << PWM_EVMUX_MASKB_Pos) +#define PWM_EVMUX_MASKAN_Pos 24 +#define PWM_EVMUX_MASKAN_Msk (0x07 << PWM_EVMUX_MASKAN_Pos) +#define PWM_EVMUX_MASKBN_Pos 28 +#define PWM_EVMUX_MASKBN_Msk (0x07 << PWM_EVMUX_MASKBN_Pos) + +#define PWM_EVMSK_OUTA_Pos 0 +#define PWM_EVMSK_OUTA_Msk (0x01 << PWM_EVMSK_OUTA_Pos) +#define PWM_EVMSK_OUTB_Pos 1 +#define PWM_EVMSK_OUTB_Msk (0x01 << PWM_EVMSK_OUTB_Pos) +#define PWM_EVMSK_OUTAN_Pos 2 +#define PWM_EVMSK_OUTAN_Msk (0x01 << PWM_EVMSK_OUTAN_Pos) +#define PWM_EVMSK_OUTBN_Pos 3 +#define PWM_EVMSK_OUTBN_Msk (0x01 << PWM_EVMSK_OUTBN_Pos) +#define PWM_EVMSK_IMME_Pos 4 //1 MASK立即生效 0 计数器溢出时生效 +#define PWM_EVMSK_IMME_Msk (0x01 << PWM_EVMSK_IMME_Pos) +#define PWM_EVMSK_STPCLR_Pos 8 //外部事件导致计数器停止时计数器是否清零,1 清零 0 保持当前值 +#define PWM_EVMSK_STPCLR_Msk (0x01 << PWM_EVMSK_STPCLR_Pos) + +#define PWM_IE_UPOVF_Pos 0 //向上计数时计数器溢出中断使能 +#define PWM_IE_UPOVF_Msk (0x01 << PWM_IE_UPOVF_Pos) +#define PWM_IE_DNOVF_Pos 1 //向下计数时计数器溢出中断使能 +#define PWM_IE_DNOVF_Msk (0x01 << PWM_IE_DNOVF_Pos) +#define PWM_IE_UPCMPA_Pos 2 //向上计数时计数器值与CMPA相等中断使能 +#define PWM_IE_UPCMPA_Msk (0x01 << PWM_IE_UPCMPA_Pos) +#define PWM_IE_UPCMPB_Pos 3 //向上计数时计数器值与CMPB相等中断使能 +#define PWM_IE_UPCMPB_Msk (0x01 << PWM_IE_UPCMPB_Pos) +#define PWM_IE_DNCMPA_Pos 4 //向下计数时计数器值与CMPA相等中断使能 +#define PWM_IE_DNCMPA_Msk (0x01 << PWM_IE_DNCMPA_Pos) +#define PWM_IE_DNCMPB_Pos 5 //向下计数时计数器值与CMPB相等中断使能 +#define PWM_IE_DNCMPB_Msk (0x01 << PWM_IE_DNCMPB_Pos) + +#define PWM_IF_UPOVF_Pos 0 +#define PWM_IF_UPOVF_Msk (0x01 << PWM_IF_UPOVF_Pos) +#define PWM_IF_DNOVF_Pos 1 +#define PWM_IF_DNOVF_Msk (0x01 << PWM_IF_DNOVF_Pos) +#define PWM_IF_UPCMPA_Pos 2 +#define PWM_IF_UPCMPA_Msk (0x01 << PWM_IF_UPCMPA_Pos) +#define PWM_IF_UPCMPB_Pos 3 +#define PWM_IF_UPCMPB_Msk (0x01 << PWM_IF_UPCMPB_Pos) +#define PWM_IF_DNCMPA_Pos 4 +#define PWM_IF_DNCMPA_Msk (0x01 << PWM_IF_DNCMPA_Pos) +#define PWM_IF_DNCMPB_Pos 5 +#define PWM_IF_DNCMPB_Msk (0x01 << PWM_IF_DNCMPB_Pos) + +#define PWM_SR_STAT_Pos 0 //0 IDLE 1 ACTIVE 2 PAUSE +#define PWM_SR_STAT_Msk (0x03 << PWM_SR_STAT_Pos) +#define PWM_SR_DIR_Pos 4 //0 向上计数 1 向下计数 +#define PWM_SR_DIR_Msk (0x01 << PWM_SR_DIR_Pos) +#define PWM_SR_OUTA_Pos 5 +#define PWM_SR_OUTA_Msk (0x01 << PWM_SR_OUTA_Pos) +#define PWM_SR_OUTB_Pos 6 +#define PWM_SR_OUTB_Msk (0x01 << PWM_SR_OUTB_Pos) +#define PWM_SR_OUTAN_Pos 7 +#define PWM_SR_OUTAN_Msk (0x01 << PWM_SR_OUTAN_Pos) +#define PWM_SR_OUTBN_Pos 8 +#define PWM_SR_OUTBN_Msk (0x01 << PWM_SR_OUTBN_Pos) + + +typedef struct { + __IO uint32_t START; + + __IO uint32_t SWBRK; //Software Brake,软件刹车 + + __IO uint32_t RESET; + + union { + __IO uint32_t RELOADEN; + + __IO uint32_t RESTART; + }; + + __IO uint32_t PULSE; + + __IO uint32_t FILTER; //外部信号滤波,0 无滤波 1 4个PCLK周期 2 8个PCLK周期 3 16个PCLK周期 + + __IO uint32_t BRKPOL; //刹车信号极性, + + __IO uint32_t BRKIE; + + union { + __IO uint32_t BRKIF; + + __IO uint32_t BRKSR; + }; + + __IO uint32_t EVSR; +} PWMG_TypeDef; + + +#define PWMG_START_PWM0_Pos 0 +#define PWMG_START_PWM0_Msk (0x01 << PWMG_START_PWM0_Pos) +#define PWMG_START_PWM1_Pos 1 +#define PWMG_START_PWM1_Msk (0x01 << PWMG_START_PWM1_Pos) +#define PWMG_START_PWM2_Pos 2 +#define PWMG_START_PWM2_Msk (0x01 << PWMG_START_PWM2_Pos) +#define PWMG_START_PWM3_Pos 3 +#define PWMG_START_PWM3_Msk (0x01 << PWMG_START_PWM3_Pos) +#define PWMG_START_PWM4_Pos 4 +#define PWMG_START_PWM4_Msk (0x01 << PWMG_START_PWM4_Pos) + +#define PWMG_SWBRK_PWM0A_Pos 0 +#define PWMG_SWBRK_PWM0A_Msk (0x01 << PWMG_SWBRK_PWM0A_Pos) +#define PWMG_SWBRK_PWM1A_Pos 1 +#define PWMG_SWBRK_PWM1A_Msk (0x01 << PWMG_SWBRK_PWM1A_Pos) +#define PWMG_SWBRK_PWM2A_Pos 2 +#define PWMG_SWBRK_PWM2A_Msk (0x01 << PWMG_SWBRK_PWM2A_Pos) +#define PWMG_SWBRK_PWM3A_Pos 3 +#define PWMG_SWBRK_PWM3A_Msk (0x01 << PWMG_SWBRK_PWM3A_Pos) +#define PWMG_SWBRK_PWM4A_Pos 4 +#define PWMG_SWBRK_PWM4A_Msk (0x01 << PWMG_SWBRK_PWM4A_Pos) +#define PWMG_SWBRK_PWM0B_Pos 8 +#define PWMG_SWBRK_PWM0B_Msk (0x01 << PWMG_SWBRK_PWM0B_Pos) +#define PWMG_SWBRK_PWM1B_Pos 9 +#define PWMG_SWBRK_PWM1B_Msk (0x01 << PWMG_SWBRK_PWM1B_Pos) +#define PWMG_SWBRK_PWM2B_Pos 10 +#define PWMG_SWBRK_PWM2B_Msk (0x01 << PWMG_SWBRK_PWM2B_Pos) +#define PWMG_SWBRK_PWM3B_Pos 11 +#define PWMG_SWBRK_PWM3B_Msk (0x01 << PWMG_SWBRK_PWM3B_Pos) +#define PWMG_SWBRK_PWM4B_Pos 12 +#define PWMG_SWBRK_PWM4B_Msk (0x01 << PWMG_SWBRK_PWM4B_Pos) + +#define PWMG_RESET_PWM0_Pos 0 +#define PWMG_RESET_PWM0_Msk (0x01 << PWMG_RESET_PWM0_Pos) +#define PWMG_RESET_PWM1_Pos 1 +#define PWMG_RESET_PWM1_Msk (0x01 << PWMG_RESET_PWM1_Pos) +#define PWMG_RESET_PWM2_Pos 2 +#define PWMG_RESET_PWM2_Msk (0x01 << PWMG_RESET_PWM2_Pos) +#define PWMG_RESET_PWM3_Pos 3 +#define PWMG_RESET_PWM3_Msk (0x01 << PWMG_RESET_PWM3_Pos) +#define PWMG_RESET_PWM4_Pos 4 +#define PWMG_RESET_PWM4_Msk (0x01 << PWMG_RESET_PWM4_Pos) + +#define PWMG_RELOADEN_PWM0_Pos 0 +#define PWMG_RELOADEN_PWM0_Msk (0x01 << PWMG_RELOADEN_PWM0_Pos) +#define PWMG_RELOADEN_PWM1_Pos 1 +#define PWMG_RELOADEN_PWM1_Msk (0x01 << PWMG_RELOADEN_PWM1_Pos) +#define PWMG_RELOADEN_PWM2_Pos 2 +#define PWMG_RELOADEN_PWM2_Msk (0x01 << PWMG_RELOADEN_PWM2_Pos) +#define PWMG_RELOADEN_PWM3_Pos 3 +#define PWMG_RELOADEN_PWM3_Msk (0x01 << PWMG_RELOADEN_PWM3_Pos) +#define PWMG_RELOADEN_PWM4_Pos 4 +#define PWMG_RELOADEN_PWM4_Msk (0x01 << PWMG_RELOADEN_PWM4_Pos) + +#define PWMG_RESTART_PWM0_Pos 8 +#define PWMG_RESTART_PWM0_Msk (0x01 << PWMG_RESTART_PWM0_Pos) +#define PWMG_RESTART_PWM1_Pos 9 +#define PWMG_RESTART_PWM1_Msk (0x01 << PWMG_RESTART_PWM1_Pos) +#define PWMG_RESTART_PWM2_Pos 10 +#define PWMG_RESTART_PWM2_Msk (0x01 << PWMG_RESTART_PWM2_Pos) +#define PWMG_RESTART_PWM3_Pos 11 +#define PWMG_RESTART_PWM3_Msk (0x01 << PWMG_RESTART_PWM3_Pos) +#define PWMG_RESTART_PWM4_Pos 12 +#define PWMG_RESTART_PWM4_Msk (0x01 << PWMG_RESTART_PWM4_Pos) + +#define PWMG_PULSE_EDGE0_Pos 0 //PWM_PULSE0 计数边沿,0 上升沿 1 下降沿 +#define PWMG_PULSE_EDGE0_Msk (0x01 << PWMG_PULSE_EDGE0_Pos) +#define PWMG_PULSE_EDGE1_Pos 1 +#define PWMG_PULSE_EDGE1_Msk (0x01 << PWMG_PULSE_EDGE1_Pos) + +#define PWMG_BRKPOL_BRK0_Pos 0 //PWMG_BRK0 刹车信号极性,0 低电平刹车 1 高电平刹车 +#define PWMG_BRKPOL_BRK0_Msk (0x01 << PWMG_BRKPOL_BRK0_Pos) +#define PWMG_BRKPOL_BRK1_Pos 1 +#define PWMG_BRKPOL_BRK1_Msk (0x01 << PWMG_BRKPOL_BRK1_Pos) +#define PWMG_BRKPOL_BRK2_Pos 2 +#define PWMG_BRKPOL_BRK2_Msk (0x01 << PWMG_BRKPOL_BRK2_Pos) + +#define PWMG_BRKIE_BRK0_Pos 0 +#define PWMG_BRKIE_BRK0_Msk (0x01 << PWMG_BRKIE_BRK0_Pos) +#define PWMG_BRKIE_BRK1_Pos 1 +#define PWMG_BRKIE_BRK1_Msk (0x01 << PWMG_BRKIE_BRK1_Pos) +#define PWMG_BRKIE_BRK2_Pos 2 +#define PWMG_BRKIE_BRK2_Msk (0x01 << PWMG_BRKIE_BRK2_Pos) + +#define PWMG_BRKIF_BRK0_Pos 0 +#define PWMG_BRKIF_BRK0_Msk (0x01 << PWMG_BRKIF_BRK0_Pos) +#define PWMG_BRKIF_BRK1_Pos 1 +#define PWMG_BRKIF_BRK1_Msk (0x01 << PWMG_BRKIF_BRK1_Pos) +#define PWMG_BRKIF_BRK2_Pos 2 +#define PWMG_BRKIF_BRK2_Msk (0x01 << PWMG_BRKIF_BRK2_Pos) + +#define PWMG_BRKSR_BRK0_Pos 4 //刹车引脚电平值 +#define PWMG_BRKSR_BRK0_Msk (0x01 << PWMG_BRKSR_BRK0_Pos) +#define PWMG_BRKSR_BRK1_Pos 5 +#define PWMG_BRKSR_BRK1_Msk (0x01 << PWMG_BRKSR_BRK1_Pos) +#define PWMG_BRKSR_BRK2_Pos 6 +#define PWMG_BRKSR_BRK2_Msk (0x01 << PWMG_BRKSR_BRK2_Pos) + +#define PWMG_EVSR_EV0_Pos 0 //外部事件信号电平值 +#define PWMG_EVSR_EV0_Msk (0x01 << PWMG_EVSR_EV0_Pos) +#define PWMG_EVSR_EV1_Pos 1 +#define PWMG_EVSR_EV1_Msk (0x01 << PWMG_EVSR_EV1_Pos) +#define PWMG_EVSR_EV2_Pos 2 +#define PWMG_EVSR_EV2_Msk (0x01 << PWMG_EVSR_EV2_Pos) +#define PWMG_EVSR_EV3_Pos 3 +#define PWMG_EVSR_EV3_Msk (0x01 << PWMG_EVSR_EV3_Pos) +#define PWMG_EVSR_EV4_Pos 4 +#define PWMG_EVSR_EV4_Msk (0x01 << PWMG_EVSR_EV4_Pos) +#define PWMG_EVSR_EV5_Pos 5 +#define PWMG_EVSR_EV5_Msk (0x01 << PWMG_EVSR_EV5_Pos) +#define PWMG_EVSR_EV6_Pos 6 +#define PWMG_EVSR_EV6_Msk (0x01 << PWMG_EVSR_EV6_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __IO uint32_t POSCNT; //[15:0] 位置计数器 + __IO uint32_t MAXCNT; //[15:0] 最大计数值 + + uint32_t RESERVED[5]; + + __IO uint32_t IE; //Interrupt Enable,为0时IF相应位不置位 + + __IO uint32_t IM; //Interrupt Mask,为0时即使IF相应位置位也不触发 QEI_IRQn 中断 + + __O uint32_t IC; //Interrupt Clear + + __I uint32_t IF; //Interrupt Flag + + __IO uint32_t IFOV; //interrupt Interrupt Overrun +} QEI_TypeDef; + + +#define QEI_CR_ENA_Pos 0 +#define QEI_CR_ENA_Msk (0x01 << QEI_CR_ENA_Pos) +#define QEI_CR_ABSWAP_Pos 4 //1 A、B引脚交换 +#define QEI_CR_ABSWAP_Msk (0x01 << QEI_CR_ABSWAP_Pos) +#define QEI_CR_X2X4_Pos 5 //0 X2计数模式 1 X4计数模式 +#define QEI_CR_X2X4_Msk (0x01 << QEI_CR_X2X4_Pos) +#define QEI_CR_RSTSRC_Pos 6 //Reset Source 0 计数匹配复位 1 索引信号复位 +#define QEI_CR_RSTSRC_Msk (0x01 << QEI_CR_RSTSRC_Pos) +#define QEI_CR_MODE_Pos 7 //工作模式选择 1 QEI模式 +#define QEI_CR_MODE_Msk (0x01 << QEI_CR_MODE_Pos) +#define QEI_CR_INDEX_Pos 9 //0 索引引脚为低电平 1 索引引脚为高电平 +#define QEI_CR_INDEX_Msk (0x01 << QEI_CR_INDEX_Pos) +#define QEI_CR_PAUSE_Pos 10 //1 空闲模式停止位 +#define QEI_CR_PAUSE_Msk (0x01 << QEI_CR_PAUSE_Pos) + +#define QEI_IE_INDEX_Pos 0 //检测到Index脉冲 +#define QEI_IE_INDEX_Msk (0x01 << QEI_IE_INDEX_Pos) +#define QEI_IE_MATCH_Pos 1 //POSCNT递增到与MAXCNT相等,或POSCNT从MAXCNT递减到0 +#define QEI_IE_MATCH_Msk (0x01 << QEI_IE_MATCH_Pos) +#define QEI_IE_CNTOV_Pos 2 //Counter Overrun,计数器溢出 +#define QEI_IE_CNTOV_Msk (0x01 << QEI_IE_CNTOV_Pos) +#define QEI_IE_ERROR_Pos 3 //计数器错误 +#define QEI_IE_ERROR_Msk (0x01 << QEI_IE_ERROR_Pos) + +#define QEI_IM_INDEX_Pos 0 +#define QEI_IM_INDEX_Msk (0x01 << QEI_IM_INDEX_Pos) +#define QEI_IM_MATCH_Pos 1 +#define QEI_IM_MATCH_Msk (0x01 << QEI_IM_MATCH_Pos) +#define QEI_IM_CNTOV_Pos 2 +#define QEI_IM_CNTOV_Msk (0x01 << QEI_IM_CNTOV_Pos) +#define QEI_IM_ERROR_Pos 3 +#define QEI_IM_ERROR_Msk (0x01 << QEI_IM_ERROR_Pos) + +#define QEI_IC_INDEX_Pos 0 +#define QEI_IC_INDEX_Msk (0x01 << QEI_IC_INDEX_Pos) +#define QEI_IC_MATCH_Pos 1 +#define QEI_IC_MATCH_Msk (0x01 << QEI_IC_MATCH_Pos) +#define QEI_IC_CNTOV_Pos 2 +#define QEI_IC_CNTOV_Msk (0x01 << QEI_IC_CNTOV_Pos) +#define QEI_IC_ERROR_Pos 3 +#define QEI_IC_ERROR_Msk (0x01 << QEI_IC_ERROR_Pos) + +#define QEI_IF_INDEX_Pos 0 +#define QEI_IF_INDEX_Msk (0x01 << QEI_IF_INDEX_Pos) +#define QEI_IF_MATCH_Pos 1 +#define QEI_IF_MATCH_Msk (0x01 << QEI_IF_MATCH_Pos) +#define QEI_IF_CNTOV_Pos 2 +#define QEI_IF_CNTOV_Msk (0x01 << QEI_IF_CNTOV_Pos) +#define QEI_IF_ERROR_Pos 3 +#define QEI_IF_ERROR_Msk (0x01 << QEI_IF_ERROR_Pos) + +#define QEI_IFOV_INDEX_Pos 0 +#define QEI_IFOV_INDEX_Msk (0x01 << QEI_IFOV_INDEX_Pos) +#define QEI_IFOV_MATCH_Pos 1 +#define QEI_IFOV_MATCH_Msk (0x01 << QEI_IFOV_MATCH_Pos) +#define QEI_IFOV_CNTOV_Pos 2 +#define QEI_IFOV_CNTOV_Msk (0x01 << QEI_IFOV_CNTOV_Pos) +#define QEI_IFOV_ERROR_Pos 3 +#define QEI_IFOV_ERROR_Msk (0x01 << QEI_IFOV_ERROR_Pos) + + + + +typedef struct { + __IO uint32_t EN; //[0] ENABLE + + __IO uint32_t IE; //只有为1时,IF[CHx]在DMA传输结束时才能变为1,否则将一直保持在0 + + __IO uint32_t IM; //当为1时,即使IF[CHx]为1,dma_int也不会因此变1 + + __IO uint32_t IF; //写1清零 + + __IO uint32_t DSTSGIE; //只在Scatter Gather模式下使用 + + __IO uint32_t DSTSGIM; //只在Scatter Gather模式下使用 + + __IO uint32_t DSTSGIF; //只在Scatter Gather模式下使用 + + __IO uint32_t SRCSGIE; //只在Scatter Gather模式下使用 + + __IO uint32_t SRCSGIM; //只在Scatter Gather模式下使用 + + __IO uint32_t SRCSGIF; //只在Scatter Gather模式下使用 + + uint32_t RESERVED[5]; + + __IO uint32_t PRI; //优先级,1 高优先级 0 低优先级 + + struct { + __IO uint32_t CR; + + __IO uint32_t AM; //Adress Mode + + __IO uint32_t DST; + + __IO uint32_t DSTSGADDR1; //只在Scatter Gather模式下使用 + + __IO uint32_t DSTSGADDR2; //只在Scatter Gather模式下使用 + + __IO uint32_t DSTSGADDR3; //只在Scatter Gather模式下使用 + + __IO uint32_t MUX; + + __IO uint32_t SRC; + + __IO uint32_t SRCSGADDR1; //只在Scatter Gather模式下使用 + + __IO uint32_t SRCSGADDR2; //只在Scatter Gather模式下使用 + + __IO uint32_t SRCSGADDR3; //只在Scatter Gather模式下使用 + + __I uint32_t DSTSR; + + __I uint32_t SRCSR; + + uint32_t RESERVED[3]; + } CH[4]; +} DMA_TypeDef; + + +#define DMA_IE_CH0_Pos 0 +#define DMA_IE_CH0_Msk (0x01 << DMA_IE_CH0_Pos) +#define DMA_IE_CH1_Pos 1 +#define DMA_IE_CH1_Msk (0x01 << DMA_IE_CH1_Pos) +#define DMA_IE_CH2_Pos 2 +#define DMA_IE_CH2_Msk (0x01 << DMA_IE_CH2_Pos) +#define DMA_IE_CH3_Pos 3 +#define DMA_IE_CH3_Msk (0x01 << DMA_IE_CH3_Pos) + +#define DMA_IM_CH0_Pos 0 +#define DMA_IM_CH0_Msk (0x01 << DMA_IM_CH0_Pos) +#define DMA_IM_CH1_Pos 1 +#define DMA_IM_CH1_Msk (0x01 << DMA_IM_CH1_Pos) +#define DMA_IM_CH2_Pos 2 +#define DMA_IM_CH2_Msk (0x01 << DMA_IM_CH2_Pos) +#define DMA_IM_CH3_Pos 3 +#define DMA_IM_CH3_Msk (0x01 << DMA_IM_CH3_Pos) + +#define DMA_IF_CH0_Pos 0 +#define DMA_IF_CH0_Msk (0x01 << DMA_IF_CH0_Pos) +#define DMA_IF_CH1_Pos 1 +#define DMA_IF_CH1_Msk (0x01 << DMA_IF_CH1_Pos) +#define DMA_IF_CH2_Pos 2 +#define DMA_IF_CH2_Msk (0x01 << DMA_IF_CH2_Pos) +#define DMA_IF_CH3_Pos 3 +#define DMA_IF_CH3_Msk (0x01 << DMA_IF_CH3_Pos) + +#define DMA_CR_LEN_Pos 0 //此通道传输单位个数 +#define DMA_CR_LEN_Msk (0xFFFFF<< DMA_CR_LEN_Pos) +#define DMA_CR_RXEN_Pos 24 //软件启动传输,传输方向为SRC-->DST +#define DMA_CR_RXEN_Msk (0x01 << DMA_CR_RXEN_Pos) +#define DMA_CR_TXEN_Pos 25 //软件启动传输,传输方向为DST-->SRC +#define DMA_CR_TXEN_Msk (0x01 << DMA_CR_TXEN_Pos) +#define DMA_CR_AUTORE_Pos 26 //Auto Restart, 通道在传输完成后,是否自动重新启动 +#define DMA_CR_AUTORE_Msk (0x01 << DMA_CR_AUTORE_Pos) +#define DMA_CR_STEPOP_Pos 27 //Step Operation, 步进传输,触发1次传送1个单位数据 +#define DMA_CR_STEPOP_Msk (0x01 << DMA_CR_STEPOP_Pos) + +#define DMA_AM_DSTAM_Pos 0 //Address Mode 0 地址固定 1 地址递增 2 scatter gather模式 +#define DMA_AM_DSTAM_Msk (0x03 << DMA_AM_DSTAM_Pos) +#define DMA_AM_DSTBIT_Pos 2 //传输位宽,0 字节 1 半字 2 字 +#define DMA_AM_DSTBIT_Msk (0x03 << DMA_AM_DSTBIT_Pos) +#define DMA_AM_DSTBURST_Pos 4 //传输类型,0 Single 1 Burst(Inc4) +#define DMA_AM_DSTBURST_Msk (0x01 << DMA_AM_DSTBURST_Pos) +#define DMA_AM_SRCAM_Pos 8 +#define DMA_AM_SRCAM_Msk (0x03 << DMA_AM_SRCAM_Pos) +#define DMA_AM_SRCBIT_Pos 10 +#define DMA_AM_SRCBIT_Msk (0x03 << DMA_AM_SRCBIT_Pos) +#define DMA_AM_SRCBURST_Pos 12 +#define DMA_AM_SRCBURST_Msk (0x01 << DMA_AM_SRCBURST_Pos) + +#define DMA_MUX_DSTHSSIG_Pos 0 //目标侧握手信号(handshake signal) +#define DMA_MUX_DSTHSSIG_Msk (0x03 << DMA_MUX_DSTHSSIG_Pos) +#define DMA_MUX_DSTHSEN_Pos 2 //目标侧握手使能(handshake enable) +#define DMA_MUX_DSTHSEN_Msk (0x01 << DMA_MUX_DSTHSEN_Pos) +#define DMA_MUX_SRCHSSIG_Pos 8 //源侧握手信号 +#define DMA_MUX_SRCHSSIG_Msk (0x03 << DMA_MUX_SRCHSSIG_Pos) +#define DMA_MUX_SRCHSEN_Pos 10 //源侧握手使能 +#define DMA_MUX_SRCHSEN_Msk (0x01 << DMA_MUX_SRCHSEN_Pos) +#define DMA_MUX_EXTHSSIG_Pos 16 //外部握手信号,0 TIMR0 1 TIMR1 2 TIMR2 3 TIMR3 4 TIMR4 5 DMA_TRIG0 6 DMA_TRIG1 +#define DMA_MUX_EXTHSSIG_Msk (0x07 << DMA_MUX_EXTHSSIG_Pos) +#define DMA_MUX_EXTHSEN_Pos 19 //外部握手使能,0 软件置位CR.RXEN/TXEN启动传输 1 EXTHSSRC选中的触发源启动传输 +#define DMA_MUX_EXTHSEN_Msk (0x01 << DMA_MUX_EXTHSEN_Pos) + +#define DMA_DSTSR_LEN_Pos 0 //剩余传输量 +#define DMA_DSTSR_LEN_Msk (0xFFFFF<<DMA_DSTSR_LEN_Pos) +#define DMA_DSTSR_ERR_Pos 31 //长度配置错误 +#define DMA_DSTSR_ERR_Msk (0x01u<< DMA_DSTSR_ERR_Pos) + +#define DMA_SRCSR_LEN_Pos 0 +#define DMA_SRCSR_LEN_Msk (0xFFFFF<<DMA_SRCSR_LEN_Pos) +#define DMA_SRCSR_ERR_Pos 31 +#define DMA_SRCSR_ERR_Msk (0x01u<< DMA_SRCSR_ERR_Pos) + + + + +typedef struct { + __IO uint32_t CR; //Control Register + + __O uint32_t CMD; //Command Register + + __I uint32_t SR; //Status Register + + __IO uint32_t IF; //Interrupt Flag,读取清零 + + __IO uint32_t IE; //Interrupt Enable + + __IO uint32_t BT2; + + __IO uint32_t BT0; //Bit Time Register 0 + + __IO uint32_t BT1; //Bit Time Register 1 + + uint32_t RESERVED; + + __IO uint32_t AFM; //Acceptance Filter Mode + + __IO uint32_t AFE; //Acceptance Filter Enable + + __I uint32_t ALC; //Arbitration Lost Capture, 仲裁丢失捕捉 + + __I uint32_t ECC; //Error code capture, 错误代码捕捉 + + __IO uint32_t EWLIM; //Error Warning Limit, 错误报警限制 + + __IO uint32_t RXERR; //RX错误计数 + + __IO uint32_t TXERR; //TX错误计数 + + struct { + __IO uint32_t INFO; //读访问接收Buffer,写访问发送Buffer + + __IO uint32_t DATA[12]; + } FRAME; + + __I uint32_t RMCNT; //Receive Message Count + + uint32_t RESERVED2[162]; + + __IO uint32_t ACR[16]; //Acceptance Check Register, 验收寄存器 + + uint32_t RESERVED3[16]; + + __IO uint32_t AMR[16]; //Acceptance Mask Register, 验收屏蔽寄存器;对应位写0,ID必须和验收寄存器匹配 +} CAN_TypeDef; + + +#define CAN_CR_RST_Pos 0 +#define CAN_CR_RST_Msk (0x01 << CAN_CR_RST_Pos) +#define CAN_CR_LOM_Pos 1 //Listen Only Mode +#define CAN_CR_LOM_Msk (0x01 << CAN_CR_LOM_Pos) +#define CAN_CR_STM_Pos 2 //Self Test Mode, 此模式下即使没有应答,CAN控制器也可以成功发送 +#define CAN_CR_STM_Msk (0x01 << CAN_CR_STM_Pos) +#define CAN_CR_SLEEP_Pos 4 //写1进入睡眠模式,有总线活动或中断时唤醒并自动清零此位 +#define CAN_CR_SLEEP_Msk (0x01 << CAN_CR_SLEEP_Pos) + +#define CAN_CMD_TXREQ_Pos 0 //Transmission Request +#define CAN_CMD_TXREQ_Msk (0x01 << CAN_CMD_TXREQ_Pos) +#define CAN_CMD_ABTTX_Pos 1 //Abort Transmission +#define CAN_CMD_ABTTX_Msk (0x01 << CAN_CMD_ABTTX_Pos) +#define CAN_CMD_RRB_Pos 2 //Release Receive Buffer +#define CAN_CMD_RRB_Msk (0x01 << CAN_CMD_RRB_Pos) +#define CAN_CMD_CLROV_Pos 3 //Clear Data Overrun +#define CAN_CMD_CLROV_Msk (0x01 << CAN_CMD_CLROV_Pos) +#define CAN_CMD_SRR_Pos 4 //Self Reception Request +#define CAN_CMD_SRR_Msk (0x01 << CAN_CMD_SRR_Pos) + +#define CAN_SR_RXDA_Pos 0 //Receive Data Available,接收FIFO中有完整消息可以读取 +#define CAN_SR_RXDA_Msk (0x01 << CAN_SR_RXDA_Pos) +#define CAN_SR_RXOV_Pos 1 //Receive FIFO Overrun,新接收的信息由于接收FIFO已满而丢掉 +#define CAN_SR_RXOV_Msk (0x01 << CAN_SR_RXOV_Pos) +#define CAN_SR_TXBR_Pos 2 //Transmit Buffer Release,0 正在处理前面的发送,现在不能写新的消息 1 可以写入新的消息发送 +#define CAN_SR_TXBR_Msk (0x01 << CAN_SR_TXBR_Pos) +#define CAN_SR_TXOK_Pos 3 //Transmit OK,successfully completed +#define CAN_SR_TXOK_Msk (0x01 << CAN_SR_TXOK_Pos) +#define CAN_SR_RXBUSY_Pos 4 //Receive Busy,正在接收 +#define CAN_SR_RXBUSY_Msk (0x01 << CAN_SR_RXBUSY_Pos) +#define CAN_SR_TXBUSY_Pos 5 //Transmit Busy,正在发送 +#define CAN_SR_TXBUSY_Msk (0x01 << CAN_SR_TXBUSY_Pos) +#define CAN_SR_ERRWARN_Pos 6 //1 至少一个错误计数器达到 Warning Limit +#define CAN_SR_ERRWARN_Msk (0x01 << CAN_SR_ERRWARN_Pos) +#define CAN_SR_BUSOFF_Pos 7 //1 CAN 控制器处于总线关闭状态,没有参与到总线活动 +#define CAN_SR_BUSOFF_Msk (0x01 << CAN_SR_BUSOFF_Pos) + +#define CAN_IF_RXDA_Pos 0 //IF.RXDA = SR.RXDA & IE.RXDA +#define CAN_IF_RXDA_Msk (0x01 << CAN_IF_RXDA_Pos) +#define CAN_IF_TXBR_Pos 1 //当IE.TXBR=1时,SR.TXBR由0变成1将置位此位 +#define CAN_IF_TXBR_Msk (0x01 << CAN_IF_TXBR_Pos) +#define CAN_IF_ERRWARN_Pos 2 //当IE.ERRWARN=1时,SR.ERRWARN或SR.BUSOFF 0-to-1 或 1-to-0将置位此位 +#define CAN_IF_ERRWARN_Msk (0x01 << CAN_IF_ERRWARN_Pos) +#define CAN_IF_RXOV_Pos 3 //IF.RXOV = SR.RXOV & IE.RXOV +#define CAN_IF_RXOV_Msk (0x01 << CAN_IF_RXOV_Pos) +#define CAN_IF_WKUP_Pos 4 //当IE.WKUP=1时,在睡眠模式下的CAN控制器检测到总线活动时硬件置位 +#define CAN_IF_WKUP_Msk (0x01 << CAN_IF_WKUP_Pos) +#define CAN_IF_ERRPASS_Pos 5 // +#define CAN_IF_ERRPASS_Msk (0x01 << CAN_IF_ERRPASS_Pos) +#define CAN_IF_ARBLOST_Pos 6 //Arbitration Lost,当IE.ARBLOST=1时,CAN控制器丢失仲裁变成接收方时硬件置位 +#define CAN_IF_ARBLOST_Msk (0x01 << CAN_IF_ARBLOST_Pos) +#define CAN_IF_BUSERR_Pos 7 //当IE.BUSERR=1时,CAN控制器检测到总线错误时硬件置位 +#define CAN_IF_BUSERR_Msk (0x01 << CAN_IF_BUSERR_Pos) + +#define CAN_IE_RXDA_Pos 0 +#define CAN_IE_RXDA_Msk (0x01 << CAN_IE_RXDA_Pos) +#define CAN_IE_TXBR_Pos 1 +#define CAN_IE_TXBR_Msk (0x01 << CAN_IE_TXBR_Pos) +#define CAN_IE_ERRWARN_Pos 2 +#define CAN_IE_ERRWARN_Msk (0x01 << CAN_IE_ERRWARN_Pos) +#define CAN_IE_RXOV_Pos 3 +#define CAN_IE_RXOV_Msk (0x01 << CAN_IE_RXOV_Pos) +#define CAN_IE_WKUP_Pos 4 +#define CAN_IE_WKUP_Msk (0x01 << CAN_IE_WKUP_Pos) +#define CAN_IE_ERRPASS_Pos 5 +#define CAN_IE_ERRPASS_Msk (0x01 << CAN_IE_ERRPASS_Pos) +#define CAN_IE_ARBLOST_Pos 6 +#define CAN_IE_ARBLOST_Msk (0x01 << CAN_IE_ARBLOST_Pos) +#define CAN_IE_BUSERR_Pos 7 +#define CAN_IE_BUSERR_Msk (0x01 << CAN_IE_BUSERR_Pos) + +#define CAN_BT2_BRP_Pos 0 +#define CAN_BT2_BRP_Msk (0x0F << CAN_BT2_BRP_Pos) + +#define CAN_BT0_BRP_Pos 0 //Baud Rate Prescaler,CAN时间单位=2*Tsysclk*((BT2.BRP<<6) + BT0.BRP + 1) +#define CAN_BT0_BRP_Msk (0x3F << CAN_BT0_BRP_Pos) +#define CAN_BT0_SJW_Pos 6 //Synchronization Jump Width +#define CAN_BT0_SJW_Msk (0x03 << CAN_BT0_SJW_Pos) + +#define CAN_BT1_TSEG1_Pos 0 //t_tseg1 = CAN时间单位 * (TSEG1+1) +#define CAN_BT1_TSEG1_Msk (0x0F << CAN_BT1_TSEG1_Pos) +#define CAN_BT1_TSEG2_Pos 4 //t_tseg2 = CAN时间单位 * (TSEG2+1) +#define CAN_BT1_TSEG2_Msk (0x07 << CAN_BT1_TSEG2_Pos) +#define CAN_BT1_SAM_Pos 7 //采样次数 0: sampled once 1: sampled three times +#define CAN_BT1_SAM_Msk (0x01 << CAN_BT1_SAM_Pos) + +#define CAN_ECC_SEGCODE_Pos 0 //Segment Code +#define CAN_ECC_SEGCODE_Msk (0x1F << CAN_ECC_SEGCODE_Pos) +#define CAN_ECC_DIR_Pos 5 //0 error occurred during transmission 1 during reception +#define CAN_ECC_DIR_Msk (0x01 << CAN_ECC_DIR_Pos) +#define CAN_ECC_ERRCODE_Pos 6 //Error Code:0 Bit error 1 Form error 2 Stuff error 3 other error +#define CAN_ECC_ERRCODE_Msk (0x03 << CAN_ECC_ERRCODE_Pos) + +#define CAN_INFO_DLC_Pos 0 //Data Length Control +#define CAN_INFO_DLC_Msk (0x0F << CAN_INFO_DLC_Pos) +#define CAN_INFO_RTR_Pos 6 //Remote Frame,1 远程帧 0 数据帧 +#define CAN_INFO_RTR_Msk (0x01 << CAN_INFO_RTR_Pos) +#define CAN_INFO_FF_Pos 7 //Frame Format,0 标准帧格式 1 扩展帧格式 +#define CAN_INFO_FF_Msk (0x01 << CAN_INFO_FF_Pos) + + + + +typedef struct { + __IO uint32_t DMA_MEM_ADDR; + + __IO uint32_t BLK; //Block Size and Count + + __IO uint32_t ARG; //Argument + + __IO uint32_t CMD; //Command + + __IO uint32_t RESP[4]; //Response + + __IO uint32_t DATA; + + __IO uint32_t STAT; + + __IO uint32_t CR1; + + __IO uint32_t CR2; + + __IO uint32_t IF; + + __IO uint32_t IM; //Interrupt Mask (Interrupt Flag Enable) + + __IO uint32_t IE; //Interrupt Enalbe + + __IO uint32_t CMD12ERR; //Auto CMD12 error status +} SDIO_TypeDef; + + +#define SDIO_BLK_SIZE_Pos 0 //0x200 512字节 0x400 1024字节 0x800 2048字节 +#define SDIO_BLK_SIZE_Msk (0xFFF << SDIO_BLK_SIZE_Pos) +#define SDIO_BLK_COUNT_Pos 16 //0 Stop Transfer 1 1块 2 2块 ... ... +#define SDIO_BLK_COUNT_Msk (0xFFF << SDIO_BLK_COUNT_Pos) + +#define SDIO_CMD_DMAEN_Pos 0 +#define SDIO_CMD_DMAEN_Msk (0x01 << SDIO_CMD_DMAEN_Pos) +#define SDIO_CMD_BLKCNTEN_Pos 1 +#define SDIO_CMD_BLKCNTEN_Msk (0x01 << SDIO_CMD_BLKCNTEN_Pos) +#define SDIO_CMD_AUTOCMD12_Pos 2 +#define SDIO_CMD_AUTOCMD12_Msk (0x01 << SDIO_CMD_AUTOCMD12_Pos) +#define SDIO_CMD_DIRREAD_Pos 4 //0 Write, Host to Card 1 Read, Card to Host +#define SDIO_CMD_DIRREAD_Msk (0x01 << SDIO_CMD_DIRREAD_Pos) +#define SDIO_CMD_MULTBLK_Pos 5 //0 Single Block 1 Multiple Block +#define SDIO_CMD_MULTBLK_Msk (0x01 << SDIO_CMD_MULTBLK_Pos) +#define SDIO_CMD_RESPTYPE_Pos 16 //响应类型,0 无响应 1 136位响应 2 48位响应 3 48位响应,Busy after response +#define SDIO_CMD_RESPTYPE_Msk (0x03 << SDIO_CMD_RESPTYPE_Pos) +#define SDIO_CMD_CRCCHECK_Pos 19 //Command CRC Check Enable +#define SDIO_CMD_CRCCHECK_Msk (0x01 << SDIO_CMD_CRCCHECK_Pos) +#define SDIO_CMD_IDXCHECK_Pos 20 //Command Index Check Enable +#define SDIO_CMD_IDXCHECK_Msk (0x01 << SDIO_CMD_IDXCHECK_Pos) +#define SDIO_CMD_HAVEDATA_Pos 21 //0 No Data Present 1 Data Present +#define SDIO_CMD_HAVEDATA_Msk (0x01 << SDIO_CMD_HAVEDATA_Pos) +#define SDIO_CMD_CMDTYPE_Pos 22 //0 NORMAL 1 SUSPEND 2 RESUME 3 ABORT +#define SDIO_CMD_CMDTYPE_Msk (0x03 << SDIO_CMD_CMDTYPE_Pos) +#define SDIO_CMD_CMDINDX_Pos 24 //Command Index,CMD0-63、ACMD0-63 +#define SDIO_CMD_CMDINDX_Msk (0x3F << SDIO_CMD_CMDINDX_Pos) + +#define SDIO_CR1_4BIT_Pos 1 //1 4 bit mode 0 1 bit mode +#define SDIO_CR1_4BIT_Msk (0x01 << SDIO_CR1_4BIT_Pos) +#define SDIO_CR1_8BIT_Pos 5 //1 8 bit mode is selected 0 8 bit mode is not selected +#define SDIO_CR1_8BIT_Msk (0x01 << SDIO_CR1_8BIT_Pos) +#define SDIO_CR1_CDBIT_Pos 6 //0 No Card 1 Card Inserted +#define SDIO_CR1_CDBIT_Msk (0x01 << SDIO_CR1_CDBIT_Pos) +#define SDIO_CR1_CDSRC_Pos 7 //Card Detect Source, 1 CR1.CDBIT位 0 SD_Detect引脚 +#define SDIO_CR1_CDSRC_Msk (0x01 << SDIO_CR1_CDSRC_Pos) +#define SDIO_CR1_PWRON_Pos 8 //1 Power on 0 Power off +#define SDIO_CR1_PWRON_Msk (0x01 << SDIO_CR1_PWRON_Pos) +#define SDIO_CR1_VOLT_Pos 9 //7 3.3V 6 3.0V 5 1.8V +#define SDIO_CR1_VOLT_Msk (0x07 << SDIO_CR1_VOLT_Pos) + +#define SDIO_CR2_CLKEN_Pos 0 //Internal Clock Enable +#define SDIO_CR2_CLKEN_Msk (0x01 << SDIO_CR2_CLKEN_Pos) +#define SDIO_CR2_CLKRDY_Pos 1 //Internal Clock Stable/Ready +#define SDIO_CR2_CLKRDY_Msk (0x01 << SDIO_CR2_CLKRDY_Pos) +#define SDIO_CR2_SDCLKEN_Pos 2 //SDCLK Enable +#define SDIO_CR2_SDCLKEN_Msk (0x01 << SDIO_CR2_SDCLKEN_Pos) +#define SDIO_CR2_SDCLKDIV_Pos 8 //SDCLK Frequency Div, 0x00 不分频 0x01 2分频 0x02 4分频 0x04 8分频 0x08 16分频 ... 0x80 256分频 +#define SDIO_CR2_SDCLKDIV_Msk (0xFF << SDIO_CR2_SDCLKDIV_Pos) +#define SDIO_CR2_TIMEOUT_Pos 16 //0 TMCLK*2^13 1 TMCLK*2^14 ... 14 TMCLK*2^27 +#define SDIO_CR2_TIMEOUT_Msk (0x0F << SDIO_CR2_TIMEOUT_Pos) +#define SDIO_CR2_RSTALL_Pos 24 //Software Reset for All +#define SDIO_CR2_RSTALL_Msk (0x01 << SDIO_CR2_RSTALL_Pos) +#define SDIO_CR2_RSTCMD_Pos 25 //Software Reset for CMD Line +#define SDIO_CR2_RSTCMD_Msk (0x01 << SDIO_CR2_RSTCMD_Pos) +#define SDIO_CR2_RSTDAT_Pos 26 //Software Reset for DAT Line +#define SDIO_CR2_RSTDAT_Msk (0x01 << SDIO_CR2_RSTDAT_Pos) + +#define SDIO_IF_CMDDONE_Pos 0 +#define SDIO_IF_CMDDONE_Msk (0x01 << SDIO_IF_CMDDONE_Pos) +#define SDIO_IF_TRXDONE_Pos 1 +#define SDIO_IF_TRXDONE_Msk (0x01 << SDIO_IF_TRXDONE_Pos) +#define SDIO_IF_BLKGAP_Pos 2 +#define SDIO_IF_BLKGAP_Msk (0x01 << SDIO_IF_BLKGAP_Pos) +#define SDIO_IF_DMADONE_Pos 3 +#define SDIO_IF_DMADONE_Msk (0x01 << SDIO_IF_DMADONE_Pos) +#define SDIO_IF_BUFWRRDY_Pos 4 +#define SDIO_IF_BUFWRRDY_Msk (0x01 << SDIO_IF_BUFWRRDY_Pos) +#define SDIO_IF_BUFRDRDY_Pos 5 +#define SDIO_IF_BUFRDRDY_Msk (0x01 << SDIO_IF_BUFRDRDY_Pos) +#define SDIO_IF_CARDINSR_Pos 6 +#define SDIO_IF_CARDINSR_Msk (0x01 << SDIO_IF_CARDINSR_Pos) +#define SDIO_IF_CARDRMOV_Pos 7 +#define SDIO_IF_CARDRMOV_Msk (0x01 << SDIO_IF_CARDRMOV_Pos) +#define SDIO_IF_CARD_Pos 8 +#define SDIO_IF_CARD_Msk (0x01 << SDIO_IF_CARD_Pos) +#define SDIO_IF_ERROR_Pos 15 +#define SDIO_IF_ERROR_Msk (0x01 << SDIO_IF_ERROR_Pos) +#define SDIO_IF_CMDTIMEOUT_Pos 16 +#define SDIO_IF_CMDTIMEOUT_Msk (0x01 << SDIO_IF_CMDTIMEOUT_Pos) +#define SDIO_IF_CMDCRCERR_Pos 17 +#define SDIO_IF_CMDCRCERR_Msk (0x01 << SDIO_IF_CMDCRCERR_Pos) +#define SDIO_IF_CMDENDERR_Pos 18 +#define SDIO_IF_CMDENDERR_Msk (0x01 << SDIO_IF_CMDENDCERR_Pos) +#define SDIO_IF_CMDIDXERR_Pos 19 +#define SDIO_IF_CMDIDXERR_Msk (0x01 << SDIO_IF_CMDIDXCERR_Pos) +#define SDIO_IF_DATTIMEOUT_Pos 20 +#define SDIO_IF_DATTIMEOUT_Msk (0x01 << SDIO_IF_DATTIMEOUT_Pos) +#define SDIO_IF_DATCRCERR_Pos 21 +#define SDIO_IF_DATCRCERR_Msk (0x01 << SDIO_IF_DATCRCERR_Pos) +#define SDIO_IF_DATENDERR_Pos 22 +#define SDIO_IF_DATENDERR_Msk (0x01 << SDIO_IF_DATENDCERR_Pos) +#define SDIO_IF_CURLIMERR_Pos 23 +#define SDIO_IF_CURLIMERR_Msk (0x01 << SDIO_IF_CURLIMERR_Pos) +#define SDIO_IF_CMD12ERR_Pos 24 +#define SDIO_IF_CMD12ERR_Msk (0x01 << SDIO_IF_CMD12ERR_Pos) +#define SDIO_IF_DMAERR_Pos 25 +#define SDIO_IF_DMAERR_Msk (0x01 << SDIO_IF_DMAERR_Pos) +#define SDIO_IF_RESPERR_Pos 28 +#define SDIO_IF_RESPERR_Msk (0x01 << SDIO_IF_RESPERR_Pos) + +#define SDIO_IE_CMDDONE_Pos 0 //Command Complete Status Enable +#define SDIO_IE_CMDDONE_Msk (0x01 << SDIO_IE_CMDDONE_Pos) +#define SDIO_IE_TRXDONE_Pos 1 //Transfer Complete Status Enable +#define SDIO_IE_TRXDONE_Msk (0x01 << SDIO_IE_TRXDONE_Pos) +#define SDIO_IE_BLKGAP_Pos 2 //Block Gap Event Status Enable +#define SDIO_IE_BLKGAP_Msk (0x01 << SDIO_IE_BLKGAP_Pos) +#define SDIO_IE_DMADONE_Pos 3 //DMA Interrupt Status Enable +#define SDIO_IE_DMADONE_Msk (0x01 << SDIO_IE_DMADONE_Pos) +#define SDIO_IE_BUFWRRDY_Pos 4 //Buffer Write Ready Status Enable +#define SDIO_IE_BUFWRRDY_Msk (0x01 << SDIO_IE_BUFWRRDY_Pos) +#define SDIO_IE_BUFRDRDY_Pos 5 //Buffer Read Ready Status Enable +#define SDIO_IE_BUFRDRDY_Msk (0x01 << SDIO_IE_BUFRDRDY_Pos) +#define SDIO_IE_CARDINSR_Pos 6 //Card Insertion Status Enable +#define SDIO_IE_CARDINSR_Msk (0x01 << SDIO_IE_CARDINSR_Pos) +#define SDIO_IE_CARDRMOV_Pos 7 //Card Removal Status Enable +#define SDIO_IE_CARDRMOV_Msk (0x01 << SDIO_IE_CARDRMOV_Pos) +#define SDIO_IE_CARD_Pos 8 +#define SDIO_IE_CARD_Msk (0x01 << SDIO_IE_CARD_Pos) +#define SDIO_IE_CMDTIMEOUT_Pos 16 //Command Timeout Error Status Enable +#define SDIO_IE_CMDTIMEOUT_Msk (0x01 << SDIO_IE_CMDTIMEOUT_Pos) +#define SDIO_IE_CMDCRCERR_Pos 17 //Command CRC Error Status Enable +#define SDIO_IE_CMDCRCERR_Msk (0x01 << SDIO_IE_CMDCRCERR_Pos) +#define SDIO_IE_CMDENDERR_Pos 18 //Command End Bit Error Status Enable +#define SDIO_IE_CMDENDERR_Msk (0x01 << SDIO_IE_CMDENDCERR_Pos) +#define SDIO_IE_CMDIDXERR_Pos 19 //Command Index Error Status Enable +#define SDIO_IE_CMDIDXERR_Msk (0x01 << SDIO_IE_CMDIDXCERR_Pos) +#define SDIO_IE_DATTIMEOUT_Pos 20 //Data Timeout Error Status Enable +#define SDIO_IE_DATTIMEOUT_Msk (0x01 << SDIO_IE_DATTIMEOUT_Pos) +#define SDIO_IE_DATCRCERR_Pos 21 //Data CRC Error Status Enable +#define SDIO_IE_DATCRCERR_Msk (0x01 << SDIO_IE_DATCRCERR_Pos) +#define SDIO_IE_DATENDERR_Pos 22 //Data End Bit Error Status Enable +#define SDIO_IE_DATENDERR_Msk (0x01 << SDIO_IE_DATENDCERR_Pos) +#define SDIO_IE_CURLIMERR_Pos 23 //Current Limit Error Status Enable +#define SDIO_IE_CURLIMERR_Msk (0x01 << SDIO_IE_CURLIMERR_Pos) +#define SDIO_IE_CMD12ERR_Pos 24 //Auto CMD12 Error Status Enable +#define SDIO_IE_CMD12ERR_Msk (0x01 << SDIO_IE_CMD12ERR_Pos) +#define SDIO_IE_DMAERR_Pos 25 //ADMA Error Status Enable +#define SDIO_IE_DMAERR_Msk (0x01 << SDIO_IE_DMAERR_Pos) +#define SDIO_IE_RESPERR_Pos 28 //Target Response Error Status Enable +#define SDIO_IE_RESPERR_Msk (0x01 << SDIO_IE_RESPERR_Pos) + +#define SDIO_IM_CMDDONE_Pos 0 +#define SDIO_IM_CMDDONE_Msk (0x01 << SDIO_IM_CMDDONE_Pos) +#define SDIO_IM_TRXDONE_Pos 1 +#define SDIO_IM_TRXDONE_Msk (0x01 << SDIO_IM_TRXDONE_Pos) +#define SDIO_IM_BLKGAP_Pos 2 +#define SDIO_IM_BLKGAP_Msk (0x01 << SDIO_IM_BLKGAP_Pos) +#define SDIO_IM_DMADONE_Pos 3 +#define SDIO_IM_DMADONE_Msk (0x01 << SDIO_IM_DMADONE_Pos) +#define SDIO_IM_BUFWRRDY_Pos 4 +#define SDIO_IM_BUFWRRDY_Msk (0x01 << SDIO_IM_BUFWRRDY_Pos) +#define SDIO_IM_BUFRDRDY_Pos 5 +#define SDIO_IM_BUFRDRDY_Msk (0x01 << SDIO_IM_BUFRDRDY_Pos) +#define SDIO_IM_CARDINSR_Pos 6 +#define SDIO_IM_CARDINSR_Msk (0x01 << SDIO_IM_CARDINSR_Pos) +#define SDIO_IM_CARDRMOV_Pos 7 +#define SDIO_IM_CARDRMOV_Msk (0x01 << SDIO_IM_CARDRMOV_Pos) +#define SDIO_IM_CARD_Pos 8 +#define SDIO_IM_CARD_Msk (0x01 << SDIO_IM_CARD_Pos) +#define SDIO_IM_CMDTIMEOUT_Pos 16 +#define SDIO_IM_CMDTIMEOUT_Msk (0x01 << SDIO_IM_CMDTIMEOUT_Pos) +#define SDIO_IM_CMDCRCERR_Pos 17 +#define SDIO_IM_CMDCRCERR_Msk (0x01 << SDIO_IM_CMDCRCERR_Pos) +#define SDIO_IM_CMDENDERR_Pos 18 +#define SDIO_IM_CMDENDERR_Msk (0x01 << SDIO_IM_CMDENDCERR_Pos) +#define SDIO_IM_CMDIDXERR_Pos 19 +#define SDIO_IM_CMDIDXERR_Msk (0x01 << SDIO_IM_CMDIDXCERR_Pos) +#define SDIO_IM_DATTIMEOUT_Pos 20 +#define SDIO_IM_DATTIMEOUT_Msk (0x01 << SDIO_IM_DATTIMEOUT_Pos) +#define SDIO_IM_DATCRCERR_Pos 21 +#define SDIO_IM_DATCRCERR_Msk (0x01 << SDIO_IM_DATCRCERR_Pos) +#define SDIO_IM_DATENDERR_Pos 22 +#define SDIO_IM_DATENDERR_Msk (0x01 << SDIO_IM_DATENDCERR_Pos) +#define SDIO_IM_CURLIMERR_Pos 23 +#define SDIO_IM_CURLIMERR_Msk (0x01 << SDIO_IM_CURLIMERR_Pos) +#define SDIO_IM_CMD12ERR_Pos 24 +#define SDIO_IM_CMD12ERR_Msk (0x01 << SDIO_IM_CMD12ERR_Pos) +#define SDIO_IM_DMAERR_Pos 25 +#define SDIO_IM_DMAERR_Msk (0x01 << SDIO_IM_DMAERR_Pos) +#define SDIO_IM_RESPERR_Pos 28 +#define SDIO_IM_RESPERR_Msk (0x01 << SDIO_IM_RESPERR_Pos) + +#define SDIO_CMD12ERR_NE_Pos 0 //Auto CMD12 not Executed +#define SDIO_CMD12ERR_NE_Msk (0x01 << SDIO_CMD12ERR_NE_Pos) +#define SDIO_CMD12ERR_TO_Pos 1 //Auto CMD12 Timeout Error +#define SDIO_CMD12ERR_TO_Msk (0x01 << SDIO_CMD12ERR_TO_Pos) +#define SDIO_CMD12ERR_CRC_Pos 2 //Auto CMD12 CRC Error +#define SDIO_CMD12ERR_CRC_Msk (0x01 << SDIO_CMD12ERR_CRC_Pos) +#define SDIO_CMD12ERR_END_Pos 3 //Auto CMD12 End Bit Error +#define SDIO_CMD12ERR_END_Msk (0x01 << SDIO_CMD12ERR_END_Pos) +#define SDIO_CMD12ERR_INDEX_Pos 4 //Auto CMD12 Index Error +#define SDIO_CMD12ERR_INDEX_Msk (0x01 << SDIO_CMD12ERR_INDEX_Pos) + + + + +typedef struct { + __IO uint32_t IF; //[0] 数据传输结束时置位,写1清零 + + __IO uint32_t IE; + + uint32_t RESERVED; + + __IO uint32_t START; + + __IO uint32_t RESERVED2; + + __IO uint32_t CR; + + __IO uint32_t CRH; + + __IO uint32_t CRV; + + uint32_t RESERVED3; + + __IO uint32_t BGC; //Background color + + uint32_t RESERVED4[6]; + + struct { + __IO uint32_t LCR; //Layer Control Register + + __IO uint32_t WHP; //Window Horizon Position + + __IO uint32_t WVP; //Window Vertical Position + + __IO uint32_t ADDR; //display data Address + + __IO uint32_t LLEN; //display data Line Length + + __IO uint32_t CK; //Color Key + + uint32_t RESERVED5[10]; + } L[2]; //Layer + + uint32_t RESERVED5[16]; + + __IO uint32_t MPUCR; + + __IO uint32_t MPUIR; + + __IO uint32_t MPUDR; + + __IO uint32_t MPUAR; + + __IO uint32_t MPULEN; +} LCD_TypeDef; + + +#define LCD_START_GO_Pos 1 //写1开始传输数据,数据传输结束后自动清零 +#define LCD_START_GO_Msk (0x01 << LCD_START_GO_Pos) + +#define LCD_CR_CLKDIV_Pos 0 //DOTCLK相对于模块时钟的分频比,0表示2分频,1表示3分频 ... +#define LCD_CR_CLKDIV_Msk (0x3F << LCD_CR_CLKDIV_Pos) +#define LCD_CR_CLKINV_Pos 6 //1 输出DOTCLK反向,用于DOTCLK下降沿采样数据的屏 +#define LCD_CR_CLKINV_Msk (0x01 << LCD_CR_CLKINV_Pos) +#define LCD_CR_CLKALW_Pos 7 //DOTCLK Always,1 DOTCLK一直翻转 0 DOTCLK在空闲时停在1 +#define LCD_CR_CLKALW_Msk (0x01 << LCD_CR_CLKALW_Pos) +#define LCD_CR_BURSTEN_Pos 8 //Burst Enable,0 只进行SINGLE读 1 优先Burst读 +#define LCD_CR_BURSTEN_Msk (0x01 << LCD_CR_BURSTEN_Pos) +#define LCD_CR_BURSTLEN_Pos 9 //Burst Length,0 Burst INCR4 1 Burst INCR8 +#define LCD_CR_BURSTLEN_Msk (0x01 << LCD_CR_BURSTLEN_Pos) +#define LCD_CR_AUTORESTA_Pos 13 //Auto Restart,1 刷新完一帧后自动重启刷新 +#define LCD_CR_AUTORESTA_Msk (0x01 << LCD_CR_AUTORESTA_Pos) +#define LCD_CR_IMMRELOAD_Pos 14 //Immediate Reload,立即将层配置寄存器的值加载到层工作寄存器 +#define LCD_CR_IMMRELOAD_Msk (0x01 << LCD_CR_IMMRELOAD_Pos) +#define LCD_CR_VBPRELOAD_Pos 15 //VBP Period Relaod +#define LCD_CR_VBPRELOAD_Msk (0x01 << LCD_CR_VBPRELOAD_Pos) +#define LCD_CR_FORMAT_Pos 16 //0 RGB565 1 RGB888 +#define LCD_CR_FORMAT_Msk (0x01 << LCD_CR_FORMAT_Pos) +#define LCD_CR_SEREN_Pos 17 //Serial RGB Enable +#define LCD_CR_SEREN_Msk (0x01 << LCD_CR_SEREN_Pos) +#define LCD_CR_MPUEN_Pos 18 //MPU Interface Enable +#define LCD_CR_MPUEN_Msk (0x01 << LCD_CR_MPUEN_Pos) +#define LCD_CR_VSYNCINV_Pos 19 //1 VSYNC反相输出 +#define LCD_CR_VSYNCINV_Msk (0x01 << LCD_CR_VSYNCINV_Pos) +#define LCD_CR_HSYNCINV_Pos 20 //1 HSYNC反相输出 +#define LCD_CR_HSYNCINV_Msk (0x01 << LCD_CR_HSYNCINV_Pos) + +#define LCD_CRH_HSW_Pos 0 //Hsync Width, 输出HSYNC低电平持续多少个DOTCLK周期,0表示1个周期 +#define LCD_CRH_HSW_Msk (0xFF << LCD_CRH_HSW_Pos) +#define LCD_CRH_HBP_Pos 8 //0表示1个DOTCLK周期 +#define LCD_CRH_HBP_Msk (0xFF << LCD_CRH_HBP_Pos) +#define LCD_CRH_PIX_Pos 16 //水平方向的像素个数,0表示1个,最大为1023 +#define LCD_CRH_PIX_Msk (0x3FF<< LCD_CRH_PIX_Pos) +#define LCD_CRH_HFP_Pos 26 //0表示1个DOTCLK周期 +#define LCD_CRH_HFP_Msk (0x3Fu<< LCD_CRH_HFP_Pos) + +#define LCD_CRV_VSW_Pos 0 //Vsync Width,输出VSYNC低电平持续多少个行周期,0表示1个周期 +#define LCD_CRV_VSW_Msk (0xFF << LCD_CRV_VSW_Pos) +#define LCD_CRV_VBP_Pos 8 //0表示1个水平行周期 +#define LCD_CRV_VBP_Msk (0xFF << LCD_CRV_VBP_Pos) +#define LCD_CRV_PIX_Pos 16 //垂直方向的像素个数,0表示1个,最大为1023 +#define LCD_CRV_PIX_Msk (0x3FF<< LCD_CRV_PIX_Pos) +#define LCD_CRV_VFP_Pos 26 //0表示1个水平行周期 +#define LCD_CRV_VFP_Msk (0x3Fu<< LCD_CRV_VFP_Pos) + +#define LCD_LCR_ALPHA_Pos 0 //Blend时该层的Alpha值 +#define LCD_LCR_ALPHA_Msk (0xFF << LCD_LCR_ALPHA_Pos) +#define LCD_LCR_EN_Pos 8 //Layer Enable +#define LCD_LCR_EN_Msk (0x01 << LCD_LCR_EN_Pos) +#define LCD_LCR_CKEN_Pos 9 //Layer Color Key Enable +#define LCD_LCR_CKEN_Msk (0x01 << LCD_LCR_CKEN_Pos) + +#define LCD_WHP_STA_Pos 0 //Layer Window 水平起始点 +#define LCD_WHP_STA_Msk (0x3FF<< LCD_WHP_STA_Pos) +#define LCD_WHP_STP_Pos 16 //Layer Window 水平结束点 +#define LCD_WHP_STP_Msk (0x3FF<< LCD_WHP_STP_Pos) + +#define LCD_WVP_STA_Pos 0 //Layer Window 竖直起始点 +#define LCD_WVP_STA_Msk (0x3FF<< LCD_WVP_STA_Pos) +#define LCD_WVP_STP_Pos 16 //Layer Window 竖直结束点 +#define LCD_WVP_STP_Msk (0x3FF<< LCD_WVP_STP_Pos) + +#define LCD_MPUCR_RCS1_0_Pos 0 //读操作时,CS上升沿到下降沿时间间隔,0 1个时钟中期 +#define LCD_MPUCR_RCS1_0_Msk (0x1F << LCD_MPUCR_RCS1_0_Pos) +#define LCD_MPUCR_RDHOLD_Pos 5 //RD低电平保持时间 +#define LCD_MPUCR_RDHOLD_Msk (0x1F << LCD_MPUCR_RDHOLD_Pos) +#define LCD_MPUCR_WCS1_0_Pos 10 //写操作时,CS上升沿到下降沿时间间隔 +#define LCD_MPUCR_WCS1_0_Msk (0x0F << LCD_MPUCR_WCS1_0_Pos) +#define LCD_MPUCR_WR1CS1_Pos 14 //WR上升沿到CS上升沿延时 +#define LCD_MPUCR_WR1CS1_Msk (0x03 << LCD_MPUCR_WR1CS1_Pos) +#define LCD_MPUCR_WRHOLD_Pos 16 //WR低电平保持时间 +#define LCD_MPUCR_WRHOLD_Msk (0x0F << LCD_MPUCR_WRHOLD_Pos) +#define LCD_MPUCR_CS0WR0_Pos 20 //CS下降沿到WR下降沿延时 +#define LCD_MPUCR_CS0WR0_Msk (0x03 << LCD_MPUCR_CS0WR0_Pos) + +#define LCD_MPULEN_VPIX_Pos 0 //行数,0表示1行 +#define LCD_MPULEN_VPIX_Msk (0x3FF<< LCD_MPULEN_VPIX_Pos) +#define LCD_MPULEN_HPIX_Pos 16 //每行像素数,0表示1个像素,只能赋奇数值,保证偶数个像素 +#define LCD_MPULEN_HPIX_Msk (0x3FF<< LCD_MPULEN_HPIX_Pos) + + + + +typedef struct { + __IO uint32_t IF; + + __IO uint32_t IE; + + __IO uint32_t CR; + + uint32_t RESERVED; + + struct { + __IO uint32_t MAR; //Memory Address Register,word对齐(低两位固定为0) + + __IO uint32_t OR; //Offset Register, added at the end of each line to determine the starting address of the next line + + __IO uint32_t PFCCR; //Pixel Format Converter Control Register + + __IO uint32_t COLOR; + } L[3]; //Layer: 0 Foreground 1 Background 2 Output + + __IO uint32_t NLR; //Number of Line Register +} DMA2D_TypeDef; + + +#define DMA2D_IF_DONE_Pos 1 //传输完成,写1清零 +#define DMA2D_IF_DONE_Msk (0x01 << DMA2D_IF_DONE_Pos) + +#define DMA2D_IE_DONE_Pos 1 +#define DMA2D_IE_DONE_Msk (0x01 << DMA2D_IE_DONE_Pos) + +#define DMA2D_CR_START_Pos 0 //开始传输 +#define DMA2D_CR_START_Msk (0x01 << DMA2D_CR_START_Pos) +#define DMA2D_CR_MODE_Pos 8 //0 存储器到存储器 1 存储器到存储器并执行PFC 2 存储器到存储器并执行混合 3 寄存器到存储器(仅输出阶段激合) +#define DMA2D_CR_MODE_Msk (0x03 << DMA2D_CR_MODE_Pos) +#define DMA2D_CR_WAIT_Pos 22 //每传输一块数据(64个字),等待指定个系统周期后再传输下一个块,防止DMA2D占用过多SDRAM带宽,影响LCD读取显示数据 +#define DMA2D_CR_WAIT_Msk (0x3FFu<<DMA2D_CR_WAIT_Pos) + +#define DMA2D_PFCCR_CFMT_Pos 0 //Color Format, 0 ARGB8888 1 RGB8888 2 RGB565 +#define DMA2D_PFCCR_CFMT_Msk (0x07 << DMA2D_CFMT_FORMAT_Pos) +#define DMA2D_PFCCR_AINV_Pos 3 //Alpha Invert +#define DMA2D_PFCCR_AINV_Msk (0x01 << DMA2D_PFCCR_AINV_Pos) +#define DMA2D_PFCCR_RBSWAP_Pos 4 //RB Swap, 0 RGB 1 BGR +#define DMA2D_PFCCR_RBSWAP_Msk (0x01 << DMA2D_PFCCR_RBSWAP_Pos) +#define DMA2D_PFCCR_AMODE_Pos 8 //Alpha Mode, 0 使用像素点自带Alpha值 1 使用PFCCR.ALPHA值 2 使用像素点自带Alpha值与PFCCR.ALPHA值的乘积 +#define DMA2D_PFCCR_AMODE_Msk (0x03 << DMA2D_PFCCR_AMODE_Pos) +#define DMA2D_PFCCR_ALPHA_Pos 24 +#define DMA2D_PFCCR_ALPHA_Msk (0xFFu<< DMA2D_PFCCR_ALPHA_Pos) + +#define DMA2D_NLR_NLINE_Pos 0 //Number of Line +#define DMA2D_NLR_NLINE_Msk (0xFFFF<<DMA2D_NLR_NLINE_Pos) +#define DMA2D_NLR_NPIXEL_Pos 16 //Number of Pixel per line +#define DMA2D_NLR_NPIXEL_Msk (0x3FFF<<DMA2D_NLR_NPIXEL_Pos) + + + + +typedef struct { + __IO uint32_t TIM; //SDRAM时序配置 + + __IO uint32_t CFG; + + __IO uint32_t T64; //64ms刷新周期配置 + + __IO uint32_t CR; + + __IO uint32_t SR; //0 Idle 1 Init 2 Self-refresh 4 Operating 5 Auto-refresh +} SDRAMC_TypeDef; + + +#define SDRAMC_TIM_TRCD_Pos 0 //Row to column delay, Ie. Activate to Command delay +#define SDRAMC_TIM_TRCD_Msk (0x03 << SDRAMC_TIM_TRCD_Pos) +#define SDRAMC_TIM_TRC_Pos 2 //Activate to Activate on same bank +#define SDRAMC_TIM_TRC_Msk (0x0F << SDRAMC_TIM_TRC_Pos) +#define SDRAMC_TIM_TRP_Pos 6 //Row precharge time, Ie. Precharge to Activate delay +#define SDRAMC_TIM_TRP_Msk (0x03 << SDRAMC_TIM_TRP_Pos) +#define SDRAMC_TIM_T100US_Pos 8 +#define SDRAMC_TIM_T100US_Msk (0x7FFF<<SDRAMC_TIM_T100US_Pos) + +#define SDRAMC_CFG_CLKDIV_Pos 0 //0 SYSCLK/1 1 SYSCLK/2 +#define SDRAMC_CFG_CLKDIV_Msk (0x01 << SDRAMC_CFG_CLKDIV_Pos) +#define SDRAMC_CFG_CASDELAY_Pos 1 //CAS Latency, 0 2 1 3 +#define SDRAMC_CFG_CASDELAY_Msk (0x01 << SDRAMC_CFG_CASDELAY_Pos) +#define SDRAMC_CFG_HIGHFREQ_Pos 2 //SDRAM工作时钟是否大于66MHz +#define SDRAMC_CFG_HIGHFREQ_Msk (0x01 << SDRAMC_CFG_HIGHFREQ_Pos) +#define SDRAMC_CFG_SIZE_Pos 3 //0 8MB 1 16MB 2 32MB +#define SDRAMC_CFG_SIZE_Msk (0x03 << SDRAMC_CFG_SIZE_Pos) + +#define SDRAMC_CR_ENTERSRF_Pos 0 //Enter Self-refresh +#define SDRAMC_CR_ENTERSRF_Msk (0x01 << SDRAMC_CR_ENTERSRF_Pos) +#define SDRAMC_CR_PWRON_Pos 1 //置位开始初始化流程,完成初始化自动清零 +#define SDRAMC_CR_PWRON_Msk (0x01 << SDRAMC_CR_PWRON_Pos) + + + + +typedef struct { + __IO uint32_t CMD; + + __IO uint32_t INPUT; //CORDIC计算输入数据,计算SIN和COS时,表示待计算的弧度 + //计算ARCTAN时,为防止溢出,需要将待计算数处理后再写入INPUT寄存器: + //待计算数 ∈ (0.05, 0.5]时,将待计算数乘以2后写入INPUT + //待计算数 ∈ (0.5, 2]时, 将待计算数直接写入INPUT + //待计算数 > 2时, 将待计算数除以2后写入INPUT + + __IO uint32_t COS; //COS计算结果 + + __IO uint32_t SIN; //SIN计算结果 + + __IO uint32_t ARCTAN; //ARCTAN计算结果 + + __IO uint32_t IF; + + __IO uint32_t IE; + + __IO uint32_t TANH; //写启动TANH计算,写完再读,返回计算结果 +} CORDIC_TypeDef; + + +#define CORDIC_CMD_START_Pos 0 //写1启动运算,运算完成后自动清零 +#define CORDIC_CMD_START_Msk (0x01 << CORDIC_CMD_START_Pos) +#define CORDIC_CMD_RANGE_Pos 1 //计算ARCTAN时输入数值的范围 0 (0.05, 0.5] 1 (0.5, 2] 2 >2 +#define CORDIC_CMD_RANGE_Msk (0x03 << CORDIC_CMD_RANGE_Pos) +#define CORDIC_CMD_SINCOS_Pos 3 //1 计算SIN和COS 0 计算ARCTAN +#define CORDIC_CMD_SINCOS_Msk (0x01 << CORDIC_CMD_SINCOS_Pos) +#define CORDIC_CMD_MULDIV_Pos 4 //0 计算SIN\COS\ARCTAN,具体由SINCOS位决定 2 计算除法 3 计算乘法 +#define CORDIC_CMD_MULDIV_Msk (0x03 << CORDIC_CMD_MULDIV_Pos) + +#define CORDIC_INPUT_F_Pos 0 //输入数据小数部分 +#define CORDIC_INPUT_F_Msk (0x3FFF << CORDIC_INPUT_F_Pos) +#define CORDIC_INPUT_I_Pos 14 //输入数据整数部分 +#define CORDIC_INPUT_I_Msk (0x03 << CORDIC_INPUT_I_Pos) +#define CORDIC_INPUT_F2_Pos 16 //输入数据小数部分,乘法中的第二个参数、除法中的被除数,乘法结果存于SIN、除法结果存于ARCTAN +#define CORDIC_INPUT_F2_Msk (0x3FFF << CORDIC_INPUT_F2_Pos) +#define CORDIC_INPUT_I2_Pos 30 //输入数据整数部分,乘法中的第二个参数、除法中的被除数,乘法结果存于SIN、除法结果存于ARCTAN +#define CORDIC_INPUT_I2_Msk (0x03u<< CORDIC_INPUT_I2_Pos) + +#define CORDIC_COS_F_Pos 0 //COS计算结果的小数部分 +#define CORDIC_COS_F_Msk (0x3FFF << CORDIC_COS_F_Pos) +#define CORDIC_COS_I_Pos 14 //COS计算结果的整数部分 +#define CORDIC_COS_I_Msk (0x03 << CORDIC_COS_I_Pos) +#define CORDIC_COS_DONE_Pos 16 //1 COS计算已完成 +#define CORDIC_COS_DONE_Msk (0x01 << CORDIC_COS_DONE_Pos) + +#define CORDIC_SIN_F_Pos 0 //SIN计算结果的小数部分 +#define CORDIC_SIN_F_Msk (0x3FFF << CORDIC_SIN_F_Pos) +#define CORDIC_SIN_I_Pos 14 //SIN计算结果的整数部分 +#define CORDIC_SIN_I_Msk (0x03 << CORDIC_SIN_I_Pos) +#define CORDIC_SIN_DONE_Pos 16 //1 SIN计算已完成 +#define CORDIC_SIN_DONE_Msk (0x01 << CORDIC_SIN_DONE_Pos) + +#define CORDIC_ARCTAN_F_Pos 0 //ARCTAN计算结果的小数部分 +#define CORDIC_ARCTAN_F_Msk (0x3FFF << CORDIC_ARCTAN_F_Pos) +#define CORDIC_ARCTAN_I_Pos 14 //ARCTAN计算结果的整数部分 +#define CORDIC_ARCTAN_I_Msk (0x03 << CORDIC_ARCTAN_I_Pos) +#define CORDIC_ARCTAN_DONE_Pos 16 //1 ARCTAN计算已完成 +#define CORDIC_ARCTAN_DONE_Msk (0x01 << CORDIC_ARCTAN_DONE_Pos) + +#define CORDIC_IF_DONE_Pos 0 //1 计算完成,写1清零 +#define CORDIC_IF_DONE_Msk (0x01 << CORDIC_IF_DONE_Pos) +#define CORDIC_IF_ERR_Pos 1 //1 计算出错,SIN或COS结果不在[0, 1]范围内,或ARCTAN计算结果不在[0, 2]范围内时置位,写1清零 +#define CORDIC_IF_ERR_Msk (0x01 << CORDIC_IF_ERR_Pos) + +#define CORDIC_IE_DONE_Pos 0 +#define CORDIC_IE_DONE_Msk (0x01 << CORDIC_IE_DONE_Pos) +#define CORDIC_IE_ERR_Pos 1 +#define CORDIC_IE_ERR_Msk (0x01 << CORDIC_IE_ERR_Pos) + +#define CORDIC_TANH_F_Pos 0 //TANH输入和计算结果的小数部分 +#define CORDIC_TANH_F_Msk (0x3FFF << CORDIC_TANH_F_Pos) +#define CORDIC_TANH_I_Pos 14 //TANH输入和计算结果的整数部分 +#define CORDIC_TANH_I_Msk (0x03 << CORDIC_TANH_I_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __IO uint32_t SR; + + uint32_t RESERVED[2]; + + __IO uint32_t DIVIDEND; //被除数 + + __IO uint32_t DIVISOR; //除数 + + __IO uint32_t QUO; //商 + + __IO uint32_t REMAIN; //余数 + + __IO uint32_t RADICAND; //被开方数 + + __IO uint32_t ROOT; //平方根,低16位为小数部分,高16位为整数部分 +} DIV_TypeDef; + + +#define DIV_CR_DIVGO_Pos 0 //写1启动除法运算,运算完成后自动清零 +#define DIV_CR_DIVGO_Msk (0x01 << DIV_CR_DIVGO_Pos) +#define DIV_CR_DIVSIGN_Pos 1 //0 有符号除法 1 无符号除法 +#define DIV_CR_DIVSIGN_Msk (0x01 << DIV_CR_DIVSIGN_Pos) +#define DIV_CR_ROOTGO_Pos 8 //写1启动开平方根运算,运算完成后自动清零 +#define DIV_CR_ROOTGO_Msk (0x01 << DIV_CR_ROOTGO_Pos) +#define DIV_CR_ROOTMOD_Pos 9 //开平方根模式:0 结果为整数 1 结果既有整数部分又有小数部分 +#define DIV_CR_ROOTMOD_Msk (0x01 << DIV_CR_ROOTMOD_Pos) + +#define DIV_SR_DIVEND_Pos 0 //除法运算完成标志,写1清零 +#define DIV_SR_DIVEND_Msk (0x01 << DIV_SR_DIVEND_Pos) +#define DIV_SR_DIVBUSY_Pos 1 //1 除法运算计算中 +#define DIV_SR_DIVBUSY_Msk (0x01 << DIV_SR_DIVBUSY_Pos) +#define DIV_SR_ROOTENDI_Pos 8 //开方整数运算完成标志,写1清零 +#define DIV_SR_ROOTENDI_Msk (0x01 << DIV_SR_ROOTENDI_Pos) +#define DIV_SR_ROOTENDF_Pos 9 //开方小数运算完成标志,写1清零 +#define DIV_SR_ROOTENDF_Msk (0x01 << DIV_SR_ROOTENDF_Pos) +#define DIV_SR_ROOTBUSY_Pos 10 //1 开方运算计算中 +#define DIV_SR_ROOTBUSY_Msk (0x01 << DIV_SR_ROOTBUSY_Pos) + + + + +typedef struct { + __IO uint32_t DATA; + + __IO uint32_t ADDR; + + __IO uint32_t ERASE; + + __IO uint32_t CACHE; + + __IO uint32_t CFG0; + + __IO uint32_t CFG1; + + __IO uint32_t CFG2; + + __IO uint32_t CFG3; + + __IO uint32_t CFG4; + + __IO uint32_t STAT; +} FMC_TypeDef; + + +#define FMC_ERASE_ADDR_Pos 0 //4K每页 +#define FMC_ERASE_ADDR_Msk (0x7FFFF << FMC_ERASE_ADDR_Pos) +#define FMC_ERASE_REQ_Pos 27 +#define FMC_ERASE_REQ_Msk (0x1Fu<< FMC_ERASE_REQ_Pos) + +#define FMC_CACHE_PROGEN_Pos 0 //Flash Program Enable +#define FMC_CACHE_PROGEN_Msk (0x01 << FMC_CACHE_PROGEN_Pos) +#define FMC_CACHE_CEN_Pos 16 //Cache Enable +#define FMC_CACHE_CEN_Msk (0x01 << FMC_CACHE_CEN_Pos) +#define FMC_CACHE_CPEN_Pos 17 //Cache Predict Enable +#define FMC_CACHE_CPEN_Msk (0x01 << FMC_CACHE_CPEN_Pos) +#define FMC_CACHE_CCLR_Pos 18 //Cache Clear,自动清零 +#define FMC_CACHE_CCLR_Msk (0x01 << FMC_CACHE_CCLR_Pos) + +#define FMC_STAT_ERASEBUSY_Pos 0 +#define FMC_STAT_ERASEBUSY_Msk (0x01 << FMC_STAT_ERASEBUSY_Pos) +#define FMC_STAT_PROGBUSY_Pos 1 +#define FMC_STAT_PROGBUSY_Msk (0x01 << FMC_STAT_PROGBUSY_Pos) +#define FMC_STAT_READBUSY_Pos 2 +#define FMC_STAT_READBUSY_Msk (0x01 << FMC_STAT_READBUSY_Pos) +#define FMC_STAT_FIFOEMPTY_Pos 3 //Write FIFO Empty +#define FMC_STAT_FIFOEMPTY_Msk (0x01 << FMC_STAT_FIFOEMPTY_Pos) +#define FMC_STAT_FIFOFULL_Pos 4 //Write FIFO Full +#define FMC_STAT_FIFOFULL_Msk (0x01 << FMC_STAT_FIFOFULL_Pos) +#define FMC_STAT_IDLE_Pos 31 +#define FMC_STAT_IDLE_Msk (0x01u<< FMC_STAT_IDLE_Pos) + + + + +typedef struct { + __IO uint32_t CFG; + __IO uint32_t TIM; + __I uint32_t SR; + __IO uint32_t IF; + __IO uint32_t IE; + __IO uint32_t GO; //写1开始执行 + __IO uint32_t ADDR; + __IO uint32_t DATA; + __IO uint32_t CMDAHB; //通过AHB总线读写Flash时使用的命令码 + __IO uint32_t CMD; //通过寄存器 读写Flash时使用的命令码 +} SFC_TypeDef; //Serial Flash Controller + + +#define SFC_CFG_CMDTYPE_Pos 0 //0 无地址、无数据、无WIP,用于写使能、写禁止 + //1 无地址、有数据(读1字节)、无WIP,用于读状态寄存器高8位、读状态寄存器低8位 + //2 无地址、有数据(读3字节)、无WIP,用于读Identification + //3 有地址、有数据(读2字节)、无WIP,用于读MID、读DID + //4 无地址、无数据、有WIP + //5 无地址、无数据、有WIP(自动写使能),用于片擦 + //6 无地址、有数据(写2字节)、有WIP(自动写使能),用于写16位状态寄存器 + //7 有地址、无数据、有WIP(自动写使能),用于扇区擦 +#define SFC_CFG_CMDTYPE_Msk (0x0F << SFC_CFG_CMDTYPE_Pos) +#define SFC_CFG_CMDWREN_Pos 5 //SFC->CMD寄存器写使能,使能后可将命令码写入CMD寄存器 +#define SFC_CFG_CMDWREN_Msk (0x01 << SFC_CFG_CMDWREN_Pos) +#define SFC_CFG_CLKDIV_Pos 6 //时钟分频:0 1分频 1 2分频 2 4分频 3 8分频 +#define SFC_CFG_CLKDIV_Msk (0x03 << SFC_CFG_CLKDIV_Pos) +#define SFC_CFG_ADDR4L_Pos 8 //编程操作的地址阶段使用4条数据线 +#define SFC_CFG_ADDR4L_Msk (0x01 << SFC_CFG_ADDR4L_Pos) +#define SFC_CFG_DATA4L_PP_Pos 9 //编程操作的数据阶段使用4条数据线 +#define SFC_CFG_DATA4L_PP_Msk (0x01 << SFC_CFG_DATA4L_PP_Pos) +#define SFC_CFG_DATA4L_RD_Pos 10 //读取操作的地址阶段和数据阶段使用:0 1条数据线 1 2条数据线 2 4条数据线 +#define SFC_CFG_DATA4L_RD_Msk (0x03 << SFC_CFG_DATA4L_RD_Pos) +#define SFC_CFG_WREN_Pos 12 //Flash写使能 +#define SFC_CFG_WREN_Msk (0x01 << SFC_CFG_WREN_Pos) + +#define SFC_TIM_WIP_CHK_ITV_Pos 0 //硬件自动查询WIP时间间隔 +#define SFC_TIM_WIP_CHK_ITV_Msk (0xFF << SFC_TIM_WIP_CHK_ITV_Pos) +#define SFC_TIM_WIP_CHK_LMT_Pos 8 //硬件自动查询WIP次数限值 +#define SFC_TIM_WIP_CHK_LMT_Msk (0xFF << SFC_TIM_WIP_CHK_LMT_Pos) +#define SFC_TIM_IDLETO_Pos 16 //空闲超时,超时后释放CS +#define SFC_TIM_IDLETO_Msk (0x3F << SFC_TIM_IDLETO_Pos) +#define SFC_TIM_CSHIGH_Pos 22 //CS拉高时间:0 1个SCLK时钟周期 1 2个 2 3个 3 4个 +#define SFC_TIM_CSHIGH_Msk (0x03 << SFC_TIM_CSHIGH_Pos) + +#define SFC_SR_BUSY_Pos 0 +#define SFC_SR_BUSY_Msk (0x01 << SFC_SR_BUSY_Pos) +#define SFC_SR_FIFOLVL_Pos 24 //FIFO Level +#define SFC_SR_FIFOLVL_Msk (0x07 << SFC_SR_FIFOLVL_Pos) +#define SFC_SR_FIFOEMPTY_Pos 27 //FIFO Empty +#define SFC_SR_FIFOEMPTY_Msk (0x01 << SFC_SR_FIFOEMPTY_Pos) +#define SFC_SR_FIFOHFULL_Pos 28 //FIFO Half Full +#define SFC_SR_FIFOHFULL_Msk (0x01 << SFC_SR_FIFOHFULL_Pos) +#define SFC_SR_FIFOFULL_Pos 29 //FIFO Full +#define SFC_SR_FIFOFULL_Msk (0x01 << SFC_SR_FIFOFULL_Pos) +#define SFC_SR_FIFOOVF_Pos 30 //FIFO Overflow +#define SFC_SR_FIFOOVF_Msk (0x01 << SFC_SR_FIFOOVF_Pos) +#define SFC_SR_FIFOUVF_Pos 31 //FIFO Underflow +#define SFC_SR_FIFOUVF_Msk (0x01u<< SFC_SR_FIFOUVF_Pos) + +#define SFC_IF_OVER_Pos 0 //操作结束,写1清零 +#define SFC_IF_OVER_Msk (0x01 << SFC_IF_OVER_Pos) +#define SFC_IF_ERR_Pos 1 //Error +#define SFC_IF_ERR_Msk (0x01 << SFC_IF_ERR_Pos) +#define SFC_IF_TO_Pos 2 //Timeout +#define SFC_IF_TO_Msk (0x01 << SFC_IF_TO_Pos) +#define SFC_IF_FIFOEMPTY_Pos 27 +#define SFC_IF_FIFOEMPTY_Msk (0x01 << SFC_IF_FIFOEMPTY_Pos) +#define SFC_IF_FIFOHFULL_Pos 28 +#define SFC_IF_FIFOHFULL_Msk (0x01 << SFC_IF_FIFOHFULL_Pos) +#define SFC_IF_FIFOFULL_Pos 29 +#define SFC_IF_FIFOFULL_Msk (0x01 << SFC_IF_FIFOFULL_Pos) +#define SFC_IF_FIFOOVF_Pos 30 +#define SFC_IF_FIFOOVF_Msk (0x01 << SFC_IF_FIFOOVF_Pos) +#define SFC_IF_FIFOUVF_Pos 31 +#define SFC_IF_FIFOUVF_Msk (0x01u<< SFC_IF_FIFOUVF_Pos) + +#define SFC_IE_OVER_Pos 0 //操作结束 +#define SFC_IE_OVER_Msk (0x01 << SFC_IE_OVER_Pos) +#define SFC_IE_ERR_Pos 1 +#define SFC_IE_ERR_Msk (0x01 << SFC_IE_ERR_Pos) +#define SFC_IE_TO_Pos 2 //Timeout +#define SFC_IE_TO_Msk (0x01 << SFC_IE_TO_Pos) +#define SFC_IE_FIFOEMPTY_Pos 27 +#define SFC_IE_FIFOEMPTY_Msk (0x01 << SFC_IE_FIFOEMPTY_Pos) +#define SFC_IE_FIFOHFULL_Pos 28 +#define SFC_IE_FIFOHFULL_Msk (0x01 << SFC_IE_FIFOHFULL_Pos) +#define SFC_IE_FIFOFULL_Pos 29 +#define SFC_IE_FIFOFULL_Msk (0x01 << SFC_IE_FIFOFULL_Pos) +#define SFC_IE_FIFOOVF_Pos 30 +#define SFC_IE_FIFOOVF_Msk (0x01 << SFC_IE_FIFOOVF_Pos) +#define SFC_IE_FIFOUVF_Pos 31 +#define SFC_IE_FIFOUVF_Msk (0x01u<< SFC_IE_FIFOUVF_Pos) + +#define SFC_CMDAHB_WREN_Pos 0 //Flash命令码:写使能 +#define SFC_CMDAHB_WREN_Msk (0xFF << SFC_CMDAHB_WREN_Pos) +#define SFC_CMDAHB_PP_Pos 8 //Flash命令码:页编程 +#define SFC_CMDAHB_PP_Msk (0xFF << SFC_CMDAHB_PP_Pos) +#define SFC_CMDAHB_RDSRL_Pos 16 //Flash命令码:读STATUS REG低8位 +#define SFC_CMDAHB_RDSRL_Msk (0xFF << SFC_CMDAHB_RDSRL_Pos) +#define SFC_CMDAHB_READ_Pos 24 //Flash命令码:读数据 +#define SFC_CMDAHB_READ_Msk (0xFFu<< SFC_CMDAHB_READ_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __I uint32_t SR; + + __O uint32_t SWTRG; //Software trigger + + __IO uint32_t DHR; +} DAC_TypeDef; + + +#define DAC_CR_EN_Pos 0 +#define DAC_CR_EN_Msk (0x01 << DAC_CR_EN_Pos) +#define DAC_CR_DMAEN_Pos 3 +#define DAC_CR_DMAEN_Msk (0x01 << DAC_CR_DMAEN_Pos) +#define DAC_CR_DHRFMT_Pos 9 //DHR Format, 0 12位数据,DHR[11:0] => DOR[11:0] 1 12位数据,DHR[15:4] => DOR[11:0] 3 8位数据,DHR[7 :0] => DOR[11:4] +#define DAC_CR_DHRFMT_Msk (0x03 << DAC_CR_DHRFMT_Pos) + +#define DAC_SR_DHRFULL_Pos 0 //0 DHR not Full, can write now +#define DAC_SR_DHRFULL_Msk (0x01 << DAC_SR_DHRFULL_Pos) + + + + +typedef struct { + __IO uint32_t CR; + + __O uint32_t DATAIN; + + __IO uint32_t INIVAL; //CR.EN写1时,INIVAL中的值写入RESULT + + __I uint32_t RESULT; +} CRC_TypeDef; + + +#define CRC_CR_EN_Pos 0 +#define CRC_CR_EN_Msk (0x01 << CRC_CR_EN_Pos) +#define CRC_CR_IREV_Pos 1 //输入数据是否翻转,0 bit顺序不变 1 bit顺序完全翻转 2 bit顺序字节内翻转 3 仅字节顺序翻转 +#define CRC_CR_IREV_Msk (0x03 << CRC_CR_IREV_Pos) +#define CRC_CR_INOT_Pos 3 //输入数据是否取反 +#define CRC_CR_INOT_Msk (0x01 << CRC_CR_INOT_Pos) +#define CRC_CR_OREV_Pos 4 //输出结果是否翻转,0 bit顺序不变 1 bit顺序完全翻转 2 bit顺序字节内翻转 3 仅字节顺序翻转 +#define CRC_CR_OREV_Msk (0x03 << CRC_CR_OREV_Pos) +#define CRC_CR_ONOT_Pos 6 //输出结果是否取反 +#define CRC_CR_ONOT_Msk (0x01 << CRC_CR_ONOT_Pos) +#define CRC_CR_POLY_Pos 7 //多项式选择,0 x^16+x^12+x^5+1 1 x^8+x^2+x+1 2 x^16+x^15+x^2+1 3 x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1 +#define CRC_CR_POLY_Msk (0x03 << CRC_CR_POLY_Pos) +#define CRC_CR_IBIT_Pos 9 //输入数据有效位数 0 32位 1 16位 2 8位 +#define CRC_CR_IBIT_Msk (0x03 << CRC_CR_IBIT_Pos) + + + + +typedef struct { + __IO uint32_t MINSEC; //分秒计数 + + __IO uint32_t DATHUR; //日时计数 + + __IO uint32_t MONDAY; //月周计数 + + __IO uint32_t YEAR; //[11:0] 年计数,支持1901-2199 + + __IO uint32_t MINSECAL; //分秒闹铃设置 + + __IO uint32_t DAYHURAL; //周时闹铃设置 + + __IO uint32_t LOAD; //将设置寄存器中的值同步到RTC中,同步完成自动清零 + + __IO uint32_t IE; + + __IO uint32_t IF; //写1清零 + + __IO uint32_t EN; //[0] 1 RTC使能 + + __IO uint32_t CFGABLE; //[0] 1 RTC可配置 + + __IO uint32_t TRIM; //时钟调整 + + __IO uint32_t TRIMM; //时钟微调整 +} RTC_TypeDef; + + +#define RTC_LOAD_TIME_Pos 0 +#define RTC_LOAD_TIME_Msk (0x01 << RTC_LOAD_TIME_Pos) +#define RTC_LOAD_ALARM_Pos 1 +#define RTC_LOAD_ALARM_Msk (0x01 << RTC_LOAD_ALARM_Pos) + +#define RTC_MINSEC_SEC_Pos 0 //秒计数,取值0--59 +#define RTC_MINSEC_SEC_Msk (0x3F << RTC_MINSEC_SEC_Pos) +#define RTC_MINSEC_MIN_Pos 6 //分钟计数,取值0--59 +#define RTC_MINSEC_MIN_Msk (0x3F << RTC_MINSEC_MIN_Pos) + +#define RTC_DATHUR_HOUR_Pos 0 //小时计数,取值0--23 +#define RTC_DATHUR_HOUR_Msk (0x1F << RTC_DATHUR_HOUR_Pos) +#define RTC_DATHUR_DATE_Pos 5 //date of month,取值1--31 +#define RTC_DATHUR_DATE_Msk (0x1F << RTC_DATHUR_DATE_Pos) + +#define RTC_MONDAY_DAY_Pos 0 //day of week,取值0--6 +#define RTC_MONDAY_DAY_Msk (0x07 << RTC_MONDAY_DAY_Pos) +#define RTC_MONDAY_MON_Pos 3 //月份计数,取值1--12 +#define RTC_MONDAY_MON_Msk (0x0F << RTC_MONDAY_MON_Pos) + +#define RTC_MINSECAL_SEC_Pos 0 //闹钟秒设置 +#define RTC_MINSECAL_SEC_Msk (0x3F << RTC_MINSECAL_SEC_Pos) +#define RTC_MINSECAL_MIN_Pos 6 //闹钟分钟设置 +#define RTC_MINSECAL_MIN_Msk (0x3F << RTC_MINSECAL_MIN_Pos) + +#define RTC_DAYHURAL_HOUR_Pos 0 //闹钟小时设置 +#define RTC_DAYHURAL_HOUR_Msk (0x1F << RTC_DAYHURAL_HOUR_Pos) +#define RTC_DAYHURAL_SUN_Pos 5 //周日闹钟有效 +#define RTC_DAYHURAL_SUN_Msk (0x01 << RTC_DAYHURAL_SUN_Pos) +#define RTC_DAYHURAL_MON_Pos 6 //周一闹钟有效 +#define RTC_DAYHURAL_MON_Msk (0x01 << RTC_DAYHURAL_MON_Pos) +#define RTC_DAYHURAL_TUE_Pos 7 //周二闹钟有效 +#define RTC_DAYHURAL_TUE_Msk (0x01 << RTC_DAYHURAL_TUE_Pos) +#define RTC_DAYHURAL_WED_Pos 8 //周三闹钟有效 +#define RTC_DAYHURAL_WED_Msk (0x01 << RTC_DAYHURAL_WED_Pos) +#define RTC_DAYHURAL_THU_Pos 9 //周四闹钟有效 +#define RTC_DAYHURAL_THU_Msk (0x01 << RTC_DAYHURAL_THU_Pos) +#define RTC_DAYHURAL_FRI_Pos 10 //周五闹钟有效 +#define RTC_DAYHURAL_FRI_Msk (0x01 << RTC_DAYHURAL_FRI_Pos) +#define RTC_DAYHURAL_SAT_Pos 11 //周六闹钟有效 +#define RTC_DAYHURAL_SAT_Msk (0x01 << RTC_DAYHURAL_SAT_Pos) + +#define RTC_IE_SEC_Pos 0 //秒中断使能 +#define RTC_IE_SEC_Msk (0x01 << RTC_IE_SEC_Pos) +#define RTC_IE_MIN_Pos 1 +#define RTC_IE_MIN_Msk (0x01 << RTC_IE_MIN_Pos) +#define RTC_IE_HOUR_Pos 2 +#define RTC_IE_HOUR_Msk (0x01 << RTC_IE_HOUR_Pos) +#define RTC_IE_DATE_Pos 3 +#define RTC_IE_DATE_Msk (0x01 << RTC_IE_DATE_Pos) +#define RTC_IE_ALARM_Pos 4 +#define RTC_IE_ALARM_Msk (0x01 << RTC_IE_ALARM_Pos) +#define RTC_IE_TRIM_Pos 5 //校准完成中断使能 +#define RTC_IE_TRIM_Msk (0x01 << RTC_IE_TRIM_Pos) +#define RTC_IE_HSEC_Pos 6 //半秒中断使能 +#define RTC_IE_HSEC_Msk (0x01 << RTC_IE_HSEC_Pos) +#define RTC_IE_QSEC_Pos 7 //四分之一秒中断使能 +#define RTC_IE_QSEC_Msk (0x01 << RTC_IE_QSEC_Pos) + +#define RTC_IF_SEC_Pos 0 //写1清零 +#define RTC_IF_SEC_Msk (0x01 << RTC_IF_SEC_Pos) +#define RTC_IF_MIN_Pos 1 +#define RTC_IF_MIN_Msk (0x01 << RTC_IF_MIN_Pos) +#define RTC_IF_HOUR_Pos 2 +#define RTC_IF_HOUR_Msk (0x01 << RTC_IF_HOUR_Pos) +#define RTC_IF_DATE_Pos 3 +#define RTC_IF_DATE_Msk (0x01 << RTC_IF_DATE_Pos) +#define RTC_IF_ALARM_Pos 4 +#define RTC_IF_ALARM_Msk (0x01 << RTC_IF_ALARM_Pos) +#define RTC_IF_TRIM_Pos 5 +#define RTC_IF_TRIM_Msk (0x01 << RTC_IF_TRIM_Pos) +#define RTC_IF_HSEC_Pos 6 +#define RTC_IF_HSEC_Msk (0x01 << RTC_IF_HSEC_Pos) +#define RTC_IF_QSEC_Pos 7 +#define RTC_IF_QSEC_Msk (0x01 << RTC_IF_QSEC_Pos) + +#define RTC_TRIM_ADJ_Pos 0 //用于调整BASECNT的计数周期,默认为32768,如果DEC为1,则计数周期调整为32768-ADJ,否则调整为32768+ADJ +#define RTC_TRIM_ADJ_Msk (0xFF << RTC_TRIM_ADJ_Pos) +#define RTC_TRIM_DEC_Pos 8 +#define RTC_TRIM_DEC_Msk (0x01 << RTC_TRIM_DEC_Pos) + +#define RTC_TRIMM_CYCLE_Pos 0 //用于计数周期微调,如果INC为1,则第n个计数周期调整为(32768±ADJ)+1,否则调整为(32768±ADJ)-1 + //cycles=0时,不进行微调整;cycles=1,则n为2;cycles=7,则n为8;以此类推 +#define RTC_TRIMM_CYCLE_Msk (0x07 << RTC_TRIMM_CYCLE_Pos) +#define RTC_TRIMM_INC_Pos 3 +#define RTC_TRIMM_INC_Msk (0x01 << RTC_TRIMM_INC_Pos) + + + + +typedef struct { + __IO uint32_t RSTVAL; //计数器计数到此值时产生复位 + + __IO uint32_t INTVAL; //计数器计数到此值时产生中断 + + __IO uint32_t CR; + + __IO uint32_t IF; //[0] 中断标志,写1清零 + + __IO uint32_t FEED; //写0x55喂狗 +} WDT_TypeDef; + + +#define WDT_CR_EN_Pos 0 +#define WDT_CR_EN_Msk (0x01 << WDT_CR_EN_Pos) +#define WDT_CR_RSTEN_Pos 1 +#define WDT_CR_RSTEN_Msk (0x01 << WDT_CR_RSTEN_Pos) +#define WDT_CR_INTEN_Pos 2 +#define WDT_CR_INTEN_Msk (0x01 << WDT_CR_INTEN_Pos) +#define WDT_CR_WINEN_Pos 3 // 窗口功能使能 +#define WDT_CR_WINEN_Msk (0x01 << WDT_CR_WINEN_Pos) +#define WDT_CR_CKDIV_Pos 8 // 时钟预分频,0 2分频 1 4分频 2 8分频 ... +#define WDT_CR_CKDIV_Msk (0x0F << WDT_CR_CKDIV_Pos) + + + + +typedef struct { + __IO uint32_t TXBUF[16][0x100]; //0x4000, 16KB + + __IO uint32_t RXBUF[0x100]; //0x4400,17KB + + struct { + __IO uint32_t TXCR; //Tx Control + + __IO uint32_t TXSR; //Tx Status + + uint32_t RESERVED; + + __IO uint32_t TXTRSZ; //Tx Transfer Size,以字节为单位 + } INEP[16]; + + struct { + __IO uint32_t RXCR; //Rx Control + + uint32_t RESERVED[3]; + } OUTEP[16]; //0x4600 + + __IO uint32_t DEVCR; //Device Control + + __I uint32_t DEVSR; //Device Status + + __IO uint32_t DEVIF; //Device Interrupt Flag + + __IO uint32_t DEVIE; //Device Interrupt Enable + + uint32_t RESERVED; + + __IO uint32_t EPIE; //Endpoint Interrupt Enable + + __IO uint32_t FFTHR; //FIFO Threshold + + __IO uint32_t RXSR; //Rx Status + + __IO uint32_t SETUPSR; //Setup Status + + __IO uint32_t EPIF; //Endpoint Interrupt Flag + + __IO uint32_t FRAMENR; //Frame Number + + uint32_t RESERVED1[(0x4700-0x4628)/4-1]; + + __IO uint32_t SETUPD1; + + __IO uint32_t SETUPD2; + + uint32_t RESERVED2[(0x4804-0x4704)/4-1]; + + __IO uint32_t EPCFG[16]; +} USBD_TypeDef; + + +#define USBD_TXCR_SNDSTALL_Pos 0 //Send Stall +#define USBD_TXCR_SNDSTALL_Msk (0x01 << USBD_TXCR_SNDSTALL_Pos) +#define USBD_TXCR_FLUSHFF_Pos 2 //Flush FIFO +#define USBD_TXCR_FLUSHFF_Msk (0x01 << USBD_TXCR_FLUSHFF_Pos) +#define USBD_TXCR_FFRDY_Pos 3 //FIFO Ready +#define USBD_TXCR_FFRDY_Msk (0x01 << USBD_TXCR_FFRDY_Pos) + +#define USBD_TXSR_SUCC_Pos 0 //Success +#define USBD_TXSR_SUCC_Msk (0x01 << USBD_TXSR_SUCC_Pos) +#define USBD_TXSR_DATSNT_Pos 1 //Data Sent +#define USBD_TXSR_DATSNT_Msk (0x01 << USBD_TXSR_DATSNT_Pos) +#define USBD_TXSR_NAKSNT_Pos 3 //NAK Sent +#define USBD_TXSR_NAKSNT_Msk (0x01 << USBD_TXSR_NAKSNT_Pos) + +#define USBD_RXCR_SNDSTALL_Pos 0 //Send Stall +#define USBD_RXCR_SNDSTALL_Msk (0x01 << USBD_RXCR_SNDSTALL_Pos) +#define USBD_RXCR_FLUSHFF_Pos 2 //Flush FIFO +#define USBD_RXCR_FLUSHFF_Msk (0x01 << USBD_RXCR_FLUSHFF_Pos) +#define USBD_RXCR_FFRDY_Pos 3 //FIFO Ready +#define USBD_RXCR_FFRDY_Msk (0x01 << USBD_RXCR_FFRDY_Pos) + +#define USBD_DEVCR_SPEED_Pos 0 //2 LS 3 FS +#define USBD_DEVCR_SPEED_Msk (0x03 << USBD_DEVCR_SPEED_Pos) +#define USBD_DEVCR_REMOTEWKUP_Pos 2 +#define USBD_DEVCR_REMOTEWKUP_Msk (0x01 << USBD_DEVCR_REMOTEWKUP_Pos) +#define USBD_DEVCR_SELFPWRD_Pos 3 //Self Powered +#define USBD_DEVCR_SELFPWRD_Msk (0x01 << USBD_DEVCR_SELFPWRD_Pos) +#define USBD_DEVCR_SYNCFRAME_Pos 4 //Sync Frame Command Support +#define USBD_DEVCR_SYNCFRAME_Msk (0x01 << USBD_DEVCR_SYNCFRAME_Pos) +#define USBD_DEVCR_CSRDONE_Pos 6 //CSR Configured Done +#define USBD_DEVCR_CSRDONE_Msk (0x01 << USBD_DEVCR_CSRDONE_Pos) +#define USBD_DEVCR_SETDESC_Pos 7 //Set Descriptor Command Support +#define USBD_DEVCR_SETDESC_Msk (0x01 << USBD_DEVCR_SETDESC_Pos) +#define USBD_DEVCR_DEVICE_Pos 8 //1 Device 0 Host +#define USBD_DEVCR_DEVICE_Msk (0x01 << USBD_DEVCR_DEVICE_Pos) + +#define USBD_DEVSR_CFG_Pos 0 //value set by Set Configuration command +#define USBD_DEVSR_CFG_Msk (0x0F << USBD_DEVSR_CFG_Pos) +#define USBD_DEVSR_INTF_Pos 4 //value set by Set Interface command +#define USBD_DEVSR_INTF_Msk (0x0F << USBD_DEVSR_INTF_Pos) +#define USBD_DEVSR_ALT_Pos 8 //value set by Set Alternate command +#define USBD_DEVSR_ALT_Msk (0x0F << USBD_DEVSR_ALT_Pos) +#define USBD_DEVSR_SUSP_Pos 12 //set when Suspend condition detected on the USB +#define USBD_DEVSR_SUSP_Msk (0x01 << USBD_DEVSR_SUSP_Pos) +#define USBD_DEVSR_FRNR_Pos 21 //Frame Number of received SOF +#define USBD_DEVSR_FRNR_Msk (0x7FF<< USBD_DEVSR_FRNR_Pos) + +#define USBD_DEVIF_SETCFG_Pos 0 //Set when receive Set Configuration command,写1清零 +#define USBD_DEVIF_SETCFG_Msk (0x01 << USBD_DEVIF_SETCFG_Pos) +#define USBD_DEVIF_SETINTF_Pos 1 //Set when receive Set Interface command +#define USBD_DEVIF_SETINTF_Msk (0x01 << USBD_DEVIF_SETINTF_Pos) +#define USBD_DEVIF_RST_Pos 3 //Set when Reset detected on the USB +#define USBD_DEVIF_RST_Msk (0x01 << USBD_DEVIF_RST_Pos) +#define USBD_DEVIF_SUSP_Pos 4 //Set when Suspend detected on the USB +#define USBD_DEVIF_SUSP_Msk (0x01 << USBD_DEVIF_SUSP_Pos) +#define USBD_DEVIF_SOF_Pos 5 //Set when SOF received +#define USBD_DEVIF_SOF_Msk (0x01 << USBD_DEVIF_SOF_Pos) +#define USBD_DEVIF_SETUP_Pos 6 //Set when Setup received +#define USBD_DEVIF_SETUP_Msk (0x01 << USBD_DEVIF_SETUP_Pos) +#define USBD_DEVIF_OUT_Pos 7 //Set when OUT received +#define USBD_DEVIF_OUT_Msk (0x01 << USBD_DEVIF_OUT_Pos) + +#define USBD_DEVIE_SETCFG_Pos 0 +#define USBD_DEVIE_SETCFG_Msk (0x01 << USBD_DEVIE_SETCFG_Pos) +#define USBD_DEVIE_SETINTF_Pos 1 +#define USBD_DEVIE_SETINTF_Msk (0x01 << USBD_DEVIE_SETINTF_Pos) +#define USBD_DEVIE_RST_Pos 3 +#define USBD_DEVIE_RST_Msk (0x01 << USBD_DEVIE_RST_Pos) +#define USBD_DEVIE_SUSP_Pos 4 +#define USBD_DEVIE_SUSP_Msk (0x01 << USBD_DEVIE_SUSP_Pos) +#define USBD_DEVIE_SOF_Pos 5 +#define USBD_DEVIE_SOF_Msk (0x01 << USBD_DEVIE_SOF_Pos) +#define USBD_DEVIE_SETUP_Pos 6 +#define USBD_DEVIE_SETUP_Msk (0x01 << USBD_DEVIE_SETUP_Pos) +#define USBD_DEVIE_OUT_Pos 7 +#define USBD_DEVIE_OUT_Msk (0x01 << USBD_DEVIE_OUT_Pos) + +#define USBD_EPIE_INEP0_Pos 0 +#define USBD_EPIE_INEP0_Msk (0x01 << USBD_EPIE_INEP0_Pos) +#define USBD_EPIE_INEP1_Pos 1 +#define USBD_EPIE_INEP1_Msk (0x01 << USBD_EPIE_INEP1_Pos) +#define USBD_EPIE_INEP2_Pos 2 +#define USBD_EPIE_INEP2_Msk (0x01 << USBD_EPIE_INEP2_Pos) +#define USBD_EPIE_INEP3_Pos 3 +#define USBD_EPIE_INEP3_Msk (0x01 << USBD_EPIE_INEP3_Pos) +#define USBD_EPIE_INEP4_Pos 4 +#define USBD_EPIE_INEP4_Msk (0x01 << USBD_EPIE_INEP4_Pos) +#define USBD_EPIE_INEP5_Pos 5 +#define USBD_EPIE_INEP5_Msk (0x01 << USBD_EPIE_INEP5_Pos) +#define USBD_EPIE_INEP6_Pos 6 +#define USBD_EPIE_INEP6_Msk (0x01 << USBD_EPIE_INEP6_Pos) +#define USBD_EPIE_INEP7_Pos 7 +#define USBD_EPIE_INEP7_Msk (0x01 << USBD_EPIE_INEP7_Pos) +#define USBD_EPIE_OUTEP0_Pos 16 +#define USBD_EPIE_OUTEP0_Msk (0x01 << USBD_EPIE_OUTEP0_Pos) +#define USBD_EPIE_OUTEP1_Pos 17 +#define USBD_EPIE_OUTEP1_Msk (0x01 << USBD_EPIE_OUTEP1_Pos) +#define USBD_EPIE_OUTEP2_Pos 18 +#define USBD_EPIE_OUTEP2_Msk (0x01 << USBD_EPIE_OUTEP2_Pos) +#define USBD_EPIE_OUTEP3_Pos 19 +#define USBD_EPIE_OUTEP3_Msk (0x01 << USBD_EPIE_OUTEP3_Pos) +#define USBD_EPIE_OUTEP4_Pos 20 +#define USBD_EPIE_OUTEP4_Msk (0x01 << USBD_EPIE_OUTEP4_Pos) +#define USBD_EPIE_OUTEP5_Pos 21 +#define USBD_EPIE_OUTEP5_Msk (0x01 << USBD_EPIE_OUTEP5_Pos) +#define USBD_EPIE_OUTEP6_Pos 22 +#define USBD_EPIE_OUTEP6_Msk (0x01 << USBD_EPIE_OUTEP6_Pos) +#define USBD_EPIE_OUTEP7_Pos 23 +#define USBD_EPIE_OUTEP7_Msk (0x01 << USBD_EPIE_OUTEP7_Pos) + +#define USBD_RXSR_SUCC_Pos 0 //Success +#define USBD_RXSR_SUCC_Msk (0x01 << USBD_RXSR_SUCC_Pos) +#define USBD_RXSR_DONE_Pos 1 //1 Transfer completed +#define USBD_RXSR_DONE_Msk (0x01 << USBD_RXSR_DONE_Pos) +#define USBD_RXSR_EPNR_Pos 16 //Endpoint Number +#define USBD_RXSR_EPNR_Msk (0x0F << USBD_RXSR_EPNR_Pos) +#define USBD_RXSR_TRSZ_Pos 22 //Transfer Size in byte +#define USBD_RXSR_TRSZ_Msk (0x3FFu<<USBD_RXSR_TRSZ_Pos) + +#define USBD_SETUPSR_SUCC_Pos 0 //Success +#define USBD_SETUPSR_SUCC_Msk (0x01 << USBD_SETUPSR_SUCC_Pos) +#define USBD_SETUPSR_DONE_Pos 1 //1 Transfer completed +#define USBD_SETUPSR_DONE_Msk (0x01 << USBD_SETUPSR_DONE_Pos) +#define USBD_SETUPSR_EPNR_Pos 16 +#define USBD_SETUPSR_EPNR_Msk (0x0F << USBD_SETUPSR_EPNR_Pos) + +#define USBD_EPIF_INEP0_Pos 0 //data sent or NAK sent +#define USBD_EPIF_INEP0_Msk (0x01 << USBD_EPIF_INEP0_Pos) +#define USBD_EPIF_INEP1_Pos 1 +#define USBD_EPIF_INEP1_Msk (0x01 << USBD_EPIF_INEP1_Pos) +#define USBD_EPIF_INEP2_Pos 2 +#define USBD_EPIF_INEP2_Msk (0x01 << USBD_EPIF_INEP2_Pos) +#define USBD_EPIF_INEP3_Pos 3 +#define USBD_EPIF_INEP3_Msk (0x01 << USBD_EPIF_INEP3_Pos) +#define USBD_EPIF_INEP4_Pos 4 +#define USBD_EPIF_INEP4_Msk (0x01 << USBD_EPIF_INEP4_Pos) +#define USBD_EPIF_INEP5_Pos 5 +#define USBD_EPIF_INEP5_Msk (0x01 << USBD_EPIF_INEP5_Pos) +#define USBD_EPIF_INEP6_Pos 6 +#define USBD_EPIF_INEP6_Msk (0x01 << USBD_EPIF_INEP6_Pos) +#define USBD_EPIF_INEP7_Pos 7 +#define USBD_EPIF_INEP7_Msk (0x01 << USBD_EPIF_INEP7_Pos) +#define USBD_EPIF_OUTEP0_Pos 16 //data available +#define USBD_EPIF_OUTEP0_Msk (0x01 << USBD_EPIF_OUTEP0_Pos) +#define USBD_EPIF_OUTEP1_Pos 17 +#define USBD_EPIF_OUTEP1_Msk (0x01 << USBD_EPIF_OUTEP1_Pos) +#define USBD_EPIF_OUTEP2_Pos 18 +#define USBD_EPIF_OUTEP2_Msk (0x01 << USBD_EPIF_OUTEP2_Pos) +#define USBD_EPIF_OUTEP3_Pos 19 +#define USBD_EPIF_OUTEP3_Msk (0x01 << USBD_EPIF_OUTEP3_Pos) +#define USBD_EPIF_OUTEP4_Pos 20 +#define USBD_EPIF_OUTEP4_Msk (0x01 << USBD_EPIF_OUTEP4_Pos) +#define USBD_EPIF_OUTEP5_Pos 21 +#define USBD_EPIF_OUTEP5_Msk (0x01 << USBD_EPIF_OUTEP5_Pos) +#define USBD_EPIF_OUTEP6_Pos 22 +#define USBD_EPIF_OUTEP6_Msk (0x01 << USBD_EPIF_OUTEP6_Pos) +#define USBD_EPIF_OUTEP7_Pos 23 +#define USBD_EPIF_OUTEP7_Msk (0x01 << USBD_EPIF_OUTEP7_Pos) + +#define USBD_EPCFG_EPNR_Pos 0 //Endpoint Number +#define USBD_EPCFG_EPNR_Msk (0x0F << USBD_EPCFG_EPNR_Pos) +#define USBD_EPCFG_DIR_Pos 4 //Endpoint Direction,0 OUT 1 IN +#define USBD_EPCFG_DIR_Msk (0x01 << USBD_EPCFG_DIR_Pos) +#define USBD_EPCFG_TYPE_Pos 5 //Endpoint Type,0 Control 1 Isochronous 2 Bulk 3 Interrupt +#define USBD_EPCFG_TYPE_Msk (0x03 << USBD_EPCFG_TYPE_Pos) +#define USBD_EPCFG_CFG_Pos 7 //Configuration number to which this endpoint belongs +#define USBD_EPCFG_CFG_Msk (0x0F << USBD_EPCFG_CFG_Pos) +#define USBD_EPCFG_INTF_Pos 11 //Interface number to which this endpoint belongs +#define USBD_EPCFG_INTF_Msk (0x0F << USBD_EPCFG_INTF_Pos) +#define USBD_EPCFG_ALT_Pos 15 //Alternate setting to which this endpoint belongs +#define USBD_EPCFG_ALT_Msk (0x0F << USBD_EPCFG_ALT_Pos) +#define USBD_EPCFG_PKSZ_Pos 19 //Maximum packet size +#define USBD_EPCFG_PKSZ_Msk (0xFF << USBD_EPCFG_PKSZ_Pos) + + + + +typedef struct { + __IO uint32_t TXBUF[0x100]; + + uint32_t RESERVED1[15][0x100]; //0x4000, 16KB + + __IO uint32_t RXBUF[0x100]; + + uint32_t RESERVED2[0x200]; //0x4C00 + + __IO uint32_t IF; //Interrupt Flag + + __IO uint32_t IE; //Interrupt Enable + + __IO uint32_t SR; //Status Register + + __IO uint32_t CR; //Control Register + + __IO uint32_t FFSZ; //FIFO Size + + __IO uint32_t FFTHR; //FIFO Threshold + + __IO uint32_t TXTRSZ; //Tx Transfer Size in byte + + uint32_t RESERVED3[(0x5034-0x4C18)/4-1]; + + __IO uint32_t FRAMEIV; //Frame Interval, 11999 for 1ms + + __IO uint32_t FRAMERM; //Frame Remaining + + __IO uint32_t FRAMENR; //Frame Number + + uint32_t RESERVED4[(0x5054-0x503C)/4-1]; + + __IO uint32_t PORTSR; //Port Status + + uint32_t RESERVED5[(0x5090-0x5054)/4-1]; + + __IO uint32_t TOKEN; + + __IO uint32_t OTGCSR; //OTG Control and Status +} USBH_TypeDef; + + +#define USBH_IF_RXSTAT_Pos 0 //receive a status write form device +#define USBH_IF_RXSTAT_Msk (0x01 << USBH_IF_RXSTAT_Pos) +#define USBH_IF_ABVTHR_Pos 1 //RX FIFO Above Threshold +#define USBH_IF_ABVTHR_Msk (0x01 << USBH_IF_ABVTHR_Pos) +#define USBH_IF_BLWTHR_Pos 2 //TX FIFO Below Threshold +#define USBH_IF_BLWTHR_Msk (0x01 << USBH_IF_BLWTHR_Pos) +#define USBH_IF_SOF_Pos 3 //SOF sent +#define USBH_IF_SOF_Msk (0x01 << USBH_IF_SOF_Pos) +#define USBH_IF_PORT_Pos 8 //Port status changed +#define USBH_IF_PORT_Msk (0x01 << USBH_IF_PORT_Pos) +#define USBH_IF_OTG_Pos 9 //SRP or HNP +#define USBH_IF_OTG_Msk (0x01 << USBH_IF_OTG_Pos) + +#define USBH_IE_RXSTAT_Pos 0 +#define USBH_IE_RXSTAT_Msk (0x01 << USBH_IE_RXSTAT_Pos) +#define USBH_IE_ABVTHR_Pos 1 +#define USBH_IE_ABVTHR_Msk (0x01 << USBH_IE_ABVTHR_Pos) +#define USBH_IE_BLWTHR_Pos 2 +#define USBH_IE_BLWTHR_Msk (0x01 << USBH_IE_BLWTHR_Pos) +#define USBH_IE_SOF_Pos 3 +#define USBH_IE_SOF_Msk (0x01 << USBH_IE_SOF_Pos) +#define USBH_IE_PORT_Pos 8 +#define USBH_IE_PORT_Msk (0x01 << USBH_IE_PORT_Pos) +#define USBH_IE_OTG_Pos 9 +#define USBH_IE_OTG_Msk (0x01 << USBH_IE_OTG_Pos) + +#define USBH_SR_RESP_Pos 0 //Response Code +#define USBH_SR_RESP_Msk (0x0F << USBH_SR_RESP_Pos) +#define USBH_SR_TRSZ_Pos 4 //Transfer Size in previous transaction +#define USBH_SR_TRSZ_Msk (0x3FF<< USBH_SR_TRSZ_Pos) + +#define USBH_CR_FLUSHFF_Pos 0 //Flush FIFO +#define USBH_CR_FLUSHFF_Msk (0x01 << USBH_CR_FLUSHFF_Pos) + +#define USBH_FFSZ_RX_Pos 0 //RX FIFO Size in word +#define USBH_FFSZ_RX_Msk (0x3FF<< USBH_FFSZ_RX_Pos) +#define USBH_FFSZ_TX_Pos 16 //TX FIFO Size in word +#define USBH_FFSZ_TX_Msk (0x3FF<< USBH_FFSZ_TX_Pos) + +#define USBH_FFTHR_TX_Pos 0 //TX FIFO Threshold in word +#define USBH_FFTHR_TX_Msk (0x3FF<< USBH_FFTHR_TX_Pos) +#define USBH_FFTHR_RX_Pos 16 //RX FIFO Threshold in word +#define USBH_FFTHR_RX_Msk (0x3FF<< USBH_FFTHR_RX_Pos) + +#define USBH_PORTSR_CONN_Pos 0 //Read: 1 Device connected 0 Device not connected +#define USBH_PORTSR_CONN_Msk (0x01 << USBH_PORTSR_CONN_Pos) +#define USBH_PORTSR_CLRENA_Pos 0 //Write: Clear Port Enable, 写1清除PORTSR.ENA +#define USBH_PORTSR_CLRENA_Msk (0x01 << USBH_PORTSR_CLRENA_Pos) +#define USBH_PORTSR_ENA_Pos 1 //1 Port enabled 0 Port disabled +#define USBH_PORTSR_ENA_Msk (0x01 << USBH_PORTSR_ENA_Pos) +#define USBH_PORTSR_SUSP_Pos 2 //1 Port is suspended 0 Port is not suspended +#define USBH_PORTSR_SUSP_Msk (0x01 << USBH_PORTSR_SUSP_Pos) +#define USBH_PORTSR_CLRSUSP_Pos 3 //Write: Clear Suspend Status, 写1清除PORTSR.SUSP,Initiate Resume +#define USBH_PORTSR_CLRSUSP_Msk (0x01 << USBH_PORTSR_CLRSUSP_Pos) +#define USBH_PORTSR_RESET_Pos 4 //1 Port Reset signalling active 0 Port Reset signalling not active +#define USBH_PORTSR_RESET_Msk (0x01 << USBH_PORTSR_RESET_Pos) +#define USBH_PORTSR_POWER_Pos 8 //1 Port power on 0 Port power off +#define USBH_PORTSR_POWER_Msk (0x01 << USBH_PORTSR_POWER_Pos) +#define USBH_PORTSR_SPEED_Pos 9 //Read: 1 Low-Speed device attached 0 Full-Speed device attached +#define USBH_PORTSR_SPEED_Msk (0x01 << USBH_PORTSR_SPEED_Pos) +#define USBH_PORTSR_CLRPOWER_Pos 9 //Write: Clear Port Power status, 写1清除PORTSR.POWER +#define USBH_PORTSR_CLRPOWER_Msk (0x01 << USBH_PORTSR_CLRPOWER_Pos) +#define USBH_PORTSR_CONNCHG_Pos 16 //1 PORTSR.CONN changed,写1清零 +#define USBH_PORTSR_CONNCHG_Msk (0x01 << USBH_PORTSR_CONNCHG_Pos) +#define USBH_PORTSR_ENACHG_Pos 17 //1 PORTSR.ENA changed,写1清零 +#define USBH_PORTSR_ENACHG_Msk (0x01 << USBH_PORTSR_ENACHG_Pos) +#define USBH_PORTSR_SUSPCHG_Pos 18 //set when a full Resume sequence is finished,写1清零 +#define USBH_PORTSR_SUSPCHG_Msk (0x01 << USBH_PORTSR_SUSPCHG_Pos) +#define USBH_PORTSR_RSTCHG_Pos 20 //set at the end of the Port Reset signal,写1清零 +#define USBH_PORTSR_RSTCHG_Msk (0x01 << USBH_PORTSR_RSTCHG_Pos) + +#define USBH_TOKEN_ADDR_Pos 0 +#define USBH_TOKEN_ADDR_Msk (0x7F << USBH_TOKEN_ADDR_Pos) +#define USBH_TOKEN_EPNR_Pos 7 //Endport Number +#define USBH_TOKEN_EPNR_Msk (0x0F << USBH_TOKEN_EPNR_Pos) +#define USBH_TOKEN_DATAX_Pos 11 //0 DATA0 1 DATA1 +#define USBH_TOKEN_DATAX_Msk (0x01 << USBH_TOKEN_DATAX_Pos) +#define USBH_TOKEN_TYPE_Pos 13 //13 SETUP 1 OUT 9 IN +#define USBH_TOKEN_TYPE_Msk (0x0F << USBH_TOKEN_TYPE_Pos) +#define USBH_TOKEN_ISO_Pos 17 //1 ISO transfer 0 Non-ISO transfer +#define USBH_TOKEN_ISO_Msk (0x01 << USBH_TOKEN_ISO_Pos) +#define USBH_TOKEN_SPEED_Pos 18 //2 LS 3 FS +#define USBH_TOKEN_SPEED_Msk (0x03 << USBH_TOKEN_SPEED_Pos) +#define USBH_TOKEN_TRSZ_Pos 20 //Transfer Size in byte +#define USBH_TOKEN_TRSZ_Msk (0x3FF<< USBH_TOKEN_TRSZ_Pos) + +#define USBH_OTGCSR_SRSUCC_Pos 0 //Session Request Success +#define USBH_OTGCSR_SRSUCC_Msk (0x01 << USBH_OTGCSR_SRSUCC_Pos) +#define USBH_OTGCSR_SRSCHG_Pos 1 //Session Request Status Change, set to 1 on Session Request Success, 写1清零 +#define USBH_OTGCSR_SRSCHG_Msk (0x01 << USBH_OTGCSR_SRSCHG_Pos) +#define USBH_OTGCSR_HNSUCC_Pos 2 //Host Negotiation Success +#define USBH_OTGCSR_HNSUCC_Msk (0x01 << USBH_OTGCSR_HNSUCC_Pos) +#define USBH_OTGCSR_HNSCHG_Pos 3 //Host Negotiation Status Change, set to 1 on Host Negotiation Success,写1清零 +#define USBH_OTGCSR_HNSCHG_Msk (0x01 << USBH_OTGCSR_HNSCHG_Pos) +#define USBH_OTGCSR_SRDET_Pos 4 //Session Request Detected +#define USBH_OTGCSR_SRDET_Msk (0x01 << USBH_OTGCSR_SRDET_Pos) +#define USBH_OTGCSR_SRDCHG_Pos 5 //Session Request Detected Change, set to 1 when a Session Request is detected,写1清零 +#define USBH_OTGCSR_SRDCHG_Msk (0x01 << USBH_OTGCSR_SRDCHG_Pos) +#define USBH_OTGCSR_HNDET_Pos 6 //Host Negotiation Detected +#define USBH_OTGCSR_HNDET_Msk (0x01 << USBH_OTGCSR_HNDET_Pos) +#define USBH_OTGCSR_HNDCHG_Pos 7 //Host Negotiation Detect Change, set to 1 when a Host Negotiation is detected, 写1清零 +#define USBH_OTGCSR_HNDCHG_Msk (0x01 << USBH_OTGCSR_HNDCHG_Pos) +#define USBH_OTGCSR_ID_Pos 8 //Connector ID Status, 0 in A-device mode, 1 in B-device mode +#define USBH_OTGCSR_ID_Msk (0x01 << USBH_OTGCSR_ID_Pos) +#define USBH_OTGCSR_IDCHG_Pos 9 //set when OTGCSR.ID changed, 写1清零 +#define USBH_OTGCSR_IDCHG_Msk (0x01 << USBH_OTGCSR_IDCHG_Pos) +#define USBH_OTGCSR_MODE_Pos 10 //0 Host mode 1 Device mode +#define USBH_OTGCSR_MODE_Msk (0x01 << USBH_OTGCSR_MODE_Pos) +#define USBH_OTGCSR_SRPREQ_Pos 16 //SRP Request +#define USBH_OTGCSR_SRPREQ_Msk (0x01 << USBH_OTGCSR_SRPREQ_Pos) +#define USBH_OTGCSR_HNPREQ_Pos 17 //HNP Request +#define USBH_OTGCSR_HNPREQ_Msk (0x01 << USBH_OTGCSR_HNPREQ_Pos) +#define USBH_OTGCSR_HHNPENA_Pos 18 //Host HNP Enable, set by app when Set Feature Set HNP Enable is successful on connected device +#define USBH_OTGCSR_HHNPENA_Msk (0x01 << USBH_OTGCSR_HHNPENA_Pos) +#define USBH_OTGCSR_HNPENA_Pos 19 //set by app when receives Set Feature Set HNP Enable command +#define USBH_OTGCSR_HNPENA_Msk (0x01 << USBH_OTGCSR_HNPENA_Pos) +#define USBH_OTGCSR_SRPCAP_Pos 20 //SRP Capable +#define USBH_OTGCSR_SRPCAP_Msk (0x01 << USBH_OTGCSR_SRPCAP_Pos) +#define USBH_OTGCSR_HNPCAP_Pos 21 //HNP Capable +#define USBH_OTGCSR_HNPCAP_Msk (0x01 << USBH_OTGCSR_HNPCAP_Pos) + + + + +typedef struct { + __IO uint32_t CFG; //JPEG DEC configure register + + __IO uint32_t CR; //JPEG DEC control register + + __IO uint32_t IR; //JPEG DEC interrupt register + + __IO uint32_t SR; //JPEG DEC status register + + __IO uint32_t IMGSIZ; //JPEG image size + + __IO uint32_t IMGSTR; //JPEG image size virtual stride + + __IO uint32_t CSBASE; //JPEG code-stream base address + + union { + __IO uint32_t YBASE; //YUV image Y base address + + __IO uint32_t RGBASE; //RGB image base address + }; + + __IO uint32_t UBASE; //YUV image U base address + + __IO uint32_t VBASE; //YUV image V base address + + __IO uint32_t QTBASE; //JPEG quantization table base address + + __IO uint32_t HTBASE; //JPEG huffman table base address + + __IO uint32_t CODLEN; //JPEG code stream total length in byte + + uint32_t RESERVED[51]; + + __O uint32_t QTABLE[3][16]; //Quantization table + + uint32_t RESERVED2[16]; + + struct { + __O uint32_t DC_CODEWORD[6]; + __O uint32_t DC_CODELEN[2]; + __O uint32_t DC_CODEVAL[2]; + + __O uint32_t AC_CODEWORD[8]; + __O uint32_t AC_CODEADDR[4]; + __O uint32_t AC_CODEVAL[41]; + + uint32_t RESERVED; + } HTABLE[2]; //Huffman table +} JPEG_TypeDef; + + +#define JPEG_CFG_SRCFMT_Pos 0 //JPEG Source Format, 0 YUV420(H2V2) 1 YUV422(H2V1) 2 YUV444(H1V1) +#define JPEG_CFG_SRCFMT_Msk (0x03 << JPEG_CFG_SRCFMT_Pos) +#define JPEG_CFG_SCANMOD_Pos 2 //JPEG scan mode, 0 interleaved (three components) 1 non-interleaved (single component) +#define JPEG_CFG_SCANMOD_Msk (0x01 << JPEG_CFG_SCANMOD_Pos) +#define JPEG_CFG_NISCOMP_Pos 3 //Non-Interleaved Scanning Component, 0 component 1 1 component 2 2 component 3 +#define JPEG_CFG_NISCOMP_Msk (0x03 << JPEG_CFG_NISCOMP_Pos) +#define JPEG_CFG_HT1COMP_Pos 5 //Huffman Table for Component 1, 0 table 0 1 table 1 +#define JPEG_CFG_HT1COMP_Msk (0x01 << JPEG_CFG_HT1COMP_Pos) +#define JPEG_CFG_HT2COMP_Pos 6 +#define JPEG_CFG_HT2COMP_Msk (0x01 << JPEG_CFG_HT2COMP_Pos) +#define JPEG_CFG_HT3COMP_Pos 7 +#define JPEG_CFG_HT3COMP_Msk (0x01 << JPEG_CFG_HT3COMP_Pos) +#define JPEG_CFG_QT1COMP_Pos 8 //Quantization Table for Component 1, 0 table 0 1 table 1 2 table 2 +#define JPEG_CFG_QT1COMP_Msk (0x03 << JPEG_CFG_QT1COMP_Pos) +#define JPEG_CFG_QT2COMP_Pos 10 +#define JPEG_CFG_QT2COMP_Msk (0x03 << JPEG_CFG_QT2COMP_Pos) +#define JPEG_CFG_QT3COMP_Pos 12 +#define JPEG_CFG_QT3COMP_Msk (0x03 << JPEG_CFG_QT3COMP_Pos) +#define JPEG_CFG_OUTFMT_Pos 14 //Image data output format, 0 YUV planar 1 YUV semi-planar 2 XRGB888 3 RGB888 4 RGB565 +#define JPEG_CFG_OUTFMT_Msk (0x07 << JPEG_CFG_OUTFMT_Pos) +#define JPEG_CFG_YUV2RGB_Pos 17 //YUV2RGB translation, 0 Disable 1 Enable +#define JPEG_CFG_YUV2RGB_Msk (0x01 << JPEG_CFG_YUV2RGB_Pos) +#define JPEG_CFG_UVSWAP_Pos 18 //UV output swap, 0 YUV 1 YVU +#define JPEG_CFG_UVSWAP_Msk (0x01 << JPEG_CFG_UVSWAP_Pos) +#define JPEG_CFG_RBSWAP_Pos 19 //RB output swap, 0 RGB 1 BGR +#define JPEG_CFG_RBSWAP_Msk (0x01 << JPEG_CFG_RBSWAP_Pos) +#define JPEG_CFG_EDSWAP_Pos 20 //endian swap, 0 XRGB 1 BGRX +#define JPEG_CFG_EDSWAP_Msk (0x01 << JPEG_CFG_EDSWAP_Pos) +#define JPEG_CFG_565DITH_Pos 21 //RGB565 dithering, 0 Disable 1 Enable +#define JPEG_CFG_565DITH_Msk (0x01 << JPEG_CFG_565DITH_Pos) + +#define JPEG_CR_START_Pos 0 //JPEG DEC frame start,解码完成自动清零 +#define JPEG_CR_START_Msk (0x01 << JPEG_CR_START_Pos) +#define JPEG_CR_RESTART_Pos 1 //Decoder stream buffering restart +#define JPEG_CR_RESTART_Msk (0x01 << JPEG_CR_RESTART_Pos) +#define JPEG_CR_RESET_Pos 3 //JPEG DEC core reset,自动清零 +#define JPEG_CR_RESET_Msk (0x01 << JPEG_CR_RESET_Pos) +#define JPEG_CR_REINTRV_Pos 4 //Restart interval marker enable +#define JPEG_CR_REINTRV_Msk (0x01 << JPEG_CR_REINTRV_Pos) +#define JPEG_CR_LASTBUF_Pos 5 //Decoder last stream buffering +#define JPEG_CR_LASTBUF_Msk (0x01 << JPEG_CR_LASTBUF_Pos) +#define JPEG_CR_QTAUTO_Pos 7 //JPEG quantization tables auto refresh enable +#define JPEG_CR_QTAUTO_Msk (0x01 << JPEG_CR_QTAUTO_Pos) +#define JPEG_CR_HTAUTO_Pos 8 //JPEG huffman tables auto refresh enable +#define JPEG_CR_HTAUTO_Msk (0x01 << JPEG_CR_HTAUTO_Pos) +#define JPEG_CR_QTCNT_Pos 9 //Number of quantization tables +#define JPEG_CR_QTCNT_Msk (0x03 << JPEG_CR_QTCNT_Pos) +#define JPEG_CR_HTCNT_Pos 11 //Number of huffman tables +#define JPEG_CR_HTCNT_Msk (0x01 << JPEG_CR_HTCNT_Pos) +#define JPEG_CR_CUCNT_Pos 12 //The number of CU in the restart interval +#define JPEG_CR_CUCNT_Msk (0xFFFF<<JPEG_CR_CUCNT_Pos) + +#define JPEG_IR_IEDONE_Pos 0 //Frame processing finish interrupt enable +#define JPEG_IR_IEDONE_Msk (0x01 << JPEG_IR_IEDONE_Pos) +#define JPEG_IR_IEEMPTY_Pos 2 //JPEG decoder stream buffering empty interrupt enable +#define JPEG_IR_IEEMPTY_Msk (0x01 << JPEG_IR_IEEMPTY_Pos) +#define JPEG_IR_IEERROR_Pos 3 //JPEG error interrupt enable +#define JPEG_IR_IEERROR_Msk (0x01 << JPEG_IR_IEERROR_Pos) +#define JPEG_IR_ICDONE_Pos 5 //Interrupt Clear, write-ongly +#define JPEG_IR_ICDONE_Msk (0x01 << JPEG_IR_ICDONE_Pos) +#define JPEG_IR_ICEMPTY_Pos 7 +#define JPEG_IR_ICEMPTY_Msk (0x01 << JPEG_IR_ICEMPTY_Pos) +#define JPEG_IR_ICERROR_Pos 8 +#define JPEG_IR_ICERROR_Msk (0x01 << JPEG_IR_ICERROR_Pos) +#define JPEG_IR_IFDONE_Pos 10 //Interrupt Flag, read-only +#define JPEG_IR_IFDONE_Msk (0x01 << JPEG_IR_IFDONE_Pos) +#define JPEG_IR_IFEMPTY_Pos 12 +#define JPEG_IR_IFEMPTY_Msk (0x01 << JPEG_IR_IFEMPTY_Pos) +#define JPEG_IR_IFERROR_Pos 13 +#define JPEG_IR_IFERROR_Msk (0x01 << JPEG_IR_IFERROR_Pos) + +#define JPEG_SR_BUSY_Pos 0 +#define JPEG_SR_BUSY_Msk (0x01 << JPEG_SR_BUSY_Pos) +#define JPEG_SR_CUOVR_Pos 1 //JPEG CU run length overflow error +#define JPEG_SR_CUOVR_Msk (0x01 << JPEG_SR_CUOVR_Pos) +#define JPEG_SR_REIMERR_Pos 2 //JPEG Restart interval marker error +#define JPEG_SR_REIMERR_Msk (0x01 << JPEG_SR_REIMERR_Pos) +#define JPEG_SR_BUFBUSY_Pos 4 //JPEG decoder stream buffering status +#define JPEG_SR_BUFBUSY_Msk (0x01 << JPEG_SR_BUFBUSY_Pos) +#define JPEG_SR_DMARDBUSY_Pos 5 +#define JPEG_SR_DMARDBUSY_Msk (0x01 << JPEG_SR_DMARDBUSY_Pos) +#define JPEG_SR_DMAWRBUSY_Pos 6 +#define JPEG_SR_DMAWRBUSY_Msk (0x01 << JPEG_SR_DMAWRBUSY_Pos) + +#define JPEG_IMGSIZ_HPIX_Pos 0 //JPEG image width (minus 1) +#define JPEG_IMGSIZ_HPIX_Msk (0x3FF<< JPEG_IMGSIZ_HPIX_Pos) +#define JPEG_IMGSIZ_VPIX_Pos 16 //JPEG image height (minus 1) +#define JPEG_IMGSIZ_VPIX_Msk (0x3FF<< JPEG_IMGSIZ_VPIX_Pos) + +#define JPEG_IMGSTR_RGBLINE_Pos 0 //number of words of RGB line width, XRGB888: img_width RGB888: ceil(img_width*3/4) RGB565 : ceil(img_width/2) +#define JPEG_IMGSTR_RGBLINE_Msk (0x7FF<< JPEG_IMGSTR_RGBLINE_Pos) +#define JPEG_IMGSTR_YLINE_Pos 0 //number of words of Y line width, ceil(img_width/4) +#define JPEG_IMGSTR_YLINE_Msk (0x7FF<< JPEG_IMGSTR_YLINE_Pos) +#define JPEG_IMGSTR_UVLINE_Pos 16 //number of words of UV line width, UV-planer 444: ceil(img_width/4) UV-planar 420/422: ceil(img_width/8) + // UV-semi planer 444: ceil(img_width/2) UV-semi planer 420/422: ceil(img_width/4) +#define JPEG_IMGSTR_UVLINE_Msk (0x7FF<< JPEG_IMGSTR_UVLINE_Pos) + + + + +/******************************************************************************/ +/* Peripheral memory map */ +/******************************************************************************/ +#define RAM_BASE 0x20000000 +#define AHB_BASE 0x40000000 +#define APB1_BASE 0x40040000 +#define APB2_BASE 0x400A0000 + +#define SFLASH_BASE 0x70000000 //Serial Flash + +#define SDRAMM_BASE 0x80000000 +#define SDRAMC_BASE 0x88000000 + + + +/* AHB Peripheral memory map */ +#define SYS_BASE (AHB_BASE + 0x00000) + +#define DMA_BASE (AHB_BASE + 0x00800) + +#define SDIO_BASE (AHB_BASE + 0x01800) + +#define LCD_BASE (AHB_BASE + 0x02000) + +#define CRC_BASE (AHB_BASE + 0x02800) + +#define CORDIC_BASE (AHB_BASE + 0x03000) + +#define DIV_BASE (AHB_BASE + 0x03800) + +#define GPIOM_BASE (AHB_BASE + 0x04000) +#define GPION_BASE (AHB_BASE + 0x04800) + +#define USBD_BASE (AHB_BASE + 0x05000) +#define USBH_BASE (AHB_BASE + 0x05000) + +#define JPEG_BASE (AHB_BASE + 0x0B000) +#define DMA2D_BASE (AHB_BASE + 0x0C000) + +/* APB Peripheral memory map */ +#define GPIOA_BASE (APB1_BASE + 0x00000) +#define GPIOB_BASE (APB1_BASE + 0x00800) +#define GPIOC_BASE (APB1_BASE + 0x01000) +#define GPIOD_BASE (APB1_BASE + 0x01800) + +#define UART0_BASE (APB1_BASE + 0x02000) +#define UART1_BASE (APB1_BASE + 0x02800) +#define UART2_BASE (APB1_BASE + 0x03000) +#define UART3_BASE (APB1_BASE + 0x03800) + +#define SPI0_BASE (APB1_BASE + 0x04000) +#define SPI1_BASE (APB1_BASE + 0x04800) + +#define PWM0_BASE (APB1_BASE + 0x06000) +#define PWM1_BASE (APB1_BASE + 0x06080) +#define PWM2_BASE (APB1_BASE + 0x06100) +#define PWM3_BASE (APB1_BASE + 0x06180) +#define PWM4_BASE (APB1_BASE + 0x06200) +#define PWMG_BASE (APB1_BASE + 0x06400) + +#define TIMR0_BASE (APB1_BASE + 0x06800) +#define TIMR1_BASE (APB1_BASE + 0x06840) +#define TIMR2_BASE (APB1_BASE + 0x06880) +#define TIMR3_BASE (APB1_BASE + 0x068C0) +#define TIMR4_BASE (APB1_BASE + 0x06900) +#define TIMRG_BASE (APB1_BASE + 0x06C00) + +#define BTIMR0_BASE (APB1_BASE + 0x08800) +#define BTIMR1_BASE (APB1_BASE + 0x08840) +#define BTIMR2_BASE (APB1_BASE + 0x08880) +#define BTIMR3_BASE (APB1_BASE + 0x088C0) +#define BTIMR4_BASE (APB1_BASE + 0x08900) +#define BTIMR5_BASE (APB1_BASE + 0x08940) +#define BTIMR6_BASE (APB1_BASE + 0x08980) +#define BTIMR7_BASE (APB1_BASE + 0x089C0) +#define BTIMR8_BASE (APB1_BASE + 0x08A00) +#define BTIMR9_BASE (APB1_BASE + 0x08A40) +#define BTIMR10_BASE (APB1_BASE + 0x08A80) +#define BTIMR11_BASE (APB1_BASE + 0x08AC0) +#define BTIMRG_BASE (APB1_BASE + 0x08C00) + +#define ADC0_BASE (APB1_BASE + 0x09000) +#define ADC1_BASE (APB1_BASE + 0x09800) + +#define FMC_BASE (APB1_BASE + 0x0A000) //Flash Memory Controller + +#define SFC_BASE (APB1_BASE + 0x0A800) //Serial Flash Controller + +#define RTC_BASE (APB1_BASE + 0x0B800) + +#define DAC_BASE (APB1_BASE + 0x0C000) + +#define QEI_BASE (APB1_BASE + 0x0C800) + +#define PORTA_BASE (APB2_BASE + 0x00000) +#define PORTB_BASE (APB2_BASE + 0x00010) +#define PORTC_BASE (APB2_BASE + 0x00020) +#define PORTD_BASE (APB2_BASE + 0x00030) +#define PORTE_BASE (APB2_BASE + 0x00040) +#define PORTM_BASE (APB2_BASE + 0x00080) +#define PORTN_BASE (APB2_BASE + 0x00090) + +#define WDT_BASE (APB2_BASE + 0x00800) + +#define GPIOE_BASE (APB2_BASE + 0x01000) + +#define I2C0_BASE (APB2_BASE + 0x06000) +#define I2C1_BASE (APB2_BASE + 0x06800) + +#define CAN0_BASE (APB2_BASE + 0x08000) +#define CAN1_BASE (APB2_BASE + 0x08800) + + + +/******************************************************************************/ +/* Peripheral declaration */ +/******************************************************************************/ +#define SYS ((SYS_TypeDef *) SYS_BASE) + +#define PORTA ((PORT_TypeDef *) PORTA_BASE) +#define PORTB ((PORT_TypeDef *) PORTB_BASE) +#define PORTC ((PORT_TypeDef *) PORTC_BASE) +#define PORTD ((PORT_TypeDef *) PORTD_BASE) +#define PORTE ((PORT_TypeDef *) PORTE_BASE) +#define PORTM ((PORT_TypeDef *) PORTM_BASE) +#define PORTN ((PORT_TypeDef *) PORTN_BASE) + +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOM ((GPIO_TypeDef *) GPIOM_BASE) +#define GPION ((GPIO_TypeDef *) GPION_BASE) + +#define TIMR0 ((TIMR_TypeDef *) TIMR0_BASE) +#define TIMR1 ((TIMR_TypeDef *) TIMR1_BASE) +#define TIMR2 ((TIMR_TypeDef *) TIMR2_BASE) +#define TIMR3 ((TIMR_TypeDef *) TIMR3_BASE) +#define TIMR4 ((TIMR_TypeDef *) TIMR4_BASE) +#define TIMRG ((TIMRG_TypeDef*) TIMRG_BASE) + +#define BTIMR0 ((TIMR_TypeDef *) BTIMR0_BASE) +#define BTIMR1 ((TIMR_TypeDef *) BTIMR1_BASE) +#define BTIMR2 ((TIMR_TypeDef *) BTIMR2_BASE) +#define BTIMR3 ((TIMR_TypeDef *) BTIMR3_BASE) +#define BTIMR4 ((TIMR_TypeDef *) BTIMR4_BASE) +#define BTIMR5 ((TIMR_TypeDef *) BTIMR5_BASE) +#define BTIMR6 ((TIMR_TypeDef *) BTIMR6_BASE) +#define BTIMR7 ((TIMR_TypeDef *) BTIMR7_BASE) +#define BTIMR8 ((TIMR_TypeDef *) BTIMR8_BASE) +#define BTIMR9 ((TIMR_TypeDef *) BTIMR9_BASE) +#define BTIMR10 ((TIMR_TypeDef *) BTIMR10_BASE) +#define BTIMR11 ((TIMR_TypeDef *) BTIMR11_BASE) +#define BTIMRG ((TIMRG_TypeDef*) BTIMRG_BASE) + +#define UART0 ((UART_TypeDef *) UART0_BASE) +#define UART1 ((UART_TypeDef *) UART1_BASE) +#define UART2 ((UART_TypeDef *) UART2_BASE) +#define UART3 ((UART_TypeDef *) UART3_BASE) + +#define SPI0 ((SPI_TypeDef *) SPI0_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) + +#define I2C0 ((I2C_TypeDef *) I2C0_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) + +#define ADC0 ((ADC_TypeDef *) ADC0_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) + +#define PWM0 ((PWM_TypeDef *) PWM0_BASE) +#define PWM1 ((PWM_TypeDef *) PWM1_BASE) +#define PWM2 ((PWM_TypeDef *) PWM2_BASE) +#define PWM3 ((PWM_TypeDef *) PWM3_BASE) +#define PWM4 ((PWM_TypeDef *) PWM4_BASE) +#define PWMG ((PWMG_TypeDef *) PWMG_BASE) + +#define CAN0 ((CAN_TypeDef *) CAN0_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) + +#define USBD ((USBD_TypeDef *) USBD_BASE) +#define USBH ((USBH_TypeDef *) USBH_BASE) + +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) + +#define SDRAMC ((SDRAMC_TypeDef*)SDRAMC_BASE) + +#define DMA ((DMA_TypeDef *) DMA_BASE) + +#define LCD ((LCD_TypeDef *) LCD_BASE) + +#define DMA2D ((DMA2D_TypeDef*) DMA2D_BASE) + +#define DAC ((DAC_TypeDef *) DAC_BASE) + +#define CRC ((CRC_TypeDef *) CRC_BASE) + +#define CORDIC ((CORDIC_TypeDef*)CORDIC_BASE) + +#define DIV ((DIV_TypeDef *) DIV_BASE) + +#define RTC ((RTC_TypeDef *) RTC_BASE) + +#define WDT ((WDT_TypeDef *) WDT_BASE) + +#define QEI ((QEI_TypeDef *) QEI_BASE) + +#define FMC ((FMC_TypeDef *) FMC_BASE) + +#define SFC ((SFC_TypeDef *) SFC_BASE) + +#define JPEG ((JPEG_TypeDef *) JPEG_BASE) + + + +#include "SWM341_port.h" +#include "SWM341_gpio.h" +#include "SWM341_exti.h" +#include "SWM341_timr.h" +#include "SWM341_uart.h" +#include "SWM341_spi.h" +#include "SWM341_i2c.h" +#include "SWM341_adc.h" +#include "SWM341_pwm.h" +#include "SWM341_dma.h" +#include "SWM341_can.h" +#include "SWM341_sdio.h" +#include "SWM341_sdram.h" +#include "SWM341_flash.h" +#include "SWM341_lcd.h" +#include "SWM341_sfc.h" +#include "SWM341_dac.h" +#include "SWM341_cordic.h" +#include "SWM341_crc.h" +#include "SWM341_div.h" +#include "SWM341_rtc.h" +#include "SWM341_wdt.h" +#include "SWM341_qei.h" +#include "SWM341_usb.h" +#include "SWM341_usbd.h" +#include "SWM341_usbh.h" +#include "SWM341_jpeg.h" +#include "SWM341_dma2d.h" +#include "SWM341_iofilt.h" + + +#ifdef SW_LOG_RTT +#define log_printf(...) SEGGER_RTT_printf(0, __VA_ARGS__) +#else +#define log_printf(...) printf(__VA_ARGS__) +#endif + + +#ifndef SW_LOG_LEVEL +#define SW_LOG_LEVEL 0 +#endif + +#if (SW_LOG_LEVEL > 0) +#define SW_LOG_ERR(...) { \ + log_printf("ERROR: "); \ + log_printf(__VA_ARGS__); \ + log_printf("\n"); \ + } + +#if (SW_LOG_LEVEL > 1) +#define SW_LOG_WARN(...) { \ + log_printf("WARN : "); \ + log_printf(__VA_ARGS__); \ + log_printf("\n"); \ + } + +#if (SW_LOG_LEVEL > 2) +#define SW_LOG_INFO(...) { \ + log_printf("INFO : "); \ + log_printf(__VA_ARGS__); \ + log_printf("\n"); \ + } +#else +#define SW_LOG_INFO(...) +#endif + +#else +#define SW_LOG_WARN(...) +#define SW_LOG_INFO(...) +#endif + +#else +#define SW_LOG_ERR(...) +#define SW_LOG_WARN(...) +#define SW_LOG_INFO(...) +#endif + + +#endif //__SWM341_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/arm/startup_SWM341.s b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/arm/startup_SWM341.s new file mode 100644 index 0000000000..c045116a49 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/arm/startup_SWM341.s @@ -0,0 +1,710 @@ +;****************************************************************************************************************************************** +; 文件名称: startup_SWM341.s +; 功能说明: SWM341单片机的启动文件 +; 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +; 注意事项: +; 版本日期: V1.1.0 2017年10月25日 +; 升级记录: +; +; +;****************************************************************************************************************************************** +; @attention +; +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +; REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +; FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +; OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +; -ECTION WITH THEIR PRODUCTS. +; +; COPYRIGHT 2012 Synwit Technology +;****************************************************************************************************************************************** + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; <h> Stack Configuration +; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Stack_Size EQU 0x00004000 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; <h> Heap Configuration +; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; </h> + +Heap_Size EQU 0x00000000 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD UART0_Handler + DCD UART1_Handler + DCD TIMR0_Handler + DCD TIMR1_Handler + DCD DMA_Handler + DCD SPI0_Handler + DCD PWM0_Handler + DCD WDT_Handler + DCD UART2_Handler + DCD PWM1_Handler + DCD ADC0_Handler + DCD BTIMR0_Handler + DCD HALL0_Handler + DCD PWM2_Handler + DCD PWMBRK_Handler + DCD I2C0_Handler + DCD CAN0_Handler + DCD SPI1_Handler + DCD RTC_Handler + DCD PWM3_Handler + DCD TIMR2_Handler + DCD UART3_Handler + DCD TIMR3_Handler + DCD ADC1_Handler + DCD BOD_Handler + DCD CORDIC_Handler + DCD BTIMR1_Handler + DCD PWM4_Handler + DCD HALL3_Handler + DCD BTIMR2_Handler + DCD I2C1_Handler + DCD BTIMR3_Handler + DCD ACMP_Handler + DCD XTALSTOP_Handler + DCD FSPI_Handler + DCD GPIOA_Handler + DCD GPIOB_Handler + DCD GPIOC_Handler + DCD GPIOD_Handler + DCD GPIOM_Handler + DCD GPION_Handler + DCD GPIOA0_Handler + DCD GPIOA1_Handler + DCD GPIOA5_Handler + DCD GPIOA6_Handler + DCD GPIOA10_Handler + DCD GPIOA11_Handler + DCD GPIOA12_Handler + DCD GPIOA13_Handler + DCD GPIOB0_Handler + DCD GPIOB1_Handler + DCD GPIOB2_Handler + DCD GPIOC0_Handler + DCD GPIOC1_Handler + DCD GPIOC2_Handler + DCD GPIOC3_Handler + DCD GPIOC4_Handler + DCD GPIOD3_Handler + DCD GPIOD4_Handler + DCD GPIOD5_Handler + DCD GPIOD6_Handler + DCD GPIOD7_Handler + DCD GPIOD8_Handler + DCD GPIOC9_Handler + DCD GPIOC10_Handler + DCD GPIOC11_Handler + DCD GPIOC12_Handler + DCD GPIOM0_Handler + DCD GPIOM1_Handler + DCD GPIOM2_Handler + DCD GPIOM3_Handler + DCD GPIOM4_Handler + DCD DIV_Handler + DCD LCD_Handler + DCD GPIOE_Handler + DCD JPEG_Handler + DCD SDIO_Handler + DCD USB_Handler + DCD CAN1_Handler + DCD TIMR4_Handler + DCD BTIMR4_Handler + DCD BTIMR5_Handler + DCD BTIMR6_Handler + DCD BTIMR7_Handler + DCD BTIMR8_Handler + DCD BTIMR9_Handler + DCD BTIMR10_Handler + DCD BTIMR11_Handler + DCD DMA2D_Handler + DCD QEI_Handler + +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + + + AREA |.text|, CODE, READONLY + + +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT FPU_Enable + LDR R0, =FPU_Enable + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP + +HardFault_Handler PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP + +MemManage_Handler PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP + +BusFault_Handler PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP + +UsageFault_Handler PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP + +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP + +DebugMon_Handler PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP + +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP + +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +UART0_Handler PROC + EXPORT UART0_Handler [WEAK] + B . + ENDP + +UART1_Handler PROC + EXPORT UART1_Handler [WEAK] + B . + ENDP + +TIMR0_Handler PROC + EXPORT TIMR0_Handler [WEAK] + B . + ENDP + +TIMR1_Handler PROC + EXPORT TIMR1_Handler [WEAK] + B . + ENDP + +DMA_Handler PROC + EXPORT DMA_Handler [WEAK] + B . + ENDP + +SPI0_Handler PROC + EXPORT SPI0_Handler [WEAK] + B . + ENDP + +PWM0_Handler PROC + EXPORT PWM0_Handler [WEAK] + B . + ENDP + +WDT_Handler PROC + EXPORT WDT_Handler [WEAK] + B . + ENDP + +UART2_Handler PROC + EXPORT UART2_Handler [WEAK] + B . + ENDP + +PWM1_Handler PROC + EXPORT PWM1_Handler [WEAK] + B . + ENDP + +ADC0_Handler PROC + EXPORT ADC0_Handler [WEAK] + B . + ENDP + +BTIMR0_Handler PROC + EXPORT BTIMR0_Handler [WEAK] + B . + ENDP + +HALL0_Handler PROC + EXPORT HALL0_Handler [WEAK] + B . + ENDP + +PWM2_Handler PROC + EXPORT PWM2_Handler [WEAK] + B . + ENDP + +PWMBRK_Handler PROC + EXPORT PWMBRK_Handler [WEAK] + B . + ENDP + +I2C0_Handler PROC + EXPORT I2C0_Handler [WEAK] + B . + ENDP + +CAN0_Handler PROC + EXPORT CAN0_Handler [WEAK] + B . + ENDP + +SPI1_Handler PROC + EXPORT SPI1_Handler [WEAK] + B . + ENDP + +RTC_Handler PROC + EXPORT RTC_Handler [WEAK] + B . + ENDP + +PWM3_Handler PROC + EXPORT PWM3_Handler [WEAK] + B . + ENDP + +TIMR2_Handler PROC + EXPORT TIMR2_Handler [WEAK] + B . + ENDP + +UART3_Handler PROC + EXPORT UART3_Handler [WEAK] + B . + ENDP + +TIMR3_Handler PROC + EXPORT TIMR3_Handler [WEAK] + B . + ENDP + +ADC1_Handler PROC + EXPORT ADC1_Handler [WEAK] + B . + ENDP + +BOD_Handler PROC + EXPORT BOD_Handler [WEAK] + B . + ENDP + +CORDIC_Handler PROC + EXPORT CORDIC_Handler [WEAK] + B . + ENDP + +BTIMR1_Handler PROC + EXPORT BTIMR1_Handler [WEAK] + B . + ENDP + +PWM4_Handler PROC + EXPORT PWM4_Handler [WEAK] + B . + ENDP + +HALL3_Handler PROC + EXPORT HALL3_Handler [WEAK] + B . + ENDP + +BTIMR2_Handler PROC + EXPORT BTIMR2_Handler [WEAK] + B . + ENDP + +I2C1_Handler PROC + EXPORT I2C1_Handler [WEAK] + B . + ENDP + +BTIMR3_Handler PROC + EXPORT BTIMR3_Handler [WEAK] + B . + ENDP + +ACMP_Handler PROC + EXPORT ACMP_Handler [WEAK] + B . + ENDP + +XTALSTOP_Handler PROC + EXPORT XTALSTOP_Handler [WEAK] + B . + ENDP + +FSPI_Handler PROC + EXPORT FSPI_Handler [WEAK] + B . + ENDP + +GPIOA_Handler PROC + EXPORT GPIOA_Handler [WEAK] + B . + ENDP + +GPIOB_Handler PROC + EXPORT GPIOB_Handler [WEAK] + B . + ENDP + +GPIOC_Handler PROC + EXPORT GPIOC_Handler [WEAK] + B . + ENDP + +GPIOD_Handler PROC + EXPORT GPIOD_Handler [WEAK] + B . + ENDP + +GPIOM_Handler PROC + EXPORT GPIOM_Handler [WEAK] + B . + ENDP + +GPION_Handler PROC + EXPORT GPION_Handler [WEAK] + B . + ENDP + +GPIOA0_Handler PROC + EXPORT GPIOA0_Handler [WEAK] + B . + ENDP + +GPIOA1_Handler PROC + EXPORT GPIOA1_Handler [WEAK] + B . + ENDP + +GPIOA5_Handler PROC + EXPORT GPIOA5_Handler [WEAK] + B . + ENDP + +GPIOA6_Handler PROC + EXPORT GPIOA6_Handler [WEAK] + B . + ENDP + +GPIOA10_Handler PROC + EXPORT GPIOA10_Handler [WEAK] + B . + ENDP + +GPIOA11_Handler PROC + EXPORT GPIOA11_Handler [WEAK] + B . + ENDP + +GPIOA12_Handler PROC + EXPORT GPIOA12_Handler [WEAK] + B . + ENDP + +GPIOA13_Handler PROC + EXPORT GPIOA13_Handler [WEAK] + B . + ENDP + +GPIOB0_Handler PROC + EXPORT GPIOB0_Handler [WEAK] + B . + ENDP + +GPIOB1_Handler PROC + EXPORT GPIOB1_Handler [WEAK] + B . + ENDP + +GPIOB2_Handler PROC + EXPORT GPIOB2_Handler [WEAK] + B . + ENDP + +GPIOC0_Handler PROC + EXPORT GPIOC0_Handler [WEAK] + B . + ENDP + +GPIOC1_Handler PROC + EXPORT GPIOC1_Handler [WEAK] + B . + ENDP + +GPIOC2_Handler PROC + EXPORT GPIOC2_Handler [WEAK] + B . + ENDP + +GPIOC3_Handler PROC + EXPORT GPIOC3_Handler [WEAK] + B . + ENDP + +GPIOC4_Handler PROC + EXPORT GPIOC4_Handler [WEAK] + B . + ENDP + +GPIOD3_Handler PROC + EXPORT GPIOD3_Handler [WEAK] + B . + ENDP + +GPIOD4_Handler PROC + EXPORT GPIOD4_Handler [WEAK] + B . + ENDP + +GPIOD5_Handler PROC + EXPORT GPIOD5_Handler [WEAK] + B . + ENDP + +GPIOD6_Handler PROC + EXPORT GPIOD6_Handler [WEAK] + B . + ENDP + +GPIOD7_Handler PROC + EXPORT GPIOD7_Handler [WEAK] + B . + ENDP + +GPIOD8_Handler PROC + EXPORT GPIOD8_Handler [WEAK] + B . + ENDP + +GPIOC9_Handler PROC + EXPORT GPIOC9_Handler [WEAK] + B . + ENDP + +GPIOC10_Handler PROC + EXPORT GPIOC10_Handler [WEAK] + B . + ENDP + +GPIOC11_Handler PROC + EXPORT GPIOC11_Handler [WEAK] + B . + ENDP + +GPIOC12_Handler PROC + EXPORT GPIOC12_Handler [WEAK] + B . + ENDP + +GPIOM0_Handler PROC + EXPORT GPIOM0_Handler [WEAK] + B . + ENDP + +GPIOM1_Handler PROC + EXPORT GPIOM1_Handler [WEAK] + B . + ENDP + +GPIOM2_Handler PROC + EXPORT GPIOM2_Handler [WEAK] + B . + ENDP + +GPIOM3_Handler PROC + EXPORT GPIOM3_Handler [WEAK] + B . + ENDP + +GPIOM4_Handler PROC + EXPORT GPIOM4_Handler [WEAK] + B . + ENDP + +DIV_Handler PROC + EXPORT DIV_Handler [WEAK] + B . + ENDP + +LCD_Handler PROC + EXPORT LCD_Handler [WEAK] + B . + ENDP + +GPIOE_Handler PROC + EXPORT GPIOE_Handler [WEAK] + B . + ENDP + +JPEG_Handler PROC + EXPORT JPEG_Handler [WEAK] + B . + ENDP + +SDIO_Handler PROC + EXPORT SDIO_Handler [WEAK] + B . + ENDP + +USB_Handler PROC + EXPORT USB_Handler [WEAK] + B . + ENDP + +CAN1_Handler PROC + EXPORT CAN1_Handler [WEAK] + B . + ENDP + +TIMR4_Handler PROC + EXPORT TIMR4_Handler [WEAK] + B . + ENDP + +BTIMR4_Handler PROC + EXPORT BTIMR4_Handler [WEAK] + B . + ENDP + +BTIMR5_Handler PROC + EXPORT BTIMR5_Handler [WEAK] + B . + ENDP + +BTIMR6_Handler PROC + EXPORT BTIMR6_Handler [WEAK] + B . + ENDP + +BTIMR7_Handler PROC + EXPORT BTIMR7_Handler [WEAK] + B . + ENDP + +BTIMR8_Handler PROC + EXPORT BTIMR8_Handler [WEAK] + B . + ENDP + +BTIMR9_Handler PROC + EXPORT BTIMR9_Handler [WEAK] + B . + ENDP + +BTIMR10_Handler PROC + EXPORT BTIMR10_Handler [WEAK] + B . + ENDP + +BTIMR11_Handler PROC + EXPORT BTIMR11_Handler [WEAK] + B . + ENDP + +DMA2D_Handler PROC + EXPORT DMA2D_Handler [WEAK] + B . + ENDP + +QEI_Handler PROC + EXPORT QEI_Handler [WEAK] + B . + ENDP + + ALIGN + + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, = (Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/gcc/startup_SWM341.s b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/gcc/startup_SWM341.s new file mode 100644 index 0000000000..c51dcaf464 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/gcc/startup_SWM341.s @@ -0,0 +1,515 @@ + .syntax unified + .cpu cortex-m33 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler +.extern FPU_Enable +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Call the clock system initialization function.*/ + bl FPU_Enable + +/* Copy the data segment initializers from flash to SRAM */ + ldr r0, =_sdata + ldr r1, =_edata + ldr r2, =_sidata + movs r3, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r4, [r2, r3] + str r4, [r0, r3] + adds r3, r3, #4 + +LoopCopyDataInit: + adds r4, r0, r3 + cmp r4, r1 + bcc CopyDataInit +/* Zero fill the bss segment. */ + ldr r2, =_sbss + ldr r4, =_ebss + movs r3, #0 + b LoopFillZerobss + +FillZerobss: + str r3, [r2] + adds r2, r2, #4 + +LoopFillZerobss: + cmp r2, r4 + bcc FillZerobss + +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl entry + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word UART0_Handler + .word UART1_Handler + .word TIMR0_Handler + .word TIMR1_Handler + .word DMA_Handler + .word SPI0_Handler + .word PWM0_Handler + .word WDT_Handler + .word UART2_Handler + .word PWM1_Handler + .word ADC0_Handler + .word BTIMR0_Handler + .word HALL0_Handler + .word PWM2_Handler + .word PWMBRK_Handler + .word I2C0_Handler + .word CAN0_Handler + .word SPI1_Handler + .word RTC_Handler + .word PWM3_Handler + .word TIMR2_Handler + .word UART3_Handler + .word TIMR3_Handler + .word ADC1_Handler + .word BOD_Handler + .word CORDIC_Handler + .word BTIMR1_Handler + .word PWM4_Handler + .word HALL3_Handler + .word BTIMR2_Handler + .word I2C1_Handler + .word BTIMR3_Handler + .word ACMP_Handler + .word XTALSTOP_Handler + .word FSPI_Handler + .word GPIOA_Handler + .word GPIOB_Handler + .word GPIOC_Handler + .word GPIOD_Handler + .word GPIOM_Handler + .word GPION_Handler + .word GPIOA0_Handler + .word GPIOA1_Handler + .word GPIOA5_Handler + .word GPIOA6_Handler + .word GPIOA10_Handler + .word GPIOA11_Handler + .word GPIOA12_Handler + .word GPIOA13_Handler + .word GPIOB0_Handler + .word GPIOB1_Handler + .word GPIOB2_Handler + .word GPIOC0_Handler + .word GPIOC1_Handler + .word GPIOC2_Handler + .word GPIOC3_Handler + .word GPIOC4_Handler + .word GPIOD3_Handler + .word GPIOD4_Handler + .word GPIOD5_Handler + .word GPIOD6_Handler + .word GPIOD7_Handler + .word GPIOD8_Handler + .word GPIOC9_Handler + .word GPIOC10_Handler + .word GPIOC11_Handler + .word GPIOC12_Handler + .word GPIOM0_Handler + .word GPIOM1_Handler + .word GPIOM2_Handler + .word GPIOM3_Handler + .word GPIOM4_Handler + .word DIV_Handler + .word LCD_Handler + .word GPIOE_Handler + .word JPEG_Handler + .word SDIO_Handler + .word USB_Handler + .word CAN1_Handler + .word TIMR4_Handler + .word BTIMR4_Handler + .word BTIMR5_Handler + .word BTIMR6_Handler + .word BTIMR7_Handler + .word BTIMR8_Handler + .word BTIMR9_Handler + .word BTIMR10_Handler + .word BTIMR11_Handler + .word DMA2D_Handler + .word QEI_Handler + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak UART0_Handler + .thumb_set UART0_Handler,Default_Handler + + .weak UART1_Handler + .thumb_set UART1_Handler,Default_Handler + + .weak TIMR0_Handler + .thumb_set TIMR0_Handler,Default_Handler + + .weak TIMR1_Handler + .thumb_set TIMR1_Handler,Default_Handler + + .weak DMA_Handler + .thumb_set DMA_Handler,Default_Handler + + .weak SPI0_Handler + .thumb_set SPI0_Handler,Default_Handler + + .weak PWM0_Handler + .thumb_set PWM0_Handler,Default_Handler + + .weak WDT_Handler + .thumb_set WDT_Handler,Default_Handler + + .weak UART2_Handler + .thumb_set UART2_Handler,Default_Handler + + .weak PWM1_Handler + .thumb_set PWM1_Handler,Default_Handler + + .weak ADC0_Handler + .thumb_set ADC0_Handler,Default_Handler + + .weak BTIMR0_Handler + .thumb_set BTIMR0_Handler,Default_Handler + + .weak HALL0_Handler + .thumb_set HALL0_Handler,Default_Handler + + .weak PWM2_Handler + .thumb_set PWM2_Handler,Default_Handler + + .weak PWMBRK_Handler + .thumb_set PWMBRK_Handler,Default_Handler + + .weak I2C0_Handler + .thumb_set I2C0_Handler,Default_Handler + + .weak CAN0_Handler + .thumb_set CAN0_Handler,Default_Handler + + .weak SPI1_Handler + .thumb_set SPI1_Handler,Default_Handler + + .weak RTC_Handler + .thumb_set RTC_Handler,Default_Handler + + .weak PWM3_Handler + .thumb_set PWM3_Handler,Default_Handler + + .weak TIMR2_Handler + .thumb_set TIMR2_Handler,Default_Handler + + .weak UART3_Handler + .thumb_set UART3_Handler,Default_Handler + + .weak TIMR3_Handler + .thumb_set TIMR3_Handler,Default_Handler + + .weak ADC1_Handler + .thumb_set ADC1_Handler,Default_Handler + + .weak BOD_Handler + .thumb_set BOD_Handler,Default_Handler + + .weak CORDIC_Handler + .thumb_set CORDIC_Handler,Default_Handler + + .weak BTIMR1_Handler + .thumb_set BTIMR1_Handler,Default_Handler + + .weak PWM4_Handler + .thumb_set PWM4_Handler,Default_Handler + + .weak HALL3_Handler + .thumb_set HALL3_Handler,Default_Handler + + .weak BTIMR2_Handler + .thumb_set BTIMR2_Handler,Default_Handler + + .weak I2C1_Handler + .thumb_set I2C1_Handler,Default_Handler + + .weak BTIMR3_Handler + .thumb_set BTIMR3_Handler,Default_Handler + + .weak ACMP_Handler + .thumb_set ACMP_Handler,Default_Handler + + .weak XTALSTOP_Handler + .thumb_set XTALSTOP_Handler,Default_Handler + + .weak FSPI_Handler + .thumb_set FSPI_Handler,Default_Handler + + .weak GPIOA_Handler + .thumb_set GPIOA_Handler,Default_Handler + + .weak GPIOB_Handler + .thumb_set GPIOB_Handler,Default_Handler + + .weak GPIOC_Handler + .thumb_set GPIOC_Handler,Default_Handler + + .weak GPIOD_Handler + .thumb_set GPIOD_Handler,Default_Handler + + .weak GPIOM_Handler + .thumb_set GPIOM_Handler,Default_Handler + + .weak GPION_Handler + .thumb_set GPION_Handler,Default_Handler + + .weak GPIOA0_Handler + .thumb_set GPIOA0_Handler,Default_Handler + + .weak GPIOA1_Handler + .thumb_set GPIOA1_Handler,Default_Handler + + .weak GPIOA5_Handler + .thumb_set GPIOA5_Handler,Default_Handler + + .weak GPIOA6_Handler + .thumb_set GPIOA6_Handler,Default_Handler + + .weak GPIOA10_Handler + .thumb_set GPIOA10_Handler,Default_Handler + + .weak GPIOA11_Handler + .thumb_set GPIOA11_Handler,Default_Handler + + .weak GPIOA12_Handler + .thumb_set GPIOA12_Handler,Default_Handler + + .weak GPIOA13_Handler + .thumb_set GPIOA13_Handler,Default_Handler + + .weak GPIOB0_Handler + .thumb_set GPIOB0_Handler,Default_Handler + + .weak GPIOB1_Handler + .thumb_set GPIOB1_Handler,Default_Handler + + .weak GPIOB2_Handler + .thumb_set GPIOB2_Handler,Default_Handler + + .weak GPIOC0_Handler + .thumb_set GPIOC0_Handler,Default_Handler + + .weak GPIOC1_Handler + .thumb_set GPIOC1_Handler,Default_Handler + + .weak GPIOC2_Handler + .thumb_set GPIOC2_Handler,Default_Handler + + .weak GPIOC3_Handler + .thumb_set GPIOC3_Handler,Default_Handler + + .weak GPIOC4_Handler + .thumb_set GPIOC4_Handler,Default_Handler + + .weak GPIOD3_Handler + .thumb_set GPIOD3_Handler,Default_Handler + + .weak GPIOD4_Handler + .thumb_set GPIOD4_Handler,Default_Handler + + .weak GPIOD5_Handler + .thumb_set GPIOD5_Handler,Default_Handler + + .weak GPIOD6_Handler + .thumb_set GPIOD6_Handler,Default_Handler + + .weak GPIOD7_Handler + .thumb_set GPIOD7_Handler,Default_Handler + + .weak GPIOD8_Handler + .thumb_set GPIOD8_Handler,Default_Handler + + .weak GPIOC9_Handler + .thumb_set GPIOC9_Handler,Default_Handler + + .weak GPIOC10_Handler + .thumb_set GPIOC10_Handler,Default_Handler + + .weak GPIOC11_Handler + .thumb_set GPIOC11_Handler,Default_Handler + + .weak GPIOC12_Handler + .thumb_set GPIOC12_Handler,Default_Handler + + .weak GPIOM0_Handler + .thumb_set GPIOM0_Handler,Default_Handler + + .weak GPIOM1_Handler + .thumb_set GPIOM1_Handler,Default_Handler + + .weak GPIOM2_Handler + .thumb_set GPIOM2_Handler,Default_Handler + + .weak GPIOM3_Handler + .thumb_set GPIOM3_Handler,Default_Handler + + .weak GPIOM4_Handler + .thumb_set GPIOM4_Handler,Default_Handler + + .weak DIV_Handler + .thumb_set DIV_Handler,Default_Handler + + .weak LCD_Handler + .thumb_set LCD_Handler,Default_Handler + + .weak GPIOE_Handler + .thumb_set GPIOE_Handler,Default_Handler + + .weak JPEG_Handler + .thumb_set JPEG_Handler,Default_Handler + + .weak SDIO_Handler + .thumb_set SDIO_Handler,Default_Handler + + .weak USB_Handler + .thumb_set USB_Handler,Default_Handler + + .weak CAN1_Handler + .thumb_set CAN1_Handler,Default_Handler + + .weak TIMR4_Handler + .thumb_set TIMR4_Handler,Default_Handler + + .weak BTIMR4_Handler + .thumb_set BTIMR4_Handler,Default_Handler + + .weak BTIMR5_Handler + .thumb_set BTIMR5_Handler,Default_Handler + + .weak BTIMR6_Handler + .thumb_set BTIMR6_Handler,Default_Handler + + .weak BTIMR7_Handler + .thumb_set BTIMR7_Handler,Default_Handler + + .weak BTIMR8_Handler + .thumb_set BTIMR8_Handler,Default_Handler + + .weak BTIMR9_Handler + .thumb_set BTIMR9_Handler,Default_Handler + + .weak BTIMR10_Handler + .thumb_set BTIMR10_Handler,Default_Handler + + .weak BTIMR11_Handler + .thumb_set BTIMR11_Handler,Default_Handler + + .weak DMA2D_Handler + .thumb_set DMA2D_Handler,Default_Handler + + .weak QEI_Handler + .thumb_set QEI_Handler,Default_Handler +
\ No newline at end of file diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/iar/startup_SWM341.s b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/iar/startup_SWM341.s new file mode 100644 index 0000000000..563a25a24f --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/startup/iar/startup_SWM341.s @@ -0,0 +1,648 @@ +;****************************************************************************************************************************************** +; 文件名称: startup_SWM341.s +; 功能说明: SWM341单片机的启动文件 +; 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +; 注意事项: +; 版本日期: V1.0.0 2019年5月30日 +; 升级记录: +; +; +;****************************************************************************************************************************************** +; @attention +; +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +; REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +; FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +; OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +; -ECTION WITH THEIR PRODUCTS. +; +; COPYRIGHT 2012 Synwit Technology +;****************************************************************************************************************************************** + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD UART0_Handler + DCD UART1_Handler + DCD TIMR0_Handler + DCD TIMR1_Handler + DCD DMA_Handler + DCD SPI0_Handler + DCD PWM0_Handler + DCD WDT_Handler + DCD UART2_Handler + DCD PWM1_Handler + DCD ADC0_Handler + DCD BTIMR0_Handler + DCD HALL0_Handler + DCD PWM2_Handler + DCD PWMBRK_Handler + DCD I2C0_Handler + DCD CAN0_Handler + DCD SPI1_Handler + DCD RTC_Handler + DCD PWM3_Handler + DCD TIMR2_Handler + DCD UART3_Handler + DCD TIMR3_Handler + DCD ADC1_Handler + DCD BOD_Handler + DCD CORDIC_Handler + DCD BTIMR1_Handler + DCD PWM4_Handler + DCD HALL3_Handler + DCD BTIMR2_Handler + DCD I2C1_Handler + DCD BTIMR3_Handler + DCD ACMP_Handler + DCD XTALSTOP_Handler + DCD FSPI_Handler + DCD GPIOA_Handler + DCD GPIOB_Handler + DCD GPIOC_Handler + DCD GPIOD_Handler + DCD GPIOM_Handler + DCD GPION_Handler + DCD GPIOA0_Handler + DCD GPIOA1_Handler + DCD GPIOA5_Handler + DCD GPIOA6_Handler + DCD GPIOA10_Handler + DCD GPIOA11_Handler + DCD GPIOA12_Handler + DCD GPIOA13_Handler + DCD GPIOB0_Handler + DCD GPIOB1_Handler + DCD GPIOB2_Handler + DCD GPIOC0_Handler + DCD GPIOC1_Handler + DCD GPIOC2_Handler + DCD GPIOC3_Handler + DCD GPIOC4_Handler + DCD GPIOD3_Handler + DCD GPIOD4_Handler + DCD GPIOD5_Handler + DCD GPIOD6_Handler + DCD GPIOD7_Handler + DCD GPIOD8_Handler + DCD GPIOC9_Handler + DCD GPIOC10_Handler + DCD GPIOC11_Handler + DCD GPIOC12_Handler + DCD GPIOM0_Handler + DCD GPIOM1_Handler + DCD GPIOM2_Handler + DCD GPIOM3_Handler + DCD GPIOM4_Handler + DCD DIV_Handler + DCD LCD_Handler + DCD GPIOE_Handler + DCD JPEG_Handler + DCD SDIO_Handler + DCD USB_Handler + DCD CAN1_Handler + DCD TIMR4_Handler + DCD BTIMR4_Handler + DCD BTIMR5_Handler + DCD BTIMR6_Handler + DCD BTIMR7_Handler + DCD BTIMR8_Handler + DCD BTIMR9_Handler + DCD BTIMR10_Handler + DCD BTIMR11_Handler + DCD DMA2D_Handler + DCD QEI_Handler + + + THUMB + + PUBWEAK Reset_Handler + SECTION .text:CODE:REORDER:NOROOT(2) +Reset_Handler + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SysTick_Handler + B SysTick_Handler + + + PUBWEAK UART0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UART0_Handler + B UART0_Handler + + PUBWEAK UART1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UART1_Handler + B UART1_Handler + + PUBWEAK TIMR0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +TIMR0_Handler + B TIMR0_Handler + + PUBWEAK TIMR1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +TIMR1_Handler + B TIMR1_Handler + + PUBWEAK DMA_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA_Handler + B DMA_Handler + + PUBWEAK SPI0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI0_Handler + B SPI0_Handler + + PUBWEAK PWM0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PWM0_Handler + B PWM0_Handler + + PUBWEAK WDT_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +WDT_Handler + B WDT_Handler + + PUBWEAK UART2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UART2_Handler + B UART2_Handler + + PUBWEAK PWM1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PWM1_Handler + B PWM1_Handler + + PUBWEAK ADC0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +ADC0_Handler + B ADC0_Handler + + PUBWEAK BTIMR0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR0_Handler + B BTIMR0_Handler + + PUBWEAK HALL0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HALL0_Handler + B HALL0_Handler + + PUBWEAK PWM2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PWM2_Handler + B PWM2_Handler + + PUBWEAK PWMBRK_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PWMBRK_Handler + B PWMBRK_Handler + + PUBWEAK I2C0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C0_Handler + B I2C0_Handler + + PUBWEAK CAN0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +CAN0_Handler + B CAN0_Handler + + PUBWEAK SPI1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SPI1_Handler + B SPI1_Handler + + PUBWEAK RTC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +RTC_Handler + B RTC_Handler + + PUBWEAK PWM3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PWM3_Handler + B PWM3_Handler + + PUBWEAK TIMR2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +TIMR2_Handler + B TIMR2_Handler + + PUBWEAK UART3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +UART3_Handler + B UART3_Handler + + PUBWEAK TIMR3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +TIMR3_Handler + B TIMR3_Handler + + PUBWEAK ADC1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +ADC1_Handler + B ADC1_Handler + + PUBWEAK BOD_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BOD_Handler + B BOD_Handler + + PUBWEAK CORDIC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +CORDIC_Handler + B CORDIC_Handler + + PUBWEAK BTIMR1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR1_Handler + B BTIMR1_Handler + + PUBWEAK PWM4_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +PWM4_Handler + B PWM4_Handler + + PUBWEAK HALL3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +HALL3_Handler + B HALL3_Handler + + PUBWEAK BTIMR2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR2_Handler + B BTIMR2_Handler + + PUBWEAK I2C1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +I2C1_Handler + B I2C1_Handler + + PUBWEAK BTIMR3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR3_Handler + B BTIMR3_Handler + + PUBWEAK ACMP_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +ACMP_Handler + B ACMP_Handler + + PUBWEAK XTALSTOP_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +XTALSTOP_Handler + B XTALSTOP_Handler + + PUBWEAK FSPI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +FSPI_Handler + B FSPI_Handler + + PUBWEAK GPIOA_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA_Handler + B GPIOA_Handler + + PUBWEAK GPIOB_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOB_Handler + B GPIOB_Handler + + PUBWEAK GPIOC_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC_Handler + B GPIOC_Handler + + PUBWEAK GPIOD_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD_Handler + B GPIOD_Handler + + PUBWEAK GPIOM_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOM_Handler + B GPIOM_Handler + + PUBWEAK GPION_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPION_Handler + B GPION_Handler + + PUBWEAK GPIOA0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA0_Handler + B GPIOA0_Handler + + PUBWEAK GPIOA1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA1_Handler + B GPIOA1_Handler + + PUBWEAK GPIOA5_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA5_Handler + B GPIOA5_Handler + + PUBWEAK GPIOA6_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA6_Handler + B GPIOA6_Handler + + PUBWEAK GPIOA10_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA10_Handler + B GPIOA10_Handler + + PUBWEAK GPIOA11_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA11_Handler + B GPIOA11_Handler + + PUBWEAK GPIOA12_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA12_Handler + B GPIOA12_Handler + + PUBWEAK GPIOA13_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOA13_Handler + B GPIOA13_Handler + + PUBWEAK GPIOB0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOB0_Handler + B GPIOB0_Handler + + PUBWEAK GPIOB1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOB1_Handler + B GPIOB1_Handler + + PUBWEAK GPIOB2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOB2_Handler + B GPIOB2_Handler + + PUBWEAK GPIOC0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC0_Handler + B GPIOC0_Handler + + PUBWEAK GPIOC1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC1_Handler + B GPIOC1_Handler + + PUBWEAK GPIOC2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC2_Handler + B GPIOC2_Handler + + PUBWEAK GPIOC3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC3_Handler + B GPIOC3_Handler + + PUBWEAK GPIOC4_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC4_Handler + B GPIOC4_Handler + + PUBWEAK GPIOD3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD3_Handler + B GPIOD3_Handler + + PUBWEAK GPIOD4_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD4_Handler + B GPIOD4_Handler + + PUBWEAK GPIOD5_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD5_Handler + B GPIOD5_Handler + + PUBWEAK GPIOD6_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD6_Handler + B GPIOD6_Handler + + PUBWEAK GPIOD7_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD7_Handler + B GPIOD7_Handler + + PUBWEAK GPIOD8_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOD8_Handler + B GPIOD8_Handler + + PUBWEAK GPIOC9_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC9_Handler + B GPIOC9_Handler + + PUBWEAK GPIOC10_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC10_Handler + B GPIOC10_Handler + + PUBWEAK GPIOC11_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC11_Handler + B GPIOC11_Handler + + PUBWEAK GPIOC12_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOC12_Handler + B GPIOC12_Handler + + PUBWEAK GPIOM0_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOM0_Handler + B GPIOM0_Handler + + PUBWEAK GPIOM1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOM1_Handler + B GPIOM1_Handler + + PUBWEAK GPIOM2_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOM2_Handler + B GPIOM2_Handler + + PUBWEAK GPIOM3_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOM3_Handler + B GPIOM3_Handler + + PUBWEAK GPIOM4_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOM4_Handler + B GPIOM4_Handler + + PUBWEAK DIV_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DIV_Handler + B DIV_Handler + + PUBWEAK LCD_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +LCD_Handler + B LCD_Handler + + PUBWEAK GPIOE_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +GPIOE_Handler + B GPIOE_Handler + + PUBWEAK JPEG_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +JPEG_Handler + B JPEG_Handler + + PUBWEAK SDIO_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +SDIO_Handler + B SDIO_Handler + + PUBWEAK USB_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +USB_Handler + B USB_Handler + + PUBWEAK CAN1_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +CAN1_Handler + B CAN1_Handler + + PUBWEAK TIMR4_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +TIMR4_Handler + B TIMR4_Handler + + PUBWEAK BTIMR4_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR4_Handler + B BTIMR4_Handler + + PUBWEAK BTIMR5_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR5_Handler + B BTIMR5_Handler + + PUBWEAK BTIMR6_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR6_Handler + B BTIMR6_Handler + + PUBWEAK BTIMR7_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR7_Handler + B BTIMR7_Handler + + PUBWEAK BTIMR8_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR8_Handler + B BTIMR8_Handler + + PUBWEAK BTIMR9_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR9_Handler + B BTIMR9_Handler + + PUBWEAK BTIMR10_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR10_Handler + B BTIMR10_Handler + + PUBWEAK BTIMR11_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +BTIMR11_Handler + B BTIMR11_Handler + + PUBWEAK DMA2D_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +DMA2D_Handler + B DMA2D_Handler + + PUBWEAK QEI_Handler + SECTION .text:CODE:REORDER:NOROOT(1) +QEI_Handler + B QEI_Handler + + END diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/system_SWM341.c b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/system_SWM341.c new file mode 100644 index 0000000000..896020d6de --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/system_SWM341.c @@ -0,0 +1,410 @@ +/****************************************************************************************************************************************** +* 文件名称: system_SWM341.c +* 功能说明: SWM341单片机的时钟设置 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <stdint.h> +#include "SWM341.h" + + +/****************************************************************************************************************************************** + * 系统时钟设定 + *****************************************************************************************************************************************/ +#define SYS_CLK_20MHz 0 //0 内部高频20MHz RC振荡器 +#define SYS_CLK_2M5Hz 1 //1 内部高频2.5MHz RC振荡器 +#define SYS_CLK_40MHz 2 //2 内部高频40MHz RC振荡器 +#define SYS_CLK_5MHz 3 //3 内部高频 5MHz RC振荡器 +#define SYS_CLK_XTAL 4 //4 外部晶体振荡器(4-32MHz) +#define SYS_CLK_XTAL_DIV8 5 //5 外部晶体振荡器(4-32MHz) 8分频 +#define SYS_CLK_PLL 6 //6 锁相环输出 +#define SYS_CLK_PLL_DIV8 7 //7 锁相环输出 8分频 +#define SYS_CLK_32KHz 8 //8 内部低频32KHz RC 振荡器 +#define SYS_CLK_XTAL_32K 9 //9 外部低频32KHz 晶体振荡器 + +#define SYS_CLK SYS_CLK_PLL + + +#define __HSI (20000000UL) //高速内部时钟 +#define __LSI ( 32000UL) //低速内部时钟 +#define __HSE (12000000UL) //高速外部时钟 +#define __LSE ( 32768UL) //低速外部时钟 + + +/********************************** PLL 设定 ********************************************** + * VCO输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV + * PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV + * 注意:VCO输出频率需要在 [600MHz, 1400MHz] 之间 + *****************************************************************************************/ +#define SYS_PLL_SRC SYS_CLK_XTAL //可取值SYS_CLK_20MHz、SYS_CLK_XTAL + +#define PLL_IN_DIV 3 + +#define PLL_FB_DIV 75 + + +#define PLL_OUT_DIV8 0 +#define PLL_OUT_DIV4 1 +#define PLL_OUT_DIV2 2 + +#define PLL_OUT_DIV PLL_OUT_DIV8 + + + +uint32_t SystemCoreClock = __HSI; //System Clock Frequency (Core Clock) +uint32_t CyclesPerUs = (__HSI / 1000000); //Cycles per micro second + + +/****************************************************************************************************************************************** +* 函数名称: +* 功能说明: This function is used to update the variable SystemCoreClock and must be called whenever the core clock is changed +* 输 入: +* 输 出: +* 注意事项: +******************************************************************************************************************************************/ +void SystemCoreClockUpdate(void) +{ + if(SYS->CLKSEL & SYS_CLKSEL_SYS_Msk) //SYS <= HRC + { + if(SYS->HRCCR & SYS_HRCCR_DBL_Msk) //HRC = 40MHz + { + SystemCoreClock = __HSI*2; + } + else //HRC = 20MHz + { + SystemCoreClock = __HSI; + } + } + else //SYS <= CLK + { + switch((SYS->CLKSEL & SYS_CLKSEL_CLK_Msk) >> SYS_CLKSEL_CLK_Pos) + { + case 0: + SystemCoreClock = __LSI; + break; + + case 1: + if(SYS->PLLCR & SYS_PLLCR_INSEL_Msk) //PLL_IN <= HRC + { + SystemCoreClock = __HSI; + } + else //PLL_IN <= XTAL + { + SystemCoreClock = __HSE; + } + + SystemCoreClock = SystemCoreClock / PLL_IN_DIV * PLL_FB_DIV * 4 / (2 << (2 - PLL_OUT_DIV)); + break; + + case 2: + SystemCoreClock = __LSE; + break; + + case 3: + SystemCoreClock = __HSE; + break; + + case 4: + SystemCoreClock = __HSI; + if(SYS->HRCCR & SYS_HRCCR_DBL_Msk) SystemCoreClock *= 2; + break; + } + + if(SYS->CLKSEL & SYS_CLKSEL_CLK_DIVx_Msk) SystemCoreClock /= 8; + } + + CyclesPerUs = SystemCoreClock / 1000000; +} + +/****************************************************************************************************************************************** +* 函数名称: +* 功能说明: The necessary initializaiton of systerm +* 输 入: +* 输 出: +* 注意事项: +******************************************************************************************************************************************/ +void SystemInit(void) +{ + SYS->CLKEN0 |= (1 << SYS_CLKEN0_ANAC_Pos); + + Flash_Param_at_xMHz(150); + + switch(SYS_CLK) + { + case SYS_CLK_20MHz: + switchTo20MHz(); + break; + + case SYS_CLK_2M5Hz: + switchTo2M5Hz(); + break; + + case SYS_CLK_40MHz: + switchTo40MHz(); + break; + + case SYS_CLK_5MHz: + switchTo5MHz(); + break; + + case SYS_CLK_XTAL: + switchToXTAL(0); + break; + + case SYS_CLK_XTAL_DIV8: + switchToXTAL(1); + break; + + case SYS_CLK_PLL: + switchToPLL(0); + break; + + case SYS_CLK_PLL_DIV8: + switchToPLL(1); + break; + + case SYS_CLK_32KHz: + switchTo32KHz(); + break; + + case SYS_CLK_XTAL_32K: + switchToXTAL_32K(); + break; + } + + SystemCoreClockUpdate(); + + if(SystemCoreClock > 120000000) + { + Flash_Param_at_xMHz(150); + } + else if(SystemCoreClock > 80000000) + { + Flash_Param_at_xMHz(120); + } + else if(SystemCoreClock > 40000000) + { + Flash_Param_at_xMHz(80); + } + else if(SystemCoreClock > 30000000) + { + Flash_Param_at_xMHz(40); + } + else + { + Flash_Param_at_xMHz(30); + } + + PORTM->PULLD &= ~(1 << PIN1); + PORTM->PULLU &= ~((1 << PIN2) | (1 << PIN3)); + + SYS->USBPHYCR &= ~SYS_USBPHYCR_OPMODE_Msk; + SYS->USBPHYCR |= (1 << SYS_USBPHYCR_OPMODE_Pos); //Non-Driving, DP Pull-Up disable +} + + +void FPU_Enable(void) +{ +#if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= (0xF << 20); +#endif +} + + +static void delay_3ms(void) +{ + uint32_t i; + + if(((SYS->CLKSEL & SYS_CLKSEL_SYS_Msk) == 0) && + ((((SYS->CLKSEL & SYS_CLKSEL_CLK_Msk) >> SYS_CLKSEL_CLK_Pos) == 0) || //LSI 32KHz + (((SYS->CLKSEL & SYS_CLKSEL_CLK_Msk) >> SYS_CLKSEL_CLK_Pos) == 2))) //LSE 32KHz + { + for(i = 0; i < 20; i++) __NOP(); + } + else + { + for(i = 0; i < 20000; i++) __NOP(); + } +} + + +void switchTo20MHz(void) +{ + SYS->HRCCR = (1 << SYS_HRCCR_ON_Pos) | + (0 << SYS_HRCCR_DBL_Pos); //HRC = 20Hz + + delay_3ms(); + + SYS->CLKSEL |= (1 << SYS_CLKSEL_SYS_Pos); //SYS <= HRC +} + +void switchTo2M5Hz(void) +{ + switchTo20MHz(); + + SYS->CLKDIVx_ON = 1; + + SYS->CLKSEL &= ~SYS_CLKSEL_CLK_Msk; + SYS->CLKSEL |= (4 << SYS_CLKSEL_CLK_Pos); //CLK <= HRC + + SYS->CLKSEL |= (1 << SYS_CLKSEL_CLK_DIVx_Pos); + + delay_3ms(); + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_SYS_Pos); //SYS <= HRC/8 +} + +void switchTo40MHz(void) +{ + SYS->HRCCR = (1 << SYS_HRCCR_ON_Pos) | + (1 << SYS_HRCCR_DBL_Pos); //HRC = 40MHz + + delay_3ms(); + + SYS->CLKSEL |= (1 << SYS_CLKSEL_SYS_Pos); //SYS <= HRC +} + +void switchTo5MHz(void) +{ + switchTo40MHz(); + + SYS->CLKDIVx_ON = 1; + + SYS->CLKSEL &= ~SYS_CLKSEL_CLK_Msk; + SYS->CLKSEL |= (4 << SYS_CLKSEL_CLK_Pos); //CLK <= HRC + + SYS->CLKSEL |= (1 << SYS_CLKSEL_CLK_DIVx_Pos); + + delay_3ms(); + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_SYS_Pos); //SYS <= HRC/8 +} + +void switchToXTAL(uint32_t div8) +{ + switchTo20MHz(); + + PORT_Init(PORTA, PIN3, PORTA_PIN3_XTAL_IN, 0); + PORT_Init(PORTA, PIN4, PORTA_PIN4_XTAL_OUT, 0); + SYS->XTALCR |= (1 << SYS_XTALCR_ON_Pos) | (15 << SYS_XTALCR_DRV_Pos) | (1 << SYS_XTALCR_DET_Pos); + + delay_3ms(); + delay_3ms(); + + SYS->CLKDIVx_ON = 1; + + SYS->CLKSEL &= ~SYS_CLKSEL_CLK_Msk; + SYS->CLKSEL |= (3 << SYS_CLKSEL_CLK_Pos); //CLK <= XTAL + + if(div8) SYS->CLKSEL |= (1 << SYS_CLKSEL_CLK_DIVx_Pos); + else SYS->CLKSEL &=~(1 << SYS_CLKSEL_CLK_DIVx_Pos); + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_SYS_Pos); //SYS <= XTAL +} + +void switchToPLL(uint32_t div8) +{ + switchTo20MHz(); + + PLLInit(); + + SYS->CLKDIVx_ON = 1; + + SYS->CLKSEL &= ~SYS_CLKSEL_CLK_Msk; + SYS->CLKSEL |= (1 << SYS_CLKSEL_CLK_Pos); //CLK <= PLL + + if(div8) SYS->CLKSEL |= (1 << SYS_CLKSEL_CLK_DIVx_Pos); + else SYS->CLKSEL &=~(1 << SYS_CLKSEL_CLK_DIVx_Pos); + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_SYS_Pos); //SYS <= PLL +} + +void switchTo32KHz(void) +{ + switchTo20MHz(); + + SYS->LRCCR = (1 << SYS_LRCCR_ON_Pos); + + SYS->CLKDIVx_ON = 1; + + SYS->CLKSEL &= ~SYS_CLKSEL_CLK_Msk; + SYS->CLKSEL |= (0 << SYS_CLKSEL_CLK_Pos); //CLK <= LRC + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_CLK_DIVx_Pos); + + delay_3ms(); + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_SYS_Pos); //SYS <= LRC +} + +void switchToXTAL_32K(void) +{ + uint32_t i; + + switchTo20MHz(); + + SYS->XTALCR |= (1 << SYS_XTALCR_32KON_Pos) | (7 << SYS_XTALCR_32KDRV_Pos) | (1 << SYS_XTALCR_32KDET_Pos); + for(i = 0; i < 1000; i++) __NOP(); + + SYS->CLKDIVx_ON = 1; + + SYS->CLKSEL &= ~SYS_CLKSEL_CLK_Msk; + SYS->CLKSEL |= (2 << SYS_CLKSEL_CLK_Pos); //CLK <= XTAL_32K + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_CLK_DIVx_Pos); + + delay_3ms(); + + SYS->CLKSEL &=~(1 << SYS_CLKSEL_SYS_Pos); //SYS <= XTAL_32K +} + +void PLLInit(void) +{ + if(SYS_PLL_SRC == SYS_CLK_20MHz) + { + SYS->HRCCR = (1 << SYS_HRCCR_ON_Pos) | + (0 << SYS_HRCCR_DBL_Pos); //HRC = 20Hz + + delay_3ms(); + + SYS->PLLCR |= (1 << SYS_PLLCR_INSEL_Pos); //PLL_SRC <= HRC + } + else if(SYS_PLL_SRC == SYS_CLK_XTAL) + { + PORT_Init(PORTA, PIN3, PORTA_PIN3_XTAL_IN, 0); + PORT_Init(PORTA, PIN4, PORTA_PIN4_XTAL_OUT, 0); + SYS->XTALCR |= (1 << SYS_XTALCR_ON_Pos) | (15 << SYS_XTALCR_DRV_Pos) | (1 << SYS_XTALCR_DET_Pos); + + delay_3ms(); + delay_3ms(); + + SYS->PLLCR &= ~(1 << SYS_PLLCR_INSEL_Pos); //PLL_SRC <= XTAL + } + + SYS->PLLDIV &= ~(SYS_PLLDIV_INDIV_Msk | + SYS_PLLDIV_FBDIV_Msk | + SYS_PLLDIV_OUTDIV_Msk); + SYS->PLLDIV |= (PLL_IN_DIV << SYS_PLLDIV_INDIV_Pos) | + (PLL_FB_DIV << SYS_PLLDIV_FBDIV_Pos) | + (PLL_OUT_DIV<< SYS_PLLDIV_OUTDIV_Pos); + + SYS->PLLCR &= ~(1 << SYS_PLLCR_OFF_Pos); + + while(SYS->PLLLOCK == 0); //等待PLL锁定 + + SYS->PLLCR |= (1 << SYS_PLLCR_OUTEN_Pos); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/system_SWM341.h b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/system_SWM341.h new file mode 100644 index 0000000000..c7fc2c61e3 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/CMSIS/DeviceSupport/system_SWM341.h @@ -0,0 +1,33 @@ +#ifndef __SYSTEM_SWM341_H__ +#define __SYSTEM_SWM341_H__ + +#ifdef __cplusplus + extern "C" { +#endif + + +extern uint32_t SystemCoreClock; // System Clock Frequency (Core Clock) +extern uint32_t CyclesPerUs; // Cycles per micro second + + +extern void SystemInit(void); + +extern void SystemCoreClockUpdate (void); + +extern void PLLInit(void); + +extern void switchTo20MHz(void); +extern void switchTo2M5Hz(void); +extern void switchTo40MHz(void); +extern void switchTo5MHz(void); +extern void switchToXTAL(uint32_t div8); +extern void switchToPLL(uint32_t div8); +extern void switchTo32KHz(void); +extern void switchToXTAL_32K(void); + + +#ifdef __cplusplus +} +#endif + +#endif //__SYSTEM_SWM341_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SConscript b/bsp/synwit/libraries/SWM341_CSL/SConscript new file mode 100644 index 0000000000..c235245d06 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SConscript @@ -0,0 +1,23 @@ +from building import * +import rtconfig + +cwd = GetCurrentDir() + +src = Glob('CMSIS/DeviceSupport/*.c') +src += Glob('SWM341_StdPeriph_Driver/*.c') + +if rtconfig.CROSS_TOOL == 'gcc': + src += ['CMSIS/DeviceSupport/startup/gcc/startup_SWM341.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += ['CMSIS/DeviceSupport/startup/arm/startup_SWM341.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += ['CMSIS/DeviceSupport/startup/iar/startup_SWM341.s'] + +inc = [cwd + '/CMSIS/CoreSupport', + cwd + '/CMSIS/DeviceSupport', + cwd + '/SWM341_StdPeriph_Driver' +] + +group = DefineGroup('Libraries', src, depend = [''], CPPPATH = inc) + +Return('group') diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_adc.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_adc.c new file mode 100644 index 0000000000..736a1f4f18 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_adc.c @@ -0,0 +1,355 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_adc.c +* 功能说明: SWM341单片机的ADC数模转换器功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_adc.h" + + +/****************************************************************************************************************************************** +* 函数名称: ADC_Init() +* 功能说明: ADC模数转换器初始化 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* ADC_InitStructure * initStruct 包含ADC各相关定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_Init(ADC_TypeDef * ADCx, ADC_InitStructure * initStruct) +{ + uint32_t i; + + switch((uint32_t)ADCx) + { + case ((uint32_t)ADC0): + SYS->CLKSEL &= ~(SYS_CLKSEL_AD0_Msk | SYS_CLKSEL_AD0DIV_Msk); + SYS->CLKSEL |= (initStruct->clk_src << SYS_CLKSEL_AD0_Pos); + + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_ADC0_Pos); + break; + + case ((uint32_t)ADC1): + SYS->CLKSEL &= ~(SYS_CLKSEL_AD1_Msk | SYS_CLKSEL_AD1DIV_Msk); + SYS->CLKSEL |= (initStruct->clk_src << SYS_CLKSEL_AD1_Pos); + + SYS->CLKEN1 |= (0x01 << SYS_CLKEN1_ADC1_Pos); + break; + } + + ADC_Close(ADCx); //一些关键寄存器只能在ADC关闭时设置 + + ADCx->CR |= (1 <<ADC_CR_RESET_Pos); + for(i = 0; i < 120*20; i++) __NOP(); //至少2个采样时钟周期 + ADCx->CR &= ~(1 << ADC_CR_RESET_Pos); + + ADCx->CR |= (0xF << ADC_CR_FFCLR_Pos); + ADCx->CR &= ~(0xF << ADC_CR_FFCLR_Pos); + + ADCx->CR &= ~ADC_CR_AVG_Msk; + ADCx->CR |= (initStruct->samplAvg << ADC_CR_AVG_Pos); + + ADCx->IE = 0; + ADCx->IF = 0x3F3F3F3F; //清除中断标志 + + ADCx->IE |= (((initStruct->EOC_IEn & ADC_SEQ0) ? 1 : 0) << ADC_IE_SEQ0EOC_Pos) | + (((initStruct->EOC_IEn & ADC_SEQ1) ? 1 : 0) << ADC_IE_SEQ1EOC_Pos) | + (((initStruct->EOC_IEn & ADC_SEQ2) ? 1 : 0) << ADC_IE_SEQ2EOC_Pos) | + (((initStruct->EOC_IEn & ADC_SEQ3) ? 1 : 0) << ADC_IE_SEQ3EOC_Pos); + + ADCx->IE |= (((initStruct->HalfIEn & ADC_SEQ0) ? 1 : 0) << ADC_IE_SEQ0HALF_Pos) | + (((initStruct->HalfIEn & ADC_SEQ1) ? 1 : 0) << ADC_IE_SEQ1HALF_Pos) | + (((initStruct->HalfIEn & ADC_SEQ2) ? 1 : 0) << ADC_IE_SEQ2HALF_Pos) | + (((initStruct->HalfIEn & ADC_SEQ3) ? 1 : 0) << ADC_IE_SEQ3HALF_Pos); + + switch((uint32_t)ADCx) + { + case ((uint32_t)ADC0): + if(initStruct->EOC_IEn | initStruct->HalfIEn) NVIC_EnableIRQ(ADC0_IRQn); + break; + + case ((uint32_t)ADC1): + if(initStruct->EOC_IEn | initStruct->HalfIEn) NVIC_EnableIRQ(ADC1_IRQn); + break; + } +} + +static uint32_t ADC_seq2pos(uint32_t seq) +{ + uint32_t pos = 0; + + switch(seq) + { + case ADC_SEQ0: pos = 0; break; + case ADC_SEQ1: pos = 8; break; + case ADC_SEQ2: pos = 16; break; + case ADC_SEQ3: pos = 24; break; + } + + return pos; +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_SEQ_Init() +* 功能说明: ADC序列初始化 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的序列,有效值包括ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* ADC_SEQ_InitStructure * initStruct 包含ADC序列设定定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_SEQ_Init(ADC_TypeDef * ADCx, uint32_t seq, ADC_SEQ_InitStructure * initStruct) +{ + uint32_t pos = ADC_seq2pos(seq); + + switch(seq) + { + case ADC_SEQ0: + case ADC_SEQ1: + ADCx->SEQCHN0 &= ~(0xFFFu << (pos * 2)); + ADCx->SEQCHN0 |= (initStruct->channels << (pos * 2)); + break; + + case ADC_SEQ2: + case ADC_SEQ3: + ADCx->SEQCHN1 &= ~(0xFFFu << ((pos - 16) * 2)); + ADCx->SEQCHN1 |= (initStruct->channels << ((pos - 16) * 2)); + break; + } + + ADCx->SEQTRG &= ~(0xFFu << pos); + ADCx->SEQTRG |= (initStruct->trig_src << pos); + + ADCx->SEQCOV &= ~(0xFFu << pos); + ADCx->SEQCOV |= ((initStruct->conv_cnt ? initStruct->conv_cnt - 1 : 0) << pos); + + ADCx->SEQSMP &= ~(0x0Fu << (pos >> 1)); + ADCx->SEQSMP |= (initStruct->samp_tim << (pos >> 1)); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_CMP_Init() +* 功能说明: ADC比较功能初始化 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的序列,有效值包括ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* ADC_CMP_InitStructure * initStruct 包含ADC比较功能设定定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_CMP_Init(ADC_TypeDef * ADCx, uint32_t seq, ADC_CMP_InitStructure * initStruct) +{ + uint32_t idx; + uint32_t pos = ADC_seq2pos(seq); + + idx = pos / 8; + ADCx->SEQ[idx].CMP = (initStruct->UpperLimit << ADC_CMP_MAX_Pos) | + (initStruct->LowerLimit << ADC_CMP_MIN_Pos); + + if(initStruct->UpperLimitIEn) ADCx->IE |= (1 << (pos + 4)); + else ADCx->IE &= ~(1 << (pos + 4)); + + if(initStruct->LowerLimitIEn) ADCx->IE |= (1 << (pos + 5)); + else ADCx->IE &= ~(1 << (pos + 5)); + + if(initStruct->UpperLimitIEn || initStruct->LowerLimitIEn) + { + switch((uint32_t)ADCx) + { + case ((uint32_t)ADC0): NVIC_EnableIRQ(ADC0_IRQn); break; + case ((uint32_t)ADC1): NVIC_EnableIRQ(ADC1_IRQn); break; + } + } +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_Open() +* 功能说明: ADC开启,可以软件启动、或硬件触发ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_Open(ADC_TypeDef * ADCx) +{ + uint32_t i; + + ADCx->CR2 |= (1 << ADC_CR2_ENLDO_Pos); + for(i = 0; i < 64*20; i++) __NOP(); + + ADCx->CR |= (0x01 << ADC_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_Calibrate() +* 功能说明: ADC校准 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_Calibrate(ADC_TypeDef * ADCx) +{ + uint32_t i; + + ADCx->CALIB |= (1 << ADC_CALIB_RESET_Pos); + for(i = 0; i < 120 * 20; i++) __NOP(); //2个采样时钟周期 + + ADCx->CALIB |= (1 << ADC_CALIB_START_Pos); + for(i = 0; i < 120 * 10; i++) __NOP(); + ADCx->CALIB &=~(1 << ADC_CALIB_START_Pos); + while(ADCx->CALIB & ADC_CALIB_BUSY_Msk) __NOP(); + + ADCx->CALIB |= (1 << ADC_CALIB_LOAD_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_Close() +* 功能说明: ADC关闭,无法软件启动、或硬件触发ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_Close(ADC_TypeDef * ADCx) +{ + ADCx->CR &= ~(0x01 << ADC_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_Start() +* 功能说明: 软件触发模式下启动ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3及其组合(即“按位或”运算) +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_Start(ADC_TypeDef * ADCx, uint32_t seq) +{ + ADCx->GO |= (seq << ADC_GO_SEQ0_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_Stop() +* 功能说明: 软件触发模式下停止ADC转换 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3及其组合(即“按位或”运算) +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_Stop(ADC_TypeDef * ADCx, uint32_t seq) +{ + ADCx->GO &= ~(seq << ADC_GO_SEQ0_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_Read() +* 功能说明: 从指定序列读取转换结果 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* uint32_t *chn 转换结果来自哪个通道,ADC_CH0、ADC_CH1、... ...、ADC_CH10、ADC_CH11 +* 输 出: uint32_t 读取到的转换结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t ADC_Read(ADC_TypeDef * ADCx, uint32_t seq, uint32_t *chn) +{ + uint32_t idx = ADC_seq2pos(seq) / 8; + + uint32_t reg = ADCx->SEQ[idx].DR; + + *chn = 1 << ((reg & ADC_DR_CHNUM_Msk) >> ADC_DR_CHNUM_Pos); + + return reg & ADC_DR_VALUE_Msk; +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_DataAvailable() +* 功能说明: 指定序列是否有数据可读取 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* 输 出: uint32_t 1 有数据可读取 0 无数据 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t ADC_DataAvailable(ADC_TypeDef * ADCx, uint32_t seq) +{ + uint32_t idx = ADC_seq2pos(seq) / 8; + + return (ADCx->SEQ[idx].SR & ADC_SR_EMPTY_Msk) ? 0 : 1; +} + + +/****************************************************************************************************************************************** +* 函数名称: ADC_INTEn() +* 功能说明: 中断使能 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* uint32_t it interrupt type,有效值包括ADC_IT_EOC、ADC_IT_FIFO_OVF、ADC_IT_FIFO_HALF、ADC_IT_FIFO_FULL、 +* ADC_IT_CMP_MAX、ADC_IT_CMP_MIN 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_INTEn(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it) +{ + uint32_t pos = ADC_seq2pos(seq); + + ADCx->IE |= (it << pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_INTDis() +* 功能说明: 中断禁止 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* uint32_t it interrupt type,有效值包括ADC_IT_EOC、ADC_IT_FIFO_OVF、ADC_IT_FIFO_HALF、ADC_IT_FIFO_FULL、 +* ADC_IT_CMP_MAX、ADC_IT_CMP_MIN 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_INTDis(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it) +{ + uint32_t pos = ADC_seq2pos(seq); + + ADCx->IE &= ~(it << pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_INTClr() +* 功能说明: 中断标志清除 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要设置的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* uint32_t it interrupt type,有效值包括ADC_IT_EOC、ADC_IT_FIFO_OVF、ADC_IT_FIFO_HALF、ADC_IT_FIFO_FULL、 +* ADC_IT_CMP_MAX、ADC_IT_CMP_MIN 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void ADC_INTClr(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it) +{ + uint32_t pos = ADC_seq2pos(seq); + + ADCx->IF = (it << pos); +} + +/****************************************************************************************************************************************** +* 函数名称: ADC_INTStat() +* 功能说明: 中断状态查询 +* 输 入: ADC_TypeDef * ADCx 指定要设置的ADC,有效值包括ADC0、ADC1 +* uint32_t seq 指定要查询的ADC序列,有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3 +* uint32_t it interrupt type,有效值包括ADC_IT_EOC、ADC_IT_FIFO_OVF、ADC_IT_FIFO_HALF、ADC_IT_FIFO_FULL、 +* ADC_IT_CMP_MAX、ADC_IT_CMP_MIN 及其“或” +* 输 出: uint32_t 1 中断发生 0 中断未发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t ADC_INTStat(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it) +{ + uint32_t pos = ADC_seq2pos(seq); + + return (ADCx->IF & (it << pos)) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_adc.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_adc.h new file mode 100644 index 0000000000..730cf909f8 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_adc.h @@ -0,0 +1,109 @@ +#ifndef __SWM341_ADC_H__ +#define __SWM341_ADC_H__ + +typedef struct { + uint8_t clk_src; //ADC转换时钟源:ADC_CLKSRC_HRC、ADC_CLKSRC_XTAL、... + uint8_t samplAvg; //采样取平均,触发启动ADC转换后,ADC在一个通道上连续采样、转换多次,并将它们的平均值作为该通道转换结果 + + uint8_t EOC_IEn; //EOC中断使能, 可针对每个序列设置,其有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3及其组合(即“按位或”运算) + uint8_t HalfIEn; //FIFO半满中断使能,可针对每个序列设置,其有效值为ADC_SEQ0、ADC_SEQ1、ADC_SEQ2、ADC_SEQ3及其组合(即“按位或”运算) +} ADC_InitStructure; + +typedef struct { + uint16_t channels; //ADC序列转换通道选中,ADC_CH0、ADC_CH1、... ... 、ADC_CH7及其组合(即“按位或”运算) + uint8_t trig_src; //ADC序列触发方式:ADC_TRIGGER_SW、ADC_TRIGGER_TIMER2、ADC_TRIGGER_TIMER3、... ... + uint16_t conv_cnt; //ADC序列转换次数,可取值1--256 + uint8_t samp_tim; //ADC序列采样时间,可取值ADC_SAMPLE_1CLOCK、ADC_SAMPLE_2CLOCK、ADC_SAMPLE_4CLOCK、ADC_SAMPLE_8CLOCK +} ADC_SEQ_InitStructure; + +typedef struct { + uint16_t UpperLimit; //比较上限值 + uint16_t UpperLimitIEn; //ADC转换结果大于UpperLimit中断使能 + uint16_t LowerLimit; //比较下限值 + uint16_t LowerLimitIEn; //ADC转换结果小于LowerLimit中断使能 +} ADC_CMP_InitStructure; + +#define ADC_CH0 0x001 +#define ADC_CH1 0x002 +#define ADC_CH2 0x004 +#define ADC_CH3 0x008 +#define ADC_CH4 0x010 +#define ADC_CH5 0x020 +#define ADC_CH6 0x040 +#define ADC_CH7 0x080 +#define ADC_CH8 0x100 +#define ADC_CH9 0x200 +#define ADC_CH10 0x400 +#define ADC_CH11 0x800 + +#define ADC_SEQ0 0x1 +#define ADC_SEQ1 0x2 +#define ADC_SEQ2 0x4 +#define ADC_SEQ3 0x8 + +#define ADC_CLKSRC_HRC ((0 << 2) | 0) +#define ADC_CLKSRC_XTAL ((0 << 2) | 1) +#define ADC_CLKSRC_PLL ((0 << 2) | 2) +#define ADC_CLKSRC_HRC_DIV4 ((2 << 2) | 0) +#define ADC_CLKSRC_XTAL_DIV4 ((2 << 2) | 1) +#define ADC_CLKSRC_PLL_DIV4 ((2 << 2) | 2) +#define ADC_CLKSRC_HRC_DIV8 ((3 << 2) | 0) +#define ADC_CLKSRC_XTAL_DIV8 ((3 << 2) | 1) +#define ADC_CLKSRC_PLL_DIV8 ((3 << 2) | 2) + +#define ADC_AVG_SAMPLE1 0 +#define ADC_AVG_SAMPLE2 1 //一次启动连续采样、转换2次,并计算两次结果的平均值作为转换结果 +#define ADC_AVG_SAMPLE4 2 +#define ADC_AVG_SAMPLE8 3 + +#define ADC_TRIGGER_NO 0 +#define ADC_TRIGGER_SW 1 //软件启动 +#define ADC_TRIGGER_TIMER2 2 +#define ADC_TRIGGER_TIMER3 3 +#define ADC_TRIGGER_EXTRIG0 4 +#define ADC_TRIGGER_EXTRIG1 5 +#define ADC_TRIGGER_PWM0 0x10 +#define ADC_TRIGGER_PWM1 0x11 +#define ADC_TRIGGER_PWM2 0x12 +#define ADC_TRIGGER_PWM3 0x13 +#define ADC_TRIGGER_PWM4 0x14 + +#define ADC_SAMPLE_1CLOCK 0 +#define ADC_SAMPLE_2CLOCK 1 +#define ADC_SAMPLE_4CLOCK 2 +#define ADC_SAMPLE_8CLOCK 3 +#define ADC_SAMPLE_16CLOCK 4 +#define ADC_SAMPLE_32CLOCK 5 +#define ADC_SAMPLE_64CLOCK 6 +#define ADC_SAMPLE_128CLOCK 7 + + +/* Interrupt Type */ +#define ADC_IT_EOC (1 << 0) //End Of Conversion +#define ADC_IT_FIFO_OVF (1 << 1) //FIFO Overflow +#define ADC_IT_FIFO_HALF (1 << 2) //FIFO Half Full +#define ADC_IT_FIFO_FULL (1 << 3) //FIFO Full +#define ADC_IT_CMP_MAX (1 << 4) //转换结果大于COMP.MAX +#define ADC_IT_CMP_MIN (1 << 5) //转换结果小于COMP.MIN + + +void ADC_Init(ADC_TypeDef * ADCx, ADC_InitStructure * initStruct); //ADC模数转换器初始化 +void ADC_SEQ_Init(ADC_TypeDef * ADCx, uint32_t seq, ADC_SEQ_InitStructure * initStruct); //ADC序列初始化 +void ADC_CMP_Init(ADC_TypeDef * ADCx, uint32_t seq, ADC_CMP_InitStructure * initStruct); //ADC比较功能初始化 +void ADC_Open(ADC_TypeDef * ADCx); //ADC开启,可以软件启动、或硬件触发ADC转换 +void ADC_Calibrate(ADC_TypeDef * ADCx); //ADC校准 +void ADC_Close(ADC_TypeDef * ADCx); //ADC关闭,无法软件启动、或硬件触发ADC转换 +void ADC_Start(ADC_TypeDef * ADCx, uint32_t seq); //启动指定ADC,开始模数转换 +void ADC_Stop(ADC_TypeDef * ADCx, uint32_t seq); //关闭指定ADC,停止模数转换 + +uint32_t ADC_Read(ADC_TypeDef * ADCx, uint32_t seq, uint32_t *chn); //从指定通道读取转换结果 +uint32_t ADC_DataAvailable(ADC_TypeDef * ADCx, uint32_t seq); //指定序列是否有数据可读取 + + +void ADC_INTEn(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it); +void ADC_INTEn(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it); +void ADC_INTClr(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it); +uint32_t ADC_INTStat(ADC_TypeDef * ADCx, uint32_t seq, uint32_t it); + + +#endif //__SWM341_ADC_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_can.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_can.c new file mode 100644 index 0000000000..f73d394946 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_can.c @@ -0,0 +1,442 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_can.c +* 功能说明: SWM341单片机的CAN模块驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_can.h" + + +/****************************************************************************************************************************************** +* 函数名称: CAN_Init() +* 功能说明: CAN接口初始化 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* CAN_InitStructure * initStruct 包含CAN接口相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_Init(CAN_TypeDef * CANx, CAN_InitStructure * initStruct) +{ + uint32_t brp = (SystemCoreClock/2)/2/initStruct->Baudrate/(1 + (initStruct->CAN_bs1 + 1) + (initStruct->CAN_bs2 + 1)) - 1; + + switch((uint32_t)CANx) + { + case ((uint32_t)CAN0): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_CAN0_Pos); + break; + + case ((uint32_t)CAN1): + SYS->CLKEN1 |= (0x01 << SYS_CLKEN1_CAN1_Pos); + break; + } + + CAN_Close(CANx); //一些关键寄存器只能在CAN关闭时设置 + + CANx->CR &= ~(CAN_CR_LOM_Msk | CAN_CR_STM_Msk); + CANx->CR |= (initStruct->Mode << CAN_CR_LOM_Pos); + + CANx->BT1 = (0 << CAN_BT1_SAM_Pos) | + (initStruct->CAN_bs1 << CAN_BT1_TSEG1_Pos) | + (initStruct->CAN_bs2 << CAN_BT1_TSEG2_Pos); + + CANx->BT0 = (initStruct->CAN_sjw << CAN_BT0_SJW_Pos) | + ((brp & 0x3F) << CAN_BT0_BRP_Pos); + + CANx->BT2 = ((brp >> 6) << CAN_BT2_BRP_Pos); + + CANx->RXERR = 0; //只能在复位模式下清除 + CANx->TXERR = 0; + + CANx->IE = (initStruct->RXNotEmptyIEn << CAN_IE_RXDA_Pos) | + (initStruct->ArbitrLostIEn << CAN_IE_ARBLOST_Pos) | + (initStruct->ErrPassiveIEn << CAN_IE_ERRPASS_Pos); + + switch((uint32_t)CANx) + { + case ((uint32_t)CAN0): + if(initStruct->RXNotEmptyIEn | initStruct->ArbitrLostIEn | initStruct->ErrPassiveIEn) + { + NVIC_EnableIRQ(CAN0_IRQn); + } + else + { + NVIC_DisableIRQ(CAN0_IRQn); + } + break; + + case ((uint32_t)CAN1): + if(initStruct->RXNotEmptyIEn | initStruct->ArbitrLostIEn | initStruct->ErrPassiveIEn) + { + NVIC_EnableIRQ(CAN1_IRQn); + } + else + { + NVIC_DisableIRQ(CAN1_IRQn); + } + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_Open() +* 功能说明: CAN接口打开 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_Open(CAN_TypeDef * CANx) +{ + CANx->CR &= ~(0x01 << CAN_CR_RST_Pos); //退出复位模式,进入工作模式 +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_Close() +* 功能说明: CAN接口关闭 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_Close(CAN_TypeDef * CANx) +{ + CANx->CR |= (0x01 << CAN_CR_RST_Pos); //进入复位模式,不能发送和接收数据 +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_Transmit() +* 功能说明: CAN发送数据 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t format CAN_FRAME_STD 标准帧 CAN_FRAME_EXT 扩展帧 +* uint32_t id 消息ID +* uint8_t data[] 要发送的数据 +* uint32_t size 要发送的数据的个数 +* uint32_t once 只发送一次,即使发送失败(仲裁丢失、发送出错、NAK)也不尝试重发 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_Transmit(CAN_TypeDef * CANx, uint32_t format, uint32_t id, uint8_t data[], uint32_t size, uint32_t once) +{ + uint32_t i; + + if(format == CAN_FRAME_STD) + { + CANx->FRAME.INFO = (0 << CAN_INFO_FF_Pos) | + (0 << CAN_INFO_RTR_Pos) | + (size << CAN_INFO_DLC_Pos); + + CANx->FRAME.DATA[0] = id >> 3; + CANx->FRAME.DATA[1] = id << 5; + + for(i = 0; i < size; i++) + { + CANx->FRAME.DATA[i+2] = data[i]; + } + } + else //if(format == CAN_FRAME_EXT) + { + CANx->FRAME.INFO = (1 << CAN_INFO_FF_Pos) | + (0 << CAN_INFO_RTR_Pos) | + (size << CAN_INFO_DLC_Pos); + + CANx->FRAME.DATA[0] = id >> 21; + CANx->FRAME.DATA[1] = id >> 13; + CANx->FRAME.DATA[2] = id >> 5; + CANx->FRAME.DATA[3] = id << 3; + + for(i = 0; i < size; i++) + { + CANx->FRAME.DATA[i+4] = data[i]; + } + } + + if(CANx->CR & CAN_CR_STM_Msk) + { + CANx->CMD = (1 << CAN_CMD_SRR_Pos); + } + else + { + if(once == 0) + { + CANx->CMD = (1 << CAN_CMD_TXREQ_Pos); + } + else + { + CANx->CMD = (1 << CAN_CMD_TXREQ_Pos) | (1 << CAN_CMD_ABTTX_Pos); + } + } +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_TransmitRequest() +* 功能说明: CAN发送远程请求,请求远程节点发送数据 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t format CAN_FRAME_STD 标准帧 CAN_FRAME_EXT 扩展帧 +* uint32_t id 消息ID +* uint32_t once 只发送一次,即使发送失败(仲裁丢失、发送出错、NAK)也不尝试重发 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_TransmitRequest(CAN_TypeDef * CANx, uint32_t format, uint32_t id, uint32_t once) +{ + if(format == CAN_FRAME_STD) + { + CANx->FRAME.INFO = (0 << CAN_INFO_FF_Pos) | + (1 << CAN_INFO_RTR_Pos) | + (0 << CAN_INFO_DLC_Pos); + + CANx->FRAME.DATA[0] = id >> 3; + CANx->FRAME.DATA[1] = id << 5; + } + else //if(format == CAN_FRAME_EXT) + { + CANx->FRAME.INFO = (1 << CAN_INFO_FF_Pos) | + (1 << CAN_INFO_RTR_Pos) | + (0 << CAN_INFO_DLC_Pos); + + CANx->FRAME.DATA[0] = id >> 21; + CANx->FRAME.DATA[1] = id >> 13; + CANx->FRAME.DATA[2] = id >> 5; + CANx->FRAME.DATA[3] = id << 3; + } + + if(once == 0) + { + CANx->CMD = (1 << CAN_CMD_TXREQ_Pos); + } + else + { + CANx->CMD = (1 << CAN_CMD_TXREQ_Pos) | (1 << CAN_CMD_ABTTX_Pos); + } +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_Receive() +* 功能说明: CAN接收数据 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* CAN_RXMessage *msg 接收到的消息存储在此结构体变量中 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_Receive(CAN_TypeDef * CANx, CAN_RXMessage *msg) +{ + uint32_t i; + msg->format = (CANx->FRAME.INFO & CAN_INFO_FF_Msk) >> CAN_INFO_FF_Pos; + + msg->remote = (CANx->FRAME.INFO & CAN_INFO_RTR_Msk) >> CAN_INFO_RTR_Pos; + msg->size = (CANx->FRAME.INFO & CAN_INFO_DLC_Msk) >> CAN_INFO_DLC_Pos; + + if(msg->format == CAN_FRAME_STD) + { + msg->id = (CANx->FRAME.DATA[0] << 3) | (CANx->FRAME.DATA[1] >> 5); + + for(i = 0; i < msg->size; i++) + { + msg->data[i] = CANx->FRAME.DATA[i+2]; + } + } + else //if(msg->format == CAN_FRAME_EXT) + { + msg->id = (CANx->FRAME.DATA[0] << 21) | (CANx->FRAME.DATA[1] << 13) | (CANx->FRAME.DATA[2] << 5) | (CANx->FRAME.DATA[3] >> 3); + + for(i = 0; i < msg->size; i++) + { + msg->data[i] = CANx->FRAME.DATA[i+4]; + } + } + + CANx->CMD = (1 << CAN_CMD_RRB_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_TXComplete() +* 功能说明: 发送是否完成 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: uint32_t 1 已经完成 0 还未完成 +* 注意事项: 发送被Abort也会触发发送完成,但不会触发发送成功 +******************************************************************************************************************************************/ +uint32_t CAN_TXComplete(CAN_TypeDef * CANx) +{ + return (CANx->SR & CAN_SR_TXBR_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_TXSuccess() +* 功能说明: 发送是否成功 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: uint32_t 1 发送成功 0 发送失败 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t CAN_TXSuccess(CAN_TypeDef * CANx) +{ + return (CANx->SR & CAN_SR_TXOK_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_AbortTransmit() +* 功能说明: 终止发送 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: 无 +* 注意事项: 正在进行的发送无法终止,但执行此命令后若发送失败不会再重发 +******************************************************************************************************************************************/ +void CAN_AbortTransmit(CAN_TypeDef * CANx) +{ + CANx->CMD = (1 << CAN_CMD_ABTTX_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_TXBufferReady() +* 功能说明: TX Buffer是否准备好可以写入消息 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: uint32_t 1 已准备好 0 未准备好 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t CAN_TXBufferReady(CAN_TypeDef * CANx) +{ + return (CANx->SR & CAN_SR_TXBR_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_RXDataAvailable() +* 功能说明: RX FIFO中是否有数据可读出 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: uint32_t 1 有数据可读出 0 没有数据 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t CAN_RXDataAvailable(CAN_TypeDef * CANx) +{ + return (CANx->SR & CAN_SR_RXDA_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_SetBaudrate() +* 功能说明: 设置波特率 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t baudrate 波特率,即位传输速率 +* uint32_t CAN_bs1 CAN_BS1_1tq、CAN_BS1_2tq、... ... 、CAN_BS1_16tq +* uint32_t CAN_bs2 CAN_BS2_1tq、CAN_BS2_2tq、... ... 、CAN_BS2_8tq +* uint32_t CAN_sjw CAN_SJW_1tq、CAN_SJW_2tq、CAN_SJW_3tq、CAN_SJW_4tq +* 输 出: 无 +* 注意事项: 设置前需要先调用CAN_Close()关闭CAN模块 +******************************************************************************************************************************************/ +void CAN_SetBaudrate(CAN_TypeDef * CANx, uint32_t baudrate, uint32_t CAN_bs1, uint32_t CAN_bs2, uint32_t CAN_sjw) +{ + uint32_t brp = (SystemCoreClock/2)/2/baudrate/(1 + (CAN_bs1 + 1) + (CAN_bs2 + 1)) - 1; + + CANx->BT1 = (0 << CAN_BT1_SAM_Pos) | + (CAN_bs1 << CAN_BT1_TSEG1_Pos) | + (CAN_bs2 << CAN_BT1_TSEG2_Pos); + + CANx->BT0 = (CAN_sjw << CAN_BT0_SJW_Pos) | + ((brp & 0x3F) << CAN_BT0_BRP_Pos); + + CANx->BT2 = ((brp >> 6) << CAN_BT2_BRP_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_SetFilter32b() +* 功能说明: 设置接收滤波器,模式为1个32位滤波器 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t filter 要设置的滤波器,有效值有CAN_FILTER_1、CAN_FILTER_2、...、CAN_FILTER_16 +* uint32_t check 与mask一起决定了接收到的Message是否是自己需要的:check & mask == ID & mask的Message通过过滤 +* uint32_t mask +* 输 出: 无 +* 注意事项: 只能在关闭时设置 +******************************************************************************************************************************************/ +void CAN_SetFilter32b(CAN_TypeDef * CANx, uint32_t filter, uint32_t check, uint32_t mask) +{ + CANx->AFM |= (1 << filter); + + CANx->ACR[filter] = __REV(check << 3); // 高29位 + CANx->AMR[filter] = __REV(~(mask << 3)); + + CANx->AFE |= (1 << filter); +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_SetFilter16b() +* 功能说明: 设置接收滤波器,模式为2个16位滤波器 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t filter 要设置的滤波器,有效值有CAN_FILTER_1、CAN_FILTER_2、...、CAN_FILTER_16 +* uint16_t check1 与mask一起决定了接收到的Message是否是自己需要的:check & mask == ID & mask的Message通过过滤 +* uint16_t mask1 +* uint16_t check2 +* uint16_t mask2 +* 输 出: 无 +* 注意事项: 只能在关闭时设置 +******************************************************************************************************************************************/ +void CAN_SetFilter16b(CAN_TypeDef * CANx, uint32_t filter, uint16_t check1, uint16_t mask1, uint16_t check2, uint16_t mask2) +{ + CANx->AFM &= ~(1 << filter); + + CANx->ACR[filter] = __REV((check1 << 5) | (check2 << 21)); // 高11位 + CANx->AMR[filter] = __REV(~((mask1 << 5) | (mask2 << 21))); + + CANx->AFE |= (1 << filter); +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_INTEn() +* 功能说明: 使能指定中断 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t it interrupt type,有效值包括 CAN_IT_RX_NOTEMPTY、CAN_IT_RX_OVERFLOW、CAN_IT_TX_EMPTY、CAN_IT_ARBLOST、 +* CAN_IT_ERR、CAN_IT_ERR_WARN、CAN_IT_ERR_PASS、CAN_IT_WAKEUP 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_INTEn(CAN_TypeDef * CANx, uint32_t it) +{ + CANx->IE |= it; +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_INTDis() +* 功能说明: 关闭指定中断 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t it interrupt type,有效值包括 CAN_IT_RX_NOTEMPTY、CAN_IT_RX_OVERFLOW、CAN_IT_TX_EMPTY、CAN_IT_ARBLOST、 +* CAN_IT_ERR、CAN_IT_ERR_WARN、CAN_IT_ERR_PASS、CAN_IT_WAKEUP 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_INTDis(CAN_TypeDef * CANx, uint32_t it) +{ + CANx->IE &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_INTClr() +* 功能说明: 清除中断标志 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* uint32_t it interrupt type,有效值包括 CAN_IT_RX_OVERFLOW +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CAN_INTClr(CAN_TypeDef * CANx, uint32_t it) +{ + CANx->CMD = (1 << CAN_CMD_CLROV_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CAN_INTStat() +* 功能说明: 查询中断状态 +* 输 入: CAN_TypeDef * CANx 指定要被设置的CAN接口,有效值包括CAN0、CAN1 +* 输 出: uint32_t 当前中断状态 +* 注意事项: CANx->IF读取清零,因此在中断ISR中只能读取一次,不能多次读取 +******************************************************************************************************************************************/ +uint32_t CAN_INTStat(CAN_TypeDef * CANx) +{ + return CANx->IF; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_can.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_can.h new file mode 100644 index 0000000000..0d0018b5c3 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_can.h @@ -0,0 +1,121 @@ +#ifndef __SWM341_CAN_H__ +#define __SWM341_CAN_H__ + + +typedef struct { + uint8_t Mode; //CAN_MODE_NORMAL、CAN_MODE_LISTEN、CAN_MODE_SELFTEST + uint8_t CAN_bs1; //CAN_BS1_1tq、CAN_BS1_2tq、... ... 、CAN_BS1_16tq + uint8_t CAN_bs2; //CAN_BS2_1tq、CAN_BS2_2tq、... ... 、CAN_BS2_8tq + uint8_t CAN_sjw; //CAN_SJW_1tq、CAN_SJW_2tq、CAN_SJW_3tq、CAN_SJW_4tq + uint32_t Baudrate; //波特率,即位传输速率,取值1--1000000 + uint8_t RXNotEmptyIEn; //接收FIFO非空,有数据可读 + uint8_t ArbitrLostIEn; //控制器丢失仲裁变成接收方 + uint8_t ErrPassiveIEn; //接收/发送错误计数值达到127 +} CAN_InitStructure; + + +#define CAN_MODE_NORMAL 0 //常规模式 +#define CAN_MODE_LISTEN 1 //监听模式 +#define CAN_MODE_SELFTEST 2 //自测模式 + +#define CAN_BS1_1tq 0 +#define CAN_BS1_2tq 1 +#define CAN_BS1_3tq 2 +#define CAN_BS1_4tq 3 +#define CAN_BS1_5tq 4 +#define CAN_BS1_6tq 5 +#define CAN_BS1_7tq 6 +#define CAN_BS1_8tq 7 +#define CAN_BS1_9tq 8 +#define CAN_BS1_10tq 9 +#define CAN_BS1_11tq 10 +#define CAN_BS1_12tq 11 +#define CAN_BS1_13tq 12 +#define CAN_BS1_14tq 13 +#define CAN_BS1_15tq 14 +#define CAN_BS1_16tq 15 + +#define CAN_BS2_1tq 0 +#define CAN_BS2_2tq 1 +#define CAN_BS2_3tq 2 +#define CAN_BS2_4tq 3 +#define CAN_BS2_5tq 4 +#define CAN_BS2_6tq 5 +#define CAN_BS2_7tq 6 +#define CAN_BS2_8tq 7 + +#define CAN_SJW_1tq 0 +#define CAN_SJW_2tq 1 +#define CAN_SJW_3tq 2 +#define CAN_SJW_4tq 3 + +#define CAN_FRAME_STD 0 +#define CAN_FRAME_EXT 1 + +#define CAN_FILTER_1 0 +#define CAN_FILTER_2 1 +#define CAN_FILTER_3 2 +#define CAN_FILTER_4 3 +#define CAN_FILTER_5 4 +#define CAN_FILTER_6 5 +#define CAN_FILTER_7 6 +#define CAN_FILTER_8 7 +#define CAN_FILTER_9 8 +#define CAN_FILTER_10 9 +#define CAN_FILTER_11 10 +#define CAN_FILTER_12 11 +#define CAN_FILTER_13 12 +#define CAN_FILTER_14 13 +#define CAN_FILTER_15 14 +#define CAN_FILTER_16 15 + + +/* Interrupt Type */ +#define CAN_IT_RX_NOTEMPTY (0x01 << 0) //RX Buffer Not Empty +#define CAN_IT_RX_OVERFLOW (0x01 << 3) //RX Buffer Overflow +#define CAN_IT_TX_EMPTY (0x01 << 1) //TX Buffer Empty +#define CAN_IT_ARBLOST (0x01 << 6) //Arbitration lost +#define CAN_IT_ERR (0x01 << 7) +#define CAN_IT_ERR_WARN (0x01 << 2) //TXERR/RXERR计数值达到Error Warning Limit +#define CAN_IT_ERR_PASS (0x01 << 5) //TXERR/RXERR计数值达到127 +#define CAN_IT_WAKEUP (0x01 << 4) + + + +typedef struct { + uint32_t id; //消息ID + uint8_t format; //帧格式:CAN_FRAME_STD、CAN_FRAME_EXT + uint8_t remote; //消息是否为远程帧 + uint8_t size; //接收到的数据个数 + uint8_t data[8]; //接收到的数据 +} CAN_RXMessage; + + +void CAN_Init(CAN_TypeDef * CANx, CAN_InitStructure * initStruct); +void CAN_Open(CAN_TypeDef * CANx); +void CAN_Close(CAN_TypeDef * CANx); + +void CAN_Transmit(CAN_TypeDef * CANx, uint32_t format, uint32_t id, uint8_t data[], uint32_t size, uint32_t once); +void CAN_TransmitRequest(CAN_TypeDef * CANx, uint32_t format, uint32_t id, uint32_t once); +void CAN_Receive(CAN_TypeDef * CANx, CAN_RXMessage *msg); + +uint32_t CAN_TXComplete(CAN_TypeDef * CANx); +uint32_t CAN_TXSuccess(CAN_TypeDef * CANx); + +void CAN_AbortTransmit(CAN_TypeDef * CANx); + +uint32_t CAN_TXBufferReady(CAN_TypeDef * CANx); +uint32_t CAN_RXDataAvailable(CAN_TypeDef * CANx); + +void CAN_SetBaudrate(CAN_TypeDef * CANx, uint32_t baudrate, uint32_t CAN_bs1, uint32_t CAN_bs2, uint32_t CAN_sjw); + +void CAN_SetFilter32b(CAN_TypeDef * CANx, uint32_t filter, uint32_t check, uint32_t mask); +void CAN_SetFilter16b(CAN_TypeDef * CANx, uint32_t filter, uint16_t check1, uint16_t mask1, uint16_t check2, uint16_t mask2); + +void CAN_INTEn(CAN_TypeDef * CANx, uint32_t it); +void CAN_INTDis(CAN_TypeDef * CANx, uint32_t it); +void CAN_INTClr(CAN_TypeDef * CANx, uint32_t it); +uint32_t CAN_INTStat(CAN_TypeDef * CANx); + + +#endif //__SWM341_CAN_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_cordic.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_cordic.c new file mode 100644 index 0000000000..931d70ef31 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_cordic.c @@ -0,0 +1,40 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_cordic.c +* 功能说明: SWM341单片机的CORDIC功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_cordic.h" + + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Init() +* 功能说明: CORDIC初始化 +* 输 入: CORDIC_TypeDef * CORDICx 指定要被设置的CORDIC,有效值包括CORDIC +* 输 出: 无 +* 注意事项: CORDIC模块依赖DIV模块,因为CORDIC_Arctan()要使用硬件除法模块计算参数值 +******************************************************************************************************************************************/ +void CORDIC_Init(CORDIC_TypeDef * CORDICx) +{ + switch((uint32_t)CORDICx) + { + case ((uint32_t)CORDIC): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_CORDIC_Pos); + break; + } +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_cordic.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_cordic.h new file mode 100644 index 0000000000..95480f081f --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_cordic.h @@ -0,0 +1,216 @@ +#ifndef __SWM341_CORDIC_H__ +#define __SWM341_CORDIC_H__ + +#define CORDIC_PI 3.141592653589793 + +void CORDIC_Init(CORDIC_TypeDef * CORDICx); + + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Sin() +* 功能说明: 使用CORDIC模块计算sin +* 输 入: uint32_t radian 要计算sin值的角度,以弧度为单位,取值范围0.01~1.56;但需要将弧度值乘以16384作为参数调用此函数 +* 输 出: 无 +* 注意事项: 需要将弧度值乘以16384作为参数调用此函数 +******************************************************************************************************************************************/ +static __INLINE void CORDIC_Sin(uint32_t radian) +{ + CORDIC->INPUT = radian; + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (1 << CORDIC_CMD_SINCOS_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Sin_IsDone() +* 功能说明: CORDIC模块sin运算是否完成 +* 输 入: 无 +* 输 出: uint32_t 0 sin运算未完成 1 sin运算已完成,可取出运算结果 +* 注意事项: +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Sin_IsDone(void) +{ + return (CORDIC->SIN & CORDIC_SIN_DONE_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Sin_Result() +* 功能说明: 取出CORDIC模块sin运算结果 +* 输 入: 无 +* 输 出: uint32_t sin运算结果,Result[15:14]表示整数部分,Result[13:0]表示小数部分 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Sin_Result(void) +{ + return CORDIC->SIN & (CORDIC_SIN_F_Msk | CORDIC_SIN_I_Msk); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Cos() +* 功能说明: 使用CORDIC模块计算cos +* 输 入: uint32_t radian 要计算cos值的角度,以弧度为单位,取值范围0.01~1.56;但需要将弧度值乘以16384作为参数调用此函数 +* 输 出: 无 +* 注意事项: 需要将弧度值乘以16384作为参数调用此函数 +******************************************************************************************************************************************/ +static __INLINE void CORDIC_Cos(uint32_t radian) +{ + CORDIC->INPUT = radian; + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (1 << CORDIC_CMD_SINCOS_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Cos_IsDone() +* 功能说明: CORDIC模块cos运算是否完成 +* 输 入: 无 +* 输 出: uint32_t 0 cos运算未完成 1 cos运算已完成,可取出运算结果 +* 注意事项: +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Cos_IsDone(void) +{ + return (CORDIC->COS & CORDIC_COS_DONE_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Cos_Result() +* 功能说明: 取出CORDIC模块cos运算结果 +* 输 入: 无 +* 输 出: uint32_t cos运算结果,Result[15:14]表示整数部分,Result[13:0]表示小数部分 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Cos_Result(void) +{ + return CORDIC->COS & (CORDIC_COS_F_Msk | CORDIC_COS_I_Msk); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Arctan() +* 功能说明: 使用CORDIC模块计算arctan +* 输 入: uint32_t input 取值范围0.05~10000,但需要将其乘以16384作为参数调用此函数 +* 输 出: 无 +* 注意事项: 需要将待计算值乘以16384作为参数调用此函数 +******************************************************************************************************************************************/ +static __INLINE void CORDIC_Arctan(uint32_t input) +{ + if((input > 819) && (input <= 8192)) + { + CORDIC->INPUT = input * 2; + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (0 << CORDIC_CMD_SINCOS_Pos) | (0 << CORDIC_CMD_RANGE_Pos); + } + else if((input > 8192) && (input <= 32768)) + { + CORDIC->INPUT = input; + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (0 << CORDIC_CMD_SINCOS_Pos) | (1 << CORDIC_CMD_RANGE_Pos); + } + else if((input > 32768) && (input < 10000*16384)) + { + CORDIC->INPUT = 32768*16384/input; + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (0 << CORDIC_CMD_SINCOS_Pos) | (2 << CORDIC_CMD_RANGE_Pos); + } +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Arctan_IsDone() +* 功能说明: CORDIC模块arctan运算是否完成 +* 输 入: 无 +* 输 出: uint32_t 0 arctan运算未完成 1 arctan运算已完成,可取出运算结果 +* 注意事项: +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Arctan_IsDone(void) +{ + return (CORDIC->ARCTAN & CORDIC_ARCTAN_DONE_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Arctan_Result() +* 功能说明: 取出CORDIC模块arctan运算结果 +* 输 入: 无 +* 输 出: uint32_t arctan运算结果,为弧度值,Result[15:14]表示整数部分,Result[13:0]表示小数部分 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Arctan_Result(void) +{ + return CORDIC->ARCTAN & (CORDIC_ARCTAN_F_Msk | CORDIC_ARCTAN_I_Msk); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Mul() +* 功能说明: 使用CORDIC模块计算乘法 +* 输 入: uint16_t mul1 乘数1 +* uint16_t mul2 乘数2 +* 输 出: 无 +* 注意事项: 需要将乘数乘以16384作为参数调用此函数 +******************************************************************************************************************************************/ +static __INLINE void CORDIC_Mul(uint16_t mul1, uint16_t mul2) +{ + CORDIC->INPUT = mul1 | (mul2 << 16); + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (3 << CORDIC_CMD_MULDIV_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Mul_IsDone() +* 功能说明: CORDIC模块乘法运算是否完成 +* 输 入: 无 +* 输 出: uint32_t 0 乘法运算未完成 1 乘法运算已完成,可取出运算结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Mul_IsDone(void) +{ + return (CORDIC->SIN & CORDIC_SIN_DONE_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Mul_Result() +* 功能说明: 取出CORDIC模块乘法运算结果 +* 输 入: 无 +* 输 出: uint32_t 乘法运算结果,Result[15:14]表示整数部分,Result[13:0]表示小数部分 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Mul_Result(void) +{ + return CORDIC->SIN & (CORDIC_SIN_F_Msk | CORDIC_SIN_I_Msk); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Div() +* 功能说明: 使用CORDIC模块计算除法 +* 输 入: uint16_t dividend 被除数 +* uint16_t divisor 除数 +* 输 出: 无 +* 注意事项: 需要将除数和被除数值乘以16384作为参数调用此函数 +******************************************************************************************************************************************/ +static __INLINE void CORDIC_Div(uint16_t dividend, uint16_t divisor) +{ + CORDIC->INPUT = divisor | (dividend << 16); + + CORDIC->CMD = (1 << CORDIC_CMD_START_Pos) | (2 << CORDIC_CMD_MULDIV_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Div_IsDone() +* 功能说明: CORDIC模块除法运算是否完成 +* 输 入: 无 +* 输 出: uint32_t 0 除法运算未完成 1 除法运算已完成,可取出运算结果 +* 注意事项: +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Div_IsDone(void) +{ + return (CORDIC->ARCTAN & CORDIC_ARCTAN_DONE_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: CORDIC_Div_Result() +* 功能说明: 取出CORDIC模块除法运算结果 +* 输 入: 无 +* 输 出: uint32_t 除法运算结果,为弧度值,Result[15:14]表示整数部分,Result[13:0]表示小数部分 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CORDIC_Div_Result(void) +{ + return CORDIC->ARCTAN & (CORDIC_ARCTAN_F_Msk | CORDIC_ARCTAN_I_Msk); +} + +#endif //__SWM341_CORDIC_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_crc.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_crc.c new file mode 100644 index 0000000000..b1b2fb32e8 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_crc.c @@ -0,0 +1,67 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_crc.c +* 功能说明: SWM341单片机的CRC模块驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_crc.h" + + +/****************************************************************************************************************************************** +* 函数名称: CRC_Init() +* 功能说明: CRC 初始化 +* 输 入: CRC_TypeDef * CRCx 指定要被设置的CRC接口,有效值包括CRC +* CRC_InitStructure * initStruct 包含CRC相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CRC_Init(CRC_TypeDef * CRCx, CRC_InitStructure * initStruct) +{ + switch((uint32_t)CRCx) + { + case ((uint32_t)CRC): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_CRC_Pos); + break; + } + + CRCx->INIVAL = initStruct->init_crc; + + CRCx->CR = (1 << CRC_CR_EN_Pos) | + (initStruct->Poly << CRC_CR_POLY_Pos) | + (initStruct->in_width << CRC_CR_IBIT_Pos) | + (initStruct->in_rev << CRC_CR_IREV_Pos) | + (initStruct->in_not << CRC_CR_INOT_Pos) | + (initStruct->out_rev << CRC_CR_OREV_Pos) | + (initStruct->out_not << CRC_CR_ONOT_Pos); +} + + +/****************************************************************************************************************************************** +* 函数名称: CRC_SetInitVal() +* 功能说明: 设置CRC计算初始值 +* 输 入: CRC_TypeDef * CRCx 指定要被设置的CRC接口,有效值包括CRC +* uint32_t init_crc CRC计算初始值 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void CRC_SetInitVal(CRC_TypeDef * CRCx, uint32_t init_crc) +{ + CRCx->INIVAL = init_crc; + + CRCx->CR |= (1 << CRC_CR_EN_Pos); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_crc.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_crc.h new file mode 100644 index 0000000000..c695661e68 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_crc.h @@ -0,0 +1,59 @@ +#ifndef __SWM341_CRC_H__ +#define __SWM341_CRC_H__ + + +typedef struct { + uint32_t init_crc; // 初始值 + uint8_t Poly; // CRC多项式,可取值CRC_POLY_11021、CRC_POLY_107、CRC_POLY_18005、CRC_POLY_104C11DB7 + uint8_t in_width; // 输入数据宽度,可取值CRC_WIDTH_32、CRC_WIDTH_16、CRC_WIDTH_8 + uint8_t in_rev; // 输入数据翻转,可取值CRC_REV_NOT、CRC_REV_ALL、CRC_REV_IN_BYTE、CRC_REV_BYTE + bool in_not; // 输入数据取反 + uint8_t out_rev; // 输出结果翻转,可取值CRC_REV_NOT、CRC_REV_ALL、CRC_REV_IN_BYTE、CRC_REV_BYTE + bool out_not; // 输出结果取反 +} CRC_InitStructure; + + +#define CRC_POLY_11021 0 // x^16+x^12+x^5+1 +#define CRC_POLY_107 1 // x^8+x^2+x+1 +#define CRC_POLY_18005 2 // x^16+x^15+x^2+1 +#define CRC_POLY_104C11DB7 3 // x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1 + +#define CRC_WIDTH_32 0 +#define CRC_WIDTH_16 1 +#define CRC_WIDTH_8 2 + +#define CRC_REV_NOT 0 // bit顺序不变 +#define CRC_REV_ALL 1 // bit顺序完全翻转 +#define CRC_REV_IN_BYTE 2 // bit顺序字节内翻转 +#define CRC_REV_BYTE 3 // 仅字节顺序翻转 + + +void CRC_Init(CRC_TypeDef * CRCx, CRC_InitStructure * initStruct); +void CRC_SetInitVal(CRC_TypeDef * CRCx, uint32_t init_crc); + + +/****************************************************************************************************************************************** +* 函数名称: CRC_Write() +* 功能说明: CRC写入数据 +* 输 入: uint32_t data 要写入的数据 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE void CRC_Write(uint32_t data) +{ + CRC->DATAIN = data; +} + +/****************************************************************************************************************************************** +* 函数名称: CRC_Result() +* 功能说明: 获取CRC计算结果 +* 输 入: 无 +* 输 出: uint32_t CRC 计算结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t CRC_Result(void) +{ + return CRC->RESULT; +} + +#endif //__SWM341_CRC_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dac.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dac.c new file mode 100644 index 0000000000..6a56b578cd --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dac.c @@ -0,0 +1,70 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_dac.c +* 功能说明: SWM341单片机的DAC模块驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_dac.h" + + +/****************************************************************************************************************************************** +* 函数名称: DAC_Init() +* 功能说明: DAC 初始化 +* 输 入: DAC_TypeDef * DACx 指定要被设置的DAC接口,有效值包括DAC +* uint32_t format 数据格式,可取值DAC_FORMAT_LSB12B、DAC_FORMAT_MSB12B、DAC_FORMAT_8B +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DAC_Init(DAC_TypeDef * DACx, uint32_t format) +{ + switch((uint32_t)DACx) + { + case ((uint32_t)DAC): + SYS->CLKEN1 |= (0x01 << SYS_CLKEN1_DAC_Pos); + break; + } + + SYS->DACCR &= ~SYS_DACCR_VRADJ_Msk; + SYS->DACCR |= ((SYS->BACKUP[2] & 0x1F) << SYS_DACCR_VRADJ_Pos); + + DACx->CR = (format << DAC_CR_DHRFMT_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DAC_Open() +* 功能说明: DAC 开启 +* 输 入: DAC_TypeDef * DACx 指定要被设置的DAC接口,有效值包括DAC +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DAC_Open(DAC_TypeDef * DACx) +{ + DACx->CR |= (1 << DAC_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DAC_Close() +* 功能说明: DAC 关闭 +* 输 入: DAC_TypeDef * DACx 指定要被设置的DAC接口,有效值包括DAC +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DAC_Close(DAC_TypeDef * DACx) +{ + DACx->CR &= ~DAC_CR_EN_Msk; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dac.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dac.h new file mode 100644 index 0000000000..4f3887d8f7 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dac.h @@ -0,0 +1,15 @@ +#ifndef __SWM341_DAC_H__ +#define __SWM341_DAC_H__ + + +#define DAC_FORMAT_LSB12B 0 //12位数据,DHR[11:0] => DOR[11:0] +#define DAC_FORMAT_MSB12B 1 //12位数据,DHR[15:4] => DOR[11:0] +#define DAC_FORMAT_8B 3 // 8位数据,DHR[7 :0] => DOR[11:4] + + +void DAC_Init(DAC_TypeDef * DACx, uint32_t format); +void DAC_Open(DAC_TypeDef * DACx); +void DAC_Close(DAC_TypeDef * DACx); + + +#endif //__SWM341_DAC_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_div.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_div.c new file mode 100644 index 0000000000..1c2bfe9602 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_div.c @@ -0,0 +1,40 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_div.c +* 功能说明: SWM341单片机的DIV硬件除法功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_div.h" + + +/****************************************************************************************************************************************** +* 函数名称: DIV_Init() +* 功能说明: 硬件除法器初始化 +* 输 入: DIV_TypeDef * DIVx 指定要被设置的硬件除法器,有效值包括DIV +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DIV_Init(DIV_TypeDef * DIVx) +{ + switch((uint32_t)DIVx) + { + case ((uint32_t)DIV): + SYS->CLKEN0 |= (0x01u<< SYS_CLKEN0_DIV_Pos); + break; + } +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_div.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_div.h new file mode 100644 index 0000000000..d459690583 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_div.h @@ -0,0 +1,129 @@ +#ifndef __SWM341_DIV_H__ +#define __SWM341_DIV_H__ + + +void DIV_Init(DIV_TypeDef * DIVx); + + +/****************************************************************************************************************************************** +* 函数名称: DIV_UDiv() +* 功能说明: 使用硬件除法器执行无符号数除法运算 +* 输 入: uint32_t dividend 被除数 +* uint32_t divisor 除数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE void DIV_UDiv(uint32_t dividend, uint32_t divisor) +{ + DIV->DIVIDEND = dividend; + DIV->DIVISOR = divisor; + + DIV->CR = (1 << DIV_CR_DIVSIGN_Pos) | (1 << DIV_CR_DIVGO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_SDiv() +* 功能说明: 使用硬件除法器执行有符号数除法运算 +* 输 入: int32_t dividend 被除数 +* int32_t divisor 除数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE void DIV_SDiv(int32_t dividend, int32_t divisor) +{ + DIV->DIVIDEND = dividend; + DIV->DIVISOR = divisor; + + DIV->CR = (0 << DIV_CR_DIVSIGN_Pos) | (1 << DIV_CR_DIVGO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_Div_IsBusy() +* 功能说明: 硬件除法器是否正在执行除法运算 +* 输 入: 无 +* 输 出: uint32_t 1 硬件除法器正在执行除法运算 0 硬件除法器已完成除法运算,可取出运算结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t DIV_Div_IsBusy(void) +{ + return (DIV->SR & DIV_SR_DIVBUSY_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_UDiv_Result() +* 功能说明: 取出硬件除法器的运算结果 +* 输 入: 无 +* 输 出: uint32_t *quotient 商 +* uint32_t *remainder 余数 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE void DIV_UDiv_Result(uint32_t *quotient, uint32_t *remainder) +{ + *quotient = DIV->QUO; + *remainder = DIV->REMAIN; +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_SDiv_Result() +* 功能说明: 取出硬件除法器的运算结果 +* 输 入: 无 +* 输 出: int32_t *quotient 商 +* int32_t *remainder 余数 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE void DIV_SDiv_Result(int32_t *quotient, int32_t *remainder) +{ + *quotient = DIV->QUO & 0x7FFFFFFF; + if(DIV->QUO & (1u << 31)) *quotient = 0 - *quotient; + + *remainder = DIV->REMAIN & 0x7FFFFFFF; + if(DIV->REMAIN & (1u << 31)) *remainder = 0 - *remainder; +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_Root() +* 功能说明: 使用硬件开方模块执行开方运算 +* 输 入: uint32_t radicand 被开方数 +* uint32_t calcu_frac 0 开方结果为16位整数 1 开方结果为16位整数+16位小数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE void DIV_Root(uint32_t radicand, uint32_t calcu_fractional) +{ + DIV->RADICAND = radicand; + + DIV->CR = (1 << DIV_CR_ROOTGO_Pos) | (calcu_fractional << DIV_CR_ROOTMOD_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_Root_IsBusy() +* 功能说明: 硬件开方模块是否正在执行开方运算 +* 输 入: 无 +* 输 出: uint32_t 1 硬件开方模块正在执行开方运算 0 硬件开方模块已完成开方运算,可取出运算结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t DIV_Root_IsBusy(void) +{ + return (DIV->SR & DIV_SR_ROOTBUSY_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: DIV_Root_Result() +* 功能说明: 取出硬件开方模块的运算结果 +* 输 入: 无 +* 输 出: uint32_t 开方结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +static __INLINE uint32_t DIV_Root_Result(void) +{ + if(DIV->CR & DIV_CR_ROOTMOD_Msk) + { + return DIV->ROOT; + } + else + { + return DIV->ROOT >> 16; + } +} + +#endif //__SWM341_DIV_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma.c new file mode 100644 index 0000000000..b84dd9f722 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma.c @@ -0,0 +1,242 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_dma.c +* 功能说明: SWM341单片机的DMA功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_dma.h" + + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_Init() +* 功能说明: DMA通道初始化 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* DMA_InitStructure * initStruct 包含DMA通道相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_Init(uint32_t chn, DMA_InitStructure * initStruct) +{ + DMA->EN = 1; //每个通道都有自己独立的开关控制,所以总开关可以是一直开启的 + + DMA_CH_Close(chn); //关闭后配置 + + DMA->CH[chn].CR = (initStruct->Mode << DMA_CR_AUTORE_Pos) | + ((initStruct->Count ? initStruct->Count - 1 : 0) << DMA_CR_LEN_Pos); + + DMA->CH[chn].SRC = initStruct->SrcAddr; + DMA->CH[chn].DST = initStruct->DstAddr; + + DMA->CH[chn].AM = (initStruct->SrcAddrInc << DMA_AM_SRCAM_Pos) | + (initStruct->DstAddrInc << DMA_AM_DSTAM_Pos) | + (initStruct->Unit << DMA_AM_SRCBIT_Pos) | + (initStruct->Unit << DMA_AM_DSTBIT_Pos); + + switch(initStruct->Handshake & DMA_HS_MSK) + { + case DMA_HS_NO: + DMA->CH[chn].MUX = 0; + break; + + case DMA_HS_SRC: + DMA->CH[chn].MUX = ((initStruct->Handshake & 0xF) << DMA_MUX_SRCHSSIG_Pos) | (1 << DMA_MUX_SRCHSEN_Pos); + break; + + case DMA_HS_DST: + DMA->CH[chn].MUX = ((initStruct->Handshake & 0xF) << DMA_MUX_DSTHSSIG_Pos) | (1 << DMA_MUX_DSTHSEN_Pos); + break; + + case DMA_HS_EXT: + DMA->CH[chn].MUX = ((initStruct->Handshake & 0xF) << DMA_MUX_EXTHSSIG_Pos) | (1 << DMA_MUX_EXTHSEN_Pos); + DMA->CH[chn].CR |= (1 << DMA_CR_STEPOP_Pos); + break; + + default: + break; + } + + int totalBytes = initStruct->Count * (1 << initStruct->Unit); + + if(initStruct->DstAddrInc == 2) // Destination Scatter-Gather Transfer + { + DMA->CH[chn].DSTSGADDR1 = initStruct->DstAddr + totalBytes / 4 * 1; + DMA->CH[chn].DSTSGADDR2 = initStruct->DstAddr + totalBytes / 4 * 2; + DMA->CH[chn].DSTSGADDR3 = initStruct->DstAddr + totalBytes / 4 * 3; + } + if(initStruct->SrcAddrInc == 2) // Source Scatter-Gather Transfer + { + DMA->CH[chn].SRCSGADDR1 = initStruct->SrcAddr + totalBytes / 4 * 1; + DMA->CH[chn].SRCSGADDR2 = initStruct->SrcAddr + totalBytes / 4 * 2; + DMA->CH[chn].SRCSGADDR3 = initStruct->SrcAddr + totalBytes / 4 * 3; + } + + DMA->PRI &= ~(1 << chn); + DMA->PRI |= (initStruct->Priority << chn); + + DMA->IM |= (1 << chn); // 默认全部关闭 + DMA->DSTSGIM |= (3 << (chn * 2)); + DMA->SRCSGIM |= (3 << (chn * 2)); + DMA->IE |= (1 << chn); // 标志总是可查 + DMA->DSTSGIE |= (3 << (chn * 2)); + DMA->SRCSGIE |= (3 << (chn * 2)); + + DMA_CH_INTClr(chn, initStruct->INTEn); + DMA_CH_INTEn(chn, initStruct->INTEn); + + if(initStruct->INTEn) NVIC_EnableIRQ(DMA_IRQn); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_Open() +* 功能说明: DMA通道开启,对于软件启动通道,开启后立即传输;对于硬件触发通道,开启后还需等出现触发信号后才开始搬运 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_Open(uint32_t chn) +{ + DMA->CH[chn].CR |= (1 << DMA_CR_RXEN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_Close() +* 功能说明: DMA通道关闭 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_Close(uint32_t chn) +{ + DMA->CH[chn].CR &= ~(DMA_CR_TXEN_Msk | DMA_CR_RXEN_Msk); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_SetCount() +* 功能说明: 设置传输 Unit 个数 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t count 传输 Unit 个数,最大取值0x100000 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_SetCount(uint32_t chn, uint32_t count) +{ + DMA->CH[chn].CR &= ~DMA_CR_LEN_Msk; + DMA->CH[chn].CR |= ((count - 1) << DMA_CR_LEN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_GetRemaining() +* 功能说明: 查询剩余的传输 Unit 个数 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* 输 出: uint32_t 剩余的传输 Unit 个数 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t DMA_CH_GetRemaining(uint32_t chn) +{ + return (DMA->CH[chn].DSTSR & DMA_DSTSR_LEN_Msk); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_SetSrcAddress() +* 功能说明: 设置传输源地址 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t address 源地址 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_SetSrcAddress(uint32_t chn, uint32_t address) +{ + DMA->CH[chn].SRC = address; +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_SetDstAddress() +* 功能说明: 设置传输目的地址 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t address 目的地址 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_SetDstAddress(uint32_t chn, uint32_t address) +{ + DMA->CH[chn].DST = address; +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_INTEn() +* 功能说明: DMA中断使能 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t it interrupt type,有效值有 DMA_IT_DONE、DMA_IT_DSTSG_HALF、DMA_IT_DSTSG_DONE、DMA_IT_SRCSG_HALF、 +* DMA_IT_SRCSG_DONE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_INTEn(uint32_t chn, uint32_t it) +{ + DMA->IM &= ~(it << chn); + DMA->DSTSGIM &= ~((it >> 8) << (chn * 2)); + DMA->SRCSGIM &= ~((it >> 16) << (chn * 2)); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_INTDis() +* 功能说明: DMA中断禁止 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t it interrupt type,有效值有 DMA_IT_DONE、DMA_IT_DSTSG_HALF、DMA_IT_DSTSG_DONE、DMA_IT_SRCSG_HALF、 +* DMA_IT_SRCSG_DONE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_INTDis(uint32_t chn, uint32_t it) +{ + DMA->IM |= (it << chn); + DMA->DSTSGIM |= ((it >> 8) << (chn * 2)); + DMA->SRCSGIM |= ((it >> 16) << (chn * 2)); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_INTClr() +* 功能说明: DMA中断标志清除 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t it interrupt type,有效值有 DMA_IT_DONE、DMA_IT_DSTSG_HALF、DMA_IT_DSTSG_DONE、DMA_IT_SRCSG_HALF、 +* DMA_IT_SRCSG_DONE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA_CH_INTClr(uint32_t chn, uint32_t it) +{ + DMA->IF = (it << chn); + DMA->DSTSGIF = ((it >> 8) << (chn * 2)); + DMA->SRCSGIF = ((it >> 16) << (chn * 2)); +} + +/****************************************************************************************************************************************** +* 函数名称: DMA_CH_INTStat() +* 功能说明: DMA中断状态查询 +* 输 入: uint32_t chn 指定要配置的通道,有效值有DMA_CH0、DMA_CH1、DMA_CH2、DMA_CH3 +* uint32_t it interrupt type,有效值有 DMA_IT_DONE、DMA_IT_DSTSG_HALF、DMA_IT_DSTSG_DONE、DMA_IT_SRCSG_HALF、 +* DMA_IT_SRCSG_DONE 及其“或” +* 输 出: uint32_t 1 指定中断已发生 0 指定中断未发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t DMA_CH_INTStat(uint32_t chn, uint32_t it) +{ + return ((DMA->IF & (it << chn)) || + (DMA->DSTSGIF & ((it >> 8) << (chn * 2))) || + (DMA->SRCSGIF & ((it >> 16) << (chn * 2)))); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma.h new file mode 100644 index 0000000000..db9314620a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma.h @@ -0,0 +1,124 @@ +#ifndef __SWM341_DMA_H__ +#define __SWM341_DMA_H__ + + +typedef struct { + uint8_t Mode; //DMA_MODE_SINGLE、DMA_MODE_CIRCLE + + uint8_t Unit; //DMA_UNIT_BYTE、DMA_UNIT_HALFWORD、DMA_UNIT_WORD + + uint32_t Count; //传输 Unit 个数,最大取值0x100000 + + uint32_t SrcAddr; + + uint32_t DstAddr; + + uint8_t SrcAddrInc; //0 地址固定 1 地址递增 + + uint8_t DstAddrInc; + + uint8_t Handshake; //传输握手信号:DMA_HS_NO、DMA_CH0_UART0TX、DMA_CH0_SPI0TX、... ... + + uint8_t Priority; //DMA_PRI_LOW、DMA_PRI_HIGH + + uint32_t INTEn; //中断使能,有效值有 DMA_IT_DONE、DMA_IT_DSTSG_HALF、DMA_IT_DSTSG_DONE、DMA_IT_SRCSG_HALF、DMA_IT_SRCSG_DONE 及其“或” +} DMA_InitStructure; + + +#define DMA_CH0 0 +#define DMA_CH1 1 +#define DMA_CH2 2 +#define DMA_CH3 3 + +#define DMA_MODE_SINGLE 0 // 单次模式,传输完成后停止 +#define DMA_MODE_CIRCLE 1 // 环形模式,传输完成后从头执行下一轮传输 + +#define DMA_UNIT_BYTE 0 +#define DMA_UNIT_HALFWORD 1 +#define DMA_UNIT_WORD 2 + +#define DMA_PRI_LOW 0 +#define DMA_PRI_HIGH 1 + + +#define DMA_HS_NO (0 << 4) // 无握手(Handshake)信号,启动传输后全部传完 +#define DMA_HS_SRC (1 << 4) // 源 侧握手信号,启动传输后源 侧生成一个数据,DMA搬运一个Unit +#define DMA_HS_DST (2 << 4) // 目标侧握手信号,启动传输后目标侧索取一个数据,DMA搬运一个Unit +#define DMA_HS_EXT (4 << 4) // 外部 握手信号,启动传输后外部握手来一个脉冲,DMA搬运一个Unit +#define DMA_HS_MSK (7 << 4) + +#define DMA_DIR_RX (0 << 7) // SRC --> DST +#define DMA_DIR_TX (1 << 7) // DST --> SRC +#define DMA_DIR_MSK (1 << 7) + +// 源侧外设 +#define DMA_CH0_UART1RX (0 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH0_SPI1RX (1 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH0_UART2RX (2 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH0_ADC0 (3 | DMA_HS_SRC | DMA_DIR_RX) + +#define DMA_CH1_UART0RX (0 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH1_SPI0RX (1 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH1_UART3RX (2 | DMA_HS_SRC | DMA_DIR_RX) + +#define DMA_CH2_UART3RX (0 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH2_SPI0RX (1 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH2_UART0RX (2 | DMA_HS_SRC | DMA_DIR_RX) + +#define DMA_CH3_UART2RX (0 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH3_SPI1RX (1 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH3_UART1RX (2 | DMA_HS_SRC | DMA_DIR_RX) +#define DMA_CH3_ADC1 (3 | DMA_HS_SRC | DMA_DIR_RX) + +// 目标侧外设 +#define DMA_CH0_UART0TX (0 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH0_SPI0TX (1 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH0_UART3TX (2 | DMA_HS_DST | DMA_DIR_RX) + +#define DMA_CH1_UART1TX (0 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH1_SPI1TX (1 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH1_UART2TX (2 | DMA_HS_DST | DMA_DIR_RX) + +#define DMA_CH2_UART2TX (0 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH2_SPI1TX (1 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH2_UART1TX (2 | DMA_HS_DST | DMA_DIR_RX) + +#define DMA_CH3_UART3TX (0 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH3_SPI0TX (1 | DMA_HS_DST | DMA_DIR_RX) +#define DMA_CH3_UART0TX (2 | DMA_HS_DST | DMA_DIR_RX) + +// 外部握手信号 +#define DMA_EXHS_TIMR0 (0 | DMA_HS_EXT | DMA_DIR_RX) +#define DMA_EXHS_TIMR1 (1 | DMA_HS_EXT | DMA_DIR_RX) +#define DMA_EXHS_TIMR2 (2 | DMA_HS_EXT | DMA_DIR_RX) +#define DMA_EXHS_TIMR3 (3 | DMA_HS_EXT | DMA_DIR_RX) +#define DMA_EXHS_TIMR4 (4 | DMA_HS_EXT | DMA_DIR_RX) +#define DMA_EXHS_TRIG0 (5 | DMA_HS_EXT | DMA_DIR_RX) // DMA_TRIG0引脚 +#define DMA_EXHS_TRIG1 (6 | DMA_HS_EXT | DMA_DIR_RX) // DMA_TRIG1引脚 + + +/* Interrupt Type */ +#define DMA_IT_DONE (1 << 0) //Transfer Done +#define DMA_IT_DSTSG_HALF (1 << 8) //Destination Scatter-Gather Transfer Half +#define DMA_IT_DSTSG_DONE (1 << 9) //Destination Scatter-Gather Transfer Done +#define DMA_IT_SRCSG_HALF (1 << 16) //Source Scatter-Gather Transfer Half +#define DMA_IT_SRCSG_DONE (1 << 17) //Source Scatter-Gather Transfer Done + + + +void DMA_CH_Init(uint32_t chn, DMA_InitStructure * initStruct); //DMA通道配置 +void DMA_CH_Open(uint32_t chn); +void DMA_CH_Close(uint32_t chn); + +void DMA_CH_SetCount(uint32_t chn, uint32_t count); +void DMA_CH_SetSrcAddress(uint32_t chn, uint32_t address); +void DMA_CH_SetDstAddress(uint32_t chn, uint32_t address); +uint32_t DMA_CH_GetRemaining(uint32_t chn); + +void DMA_CH_INTEn(uint32_t chn, uint32_t it); //DMA中断使能 +void DMA_CH_INTDis(uint32_t chn, uint32_t it); //DMA中断禁止 +void DMA_CH_INTClr(uint32_t chn, uint32_t it); //DMA中断标志清除 +uint32_t DMA_CH_INTStat(uint32_t chn, uint32_t it); //DMA中断状态查询 + + +#endif //__SWM341_DMA_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma2d.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma2d.c new file mode 100644 index 0000000000..3ec88b5128 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma2d.c @@ -0,0 +1,220 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_dma2d.c +* 功能说明: SWM341单片机的DMA2D功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_dma2d.h" + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_Init() +* 功能说明: DMA2D初始化 +* 输 入: DMA2D_InitStructure * initStruct +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_Init(DMA2D_InitStructure * initStruct) +{ + SYS->CLKEN0 |= (1 << SYS_CLKEN0_DMA2D_Pos); + + DMA2D->CR &= ~DMA2D_CR_WAIT_Msk; + DMA2D->CR |= (initStruct->Interval << DMA2D_CR_WAIT_Pos); + + DMA2D->IF = 0xFF; + DMA2D->IE = (initStruct->IntEOTEn << DMA2D_IE_DONE_Pos); + + if(initStruct->IntEOTEn) + NVIC_EnableIRQ(DMA2D_IRQn); +} + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_PixelFill() +* 功能说明: DMA2D向指定存储器区域填充指定颜色 +* 输 入: DMA2D_LayerSetting * outLayer 要填充的位置、大小、颜色格式等 +* uint32_t color 要填充的颜色 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_PixelFill(DMA2D_LayerSetting * outLayer, uint32_t color) +{ + DMA2D->L[DMA2D_LAYER_OUT].COLOR = color; + + DMA2D->L[DMA2D_LAYER_OUT].MAR = outLayer->Address; + DMA2D->L[DMA2D_LAYER_OUT].OR = outLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_OUT].PFCCR = (outLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos); + + DMA2D->NLR = ((outLayer->LineCount - 1) << DMA2D_NLR_NLINE_Pos) | + ((outLayer->LinePixel - 1) << DMA2D_NLR_NPIXEL_Pos); + + DMA2D->CR &= ~DMA2D_CR_MODE_Msk; + DMA2D->CR |= (3 << DMA2D_CR_MODE_Pos) | + (1 << DMA2D_CR_START_Pos); +} + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_PixelMove() +* 功能说明: DMA2D像素数据搬运 +* 输 入: DMA2D_LayerSetting * fgLayer +* DMA2D_LayerSetting * outLayer +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_PixelMove(DMA2D_LayerSetting * fgLayer, DMA2D_LayerSetting * outLayer) +{ + DMA2D->L[DMA2D_LAYER_FG].MAR = fgLayer->Address; + DMA2D->L[DMA2D_LAYER_FG].OR = fgLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_FG].PFCCR = (fgLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos); + + DMA2D->L[DMA2D_LAYER_OUT].MAR = outLayer->Address; + DMA2D->L[DMA2D_LAYER_OUT].OR = outLayer->LineOffset; + + DMA2D->NLR = ((outLayer->LineCount - 1) << DMA2D_NLR_NLINE_Pos) | + ((outLayer->LinePixel - 1) << DMA2D_NLR_NPIXEL_Pos); + + DMA2D->CR &= ~DMA2D_CR_MODE_Msk; + DMA2D->CR |= (0 << DMA2D_CR_MODE_Pos) | + (1 << DMA2D_CR_START_Pos); +} + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_PixelConvert() +* 功能说明: DMA2D像素转换 +* 输 入: DMA2D_LayerSetting * fgLayer +* DMA2D_LayerSetting * outLayer +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_PixelConvert(DMA2D_LayerSetting * fgLayer, DMA2D_LayerSetting * outLayer) +{ + DMA2D->L[DMA2D_LAYER_FG].MAR = fgLayer->Address; + DMA2D->L[DMA2D_LAYER_FG].OR = fgLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_FG].PFCCR = (fgLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos); + + DMA2D->L[DMA2D_LAYER_OUT].MAR = outLayer->Address; + DMA2D->L[DMA2D_LAYER_OUT].OR = outLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_OUT].PFCCR = (outLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos); + + DMA2D->NLR = ((outLayer->LineCount - 1) << DMA2D_NLR_NLINE_Pos) | + ((outLayer->LinePixel - 1) << DMA2D_NLR_NPIXEL_Pos); + + DMA2D->CR &= ~DMA2D_CR_MODE_Msk; + DMA2D->CR |= (1 << DMA2D_CR_MODE_Pos) | + (1 << DMA2D_CR_START_Pos); +} + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_PixelBlend() +* 功能说明: DMA2D像素混合 +* 输 入: DMA2D_LayerSetting * fgLayer +* DMA2D_LayerSetting * bgLayer +* DMA2D_LayerSetting * outLayer +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_PixelBlend(DMA2D_LayerSetting * fgLayer, DMA2D_LayerSetting * bgLayer, DMA2D_LayerSetting * outLayer) +{ + DMA2D->L[DMA2D_LAYER_FG].MAR = fgLayer->Address; + DMA2D->L[DMA2D_LAYER_FG].OR = fgLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_FG].PFCCR = (fgLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos) | + (fgLayer->AlphaMode << DMA2D_PFCCR_AINV_Pos) | + (fgLayer->Alpha << DMA2D_PFCCR_ALPHA_Pos); + + DMA2D->L[DMA2D_LAYER_BG].MAR = bgLayer->Address; + DMA2D->L[DMA2D_LAYER_BG].OR = bgLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_BG].PFCCR = (bgLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos) | + (bgLayer->AlphaMode << DMA2D_PFCCR_AINV_Pos) | + (bgLayer->Alpha << DMA2D_PFCCR_ALPHA_Pos); + + DMA2D->L[DMA2D_LAYER_OUT].MAR = outLayer->Address; + DMA2D->L[DMA2D_LAYER_OUT].OR = outLayer->LineOffset; + DMA2D->L[DMA2D_LAYER_OUT].PFCCR = (outLayer->ColorMode << DMA2D_PFCCR_CFMT_Pos); + + DMA2D->NLR = ((outLayer->LineCount - 1) << DMA2D_NLR_NLINE_Pos) | + ((outLayer->LinePixel - 1) << DMA2D_NLR_NPIXEL_Pos); + + DMA2D->CR &= ~DMA2D_CR_MODE_Msk; + DMA2D->CR |= (2 << DMA2D_CR_MODE_Pos) | + (1 << DMA2D_CR_START_Pos); +} + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_IsBusy() +* 功能说明: DMA2D忙查询 +* 输 入: 无 +* 输 出: uint32_t 1 正在传输 0 传输完成 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t DMA2D_IsBusy(void) +{ + return (DMA2D->CR & DMA2D_CR_START_Msk) ? 1 : 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_INTEn() +* 功能说明: DMA2D中断使能,完成指定长度的数据传输时触发中断 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_INTEn(void) +{ + DMA2D->IE = DMA2D_IE_DONE_Msk; +} + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_INTDis() +* 功能说明: DMA2D中断禁止,完成指定长度的数据传输时不触发中断 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_INTDis(void) +{ + DMA2D->IE = 0; +} + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_INTClr() +* 功能说明: DMA2D中断标志清除 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void DMA2D_INTClr(void) +{ + DMA2D->IF = DMA2D_IF_DONE_Msk; +} + +/****************************************************************************************************************************************** +* 函数名称: DMA2D_INTStat() +* 功能说明: DMA2D中断状态查询 +* 输 入: 无 +* 输 出: uint32_t 0 未完成指定长度的数据传输 1 完成指定长度的数据传输 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t DMA2D_INTStat(void) +{ + return (DMA2D->IF & DMA2D_IF_DONE_Msk) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma2d.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma2d.h new file mode 100644 index 0000000000..798a362527 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_dma2d.h @@ -0,0 +1,57 @@ +#ifndef __SWM341_DMA2D_H__ +#define __SWM341_DMA2D_H__ + +#include <stdint.h> + + +typedef struct { + uint16_t Interval; // 每传输一块数据(64个字),等待指定个系统周期后再传输下一个块,防止DMA2D占用过多SDRAM带宽,影响LCD读取显示数据;取值1--1023 + uint8_t IntEOTEn; // End of Transter(传输完成)中断使能 +} DMA2D_InitStructure; + + +typedef struct { + uint32_t Address; + uint32_t LineOffset; // added at the end of each line to determine the starting address of the next line + uint8_t ColorMode; // DMA2D_FMT_ARGB888、DMA2D_FMT_RGB888、DMA2D_FMT_RGB565、... + uint8_t AlphaMode; // DMA2D_AMODE_PIXEL、DMA2D_AMODE_ALPHA、DMA2D_AMODE_PMULA、... + uint8_t Alpha; + + /* 只有输出层需要设置这两个域,前景层和背景层不需设置 */ + uint16_t LineCount; // 显示数据行数 + uint16_t LinePixel; // 每行像素个数 +} DMA2D_LayerSetting; + + +#define DMA2D_LAYER_FG 0 // Foreground layer +#define DMA2D_LAYER_BG 1 // Background layer +#define DMA2D_LAYER_OUT 2 // Output layer + +/* Color Format */ +#define DMA2D_FMT_ARGB888 (0 | (0 << 4)) +#define DMA2D_FMT_RGB888 (1 | (0 << 4)) +#define DMA2D_FMT_RGB565 (2 | (0 << 4)) +#define DMA2D_FMT_ABGR888 (0 | (1 << 4)) +#define DMA2D_FMT_BGR888 (1 | (1 << 4)) +#define DMA2D_FMT_BGR565 (2 | (1 << 4)) + +/* Alpha Mode */ +#define DMA2D_AMODE_PIXEL (0 | (0 << 5)) // 使用像素点自带Alpha值 +#define DMA2D_AMODE_ALPHA (0 | (1 << 5)) // 使用软件指定的Alpha值 +#define DMA2D_AMODE_PMULA (0 | (2 << 5)) // 使用像素点自带Alpha值与软件指定的Alpha值的乘积 + + +void DMA2D_Init(DMA2D_InitStructure * initStruct); +void DMA2D_PixelFill(DMA2D_LayerSetting * outLayer, uint32_t color); +void DMA2D_PixelMove(DMA2D_LayerSetting * fgLayer, DMA2D_LayerSetting * outLayer); +void DMA2D_PixelConvert(DMA2D_LayerSetting * fgLayer, DMA2D_LayerSetting * outLayer); +void DMA2D_PixelBlend(DMA2D_LayerSetting * fgLayer, DMA2D_LayerSetting * bgLayer, DMA2D_LayerSetting * outLayer); +uint32_t DMA2D_IsBusy(void); + +void DMA2D_INTEn(void); +void DMA2D_INTDis(void); +void DMA2D_INTClr(void); +uint32_t DMA2D_INTStat(void); + + +#endif // __SWM341_DMA2D_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_exti.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_exti.c new file mode 100644 index 0000000000..ccf9c22352 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_exti.c @@ -0,0 +1,130 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_exti.c +* 功能说明: SWM341单片机的外部中断功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_exti.h" + +/****************************************************************************************************************************************** +* 函数名称: EXTI_Init() +* 功能说明: 指定引脚外部中断初始化 +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定产生外部中断的GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t mode 有效值有EXTI_FALL_EDGE、EXTI_RISE_EDGE、EXTI_BOTH_EDGE、EXTI_LOW_LEVEL、EXTI_HIGH_LEVEL +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void EXTI_Init(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t mode) +{ + EXTI_Close(GPIOx, n); //配置关键寄存器前先关闭 + + if(mode & 0x10) + { + GPIOx->INTLVLTRG |= (0x01 << n); //电平触发 + + if(mode & 0x01) + GPIOx->INTRISEEN |= (0x01 << n); //高电平触发 + else + GPIOx->INTRISEEN &= ~(0x01 << n); //低电平触发 + } + else + { + GPIOx->INTLVLTRG &= ~(0x01 << n); //边沿触发 + + if(mode & 0x02) + { + GPIOx->INTBE |= (0x01 << n); //双边沿触发 + } + else + { + GPIOx->INTBE &= ~(0x01 << n); //单边沿触发 + + if(mode & 0x01) + GPIOx->INTRISEEN |= (0x01 << n); //上升沿触发 + else + GPIOx->INTRISEEN &= ~(0x01 << n); //下降沿触发 + } + } + + GPIOx->INTCLR = (1 << n); //清除掉因为模式配置可能产生的中断 +} + +/****************************************************************************************************************************************** +* 函数名称: EXTI_Open() +* 功能说明: 指定引脚外部中断打开(即使能) +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定产生外部中断的GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void EXTI_Open(GPIO_TypeDef * GPIOx, uint32_t n) +{ + GPIOx->INTEN |= (0x01 << n); +} + +/****************************************************************************************************************************************** +* 函数名称: EXTI_Close() +* 功能说明: 指定引脚外部中断关闭(即禁能) +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定产生外部中断的GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void EXTI_Close(GPIO_TypeDef * GPIOx, uint32_t n) +{ + GPIOx->INTEN &= ~(0x01 << n); +} + +/****************************************************************************************************************************************** +* 函数名称: EXTI_State() +* 功能说明: 指定引脚是否触发了中断 +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定产生外部中断的GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: uint32_t 1 此引脚触发了中断 0 此引脚未触发中断 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t EXTI_State(GPIO_TypeDef * GPIOx, uint32_t n) +{ + return (GPIOx->INTSTAT >> n) & 0x01; +} + +/****************************************************************************************************************************************** +* 函数名称: EXTI_RawState() +* 功能说明: 指定引脚是否满足过/了中断触发条件,当此中断关闭时可通过调用此函数以查询的方式检测引脚上是否满足过/了中断触发条件 +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定产生外部中断的GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: uint32_t 1 此引脚满足过/了中断触发条件 0 此引脚未满足过/了中断触发条件 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t EXTI_RawState(GPIO_TypeDef * GPIOx, uint32_t n) +{ + return (GPIOx->INTRAWSTAT >> n) & 0x01; +} + +/****************************************************************************************************************************************** +* 函数名称: EXTI_Clear() +* 功能说明: 指定引脚外部中断清除(即清除中断标志,以免再次进入此中断) +* 输 入: GPIO_TypeDef * GPIOx 指定产生外部中断的GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定产生外部中断的GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 无 +* 注意事项: 只能清除边沿触发中断的标志,电平触发中断的标志无法清除,只能在引脚电平不符合中断触发条件后硬件自动清除 +******************************************************************************************************************************************/ +void EXTI_Clear(GPIO_TypeDef * GPIOx, uint32_t n) +{ + GPIOx->INTCLR = (0x01 << n); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_exti.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_exti.h new file mode 100644 index 0000000000..dc1e725574 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_exti.h @@ -0,0 +1,20 @@ +#ifndef __SWM341_EXTI_H__ +#define __SWM341_EXTI_H__ + +void EXTI_Init(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t mode); //指定引脚外部中断初始化 +void EXTI_Open(GPIO_TypeDef * GPIOx, uint32_t n); //指定引脚外部中断打开(即使能) +void EXTI_Close(GPIO_TypeDef * GPIOx, uint32_t n); //指定引脚外部中断关闭(即禁能) + +uint32_t EXTI_State(GPIO_TypeDef * GPIOx, uint32_t n); //指定引脚是否触发了中断 +uint32_t EXTI_RawState(GPIO_TypeDef * GPIOx, uint32_t n); //指定引脚是否满足过/了中断触发条件,当此中断关闭时可通过调用此函数以查询的方式检测引脚上是否满足过/了中断触发条件 +void EXTI_Clear(GPIO_TypeDef * GPIOx, uint32_t n); //指定引脚外部中断清除(即清除中断标志,以免再次进入此中断) + + +#define EXTI_FALL_EDGE 0x00 //下降沿触发中断 +#define EXTI_RISE_EDGE 0x01 //上升沿触发中断 +#define EXTI_BOTH_EDGE 0x02 //双边沿触发中断 +#define EXTI_LOW_LEVEL 0x10 //低电平触发中断 +#define EXTI_HIGH_LEVEL 0x11 //高电平触发中断 + + +#endif //__SWM341_EXTI_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_flash.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_flash.c new file mode 100644 index 0000000000..a41cbc520e --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_flash.c @@ -0,0 +1,112 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_flash.c +* 功能说明: 使用芯片的IAP功能将片上Flash模拟成EEPROM来保存数据,掉电后不丢失 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_flash.h" + + +const IAP_Cache_Reset_t IAP_Cache_Reset = (IAP_Cache_Reset_t)0x11000401; +const IAP_Flash_Param_t IAP_Flash_Param = (IAP_Flash_Param_t)0x11000431; +const IAP_Flash_Erase_t IAP_Flash_Erase = (IAP_Flash_Erase_t)0x11000471; +const IAP_Flash_Write_t IAP_Flash_Write = (IAP_Flash_Write_t)0x110004C1; + + +/****************************************************************************************************************************************** +* 函数名称: FLASH_Erase() +* 功能说明: FLASH扇区擦除,每个扇区4K字节 +* 输 入: uint32_t addr 要擦除扇区的地址,必须4K对齐,即addr%4096 == 0 +* 输 出: uint32_t FLASH_RES_OK、FLASH_RES_TO、FLASH_RES_ERR +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t FLASH_Erase(uint32_t addr) +{ + if(addr % 4096 != 0) return FLASH_RES_ERR; + + __disable_irq(); + + IAP_Flash_Erase(addr/4096, 0x0B11FFAC); + + IAP_Cache_Reset((FMC->CACHE | FMC_CACHE_CCLR_Msk), 0x0B11FFAC); // Cache Clear + + __enable_irq(); + + return FLASH_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: FLASH_Write() +* 功能说明: FLASH数据写入 +* 输 入: uint32_t addr 数据要写入到Flash中的地址,四字对齐 +* uint32_t buff[] 要写入Flash中的数据 +* uint32_t count 要写入数据的个数,以字为单位,且必须是4的整数倍,即最少写入4个字 +* 输 出: uint32_t FLASH_RES_OK、FLASH_RES_TO、FLASH_RES_ERR +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t FLASH_Write(uint32_t addr, uint32_t buff[], uint32_t count) +{ + if(addr % 16 != 0) return FLASH_RES_ERR; + if(count % 4 != 0) return FLASH_RES_ERR; + + __disable_irq(); + + IAP_Flash_Write(addr, (uint32_t)buff, count/4, 0x0B11FFAC); + + IAP_Cache_Reset((FMC->CACHE | FMC_CACHE_CCLR_Msk), 0x0B11FFAC); // Cache Clear + + __enable_irq(); + + return FLASH_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: Flash_Param_at_xMHz() +* 功能说明: 将Flash参数设置成xMHz主频下运行时所需的参数 +* 输 入: uint32_t x 取值30、40、80、120、150 +* 输 出: 无 +* 注意事项: 系统主频越高,Flash访问等待周期越长 +******************************************************************************************************************************************/ +void Flash_Param_at_xMHz(uint32_t x) +{ +// __disable_irq(); + switch(x) + { + case 30: + IAP_Flash_Param(0x8949, 0x0FA1, 0x0B11FFAC); + break; + + case 40: + IAP_Flash_Param(0x8A49, 0x14A9, 0x0B11FFAC); + break; + + case 80: + IAP_Flash_Param(0xD349, 0x294A, 0x0B11FFAC); + break; + + case 120: + IAP_Flash_Param(0x11C89, 0x3D6B, 0x0B11FFAC); + break; + + case 150: + default: + IAP_Flash_Param(0x16589, 0x4C74, 0x0B11FFAC); + break; + } +// __enable_irq(); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_flash.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_flash.h new file mode 100644 index 0000000000..0ab4fb2116 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_flash.h @@ -0,0 +1,27 @@ +#ifndef __SWM341_FLASH_H__ +#define __SWM341_FLASH_H__ + + +uint32_t FLASH_Erase(uint32_t addr); +uint32_t FLASH_Write(uint32_t addr, uint32_t buff[], uint32_t count); + +void Flash_Param_at_xMHz(uint32_t x); + +#define FLASH_RES_OK 0 +#define FLASH_RES_TO 1 //Timeout +#define FLASH_RES_ERR 2 + + + +typedef void (*IAP_Cache_Reset_t)(uint32_t cfg, uint32_t flag); +typedef int (*IAP_Flash_Param_t)(uint32_t cfg0, uint32_t cfg1, uint32_t flag); +typedef int (*IAP_Flash_Erase_t)(uint32_t sector, uint32_t flag); +typedef int (*IAP_Flash_Write_t)(uint32_t flash_addr, uint32_t ram_addr, uint32_t count, uint32_t flag); + +extern const IAP_Cache_Reset_t IAP_Cache_Reset; +extern const IAP_Flash_Param_t IAP_Flash_Param; +extern const IAP_Flash_Erase_t IAP_Flash_Erase; +extern const IAP_Flash_Write_t IAP_Flash_Write; + + +#endif //__SWM341_FLASH_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_gpio.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_gpio.c new file mode 100644 index 0000000000..368a2611bf --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_gpio.c @@ -0,0 +1,287 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_gpio.c +* 功能说明: SWM341单片机的通用输入输出功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_gpio.h" + + +/****************************************************************************************************************************************** +* 函数名称: GPIO_Init() +* 功能说明: 引脚初始化,包含引脚方向、上拉、下拉、开漏 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t dir 引脚方向,0 输入 1 输出 +* uint32_t pull_up 上拉使能 +* uint32_t pull_down 下拉使能 +* uint32_t open_drain 开漏使能 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_Init(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t dir, uint32_t pull_up, uint32_t pull_down, uint32_t open_drain) +{ + PORT_TypeDef * PORTx = PORTA; + + switch((uint32_t)GPIOx) + { + case ((uint32_t)GPIOA): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_GPIOA_Pos); + + PORTx = PORTA; + break; + + case ((uint32_t)GPIOB): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_GPIOB_Pos); + + PORTx = PORTB; + break; + + case ((uint32_t)GPIOC): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_GPIOC_Pos); + + PORTx = PORTC; + break; + + case ((uint32_t)GPIOD): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_GPIOD_Pos); + + PORTx = PORTD; + break; + + case ((uint32_t)GPIOE): + SYS->CLKEN1 |= (0x01 << SYS_CLKEN1_GPIOE_Pos); + + PORTx = PORTE; + break; + + case ((uint32_t)GPIOM): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_GPIOM_Pos); + + PORTx = PORTM; + break; + + case ((uint32_t)GPION): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_GPION_Pos); + + PORTx = PORTN; + break; + } + + PORT_Init(PORTx, n, 0, 1); //PORTx.PINn引脚配置为GPIO功能,数字输入开启 + if(dir == 1) + { + GPIOx->DIR |= (0x01 << n); + } + else + { + GPIOx->DIR &= ~(0x01 << n); + } + + if(pull_up == 1) PORTx->PULLU |= (1 << n); + else PORTx->PULLU &= ~(1 << n); + if(pull_down == 1) PORTx->PULLD |= (1 << n); + else PORTx->PULLD &= ~(1 << n); + if(open_drain == 1) PORTx->OPEND |= (1 << n); + else PORTx->OPEND &= ~(1 << n); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_SetBit() +* 功能说明: 将参数指定的引脚电平置高 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_SetBit(GPIO_TypeDef * GPIOx, uint32_t n) +{ + *(&GPIOx->DATAPIN0 + n) = 1; +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_ClrBit() +* 功能说明: 将参数指定的引脚电平置低 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_ClrBit(GPIO_TypeDef * GPIOx, uint32_t n) +{ + *(&GPIOx->DATAPIN0 + n) = 0; +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_InvBit() +* 功能说明: 将参数指定的引脚电平反转 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_InvBit(GPIO_TypeDef * GPIOx, uint32_t n) +{ + *(&GPIOx->DATAPIN0 + n) = 1 - *(&GPIOx->DATAPIN0 + n); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_GetBit() +* 功能说明: 读取参数指定的引脚的电平状态 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* 输 出: 参数指定的引脚的电平状态 0 低电平 1 高电平 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t GPIO_GetBit(GPIO_TypeDef * GPIOx, uint32_t n) +{ + return *(&GPIOx->DATAPIN0 + n); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_SetBits() +* 功能说明: 将参数指定的从n开始的w位连续引脚的电平置高 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置高的引脚的个数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_SetBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + GPIOx->ODR |= (bits << n); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_ClrBits() +* 功能说明: 将参数指定的从n开始的w位连续引脚的电平置低 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置低的引脚的个数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_ClrBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + GPIOx->ODR &= ~(bits << n); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_InvBits() +* 功能说明: 将参数指定的从n开始的w位连续引脚的电平反转 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平反转的引脚的个数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void GPIO_InvBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + GPIOx->ODR ^= (bits << n); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_GetBits() +* 功能说明: 读取参数指定的从n开始的w位连续引脚的电平状态 +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置高的引脚的个数 +* 输 出: 参数指定的从n开始的w位连续引脚的电平状态 0 低电平 1 高电平 +* 返回值的第0位表示引脚n的电平状态、返回值的第1位表示引脚n+1的电平状态... ...返回值的第w位表示引脚n+w的电平状态 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t GPIO_GetBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + return ((GPIOx->IDR >> n) & bits); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_AtomicSetBits() +* 功能说明: 将参数指定的从n开始的w位连续引脚的电平置高,确保引脚”读-改-写“操作的原子性(不被中断ISR打断) +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置高的引脚的个数 +* 输 出: 无 +* 注意事项: 当GPIOx的16个引脚中,有些在主循环中操作,有些在中断ISR中操作时,GPIOx的引脚必须都用GPIO_Atomic类型函数操作 +******************************************************************************************************************************************/ +void GPIO_AtomicSetBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + __disable_irq(); + GPIOx->ODR |= (bits << n); + __enable_irq(); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_AtomicClrBits() +* 功能说明: 将参数指定的从n开始的w位连续引脚的电平置低,确保引脚”读-改-写“操作的原子性(不被中断ISR打断) +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平置低的引脚的个数 +* 输 出: 无 +* 注意事项: 当GPIOx的16个引脚中,有些在主循环中操作,有些在中断ISR中操作时,GPIOx的引脚必须都用GPIO_Atomic类型函数操作 +******************************************************************************************************************************************/ +void GPIO_AtomicClrBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + __disable_irq(); + GPIOx->ODR &= ~(bits << n); + __enable_irq(); +} + +/****************************************************************************************************************************************** +* 函数名称: GPIO_AtomicInvBits() +* 功能说明: 将参数指定的从n开始的w位连续引脚的电平反转,确保引脚”读-改-写“操作的原子性(不被中断ISR打断) +* 输 入: GPIO_TypeDef * GPIOx 指定GPIO端口,有效值包括GPIOA、GPIOB、GPIOC、GPIOD、GPIOE、GPIOM、GPION +* uint32_t n 指定GPIO引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t w 指定要将引脚电平反转的引脚的个数 +* 输 出: 无 +* 注意事项: 当GPIOx的16个引脚中,有些在主循环中操作,有些在中断ISR中操作时,GPIOx的引脚必须都用GPIO_Atomic类型函数操作 +******************************************************************************************************************************************/ +void GPIO_AtomicInvBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w) +{ + uint32_t bits; + + bits = 0xFFFF >> (16 - w); + + __disable_irq(); + GPIOx->ODR ^= (bits << n); + __enable_irq(); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_gpio.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_gpio.h new file mode 100644 index 0000000000..705d4d1ca3 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_gpio.h @@ -0,0 +1,38 @@ +#ifndef __SWM341_GPIO_H__ +#define __SWM341_GPIO_H__ + + +void GPIO_Init(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t dir, uint32_t pull_up, uint32_t pull_down, uint32_t open_drain); //引脚初始化,包含引脚方向、上拉、下拉、开漏 + +#define GPIO_INPUT ((0 << 0) | (0 << 1) | (0 << 2) | (0 << 3)) +#define GPIO_INPUT_PullUp ((0 << 0) | (1 << 1) | (0 << 2) | (0 << 3)) +#define GPIO_INPUT_PullDown ((0 << 0) | (0 << 1) | (1 << 2) | (0 << 3)) +#define GPIO_OUTPUT ((1 << 0) | (0 << 1) | (0 << 2) | (0 << 3)) +#define GPIO_OUTPUT_OpenDrain ((1 << 0) | (0 << 1) | (0 << 2) | (1 << 3)) +#define GPIO_OUTPUT_OpenDrain_PullUp ((1 << 0) | (1 << 1) | (0 << 2) | (1 << 3)) + +#define GPIO_INIT(GPIOx, n, mode) GPIO_Init(GPIOx, n, (mode & 1) ? 1 : 0, (mode & 2) ? 1 : 0, (mode & 4) ? 1 : 0, (mode & 8) ? 1 : 0) + + +void GPIO_SetBit(GPIO_TypeDef * GPIOx, uint32_t n); //将参数指定的引脚电平置高 +void GPIO_ClrBit(GPIO_TypeDef * GPIOx, uint32_t n); //将参数指定的引脚电平置低 +void GPIO_InvBit(GPIO_TypeDef * GPIOx, uint32_t n); //将参数指定的引脚电平反转 +uint32_t GPIO_GetBit(GPIO_TypeDef * GPIOx, uint32_t n); //读取参数指定的引脚的电平状态 +void GPIO_SetBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); //将参数指定的从n开始的w位连续引脚的电平置高 +void GPIO_ClrBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); //将参数指定的从n开始的w位连续引脚的电平置低 +void GPIO_InvBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); //将参数指定的从n开始的w位连续引脚的电平反转 +uint32_t GPIO_GetBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); //读取参数指定的从n开始的w位连续引脚的电平状态 + + +void GPIO_AtomicSetBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); +void GPIO_AtomicClrBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); +void GPIO_AtomicInvBits(GPIO_TypeDef * GPIOx, uint32_t n, uint32_t w); + + +// for compatibility +#define GPIO_AtomicSetBit GPIO_SetBit +#define GPIO_AtomicClrBit GPIO_ClrBit +#define GPIO_AtomicInvBit GPIO_InvBit + + +#endif //__SWM341_GPIO_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_i2c.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_i2c.c new file mode 100644 index 0000000000..2b3cd2fecc --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_i2c.c @@ -0,0 +1,321 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_i2c.c +* 功能说明: SWM341单片机的I2C串行接口功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIES AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIEE. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIES ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_i2c.h" + + +/****************************************************************************************************************************************** +* 函数名称: I2C_Init() +* 功能说明: I2C初始化 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* I2C_InitStructure * initStruct 包含I2C相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2C_Init(I2C_TypeDef * I2Cx, I2C_InitStructure * initStruct) +{ + switch((uint32_t)I2Cx) + { + case ((uint32_t)I2C0): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_I2C0_Pos); + break; + + case((uint32_t)I2C1): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_I2C1_Pos); + break; + } + + I2C_Close(I2Cx); //一些关键寄存器只能在I2C关闭时设置 + + if(initStruct->Master == 1) + { + I2Cx->CR |= (1 << I2C_CR_MASTER_Pos); + + I2Cx->CLK = (((SystemCoreClock/2)/1000000/3*2 - 1) << I2C_CLK_SCLL_Pos) | + (((SystemCoreClock/2)/1000000/3*1 - 1) << I2C_CLK_SCLH_Pos) | + ((1000000 / initStruct->MstClk - 1) << I2C_CLK_DIV_Pos); + + I2Cx->IF = 0xFFFFFFFF; + I2Cx->IE = (initStruct->TXEmptyIEn << I2C_IE_TXE_Pos) | + (initStruct->RXNotEmptyIEn << I2C_IE_RXNE_Pos); + + switch((uint32_t)I2Cx) + { + case ((uint32_t)I2C0): + if(initStruct->TXEmptyIEn | initStruct->RXNotEmptyIEn) + { + NVIC_EnableIRQ(I2C0_IRQn); + } + else + { + NVIC_DisableIRQ(I2C0_IRQn); + } + break; + + case ((uint32_t)I2C1): + if(initStruct->TXEmptyIEn | initStruct->RXNotEmptyIEn) + { + NVIC_EnableIRQ(I2C1_IRQn); + } + else + { + NVIC_DisableIRQ(I2C1_IRQn); + } + break; + } + } + else + { + I2Cx->CR &= ~(1 << I2C_CR_MASTER_Pos); + + I2Cx->SCR &= ~I2C_SCR_ADDR10_Msk; + I2Cx->SCR |= (initStruct->Addr10b << I2C_SCR_ADDR10_Pos); + + if(initStruct->Addr10b) + I2Cx->SADDR = (initStruct->SlvAddr << I2C_SADDR_ADDR10_Pos) | + (initStruct->SlvAddrMsk << I2C_SADDR_MASK10_Pos); + else + I2Cx->SADDR = (initStruct->SlvAddr << I2C_SADDR_ADDR7_Pos) | + (initStruct->SlvAddrMsk << I2C_SADDR_MASK7_Pos); + + I2Cx->IF = 0xFFFFFFFF; + I2Cx->IE = (initStruct->TXEmptyIEn << I2C_IE_TXE_Pos) | + (initStruct->RXNotEmptyIEn << I2C_IE_RXNE_Pos) | + (initStruct->SlvSTADetIEn << I2C_IE_RXSTA_Pos) | + (initStruct->SlvSTODetIEn << I2C_IE_RXSTO_Pos); + + switch((uint32_t)I2Cx) + { + case ((uint32_t)I2C0): + if(initStruct->SlvSTADetIEn | initStruct->SlvSTODetIEn | initStruct->TXEmptyIEn | initStruct->RXNotEmptyIEn) + { + NVIC_EnableIRQ(I2C0_IRQn); + } + else + { + NVIC_DisableIRQ(I2C0_IRQn); + } + break; + + case ((uint32_t)I2C1): + if(initStruct->SlvSTADetIEn | initStruct->SlvSTODetIEn | initStruct->TXEmptyIEn | initStruct->RXNotEmptyIEn) + { + NVIC_EnableIRQ(I2C1_IRQn); + } + else + { + NVIC_DisableIRQ(I2C1_IRQn); + } + break; + } + } +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_Open() +* 功能说明: I2C打开,允许收发 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2C_Open(I2C_TypeDef * I2Cx) +{ + I2Cx->CR |= (0x01 << I2C_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_Close() +* 功能说明: I2C关闭,禁止收发 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2C_Close(I2C_TypeDef * I2Cx) +{ + I2Cx->CR &= ~(0x01 << I2C_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_Start() +* 功能说明: 产生起始信号并发送设备地址 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint8_t addr 设备地址 +* uint8_t wait 是否等待发送完成,1 等待发送完成 0 不等待,立即返回 +* 输 出: uint8_t 1 接收到ACK 0 接收到NACK +* 注意事项: 若选择不等待,立即返回,则返回值无意义;后续可通过 I2C_StartDone() 查询是否完成,完成后调用 I2C_IsAck() 查询接收到ACK还是NACK +******************************************************************************************************************************************/ +uint8_t I2C_Start(I2C_TypeDef * I2Cx, uint8_t addr, uint8_t wait) +{ + I2Cx->TXDATA = addr; + I2Cx->MCR = (1 << I2C_MCR_STA_Pos) | + (1 << I2C_MCR_WR_Pos); //发送起始位和从机地址 + + if(wait == 0) + return 0; + + while(I2Cx->MCR & I2C_MCR_WR_Msk) __NOP(); //等待发送完成 + + return (I2Cx->TR & I2C_TR_RXACK_Msk) ? 0 : 1; +} + +uint8_t I2C_StartDone(I2C_TypeDef * I2Cx) +{ + return (I2Cx->MCR & I2C_MCR_WR_Msk) ? 0 : 1; +} + +uint8_t I2C_IsAck(I2C_TypeDef * I2Cx) +{ + return (I2Cx->TR & I2C_TR_RXACK_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_Stop() +* 功能说明: 产生停止信号 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint8_t wait 是否等待发送完成,1 等待发送完成 0 不等待,立即返回 +* 输 出: 无 +* 注意事项: 若选择不等待,立即返回;后续可通过 I2C_StopDone() 查询是否完成 +******************************************************************************************************************************************/ +void I2C_Stop(I2C_TypeDef * I2Cx, uint8_t wait) +{ + I2Cx->MCR = (1 << I2C_MCR_STO_Pos); + + if(wait == 0) + return; + + while(I2Cx->MCR & I2C_MCR_STO_Msk) __NOP(); //等待发送完成 +} + +uint8_t I2C_StopDone(I2C_TypeDef * I2Cx) +{ + return (I2Cx->MCR & I2C_MCR_STO_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_Write() +* 功能说明: 写入一个数据 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint8_t data 要写的数据 +* uint8_t wait 是否等待发送完成,1 等待发送完成 0 不等待,立即返回 +* 输 出: uint8_t 1 接收到ACK 0 接收到NACK +* 注意事项: 若选择不等待,立即返回,则返回值无意义;后续可通过 I2C_WriteDone() 查询是否完成,完成后调用 I2C_IsAck() 查询接收到ACK还是NACK +******************************************************************************************************************************************/ +uint8_t I2C_Write(I2C_TypeDef * I2Cx, uint8_t data, uint8_t wait) +{ + I2Cx->TXDATA = data; + I2Cx->MCR = (1 << I2C_MCR_WR_Pos); + + if(wait == 0) + return 0; + + while(I2Cx->MCR & I2C_MCR_WR_Msk) __NOP(); //等待发送完成 + + return (I2Cx->TR & I2C_TR_RXACK_Msk) ? 0 : 1; +} + +uint8_t I2C_WriteDone(I2C_TypeDef * I2Cx) +{ + return (I2Cx->MCR & I2C_MCR_WR_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_Read() +* 功能说明: 读取一个数据 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint8_t ack 1 发送ACK 0 发送NACK +* uint8_t wait 是否等待发送完成,1 等待发送完成 0 不等待,立即返回 +* 输 出: uint8_t 读取到的数据 +* 注意事项: 若选择不等待,立即返回,则返回值无意义;后续可通过 I2C_ReadDone() 查询是否完成,完成后通过 I2Cx->RXDATA 获取读取到的数据 +******************************************************************************************************************************************/ +uint8_t I2C_Read(I2C_TypeDef * I2Cx, uint8_t ack, uint8_t wait) +{ + I2Cx->TR = ((ack ? 0 : 1) << I2C_TR_TXACK_Pos); + + I2Cx->MCR = (1 << I2C_MCR_RD_Pos); + + if(wait == 0) + return 0; + + while(I2Cx->MCR & I2C_MCR_RD_Msk) __NOP(); //等待接收完成 + + return I2Cx->RXDATA; +} + +uint8_t I2C_ReadDone(I2C_TypeDef * I2Cx) +{ + return (I2Cx->MCR & I2C_MCR_RD_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_INTEn() +* 功能说明: 中断使能 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint32_t it interrupt type,有效值I2C_IT_TX_EMPTY、I2C_IT_RX_NOT_EMPTY、I2C_IT_RX_OVF、I2C_IT_TX_DONE、I2C_IT_RX_DONE、 +* I2C_IT_SLV_DET_STA、I2C_IT_SLV_DET_STP、I2C_IT_ARB_LOST、I2C_IT_SCL_LOW_TO 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2C_INTEn(I2C_TypeDef * I2Cx, uint32_t it) +{ + I2Cx->IE |= it; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_INTDis() +* 功能说明: 中断禁止 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint32_t it interrupt type,有效值I2C_IT_TX_EMPTY、I2C_IT_RX_NOT_EMPTY、I2C_IT_RX_OVF、I2C_IT_TX_DONE、I2C_IT_RX_DONE、 +* I2C_IT_SLV_DET_STA、I2C_IT_SLV_DET_STP、I2C_IT_ARB_LOST、I2C_IT_SCL_LOW_TO 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2C_INTDis(I2C_TypeDef * I2Cx, uint32_t it) +{ + I2Cx->IE &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_INTClr() +* 功能说明: 中断标志清除 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint32_t it interrupt type,有效值I2C_IT_TX_EMPTY、I2C_IT_RX_NOT_EMPTY、I2C_IT_RX_OVF、I2C_IT_TX_DONE、I2C_IT_RX_DONE、 +* I2C_IT_SLV_DET_STA、I2C_IT_SLV_DET_STP、I2C_IT_ARB_LOST、I2C_IT_SCL_LOW_TO 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2C_INTClr(I2C_TypeDef * I2Cx, uint32_t it) +{ + I2Cx->IF = it; +} + +/****************************************************************************************************************************************** +* 函数名称: I2C_INTStat() +* 功能说明: 中断状态查询 +* 输 入: I2C_TypeDef * I2Cx 指定要被设置的I2C,有效值包括I2C0、I2C1 +* uint32_t it interrupt type,有效值I2C_IT_TX_EMPTY、I2C_IT_RX_NOT_EMPTY、I2C_IT_RX_OVF、I2C_IT_TX_DONE、I2C_IT_RX_DONE、 +* I2C_IT_SLV_DET_STA、I2C_IT_SLV_DET_STP、I2C_IT_ARB_LOST、I2C_IT_SCL_LOW_TO 及其“或” +* 输 出: uint32_t 1 中断发生 0 中断未发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t I2C_INTStat(I2C_TypeDef * I2Cx, uint32_t it) +{ + return (I2Cx->IF & it) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_i2c.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_i2c.h new file mode 100644 index 0000000000..e95ddc1d53 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_i2c.h @@ -0,0 +1,53 @@ +#ifndef __SWM341_I2C_H__ +#define __SWM341_I2C_H__ + + +typedef struct { + uint8_t Master; //1 主机模式 0 从机模式 + uint32_t MstClk; //主机传输时钟频率 + + uint8_t Addr10b; //1 10位地址模式 0 7位地址模式 + uint16_t SlvAddr; //从机地址 + uint16_t SlvAddrMsk; + + uint8_t TXEmptyIEn; //发送寄存器空中断使能 + uint8_t RXNotEmptyIEn; //接收寄存器非空中断使能 + uint8_t SlvSTADetIEn; //从机检测到起始中断使能 + uint8_t SlvSTODetIEn; //从机检测到终止中断使能 +} I2C_InitStructure; + + +/* Interrupt Type */ +#define I2C_IT_TX_EMPTY (1 << 0) //TX FIFO Empty +#define I2C_IT_RX_NOT_EMPTY (1 << 1) //RX FIFO Not Empty +#define I2C_IT_RX_OVF (1 << 2) //RX FIFO Overflow +#define I2C_IT_TX_DONE (1 << 3) //发送完成(接收到ACK) +#define I2C_IT_RX_DONE (1 << 4) //接收完成(发送出ACK) +#define I2C_IT_SLV_DET_STA (1 << 8) //从机检测到起始位 +#define I2C_IT_SLV_DET_STP (1 << 9) //从机检测到停止位 +#define I2C_IT_ARB_LOST (1 << 16) //主机Arbitration lost +#define I2C_IT_SCL_LOW_TO (1 << 17) //主机SCL Low Timeout + + +void I2C_Init(I2C_TypeDef * I2Cx, I2C_InitStructure * initStruct); + +void I2C_Open(I2C_TypeDef * I2Cx); +void I2C_Close(I2C_TypeDef * I2Cx); + +uint8_t I2C_Start(I2C_TypeDef * I2Cx, uint8_t addr, uint8_t wait); +void I2C_Stop(I2C_TypeDef * I2Cx, uint8_t wait); +uint8_t I2C_Write(I2C_TypeDef * I2Cx, uint8_t data, uint8_t wait); +uint8_t I2C_Read(I2C_TypeDef * I2Cx, uint8_t ack, uint8_t wait); + +uint8_t I2C_StartDone(I2C_TypeDef * I2Cx); +uint8_t I2C_StopDone(I2C_TypeDef * I2Cx); +uint8_t I2C_WriteDone(I2C_TypeDef * I2Cx); +uint8_t I2C_ReadDone(I2C_TypeDef * I2Cx); +uint8_t I2C_IsAck(I2C_TypeDef * I2Cx); + +void I2C_INTEn(I2C_TypeDef * I2Cx, uint32_t it); //中断使能 +void I2C_INTDis(I2C_TypeDef * I2Cx, uint32_t it); //中断禁止 +void I2C_INTClr(I2C_TypeDef * I2Cx, uint32_t it); //中断标志清除 +uint32_t I2C_INTStat(I2C_TypeDef * I2Cx, uint32_t it); //中断状态查询 + +#endif //__SWM341_I2C_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_iofilt.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_iofilt.c new file mode 100644 index 0000000000..a272ac68a4 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_iofilt.c @@ -0,0 +1,73 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_iofilt.c +* 功能说明: SWM341单片机的IO滤波器功能模块,对PAD到模块输入间的信号滤波,窄于指定宽度的脉冲视作毛刺,忽略 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_iofilt.h" + + +static uint32_t Width[2]; + + +/****************************************************************************************************************************************** +* 函数名称: IOFILT_Init() +* 功能说明: IO滤波器初始化 +* 输 入: uint32_t IOFILTn 要初始化的滤波器,可取值 0-1 +* uint32_t signal 要对哪个信号进行滤波操作,可取值 IOFILT0_PB5、IOFILT0_PB4、... +* uint32_t width 被选信号上宽度小于 width 个 HRC 时钟周期的脉冲被视作毛刺,过滤掉,可取值 IOFILT_WIDTH_2、IOFILT_WIDTH_4、... +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void IOFILT_Init(uint32_t IOFILTn, uint32_t signal, uint32_t width) +{ + SYS->CLKSEL &= ~SYS_CLKSEL_IOFILT_Msk; + SYS->CLKSEL |= (0 << SYS_CLKSEL_IOFILT_Pos); //滤波器时钟源:HRC + + SYS->CLKEN1 |= (1 << SYS_CLKEN1_IOFILT_Pos); + + *(&SYS->IOFILT0 + IOFILTn) = (signal << SYS_IOFILT_IOSEL_Pos) | + (0 << SYS_IOFILT_CLKDIV_Pos) | + (width << SYS_IOFILT_TIM_Pos); + + Width[IOFILTn] = width; +} + +/****************************************************************************************************************************************** +* 函数名称: IOFILT_Open() +* 功能说明: IO滤波器开启 +* 输 入: uint32_t IOFILTn 要初始化的滤波器,可取值 0-1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void IOFILT_Open(uint32_t IOFILTn) +{ + *(&SYS->IOFILT0 + IOFILTn) |= (Width[IOFILTn] << SYS_IOFILT_TIM_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: IOFILT_Close() +* 功能说明: IO滤波器关闭,即不滤波,PAD上的信号直接进入模块 +* 输 入: uint32_t IOFILTn 要初始化的滤波器,可取值 0-1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void IOFILT_Close(uint32_t IOFILTn) +{ + *(&SYS->IOFILT0 + IOFILTn) &= ~SYS_IOFILT_TIM_Msk; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_iofilt.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_iofilt.h new file mode 100644 index 0000000000..dd08b26b68 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_iofilt.h @@ -0,0 +1,40 @@ +#ifndef __SWM341_IOFILT_H__ +#define __SWM341_IOFILT_H__ + + +/* 选择对哪个信号进行滤波 */ +#define IOFILT0_PB5 0 +#define IOFILT0_PB4 1 +#define IOFILT0_PB3 2 +#define IOFILT0_PB2 3 + +#define IOFILT1_PC2 0 +#define IOFILT1_PC1 1 +#define IOFILT1_PC0 2 +#define IOFILT1_PA15 3 + + +#define IOFILT_WIDTH_2 1 +#define IOFILT_WIDTH_4 2 +#define IOFILT_WIDTH_8 3 +#define IOFILT_WIDTH_16 4 +#define IOFILT_WIDTH_32 5 +#define IOFILT_WIDTH_64 6 +#define IOFILT_WIDTH_128 7 +#define IOFILT_WIDTH_256 8 +#define IOFILT_WIDTH_512 9 +#define IOFILT_WIDTH_1024 10 +#define IOFILT_WIDTH_2048 11 +#define IOFILT_WIDTH_4096 12 +#define IOFILT_WIDTH_8192 13 +#define IOFILT_WIDTH_16384 14 +#define IOFILT_WIDTH_32768 15 + + + +void IOFILT_Init(uint32_t IOFILTn, uint32_t signal, uint32_t width); +void IOFILT_Open(uint32_t IOFILTn); +void IOFILT_Close(uint32_t IOFILTn); + + +#endif // __SWM341_IOFILT_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_jpeg.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_jpeg.c new file mode 100644 index 0000000000..acc329cc4e --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_jpeg.c @@ -0,0 +1,275 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_jpeg.c +* 功能说明: SWM341单片机的JPEG解码器驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_jpeg.h" + +#include <math.h> +#include <string.h> + + +/****************************************************************************************************************************************** +* 函数名称: JPEG_Init() +* 功能说明: JPEG解码器初始化 +* 输 入: JPEG_TypeDef * JPEGx 指定要被设置的JPEG解码器,有效值包括JPEG +* JPEG_InitStructure * initStruct 包含JPEG解码器相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void JPEG_Init(JPEG_TypeDef * JPEGx, JPEG_InitStructure * initStruct) +{ + switch((uint32_t)JPEGx) + { + case ((uint32_t)JPEG): + SYS->CLKEN1 |= (0x01 << SYS_CLKEN1_JPEG_Pos); + break; + } + + JPEGx->IR = JPEG_IR_ICDONE_Msk | + JPEG_IR_ICERROR_Msk; + JPEGx->IR = ((initStruct->DoneIEn ? 1 : 0) << JPEG_IR_IEDONE_Pos) | + ((initStruct->ErrorIEn ? 1 : 0) << JPEG_IR_IEERROR_Pos); + + switch((uint32_t)JPEGx) + { + case ((uint32_t)JPEG): + if(initStruct->DoneIEn | initStruct->ErrorIEn) + { + NVIC_EnableIRQ(JPEG_IRQn); + } + else + { + NVIC_DisableIRQ(JPEG_IRQn); + } + break; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: JPEG_Decode() +* 功能说明: JPEG解码器解码 +* 输 入: JPEG_TypeDef * JPEGx 指定要被设置的JPEG解码器,有效值包括JPEG +* jfif_info_t * jfif_info 要解码图像的信息 +* jpeg_outset_t * jpeg_outset 解码输出设定 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void JPEG_Decode(JPEG_TypeDef * JPEGx, jfif_info_t * jfif_info, jpeg_outset_t * jpeg_outset) +{ + int32_t i, j; + uint8_t hxvx; + uint8_t out_rgb = ((jpeg_outset->format & 7) > 1 ? 1 : 0); // output rgb ? + + switch((jfif_info->CompInfo[0].hfactor << 4) | jfif_info->CompInfo[0].vfactor) + { + case 0x11: hxvx = JPEG_FMT_H1V1; break; + case 0x21: hxvx = JPEG_FMT_H2V1; break; + case 0x22: hxvx = JPEG_FMT_H2V2; break; + default: return; + } + + JPEGx->CFG = (hxvx << JPEG_CFG_SRCFMT_Pos) | + (0 << JPEG_CFG_SCANMOD_Pos) | + (0 << JPEG_CFG_NISCOMP_Pos) | + (jfif_info->CompInfo[0].htab_id_dc << JPEG_CFG_HT1COMP_Pos) | + (jfif_info->CompInfo[1].htab_id_dc << JPEG_CFG_HT2COMP_Pos) | + (jfif_info->CompInfo[2].htab_id_dc << JPEG_CFG_HT3COMP_Pos) | + (jfif_info->CompInfo[0].qtab_id << JPEG_CFG_QT1COMP_Pos) | + (jfif_info->CompInfo[1].qtab_id << JPEG_CFG_QT2COMP_Pos) | + (jfif_info->CompInfo[2].qtab_id << JPEG_CFG_QT3COMP_Pos) | + (jpeg_outset->format << JPEG_CFG_OUTFMT_Pos) | + (out_rgb << JPEG_CFG_YUV2RGB_Pos) | + (jpeg_outset->dither << JPEG_CFG_565DITH_Pos); + + JPEGx->IMGSIZ = ((jfif_info->Width - 1) << JPEG_IMGSIZ_HPIX_Pos) | + ((jfif_info->Height - 1) << JPEG_IMGSIZ_VPIX_Pos); + + JPEGx->CSBASE = jfif_info->CodeAddr; + JPEGx->CODLEN = jfif_info->CodeLen - 1; + + if(out_rgb) + { + JPEGx->RGBASE = jpeg_outset->RGBAddr; + + switch(jpeg_outset->format & 7) + { + case JPEG_OUT_XRGB888: + JPEG->IMGSTR = jfif_info->Width << JPEG_IMGSTR_RGBLINE_Pos; + break; + + case JPEG_OUT_RGB888: + JPEG->IMGSTR = (int)ceil(jfif_info->Width*3/4.0) << JPEG_IMGSTR_RGBLINE_Pos; + break; + + case JPEG_OUT_RGB565: + JPEG->IMGSTR = (int)ceil(jfif_info->Width / 2.0) << JPEG_IMGSTR_RGBLINE_Pos; + break; + } + } + else + { + JPEGx->YBASE = jpeg_outset->YAddr; + JPEGx->UBASE = jpeg_outset->CbAddr; + JPEGx->VBASE = jpeg_outset->CrAddr; + + switch(((jpeg_outset->format & 7) << 4) | hxvx) + { + case (JPEG_OUT_YUV << 4) | JPEG_FMT_H1V1: + JPEG->IMGSTR = ((int)ceil(jfif_info->Width / 4.0) << JPEG_IMGSTR_YLINE_Pos) | + ((int)ceil(jfif_info->Width / 4.0) << JPEG_IMGSTR_UVLINE_Pos); + break; + + case (JPEG_OUT_YUV << 4) | JPEG_FMT_H2V1: + case (JPEG_OUT_YUV << 4) | JPEG_FMT_H2V2: + JPEG->IMGSTR = ((int)ceil(jfif_info->Width / 4.0) << JPEG_IMGSTR_YLINE_Pos) | + ((int)ceil(jfif_info->Width / 8.0) << JPEG_IMGSTR_UVLINE_Pos); + break; + + case (JPEG_OUT_YUVsp << 4) | JPEG_FMT_H1V1: + JPEG->IMGSTR = ((int)ceil(jfif_info->Width / 4.0) << JPEG_IMGSTR_YLINE_Pos) | + ((int)ceil(jfif_info->Width / 2.0) << JPEG_IMGSTR_UVLINE_Pos); + break; + + case (JPEG_OUT_YUVsp << 4) | JPEG_FMT_H2V1: + case (JPEG_OUT_YUVsp << 4) | JPEG_FMT_H2V2: + JPEG->IMGSTR = ((int)ceil(jfif_info->Width / 4.0) << JPEG_IMGSTR_YLINE_Pos) | + ((int)ceil(jfif_info->Width / 4.0) << JPEG_IMGSTR_UVLINE_Pos); + break; + } + } + + for(i = 0; i < jfif_info->QTableCnt; i++) + { + for(j = 0; j < 16; j++) + { + JPEGx->QTABLE[i][j] = ((uint32_t *)&jfif_info->QTable[i])[j]; + } + } + + for(i = 0; i < jfif_info->HTableCnt; i++) + { + /* DC Haffman Table */ + for(j = 0; j < 12; j += 2) + { + JPEGx->HTABLE[i].DC_CODEWORD[j/2] = (jfif_info->HTable[i].DC.codeWord[j] << (16 - jfif_info->HTable[i].DC.codeLen[j])) | + (jfif_info->HTable[i].DC.codeWord[j+1] << (32 - jfif_info->HTable[i].DC.codeLen[j+1])); + } + for(j = 10; j > 1; j -= 2) + { + if((jfif_info->HTable[i].DC.codeWord[j+1] == 0) && (jfif_info->HTable[i].DC.codeWord[j] == 0)) + JPEGx->HTABLE[i].DC_CODEWORD[j/2] = 0xFFFFFFFF; + else if(jfif_info->HTable[i].DC.codeWord[j+1] == 0) + JPEGx->HTABLE[i].DC_CODEWORD[j/2] = 0xFFFF0000 | (jfif_info->HTable[i].DC.codeWord[j] << (16 - jfif_info->HTable[i].DC.codeLen[j])); + else + break; + } + + JPEGx->HTABLE[i].DC_CODELEN[0] = ((jfif_info->HTable[i].DC.codeLen[0] ? jfif_info->HTable[i].DC.codeLen[0] - 1 : 0) << 0) | + ((jfif_info->HTable[i].DC.codeLen[1] ? jfif_info->HTable[i].DC.codeLen[1] - 1 : 0) << 4) | + ((jfif_info->HTable[i].DC.codeLen[2] ? jfif_info->HTable[i].DC.codeLen[2] - 1 : 0) << 8) | + ((jfif_info->HTable[i].DC.codeLen[3] ? jfif_info->HTable[i].DC.codeLen[3] - 1 : 0) << 12) | + ((jfif_info->HTable[i].DC.codeLen[4] ? jfif_info->HTable[i].DC.codeLen[4] - 1 : 0) << 16) | + ((jfif_info->HTable[i].DC.codeLen[5] ? jfif_info->HTable[i].DC.codeLen[5] - 1 : 0) << 20) | + ((jfif_info->HTable[i].DC.codeLen[6] ? jfif_info->HTable[i].DC.codeLen[6] - 1 : 0) << 24) | + ((jfif_info->HTable[i].DC.codeLen[7] ? jfif_info->HTable[i].DC.codeLen[7] - 1 : 0) << 28); + JPEGx->HTABLE[i].DC_CODELEN[1] = ((jfif_info->HTable[i].DC.codeLen[8] ? jfif_info->HTable[i].DC.codeLen[8] - 1 : 0) << 0) | + ((jfif_info->HTable[i].DC.codeLen[9] ? jfif_info->HTable[i].DC.codeLen[9] - 1 : 0) << 4) | + ((jfif_info->HTable[i].DC.codeLen[10] ? jfif_info->HTable[i].DC.codeLen[10]- 1 : 0) << 8) | + ((jfif_info->HTable[i].DC.codeLen[11] ? jfif_info->HTable[i].DC.codeLen[11]- 1 : 0) << 12); + + JPEGx->HTABLE[i].DC_CODEVAL[0] = (jfif_info->HTable[i].DC.codeVal[0] << 0) | + (jfif_info->HTable[i].DC.codeVal[1] << 4) | + (jfif_info->HTable[i].DC.codeVal[2] << 8) | + (jfif_info->HTable[i].DC.codeVal[3] << 12) | + (jfif_info->HTable[i].DC.codeVal[4] << 16) | + (jfif_info->HTable[i].DC.codeVal[5] << 20) | + (jfif_info->HTable[i].DC.codeVal[6] << 24) | + (jfif_info->HTable[i].DC.codeVal[7] << 28); + JPEGx->HTABLE[i].DC_CODEVAL[1] = (jfif_info->HTable[i].DC.codeVal[8] << 0) | + (jfif_info->HTable[i].DC.codeVal[9] << 4) | + (jfif_info->HTable[i].DC.codeVal[10]<< 8) | + (jfif_info->HTable[i].DC.codeVal[11]<< 12); + + /* AC Haffman Table */ + uint16_t minCode[16]; // mini code word for each lenght + uint8_t minIndx[16]; // index of mincode + uint8_t prelen; // preiou Len + + memset(minCode, 0, sizeof(minCode)); + memset(minIndx, 0, sizeof(minIndx)); + for(j = 0, prelen = 0; j < 162; j++) + { + if(jfif_info->HTable[i].AC.codeLen[j] == 0) break; + + if(jfif_info->HTable[i].AC.codeLen[j] != prelen) + { + minCode[jfif_info->HTable[i].AC.codeLen[j] - 1] = jfif_info->HTable[i].AC.codeWord[j] << (16 - jfif_info->HTable[i].AC.codeLen[j]); + minIndx[jfif_info->HTable[i].AC.codeLen[j] - 1] = j; + + prelen = jfif_info->HTable[i].AC.codeLen[j]; + } + } + + if(minCode[15] == 0) minCode[15] = 0xFFFF; + for(j = 14; j > jfif_info->HTable[i].AC.codeLen[0] - 1; j--) + { + if(minCode[j] == 0) minCode[j] = minCode[j+1]; + } + + for(j = 0; j < 16; j += 2) + { + JPEGx->HTABLE[i].AC_CODEWORD[j/2] = (minCode[j] << 0) | + (minCode[j+1] << 16); + } + + for(j = 0; j < 16; j += 4) + { + JPEGx->HTABLE[i].AC_CODEADDR[j/4] = (minIndx[j] << 0) | + (minIndx[j+1] << 8) | + (minIndx[j+2] << 16) | + (minIndx[j+3] << 24); + } + + for(j = 0; j < 164; j += 4) + { + JPEGx->HTABLE[i].AC_CODEVAL[j/4] = (jfif_info->HTable[i].AC.codeVal[j] << 0) | + (jfif_info->HTable[i].AC.codeVal[j+1] << 8) | + (jfif_info->HTable[i].AC.codeVal[j+2] << 16) | + (jfif_info->HTable[i].AC.codeVal[j+3] << 24); + } + } + + JPEGx->CR = (1 << JPEG_CR_LASTBUF_Pos) | + (1 << JPEG_CR_START_Pos); +} + + +/****************************************************************************************************************************************** +* 函数名称: JPEG_DecodeBusy() +* 功能说明: JPEG解码器忙查询 +* 输 入: JPEG_TypeDef * JPEGx 指定要被设置的JPEG解码器,有效值包括JPEG +* 输 出: uint32_t 1 正在解码 0 空闲,未在解码 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t JPEG_DecodeBusy(JPEG_TypeDef * JPEGx) +{ + return (JPEGx->SR & JPEG_SR_BUSY_Msk) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_jpeg.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_jpeg.h new file mode 100644 index 0000000000..ae69a1ad53 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_jpeg.h @@ -0,0 +1,93 @@ +#ifndef __SWM341_JPEG_H__ +#define __SWM341_JPEG_H__ + +#include <stdint.h> + + +typedef struct { + uint8_t DoneIEn; // 解码完成中断使能 + uint8_t ErrorIEn; // 解码出错中断使能 +} JPEG_InitStructure; + + +typedef struct { + uint8_t format; // 解码输出格式,可取值JPEG_OUT_YUV、JPEG_OUT_YUVsp、JPEG_OUT_XRGB888、... + + /* for RGB output */ + uint8_t dither; // RGB565 dithering enable + uint32_t RGBAddr; + + /* for YUV output */ + uint32_t YAddr; + uint32_t CbAddr; + uint32_t CrAddr; +} jpeg_outset_t; // output setting + + +#define JPEG_OUT_YUV 0 +#define JPEG_OUT_YUVsp 1 // semi-planar +#define JPEG_OUT_XRGB888 2 +#define JPEG_OUT_RGB888 3 +#define JPEG_OUT_RGB565 4 +#define JPEG_OUT_YVU (0 | (1 << 4)) +#define JPEG_OUT_YVUsp (1 | (1 << 4)) +#define JPEG_OUT_XBGR888 (2 | (1 << 5)) +#define JPEG_OUT_BGR888 (3 | (1 << 5)) +#define JPEG_OUT_BGR565 (4 | (1 << 5)) +#define JPEG_OUT_BGRX888 (2 | (1 << 6)) +#define JPEG_OUT_RGBX888 (2 | (1 << 5) | (1 << 6)) + + +#define JPEG_FMT_H2V2 0 // YUV420 +#define JPEG_FMT_H2V1 1 // YUV422 +#define JPEG_FMT_H1V1 2 // YUV444 + + + +#define JFIF_QTAB_MAX 3 +#define JFIF_HTAB_MAX 2 + +typedef struct { + uint16_t Width; + uint16_t Height; + + struct { + uint8_t id; // 1:Y 2:Cb 3:Cr + uint8_t hfactor; // 颜色分量水平采样因子 + uint8_t vfactor; // 颜色分量垂直采样因子 + uint8_t qtab_id; // 颜色分量使用的量化表ID + uint8_t htab_id_dc; // 直流分量使用的霍夫曼表ID + uint8_t htab_id_ac; // 交流分量使用的霍夫曼表ID + } CompInfo[3]; // Component Information + uint8_t CompCnt; + + uint8_t QTable[JFIF_QTAB_MAX][64]; + uint8_t QTableCnt; + + struct { + struct { + uint16_t codeWord[16]; + uint8_t codeLen[16]; + uint8_t codeVal[16]; + } DC; + + struct { + uint16_t codeWord[162]; + uint8_t codeLen[162]; + uint8_t codeVal[162]; + } AC; + } HTable[JFIF_HTAB_MAX]; + uint8_t HTableCnt; + + uint32_t CodeAddr; // 待解码数据 + uint32_t CodeLen; +} jfif_info_t; + + + +void JPEG_Init(JPEG_TypeDef * JPEGx, JPEG_InitStructure * initStruct); +void JPEG_Decode(JPEG_TypeDef * JPEGx, jfif_info_t * jfif_info, jpeg_outset_t * jpeg_outset); +uint32_t JPEG_DecodeBusy(JPEG_TypeDef * JPEGx); + + +#endif //__SWM341_JPEG_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_lcd.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_lcd.c new file mode 100644 index 0000000000..cfe0e91a75 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_lcd.c @@ -0,0 +1,301 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_lcd.c +* 功能说明: SWM341单片机的LCD功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_lcd.h" + +#include <string.h> + + +/****************************************************************************************************************************************** +* 函数名称: LCD_Init() +* 功能说明: LCD初始化 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* LCD_InitStructure * initStruct 包含LCD相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_Init(LCD_TypeDef * LCDx, LCD_InitStructure * initStruct) +{ + switch((uint32_t)LCDx) + { + case ((uint32_t)LCD): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_LCD_Pos); + break; + } + + LCDx->CR = ((initStruct->ClkDiv - 2) << LCD_CR_CLKDIV_Pos) | + (initStruct->SampleEdge << LCD_CR_CLKINV_Pos) | + (1 << LCD_CR_CLKALW_Pos) | + ((initStruct->Format & 1) << LCD_CR_FORMAT_Pos) | + ((initStruct->Format >> 1) << LCD_CR_SEREN_Pos) | + (1 << LCD_CR_BURSTEN_Pos) | + (1 << LCD_CR_BURSTLEN_Pos) | + ((1-initStruct->IntEOTEn) << LCD_CR_AUTORESTA_Pos); + + LCDx->CRH = ((initStruct->HsyncWidth - 1) << LCD_CRH_HSW_Pos) | + ((initStruct->Hbp - 1) << LCD_CRH_HBP_Pos) | + ((initStruct->HnPixel - 1) << LCD_CRH_PIX_Pos) | + ((initStruct->Hfp - 1) << LCD_CRH_HFP_Pos); + + LCDx->CRV = ((initStruct->VsyncWidth - 1) << LCD_CRV_VSW_Pos) | + ((initStruct->Vbp - 1) << LCD_CRV_VBP_Pos) | + ((initStruct->VnPixel - 1) << LCD_CRV_PIX_Pos) | + ((initStruct->Vfp - 1) << LCD_CRV_VFP_Pos); + + LCDx->BGC = initStruct->Background; + + LCDx->L[0].LCR = (1 << LCD_LCR_EN_Pos) | + (0 << LCD_LCR_CKEN_Pos) | + (0xFF << LCD_LCR_ALPHA_Pos); + + LCDx->L[0].WHP = (0 << LCD_WHP_STA_Pos) | + ((initStruct->HnPixel - 1) << LCD_WHP_STP_Pos); + + LCDx->L[0].WVP = (0 << LCD_WVP_STA_Pos) | + ((initStruct->VnPixel - 1) << LCD_WVP_STP_Pos); + + LCDx->L[0].ADDR = initStruct->DataSource; + + LCDx->L[0].LLEN = (initStruct->HnPixel - 1); + + LCDx->IF = 1; //清除标志 + LCDx->IE = initStruct->IntEOTEn; + + switch((uint32_t)LCDx) + { + case ((uint32_t)LCD): + if(initStruct->IntEOTEn) NVIC_EnableIRQ(LCD_IRQn); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_LayerInit() +* 功能说明: LCD层初始化 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* uint32_t layerx 要初始化的LCD层,取值LCD_LAYER_1、LCD_LAYER_2 +* LCD_LayerInitStructure * initStruct 包含LCD层相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_LayerInit(LCD_TypeDef * LCDx, uint32_t layerx, LCD_LayerInitStructure * initStruct) +{ + LCDx->L[layerx].LCR = (1 << LCD_LCR_EN_Pos) | + (0 << LCD_LCR_CKEN_Pos) | + (initStruct->Alpha << LCD_LCR_ALPHA_Pos); + + LCDx->L[layerx].WHP = (initStruct->HStart << LCD_WHP_STA_Pos) | + (initStruct->HStop << LCD_WHP_STP_Pos); + + LCDx->L[layerx].WVP = (initStruct->VStart << LCD_WVP_STA_Pos) | + (initStruct->VStop << LCD_WVP_STP_Pos); + + LCDx->L[layerx].ADDR = initStruct->DataSource; + + LCDx->L[layerx].LLEN = (initStruct->HStop - initStruct->HStart); + + LCD->CR |= (1 << LCD_CR_VBPRELOAD_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_SetLayerPos() +* 功能说明: LCD层位置设定 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* uint32_t layerx 要设置的LCD层,取值LCD_LAYER_1、LCD_LAYER_2 +* uint16_t hstart, uint16_t hstop, uint16_t vstart, uint16_t vstop,详细说明见 LCD_LayerInitStructure +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_SetLayerPos(LCD_TypeDef * LCDx, uint32_t layerx, uint16_t hstart, uint16_t hstop, uint16_t vstart, uint16_t vstop) +{ + LCDx->L[layerx].WHP = (hstart << LCD_WHP_STA_Pos) | + (hstop << LCD_WHP_STP_Pos); + + LCDx->L[layerx].WVP = (vstart << LCD_WVP_STA_Pos) | + (vstop << LCD_WVP_STP_Pos); + + LCD->CR |= (1 << LCD_CR_VBPRELOAD_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_Start() +* 功能说明: 启动一次数据传输 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_Start(LCD_TypeDef * LCDx) +{ + LCDx->START |= (1 << LCD_START_GO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_IsBusy() +* 功能说明: 是否正在进行数据传输 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: uint32_t 1 正在传输数据 0 数据传输已完成 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t LCD_IsBusy(LCD_TypeDef * LCDx) +{ + return (LCDx->START & LCD_START_GO_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_INTEn() +* 功能说明: LCD中断使能,完成指定长度的数据传输时触发中断 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_INTEn(LCD_TypeDef * LCDx) +{ + LCDx->IE = 1; +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_INTDis() +* 功能说明: LCD中断禁止,完成指定长度的数据传输时不触发中断 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_INTDis(LCD_TypeDef * LCDx) +{ + LCDx->IE = 0; +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_INTClr() +* 功能说明: LCD中断标志清除 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void LCD_INTClr(LCD_TypeDef * LCDx) +{ + LCDx->IF = 1; +} + +/****************************************************************************************************************************************** +* 函数名称: LCD_INTStat() +* 功能说明: LCD中断状态查询 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: uint32_t 0 未完成指定长度的数据传输 非0 完成指定长度的数据传输 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t LCD_INTStat(LCD_TypeDef * LCDx) +{ + return (LCDx->IF & 1); +} + + +/****************************************************************************************************************************************** +* 函数名称: MPULCD_Init() +* 功能说明: MPU LCD初始化 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* MPULCD_InitStructure * initStruct 包含MPU LCD相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void MPULCD_Init(LCD_TypeDef * LCDx, MPULCD_InitStructure * initStruct) +{ + switch((uint32_t)LCDx) + { + case ((uint32_t)LCD): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_LCD_Pos); + __NOP();__NOP();__NOP(); + break; + } + + LCDx->CR = (1 << LCD_CR_MPUEN_Pos) | + (LCD_FMT_RGB565 << LCD_CR_FORMAT_Pos); //MPU模式只支持RGB565 + + LCDx->L[0].LCR |= (1 << LCD_LCR_EN_Pos); //MPU模式下需要使能Layer1 + + LCDx->MPUCR = ((initStruct->RDHoldTime - 1) << LCD_MPUCR_RDHOLD_Pos) | + ((initStruct->WRHoldTime - 1) << LCD_MPUCR_WRHOLD_Pos) | + ((initStruct->CSFall_WRFall - 1) << LCD_MPUCR_CS0WR0_Pos) | + ((initStruct->WRRise_CSRise - 1) << LCD_MPUCR_WR1CS1_Pos) | + ((initStruct->RDCSRise_Fall - 1) << LCD_MPUCR_RCS1_0_Pos) | + ((initStruct->WRCSRise_Fall - 1) << LCD_MPUCR_WCS1_0_Pos); +} + +void LCD_WR_REG(LCD_TypeDef * LCDx, uint16_t reg) +{ + LCDx->MPUIR = reg; + while(LCD_IsBusy(LCDx)) __NOP(); +} + +void LCD_WR_DATA(LCD_TypeDef * LCDx, uint16_t val) +{ + LCDx->MPUDR = val; + while(LCD_IsBusy(LCDx)) __NOP(); +} + +void LCD_WriteReg(LCD_TypeDef * LCDx, uint16_t reg, uint16_t val) +{ + LCDx->MPUIR = reg; + while(LCD_IsBusy(LCDx)) __NOP(); + + LCDx->MPUDR = val; + while(LCD_IsBusy(LCDx)) __NOP(); +} + +uint16_t LCD_ReadReg(LCD_TypeDef * LCDx, uint16_t reg) +{ + LCDx->MPUIR = reg; + while(LCD_IsBusy(LCDx)) __NOP(); + + return LCDx->MPUDR; +} + +/****************************************************************************************************************************************** +* 函数名称: MPULCD_DMAStart() +* 功能说明: MPU LCD DMA搬运显示数据 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* uint32_t * buff 要搬运的显示数据 +* uint16_t hpix 横向像素数,即每行像素数,必须是偶数 +* uint16_t vpix 纵向像素数,即行数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void MPULCD_DMAStart(LCD_TypeDef * LCDx, uint32_t * buff, uint16_t hpix, uint16_t vpix) +{ + LCDx->MPUAR = (uint32_t)buff; + + LCDx->MPULEN = ((vpix - 1) << LCD_MPULEN_VPIX_Pos) | + ((hpix - 1) << LCD_MPULEN_HPIX_Pos); + + LCDx->START |= (1 << LCD_START_GO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: MPULCD_DMABusy() +* 功能说明: MPU LCD DMA搬运显示数据忙查询 +* 输 入: LCD_TypeDef * LCDx 指定要被设置的LCD,有效值包括LCD +* 输 出: uint32_t 1 搬运中 0 搬运完成 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t MPULCD_DMABusy(LCD_TypeDef * LCDx) +{ + return (LCDx->START & LCD_START_GO_Msk) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_lcd.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_lcd.h new file mode 100644 index 0000000000..ae60d63a53 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_lcd.h @@ -0,0 +1,81 @@ +#ifndef __SWM341_LCD_H__ +#define __SWM341_LCD_H__ + + +typedef struct { + uint8_t ClkDiv; //取值范围2--65 + uint8_t Format; //LCD_FMT_RGB565、LCD_FMT_RGB888、LCD_FMT_SRGB565、LCD_FMT_SRGB888 + uint16_t HnPixel; //水平方向像素个数,最大取值1024 + uint16_t VnPixel; //垂直方向像素个数,最大取值1024 + uint8_t Hfp; //horizonal front porch,最大取值64 + uint16_t Hbp; //horizonal back porch, 最大取值256 + uint8_t Vfp; //vertical front porch, 最大取值64 + uint16_t Vbp; //vertical back porch, 最大取值256 + uint16_t HsyncWidth; //HSYNC低电平持续多少个DOTCLK,最大取值256 + uint16_t VsyncWidth; //VSYNC低电平持续多少个行时间,最大取值256 + + uint32_t DataSource; //显示数据地址 + uint32_t Background; //背景颜色 + uint8_t SampleEdge; //屏幕在DOTCLK的哪个边沿采样数据:LCD_SAMPLE_RISE、LCD_SAMPLE_FALL + + uint8_t IntEOTEn; //End of Transter(传输完成)中断使能 +} LCD_InitStructure; + + +typedef struct { + uint8_t Alpha; + uint16_t HStart; //水平方向起始位置,取值范围0 ~ HnPixel-1 + uint16_t HStop; //水平方向终止位置(包含),不得小于HStart,且 HStop - HStart 结果必须为奇数 + uint16_t VStart; + uint16_t VStop; + uint32_t DataSource; //显示数据地址 +} LCD_LayerInitStructure; + + +#define LCD_FMT_RGB565 0 +#define LCD_FMT_RGB888 1 +#define LCD_FMT_SRGB565 2 //Serial RGB +#define LCD_FMT_SRGB888 3 + +#define LCD_SAMPLE_RISE 0 //屏幕在DOTCLK的上升沿采样数据 +#define LCD_SAMPLE_FALL 1 //屏幕在DOTCLK的下降沿采样数据 + +#define LCD_LAYER_1 0 +#define LCD_LAYER_2 1 + + +void LCD_Init(LCD_TypeDef * LCDx, LCD_InitStructure * initStruct); +void LCD_LayerInit(LCD_TypeDef * LCDx, uint32_t layerx, LCD_LayerInitStructure * initStruct); +void LCD_SetLayerPos(LCD_TypeDef * LCDx, uint32_t layerx, uint16_t hstart, uint16_t hstop, uint16_t vstart, uint16_t vstop); +void LCD_Start(LCD_TypeDef * LCDx); +uint32_t LCD_IsBusy(LCD_TypeDef * LCDx); + +void LCD_INTEn(LCD_TypeDef * LCDx); +void LCD_INTDis(LCD_TypeDef * LCDx); +void LCD_INTClr(LCD_TypeDef * LCDx); +uint32_t LCD_INTStat(LCD_TypeDef * LCDx); + + + +typedef struct { + uint8_t RDHoldTime; //LCD_RD低电平保持时间,取值1--32 + uint8_t WRHoldTime; //LCD_WR低电平保持时间,取值1--16 + uint8_t CSFall_WRFall; //LCD_CS下降沿到LCD_WR下降沿延时,取值1--4 + uint8_t WRRise_CSRise; //LCD_WR上升沿到LCD_CS上升沿延时,取值1--4 + uint8_t RDCSRise_Fall; //读操作时,LCD_CS上升沿到下降沿延时,取值1--32 + uint8_t WRCSRise_Fall; //写操作时,LCD_CS上升沿到下降沿延时,取值1--16 +} MPULCD_InitStructure; + + +void MPULCD_Init(LCD_TypeDef * LCDx, MPULCD_InitStructure * initStruct); + +void LCD_WR_REG(LCD_TypeDef * LCDx, uint16_t reg); +void LCD_WR_DATA(LCD_TypeDef * LCDx, uint16_t val); +void LCD_WriteReg(LCD_TypeDef * LCDx, uint16_t reg, uint16_t val); +uint16_t LCD_ReadReg(LCD_TypeDef * LCDx, uint16_t reg); + +void MPULCD_DMAStart(LCD_TypeDef * LCDx, uint32_t * buff, uint16_t hpix, uint16_t vpix); +uint32_t MPULCD_DMABusy(LCD_TypeDef * LCDx); + + +#endif //__SWM341_LCD_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_port.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_port.c new file mode 100644 index 0000000000..96135b5d3e --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_port.c @@ -0,0 +1,50 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_port.c +* 功能说明: SWM341单片机的端口引脚功能选择库函数 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_port.h" + + +/****************************************************************************************************************************************** +* 函数名称: PORT_Init() +* 功能说明: 端口引脚功能选择 +* 输 入: PORT_TypeDef * PORTx 指定PORT端口,有效值包括PORTA、PORTB、PORTC、PORTD、PORTE、PORTM、PORTN +* uint32_t n 指定PORT引脚,有效值包括PIN0、PIN1、PIN2、... ... PIN14、PIN15 +* uint32_t func 指定端口引脚要设定的功能,其可取值见"SWM201_port.h"文件 +* uint32_t digit_in_en 数字输入使能 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PORT_Init(PORT_TypeDef * PORTx, uint32_t n, uint32_t func, uint32_t digit_in_en) +{ + if(n < PIN8) + { + PORTx->FUNC0 &= ~(0x0F << (n*4)); + PORTx->FUNC0 |= (func << (n*4)); + } + else + { + PORTx->FUNC1 &= ~(0x0F << ((n-8)*4)); + PORTx->FUNC1 |= (func << ((n-8)*4)); + } + + if(digit_in_en) PORTx->INEN |= (1 << n); + else PORTx->INEN &= ~(1 << n); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_port.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_port.h new file mode 100644 index 0000000000..41ce188c86 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_port.h @@ -0,0 +1,648 @@ +#ifndef __SWM341_PORT_H__ +#define __SWM341_PORT_H__ + +void PORT_Init(PORT_TypeDef * PORTx, uint32_t n, uint32_t func, uint32_t digit_in_en); //端口引脚功能选择,其可取值如下: + + + +#define PORTA_PIN0_GPIO 0 +#define PORTA_PIN0_I2C0_SDA 1 +#define PORTA_PIN0_UART1_TX 2 +#define PORTA_PIN0_HALL0_IN0 3 +#define PORTA_PIN0_LCD_B7 4 +#define PORTA_PIN0_ACMP2_INP 15 + +#define PORTA_PIN1_GPIO 0 +#define PORTA_PIN1_I2C0_SCL 1 +#define PORTA_PIN1_UART2_RTS 2 +#define PORTA_PIN1_HALL0_IN1 3 +#define PORTA_PIN1_LCD_B3 4 +#define PORTA_PIN1_ACMP1_INP 15 + +#define PORTA_PIN2_GPIO 0 +#define PORTA_PIN2_UART1_RX 1 +#define PORTA_PIN2_PWM_BRK0 2 +#define PORTA_PIN2_HALL0_IN2 3 +#define PORTA_PIN2_LCD_B4 4 +#define PORTA_PIN2_ACMP0_INP 15 + +#define PORTA_PIN3_GPIO 0 +#define PORTA_PIN3_I2C0_SDA 1 +#define PORTA_PIN3_LCD_B6 2 +#define PORTA_PIN3_XTAL_IN 15 + +#define PORTA_PIN4_GPIO 0 +#define PORTA_PIN4_I2C0_SCL 1 +#define PORTA_PIN4_LCD_B5 2 +#define PORTA_PIN4_XTAL_OUT 15 + +#define PORTA_PIN5_GPIO 0 +#define PORTA_PIN5_PWM_BRK1 1 +#define PORTA_PIN5_PWM_CLK1 2 +#define PORTA_PIN5_SDR_LDQM 3 + +#define PORTA_PIN6_GPIO 0 +#define PORTA_PIN6_I2C1_SDA 1 +#define PORTA_PIN6_PWM_BRK0 2 +#define PORTA_PIN6_PWM_CLK0 3 + +#define PORTA_PIN7_GPIO 0 +#define PORTA_PIN7_I2C1_SCL 1 +#define PORTA_PIN7_TIMR3_IN 2 +#define PORTA_PIN7_TIMR3_OUT 3 + +#define PORTA_PIN8_GPIO 0 + +#define PORTA_PIN9_GPIO 0 +#define PORTA_PIN9_CAN0_RX 1 +#define PORTA_PIN9_LCD_B5 2 +#define PORTA_PIN9_OPA1_INN 15 + +#define PORTA_PIN10_GPIO 0 +#define PORTA_PIN10_UART0_CTS 1 +#define PORTA_PIN10_PWM_CLK1 2 +#define PORTA_PIN10_BTIMR3_OUT 3 +#define PORTA_PIN10_CAN0_TX 4 +#define PORTA_PIN10_LCD_B6 5 +#define PORTA_PIN10_ADC0_CH11 15 +#define PORTA_PIN10_OPA1_OUT 15 + +#define PORTA_PIN11_GPIO 0 +#define PORTA_PIN11_UART0_RTS 1 +#define PORTA_PIN11_PWM_CLK0 2 +#define PORTA_PIN11_BTIMR2_OUT 3 +#define PORTA_PIN11_LCD_B7 4 +#define PORTA_PIN11_ADC1_TRIG1 5 +#define PORTA_PIN11_OPA1_INP 15 + +#define PORTA_PIN12_GPIO 0 +#define PORTA_PIN12_UART0_RX 1 +#define PORTA_PIN12_HALL3_IN0 2 +#define PORTA_PIN12_BTIMR1_OUT 3 +#define PORTA_PIN12_LCD_G0 4 +#define PORTA_PIN12_ADC0_TRIG1 5 +#define PORTA_PIN12_ADC0_CH10 15 + +#define PORTA_PIN13_GPIO 0 +#define PORTA_PIN13_UART0_TX 1 +#define PORTA_PIN13_HALL3_IN1 2 +#define PORTA_PIN13_BTIMR0_OUT 3 +#define PORTA_PIN13_LCD_G1 4 +#define PORTA_PIN13_ADC0_CH9 15 +#define PORTA_PIN13_OPA3_INN 15 + +#define PORTA_PIN14_GPIO 0 +#define PORTA_PIN14_HALL3_IN2 1 +#define PORTA_PIN14_LCD_G2 2 +#define PORTA_PIN14_ADC0_CH8 15 +#define PORTA_PIN14_OPA3_INP 15 + +#define PORTA_PIN15_GPIO 0 +#define PORTA_PIN15_HALL3_IN0 1 +#define PORTA_PIN15_LCD_G3 2 +#define PORTA_PIN15_ADC0_CH7 15 +#define PORTA_PIN15_OPA3_OUT 15 + +#define PORTB_PIN0_GPIO 0 +#define PORTB_PIN0_UART1_TX 1 +#define PORTB_PIN0_PWM3BN 2 +#define PORTB_PIN0_DMA_TRIG1 3 +#define PORTB_PIN0_TIMR1_IN 4 +#define PORTB_PIN0_TIMR1_OUT 5 +#define PORTB_PIN0_SD_D6 6 + +#define PORTB_PIN1_GPIO 0 +#define PORTB_PIN1_PWM3B 1 +#define PORTB_PIN1_TIMR0_IN 2 +#define PORTB_PIN1_TIMR0_OUT 3 +#define PORTB_PIN1_LCD_B0 4 +#define PORTB_PIN1_SD_D7 5 + +#define PORTB_PIN2_GPIO 0 +#define PORTB_PIN2_SPI1_SCLK 1 +#define PORTB_PIN2_UART3_RTS 2 +#define PORTB_PIN2_PWM2B 3 +#define PORTB_PIN2_BTIMR3_OUT 4 +#define PORTB_PIN2_CAN1_TX 5 +#define PORTB_PIN2_LCD_CS 6 +#define PORTB_PIN2_LCD_VSYNC 6 + +#define PORTB_PIN3_GPIO 0 +#define PORTB_PIN3_SPI1_MISO 1 +#define PORTB_PIN3_UART3_TX 2 +#define PORTB_PIN3_PWM2A 3 +#define PORTB_PIN3_HALL0_IN0 4 +#define PORTB_PIN3_BTIMR2_OUT 5 +#define PORTB_PIN3_CAN1_RX 6 +#define PORTB_PIN3_LCD_WR 7 +#define PORTB_PIN3_LCD_HSYNC 7 + +#define PORTB_PIN4_GPIO 0 +#define PORTB_PIN4_SPI1_MOSI 1 +#define PORTB_PIN4_UART3_RX 2 +#define PORTB_PIN4_HALL0_IN1 3 +#define PORTB_PIN4_BTIMR1_OUT 4 +#define PORTB_PIN4_CAN0_TX 5 +#define PORTB_PIN4_LCD_RS 6 +#define PORTB_PIN4_LCD_DEN 6 +#define PORTB_PIN4_ACMP2_INN 15 + +#define PORTB_PIN5_GPIO 0 +#define PORTB_PIN5_SPI1_SSEL 1 +#define PORTB_PIN5_UART3_CTS 2 +#define PORTB_PIN5_HALL0_IN2 3 +#define PORTB_PIN5_BTIMR0_OUT 4 +#define PORTB_PIN5_CAN0_RX 5 +#define PORTB_PIN5_LCD_RD 6 +#define PORTB_PIN5_LCD_DCLK 6 +#define PORTB_PIN5_ACMP1_INN 15 + +#define PORTB_PIN6_GPIO 0 +#define PORTB_PIN6_SDR_LDQM 1 + +#define PORTB_PIN7_GPIO 0 +#define PORTB_PIN7_SDR_WE 1 + +#define PORTB_PIN8_GPIO 0 +#define PORTB_PIN8_SPI0_SCLK 1 +#define PORTB_PIN8_TIMR3_IN 2 +#define PORTB_PIN8_TIMR3_OUT 3 +#define PORTB_PIN8_SDR_CAS 4 + +#define PORTB_PIN9_GPIO 0 +#define PORTB_PIN9_SPI0_MISO 1 +#define PORTB_PIN9_TIMR2_IN 2 +#define PORTB_PIN9_TIMR2_OUT 3 +#define PORTB_PIN9_SDR_RAS 4 + +#define PORTB_PIN10_GPIO 0 +#define PORTB_PIN10_SPI0_MOSI 1 +#define PORTB_PIN10_TIMR1_IN 2 +#define PORTB_PIN10_TIMR1_OUT 3 +#define PORTB_PIN10_SDR_CS 4 + +#define PORTB_PIN11_GPIO 0 +#define PORTB_PIN11_JTAG_TDO 1 +#define PORTB_PIN11_UART2_TX 2 +#define PORTB_PIN11_PWM_BRK2 3 +#define PORTB_PIN11_TIMR0_IN 4 +#define PORTB_PIN11_TIMR0_OUT 5 +#define PORTB_PIN11_LCD_B1 6 + +#define PORTB_PIN12_GPIO 0 +#define PORTB_PIN12_SWDCK 1 +#define PORTB_PIN12_JTAG_TCK 1 +#define PORTB_PIN12_UART0_RX 2 +#define PORTB_PIN12_PWM4BN 3 +#define PORTB_PIN12_TIMR3_IN 4 +#define PORTB_PIN12_TIMR3_OUT 5 +#define PORTB_PIN12_ACMP0_INN 15 + +#define PORTB_PIN13_GPIO 0 +#define PORTB_PIN13_JTAG_TDI 1 +#define PORTB_PIN13_I2C1_SDA 2 +#define PORTB_PIN13_UART2_RX 3 +#define PORTB_PIN13_PWM4B 4 +#define PORTB_PIN13_TIMR2_IN 5 +#define PORTB_PIN13_TIMR2_OUT 6 +#define PORTB_PIN13_LCD_B2 7 + +#define PORTB_PIN14_GPIO 0 +#define PORTB_PIN14_SWDIO 1 +#define PORTB_PIN14_JTAG_TMS 1 +#define PORTB_PIN14_SPI0_SSEL 2 +#define PORTB_PIN14_UART0_TX 3 +#define PORTB_PIN14_PWM4AN 4 +#define PORTB_PIN14_TIMR1_IN 5 +#define PORTB_PIN14_TIMR1_OUT 6 + +#define PORTB_PIN15_GPIO 0 +#define PORTB_PIN15_JTAG_TRST 1 +#define PORTB_PIN15_I2C1_SCL 2 +#define PORTB_PIN15_UART2_CTS 3 +#define PORTB_PIN15_PWM4A 4 +#define PORTB_PIN15_TIMR0_IN 5 +#define PORTB_PIN15_TIMR0_OUT 6 +#define PORTB_PIN15_LCD_B3 7 + +#define PORTC_PIN0_GPIO 0 +#define PORTC_PIN0_UART2_TX 1 +#define PORTC_PIN0_HALL3_IN1 2 +#define PORTC_PIN0_TIMR1_IN 3 +#define PORTC_PIN0_TIMR1_OUT 4 +#define PORTC_PIN0_LCD_G4 5 +#define PORTC_PIN0_ADC0_CH6 15 + +#define PORTC_PIN1_GPIO 0 +#define PORTC_PIN1_I2C0_SDA 1 +#define PORTC_PIN1_UART2_RX 2 +#define PORTC_PIN1_HALL3_IN2 3 +#define PORTC_PIN1_TIMR0_IN 4 +#define PORTC_PIN1_TIMR0_OUT 5 +#define PORTC_PIN1_LCD_G5 6 +#define PORTC_PIN1_ADC0_CH5 15 +#define PORTC_PIN1_OPA2_INN 15 + +#define PORTC_PIN2_GPIO 0 +#define PORTC_PIN2_I2C0_SCL 1 +#define PORTC_PIN2_UART3_RX 2 +#define PORTC_PIN2_PWM3A 3 +#define PORTC_PIN2_TIMR2_IN 4 +#define PORTC_PIN2_TIMR2_OUT 5 +#define PORTC_PIN2_LCD_G6 6 +#define PORTC_PIN2_ADC0_CH4 15 +#define PORTC_PIN2_OPA2_INP 15 + +#define PORTC_PIN3_GPIO 0 +#define PORTC_PIN3_UART3_TX 1 +#define PORTC_PIN3_PWM3AN 2 +#define PORTC_PIN3_BTIMR11_OUT 3 +#define PORTC_PIN3_TIMR3_IN 4 +#define PORTC_PIN3_TIMR3_OUT 5 +#define PORTC_PIN3_LCD_G7 6 +#define PORTC_PIN3_ADC0_CH3 15 +#define PORTC_PIN3_OPA2_OUT 15 + +#define PORTC_PIN4_GPIO 0 +#define PORTC_PIN4_I2C1_SDA 1 +#define PORTC_PIN4_SPI1_SSEL 2 +#define PORTC_PIN4_BTIMR10_OUT 3 +#define PORTC_PIN4_TIMR4_IN 4 +#define PORTC_PIN4_TIMR4_OUT 5 +#define PORTC_PIN4_LCD_R0 6 +#define PORTC_PIN4_ADC0_CH2 15 + +#define PORTC_PIN5_GPIO 0 +#define PORTC_PIN5_I2C1_SCL 1 +#define PORTC_PIN5_SPI1_MISO 2 +#define PORTC_PIN5_BTIMR9_OUT 3 +#define PORTC_PIN5_LCD_R1 4 +#define PORTC_PIN5_ADC0_CH1 15 +#define PORTC_PIN5_OPA0_INN 15 + +#define PORTC_PIN6_GPIO 0 +#define PORTC_PIN6_SPI1_MOSI 1 +#define PORTC_PIN6_BTIMR8_OUT 2 +#define PORTC_PIN6_ADC0_CH0 15 + +#define PORTC_PIN7_GPIO 0 +#define PORTC_PIN7_SPI1_SCLK 1 + +#define PORTC_PIN8_GPIO 0 +#define PORTC_PIN8_LCD_R2 1 +#define PORTC_PIN8_OPA0_INP 15 + +#define PORTC_PIN9_GPIO 0 +#define PORTC_PIN9_BTIMR7_OUT 1 +#define PORTC_PIN9_TIMR2_IN 2 +#define PORTC_PIN9_TIMR2_OUT 3 +#define PORTC_PIN9_LCD_R3 4 +#define PORTC_PIN9_ADC1_CH6 15 +#define PORTC_PIN9_OPA0_OUT 15 + +#define PORTC_PIN10_GPIO 0 +#define PORTC_PIN10_BTIMR6_OUT 1 +#define PORTC_PIN10_TIMR1_IN 2 +#define PORTC_PIN10_TIMR1_OUT 3 +#define PORTC_PIN10_LCD_R4 4 +#define PORTC_PIN10_ADC1_CH5 15 + +#define PORTC_PIN11_GPIO 0 +#define PORTC_PIN11_BTIMR5_OUT 1 +#define PORTC_PIN11_TIMR0_IN 2 +#define PORTC_PIN11_TIMR0_OUT 3 +#define PORTC_PIN11_LCD_R5 4 +#define PORTC_PIN11_ADC1_CH4 15 + +#define PORTC_PIN12_GPIO 0 +#define PORTC_PIN12_UART0_RX 1 +#define PORTC_PIN12_BTIMR4_OUT 2 +#define PORTC_PIN12_LCD_R6 3 +#define PORTC_PIN12_ADC1_CH3 15 + +#define PORTC_PIN13_GPIO 0 +#define PORTC_PIN13_I2C0_SDA 1 +#define PORTC_PIN13_UART0_TX 2 +#define PORTC_PIN13_BTIMR3_OUT 3 +#define PORTC_PIN13_TIMR4_IN 4 +#define PORTC_PIN13_TIMR4_OUT 5 +#define PORTC_PIN13_LCD_R7 6 +#define PORTC_PIN13_ADC1_CH2 15 + +#define PORTC_PIN14_GPIO 0 +#define PORTC_PIN14_SDR_D14 1 + +#define PORTC_PIN15_GPIO 0 +#define PORTC_PIN15_SDR_D15 1 + +#define PORTD_PIN0_GPIO 0 +#define PORTD_PIN0_I2C0_SCL 1 +#define PORTD_PIN0_TIMR3_IN 2 +#define PORTD_PIN0_TIMR3_OUT 3 +#define PORTD_PIN0_LCD_R4 4 +#define PORTD_PIN0_ADC1_CH1 15 + +#define PORTD_PIN1_GPIO 0 +#define PORTD_PIN1_LCD_R5 1 +#define PORTD_PIN1_ADC1_CH0 15 + +#define PORTD_PIN2_GPIO 0 +#define PORTD_PIN2_QEI_Z 1 +#define PORTD_PIN2_HALL3_IN0 2 +#define PORTD_PIN2_DAC_OUT 15 + +#define PORTD_PIN3_GPIO 0 +#define PORTD_PIN3_QEI_B 1 +#define PORTD_PIN3_FSPI_DATA2 2 +#define PORTD_PIN3_UART1_TX 3 +#define PORTD_PIN3_HALL3_IN1 4 +#define PORTD_PIN3_CAN1_TX 5 +#define PORTD_PIN3_ADC1_TRIG1 6 + +#define PORTD_PIN4_GPIO 0 +#define PORTD_PIN4_QEI_A 1 +#define PORTD_PIN4_FSPI_DATA3 2 +#define PORTD_PIN4_UART1_RX 3 +#define PORTD_PIN4_HALL3_IN2 4 +#define PORTD_PIN4_BTIMR11_OUT 5 +#define PORTD_PIN4_CAN1_RX 6 +#define PORTD_PIN4_ADC0_TRIG1 7 + +#define PORTD_PIN5_GPIO 0 +#define PORTD_PIN5_FSPI_SCLK 1 +#define PORTD_PIN5_UART3_TX 2 +#define PORTD_PIN5_PWM_CLK1 3 +#define PORTD_PIN5_BTIMR10_OUT 4 +#define PORTD_PIN5_CAN0_TX 5 + +#define PORTD_PIN6_GPIO 0 +#define PORTD_PIN6_FSPI_SSEL 1 +#define PORTD_PIN6_UART3_RX 2 +#define PORTD_PIN6_PWM_CLK0 3 +#define PORTD_PIN6_BTIMR9_OUT 4 +#define PORTD_PIN6_CAN0_RX 5 +#define PORTD_PIN6_WAKEUP 15 + +#define PORTD_PIN7_GPIO 0 +#define PORTD_PIN7_QEI_DIR 1 +#define PORTD_PIN7_I2C1_SDA 2 +#define PORTD_PIN7_FSPI_MISO 3 +#define PORTD_PIN7_BTIMR8_OUT 4 + +#define PORTD_PIN8_GPIO 0 +#define PORTD_PIN8_I2C1_SCL 1 +#define PORTD_PIN8_FSPI_MOSI 2 +#define PORTD_PIN8_PWM1BN 3 +#define PORTD_PIN8_TIMR4_IN 4 +#define PORTD_PIN8_TIMR4_OUT 5 + +#define PORTD_PIN9_GPIO 0 +#define PORTD_PIN9_PWM1B 1 +#define PORTD_PIN9_TIMR3_IN 2 +#define PORTD_PIN9_TIMR3_OUT 3 + +#define PORTD_PIN10_GPIO 0 +#define PORTD_PIN10_PWM_CLK1 1 +#define PORTD_PIN10_SDR_UDQM 2 + +#define PORTD_PIN11_GPIO 0 +#define PORTD_PIN11_PWM_CLK0 1 + +#define PORTD_PIN12_GPIO 0 + +#define PORTD_PIN13_GPIO 0 + +#define PORTD_PIN14_GPIO 0 + +#define PORTD_PIN15_GPIO 0 +#define PORTD_PIN15_WAKEUP 15 + +#define PORTE_PIN0_GPIO 0 +#define PORTE_PIN0_SDR_D7 1 + +#define PORTE_PIN1_GPIO 0 +#define PORTE_PIN1_SDR_D6 1 + +#define PORTE_PIN2_GPIO 0 +#define PORTE_PIN2_SDR_D5 1 + +#define PORTE_PIN3_GPIO 0 +#define PORTE_PIN3_SDR_D4 1 + +#define PORTE_PIN4_GPIO 0 +#define PORTE_PIN4_SDR_D3 1 + +#define PORTE_PIN5_GPIO 0 +#define PORTE_PIN5_SDR_D2 1 + +#define PORTE_PIN6_GPIO 0 +#define PORTE_PIN6_SDR_D1 1 + +#define PORTE_PIN7_GPIO 0 +#define PORTE_PIN7_SDR_D0 1 + +#define PORTE_PIN8_GPIO 0 +#define PORTE_PIN8_SDR_D8 1 + +#define PORTE_PIN9_GPIO 0 +#define PORTE_PIN9_SDR_D9 1 + +#define PORTE_PIN10_GPIO 0 +#define PORTE_PIN10_SDR_D10 1 + +#define PORTE_PIN11_GPIO 0 +#define PORTE_PIN11_SDR_D11 1 + +#define PORTE_PIN12_GPIO 0 +#define PORTE_PIN12_SDR_D12 1 + +#define PORTE_PIN13_GPIO 0 +#define PORTE_PIN13_SDR_D13 1 + +#define PORTE_PIN14_GPIO 0 +#define PORTE_PIN14_SDR_BA1 1 + +#define PORTE_PIN15_GPIO 0 +#define PORTE_PIN15_SDR_BA0 1 + +#define PORTM_PIN0_GPIO 0 +#define PORTM_PIN0_UART0_RX 1 +#define PORTM_PIN0_PWM_BRK1 2 +#define PORTM_PIN0_CAN1_TX 3 + +#define PORTM_PIN1_GPIO 0 +#define PORTM_PIN1_UART0_TX 1 +#define PORTM_PIN1_PWM0A 2 +#define PORTM_PIN1_TIMR2_IN 3 +#define PORTM_PIN1_TIMR2_OUT 4 +#define PORTM_PIN1_CAN1_RX 5 + +#define PORTM_PIN2_GPIO 0 +#define PORTM_PIN2_SPI0_SCLK 1 +#define PORTM_PIN2_UART1_RX 2 +#define PORTM_PIN2_PWM0B 3 +#define PORTM_PIN2_BTIMR3_OUT 4 +#define PORTM_PIN2_TIMR1_IN 5 +#define PORTM_PIN2_TIMR1_OUT 6 +#define PORTM_PIN2_SD_CLK 7 + +#define PORTM_PIN3_GPIO 0 +#define PORTM_PIN3_SPI0_SSEL 1 +#define PORTM_PIN3_UART1_TX 2 +#define PORTM_PIN3_PWM1A 3 +#define PORTM_PIN3_BTIMR2_OUT 4 +#define PORTM_PIN3_TIMR0_IN 5 +#define PORTM_PIN3_TIMR0_OUT 6 +#define PORTM_PIN3_SD_DET 7 + +#define PORTM_PIN4_GPIO 0 +#define PORTM_PIN4_SPI0_MISO 1 +#define PORTM_PIN4_UART3_TX 2 +#define PORTM_PIN4_PWM0AN 3 +#define PORTM_PIN4_BTIMR1_OUT 4 +#define PORTM_PIN4_TIMR2_IN 5 +#define PORTM_PIN4_TIMR2_OUT 6 +#define PORTM_PIN4_LCD_CS 7 +#define PORTM_PIN4_LCD_VSYNC 7 +#define PORTM_PIN4_SD_CMD 8 + +#define PORTM_PIN5_GPIO 0 +#define PORTM_PIN5_I2C1_SDA 1 +#define PORTM_PIN5_SPI0_MOSI 2 +#define PORTM_PIN5_UART3_RX 3 +#define PORTM_PIN5_PWM0BN 4 +#define PORTM_PIN5_BTIMR0_OUT 5 +#define PORTM_PIN5_TIMR1_IN 6 +#define PORTM_PIN5_TIMR1_OUT 7 +#define PORTM_PIN5_SD_D0 8 + +#define PORTM_PIN6_GPIO 0 +#define PORTM_PIN6_I2C1_SCL 1 +#define PORTM_PIN6_UART2_RX 2 +#define PORTM_PIN6_PWM1AN 3 +#define PORTM_PIN6_TIMR0_IN 4 +#define PORTM_PIN6_TIMR0_OUT 5 +#define PORTM_PIN6_SD_D1 6 + +#define PORTM_PIN7_GPIO 0 +#define PORTM_PIN7_UART2_TX 1 + +#define PORTM_PIN8_GPIO 0 +#define PORTM_PIN8_PWM2BN 1 +#define PORTM_PIN8_CAN0_TX 2 +#define PORTM_PIN8_LCD_WR 3 +#define PORTM_PIN8_LCD_HSYNC 3 + +#define PORTM_PIN9_GPIO 0 +#define PORTM_PIN9_PWM2AN 1 +#define PORTM_PIN9_CAN0_RX 2 + +#define PORTM_PIN10_GPIO 0 +#define PORTM_PIN10_PWM3A 1 + +#define PORTM_PIN11_GPIO 0 +#define PORTM_PIN11_PWM2B 1 +#define PORTM_PIN11_LCD_RS 2 +#define PORTM_PIN11_LCD_DEN 2 + +#define PORTM_PIN12_GPIO 0 +#define PORTM_PIN12_PWM2A 1 +#define PORTM_PIN12_SDR_UDQM 2 + +#define PORTM_PIN13_GPIO 0 +#define PORTM_PIN13_PWM_BRK0 1 +#define PORTM_PIN13_SDR_CLK 2 + +#define PORTM_PIN14_GPIO 0 +#define PORTM_PIN14_TIMR3_IN 1 +#define PORTM_PIN14_TIMR3_OUT 2 +#define PORTM_PIN14_SDR_CKE 3 + +#define PORTM_PIN15_GPIO 0 +#define PORTM_PIN15_TIMR2_IN 1 +#define PORTM_PIN15_TIMR2_OUT 2 +#define PORTM_PIN15_SDR_A12 3 + +#define PORTN_PIN0_GPIO 0 +#define PORTN_PIN0_SPI1_SCLK 1 +#define PORTN_PIN0_PWM3AN 2 +#define PORTN_PIN0_BTIMR7_OUT 3 +#define PORTN_PIN0_TIMR1_IN 4 +#define PORTN_PIN0_TIMR1_OUT 5 +#define PORTN_PIN0_LCD_RD 6 +#define PORTN_PIN0_LCD_DCLK 6 +#define PORTN_PIN0_SD_D2 7 + +#define PORTN_PIN1_GPIO 0 +#define PORTN_PIN1_SPI1_SSEL 1 +#define PORTN_PIN1_PWM2BN 2 +#define PORTN_PIN1_BTIMR6_OUT 3 +#define PORTN_PIN1_TIMR0_IN 4 +#define PORTN_PIN1_TIMR0_OUT 5 +#define PORTN_PIN1_SD_D3 6 + +#define PORTN_PIN2_GPIO 0 +#define PORTN_PIN2_SDR_A11 1 + +#define PORTN_PIN3_GPIO 0 +#define PORTN_PIN3_UART1_CTS 1 +#define PORTN_PIN3_SDR_A9 2 + +#define PORTN_PIN4_GPIO 0 +#define PORTN_PIN4_I2C0_SDA 1 +#define PORTN_PIN4_SPI1_MISO 2 +#define PORTN_PIN4_UART1_RTS 3 +#define PORTN_PIN4_PWM2AN 4 +#define PORTN_PIN4_BTIMR5_OUT 5 +#define PORTN_PIN4_TIMR3_IN 6 +#define PORTN_PIN4_TIMR3_OUT 7 +#define PORTN_PIN4_CAN0_TX 8 +#define PORTN_PIN4_SD_D4 9 +#define PORTN_PIN4_ADC1_TRIG0 10 + +#define PORTN_PIN5_GPIO 0 +#define PORTN_PIN5_I2C0_SCL 1 +#define PORTN_PIN5_SPI1_MOSI 2 +#define PORTN_PIN5_UART1_RX 3 +#define PORTN_PIN5_PWM3A 4 +#define PORTN_PIN5_DMA_TRIG0 5 +#define PORTN_PIN5_BTIMR4_OUT 6 +#define PORTN_PIN5_TIMR2_IN 7 +#define PORTN_PIN5_TIMR2_OUT 8 +#define PORTN_PIN5_CAN0_RX 9 +#define PORTN_PIN5_LCD_R3 10 +#define PORTN_PIN5_SD_D5 11 +#define PORTN_PIN5_ADC0_TRIG0 12 + +#define PORTN_PIN6_GPIO 0 +#define PORTN_PIN6_SDR_A8 1 + +#define PORTN_PIN7_GPIO 0 +#define PORTN_PIN7_SDR_A7 1 + +#define PORTN_PIN8_GPIO 0 +#define PORTN_PIN8_SDR_A6 1 + +#define PORTN_PIN9_GPIO 0 +#define PORTN_PIN9_SDR_A5 1 + +#define PORTN_PIN10_GPIO 0 +#define PORTN_PIN10_SDR_A4 1 + +#define PORTN_PIN11_GPIO 0 +#define PORTN_PIN11_SDR_A3 1 + +#define PORTN_PIN12_GPIO 0 +#define PORTN_PIN12_SDR_A2 1 + +#define PORTN_PIN13_GPIO 0 +#define PORTN_PIN13_SDR_A1 1 + +#define PORTN_PIN14_GPIO 0 +#define PORTN_PIN14_SDR_A0 1 + +#define PORTN_PIN15_GPIO 0 +#define PORTN_PIN15_SDR_A10 1 + + +#endif //__SWM341_PORT_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_pwm.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_pwm.c new file mode 100644 index 0000000000..7e3ba8baff --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_pwm.c @@ -0,0 +1,539 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_pwm.c +* 功能说明: SWM341单片机的PWM功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_pwm.h" + + +/****************************************************************************************************************************************** +* 函数名称: PWM_Init() +* 功能说明: PWM初始化 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* PWM_InitStructure * initStruct 包含PWM相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_Init(PWM_TypeDef * PWMx, PWM_InitStructure * initStruct) +{ + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_PWM_Pos); + + PWMx->CR = (initStruct->Mode << PWM_CR_MODE_Pos) | + (1 << PWM_CR_MULT_Pos) | // 多次计数模式(即非单次) + (0 << PWM_CR_DIR_Pos) | // 向上计数 + (0 << PWM_CR_CLKSRC_Pos) | // 系统时钟 + ((initStruct->Clkdiv - 1) << PWM_CR_CLKDIV_Pos) | + (0 << PWM_CR_RPTNUM_Pos); // 每次计数器溢出都执行寄存器重加载 + + PWMx->OCR = ((initStruct->IdleLevelA ? 1 : 0) << PWM_OCR_IDLEA_Pos) | + ((initStruct->IdleLevelB ? 1 : 0) << PWM_OCR_IDLEB_Pos) | + ((initStruct->IdleLevelAN ? 1 : 0) << PWM_OCR_IDLEAN_Pos) | + ((initStruct->IdleLevelBN ? 1 : 0) << PWM_OCR_IDLEBN_Pos) | + ((initStruct->OutputInvA ? 1 : 0) << PWM_OCR_INVA_Pos) | + ((initStruct->OutputInvB ? 1 : 0) << PWM_OCR_INVB_Pos) | + ((initStruct->OutputInvAN ? 1 : 0) << PWM_OCR_INVAN_Pos) | + ((initStruct->OutputInvBN ? 1 : 0) << PWM_OCR_INVBN_Pos); + + PWMx->PERIOD = initStruct->Period - 1; + + PWMx->CMPA = initStruct->HdutyA; + PWMx->CMPA2 = initStruct->HdutyA2; + PWMx->DZA = initStruct->DeadzoneA; + + PWMx->CMPB = initStruct->HdutyB; + PWMx->CMPB2 = initStruct->HdutyB2; + PWMx->DZB = initStruct->DeadzoneB; + + PWMG->RELOADEN = 0x3F; + + PWMx->IF = 0x3F; + PWMx->IE = ((initStruct->UpOvfIE ? 1 : 0) << PWM_IE_UPOVF_Pos) | + ((initStruct->DownOvfIE ? 1 : 0) << PWM_IE_DNOVF_Pos) | + ((initStruct->UpCmpAIE ? 1 : 0) << PWM_IE_UPCMPA_Pos) | + ((initStruct->DownCmpAIE ? 1 : 0) << PWM_IE_DNCMPA_Pos) | + ((initStruct->UpCmpBIE ? 1 : 0) << PWM_IE_UPCMPB_Pos) | + ((initStruct->DownCmpBIE ? 1 : 0) << PWM_IE_DNCMPB_Pos); + + if(initStruct->UpOvfIE || initStruct->DownOvfIE || initStruct->UpCmpAIE || + initStruct->DownCmpAIE || initStruct->UpCmpBIE || initStruct->DownCmpBIE) + { + switch((uint32_t)PWMx) + { + case((uint32_t)PWM0): + NVIC_EnableIRQ(PWM0_IRQn); + break; + + case((uint32_t)PWM1): + NVIC_EnableIRQ(PWM1_IRQn); + break; + + case((uint32_t)PWM2): + NVIC_EnableIRQ(PWM2_IRQn); + break; + + case((uint32_t)PWM3): + NVIC_EnableIRQ(PWM3_IRQn); + break; + + case((uint32_t)PWM4): + NVIC_EnableIRQ(PWM4_IRQn); + break; + } + } +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_Start() +* 功能说明: 启动PWM,开始PWM输出 +* 输 入: uint32_t pwm PWM0_MSK、PWM1_MSK、PWM2_MSK、PWM3_MSK、PWM4_MSK、PWM5_MSK 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_Start(uint32_t pwm) +{ + PWMG->START |= pwm; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_Stop() +* 功能说明: 关闭PWM,停止PWM输出 +* 输 入: uint32_t pwm PWM0_MSK、PWM1_MSK、PWM2_MSK、PWM3_MSK、PWM4_MSK、PWM5_MSK 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_Stop(uint32_t pwm) +{ + PWMG->START &= ~pwm; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_Restart() +* 功能说明: 重启PWM,将PWM计数器清零,然后使用新的周期、高电平时长、死区时长设定值开始计数 +* 输 入: uint32_t pwm PWM0_MSK、PWM1_MSK、PWM2_MSK、PWM3_MSK、PWM4_MSK、PWM5_MSK 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_Restart(uint32_t pwm) +{ + PWMG->RESTART = (pwm << PWMG_RESTART_PWM0_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_ReloadEn() +* 功能说明: 只有当 Reload Enable 时,写入 PERIOD、CMPA、CMPB、DZA、DZB 等寄存器的值才会(在计数器溢出时)加载到内部工作寄存器 +* 输 入: uint32_t pwm PWM0_MSK、PWM1_MSK、PWM2_MSK、PWM3_MSK、PWM4_MSK、PWM5_MSK 及其“或” +* 输 出: 无 +* 注意事项: 如果需要保证在写 PERIOD、CMPA、CMPB、DZA、DZB 等寄存器过程中,这些寄存器的值不会被加载到内部工作寄存器,可以如下操作: +* 第一步、PWM_ReloadDis(PWM0_MSK | PWM1_MSK); +* 第二步、写 PERIOD、CMPA、CMPB、DZA、DZB 等寄存器 +* 第三步、PWM_ReloadEn(PWM0_MSK | PWM1_MSK); +******************************************************************************************************************************************/ +void PWM_ReloadEn(uint32_t pwm) +{ + PWMG->RELOADEN |= pwm; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_ReloadDis() +* 功能说明: 只有当 Reload Enable 时,写入 PERIOD、CMPA、CMPB、DZA、DZB 等寄存器的值才会(在计数器溢出时)加载到内部工作寄存器 +* 输 入: uint32_t pwm PWM0_MSK、PWM1_MSK、PWM2_MSK、PWM3_MSK、PWM4_MSK、PWM5_MSK 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_ReloadDis(uint32_t pwm) +{ + PWMG->RELOADEN &= ~pwm; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_BrkInPolarity() +* 功能说明: 设置刹车输入有效极性 +* 输 入: uint32_t brk PWM_BRK0、PWM_BRK1、PWM_BRK2 及其“或” +* uint32_t level 0 低电平刹车 1 高电平刹车 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_BrkInPolarity(uint32_t brk, uint32_t level) +{ + if(level) + PWMG->BRKPOL |= brk; + else + PWMG->BRKPOL &= ~brk; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_BrkConfig() +* 功能说明: 刹车配置 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* uint32_t brk 刹车输入,PWM_BRK0、PWM_BRK1、PWM_BRK2 及其“或” +* uint32_t out 刹车过程中PWMxA/PWMxB输出电平 +* uint32_t outN 刹车过程中PWMxAN/PWMxBN输出电平 +* uint32_t outHold 刹车信号撤销后,0 输出立即恢复 1 输出保持到计数器溢出再恢复 +* uint32_t stpCount 刹车状态下是否停止计数,1 停止计数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_BrkConfig(PWM_TypeDef * PWMx, uint32_t chn, uint32_t brk, uint32_t out, uint32_t outN, uint32_t outHold, uint32_t stpCount) +{ + if(chn == PWM_CH_A) + { + PWMx->BRKIN &= ~(0x7 << PWM_BRKIN_BRK0A_Pos); + PWMx->BRKIN |= (brk << PWM_BRKIN_BRK0A_Pos); + + PWMx->BRKCR &= ~(PWM_BRKCR_OUTA_Msk | PWM_BRKCR_OUTAN_Msk | PWM_BRKCR_OFFA_Msk); + PWMx->BRKCR |= (out << PWM_BRKCR_OUTA_Pos) | + (outN << PWM_BRKCR_OUTAN_Pos) | + (outHold << PWM_BRKCR_OFFA_Pos) | + (stpCount << PWM_BRKCR_STPCNT_Pos); + } + else + { + PWMx->BRKIN &= ~(0x7 << PWM_BRKIN_BRK0B_Pos); + PWMx->BRKIN |= (brk << PWM_BRKIN_BRK0B_Pos); + + PWMx->BRKCR &= ~(PWM_BRKCR_OUTB_Msk | PWM_BRKCR_OUTBN_Msk | PWM_BRKCR_OFFB_Msk); + PWMx->BRKCR |= (out << PWM_BRKCR_OUTB_Pos) | + (outN << PWM_BRKCR_OUTBN_Pos) | + (outHold << PWM_BRKCR_OFFB_Pos) | + (stpCount << PWM_BRKCR_STPCNT_Pos); + } +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_OvfTrigger() +* 功能说明: 计数器溢出时发出触发信号配置 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t en_up 向上计数时,计数器溢出是否发出触发信号 +* uint32_t en_down 向下计数时,计数器溢出是否发出触发信号 +* uint32_t trig_chn 触发信号有8个通道,选择此触发信号输出到哪个通道,取值PWM_TRG_0、PWM_TRG_1、...、PWM_TRG_7 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_OvfTrigger(PWM_TypeDef * PWMx, uint32_t en_up, uint32_t en_down, uint32_t trig_chn) +{ + PWMx->OVFTRG = (en_up << PWM_OVFTRG_UPEN_Pos) | + (en_down << PWM_OVFTRG_DNEN_Pos) | + (trig_chn << PWM_OVFTRG_MUX_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_CmpTrigger() +* 功能说明: 计数器等于指定数值时发出触发信号配置 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint16_t match 计数值等于match时发出触发信号 +* uint32_t dir PWM_DIR_UP 向上计数时计数器与match值比较 PWM_DIR_DOWN 向下计数时计数器与match值比较 +* uint32_t width 发出的触发信号的宽度,0 无输出 1 4个时钟周期 2 8个时钟周期 ... 63 252个时钟周期 +* uint32_t trig_chn 触发信号有8个通道,选择此触发信号输出到哪个通道,,取值PWM_TRG_0、PWM_TRG_1、...、PWM_TRG_7 +* uint32_t adc_trig_pos 在发出指定宽度触发信号的同时,还会在该触发信号宽度的 adc_trig_pos/8 位置处发出adc触发信号,取值0--7 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_CmpTrigger(PWM_TypeDef * PWMx, uint16_t match, uint32_t dir, uint32_t width, uint32_t trig_chn, uint32_t adc_trig_pos) +{ + PWMx->CMPTRG = (1 << PWM_CMPTRG_EN_Pos) | + (match << PWM_CMPTRG_CMP_Pos) | + (dir << PWM_CMPTRG_DIR_Pos) | + (width << PWM_CMPTRG_WIDTH_Pos) | + (trig_chn << PWM_CMPTRG_MUX_Pos); + + PWM0->CMPTRG &= ~PWM_CMPTRG_ATP_Msk; + PWM0->CMPTRG |= (adc_trig_pos << PWM_CMPTRG_ATP_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_OutMask() +* 功能说明: 输出屏蔽,当指定输入信号为高时,PWM输出固定电平 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* uint32_t evt PWMxY 由哪路 event 输入信号屏蔽,取值PWM_EVT_DIS、PWM_EVT_0、PWM_EVT_1、...、PWM_EVT_6 +* uint32_t out PWMxY 输出被屏蔽时输出什么电平 +* uint32_t evt_n PWMxYN由哪路 event 输入信号屏蔽,取值PWM_EVT_DIS、PWM_EVT_0、PWM_EVT_1、...、PWM_EVT_6 +* uint32_t out_n PWMxYN输出被屏蔽时输出什么电平 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_OutMask(PWM_TypeDef * PWMx, uint32_t chn, uint32_t evt, uint32_t out, uint32_t evt_n, uint32_t out_n) +{ + if(chn == PWM_CH_A) + { + PWMx->EVMUX &= ~(PWM_EVMUX_MASKA_Msk | PWM_EVMUX_MASKAN_Msk); + PWMx->EVMUX |= (evt << PWM_EVMUX_MASKA_Pos) | + (evt_n << PWM_EVMUX_MASKAN_Pos); + + PWMx->EVMSK &= ~(PWM_EVMSK_OUTA_Msk | PWM_EVMSK_OUTAN_Msk); + PWMx->EVMSK |= (out << PWM_EVMSK_OUTA_Pos) | + (out_n << PWM_EVMSK_OUTAN_Pos) | + (1 << PWM_EVMSK_IMME_Pos); + } + else + { + PWMx->EVMUX &= ~(PWM_EVMUX_MASKB_Msk | PWM_EVMUX_MASKBN_Msk); + PWMx->EVMUX |= (evt << PWM_EVMUX_MASKB_Pos) | + (evt_n << PWM_EVMUX_MASKBN_Pos); + + PWMx->EVMSK &= ~(PWM_EVMSK_OUTB_Msk | PWM_EVMSK_OUTBN_Msk); + PWMx->EVMSK |= (out << PWM_EVMSK_OUTB_Pos) | + (out_n << PWM_EVMSK_OUTBN_Pos) | + (1 << PWM_EVMSK_IMME_Pos); + } +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_SetPeriod() +* 功能说明: 设置周期 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint16_t period 要设定的周期值 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_SetPeriod(PWM_TypeDef * PWMx, uint16_t period) +{ + PWMx->PERIOD = period - 1; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_GetPeriod() +* 功能说明: 获取周期 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* 输 出: uint16_t 获取到的周期值 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint16_t PWM_GetPeriod(PWM_TypeDef * PWMx) +{ + return PWMx->PERIOD + 1; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_SetHDuty() +* 功能说明: 设置高电平时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* uint16_t hduty 要设定的高电平时长 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_SetHDuty(PWM_TypeDef * PWMx, uint32_t chn, uint16_t hduty) +{ + if(chn == PWM_CH_A) + PWMx->CMPA = hduty; + else + PWMx->CMPB = hduty; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_GetHDuty() +* 功能说明: 获取高电平时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* 输 出: uint16_t 获取到的高电平时长 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint16_t PWM_GetHDuty(PWM_TypeDef * PWMx, uint32_t chn) +{ + if(chn == PWM_CH_A) + return PWMx->CMPA; + else + return PWMx->CMPB; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_SetHDuty2() +* 功能说明: 设置高电平时长,用于非对称中心对齐模式 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* uint16_t hduty 要设定的前半周期高电平时长 +* uint16_t hduty2 要设定的后半周期高电平时长 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_SetHDuty2(PWM_TypeDef * PWMx, uint32_t chn, uint16_t hduty, uint16_t hduty2) +{ + if(chn == PWM_CH_A) + { + PWMx->CMPA = hduty; + PWMx->CMPA2 = hduty2; + } + else + { + PWMx->CMPB = hduty; + PWMx->CMPB2 = hduty2; + } +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_GetHDuty2() +* 功能说明: 获取高电平时长,用于非对称中心对齐模式 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* 输 出: uint16_t *hduty 获取到的前半周期高电平时长 +* uint16_t *hduty2 获取到的后半周期高电平时长 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_GetHDuty2(PWM_TypeDef * PWMx, uint32_t chn, uint16_t *hduty, uint16_t *hduty2) +{ + if(chn == PWM_CH_A) + { + *hduty = PWMx->CMPA; + *hduty2 = PWMx->CMPA2; + } + else + { + *hduty = PWMx->CMPB; + *hduty2 = PWMx->CMPB2; + } +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_SetDeadzone() +* 功能说明: 设置死区时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* uint16_t deadzone 要设定的死区时长,取值范围0--1023 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_SetDeadzone(PWM_TypeDef * PWMx, uint32_t chn, uint16_t deadzone) +{ + if(chn == PWM_CH_A) + PWMx->DZA = deadzone; + else + PWMx->DZB = deadzone; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_GetDeadzone() +* 功能说明: 获取死区时长 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t chn 指定要被设置的PWM通道,有效值包括PWM_CH_A、PWM_CH_B +* 输 出: uint16_t 获取到的死区时长 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint16_t PWM_GetDeadzone(PWM_TypeDef * PWMx, uint32_t chn) +{ + if(chn == PWM_CH_A) + return PWMx->DZA; + else + return PWMx->DZB; +} + + +/****************************************************************************************************************************************** +* 函数名称: PWM_IntEn() +* 功能说明: 中断使能 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t it interrupt type,有效值包括PWM_IT_OVF_UP、PWM_IT_OVF_DOWN、PWM_IT_CMPA_UP、PWM_IT_CMPB_UP、 +* PWM_IT_CMPA_DOWN、PWM_IT_CMPB_DOWN 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_IntEn(PWM_TypeDef * PWMx, uint32_t it) +{ + PWMx->IE |= it; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_IntDis() +* 功能说明: 中断禁能 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t it interrupt type,有效值包括PWM_IT_OVF_UP、PWM_IT_OVF_DOWN、PWM_IT_CMPA_UP、PWM_IT_CMPB_UP、 +* PWM_IT_CMPA_DOWN、PWM_IT_CMPB_DOWN 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_IntDis(PWM_TypeDef * PWMx, uint32_t it) +{ + PWMx->IE &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_IntClr() +* 功能说明:中断标志清除 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t it interrupt type,有效值包括PWM_IT_OVF_UP、PWM_IT_OVF_DOWN、PWM_IT_CMPA_UP、PWM_IT_CMPB_UP、 +* PWM_IT_CMPA_DOWN、PWM_IT_CMPB_DOWN 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_IntClr(PWM_TypeDef * PWMx, uint32_t it) +{ + PWMx->IF = it; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_IntStat() +* 功能说明: 中断标志查询 +* 输 入: PWM_TypeDef * PWMx 指定要被设置的PWM,有效值包括PWM0、PWM1、PWM2、PWM3、PWM4 +* uint32_t it interrupt type,有效值包括PWM_IT_OVF_UP、PWM_IT_OVF_DOWN、PWM_IT_CMPA_UP、PWM_IT_CMPB_UP、 +* PWM_IT_CMPA_DOWN、PWM_IT_CMPB_DOWN 及其“或” +* 输 出: uint32_t 0 中断标志未置起 非0 中断标志已置起 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t PWM_IntStat(PWM_TypeDef * PWMx, uint32_t it) +{ + return (PWMx->IF & it); +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_BrkIntEn() +* 功能说明: 刹车中断使能 +* 输 入: uint32_t brkit brake interrupt type,有效值包括 PWM_BRKIT_BRK0、PWM_BRKIT_BRK0、PWM_BRKIT_BRK0 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_BrkIntEn(uint32_t brkit) +{ + PWMG->BRKIE |= brkit; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_BrkIntDis() +* 功能说明: 刹车中断禁能 +* 输 入: uint32_t brkit brake interrupt type,有效值包括 PWM_BRKIT_BRK0、PWM_BRKIT_BRK0、PWM_BRKIT_BRK0 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_BrkIntDis(uint32_t brkit) +{ + PWMG->BRKIE &= ~brkit; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_BrkIntClr() +* 功能说明:中断标志清除 +* 输 入: uint32_t brkit brake interrupt type,有效值包括 PWM_BRKIT_BRK0、PWM_BRKIT_BRK0、PWM_BRKIT_BRK0 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PWM_BrkIntClr(uint32_t brkit) +{ + PWMG->BRKIF = brkit; +} + +/****************************************************************************************************************************************** +* 函数名称: PWM_BrkIntStat() +* 功能说明: 刹车中断标志查询 +* 输 入: uint32_t brkit brake interrupt type,有效值包括 PWM_BRKIT_BRK0、PWM_BRKIT_BRK0、PWM_BRKIT_BRK0 及其“或” +* 输 出: uint32_t 0 中断标志未置起 非0 中断标志已置起 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t PWM_BrkIntStat(uint32_t brkit) +{ + return (PWMG->BRKIF & brkit); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_pwm.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_pwm.h new file mode 100644 index 0000000000..49736f26b4 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_pwm.h @@ -0,0 +1,125 @@ +#ifndef __SWM341_PWM_H__ +#define __SWM341_PWM_H__ + + +typedef struct { + uint8_t Mode; //PWM_EDGE_ALIGNED、PWM_CENTER_ALIGNED、PWM_ASYM_CENTER_ALIGNED + + uint16_t Clkdiv; //1--1024 + + uint16_t Period; //周期 + + uint16_t HdutyA; //占空比,高电平时长;PWM_ASYM_CENTER_ALIGNED 模式下设定前半周期的高电平时长 + uint16_t HdutyA2; //只在 PWM_ASYM_CENTER_ALIGNED 模式下使用,用于设定后半周期的高电平时长 + uint16_t DeadzoneA; //死区时长,取值0--1023 + uint8_t IdleLevelA; //停止状态下PWMxA输出电平 + uint8_t IdleLevelAN; //停止状态下PWMxAN输出电平 + uint8_t OutputInvA; //PWMxA输出取反 + uint8_t OutputInvAN; //PWMxAN输出取反 + + uint16_t HdutyB; + uint16_t HdutyB2; + uint16_t DeadzoneB; + uint8_t IdleLevelB; + uint8_t IdleLevelBN; + uint8_t OutputInvB; + uint8_t OutputInvBN; + + uint8_t UpOvfIE; //上升沿计数器溢出中断使能,PWM_EDGE_ALIGNED 模式下向上计数,因此只有上升沿 + uint8_t DownOvfIE; //下降沿计数器溢出中断使能,另外两种模式下先向上计数、后向下计数,上升沿是前半周期、下降沿是后半周期 + uint8_t UpCmpAIE; //上升沿比较器A匹配中断使能 + uint8_t DownCmpAIE; //下降沿比较器A匹配中断使能 + uint8_t UpCmpBIE; //上升沿比较器B匹配中断使能 + uint8_t DownCmpBIE; //下降沿比较器B匹配中断使能 +} PWM_InitStructure; + + +#define PWM_EDGE_ALIGNED 0 +#define PWM_CENTER_ALIGNED 1 +#define PWM_ASYM_CENTER_ALIGNED 2 // 非对称中心对齐模式,上升沿和下降沿具有不同的翻转点比较值 + + +#define PWM_CH_A 0 +#define PWM_CH_B 1 + +#define PWM0_MSK (1 << 0) +#define PWM1_MSK (1 << 1) +#define PWM2_MSK (1 << 2) +#define PWM3_MSK (1 << 3) +#define PWM4_MSK (1 << 4) + +#define PWM_BRK0 (1 << 0) +#define PWM_BRK1 (1 << 1) +#define PWM_BRK2 (1 << 2) + +#define PWM_DIR_UP 0 +#define PWM_DIR_DOWN 1 + +#define PWM_TRG_0 0 //计数器溢出或与指定值相等时 PWM 输出触发信号 +#define PWM_TRG_1 1 +#define PWM_TRG_2 2 +#define PWM_TRG_3 3 +#define PWM_TRG_4 4 +#define PWM_TRG_5 5 +#define PWM_TRG_6 6 +#define PWM_TRG_7 7 + +#define PWM_EVT_DIS 0 //外部事件信号为高时 PWM 启动计数、停止计数、暂停计数、屏蔽输出 +#define PWM_EVT_0 1 +#define PWM_EVT_1 2 +#define PWM_EVT_2 3 +#define PWM_EVT_3 4 +#define PWM_EVT_4 5 +#define PWM_EVT_TIMR0 6 +#define PWM_EVT_TIMR1 7 + +/* Interrupt Type */ +#define PWM_IT_OVF_UP (1 << 0) //向上计数时计数器溢出,PWM_EDGE_ALIGNED 模式下向上计数,因此只有上升沿 +#define PWM_IT_OVF_DOWN (1 << 1) //向下计数时计数器溢出,另外两种模式下先向上计数、后向下计数,上升沿是前半周期、下降沿是后半周期 +#define PWM_IT_CMPA_UP (1 << 2) //向上计数时计数器值与CMPA相等 +#define PWM_IT_CMPB_UP (1 << 3) //向上计数时计数器值与CMPB相等 +#define PWM_IT_CMPA_DOWN (1 << 4) //向下计数时计数器值与CMPA相等 +#define PWM_IT_CMPB_DOWN (1 << 5) //向下计数时计数器值与CMPB相等 + +#define PWM_BRKIT_BRK0 (1 << 0) //PWM_BRK0引脚上出现刹车信号 +#define PWM_BRKIT_BRK1 (1 << 1) +#define PWM_BRKIT_BRK2 (1 << 2) + + + +void PWM_Init(PWM_TypeDef * PWMx, PWM_InitStructure * initStruct); //PWM初始化 +void PWM_Start(uint32_t pwm); //启动PWM,开始PWM输出 +void PWM_Stop(uint32_t pwm); //关闭PWM,停止PWM输出 +void PWM_Restart(uint32_t pwm); + +void PWM_ReloadEn(uint32_t pwm); +void PWM_ReloadDis(uint32_t pwm); + +void PWM_BrkInPolarity(uint32_t brk, uint32_t level); +void PWM_BrkConfig(PWM_TypeDef * PWMx, uint32_t chn, uint32_t brk, uint32_t out, uint32_t outN, uint32_t outHold, uint32_t stpCount); + +void PWM_OvfTrigger(PWM_TypeDef * PWMx, uint32_t en_up, uint32_t en_down, uint32_t trig_chn); +void PWM_CmpTrigger(PWM_TypeDef * PWMx, uint16_t match, uint32_t dir, uint32_t width, uint32_t trig_chn, uint32_t adc_trig_pos); + +void PWM_OutMask(PWM_TypeDef * PWMx, uint32_t chn, uint32_t evt, uint32_t out, uint32_t evt_n, uint32_t out_n); + +void PWM_SetPeriod(PWM_TypeDef * PWMx, uint16_t period); //设置周期 +uint16_t PWM_GetPeriod(PWM_TypeDef * PWMx); //获取周期 +void PWM_SetHDuty(PWM_TypeDef * PWMx, uint32_t chn, uint16_t hduty); //设置高电平时长 +uint16_t PWM_GetHDuty(PWM_TypeDef * PWMx, uint32_t chn); //获取高电平时长 +void PWM_SetHDuty2(PWM_TypeDef * PWMx, uint32_t chn, uint16_t hduty, uint16_t hduty2); //设置高电平时长,用于非对称中心对齐模式 +void PWM_GetHDuty2(PWM_TypeDef * PWMx, uint32_t chn, uint16_t *hduty, uint16_t *hduty2); //获取高电平时长,用于非对称中心对齐模式 +void PWM_SetDeadzone(PWM_TypeDef * PWMx, uint32_t chn, uint16_t deadzone); //设置死区时长 +uint16_t PWM_GetDeadzone(PWM_TypeDef * PWMx, uint32_t chn); //获取死区时长 + +void PWM_IntEn(PWM_TypeDef * PWMx, uint32_t it); //中断使能 +void PWM_IntDis(PWM_TypeDef * PWMx, uint32_t it); //中断禁能 +void PWM_IntClr(PWM_TypeDef * PWMx, uint32_t it); //中断标志清除 +uint32_t PWM_IntStat(PWM_TypeDef * PWMx, uint32_t it); //中断标志查询 +void PWM_BrkIntEn(uint32_t brkit); //刹车中断使能 +void PWM_BrkIntDis(uint32_t brkit); //刹车中断禁能 +void PWM_BrkIntClr(uint32_t brkit); //刹车中断标志清除 +uint32_t PWM_BrkIntStat(uint32_t brkit); //刹车中断标志查询 + + +#endif //__SWM341_PWM_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_qei.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_qei.c new file mode 100644 index 0000000000..c2f397b7ff --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_qei.c @@ -0,0 +1,146 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_qei.c +* 功能说明: SWM341单片机的正交编码器接口QEI功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2013年06月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_qei.h" + + +/****************************************************************************************************************************************** +* 函数名称: QEI_Init() +* 功能说明: 正交编码器接口QEI初始化 +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* QEI_InitStructure * initStruct 包含正交编码器接口相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void QEI_Init(QEI_TypeDef * QEIx,QEI_InitStructure * initStruct) +{ + switch((uint32_t)QEIx) + { + case ((uint32_t)QEI): + SYS->CLKEN1 |= (1 << SYS_CLKEN1_QEI_Pos); + break; + } + + QEI_Stop(QEIx); //配置前关闭QEI模块 + + QEIx->CR = (initStruct->swapAB << QEI_CR_ABSWAP_Pos) | + (initStruct->mode << QEI_CR_X2X4_Pos) | + (1 << QEI_CR_RSTSRC_Pos) | + (1 << QEI_CR_MODE_Pos); + + QEIx->POSCNT = 0; + QEIx->MAXCNT = initStruct->maxcnt; + + QEIx->IC = 0x0F; + QEIx->IE = 0x0F; + QEIx->IM = (initStruct->intINDEXEn << QEI_IM_INDEX_Pos) | + (initStruct->intMATCHEn << QEI_IM_MATCH_Pos) | + (initStruct->intCNTOVEn << QEI_IM_CNTOV_Pos) | + (initStruct->intERROREn << QEI_IM_ERROR_Pos); + + if(initStruct->intINDEXEn | initStruct->intMATCHEn | initStruct->intCNTOVEn | initStruct->intERROREn) + { + NVIC_EnableIRQ(QEI_IRQn); + } +} + +/****************************************************************************************************************************************** +* 函数名称: QEI_Start() +* 功能说明: 启动指定QEI +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void QEI_Start(QEI_TypeDef * QEIx) +{ + QEIx->CR |= (1 << QEI_CR_ENA_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: QEI_Stop() +* 功能说明: 关闭指定QEI +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void QEI_Stop(QEI_TypeDef * QEIx) +{ + QEIx->CR &= ~(1 << QEI_CR_ENA_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: QEI_IntEn() +* 功能说明: QEI中断使能 +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* uint32_t it interrupt type,取值QEI_INT_INDEX、QEI_INT_MATCH、QEI_INT_CNTOV、QEI_INT_ERROR 及其或 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void QEI_IntEn(QEI_TypeDef * QEIx, uint32_t it) +{ + QEIx->IM |= it; + + switch((uint32_t)QEIx) + { + case ((uint32_t)QEI): + NVIC_EnableIRQ(QEI_IRQn); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: QEI_IntDis() +* 功能说明: QEI中断关闭 +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* uint32_t it interrupt type,取值QEI_INT_INDEX、QEI_INT_MATCH、QEI_INT_CNTOV、QEI_INT_ERROR 及其或 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void QEI_IntDis(QEI_TypeDef * QEIx, uint32_t it) +{ + QEIx->IM &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: QEI_IntClr() +* 功能说明: QEI中断标志清除 +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* uint32_t it interrupt type,取值QEI_INT_INDEX、QEI_INT_MATCH、QEI_INT_CNTOV、QEI_INT_ERROR 及其或 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void QEI_IntClr(QEI_TypeDef * QEIx, uint32_t it) +{ + QEIx->IC = it; +} + +/****************************************************************************************************************************************** +* 函数名称: QEI_IntStat() +* 功能说明: QEI中断状态查询 +* 输 入: QEI_TypeDef * QEIx 指定要被设置的正交编码器接口,有效值包括QEI +* uint32_t it interrupt type,取值QEI_INT_INDEX、QEI_INT_MATCH、QEI_INT_CNTOV、QEI_INT_ERROR 及其或 +* 输 出: uint32_t 0 没有中断发生 非0值 有中断发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t QEI_IntStat(QEI_TypeDef * QEIx, uint32_t it) +{ + return (QEIx->IF & it); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_qei.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_qei.h new file mode 100644 index 0000000000..5ba68374d7 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_qei.h @@ -0,0 +1,37 @@ +#ifndef __SWM341_QEI_H__ +#define __SWM341_QEI_H__ + +typedef struct { + uint8_t mode; //QEI_MODE_X2、QEI_MODE_X4 + uint16_t maxcnt; //最大计数值 + uint8_t swapAB; //1 交换A、B引脚 + uint8_t intINDEXEn; //检测到Index脉冲中断使能 + uint8_t intMATCHEn; //POSCNT递增到与MAXCNT相等,或POSCNT从MAXCNT递减到0中断使能 + uint8_t intCNTOVEn; //Counter Overrun,计数器溢出中断使能 + uint8_t intERROREn; //计数器错误中断使能 +} QEI_InitStructure; + + +#define QEI_MODE_X2 0 +#define QEI_MODE_X4 1 + +#define QEI_INT_INDEX (1 << 0) +#define QEI_INT_MATCH (1 << 1) +#define QEI_INT_CNTOV (1 << 2) +#define QEI_INT_ERROR (1 << 3) + + +void QEI_Init(QEI_TypeDef * QEIx, QEI_InitStructure * initStruct); //QEI初始化 +void QEI_Start(QEI_TypeDef * QEIx); //启动QEI +void QEI_Stop(QEI_TypeDef * QEIx); //关闭QEI + +uint32_t QEI_IndexLvl(QEI_TypeDef * QEIx); //QEI Index引脚电平 +uint32_t QEI_CountDir(QEI_TypeDef * QEIx); //QEI计数方向,0 反向计数 1 正向计数 + +void QEI_IntEn(QEI_TypeDef * QEIx, uint32_t it); //QEI中断使能 +void QEI_IntDis(QEI_TypeDef * QEIx, uint32_t it); //QEI中断关闭 +void QEI_IntClr(QEI_TypeDef * QEIx, uint32_t it); //QEI中断标志清除 +uint32_t QEI_IntStat(QEI_TypeDef * QEIx, uint32_t it); //QEI中断状态查询 + + +#endif //__SWM341_QEI_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_rtc.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_rtc.c new file mode 100644 index 0000000000..121ec60730 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_rtc.c @@ -0,0 +1,241 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_rtc.c +* 功能说明: SWM341单片机的RTC驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_rtc.h" + + +static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date); +/****************************************************************************************************************************************** +* 函数名称: RTC_Init() +* 功能说明: RTC初始化 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,有效值包括RTC +* RTC_InitStructure * initStruct 包含RTC相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_Init(RTC_TypeDef * RTCx, RTC_InitStructure * initStruct) +{ + if(initStruct->clksrc == RTC_CLKSRC_XTAL32K) + { + SYS->XTALCR |= (1 << SYS_XTALCR_32KON_Pos) | (7 << SYS_XTALCR_32KDRV_Pos); + } + else + { + SYS->LRCCR = (1 << SYS_LRCCR_ON_Pos); + } + SYS->CLKSEL &= ~SYS_CLKSEL_RTC_Msk; + SYS->CLKSEL |= (initStruct->clksrc << SYS_CLKSEL_RTC_Pos); + + SYS->CLKEN1 |= (1 << SYS_CLKEN1_RTC_Pos); + + RTC_Stop(RTCx); + + while(RTCx->CFGABLE == 0); + + RTCx->MINSEC = (initStruct->Second << RTC_MINSEC_SEC_Pos) | + (initStruct->Minute << RTC_MINSEC_MIN_Pos); + + RTCx->DATHUR = (initStruct->Hour << RTC_DATHUR_HOUR_Pos) | + (initStruct->Date << RTC_DATHUR_DATE_Pos); + + RTCx->MONDAY = (calcWeekDay(initStruct->Year, initStruct->Month, initStruct->Date) << RTC_MONDAY_DAY_Pos) | + (initStruct->Month << RTC_MONDAY_MON_Pos); + + RTCx->YEAR = initStruct->Year; + + RTCx->LOAD = (1 << RTC_LOAD_TIME_Pos); + + RTCx->IF = 0x1F; + RTCx->IE = (initStruct->SecondIEn << RTC_IE_SEC_Pos) | + (initStruct->MinuteIEn << RTC_IE_MIN_Pos); + + if(initStruct->SecondIEn | initStruct->MinuteIEn) + { + NVIC_EnableIRQ(RTC_IRQn); + } + else + { + NVIC_DisableIRQ(RTC_IRQn); + } +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_Start() +* 功能说明: 启动RTC +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,可取值包括RTC +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_Start(RTC_TypeDef * RTCx) +{ + RTCx->EN = 1; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_Stop() +* 功能说明: 停止RTC +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,可取值包括RTC +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_Stop(RTC_TypeDef * RTCx) +{ + RTCx->EN = 0; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_GetDateTime() +* 功能说明: 获取当前的时间和日期 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,有效值包括RTC +* RTC_DateTime * dateTime 获取到的时间、日期值存入此指针指向的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_GetDateTime(RTC_TypeDef * RTCx, RTC_DateTime * dateTime) +{ + dateTime->Year = RTCx->YEAR; + dateTime->Month = (RTCx->MONDAY & RTC_MONDAY_MON_Msk) >> RTC_MONDAY_MON_Pos; + dateTime->Date = (RTCx->DATHUR & RTC_DATHUR_DATE_Msk) >> RTC_DATHUR_DATE_Pos; + dateTime->Day = 1 << ((RTCx->MONDAY & RTC_MONDAY_DAY_Msk) >> RTC_MONDAY_DAY_Pos); + dateTime->Hour = (RTCx->DATHUR & RTC_DATHUR_HOUR_Msk) >> RTC_DATHUR_HOUR_Pos; + dateTime->Minute = (RTCx->MINSEC & RTC_MINSEC_MIN_Msk) >> RTC_MINSEC_MIN_Pos; + dateTime->Second = (RTCx->MINSEC & RTC_MINSEC_SEC_Msk) >> RTC_MINSEC_SEC_Pos; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_AlarmSetup() +* 功能说明: RTC闹钟设定 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,有效值包括RTC +* RTC_AlarmStructure * alarmStruct 包含RTC闹钟设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_AlarmSetup(RTC_TypeDef * RTCx, RTC_AlarmStructure * alarmStruct) +{ + while(RTCx->CFGABLE == 0); + + RTCx->MINSECAL = (alarmStruct->Second << RTC_MINSECAL_SEC_Pos) | + (alarmStruct->Minute << RTC_MINSECAL_MIN_Pos); + + RTCx->DAYHURAL = (alarmStruct->Hour << RTC_DAYHURAL_HOUR_Pos) | + (alarmStruct->Days << RTC_DAYHURAL_SUN_Pos); + + RTCx->LOAD = (1 << RTC_LOAD_TIME_Pos) | (1 << RTC_LOAD_ALARM_Pos); + + RTCx->IF = (1 << RTC_IF_ALARM_Pos); + RTCx->IE &= ~RTC_IE_ALARM_Msk; + RTCx->IE |= (alarmStruct->AlarmIEn << RTC_IE_ALARM_Pos); + + if(alarmStruct->AlarmIEn) + { + NVIC_EnableIRQ(RTC_IRQn); + } + else + { + NVIC_DisableIRQ(RTC_IRQn); + } +} + +/****************************************************************************************************************************************** +* 函数名称: calcWeekDay() +* 功能说明: 计算指定年、月、日是星期几 +* 输 入: uint32_t year 年 +* uint32_t month 月 +* uint32_t date 日 +* 输 出: uint32_t 0 星期日 1 星期一 ... ... 6 星期六 +* 注意事项: 无 +******************************************************************************************************************************************/ +static uint32_t calcWeekDay(uint32_t year, uint32_t month, uint32_t date) +{ + uint32_t i, cnt = 0; + const uint32_t daysOfMonth[13] = {0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; + + for(i = 1; i < month; i++) cnt += daysOfMonth[i]; + + cnt += date; + + if((year%4 == 0) && ((year%100 != 0) || (year%400 == 0)) && (month >= 3)) cnt += 1; + + cnt += (year - 1901) * 365; + + for(i = 1901; i < year; i++) + { + if((i%4 == 0) && ((i%100 != 0) || (i%400 == 0))) cnt += 1; + } + + return (cnt+1) % 7; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_INTEn() +* 功能说明: 中断使能 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,可取值包括RTC +* uint32_t it interrupt type,有效值RTC_IT_SECOND、RTC_IT_MINUTE、RTC_IT_HOUR、RTC_IT_DATE、RTC_IT_ALARM、 +* RTC_IT_SECOND_DIV2、RTC_IT_SECOND_DIV4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_INTEn(RTC_TypeDef * RTCx, uint32_t it) +{ + RTCx->IE |= it; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_INTDis() +* 功能说明: 中断禁止 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,可取值包括RTC +* uint32_t it interrupt type,有效值RTC_IT_SECOND、RTC_IT_MINUTE、RTC_IT_HOUR、RTC_IT_DATE、RTC_IT_ALARM、 +* RTC_IT_SECOND_DIV2、RTC_IT_SECOND_DIV4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_INTDis(RTC_TypeDef * RTCx, uint32_t it) +{ + RTCx->IE &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_INTClr() +* 功能说明: 中断标志清除 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,可取值包括RTC +* uint32_t it interrupt type,有效值RTC_IT_SECOND、RTC_IT_MINUTE、RTC_IT_HOUR、RTC_IT_DATE、RTC_IT_ALARM、 +* RTC_IT_SECOND_DIV2、RTC_IT_SECOND_DIV4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void RTC_INTClr(RTC_TypeDef * RTCx, uint32_t it) +{ + RTCx->IF = it; +} + +/****************************************************************************************************************************************** +* 函数名称: RTC_INTStat() +* 功能说明: 中断状态 +* 输 入: RTC_TypeDef * RTCx 指定要被设置的RTC,可取值包括RTC +* uint32_t it interrupt type,有效值RTC_IT_SECOND、RTC_IT_MINUTE、RTC_IT_HOUR、RTC_IT_DATE、RTC_IT_ALARM、 +* RTC_IT_SECOND_DIV2、RTC_IT_SECOND_DIV4 +* 输 出: uint32_t 1 秒中断发生 0 秒中断未发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t RTC_INTStat(RTC_TypeDef * RTCx, uint32_t it) +{ + return (RTCx->IF & it) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_rtc.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_rtc.h new file mode 100644 index 0000000000..6a6dbf7f1a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_rtc.h @@ -0,0 +1,73 @@ +#ifndef __SWM341_RTC_H__ +#define __SWM341_RTC_H__ + + +#define RTC_CLKSRC_LRC32K 0 +#define RTC_CLKSRC_XTAL32K 1 + +#define RTC_SUN 0x01 +#define RTC_MON 0x02 +#define RTC_TUE 0x04 +#define RTC_WED 0x08 +#define RTC_THU 0x10 +#define RTC_FRI 0x20 +#define RTC_SAT 0x40 + + +typedef struct { + uint8_t clksrc; //RTC_CLKSRC_RC32K、RTC_CLKSRC_XTAL32K + uint16_t Year; + uint8_t Month; //取值1--12 + uint8_t Date; //取值1--31 + uint8_t Hour; //取值0--23 + uint8_t Minute; //取值0--59 + uint8_t Second; //取值0--59 + uint8_t SecondIEn; + uint8_t MinuteIEn; +} RTC_InitStructure; + +typedef struct { + uint8_t Days; //RTC_SUN、RTC_MON、RTC_TUE、RTC_WED、RTC_THU、RTC_FRI、RTC_SAT及其或运算组合 + uint8_t Hour; + uint8_t Minute; + uint8_t Second; + uint8_t AlarmIEn; +} RTC_AlarmStructure; + +typedef struct { + uint16_t Year; + uint8_t Month; + uint8_t Date; + uint8_t Day; //RTC_SUN、RTC_MON、RTC_TUE、RTC_WED、RTC_THU、RTC_FRI、RTC_SAT + uint8_t Hour; + uint8_t Minute; + uint8_t Second; +} RTC_DateTime; + + +/* Interrupt Type */ +#define RTC_IT_SECOND (1 << 0) //Second Interrupt +#define RTC_IT_MINUTE (1 << 1) +#define RTC_IT_HOUR (1 << 2) +#define RTC_IT_DATE (1 << 3) +#define RTC_IT_ALARM (1 << 4) +#define RTC_IT_SECOND_DIV2 (1 << 6) //1/2 Second Interrupt +#define RTC_IT_SECOND_DIV4 (1 << 7) //1/4 Second Interrupt + + + +void RTC_Init(RTC_TypeDef * RTCx, RTC_InitStructure * initStruct); +void RTC_Start(RTC_TypeDef * RTCx); +void RTC_Stop(RTC_TypeDef * RTCx); + +void RTC_GetDateTime(RTC_TypeDef * RTCx, RTC_DateTime * dateTime); + +void RTC_AlarmSetup(RTC_TypeDef * RTCx, RTC_AlarmStructure * alarmStruct); + + +void RTC_INTEn(RTC_TypeDef * RTCx, uint32_t it); +void RTC_INTDis(RTC_TypeDef * RTCx, uint32_t it); +void RTC_INTClr(RTC_TypeDef * RTCx, uint32_t it); +uint32_t RTC_INTStat(RTC_TypeDef * RTCx, uint32_t it); + +#endif //__SWM341_RTC_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.c new file mode 100644 index 0000000000..a8962e1645 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.c @@ -0,0 +1,877 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_sdio.c +* 功能说明: SWM341单片机的SDIO接口驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: 为了通用性、兼容性、易用性,只支持以512字节为单位的读写 +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_sdio.h" + + +SD_CardInfo SD_cardInfo; + +/****************************************************************************************************************************************** +* 函数名称: SDIO_Init() +* 功能说明: SDIO读写SD卡初始化,初始化成高速4线模式、读写以512字节大小进行 +* 输 入: uint32_t freq SDIO_CLK时钟频率 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_Init(uint32_t freq) +{ + uint32_t res; + uint32_t resp, resps[4]; + + SYS->CLKSEL &= ~SYS_CLKSEL_SDIO_Msk; + if(SystemCoreClock > 80000000) //SDIO时钟需要小于52MHz + SYS->CLKSEL |= (2 << SYS_CLKSEL_SDIO_Pos); //SDCLK = SYSCLK / 4 + else + SYS->CLKSEL |= (0 << SYS_CLKSEL_SDIO_Pos); //SDCLK = SYSCLK / 2 + + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_SDIO_Pos); + + SDIO->CR2 = (1 << SDIO_CR2_RSTALL_Pos); + + SDIO->CR1 = (1 << SDIO_CR1_CDSRC_Pos) | + (0 << SDIO_CR1_8BIT_Pos) | + (0 << SDIO_CR1_4BIT_Pos) | + (1 << SDIO_CR1_PWRON_Pos) | + (7 << SDIO_CR1_VOLT_Pos); + + SDIO->CR2 = (1 << SDIO_CR2_CLKEN_Pos) | + (1 << SDIO_CR2_SDCLKEN_Pos) | + (calcSDCLKDiv(100000) << SDIO_CR2_SDCLKDIV_Pos) | + (0xC << SDIO_CR2_TIMEOUT_Pos); // 2**25 SDIO_CLK + + while((SDIO->CR2 & SDIO_CR2_CLKRDY_Msk) == 0); + + for(int i = 0; i < CyclesPerUs * 10; i++) __NOP(); + + SDIO->IM = 0xFFFFFFFF; + + + SDIO_SendCmd(SD_CMD_GO_IDLE_STATE, 0x00, SD_RESP_NO, 0); //CMD0: GO_IDLE_STATE + + res = SDIO_SendCmd(SD_CMD_SEND_IF_COND, 0x1AA, SD_RESP_32b, &resp); //CMD8: SEND_IF_COND, 检测工作电压、检测是否支持SD 2.0 + if(res != SD_RES_OK) + return res; + + if(resp == 0x1AA) SD_cardInfo.CardType = SDIO_STD_CAPACITY_SD_CARD_V2_0; + else SD_cardInfo.CardType = SDIO_STD_CAPACITY_SD_CARD_V1_1; + + do //ACMD41: SD_CMD_SD_APP_OP_COND + { + res = SDIO_SendCmd(SD_CMD_APP_CMD, 0x00, SD_RESP_32b, &resp); + if(res != SD_RES_OK) + return res; + + if((resp & SD_CS_APP_CMD) == 0) return SD_RES_ERR; + + if(SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0) + SDIO_SendCmd(SD_CMD_SD_APP_OP_COND, 0x80100000|0x40000000, SD_RESP_32b, &resp); + else + SDIO_SendCmd(SD_CMD_SD_APP_OP_COND, 0x80100000|0x00000000, SD_RESP_32b, &resp); + } while(((resp >> 31) & 0x01) == 0); //上电没完成时resp[31] == 0 + + if(((resp >> 30) & 0x01) == 1) SD_cardInfo.CardType = SDIO_HIGH_CAPACITY_SD_CARD; + + + SDIO_SendCmd(SD_CMD_ALL_SEND_CID, 0x00, SD_RESP_128b, resps); //CMD2: SD_CMD_ALL_SEND_CID,获取CID + + parseCID(resps); + + + SDIO_SendCmd(SD_CMD_SET_REL_ADDR, 0x00, SD_RESP_32b, &resp); //CMD3: SD_CMD_SET_REL_ADDR,设置RCA + + SD_cardInfo.RCA = resp >> 16; + + + SDIO_SendCmd(SD_CMD_SEND_CSD, SD_cardInfo.RCA << 16, SD_RESP_128b, resps); //CMD9: SD_CMD_SEND_CSD,获取CSD + + parseCSD(resps); + + if(SD_cardInfo.CardBlockSize < 0x200) return SD_RES_ERR; //本驱动只支持以512字节为单位的读写,所以最大读写单位必须不小于512 + + + SDIO->CR2 &= ~(SDIO_CR2_SDCLKEN_Msk | SDIO_CR2_SDCLKDIV_Msk); + SDIO->CR2 |= (1 << SDIO_CR2_SDCLKEN_Pos) | + (calcSDCLKDiv(freq) << SDIO_CR2_SDCLKDIV_Pos); //初始化完成,SDCLK切换到高速 + + + SDIO_SendCmd(SD_CMD_SEL_DESEL_CARD, SD_cardInfo.RCA << 16, SD_RESP_32b_busy, &resp); //CMD7: 选中卡,从Standy模式进入Transfer模式 + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + SDIO_SendCmd(SD_CMD_APP_CMD, SD_cardInfo.RCA << 16, SD_RESP_32b, &resp); + + SDIO_SendCmd(SD_CMD_APP_SD_SET_BUSWIDTH, SD_BUSWIDTH_4b, SD_RESP_32b, &resp); //切换成4位总线模式 + + SDIO->CR1 |= (1 << SDIO_CR1_4BIT_Pos); + + + SDIO_SendCmd(SD_CMD_SET_BLOCKLEN, 512, SD_RESP_32b, &resp); //固定块大小位512字节 + + SD_cardInfo.CardBlockSize = 512; + + SDIO->BLK = 512; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: SDIO_BlockWrite() +* 功能说明: 向SD卡写入数据 +* 输 入: uint32_t block_addr SD卡块地址,每块512字节 +* uint32_t buff[] 要写入的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[]) +{ + uint32_t res, i; + uint32_t addr, resp; + + if(SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr; + else addr = block_addr * 512; + + res = SDIO_SendCmdWithData(SD_CMD_WRITE_SINGLE_BLOCK, addr, SD_RESP_32b, &resp, 0, 1); + if(res != SD_RES_OK) + return res; + + while((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFWRRDY_Msk; + + for(i = 0; i < 512/4; i++) SDIO->DATA = buff[i]; + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: SDIO_MultiBlockWrite() +* 功能说明: 向SD卡写入多块数据 +* 输 入: uint32_t block_addr SD卡块地址,每块512字节 +* uint16_t block_cnt 要写入的块数 +* uint32_t buff[] 要写入的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_MultiBlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) +{ + uint32_t res, i, j; + uint32_t addr, resp; + + if(SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr; + else addr = block_addr * 512; + + res = SDIO_SendCmdWithData(SD_CMD_WRITE_MULT_BLOCK, addr, SD_RESP_32b, &resp, 0, block_cnt); + if(res != SD_RES_OK) + return res; + + for(i = 0; i < block_cnt; i++) + { + while((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFWRRDY_Msk; + + for(j = 0; j < 512/4; j++) SDIO->DATA = buff[i*(512/4) + j]; + } + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: SDIO_DMABlockWrite() +* 功能说明: 通过DMA向SD卡写入多块数据 +* 输 入: uint32_t block_addr SD卡块地址,每块512字节 +* uint16_t block_cnt 要写入的块数 +* uint32_t buff[] 要写入的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_DMABlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) +{ + uint32_t res; + uint32_t addr, resp; + + if(SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr; + else addr = block_addr * 512; + + SDIO->DMA_MEM_ADDR = (uint32_t) buff; + + res = SDIO_SendCmdWithDataByDMA(SD_CMD_WRITE_MULT_BLOCK, addr, SD_RESP_32b, &resp, 0, block_cnt); + if(res != SD_RES_OK) + return res; + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: SDIO_BlockRead() +* 功能说明: 从SD卡读出数据 +* 输 入: uint32_t block_addr SD卡块地址,每块512字节 +* uint32_t buff[] 读出的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_BlockRead(uint32_t block_addr, uint32_t buff[]) +{ + uint32_t res, i; + uint32_t addr, resp; + + if(SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr; + else addr = block_addr * 512; + + res = SDIO_SendCmdWithData(SD_CMD_READ_SINGLE_BLOCK, addr, SD_RESP_32b, &resp, 1, 1); + if(res != SD_RES_OK) + return res; + + while((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFRDRDY_Msk; + + for(i = 0; i < 512/4; i++) buff[i] = SDIO->DATA; + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: SDIO_MultiBlockRead() +* 功能说明: 从SD卡读出多块数据 +* 输 入: uint32_t block_addr SD卡块地址,每块512字节 +* uint16_t block_cnt 要读出的块数 +* uint32_t buff[] 读出的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_MultiBlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) +{ + uint32_t res, i, j; + uint32_t addr, resp; + + if(SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr; + else addr = block_addr * 512; + + res = SDIO_SendCmdWithData(SD_CMD_READ_MULT_BLOCK, addr, SD_RESP_32b, &resp, 1, block_cnt); + if(res != SD_RES_OK) + return res; + + for(i = 0; i < block_cnt; i++) + { + while((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFRDRDY_Msk; + + for(j = 0; j < 512/4; j++) buff[i*(512/4) + j] = SDIO->DATA; + } + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: SDIO_DMABlockRead() +* 功能说明: 通过DMA从SD卡读出多块数据 +* 输 入: uint32_t block_addr SD卡块地址,每块512字节 +* uint16_t block_cnt 要读出的块数 +* uint32_t buff[] 读出的数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_DMABlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]) +{ + uint32_t res; + uint32_t addr, resp; + + if(SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) addr = block_addr; + else addr = block_addr * 512; + + SDIO->DMA_MEM_ADDR = (uint32_t)buff; + + res = SDIO_SendCmdWithDataByDMA(SD_CMD_READ_MULT_BLOCK, addr, SD_RESP_32b, &resp, 1, block_cnt); + if(res != SD_RES_OK) + return res; + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + +/****************************************************************************************************************************************** +* 函数名称: _SDIO_SendCmd() +* 功能说明: SDIO向SD卡发送命令 +* 输 入: uint32_t cmd 命令索引 +* uint32_t arg 命令参数 +* uint32_t resp_type 响应类型,取值SD_RESP_NO、SD_RESP_32b、SD_RESP_128b、SD_RESP_32b_busy +* uint32_t *resp_data 响应内容 +* uint32_t have_data 是否有数据传输 +* uint32_t data_read 1 读SD卡 0 写SD卡 +* uint16_t block_cnt 读写块个数 +* uint32_t use_dma 1 使用DMA搬运数据 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t _SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read, uint16_t block_cnt, uint32_t use_dma) +{ + SDIO->BLK &= ~SDIO_BLK_COUNT_Msk; + SDIO->BLK |= (block_cnt << SDIO_BLK_COUNT_Pos); + + SDIO->ARG = arg; + SDIO->CMD = (cmd << SDIO_CMD_CMDINDX_Pos) | + (0 << SDIO_CMD_CMDTYPE_Pos) | + (0 << SDIO_CMD_IDXCHECK_Pos) | + (0 << SDIO_CMD_CRCCHECK_Pos) | + (resp_type << SDIO_CMD_RESPTYPE_Pos) | + (have_data << SDIO_CMD_HAVEDATA_Pos) | + (data_read << SDIO_CMD_DIRREAD_Pos) | + ((block_cnt > 1) << SDIO_CMD_MULTBLK_Pos) | + ((block_cnt > 1) << SDIO_CMD_BLKCNTEN_Pos) | + (((cmd == 53) ? 0 : (block_cnt > 1)) << SDIO_CMD_AUTOCMD12_Pos) | + (use_dma << SDIO_CMD_DMAEN_Pos); + + while((SDIO->IF & SDIO_IF_CMDDONE_Msk) == 0) + { + if(SDIO->IF & SDIO_IF_CMDTIMEOUT_Msk) + { + SDIO->IF = SDIO_IF_CMDTIMEOUT_Msk; + + return SD_RES_TIMEOUT; + } + else if(SDIO->IF & SDIO_IF_ERROR_Msk) + { + SDIO->IF = 0xFFFFFFFF; + + return SD_RES_ERR; + } + } + SDIO->IF = SDIO_IF_CMDDONE_Msk; + + if(resp_type == SD_RESP_32b) + { + resp_data[0] = SDIO->RESP[0]; + } + else if(resp_type == SD_RESP_128b) + { + //寄存器中将CID/CSD[127-8]依次存放在了RESP3-0[119-0],最低位的CRC被丢掉 + //读出数据时调整了顺序,将CID/CSD[127-8]存放在resp_data0-3[127-8],最低8位填充0x00 + resp_data[0] = (SDIO->RESP[3] << 8) + ((SDIO->RESP[2] >> 24) & 0xFF); + resp_data[1] = (SDIO->RESP[2] << 8) + ((SDIO->RESP[1] >> 24) & 0xFF); + resp_data[2] = (SDIO->RESP[1] << 8) + ((SDIO->RESP[0] >> 24) & 0xFF); + resp_data[3] = (SDIO->RESP[0] << 8) + 0x00; + } + + return SD_RES_OK; +} + + +void parseCID(uint32_t CID_Tab[4]) +{ + uint8_t tmp = 0; + + /*!< Byte 0 */ + tmp = (uint8_t)((CID_Tab[0] & 0xFF000000) >> 24); + SD_cardInfo.SD_cid.ManufacturerID = tmp; + + /*!< Byte 1 */ + tmp = (uint8_t)((CID_Tab[0] & 0x00FF0000) >> 16); + SD_cardInfo.SD_cid.OEM_AppliID = tmp << 8; + + /*!< Byte 2 */ + tmp = (uint8_t)((CID_Tab[0] & 0x000000FF00) >> 8); + SD_cardInfo.SD_cid.OEM_AppliID |= tmp; + + /*!< Byte 3 */ + tmp = (uint8_t)(CID_Tab[0] & 0x000000FF); + SD_cardInfo.SD_cid.ProdName1 = tmp << 24; + + /*!< Byte 4 */ + tmp = (uint8_t)((CID_Tab[1] & 0xFF000000) >> 24); + SD_cardInfo.SD_cid.ProdName1 |= tmp << 16; + + /*!< Byte 5 */ + tmp = (uint8_t)((CID_Tab[1] & 0x00FF0000) >> 16); + SD_cardInfo.SD_cid.ProdName1 |= tmp << 8; + + /*!< Byte 6 */ + tmp = (uint8_t)((CID_Tab[1] & 0x0000FF00) >> 8); + SD_cardInfo.SD_cid.ProdName1 |= tmp; + + /*!< Byte 7 */ + tmp = (uint8_t)(CID_Tab[1] & 0x000000FF); + SD_cardInfo.SD_cid.ProdName2 = tmp; + + /*!< Byte 8 */ + tmp = (uint8_t)((CID_Tab[2] & 0xFF000000) >> 24); + SD_cardInfo.SD_cid.ProdRev = tmp; + + /*!< Byte 9 */ + tmp = (uint8_t)((CID_Tab[2] & 0x00FF0000) >> 16); + SD_cardInfo.SD_cid.ProdSN = tmp << 24; + + /*!< Byte 10 */ + tmp = (uint8_t)((CID_Tab[2] & 0x0000FF00) >> 8); + SD_cardInfo.SD_cid.ProdSN |= tmp << 16; + + /*!< Byte 11 */ + tmp = (uint8_t)(CID_Tab[2] & 0x000000FF); + SD_cardInfo.SD_cid.ProdSN |= tmp << 8; + + /*!< Byte 12 */ + tmp = (uint8_t)((CID_Tab[3] & 0xFF000000) >> 24); + SD_cardInfo.SD_cid.ProdSN |= tmp; + + /*!< Byte 13 */ + tmp = (uint8_t)((CID_Tab[3] & 0x00FF0000) >> 16); + SD_cardInfo.SD_cid.Reserved1 |= (tmp & 0xF0) >> 4; + SD_cardInfo.SD_cid.ManufactDate = (tmp & 0x0F) << 8; + + /*!< Byte 14 */ + tmp = (uint8_t)((CID_Tab[3] & 0x0000FF00) >> 8); + SD_cardInfo.SD_cid.ManufactDate |= tmp; +} + +void parseCSD(uint32_t CSD_Tab[4]) +{ + uint8_t tmp = 0; + + /*!< Byte 0 */ + tmp = (uint8_t)((CSD_Tab[0] & 0xFF000000) >> 24); + SD_cardInfo.SD_csd.CSDStruct = (tmp & 0xC0) >> 6; + SD_cardInfo.SD_csd.SysSpecVersion = (tmp & 0x3C) >> 2; + SD_cardInfo.SD_csd.Reserved1 = tmp & 0x03; + + /*!< Byte 1 */ + tmp = (uint8_t)((CSD_Tab[0] & 0x00FF0000) >> 16); + SD_cardInfo.SD_csd.TAAC = tmp; + + /*!< Byte 2 */ + tmp = (uint8_t)((CSD_Tab[0] & 0x0000FF00) >> 8); + SD_cardInfo.SD_csd.NSAC = tmp; + + /*!< Byte 3 */ + tmp = (uint8_t)(CSD_Tab[0] & 0x000000FF); + SD_cardInfo.SD_csd.MaxBusClkFrec = tmp; + + /*!< Byte 4 */ + tmp = (uint8_t)((CSD_Tab[1] & 0xFF000000) >> 24); + SD_cardInfo.SD_csd.CardComdClasses = tmp << 4; + + /*!< Byte 5 */ + tmp = (uint8_t)((CSD_Tab[1] & 0x00FF0000) >> 16); + SD_cardInfo.SD_csd.CardComdClasses |= (tmp & 0xF0) >> 4; + SD_cardInfo.SD_csd.RdBlockLen = tmp & 0x0F; + + /*!< Byte 6 */ + tmp = (uint8_t)((CSD_Tab[1] & 0x0000FF00) >> 8); + SD_cardInfo.SD_csd.PartBlockRead = (tmp & 0x80) >> 7; + SD_cardInfo.SD_csd.WrBlockMisalign = (tmp & 0x40) >> 6; + SD_cardInfo.SD_csd.RdBlockMisalign = (tmp & 0x20) >> 5; + SD_cardInfo.SD_csd.DSRImpl = (tmp & 0x10) >> 4; + SD_cardInfo.SD_csd.Reserved2 = 0; /*!< Reserved */ + + if ((SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V1_1) || + (SD_cardInfo.CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0)) + { + SD_cardInfo.SD_csd.DeviceSize = (tmp & 0x03) << 10; + + /*!< Byte 7 */ + tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF); + SD_cardInfo.SD_csd.DeviceSize |= (tmp) << 2; + + /*!< Byte 8 */ + tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24); + SD_cardInfo.SD_csd.DeviceSize |= (tmp & 0xC0) >> 6; + + SD_cardInfo.SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3; + SD_cardInfo.SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07); + + /*!< Byte 9 */ + tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16); + SD_cardInfo.SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5; + SD_cardInfo.SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2; + SD_cardInfo.SD_csd.DeviceSizeMul = (tmp & 0x03) << 1; + /*!< Byte 10 */ + tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8); + SD_cardInfo.SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7; + + SD_cardInfo.CardCapacity = (SD_cardInfo.SD_csd.DeviceSize + 1) ; + SD_cardInfo.CardCapacity *= (1 << (SD_cardInfo.SD_csd.DeviceSizeMul + 2)); + SD_cardInfo.CardBlockSize = 1 << (SD_cardInfo.SD_csd.RdBlockLen); + SD_cardInfo.CardCapacity *= SD_cardInfo.CardBlockSize; + } + else if (SD_cardInfo.CardType == SDIO_HIGH_CAPACITY_SD_CARD) + { + /*!< Byte 7 */ + tmp = (uint8_t)(CSD_Tab[1] & 0x000000FF); + SD_cardInfo.SD_csd.DeviceSize = (tmp & 0x3F) << 16; + + /*!< Byte 8 */ + tmp = (uint8_t)((CSD_Tab[2] & 0xFF000000) >> 24); + + SD_cardInfo.SD_csd.DeviceSize |= (tmp << 8); + + /*!< Byte 9 */ + tmp = (uint8_t)((CSD_Tab[2] & 0x00FF0000) >> 16); + + SD_cardInfo.SD_csd.DeviceSize |= (tmp); + + /*!< Byte 10 */ + tmp = (uint8_t)((CSD_Tab[2] & 0x0000FF00) >> 8); + + SD_cardInfo.CardCapacity = (uint64_t)(SD_cardInfo.SD_csd.DeviceSize + 1) * 512 * 1024; + SD_cardInfo.CardBlockSize = 512; + } + + SD_cardInfo.SD_csd.EraseGrSize = (tmp & 0x40) >> 6; + SD_cardInfo.SD_csd.EraseGrMul = (tmp & 0x3F) << 1; + + /*!< Byte 11 */ + tmp = (uint8_t)(CSD_Tab[2] & 0x000000FF); + SD_cardInfo.SD_csd.EraseGrMul |= (tmp & 0x80) >> 7; + SD_cardInfo.SD_csd.WrProtectGrSize = (tmp & 0x7F); + + /*!< Byte 12 */ + tmp = (uint8_t)((CSD_Tab[3] & 0xFF000000) >> 24); + SD_cardInfo.SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7; + SD_cardInfo.SD_csd.ManDeflECC = (tmp & 0x60) >> 5; + SD_cardInfo.SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2; + SD_cardInfo.SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2; + + /*!< Byte 13 */ + tmp = (uint8_t)((CSD_Tab[3] & 0x00FF0000) >> 16); + SD_cardInfo.SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6; + SD_cardInfo.SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5; + SD_cardInfo.SD_csd.Reserved3 = 0; + SD_cardInfo.SD_csd.ContentProtectAppli = (tmp & 0x01); + + /*!< Byte 14 */ + tmp = (uint8_t)((CSD_Tab[3] & 0x0000FF00) >> 8); + SD_cardInfo.SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7; + SD_cardInfo.SD_csd.CopyFlag = (tmp & 0x40) >> 6; + SD_cardInfo.SD_csd.PermWrProtect = (tmp & 0x20) >> 5; + SD_cardInfo.SD_csd.TempWrProtect = (tmp & 0x10) >> 4; + SD_cardInfo.SD_csd.FileFormat = (tmp & 0x0C) >> 2; + SD_cardInfo.SD_csd.ECC = (tmp & 0x03); +} + +uint32_t calcSDCLKDiv(uint32_t freq) +{ + uint32_t prediv; + switch((SYS->CLKSEL & SYS_CLKSEL_SDIO_Msk) >> SYS_CLKSEL_SDIO_Pos) + { + case 0: prediv = 1; break; + case 1: prediv = 3; break; + case 2: prediv = 2; break; + case 3: prediv = 0; break; + } + + uint32_t clkdiv = (SystemCoreClock / (1 << prediv)) / freq; + uint32_t regdiv = 0; + + if(clkdiv > 128) regdiv = 0x80; + else if(clkdiv > 64) regdiv = 0x40; + else if(clkdiv > 32) regdiv = 0x20; + else if(clkdiv > 16) regdiv = 0x10; + else if(clkdiv > 8) regdiv = 0x08; + else if(clkdiv > 4) regdiv = 0x04; + else if(clkdiv > 2) regdiv = 0x02; + else if(clkdiv > 1) regdiv = 0x01; + else regdiv = 0x00; + + return regdiv; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_Init() +* 功能说明: SDIO读写IO卡初始化 +* 输 入: uint32_t freq SDIO_CLK时钟频率 +* enum SDIO_bus_width w SDIO_1bit 1-bit bus SDIO_4bit 4-bit bus +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_Init(uint32_t freq, enum SDIO_bus_width w) +{ + uint32_t res; + uint32_t resp, resps[4]; + + SYS->CLKSEL &= ~SYS_CLKSEL_SDIO_Msk; + if(SystemCoreClock > 80000000) //SDIO时钟需要小于52MHz + SYS->CLKSEL |= (2 << SYS_CLKSEL_SDIO_Pos); //SDCLK = SYSCLK / 4 + else + SYS->CLKSEL |= (0 << SYS_CLKSEL_SDIO_Pos); //SDCLK = SYSCLK / 2 + + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_SDIO_Pos); + +// SDIO->CR2 = (1 << SDIO_CR2_RSTALL_Pos); + for(int i = 0; i < CyclesPerUs; i++) __NOP(); + + SDIO->CR1 = (1 << SDIO_CR1_CDSRC_Pos) | + (0 << SDIO_CR1_8BIT_Pos) | + (w << SDIO_CR1_4BIT_Pos) | + (1 << SDIO_CR1_PWRON_Pos) | + (7 << SDIO_CR1_VOLT_Pos); + + SDIO->CR2 = (1 << SDIO_CR2_CLKEN_Pos) | + (1 << SDIO_CR2_SDCLKEN_Pos) | + (calcSDCLKDiv(freq) << SDIO_CR2_SDCLKDIV_Pos) | + (0xC << SDIO_CR2_TIMEOUT_Pos); // 2**25 SDIO_CLK + + while((SDIO->CR2 & SDIO_CR2_CLKRDY_Msk) == 0); + + for(int i = 0; i < CyclesPerUs * 10; i++) __NOP(); + + SDIO->IM = 0xFFFFFFFF; + + return SD_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_ByteWrite() +* 功能说明: 向IO卡写入单个字节 +* 输 入: uint8_t func The number of the function within the I/O card you wish to read or write +* uint32_t addr Start Address of I/O register to read or write. Range is 0--0x1FFFF +* uint32_t buff[] 要写出的数据 +* uint16_t block_size 要写出的字节个数,取值 1--512 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_ByteWrite(uint8_t func, uint32_t addr, uint8_t data) +{ + uint32_t res; + uint32_t arg, resp; + + arg = (1u << SD_CMD53_ARG_nRW) | + (func << SD_CMD53_ARG_Function) | + (addr << SD_CMD53_ARG_Addr) | data; + + res = SDIO_SendCmd(52, arg, SD_RESP_32b, &resp); + if(res != SD_RES_OK) + return res; + + return SD_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_ByteRead() +* 功能说明: 从IO卡读出单个字节 +* 输 入: uint8_t func The number of the function within the I/O card you wish to read or write +* uint32_t addr Start Address of I/O register to read or write. Range is 0--0x1FFFF +* uint32_t buff[] 读取到的数据存入此数组 +* uint16_t block_size 要读取的字节个数,取值 1--512 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_ByteRead(uint8_t func, uint32_t addr, uint8_t * data) +{ + uint32_t res; + uint32_t arg, resp; + + arg = (0u << SD_CMD53_ARG_nRW) | + (func << SD_CMD53_ARG_Function) | + (addr << SD_CMD53_ARG_Addr) | 0x00; + + res = SDIO_SendCmd(52, arg, SD_RESP_32b, &resp); + if(res != SD_RES_OK) + return res; + + *data = resp & 0xFF; + + return SD_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_BlockWrite() +* 功能说明: 向IO卡写入单个块数据 +* 输 入: uint8_t func The number of the function within the I/O card you wish to read or write +* uint32_t addr Start Address of I/O register to read or write. Range is 0--0x1FFFF +* uint8_t addrInc 0 Multi byte R/W to fixed address 1 Multi byte R/W to incrementing address +* uint32_t buff[] 要写出的数据 +* uint16_t block_size 要写出的字节个数,取值 1--512 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_BlockWrite(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_size) +{ + uint32_t res, i; + uint32_t arg, resp; + + SDIO->BLK = block_size; + + arg = (1u << SD_CMD53_ARG_nRW) | + (func << SD_CMD53_ARG_Function) | + (addr << SD_CMD53_ARG_Addr) | + (addrInc << SD_CMD53_ARG_AddrInc) | + ((block_size % 512) << SD_CMD53_ARG_Count) | + (0 << SD_CMD53_ARG_CountUnit); + + res = SDIO_SendCmdWithData(53, arg, SD_RESP_32b, &resp, 0, 1); + if(res != SD_RES_OK) + return res; + + while((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFWRRDY_Msk; + + for(i = 0; i < block_size/4; i++) SDIO->DATA = buff[i]; + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_BlockRead() +* 功能说明: 从IO卡读出单个块数据 +* 输 入: uint8_t func The number of the function within the I/O card you wish to read or write +* uint32_t addr Start Address of I/O register to read or write. Range is 0--0x1FFFF +* uint8_t addrInc 0 Multi byte R/W to fixed address 1 Multi byte R/W to incrementing address +* uint32_t buff[] 读取到的数据存入此数组 +* uint16_t block_size 要读取的字节个数,取值 1--512 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_BlockRead(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_size) +{ + uint32_t res, i; + uint32_t arg, resp; + + SDIO->BLK = block_size; + + arg = (0u << SD_CMD53_ARG_nRW) | + (func << SD_CMD53_ARG_Function) | + (addr << SD_CMD53_ARG_Addr) | + (addrInc << SD_CMD53_ARG_AddrInc) | + ((block_size % 512) << SD_CMD53_ARG_Count) | + (0 << SD_CMD53_ARG_CountUnit); + + res = SDIO_SendCmdWithData(53, arg, SD_RESP_32b, &resp, 1, 1); + if(res != SD_RES_OK) + return res; + + while((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFRDRDY_Msk; + + for(i = 0; i < block_size/4; i++) buff[i] = SDIO->DATA; + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_MultiBlockWrite() +* 功能说明: 向IO卡写入多个块数据 +* 输 入: uint8_t func The number of the function within the I/O card you wish to read or write +* uint32_t addr Start Address of I/O register to read or write. Range is 0--0x1FFFF +* uint8_t addrInc 0 Multi byte R/W to fixed address 1 Multi byte R/W to incrementing address +* uint32_t buff[] 要写出的数据 +* uint16_t block_count 要写出的块个数,块大小为 512 字节 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_MultiBlockWrite(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_count) +{ + uint32_t res, i, j; + uint32_t arg, resp; + + SDIO->BLK = 512; + + arg = (1u << SD_CMD53_ARG_nRW) | + (func << SD_CMD53_ARG_Function) | + (addr << SD_CMD53_ARG_Addr) | + (addrInc << SD_CMD53_ARG_AddrInc) | + (block_count << SD_CMD53_ARG_Count) | + (1 << SD_CMD53_ARG_CountUnit); + + res = SDIO_SendCmdWithData(53, arg, SD_RESP_32b, &resp, 0, block_count); + if(res != SD_RES_OK) + return res; + + for(i = 0; i < block_count; i++) + { + while((SDIO->IF & SDIO_IF_BUFWRRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFWRRDY_Msk; + + for(j = 0; j < 512/4; j++) SDIO->DATA = buff[i*(512/4) + j]; + } + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: SDIO_IO_MultiBlockRead() +* 功能说明: 从IO卡读出多个块数据 +* 输 入: uint8_t func The number of the function within the I/O card you wish to read or write +* uint32_t addr Start Address of I/O register to read or write. Range is 0--0x1FFFF +* uint8_t addrInc 0 Multi byte R/W to fixed address 1 Multi byte R/W to incrementing address +* uint32_t buff[] 读取到的数据存入此数组 +* uint16_t block_count 要读取的块个数,块大小为 512 字节 +* 输 出: uint32_t SD_RES_OK 操作成功 SD_RES_ERR 操作失败 SD_RES_TIMEOUT 操作超时 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SDIO_IO_MultiBlockRead(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_count) +{ + uint32_t res, i, j; + uint32_t arg, resp; + + SDIO->BLK = 512; + + arg = (0u << SD_CMD53_ARG_nRW) | + (func << SD_CMD53_ARG_Function) | + (addr << SD_CMD53_ARG_Addr) | + (addrInc << SD_CMD53_ARG_AddrInc) | + (block_count << SD_CMD53_ARG_Count) | + (1 << SD_CMD53_ARG_CountUnit); + + res = SDIO_SendCmdWithData(53, arg, SD_RESP_32b, &resp, 1, block_count); + if(res != SD_RES_OK) + return res; + + for(i = 0; i < block_count; i++) + { + while((SDIO->IF & SDIO_IF_BUFRDRDY_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_BUFRDRDY_Msk; + + for(j = 0; j < 512/4; j++) buff[i*(512/4) + j] = SDIO->DATA; + } + + while((SDIO->IF & SDIO_IF_TRXDONE_Msk) == 0) __NOP(); + SDIO->IF = SDIO_IF_TRXDONE_Msk; + + return SD_RES_OK; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h new file mode 100644 index 0000000000..d1610bee31 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdio.h @@ -0,0 +1,174 @@ +#ifndef __SWM341_SDIO_H__ +#define __SWM341_SDIO_H__ + + +#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) +#define SD_CMD_SEND_OP_COND ((uint8_t)1) +#define SD_CMD_ALL_SEND_CID ((uint8_t)2) +#define SD_CMD_SET_REL_ADDR ((uint8_t)3) +#define SD_CMD_SET_DSR ((uint8_t)4) +#define SD_CMD_HS_SWITCH ((uint8_t)6) +#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) +#define SD_CMD_SEND_IF_COND ((uint8_t)8) +#define SD_CMD_SEND_CSD ((uint8_t)9) +#define SD_CMD_SEND_CID ((uint8_t)10) +#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) +#define SD_CMD_SEND_STATUS ((uint8_t)13) +#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) +#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) +#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) +#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) +#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) +#define SD_CMD_PROG_CID ((uint8_t)26) +#define SD_CMD_PROG_CSD ((uint8_t)27) +#define SD_CMD_APP_CMD ((uint8_t)55) + +/*Following commands are SD Card Specific commands. + SDIO_APP_CMD should be sent before sending these commands. */ +#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) +#define SD_CMD_SD_APP_STAUS ((uint8_t)13) +#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) +#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) +#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) +#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) +#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) +#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) + +#define SD_CMD53_ARG_Count 0 // 0x001 1 0x002 2 ... 0x1FF 512 0x000 512 byte +#define SD_CMD53_ARG_Addr 9 // Start Address of I/O register to read or write +#define SD_CMD53_ARG_AddrInc 26 // 0 Multi byte R/W to fixed address 1 Multi byte R/W to incrementing address +#define SD_CMD53_ARG_CountUnit 27 // 0 Count in byte 1 Count in block +#define SD_CMD53_ARG_Function 28 // The number of the function within the I/O card you wish to read or write. Function 0x00 selects the common I/O area (CIA). +#define SD_CMD53_ARG_nRW 31 // 0 for read 1 for write + + +#define SD_RESP_NO 0 //0 无响应 +#define SD_RESP_32b 2 //2 32位响应 +#define SD_RESP_128b 1 //1 128位响应 +#define SD_RESP_32b_busy 3 //3 32位响应,check Busy after response + +#define SD_BUSWIDTH_1b 0 +#define SD_BUSWIDTH_4b 2 + +#define SD_RES_OK 0 +#define SD_RES_ERR 1 +#define SD_RES_TIMEOUT 2 + + +/* Card Status return by response R1 */ +#define SD_CS_APP_CMD (1 << 5) // The card will expect ACMD +#define SD_CS_READY_FOR_DATA (1 << 8) // Corresponds to buffer empty signaling on the bus +#define SD_CS_CURRENT_STATE (1 << 9) // The state of the card when receiving the command. 共 4 位 +#define SD_CS_CARD_ECC_FAILED (1 << 21) +#define SD_CS_ILLEGAL_COMMAND (1 << 22) +#define SD_CS_CARD_IS_LOCKED (1 << 25) + + +typedef struct +{ + __IO uint8_t CSDStruct; // CSD structure + __IO uint8_t SysSpecVersion; // System specification version + __IO uint8_t Reserved1; // Reserved + __IO uint8_t TAAC; // Data read access-time 1 + __IO uint8_t NSAC; // Data read access-time 2 in CLK cycles + __IO uint8_t MaxBusClkFrec; // Max. bus clock frequency + __IO uint16_t CardComdClasses; //< Card command classes + __IO uint8_t RdBlockLen; // Max. read data block length + __IO uint8_t PartBlockRead; // Partial blocks for read allowed + __IO uint8_t WrBlockMisalign; // Write block misalignment + __IO uint8_t RdBlockMisalign; // Read block misalignment + __IO uint8_t DSRImpl; // DSR implemented + __IO uint8_t Reserved2; // Reserved + __IO uint32_t DeviceSize; // Device Size + __IO uint8_t MaxRdCurrentVDDMin; // Max. read current @ VDD min + __IO uint8_t MaxRdCurrentVDDMax; // Max. read current @ VDD max + __IO uint8_t MaxWrCurrentVDDMin; // Max. write current @ VDD min + __IO uint8_t MaxWrCurrentVDDMax; // Max. write current @ VDD max + __IO uint8_t DeviceSizeMul; // Device size multiplier + __IO uint8_t EraseGrSize; // Erase group size + __IO uint8_t EraseGrMul; // Erase group size multiplier + __IO uint8_t WrProtectGrSize; // Write protect group size + __IO uint8_t WrProtectGrEnable; // Write protect group enable + __IO uint8_t ManDeflECC; // Manufacturer default ECC + __IO uint8_t WrSpeedFact; // Write speed factor + __IO uint8_t MaxWrBlockLen; // Max. write data block length + __IO uint8_t WriteBlockPaPartial; // Partial blocks for write allowed + __IO uint8_t Reserved3; // Reserded + __IO uint8_t ContentProtectAppli; // Content protection application + __IO uint8_t FileFormatGrouop; // File format group + __IO uint8_t CopyFlag; // Copy flag (OTP) + __IO uint8_t PermWrProtect; // Permanent write protection + __IO uint8_t TempWrProtect; // Temporary write protection + __IO uint8_t FileFormat; // File Format + __IO uint8_t ECC; // ECC code +} SD_CSD; + +typedef struct +{ + __IO uint8_t ManufacturerID; // ManufacturerID + __IO uint16_t OEM_AppliID; // OEM/Application ID + __IO uint32_t ProdName1; // Product Name part1 + __IO uint8_t ProdName2; // Product Name part2 + __IO uint8_t ProdRev; // Product Revision + __IO uint32_t ProdSN; // Product Serial Number + __IO uint8_t Reserved1; // Reserved1 + __IO uint16_t ManufactDate; // Manufacturing Date +} SD_CID; + + +#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) +#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) +#define SDIO_HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) +#define SDIO_MULTIMEDIA_CARD ((uint32_t)0x00000003) +#define SDIO_SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) +#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) +#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) +#define SDIO_HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) + + +typedef struct +{ + SD_CSD SD_csd; + SD_CID SD_cid; + uint64_t CardCapacity; // Card Capacity + uint32_t CardBlockSize; // Card Block Size + uint16_t RCA; + uint8_t CardType; +} SD_CardInfo; + + +extern SD_CardInfo SD_cardInfo; + +uint32_t SDIO_Init(uint32_t freq); +uint32_t SDIO_BlockWrite(uint32_t block_addr, uint32_t buff[]); +uint32_t SDIO_BlockRead(uint32_t block_addr, uint32_t buff[]); + +uint32_t SDIO_MultiBlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); +uint32_t SDIO_MultiBlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); + +uint32_t SDIO_DMABlockWrite(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); +uint32_t SDIO_DMABlockRead(uint32_t block_addr, uint16_t block_cnt, uint32_t buff[]); + +uint32_t _SDIO_SendCmd(uint32_t cmd, uint32_t arg, uint32_t resp_type, uint32_t *resp_data, uint32_t have_data, uint32_t data_read, uint16_t block_cnt, uint32_t use_dma); + +#define SDIO_SendCmd(cmd, arg, resp_type, resp_data) _SDIO_SendCmd(cmd, arg, resp_type, resp_data, 0, 0, 0, 0) +#define SDIO_SendCmdWithData(cmd, arg, resp_type, resp_data, data_read, block_cnt) _SDIO_SendCmd(cmd, arg, resp_type, resp_data, 1, data_read, block_cnt, 0) +#define SDIO_SendCmdWithDataByDMA(cmd, arg, resp_type, resp_data, data_read, block_cnt) _SDIO_SendCmd(cmd, arg, resp_type, resp_data, 1, data_read, block_cnt, 1) + +void parseCID(uint32_t CID_Tab[4]); +void parseCSD(uint32_t CID_Tab[4]); + +uint32_t calcSDCLKDiv(uint32_t freq_sel); + + +enum SDIO_bus_width { SDIO_1bit = 0, SDIO_4bit = 1 }; + +uint32_t SDIO_IO_Init(uint32_t freq, enum SDIO_bus_width w); +uint32_t SDIO_IO_ByteWrite(uint8_t func, uint32_t addr, uint8_t data); +uint32_t SDIO_IO_ByteRead(uint8_t func, uint32_t addr, uint8_t * data); +uint32_t SDIO_IO_BlockWrite(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_size); +uint32_t SDIO_IO_BlockRead(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_size); +uint32_t SDIO_IO_MultiBlockWrite(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_count); +uint32_t SDIO_IO_MultiBlockRead(uint8_t func, uint32_t addr, uint8_t addrInc, uint32_t buff[], uint16_t block_count); + +#endif //__SWM341_SDIO_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdram.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdram.c new file mode 100644 index 0000000000..8c9741a9ef --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdram.c @@ -0,0 +1,91 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_sdram.c +* 功能说明: SWM341单片机的SDRAM驱动程序 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_sdram.h" + +/****************************************************************************************************************************************** +* 函数名称: SDRAM_Init() +* 功能说明: SDRAM控制器初始化 +* 输 入: SDRAM_InitStructure * initStruct 包含 SDRAM 控制器相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SDRAM_Init(SDRAM_InitStructure * initStruct) +{ + uint32_t cyclesPerUs = CyclesPerUs / (initStruct->ClkDiv + 1); // 1us有多少个SDRAM_CLK周期 + uint32_t row_n; + + SYS->CLKEN1 |= (1 << SYS_CLKEN1_SDRAM_Pos); + + SDRAMC->TIM = (initStruct->TimeTRP << SDRAMC_TIM_TRP_Pos) | + (initStruct->TimeTRCD << SDRAMC_TIM_TRCD_Pos) | + (initStruct->TimeTRC << SDRAMC_TIM_TRC_Pos) | + ((cyclesPerUs * 200) << SDRAMC_TIM_T100US_Pos); // 要求大于100us + + SDRAMC->CFG = (initStruct->Size << SDRAMC_CFG_SIZE_Pos) | + (initStruct->ClkDiv << SDRAMC_CFG_CLKDIV_Pos) | + (initStruct->CASLatency << SDRAMC_CFG_CASDELAY_Pos) | + (((SystemCoreClock / (initStruct->ClkDiv + 1)) > 66000000) << SDRAMC_CFG_HIGHFREQ_Pos); + + switch(initStruct->Size) + { + case SDRAM_SIZE_2MB: row_n = 2048; break; + case SDRAM_SIZE_8MB: row_n = 4096; break; + case SDRAM_SIZE_16MB: row_n = 4096; break; + case SDRAM_SIZE_32MB: row_n = 8192; break; + default: row_n = 4096; break; + } + + SDRAMC->T64 = (initStruct->RefreshTime * 1000 / row_n + 1) * cyclesPerUs; + + SDRAMC->CR = (1 << SDRAMC_CR_PWRON_Pos); + + while(SDRAMC->CR & SDRAMC_CR_PWRON_Msk) __NOP(); //等待初始完成 +} + + +/****************************************************************************************************************************************** +* 函数名称: SDRAM_Enable() +* 功能说明: SDRAM使能,使能后可读写SDRAM +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SDRAM_Enable(void) +{ + SDRAMC->CR &= ~SDRAMC_CR_ENTERSRF_Msk; + + for(int i = 0; i < 100; i++) __NOP(); +} + +/****************************************************************************************************************************************** +* 函数名称: SDRAM_Disable() +* 功能说明: SDRAM禁能,禁能后SDRAM颗粒进入低功耗模式、并自刷新,不可读写 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SDRAM_Disable(void) +{ + SDRAMC->CR |= SDRAMC_CR_ENTERSRF_Msk; + + for(int i = 0; i < 100; i++) __NOP(); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdram.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdram.h new file mode 100644 index 0000000000..f0dcf68d6a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sdram.h @@ -0,0 +1,59 @@ +#ifndef __SWM341_SDRAM_H__ +#define __SWM341_SDRAM_H__ + +typedef struct { + uint8_t Size; // SDRAM 容量,SDRAM_SIZE_2MB、SDRAM_SIZE_8MB、SDRAM_SIZE_16MB、SDRAM_SIZE_32MB + uint8_t ClkDiv; // SDRAM 时钟分频,SDRAM_CLKDIV_1、SDRAM_CLKDIV_2 + uint8_t CASLatency; // 列地址到有效数据输出间隔,SDRAM_CASLATENCY_2、SDRAM_CASLATENCY_3 + uint8_t RefreshTime; // 刷新时间,单位 ms,在这个时间内 SDRAM 必须完成一次整片刷新,通常为 64ms + + uint8_t TimeTRP; // Row precharge delay,Precharge命令到另一个命令间延时 + uint8_t TimeTRCD; // Row to column delay,行地址到列地址间延时,也即Activate命令到读写命令间延时 + uint8_t TimeTRC; // Row cycle time, Activate to Activate on same bank + // 若 SDRAM 颗粒除了 tRC,还有 tRFC 或 tRRC 参数,则按照二者中较大的计算 TimeTRC +} SDRAM_InitStructure; + + // rowaddr bankaddr coladdr +#define SDRAM_SIZE_2MB 3 // HADDR[20:10] HADDR[9] HADDR[8:1] +#define SDRAM_SIZE_8MB 0 // HADDR[22:11] HADDR[10:9] HADDR[8:1] +#define SDRAM_SIZE_16MB 1 // HADDR[23:12] HADDR[11:10] HADDR[9:1] +#define SDRAM_SIZE_32MB 2 // HADDR[24:12] HADDR[11:10] HADDR[9:1] + +#define SDRAM_CLKDIV_1 0 // 支持的 CPU 频率范围:80MHz--125MHz +#define SDRAM_CLKDIV_2 1 // 支持的 CPU 频率范围:20MHz--160Mhz + +#define SDRAM_CASLATENCY_2 0 +#define SDRAM_CASLATENCY_3 1 + + +#define SDRAM_TRP_1 0 +#define SDRAM_TRP_2 1 +#define SDRAM_TRP_3 2 +#define SDRAM_TRP_4 3 + +#define SDRAM_TRCD_1 0 +#define SDRAM_TRCD_2 1 +#define SDRAM_TRCD_3 2 +#define SDRAM_TRCD_4 3 + +#define SDRAM_TRC_4 3 +#define SDRAM_TRC_5 4 +#define SDRAM_TRC_6 5 +#define SDRAM_TRC_7 6 +#define SDRAM_TRC_8 7 +#define SDRAM_TRC_9 8 +#define SDRAM_TRC_10 9 +#define SDRAM_TRC_11 10 +#define SDRAM_TRC_12 11 +#define SDRAM_TRC_13 12 +#define SDRAM_TRC_14 13 +#define SDRAM_TRC_15 14 +#define SDRAM_TRC_16 15 + + +void SDRAM_Init(SDRAM_InitStructure * initStruct); + +void SDRAM_Enable(void); +void SDRAM_Disable(void); + +#endif //__SWM341_SDRAM_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sfc.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sfc.c new file mode 100644 index 0000000000..a53853b4cf --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sfc.c @@ -0,0 +1,328 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_sfc.c +* 功能说明: SWM341单片机的SFC(Serial Flash Controller)模块驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2017年10月25日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_sfc.h" + + +/****************************************************************************************************************************************** +* 函数名称: SFC_Init() +* 功能说明: SFC(Serial Flash Controller)初始化 +* 输 入: SFC_InitStructure * initStruct SFC初始化配置值 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SFC_Init(SFC_InitStructure * initStruct) +{ + SYS->CLKEN1 |= (1 << SYS_CLKEN1_SFC_Pos); + + *((__IO uint32_t *)((uint32_t )&SFC->CFG + 0x3F4)) = 7; + + SFC->CFG &= ~(SFC_CFG_CLKDIV_Msk | SFC_CFG_DATA4L_RD_Msk | SFC_CFG_DATA4L_PP_Msk); + SFC->CFG |= (initStruct->ClkDiv << SFC_CFG_CLKDIV_Pos) | + (initStruct->Width_Read << SFC_CFG_DATA4L_RD_Pos) | + (initStruct->Width_PageProgram << SFC_CFG_DATA4L_PP_Pos); + + SFC->CFG |= (1 << SFC_CFG_CMDWREN_Pos); + SFC->CMDAHB &= ~(SFC_CMDAHB_READ_Msk | SFC_CMDAHB_PP_Msk); + SFC->CMDAHB |= (initStruct->Cmd_Read << SFC_CMDAHB_READ_Pos) | + (initStruct->Cmd_PageProgram << SFC_CMDAHB_PP_Pos); + SFC->CFG &= ~(1 << SFC_CFG_CMDWREN_Pos); + + SFC->TIM &= ~(SFC_TIM_WIP_CHK_ITV_Msk | SFC_TIM_WIP_CHK_LMT_Msk); + SFC->TIM |= ((CyclesPerUs / 10) << SFC_TIM_WIP_CHK_ITV_Pos) | //2048 * (CyclesPerUs / 10) / CyclesPerUs us = 0.2 ms + (255 << SFC_TIM_WIP_CHK_LMT_Pos); + + if((initStruct->Width_Read == SFC_RDWIDTH_4) || (initStruct->Width_PageProgram == SFC_PPWIDTH_4)) + { + if(SFC_QuadState() == 0) + SFC_QuadSwitch(1); + } +} + +/****************************************************************************************************************************************** +* 函数名称: SFC_ReadJEDEC() +* 功能说明: 读取 JEDEC ID +* 输 入: 无 +* 输 出: uint32_t JEDEC ID +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SFC_ReadJEDEC(void) +{ + SFC->CFG &= ~SFC_CFG_CMDTYPE_Msk; + SFC->CFG |= (1 << SFC_CFG_CMDWREN_Pos) | + (2 << SFC_CFG_CMDTYPE_Pos); + SFC->CMD = SFC_CMD_READ_JEDEC; + + SFC->GO = 1; + __DSB(); __ISB(); + while(SFC->GO) __NOP(); + + return SFC->DATA; +} + +/****************************************************************************************************************************************** +* 函数名称: SFC_Erase() +* 功能说明: SPI Flash扇区擦除,每个扇区4K字节 +* 输 入: uint32_t addr 要擦除扇区的地址,必须4K对齐,即addr%4096 == 0 +* uint8_t wait 1 等待 Flash 完成擦除操作后再返回 0 发出擦除命令后立即返回 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SFC_Erase(uint32_t addr, uint8_t wait) +{ + SFC_EraseEx(addr, SFC_CMD_ERASE_SECTOR, wait); +} + +/****************************************************************************************************************************************** +* 函数名称: SFC_EraseEx() +* 功能说明: SPI Flash擦除,通过提供不同的命令码支持片擦、块擦、扇区擦 +* 输 入: uint32_t addr 要擦除的块的地址,当 addr == 0xFFFFFFFF 时,执行片擦 +* uint8_t cmd 擦除命令码,有些SPI Flash支持多种大小的块的擦除,不同块大大小使用不同命令码 +* uint8_t wait 1 等待 Flash 完成擦除操作后再返回 0 发出擦除命令后立即返回 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SFC_EraseEx(uint32_t addr, uint8_t cmd, uint8_t wait) +{ + uint8_t type = (addr == 0xFFFFFFFF) ? 5 : 7; + + SFC->ADDR = addr; + + SFC->CFG &= ~SFC_CFG_CMDTYPE_Msk; + SFC->CFG |= (1 << SFC_CFG_WREN_Pos) | + (1 << SFC_CFG_CMDWREN_Pos) | + (type << SFC_CFG_CMDTYPE_Pos); + SFC->CMD = cmd; + + SFC->GO = 1; + __DSB(); __ISB(); + while(SFC->GO) __NOP(); + + SFC->CFG &= ~SFC_CFG_WREN_Msk; + + if(wait) + while(SFC_FlashBusy()) __NOP(); +} + +/****************************************************************************************************************************************** +* 函数名称: SFC_Write() +* 功能说明: SPI Flash数据写入 +* 输 入: uint32_t addr 数据要写入到Flash中的地址,字对齐 +* uint32_t buff[] 要写入Flash中的数据 +* uint32_t cnt 要写的数据的个数,以字为单位,最大64 +* 输 出: 无 +* 注意事项: 要写入的数据必须全部在同一页内,即addr/256 == (addr+(cnt-1)*4)/256 +* 当 cnt > 4 时,LCD_DCLK 输出可能出现间断(|__| ̄|__| ̄|__| ̄ ̄ ̄ ̄ ̄ ̄ ̄ ̄|__| ̄|__| ̄|__|),这种情况下有些屏幕会显示异常,遇 +* 到这种情况,可通过以 cnt = 4 多次调用 SFC_Write() 解决 +******************************************************************************************************************************************/ +void SFC_Write(uint32_t addr, uint32_t buff[], uint32_t cnt) +{ + SFC->CFG |= (1 << SFC_CFG_WREN_Pos); + for(int i = 0; i < cnt; i++) + *((volatile unsigned int *)(0x70000000+addr+i*4)) = buff[i]; + + while(SFC->SR & SFC_SR_BUSY_Msk) __NOP(); + SFC->CFG &= ~SFC_CFG_WREN_Msk; +} + + +#define IOSPI_CS_Low() GPIO_ClrBit(GPIOD, PIN6); __NOP(); __NOP(); __NOP(); __NOP() +#define IOSPI_CS_High() __NOP(); __NOP(); __NOP(); __NOP(); GPIO_SetBit(GPIOD, PIN6) +#define IOSPI_CLK_Low() GPIO_ClrBit(GPIOD, PIN5); __NOP(); __NOP() +#define IOSPI_CLK_High() __NOP(); __NOP(); GPIO_SetBit(GPIOD, PIN5) +#define IOSPI_MOSI_Low() GPIO_ClrBit(GPIOD, PIN8) +#define IOSPI_MOSI_High() GPIO_SetBit(GPIOD, PIN8) +#define IOSPI_MISO_Value() GPIO_GetBit(GPIOD, PIN7) + +static uint8_t IOSPI_ReadWrite(uint8_t data) +{ + uint8_t val = 0; + + for(int i = 0; i < 8; i++) + { + IOSPI_CLK_Low(); + + if(data & (1 << (7 - i))) + IOSPI_MOSI_High(); + else + IOSPI_MOSI_Low(); + + IOSPI_CLK_High(); + + val = (val << 1) | IOSPI_MISO_Value(); + } + + return val; +} + +/****************************************************************************************************************************************** +* 函数名称: SFC_GPIOWrite() +* 功能说明: SFC 写入较慢,大量写入时,建议用 GPIO 模拟 SPI 写入 +* 输 入: uint32_t addr 数据要写入到Flash中的地址,字对齐 +* uint32_t buff[] 要写入Flash中的数据 +* uint32_t cnt 要写的数据的个数,以字为单位,最大64 +* 输 出: 无 +* 注意事项: 执行此函数前需要将相应引脚切到 GPIO 功能,使用完后再次将相应引脚切换回 SFC 功能,以便使用 SFC 擦除、读取功能 +******************************************************************************************************************************************/ +void SFC_GPIOWrite(uint32_t addr, uint32_t buff[], uint32_t cnt) +{ + IOSPI_CS_Low(); + IOSPI_ReadWrite(SFC_CMD_WRITE_ENABLE); + IOSPI_CS_High(); + + IOSPI_CS_Low(); + IOSPI_ReadWrite(SFC_CMD_PAGE_PROGRAM); + IOSPI_ReadWrite(addr >> 16); + IOSPI_ReadWrite(addr >> 8); + IOSPI_ReadWrite(addr); + + for(int i = 0; i < cnt * 4; i++) + { + IOSPI_ReadWrite(((uint8_t *)buff)[i]); + } + IOSPI_CS_High(); + + int busy; + do { + IOSPI_CS_Low(); + IOSPI_ReadWrite(SFC_CMD_READ_STATUS_REG1); + busy = IOSPI_ReadWrite(0xFF) & (1 << SFC_STATUS_REG_BUSY_Pos); + IOSPI_CS_High(); + } while(busy); +} + + +/****************************************************************************************************************************************** +* 函数名称: SFC_Read() +* 功能说明: SPI Flash数据读取 +* 输 入: uint32_t addr 要读取的数据在Flash中的地址,字对齐 +* uint32_t buff[] 读取到的数据存入buff指向的内存 +* uint32_t cnt 要读取的数据的个数,以字为单位 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SFC_Read(uint32_t addr, uint32_t buff[], uint32_t cnt) +{ + for(int i = 0; i < cnt; i++) + buff[i] = *((volatile unsigned int *)(0x70000000+addr+i*4)); +} + + +/****************************************************************************************************************************************** +* 函数名称: SFC_ReadStatusReg() +* 功能说明: SPI Flash读取状态寄存器 +* 输 入: uint8_t cmd 读取使用的命令码 +* 输 出: uint8_t 读到的状态寄存器值 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint8_t SFC_ReadStatusReg(uint8_t cmd) +{ + SFC->CFG &= ~SFC_CFG_CMDTYPE_Msk; + SFC->CFG |= (1 << SFC_CFG_CMDWREN_Pos) | + (1 << SFC_CFG_CMDTYPE_Pos); + SFC->CMD = cmd; + + SFC->GO = 1; + __DSB(); __ISB(); + while(SFC->GO) __NOP(); + + return SFC->DATA; +} + + +/****************************************************************************************************************************************** +* 函数名称: SFC_WriteStatusReg() +* 功能说明: SPI Flash写入状态寄存器 +* 输 入: uint8_t cmd 写入使用的命令码 +* uint16_t reg 要写入的状态寄存器值 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SFC_WriteStatusReg(uint8_t cmd, uint16_t reg) +{ + SFC->CFG &= ~SFC_CFG_CMDTYPE_Msk; + SFC->CFG |= (1 << SFC_CFG_WREN_Pos) | + (1 << SFC_CFG_CMDWREN_Pos) | + (6 << SFC_CFG_CMDTYPE_Pos); + SFC->CMD = cmd; + + SFC->DATA = reg; + + SFC->GO = 1; + __DSB(); __ISB(); + while(SFC->GO) __NOP(); +} + + +/****************************************************************************************************************************************** +* 函数名称: SFC_QuadSwitch() +* 功能说明: SPI Flash Quad模式开关 +* 输 入: uint8_t on 1 开启 Quad 模式 0 关闭 Quad 模式 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SFC_QuadSwitch(uint8_t on) +{ + uint16_t reg = (SFC_ReadStatusReg(SFC_CMD_READ_STATUS_REG2) << 8) | + (SFC_ReadStatusReg(SFC_CMD_READ_STATUS_REG1) << 0); + + if(on) + reg |= (1 << SFC_STATUS_REG_QUAD_Pos); + else + reg &=~(1 << SFC_STATUS_REG_QUAD_Pos); + + SFC_WriteStatusReg(SFC_CMD_WRITE_STATUS_REG1, reg); +} + + +/****************************************************************************************************************************************** +* 函数名称: SFC_QuadState() +* 功能说明: SPI Flash Quad模式开关状态查询 +* 输 入: 无 +* 输 出: 1 Quad 模式开启 0 Quad 模式关闭 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint8_t SFC_QuadState(void) +{ + uint8_t reg = SFC_ReadStatusReg(SFC_CMD_READ_STATUS_REG2); + + if(reg & (1 << (SFC_STATUS_REG_QUAD_Pos - 8))) + return 1; + else + return 0; +} + +/****************************************************************************************************************************************** +* 函数名称: SFC_FlashBusy() +* 功能说明: SPI Flash Page Program、Sector Erase、Block Erase、Chip Erase 忙查询 +* 输 入: 无 +* 输 出: 1 Flash 正在执行 Erase/Write 操作 0 Flash 已完成 Erase/Write 操作 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint8_t SFC_FlashBusy(void) +{ + uint8_t reg = SFC_ReadStatusReg(SFC_CMD_READ_STATUS_REG1); + + if(reg & (1 << SFC_STATUS_REG_BUSY_Pos)) + return 1; + else + return 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sfc.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sfc.h new file mode 100644 index 0000000000..0df602766a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sfc.h @@ -0,0 +1,62 @@ +#ifndef __SWM341_SFC_H__ +#define __SWM341_SFC_H__ + + +typedef struct { + uint8_t ClkDiv; //SPI_SCLK是系统时钟的几分频,取值:SFC_CLKDIV_1、SFC_CLKDIV_2、SFC_CLKDIV_4、SFC_CLKDIV_8 + uint8_t Cmd_Read; //读取SPI Flash用的指令码 + uint8_t Width_Read; //读取SPI Flash时数据线位数,取值SFC_RDWIDTH_1、SFC_RDWIDTH_2、SFC_RDWIDTH_4 + uint8_t Cmd_PageProgram; //页编程SPI Flash用的指令码 + uint8_t Width_PageProgram; //页编程SPI Flash时数据线位数,取值SFC_PPWIDTH_1、SFC_PPWIDTH_4 +} SFC_InitStructure; + + +#define SFC_CLKDIV_1 0 +#define SFC_CLKDIV_2 1 +#define SFC_CLKDIV_4 2 +#define SFC_CLKDIV_8 3 + +#define SFC_RDWIDTH_1 0 +#define SFC_RDWIDTH_2 1 +#define SFC_RDWIDTH_4 2 + +#define SFC_PPWIDTH_1 0 +#define SFC_PPWIDTH_4 1 + + +#define SFC_CMD_READ_JEDEC 0x9F +#define SFC_CMD_ERASE_CHIP 0x60 +#define SFC_CMD_WRITE_ENABLE 0x06 +#define SFC_CMD_PAGE_PROGRAM 0x02 +#define SFC_CMD_ERASE_SECTOR 0x20 +#define SFC_CMD_ERASE_BLOCK32KB 0x52 +#define SFC_CMD_ERASE_BLOCK64KB 0xD8 //W25Q32 +#define SFC_CMD_READ_STATUS_REG1 0x05 +#define SFC_CMD_READ_STATUS_REG2 0x35 +#define SFC_CMD_READ_STATUS_REG3 0x15 +#define SFC_CMD_WRITE_STATUS_REG1 0x01 +#define SFC_CMD_WRITE_STATUS_REG2 0x31 +#define SFC_CMD_WRITE_STATUS_REG3 0x11 + + +#define SFC_STATUS_REG_BUSY_Pos 0 +#define SFC_STATUS_REG_QUAD_Pos 9 + + +void SFC_Init(SFC_InitStructure * initStruct); +uint32_t SFC_ReadJEDEC(void); +void SFC_Erase(uint32_t addr, uint8_t wait); +void SFC_EraseEx(uint32_t addr, uint8_t cmd, uint8_t wait); +void SFC_Write(uint32_t addr, uint32_t buff[], uint32_t cnt); +void SFC_GPIOWrite(uint32_t addr, uint32_t buff[], uint32_t cnt); +void SFC_Read(uint32_t addr, uint32_t buff[], uint32_t cnt); + + +uint8_t SFC_ReadStatusReg(uint8_t cmd); +void SFC_WriteStatusReg(uint8_t cmd, uint16_t reg); +void SFC_QuadSwitch(uint8_t on); +uint8_t SFC_QuadState(void); +uint8_t SFC_FlashBusy(void); + + +#endif //__SWM341_SFC_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sleep.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sleep.c new file mode 100644 index 0000000000..db960a3bb7 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sleep.c @@ -0,0 +1,92 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_sleep.c +* 功能说明: SWM341单片机的Sleep功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_sleep.h" + + +#if defined ( __CC_ARM ) + +/* 进入休眠Sleep模式的代码指令,生成这段儿指令的C代码是: +void EnterSleepMode(void) +{ + __NOP();__NOP();__NOP(); + SYS->SLEEP |= (1 << SYS_SLEEP_SLEEP_Pos); +} +*/ +uint16_t Code_EnterSleepMode[] = { + 0xBF00, 0xBF00, 0xBF00, 0x2001, 0x0780, 0x6901, 0x2201, 0x4311, + 0x6101, 0x4770, +}; + +__asm void EnterSleepMode(void) +{ + IMPORT Code_EnterSleepMode + PUSH {LR} + NOP + LDR R0,=Code_EnterSleepMode + ADDS R0, R0, #1 + NOP + BLX R0 + POP {R0} + BX R0 +} + + +/* 进入休眠Stop模式的代码指令,生成这段儿指令的C代码是: +void EnterStopMode(void) +{ + __NOP();__NOP();__NOP(); + SYS->SLEEP |= (1 << SYS_SLEEP_STOP_Pos); +} +*/ +uint16_t Code_EnterStopMode[] = { + 0xBF00, 0xBF00, 0xBF00, 0x2001, 0x0780, 0x6901, 0x2202, 0x4311, + 0x6101, 0x4770, +}; + +__asm void EnterStopMode(void) +{ + IMPORT Code_EnterStopMode + PUSH {LR} + NOP + LDR R0,=Code_EnterStopMode + ADDS R0, R0, #1 + NOP + BLX R0 + POP {R0} + BX R0 +} + +#elif defined ( __ICCARM__ ) + +__ramfunc void EnterSleepMode(void) +{ + __NOP();__NOP();__NOP(); + SYS->SLEEP |= (1 << SYS_SLEEP_SLEEP_Pos); +} + +__ramfunc void EnterStopMode(void) +{ + __NOP();__NOP();__NOP(); + SYS->SLEEP |= (1 << SYS_SLEEP_STOP_Pos); +} + +#endif diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sleep.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sleep.h new file mode 100644 index 0000000000..8bae2895cb --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_sleep.h @@ -0,0 +1,18 @@ +#ifndef __SWM341_SLEEP_H__ +#define __SWM341_SLEEP_H__ + + +#if defined ( __CC_ARM ) + +__asm void EnterSleepMode(void); +__asm void EnterStopMode(void); + +#elif defined ( __ICCARM__ ) + +__ramfunc void EnterSleepMode(void); +__ramfunc void EnterStopMode(void); + +#endif + + +#endif //__SWM341_SLEEP_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_spi.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_spi.c new file mode 100644 index 0000000000..226e6d6b37 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_spi.c @@ -0,0 +1,384 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_spi.c +* 功能说明: SWM341单片机的SPI功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_spi.h" + + +/****************************************************************************************************************************************** +* 函数名称: SPI_Init() +* 功能说明: SPI同步串行接口初始化,包括帧长度设定、时序设定、速度设定、中断设定、FIFO触发设定 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* SPI_InitStructure * initStruct 包含SPI相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_Init(SPI_TypeDef * SPIx, SPI_InitStructure * initStruct) +{ + uint32_t fast = 0, no_sync = 0; + + switch((uint32_t)SPIx) + { + case ((uint32_t)SPI0): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_SPI0_Pos); + break; + + case ((uint32_t)SPI1): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_SPI1_Pos); + break; + } + + SPI_Close(SPIx); //一些关键寄存器只能在SPI关闭时设置 + + if(initStruct->clkDiv == SPI_CLKDIV_2) + { + fast = 1; + no_sync = 1; + } + else if(initStruct->clkDiv == SPI_CLKDIV_4) + { + no_sync = 1; + } + + SPIx->CTRL &= ~(SPI_CTRL_FFS_Msk | SPI_CTRL_CPHA_Msk | SPI_CTRL_CPOL_Msk | SPI_CTRL_SIZE_Msk | SPI_CTRL_MSTR_Msk | SPI_CTRL_FAST_Msk | SPI_CTRL_NSYNC_Msk | + SPI_CTRL_CLKDIV_Msk | SPI_CTRL_SSN_H_Msk | SPI_CTRL_RFTHR_Msk | SPI_CTRL_TFTHR_Msk); + SPIx->CTRL |= (initStruct->FrameFormat << SPI_CTRL_FFS_Pos) | + (initStruct->SampleEdge << SPI_CTRL_CPHA_Pos) | + (initStruct->IdleLevel << SPI_CTRL_CPOL_Pos) | + ((initStruct->WordSize-1) << SPI_CTRL_SIZE_Pos) | + (initStruct->Master << SPI_CTRL_MSTR_Pos) | + (fast << SPI_CTRL_FAST_Pos) | + (no_sync << SPI_CTRL_NSYNC_Pos) | + ((initStruct->clkDiv & 7) << SPI_CTRL_CLKDIV_Pos) | + (0 << SPI_CTRL_SSN_H_Pos) | + ((initStruct->RXThreshold > 0 ? initStruct->RXThreshold-1 : 0) << SPI_CTRL_RFTHR_Pos) | + (initStruct->TXThreshold << SPI_CTRL_TFTHR_Pos) | + (1 << SPI_CTRL_RFCLR_Pos) | + (1 << SPI_CTRL_TFCLR_Pos); + SPIx->CTRL &= ~(SPI_CTRL_RFCLR_Msk | SPI_CTRL_TFCLR_Msk); + + SPIx->IF = 0x37F; //清除中断标志 + SPIx->IE = 0x000; + SPIx->IE |= (initStruct->RXThresholdIEn << SPI_IE_RFTHR_Pos) | + (initStruct->TXThresholdIEn << SPI_IE_TFTHR_Pos) | + (initStruct->TXCompleteIEn << SPI_IE_FTC_Pos); + + switch((uint32_t)SPIx) + { + case ((uint32_t)SPI0): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TXCompleteIEn) + { + NVIC_EnableIRQ(SPI0_IRQn); + } + else + { + NVIC_DisableIRQ(SPI0_IRQn); + } + break; + + case ((uint32_t)SPI1): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TXCompleteIEn) + { + NVIC_EnableIRQ(SPI1_IRQn); + } + else + { + NVIC_DisableIRQ(SPI1_IRQn); + } + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_Open() +* 功能说明: SPI打开,允许收发 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_Open(SPI_TypeDef * SPIx) +{ + SPIx->CTRL |= (0x01 << SPI_CTRL_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_Close() +* 功能说明: SPI关闭,禁止收发 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_Close(SPI_TypeDef * SPIx) +{ + SPIx->CTRL &= ~SPI_CTRL_EN_Msk; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_Read() +* 功能说明: 读取一个数据 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: uint32_t 读取到的数据 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SPI_Read(SPI_TypeDef * SPIx) +{ + return SPIx->DATA; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_Write() +* 功能说明: 写入一个数据 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* uint32_t 要写入的数据 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_Write(SPI_TypeDef * SPIx, uint32_t data) +{ + SPIx->DATA = data; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_WriteWithWait() +* 功能说明: 写入一个数据并等待数据完全发送出去 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1、SPI1 +* uint32_t 要写入的数据 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_WriteWithWait(SPI_TypeDef * SPIx, uint32_t data) +{ + SPIx->STAT |= (1 << SPI_STAT_WTC_Pos); + + SPIx->DATA = data; + + while((SPIx->STAT & SPI_STAT_WTC_Msk) == 0); +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_ReadWrite() +* 功能说明: 发送一个数据,并返回发送过程中接收到的 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* uint32_t data 要发送的数据 +* 输 出: uint32_t 接收到的数据 +* 注意事项: 对于同一个SPI模块,此函数不应与SPI_Write()混着用,因为SPI_Write()不清除SPI_STAT_RFNE状态 +******************************************************************************************************************************************/ +uint32_t SPI_ReadWrite(SPI_TypeDef * SPIx, uint32_t data) +{ + SPIx->DATA = data; + while(!(SPIx->STAT & SPI_STAT_RFNE_Msk)); + + return SPIx->DATA; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_IsRXEmpty() +* 功能说明: 接收FIFO是否空,如果不空则可以继续SPI_Read() +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 接收FIFO空 0 接收FIFO非空 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SPI_IsRXEmpty(SPI_TypeDef * SPIx) +{ + return (SPIx->STAT & SPI_STAT_RFNE_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_IsTXFull() +* 功能说明: 发送FIFO是否满,如果不满则可以继续SPI_Write() +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO满 0 发送FIFO不满 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SPI_IsTXFull(SPI_TypeDef * SPIx) +{ + return (SPIx->STAT & SPI_STAT_TFNF_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_IsTXEmpty() +* 功能说明: 发送FIFO是否空 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: uint32_t 1 发送FIFO空 0 发送FIFO非空 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SPI_IsTXEmpty(SPI_TypeDef * SPIx) +{ + return (SPIx->STAT & SPI_STAT_TFE_Msk) ? 1 : 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: SPI_INTEn() +* 功能说明: 中断使能 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* uint32_t it interrupt type,有效值SPI_IT_RX_OVF、SPI_IT_RX_FULL、SPI_IT_RX_HFULL、SPI_IT_TX_EMPTY、SPI_IT_TX_HFULL、 +* SPI_IT_RX_THRES、SPI_IT_TX_THRES、SPI_IT_TX_DONE、SPI_IT_CS_FALL、SPI_IT_CS_RISE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_INTEn(SPI_TypeDef * SPIx, uint32_t it) +{ + SPIx->IE |= it; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_INTDis() +* 功能说明: 中断禁止 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* uint32_t it interrupt type,有效值SPI_IT_RX_OVF、SPI_IT_RX_FULL、SPI_IT_RX_HFULL、SPI_IT_TX_EMPTY、SPI_IT_TX_HFULL、 +* SPI_IT_RX_THRES、SPI_IT_TX_THRES、SPI_IT_TX_DONE、SPI_IT_CS_FALL、SPI_IT_CS_RISE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_INTDis(SPI_TypeDef * SPIx, uint32_t it) +{ + SPIx->IE &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_INTClr() +* 功能说明: 中断标志清除 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* uint32_t it interrupt type,有效值SPI_IT_RX_OVF、SPI_IT_RX_FULL、SPI_IT_RX_HFULL、SPI_IT_TX_EMPTY、SPI_IT_TX_HFULL、 +* SPI_IT_RX_THRES、SPI_IT_TX_THRES、SPI_IT_TX_DONE、SPI_IT_CS_FALL、SPI_IT_CS_RISE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void SPI_INTClr(SPI_TypeDef * SPIx, uint32_t it) +{ + SPIx->IF = it; +} + +/****************************************************************************************************************************************** +* 函数名称: SPI_INTStat() +* 功能说明: 中断状态查询 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* uint32_t it interrupt type,有效值SPI_IT_RX_OVF、SPI_IT_RX_FULL、SPI_IT_RX_HFULL、SPI_IT_TX_EMPTY、SPI_IT_TX_HFULL、 +* SPI_IT_RX_THRES、SPI_IT_TX_THRES、SPI_IT_TX_DONE、SPI_IT_CS_FALL、SPI_IT_CS_RISE 及其“或” +* 输 出: uint32_t 1 中断发生 0 中断未发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t SPI_INTStat(SPI_TypeDef * SPIx, uint32_t it) +{ + return (SPIx->IF & it) ? 1 : 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: I2S_Init() +* 功能说明: I2S音频串行接口初始化,包括帧格式、数据长度、时钟频率、中断设定、FIFO触发设定 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* I2S_InitStructure * initStruct 包含I2S相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2S_Init(SPI_TypeDef * SPIx, I2S_InitStructure * initStruct) +{ + switch((uint32_t)SPIx) + { + case ((uint32_t)SPI0): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_SPI0_Pos); + break; + + case ((uint32_t)SPI1): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_SPI1_Pos); + break; + } + + I2S_Close(SPIx); //一些关键寄存器只能在SPI关闭时设置 + + SPIx->CTRL &= ~(SPI_CTRL_FFS_Msk | SPI_CTRL_RFTHR_Msk | SPI_CTRL_TFTHR_Msk); + SPIx->CTRL |= (SPI_FORMAT_I2S << SPI_CTRL_FFS_Pos) | + ((initStruct->RXThreshold > 0 ? initStruct->RXThreshold-1 : 0) << SPI_CTRL_RFTHR_Pos) | + (initStruct->TXThreshold << SPI_CTRL_TFTHR_Pos) | + (1 << SPI_CTRL_RFCLR_Pos) | + (1 << SPI_CTRL_TFCLR_Pos); + SPIx->CTRL &= ~(SPI_CTRL_RFCLR_Msk | SPI_CTRL_TFCLR_Msk); + + SPIx->I2SCR &= ~(SPI_I2SCR_MSTR_Msk | SPI_I2SCR_DIEN_Msk | SPI_I2SCR_DOEN_Msk | SPI_I2SCR_FFMT_Msk | SPI_I2SCR_DLEN_Msk | SPI_I2SCR_CHLEN_Msk | SPI_I2SCR_PCMSYNW_Msk); + SPIx->I2SCR |= ((initStruct->Mode & 0x04 ? 1 : 0) << SPI_I2SCR_MSTR_Pos) | + ((initStruct->Mode & 0x02 ? 1 : 0) << SPI_I2SCR_DOEN_Pos) | + ((initStruct->Mode & 0x01 ? 1 : 0) << SPI_I2SCR_DIEN_Pos) | + ((initStruct->FrameFormat & 0x03) << SPI_I2SCR_FFMT_Pos) | + (initStruct->DataLen << SPI_I2SCR_DLEN_Pos) | + (initStruct->ChannelLen << SPI_I2SCR_CHLEN_Pos) | + ((initStruct->FrameFormat & 0x04 ? 1 : 0) << SPI_I2SCR_PCMSYNW_Pos); + + SPIx->I2SPR &= ~SPI_I2SPR_SCLKDIV_Msk; + SPIx->I2SPR |= (SystemCoreClock / initStruct->ClkFreq / 2 - 1) << SPI_I2SPR_SCLKDIV_Pos; + + SPIx->IF = 0x37F; //清除中断标志 + SPIx->IE = 0x000; + SPIx->IE |= (initStruct->RXThresholdIEn << SPI_IE_RFTHR_Pos) | + (initStruct->TXThresholdIEn << SPI_IE_TFTHR_Pos) | + (initStruct->TXCompleteIEn << SPI_IE_FTC_Pos); + + switch((uint32_t)SPIx) + { + case ((uint32_t)SPI0): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TXCompleteIEn) + { + NVIC_EnableIRQ(SPI0_IRQn); + } + else + { + NVIC_DisableIRQ(SPI0_IRQn); + } + break; + + case ((uint32_t)SPI1): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TXCompleteIEn) + { + NVIC_EnableIRQ(SPI1_IRQn); + } + else + { + NVIC_DisableIRQ(SPI1_IRQn); + } + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: I2S_Open() +* 功能说明: I2S打开,允许收发 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2S_Open(SPI_TypeDef * SPIx) +{ + SPIx->CTRL |= (0x01 << SPI_CTRL_EN_Pos); //使能SPI才能使用TX Complete中断 + SPIx->I2SCR |= (0x01 << SPI_I2SCR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: I2S_Close() +* 功能说明: I2S关闭,禁止收发 +* 输 入: SPI_TypeDef * SPIx 指定要被设置的SPI,有效值包括SPI0、SPI1 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void I2S_Close(SPI_TypeDef * SPIx) +{ + SPIx->CTRL &= ~SPI_CTRL_EN_Msk; + SPIx->I2SCR &= ~SPI_I2SCR_EN_Msk; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_spi.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_spi.h new file mode 100644 index 0000000000..a7e733c6db --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_spi.h @@ -0,0 +1,117 @@ +#ifndef __SWM341_SPI_H__ +#define __SWM341_SPI_H__ + +typedef struct { + uint8_t FrameFormat; //帧格式:SPI_FORMAT_SPI、SPI_FORMAT_TI_SSI + uint8_t SampleEdge; //在SPI帧格式下,选择数据采样边沿:SPI_FIRST_EDGE、SPI_SECOND_EDGE + uint8_t IdleLevel; //在SPI帧格式下,选择空闲时(无数据传输时)时钟线的电平:SPI_LOW_LEVEL、SPI_HIGH_LEVEL + uint8_t WordSize; //字长度, 有效值4-16 + uint8_t Master; //1 主机模式 0 从机模式 + uint8_t clkDiv; //SPI_CLK = SYS_CLK / clkDiv,有效值:SPI_CLKDIV_4、SPI_CLKDIV_8、... ... 、SPI_CLKDIV_512 + + uint8_t RXThreshold; //取值1--8 + uint8_t RXThresholdIEn;//当RX FIFO中数据个数 >= RXThreshold时触发中断 + + uint8_t TXThreshold; //取值0--7 + uint8_t TXThresholdIEn;//当TX FIFO中数据个数 <= TXThreshold时触发中断 + + uint8_t TXCompleteIEn; //发送FIFO空且发送移位寄存器空中断使能 +} SPI_InitStructure; + +#define SPI_FORMAT_SPI 0 //Motorola SPI 格式 +#define SPI_FORMAT_TI_SSI 1 //TI SSI 格式 +#define SPI_FORMAT_I2S 2 + +#define SPI_FIRST_EDGE 0 //第一个时钟沿开始采样 +#define SPI_SECOND_EDGE 1 //第二个时钟沿开始采样 + +#define SPI_LOW_LEVEL 0 //空闲时时钟线保持低电平 +#define SPI_HIGH_LEVEL 1 //空闲时时钟线保持高电平 + +#define SPI_CLKDIV_2 8 +#define SPI_CLKDIV_4 0 +#define SPI_CLKDIV_8 1 +#define SPI_CLKDIV_16 2 +#define SPI_CLKDIV_32 3 +#define SPI_CLKDIV_64 4 +#define SPI_CLKDIV_128 5 +#define SPI_CLKDIV_256 6 +#define SPI_CLKDIV_512 7 + + +/* Interrupt Type */ +#define SPI_IT_RX_OVF (1 << 0) //RX FIFO Overflow +#define SPI_IT_RX_FULL (1 << 1) //RX FIFO Full +#define SPI_IT_RX_HFULL (1 << 2) //RX FIFO Half Full +#define SPI_IT_TX_EMPTY (1 << 3) //TX FIFO Empty +#define SPI_IT_TX_HFULL (1 << 4) //TX FIFO Half Full +#define SPI_IT_RX_THRES (1 << 5) //RX FIFO Threshold(接收FIFO中数据个数大于CTRL.RFTHR设定值) +#define SPI_IT_TX_THRES (1 << 6) //TX FIFO Threshold(发送FIFO中数据个数小于CTRL.TFTHR设定值) +#define SPI_IT_TX_DONE (1 << 9) //TX Done(发送FIFO空且发送移位寄存器空) +#define SPI_IT_CS_FALL (1 << 10) //从机模式下,CS下降沿中断 +#define SPI_IT_CS_RISE (1 << 11) //从机模式下,CS上升沿中断 + + +void SPI_Init(SPI_TypeDef * SPIx, SPI_InitStructure * initStruct); //SPI初始化 +void SPI_Open(SPI_TypeDef * SPIx); //SPI打开,允许收发 +void SPI_Close(SPI_TypeDef * SPIx); //SPI关闭,禁止收发 + +uint32_t SPI_Read(SPI_TypeDef * SPIx); +void SPI_Write(SPI_TypeDef * SPIx, uint32_t data); +void SPI_WriteWithWait(SPI_TypeDef * SPIx, uint32_t data); +uint32_t SPI_ReadWrite(SPI_TypeDef * SPIx, uint32_t data); + +uint32_t SPI_IsRXEmpty(SPI_TypeDef * SPIx); //接收FIFO是否空,如果不空则可以继续SPI_Read() +uint32_t SPI_IsTXFull(SPI_TypeDef * SPIx); //发送FIFO是否满,如果不满则可以继续SPI_Write() +uint32_t SPI_IsTXEmpty(SPI_TypeDef * SPIx); //发送FIFO是否空 + + +void SPI_INTEn(SPI_TypeDef * SPIx, uint32_t it); //中断使能 +void SPI_INTDis(SPI_TypeDef * SPIx, uint32_t it); //中断禁止 +void SPI_INTClr(SPI_TypeDef * SPIx, uint32_t it); //中断标志清除 +uint32_t SPI_INTStat(SPI_TypeDef * SPIx, uint32_t it); //中断状态查询 + + + + +typedef struct { + uint8_t Mode; //I2S_MASTER_TX、I2S_MASTER_RX、I2S_MASTER_TX_RX、I2S_SLAVE_TX、I2S_SLAVE_RX、I2S_SLAVE_TX_RX + uint8_t FrameFormat; //I2S_I2S_PHILIPS、I2S_MSB_JUSTIFIED、I2S_PCM_SHORT、I2S_PCM_LONG0、I2S_PCM_LONG1 + uint8_t ChannelLen; //I2S_CHNNLEN_16、I2S_CHNNLEN_32 + uint8_t DataLen; //I2S_DATALEN_8、I2S_DATALEN_16、I2S_DATALEN_24、I2S_DATALEN_32 + uint32_t ClkFreq; //I2S_SCLK Frequency + + uint8_t RXThreshold; //取值1--8 + uint8_t RXThresholdIEn;//当RX FIFO中数据个数 >= RXThreshold时触发中断 + + uint8_t TXThreshold; //取值0--7 + uint8_t TXThresholdIEn;//当TX FIFO中数据个数 <= TXThreshold时触发中断 + + uint8_t TXCompleteIEn; //发送FIFO空且发送移位寄存器空中断使能 +} I2S_InitStructure; + +#define I2S_MASTER_RX 5 +#define I2S_MASTER_TX 6 +#define I2S_SLAVE_RX 1 +#define I2S_SLAVE_TX 2 + +#define I2S_I2S_PHILIPS 0 +#define I2S_MSB_JUSTIFIED 1 +#define I2S_PCM_SHORT 2 +#define I2S_PCM_LONG0 3 //PCM Long Mode Sync Width 1 SCLK period +#define I2S_PCM_LONG1 4 //PCM Long Mode Sync Width 1 Data Length + +#define I2S_CHNNLEN_16 0 +#define I2S_CHNNLEN_32 1 + +#define I2S_DATALEN_8 0 +#define I2S_DATALEN_16 1 +#define I2S_DATALEN_24 2 +#define I2S_DATALEN_32 3 + +void I2S_Init(SPI_TypeDef * SPIx, I2S_InitStructure * initStruct); //I2S初始化 +void I2S_Open(SPI_TypeDef * SPIx); //I2S打开,允许收发 +void I2S_Close(SPI_TypeDef * SPIx); //I2S关闭,禁止收发 + + +#endif //__SWM341_SPI_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_timr.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_timr.c new file mode 100644 index 0000000000..ade65b7f44 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_timr.c @@ -0,0 +1,732 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_timr.c +* 功能说明: SWM341单片机的计数器/定时器功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_timr.h" + + +/****************************************************************************************************************************************** +* 函数名称: TIMR_Init() +* 功能说明: TIMR定时器/计数器初始化 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,有效值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* uint32_t mode 对于TIMR0~4: TIMR_MODE_TIMER、TIMR_MODE_COUNTER、TIMR_MODE_OC、TIMR_MODE_IC +* 对于BTIMR0~11: TIMR_MODE_TIMER、TIMR_MODE_OC +* uint16_t prediv 预分频,取值1-256 +* uint32_t period 定时/计数周期,取值1-16777216 +* uint32_t int_en 中断使能 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_Init(TIMR_TypeDef * TIMRx, uint32_t mode, uint16_t prediv, uint32_t period, uint32_t int_en) +{ + if((TIMRx == TIMR0) || (TIMRx == TIMR1) || (TIMRx == TIMR2) || (TIMRx == TIMR3) || (TIMRx == TIMR4)) + { + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_TIMR_Pos); + } + else + { + SYS->CLKEN1 |= (0x01 << SYS_CLKEN1_BTIMR_Pos); + } + + TIMR_Stop(TIMRx); //一些关键寄存器只能在定时器停止时设置 + + TIMRx->CR &= ~(TIMR_CR_MODE_Msk | TIMR_CR_CLKSRC_Msk); + TIMRx->CR |= (mode << TIMR_CR_CLKSRC_Pos); + + TIMRx->PREDIV = prediv - 1; + + TIMRx->LOAD = period - 1; + + TIMRx->IF = (1 << TIMR_IF_TO_Pos); //清除中断标志 + if(int_en) TIMRx->IE |= (1 << TIMR_IE_TO_Pos); + else TIMRx->IE &= ~(1 << TIMR_IE_TO_Pos); + + switch((uint32_t)TIMRx) + { + case ((uint32_t)TIMR0): + if(int_en) NVIC_EnableIRQ(TIMR0_IRQn); + break; + + case ((uint32_t)TIMR1): + if(int_en) NVIC_EnableIRQ(TIMR1_IRQn); + break; + + case ((uint32_t)TIMR2): + if(int_en) NVIC_EnableIRQ(TIMR2_IRQn); + break; + + case ((uint32_t)TIMR3): + if(int_en) NVIC_EnableIRQ(TIMR3_IRQn); + break; + + case ((uint32_t)TIMR4): + if(int_en) NVIC_EnableIRQ(TIMR4_IRQn); + break; + + case ((uint32_t)BTIMR0): + if(int_en) NVIC_EnableIRQ(BTIMR0_IRQn); + break; + + case ((uint32_t)BTIMR1): + if(int_en) NVIC_EnableIRQ(BTIMR1_IRQn); + break; + + case ((uint32_t)BTIMR2): + if(int_en) NVIC_EnableIRQ(BTIMR2_IRQn); + break; + + case ((uint32_t)BTIMR3): + if(int_en) NVIC_EnableIRQ(BTIMR3_IRQn); + break; + + case ((uint32_t)BTIMR4): + if(int_en) NVIC_EnableIRQ(BTIMR4_IRQn); + break; + + case ((uint32_t)BTIMR5): + if(int_en) NVIC_EnableIRQ(BTIMR5_IRQn); + break; + + case ((uint32_t)BTIMR6): + if(int_en) NVIC_EnableIRQ(BTIMR6_IRQn); + break; + + case ((uint32_t)BTIMR7): + if(int_en) NVIC_EnableIRQ(BTIMR7_IRQn); + break; + + case ((uint32_t)BTIMR8): + if(int_en) NVIC_EnableIRQ(BTIMR8_IRQn); + break; + + case ((uint32_t)BTIMR9): + if(int_en) NVIC_EnableIRQ(BTIMR9_IRQn); + break; + + case ((uint32_t)BTIMR10): + if(int_en) NVIC_EnableIRQ(BTIMR10_IRQn); + break; + + case ((uint32_t)BTIMR11): + if(int_en) NVIC_EnableIRQ(BTIMR11_IRQn); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_Start() +* 功能说明: 启动定时器,从初始值开始计时/计数 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_Start(TIMR_TypeDef * TIMRx) +{ + switch((uint32_t)TIMRx) + { + case ((uint32_t)TIMR0): + TIMRG->EN |= (1 << TIMRG_EN_TIMR0_Pos); + break; + + case ((uint32_t)TIMR1): + TIMRG->EN |= (1 << TIMRG_EN_TIMR1_Pos); + break; + + case ((uint32_t)TIMR2): + TIMRG->EN |= (1 << TIMRG_EN_TIMR2_Pos); + break; + + case ((uint32_t)TIMR3): + TIMRG->EN |= (1 << TIMRG_EN_TIMR3_Pos); + break; + + case ((uint32_t)TIMR4): + TIMRG->EN |= (1 << TIMRG_EN_TIMR4_Pos); + break; + + case ((uint32_t)BTIMR0): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR0_Pos); + break; + + case ((uint32_t)BTIMR1): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR1_Pos); + break; + + case ((uint32_t)BTIMR2): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR2_Pos); + break; + + case ((uint32_t)BTIMR3): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR3_Pos); + break; + + case ((uint32_t)BTIMR4): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR4_Pos); + break; + + case ((uint32_t)BTIMR5): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR5_Pos); + break; + + case ((uint32_t)BTIMR6): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR6_Pos); + break; + + case ((uint32_t)BTIMR7): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR7_Pos); + break; + + case ((uint32_t)BTIMR8): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR8_Pos); + break; + + case ((uint32_t)BTIMR9): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR9_Pos); + break; + + case ((uint32_t)BTIMR10): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR10_Pos); + break; + + case ((uint32_t)BTIMR11): + BTIMRG->EN |= (1 << TIMRG_EN_TIMR11_Pos); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_Stop() +* 功能说明: 停止定时器 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_Stop(TIMR_TypeDef * TIMRx) +{ + switch((uint32_t)TIMRx) + { + case ((uint32_t)TIMR0): + TIMRG->EN &= ~(1 << TIMRG_EN_TIMR0_Pos); + break; + + case ((uint32_t)TIMR1): + TIMRG->EN &= ~(1 << TIMRG_EN_TIMR1_Pos); + break; + + case ((uint32_t)TIMR2): + TIMRG->EN &= ~(1 << TIMRG_EN_TIMR2_Pos); + break; + + case ((uint32_t)TIMR3): + TIMRG->EN &= ~(1 << TIMRG_EN_TIMR3_Pos); + break; + + case ((uint32_t)TIMR4): + TIMRG->EN &= ~(1 << TIMRG_EN_TIMR4_Pos); + break; + + case ((uint32_t)BTIMR0): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR0_Pos); + break; + + case ((uint32_t)BTIMR1): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR1_Pos); + break; + + case ((uint32_t)BTIMR2): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR2_Pos); + break; + + case ((uint32_t)BTIMR3): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR3_Pos); + break; + + case ((uint32_t)BTIMR4): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR4_Pos); + break; + + case ((uint32_t)BTIMR5): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR5_Pos); + break; + + case ((uint32_t)BTIMR6): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR6_Pos); + break; + + case ((uint32_t)BTIMR7): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR7_Pos); + break; + + case ((uint32_t)BTIMR8): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR8_Pos); + break; + + case ((uint32_t)BTIMR9): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR9_Pos); + break; + + case ((uint32_t)BTIMR10): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR10_Pos); + break; + + case ((uint32_t)BTIMR11): + BTIMRG->EN &= ~(1 << TIMRG_EN_TIMR11_Pos); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_Halt() +* 功能说明: 暂停定时器,计数值保持不变 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_Halt(TIMR_TypeDef * TIMRx) +{ + TIMRx->HALT = 1; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_Resume() +* 功能说明: 恢复定时器,从暂停处继续计数 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_Resume(TIMR_TypeDef * TIMRx) +{ + TIMRx->HALT = 0; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_GetCurValue() +* 功能说明: 获取当前计数值 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: uint32_t 当前计数值 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_GetCurValue(TIMR_TypeDef * TIMRx) +{ + return TIMRx->VALUE; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_INTEn() +* 功能说明: 使能中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_INTEn(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE |= (1 << TIMR_IE_TO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_INTDis() +* 功能说明: 禁能中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_INTDis(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE &= ~(1 << TIMR_IE_TO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_INTClr() +* 功能说明: 清除中断标志 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_INTClr(TIMR_TypeDef * TIMRx) +{ + TIMRx->IF = (1 << TIMR_IF_TO_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_INTStat() +* 功能说明: 获取中断状态 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: uint32_t 0 TIMRx未产生中断 1 TIMRx产生了中断 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_INTStat(TIMR_TypeDef * TIMRx) +{ + return (TIMRx->IF & TIMR_IF_TO_Msk) ? 1 : 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_Init() +* 功能说明: 输出比较功能初始化 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* uint32_t match 当计数器的值递减到match时引脚输出电平翻转 +* uint32_t match_int_en 当计数器的值递减到match时是否产生中断 +* uint32_t init_lvl 初始输出电平 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_Init(TIMR_TypeDef * TIMRx, uint32_t match, uint32_t match_int_en, uint32_t init_lvl) +{ + TIMRx->OCMAT = match; + if(init_lvl) TIMRx->OCCR |= (1 << TIMR_OCCR_INITLVL_Pos); + else TIMRx->OCCR &= ~(1 << TIMR_OCCR_INITLVL_Pos); + + TIMRx->IF = (1 << TIMR_IF_OC0_Pos); //清除中断标志 + if(match_int_en) TIMRx->IE |= (1 << TIMR_IE_OC0_Pos); + else TIMRx->IE &= ~(1 << TIMR_IE_OC0_Pos); + + switch((uint32_t)TIMRx) + { + case ((uint32_t)TIMR0): + if(match_int_en) NVIC_EnableIRQ(TIMR0_IRQn); + break; + + case ((uint32_t)TIMR1): + if(match_int_en) NVIC_EnableIRQ(TIMR1_IRQn); + break; + + case ((uint32_t)TIMR2): + if(match_int_en) NVIC_EnableIRQ(TIMR2_IRQn); + break; + + case ((uint32_t)TIMR3): + if(match_int_en) NVIC_EnableIRQ(TIMR3_IRQn); + break; + + case ((uint32_t)TIMR4): + if(match_int_en) NVIC_EnableIRQ(TIMR4_IRQn); + break; + + case ((uint32_t)BTIMR0): + if(match_int_en) NVIC_EnableIRQ(BTIMR0_IRQn); + break; + + case ((uint32_t)BTIMR1): + if(match_int_en) NVIC_EnableIRQ(BTIMR1_IRQn); + break; + + case ((uint32_t)BTIMR2): + if(match_int_en) NVIC_EnableIRQ(BTIMR2_IRQn); + break; + + case ((uint32_t)BTIMR3): + if(match_int_en) NVIC_EnableIRQ(BTIMR3_IRQn); + break; + + case ((uint32_t)BTIMR4): + if(match_int_en) NVIC_EnableIRQ(BTIMR4_IRQn); + break; + + case ((uint32_t)BTIMR5): + if(match_int_en) NVIC_EnableIRQ(BTIMR5_IRQn); + break; + + case ((uint32_t)BTIMR6): + if(match_int_en) NVIC_EnableIRQ(BTIMR6_IRQn); + break; + + case ((uint32_t)BTIMR7): + if(match_int_en) NVIC_EnableIRQ(BTIMR7_IRQn); + break; + + case ((uint32_t)BTIMR8): + if(match_int_en) NVIC_EnableIRQ(BTIMR8_IRQn); + break; + + case ((uint32_t)BTIMR9): + if(match_int_en) NVIC_EnableIRQ(BTIMR9_IRQn); + break; + + case ((uint32_t)BTIMR10): + if(match_int_en) NVIC_EnableIRQ(BTIMR10_IRQn); + break; + + case ((uint32_t)BTIMR11): + if(match_int_en) NVIC_EnableIRQ(BTIMR11_IRQn); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_OutputEn() +* 功能说明: 使能输出比较功能的波形输出 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_OutputEn(TIMR_TypeDef * TIMRx) +{ + TIMRx->OCCR &= ~(TIMR_OCCR_FORCEEN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_OutputDis() +* 功能说明: 禁止输出比较功能的波形输出,且让输出比较功能引脚保持level电平 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* uint32_t level 禁止输出波形后在引脚上保持的电平 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_OutputDis(TIMR_TypeDef * TIMRx, uint32_t level) +{ + if(level) TIMRx->OCCR |= (1 << TIMR_OCCR_FORCELVL_Pos); + else TIMRx->OCCR &= ~(1 << TIMR_OCCR_FORCELVL_Pos); + + TIMRx->OCCR |= (TIMR_OCCR_FORCEEN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_SetMatch() +* 功能说明: 设置输出比较功能的比较值 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* uint32_t match 输出比较功能的比较值 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_SetMatch(TIMR_TypeDef * TIMRx, uint32_t match) +{ + TIMRx->OCMAT = match; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_GetMatch() +* 功能说明: 获取输出比较功能的比较值 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: uint32_t 输出比较功能的比较值 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_OC_GetMatch(TIMR_TypeDef * TIMRx) +{ + return TIMRx->OCMAT; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_INTEn() +* 功能说明: 使能输出比较中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_INTEn(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE |= (1 << TIMR_IE_OC0_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_INTDis() +* 功能说明: 禁能输出比较中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_INTDis(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE &= ~(1 << TIMR_IE_OC0_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_INTClr() +* 功能说明: 清除输出比较中断标志 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_OC_INTClr(TIMR_TypeDef * TIMRx) +{ + TIMRx->IF = (1 << TIMR_IF_OC0_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_OC_INTStat() +* 功能说明: 获取输出比较中断状态 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4、BTIMR0、BTIMR1、...、BTIMR11 +* 输 出: uint32_t 0 输出比较match未发生 1 输出比较match发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_OC_INTStat(TIMR_TypeDef * TIMRx) +{ + return (TIMRx->IF & TIMR_IF_OC0_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_Init() +* 功能说明: 输入捕获功能初始化 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* uint32_t captureH_int_en 测量高电平长度完成中断使能 +* uint32_t captureL_int_en 测量低电平长度完成中断使能 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_Init(TIMR_TypeDef * TIMRx, uint32_t captureH_int_en, uint32_t captureL_int_en) +{ + TIMRx->IF = (TIMR_IF_ICR_Msk | TIMR_IF_ICF_Msk); + if(captureH_int_en) TIMRx->IE |= (1 << TIMR_IE_ICF_Pos); + else TIMRx->IE &= ~(1 << TIMR_IE_ICF_Pos); + if(captureL_int_en) TIMRx->IE |= (1 << TIMR_IE_ICR_Pos); + else TIMRx->IE &= ~(1 << TIMR_IE_ICR_Pos); + + switch((uint32_t)TIMRx) + { + case ((uint32_t)TIMR0): + if(captureH_int_en | captureL_int_en) NVIC_EnableIRQ(TIMR0_IRQn); + break; + + case ((uint32_t)TIMR1): + if(captureH_int_en | captureL_int_en) NVIC_EnableIRQ(TIMR1_IRQn); + break; + + case ((uint32_t)TIMR2): + if(captureH_int_en | captureL_int_en) NVIC_EnableIRQ(TIMR2_IRQn); + break; + + case ((uint32_t)TIMR3): + if(captureH_int_en | captureL_int_en) NVIC_EnableIRQ(TIMR3_IRQn); + break; + + case ((uint32_t)TIMR4): + if(captureH_int_en | captureL_int_en) NVIC_EnableIRQ(TIMR4_IRQn); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_GetCaptureH() +* 功能说明: 获取高电平长度测量结果 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: uint32_t 高电平长度测量结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_IC_GetCaptureH(TIMR_TypeDef * TIMRx) +{ + return TIMRx->ICHIGH; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_GetCaptureL() +* 功能说明: 获取低电平长度测量结果 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: uint32_t 低电平长度测量结果 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_IC_GetCaptureL(TIMR_TypeDef * TIMRx) +{ + return TIMRx->ICLOW; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureH_INTEn() +* 功能说明: 使能输入捕获高电平长度测量完成中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_CaptureH_INTEn(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE |= (1 << TIMR_IE_ICF_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureH_INTDis() +* 功能说明: 禁能输入捕获高电平长度测量完成中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_CaptureH_INTDis(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE &= ~(1 << TIMR_IE_ICF_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureH_INTClr() +* 功能说明: 清除输入捕获高电平长度测量完成中断标志 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_CaptureH_INTClr(TIMR_TypeDef * TIMRx) +{ + TIMRx->IF = (1 << TIMR_IF_ICF_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureH_INTStat() +* 功能说明: 获取输入捕获高电平长度测量完成中断状态 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: uint32_t 0 高电平长度测量未完成 1 高电平长度测量完成 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_IC_CaptureH_INTStat(TIMR_TypeDef * TIMRx) +{ + return (TIMRx->IF & TIMR_IF_ICF_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureL_INTEn() +* 功能说明: 使能输入捕获低电平长度测量完成中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_CaptureL_INTEn(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE |= (1 << TIMR_IE_ICR_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureL_INTDis() +* 功能说明: 禁能输入捕获低电平长度测量完成中断 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_CaptureL_INTDis(TIMR_TypeDef * TIMRx) +{ + TIMRx->IE &= ~(1 << TIMR_IE_ICR_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureL_INTClr() +* 功能说明: 清除输入捕获低电平长度测量完成中断标志 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void TIMR_IC_CaptureL_INTClr(TIMR_TypeDef * TIMRx) +{ + TIMRx->IF = (1 << TIMR_IF_ICR_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: TIMR_IC_CaptureL_INTStat() +* 功能说明: 获取输入捕获低电平长度测量完成中断状态 +* 输 入: TIMR_TypeDef * TIMRx 指定要被设置的定时器,可取值包括TIMR0、TIMR1、TIMR2、TIMR3、TIMR4 +* 输 出: uint32_t 0 低电平长度测量未完成 1 低电平长度测量完成 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t TIMR_IC_CaptureL_INTStat(TIMR_TypeDef * TIMRx) +{ + return (TIMRx->IF & TIMR_IF_ICR_Msk) ? 1 : 0; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_timr.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_timr.h new file mode 100644 index 0000000000..e8ba4434c7 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_timr.h @@ -0,0 +1,60 @@ +#ifndef __SWM341_TIMR_H__ +#define __SWM341_TIMR_H__ + +#define TIMR_MODE_TIMER ((0 << 2) | 0) +#define TIMR_MODE_IC ((1 << 2) | 0) //输入捕获 +#define TIMR_MODE_OC ((2 << 2) | 0) //输出比较 +#define TIMR_MODE_COUNTER ((0 << 2) | 2) //计数上升沿 + + +void TIMR_Init(TIMR_TypeDef * TIMRx, uint32_t mode, uint16_t prediv, uint32_t period, uint32_t int_en); //定时器/计数器初始化 +void TIMR_Start(TIMR_TypeDef * TIMRx); //启动定时器,从初始值开始计时/计数 +void TIMR_Stop(TIMR_TypeDef * TIMRx); //停止定时器 +void TIMR_Halt(TIMR_TypeDef * TIMRx); //暂停定时器,计数值保持不变 +void TIMR_Resume(TIMR_TypeDef * TIMRx); //恢复定时器,从暂停处继续计数 + +uint32_t TIMR_GetCurValue(TIMR_TypeDef * TIMRx); //获取当前计数值 + +void TIMR_INTEn(TIMR_TypeDef * TIMRx); //使能中断 +void TIMR_INTDis(TIMR_TypeDef * TIMRx); //禁能中断 +void TIMR_INTClr(TIMR_TypeDef * TIMRx); //清除中断标志 +uint32_t TIMR_INTStat(TIMR_TypeDef * TIMRx); //获取中断状态 + + +void TIMR_OC_Init(TIMR_TypeDef * TIMRx, uint32_t match, uint32_t match_int_en, uint32_t init_lvl); + +void TIMR_OC_OutputEn(TIMR_TypeDef * TIMRx); +void TIMR_OC_OutputDis(TIMR_TypeDef * TIMRx, uint32_t level); + +void TIMR_OC_SetMatch(TIMR_TypeDef * TIMRx, uint32_t match); +uint32_t TIMR_OC_GetMatch(TIMR_TypeDef * TIMRx); + +void TIMR_OC_INTEn(TIMR_TypeDef * TIMRx); +void TIMR_OC_INTDis(TIMR_TypeDef * TIMRx); +void TIMR_OC_INTClr(TIMR_TypeDef * TIMRx); +uint32_t TIMR_OC_INTStat(TIMR_TypeDef * TIMRx); + + +void TIMR_IC_Init(TIMR_TypeDef * TIMRx, uint32_t captureH_int_en, uint32_t captureL_int_en); +void TIMR_IC_Start(TIMR_TypeDef * TIMRx); +void TIMR_IC_Start_Multi(uint32_t timr0, uint32_t timr1, uint32_t timr2, uint32_t timr3); +void TIMR_IC_Stop(TIMR_TypeDef * TIMRx); + +uint32_t TIMR_IC_GetCaptureH(TIMR_TypeDef * TIMRx); +uint32_t TIMR_IC_GetCaptureL(TIMR_TypeDef * TIMRx); + +void TIMR_IC_CaptureH_INTEn(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureH_INTDis(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureH_INTClr(TIMR_TypeDef * TIMRx); +uint32_t TIMR_IC_CaptureH_INTStat(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureL_INTEn(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureL_INTDis(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureL_INTClr(TIMR_TypeDef * TIMRx); +uint32_t TIMR_IC_CaptureL_INTStat(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureOV_INTEn(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureOV_INTDis(TIMR_TypeDef * TIMRx); +void TIMR_IC_CaptureOV_INTClr(TIMR_TypeDef * TIMRx); +uint32_t TIMR_IC_CaptureOV_INTStat(TIMR_TypeDef * TIMRx); + + +#endif //__SWM341_TIMR_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_uart.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_uart.c new file mode 100644 index 0000000000..7fcd618279 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_uart.c @@ -0,0 +1,463 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_uart.c +* 功能说明: SWM341单片机的UART串口功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: 没有编写LIN功能相关的函数 +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_uart.h" + + +/****************************************************************************************************************************************** +* 函数名称: UART_Init() +* 功能说明: UART串口初始化 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* UART_InitStructure * initStruct 包含UART串口相关设定值的结构体 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_Init(UART_TypeDef * UARTx, UART_InitStructure * initStruct) +{ + switch((uint32_t)UARTx) + { + case ((uint32_t)UART0): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_UART0_Pos); + break; + + case ((uint32_t)UART1): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_UART1_Pos); + break; + + case ((uint32_t)UART2): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_UART2_Pos); + break; + + case ((uint32_t)UART3): + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_UART3_Pos); + break; + } + + UART_Close(UARTx); //一些关键寄存器只能在串口关闭时设置 + + UARTx->BAUD &= ~(UART_BAUD_BAUD_Msk | UART_BAUD_FRAC_Msk); + UARTx->BAUD |= (((SystemCoreClock/initStruct->Baudrate - 1) / 16) << UART_BAUD_BAUD_Pos) | + (((SystemCoreClock/initStruct->Baudrate - 1) % 16) << UART_BAUD_FRAC_Pos); + + UARTx->CTRL &= ~(UART_CTRL_DATA9b_Msk | UART_CTRL_PARITY_Msk | UART_CTRL_STOP2b_Msk); + UARTx->CTRL |= (initStruct->DataBits << UART_CTRL_DATA9b_Pos) | + (initStruct->Parity << UART_CTRL_PARITY_Pos) | + (initStruct->StopBits << UART_CTRL_STOP2b_Pos); + + UARTx->FIFO &= ~(UART_FIFO_RXTHR_Msk | UART_FIFO_TXTHR_Msk); + UARTx->FIFO |= (initStruct->RXThreshold << UART_FIFO_RXTHR_Pos) | + (initStruct->TXThreshold << UART_FIFO_TXTHR_Pos); + + UARTx->TOCR &= ~UART_TOCR_TIME_Msk; + UARTx->TOCR |= (1 << UART_TOCR_MODE_Pos) | + (initStruct->TimeoutTime << UART_TOCR_TIME_Pos); + + UARTx->CTRL &= ~(UART_CTRL_RXIE_Msk | UART_CTRL_TXIE_Msk | UART_CTRL_TOIE_Msk); + UARTx->CTRL |= (initStruct->RXThresholdIEn << UART_CTRL_RXIE_Pos) | + (initStruct->TXThresholdIEn << UART_CTRL_TXIE_Pos) | + (initStruct->TimeoutIEn << UART_CTRL_TOIE_Pos); + + switch((uint32_t)UARTx) + { + case ((uint32_t)UART0): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TimeoutIEn) + { + NVIC_EnableIRQ(UART0_IRQn); + } + else + { + NVIC_DisableIRQ(UART0_IRQn); + } + break; + + case ((uint32_t)UART1): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TimeoutIEn) + { + NVIC_EnableIRQ(UART1_IRQn); + } + else + { + NVIC_DisableIRQ(UART1_IRQn); + } + break; + + case ((uint32_t)UART2): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TimeoutIEn) + { + NVIC_EnableIRQ(UART2_IRQn); + } + else + { + NVIC_DisableIRQ(UART2_IRQn); + } + break; + + case ((uint32_t)UART3): + if(initStruct->RXThresholdIEn | initStruct->TXThresholdIEn | initStruct->TimeoutIEn) + { + NVIC_EnableIRQ(UART3_IRQn); + } + else + { + NVIC_DisableIRQ(UART3_IRQn); + } + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: UART_Open() +* 功能说明: UART串口打开 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_Open(UART_TypeDef * UARTx) +{ + UARTx->CTRL |= (0x01 << UART_CTRL_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_Close() +* 功能说明: UART串口关闭 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_Close(UART_TypeDef * UARTx) +{ + UARTx->CTRL &= ~(0x01 << UART_CTRL_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_WriteByte() +* 功能说明: 发送一个字节数据 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,可取值包括UART0、UART1、UART2、UART3、UART4 +* uint8_t data 要发送的字节 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_WriteByte(UART_TypeDef * UARTx, uint8_t data) +{ + UARTx->DATA = data; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_ReadByte() +* 功能说明: 读取一个字节数据,并指出数据是否Valid +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,可取值包括UART0、UART1、UART2、UART3、UART4 +* uint32_t * data 接收到的数据 +* 输 出: uint32_t 0 无错误 UART_ERR_PARITY 奇偶校验错误 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_ReadByte(UART_TypeDef * UARTx, uint32_t * data) +{ + uint32_t reg = UARTx->DATA; + + *data = (reg & UART_DATA_DATA_Msk); + + if(reg & UART_DATA_PAERR_Msk) return UART_ERR_PARITY; + + return 0; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_IsTXBusy() +* 功能说明: UART是否正在发送数据 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 UART正在发送数据 0 数据已发完 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_IsTXBusy(UART_TypeDef * UARTx) +{ + return (UARTx->CTRL & UART_CTRL_TXIDLE_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_IsRXFIFOEmpty() +* 功能说明: 接收FIFO是否为空,如果不空则说明其中有数据可以读取 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 接收FIFO空 0 接收FIFO非空 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_IsRXFIFOEmpty(UART_TypeDef * UARTx) +{ + return (UARTx->CTRL & UART_CTRL_RXNE_Msk) ? 0 : 1; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_IsTXFIFOFull() +* 功能说明: 发送FIFO是否为满,如果不满则可以继续向其中写入数据 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 发送FIFO满 0 发送FIFO不满 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_IsTXFIFOFull(UART_TypeDef * UARTx) +{ + return (UARTx->CTRL & UART_CTRL_TXFF_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_SetBaudrate() +* 功能说明: 设置波特率 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t baudrate 要设置的波特率 +* 输 出: 无 +* 注意事项: 不要在串口工作时更改波特率,使用此函数前请先调用UART_Close()关闭串口 +******************************************************************************************************************************************/ +void UART_SetBaudrate(UART_TypeDef * UARTx, uint32_t baudrate) +{ + UARTx->BAUD &= ~(UART_BAUD_BAUD_Msk | UART_BAUD_FRAC_Msk); + UARTx->BAUD |= (((SystemCoreClock/baudrate - 1) / 16) << UART_BAUD_BAUD_Pos) | + (((SystemCoreClock/baudrate - 1) % 16) << UART_BAUD_FRAC_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_GetBaudrate() +* 功能说明: 查询波特率 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 当前波特率 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_GetBaudrate(UART_TypeDef * UARTx) +{ + return SystemCoreClock/(((UARTx->BAUD & UART_BAUD_BAUD_Msk) >> UART_BAUD_BAUD_Pos) * 16 + + ((UARTx->BAUD & UART_BAUD_FRAC_Msk) >> UART_BAUD_FRAC_Pos) + 1); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_CTSConfig() +* 功能说明: UART CTS流控配置 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t enable 1 使能CTS流控 0 禁止CTS流控 +* uint32_t polarity 0 CTS输入为低表示可以发送数据 1 CTS输入为高表示可以发送数据 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_CTSConfig(UART_TypeDef * UARTx, uint32_t enable, uint32_t polarity) +{ + UARTx->CTSCR &= ~(UART_CTSCR_EN_Msk | UART_CTSCR_POL_Msk); + UARTx->CTSCR |= (enable << UART_CTSCR_EN_Pos) | + (polarity << UART_CTSCR_POL_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_CTSLineState() +* 功能说明: UART CTS线当前状态 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 0 CTS线当前为低电平 1 CTS线当前为高电平 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_CTSLineState(UART_TypeDef * UARTx) +{ + return (UARTx->CTSCR & UART_CTSCR_STAT_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_RTSConfig() +* 功能说明: UART RTS流控配置 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t enable 1 使能RTS流控 0 禁止RTS流控 +* uint32_t polarity 0 RTS输出低表示可以接收数据 1 RTS输出高表示可以接收数据 +* uint32_t threshold RTS流控的触发阈值,可取值UART_RTS_1BYTE、UART_RTS_2BYTE、UART_RTS_4BYTE、UART_RTS_6BYTE +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_RTSConfig(UART_TypeDef * UARTx, uint32_t enable, uint32_t polarity, uint32_t threshold) +{ + UARTx->RTSCR &= ~(UART_RTSCR_EN_Msk | UART_RTSCR_POL_Msk | UART_RTSCR_THR_Msk); + UARTx->RTSCR |= (enable << UART_RTSCR_EN_Pos) | + (polarity << UART_RTSCR_POL_Pos) | + (threshold << UART_RTSCR_THR_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_RTSLineState() +* 功能说明: UART RTS线当前状态 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 0 RTS线当前为低电平 1 RTS线当前为高电平 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_RTSLineState(UART_TypeDef * UARTx) +{ + return (UARTx->RTSCR & UART_RTSCR_STAT_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_LINConfig() +* 功能说明: UART LIN功能配置 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t detectedLen 检测到Break需要的低电平长度(位数),取值1--16 +* uint32_t detectedIEn 检测到Break中断使能 +* uint32_t generatedLen Break发送低电平长度,取值1--15 +* uint32_t generatedIEn Break发送完成中断使能 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_LINConfig(UART_TypeDef * UARTx, uint32_t detectedLen, uint32_t detectedIEn, uint32_t generatedLen, uint32_t generatedIEn) +{ + UARTx->CFG &= ~(UART_CFG_BRKTXLEN_Msk | UART_CFG_BRKRXLEN_Msk); + UARTx->CFG |= ((detectedLen-1) << UART_CFG_BRKRXLEN_Pos) | + (generatedLen << UART_CFG_BRKTXLEN_Pos); + UARTx->LINCR &= ~(UART_LINCR_BRKDETIE_Msk | UART_LINCR_GENBRKIE_Msk); + UARTx->LINCR |= (detectedIEn << UART_LINCR_BRKDETIE_Pos) | + (generatedIEn << UART_LINCR_GENBRKIE_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_LINGenerate() +* 功能说明: UART LIN产生/发送Break +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_LINGenerate(UART_TypeDef * UARTx) +{ + UARTx->LINCR |= (1 << UART_LINCR_GENBRK_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_LINIsDetected() +* 功能说明: UART LIN是否检测到Break +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 检测到LIN Break 0 未检测到LIN Break +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_LINIsDetected(UART_TypeDef * UARTx) +{ + return (UARTx->LINCR & UART_LINCR_BRKDETIF_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_LINIsGenerated() +* 功能说明: UART LIN Break是否发送完成 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 1 LIN Break 发送完成 0 LIN Break发送未完成 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_LINIsGenerated(UART_TypeDef * UARTx) +{ + return (UARTx->LINCR & UART_LINCR_GENBRKIF_Msk) ? 1 : 0; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_ABRStart() +* 功能说明: UART 自动波特率检测开始 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t detectChar 用于自动检测、计算波特率的检测字符 +* 8位数据时可取值:0xFF、0xFE、0xF8、0x80,分别表示发送方必须发送0xFF、0xFE、0xF8、0x80 +* 9位数据时可取值:0x1FF、0x1FE、0x1F8、0x180,分别表示发送方必须发送0x1FF、0x1FE、0x1F8、0x180 +* 输 出: 无 +* 注意事项: 自动波特率检测时不能开启奇偶校验 +******************************************************************************************************************************************/ +void UART_ABRStart(UART_TypeDef * UARTx, uint32_t detectChar) +{ + uint32_t bits = 0; + + if((detectChar == 0xFF) || (detectChar == 0x1FF)) bits = 0; + else if((detectChar == 0xFE) || (detectChar == 0x1FE)) bits = 1; + else if((detectChar == 0xF8) || (detectChar == 0x1F8)) bits = 2; + else if((detectChar == 0x80) || (detectChar == 0x180)) bits = 3; + else while(1); + + UARTx->BAUD &= ~(UART_BAUD_ABREN_Msk | UART_BAUD_ABRBIT_Msk); + UARTx->BAUD |= (1 << UART_BAUD_ABREN_Pos) | + (bits << UART_BAUD_ABRBIT_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: UART_ABRIsDone() +* 功能说明: UART 自动波特率是否完成 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* 输 出: uint32_t 0 未完成 UART_ABR_RES_OK 已完成,且成功 UART_ABR_RES_ERR 已完成,但失败、出错 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_ABRIsDone(UART_TypeDef * UARTx) +{ + if(UARTx->BAUD & UART_BAUD_ABREN_Msk) + { + return 0; + } + else if(UARTx->BAUD & UART_BAUD_ABRERR_Msk) + { + return UART_ABR_RES_ERR; + } + else + { + return UART_ABR_RES_OK; + } +} + +/****************************************************************************************************************************************** +* 函数名称: UART_INTEn() +* 功能说明: 中断使能 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t it interrupt type,有效值有 UART_IT_RX_THR、UART_IT_RX_TOUT、UART_IT_TX_THR、UART_IT_TX_DONE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_INTEn(UART_TypeDef * UARTx, uint32_t it) +{ + UARTx->CTRL |= it; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_INTDis() +* 功能说明: 中断禁止 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t it interrupt type,有效值有 UART_IT_RX_THR、UART_IT_RX_TOUT、UART_IT_TX_THR、UART_IT_TX_DONE 及其“或” +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_INTDis(UART_TypeDef * UARTx, uint32_t it) +{ + UARTx->CTRL &= ~it; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_INTClr() +* 功能说明: 中断标志清除 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t it interrupt type,有效值有 UART_IT_RX_TOUT +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void UART_INTClr(UART_TypeDef * UARTx, uint32_t it) +{ + if(it & UART_IT_RX_TOUT) + UARTx->TOCR |= UART_TOCR_IFCLR_Msk; +} + +/****************************************************************************************************************************************** +* 函数名称: UART_INTStat() +* 功能说明: 中断状态查询 +* 输 入: UART_TypeDef * UARTx 指定要被设置的UART串口,有效值包括UART0、UART1、UART2、UART3 +* uint32_t it interrupt type,有效值有 UART_IT_RX_THR、UART_IT_RX_TOUT、UART_IT_TX_THR、UART_IT_TX_DONE 及其“或” +* 输 出: uint32_t 1 中断已发生 0 中断未发生 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t UART_INTStat(UART_TypeDef * UARTx, uint32_t it) +{ + return (((it & UART_IT_RX_THR) && (UARTx->BAUD & UART_BAUD_RXIF_Msk)) || + ((it & UART_IT_RX_TOUT) && (UARTx->BAUD & UART_BAUD_TOIF_Msk)) || + ((it & UART_IT_TX_THR) && (UARTx->BAUD & UART_BAUD_TXIF_Msk)) || + ((it & UART_IT_TX_DONE) && (UARTx->BAUD & UART_BAUD_TXDOIF_Msk))); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_uart.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_uart.h new file mode 100644 index 0000000000..96bbeda416 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_uart.h @@ -0,0 +1,92 @@ +#ifndef __SWM341_UART_H__ +#define __SWM341_UART_H__ + +typedef struct { + uint32_t Baudrate; + + uint8_t DataBits; //数据位位数,可取值UART_DATA_8BIT、UART_DATA_9BIT + + uint8_t Parity; //奇偶校验位,可取值UART_PARITY_NONE、UART_PARITY_ODD、UART_PARITY_EVEN、UART_PARITY_ONE、UART_PARITY_ZERO + + uint8_t StopBits; //停止位位数,可取值UART_STOP_1BIT、UART_STOP_2BIT + + uint8_t RXThreshold; //取值0--7 + uint8_t RXThresholdIEn; //当RX FIFO中数据个数 > RXThreshold时触发中断 + + uint8_t TXThreshold; //取值0--7 + uint8_t TXThresholdIEn; //当TX FIFO中数据个数 <= TXThreshold时触发中断 + + uint8_t TimeoutTime; //超时时长 = TimeoutTime/(Baudrate/10) 秒 + uint8_t TimeoutIEn; //超时中断,超过 TimeoutTime/(Baudrate/10) 秒没有在RX线上接收到数据时触发中断 +} UART_InitStructure; + + +#define UART_DATA_8BIT 0 +#define UART_DATA_9BIT 1 + +#define UART_PARITY_NONE 0 +#define UART_PARITY_ODD 1 +#define UART_PARITY_EVEN 3 +#define UART_PARITY_ONE 5 +#define UART_PARITY_ZERO 7 + +#define UART_STOP_1BIT 0 +#define UART_STOP_2BIT 1 + +#define UART_RTS_1BYTE 0 +#define UART_RTS_2BYTE 1 +#define UART_RTS_4BYTE 2 +#define UART_RTS_6BYTE 3 + +#define UART_ABR_RES_OK 1 +#define UART_ABR_RES_ERR 2 + +#define UART_ERR_FRAME 1 +#define UART_ERR_PARITY 2 +#define UART_ERR_NOISE 3 + + +/* Interrupt Type */ +#define UART_IT_RX_THR (1 << UART_CTRL_RXIE_Pos) //RX FIFO Threshold, RX FIFO中数据个数 > RXThreshold +#define UART_IT_RX_TOUT (1 << UART_CTRL_TOIE_Pos) //RX Timeout, 超过 TimeoutTime/(Baudrate/10) 秒没有在RX线上接收到数据 +#define UART_IT_TX_THR (1 << UART_CTRL_TXIE_Pos) //TX FIFO Threshold, TX FIFO中数据个数 <= TXThreshold +#define UART_IT_TX_DONE (1 << UART_CTRL_TXDOIE_Pos) //TX Done, 发送FIFO空且发送发送移位寄存器已将最后一位发送出去 + + + +void UART_Init(UART_TypeDef * UARTx, UART_InitStructure * initStruct); //UART串口初始化 +void UART_Open(UART_TypeDef * UARTx); +void UART_Close(UART_TypeDef * UARTx); + +void UART_WriteByte(UART_TypeDef * UARTx, uint8_t data); //发送一个字节数据 +uint32_t UART_ReadByte(UART_TypeDef * UARTx, uint32_t * data); //读取一个字节数据,并指出数据是否Valid + +uint32_t UART_IsTXBusy(UART_TypeDef * UARTx); +uint32_t UART_IsRXFIFOEmpty(UART_TypeDef * UARTx); //接收FIFO是否空,如果不空则可以继续UART_ReadByte() +uint32_t UART_IsTXFIFOFull(UART_TypeDef * UARTx); //发送FIFO是否满,如果不满则可以继续UART_WriteByte() + + +void UART_SetBaudrate(UART_TypeDef * UARTx, uint32_t baudrate); //设置波特率 +uint32_t UART_GetBaudrate(UART_TypeDef * UARTx); //获取当前使用的波特率 + +void UART_CTSConfig(UART_TypeDef * UARTx, uint32_t enable, uint32_t polarity); +uint32_t UART_CTSLineState(UART_TypeDef * UARTx); + +void UART_RTSConfig(UART_TypeDef * UARTx, uint32_t enable, uint32_t polarity, uint32_t threshold); +uint32_t UART_RTSLineState(UART_TypeDef * UARTx); + +void UART_LINConfig(UART_TypeDef * UARTx, uint32_t detectedLen, uint32_t detectedIEn, uint32_t generatedLen, uint32_t generatedIEn); +void UART_LINGenerate(UART_TypeDef * UARTx); +uint32_t UART_LINIsDetected(UART_TypeDef * UARTx); +uint32_t UART_LINIsGenerated(UART_TypeDef * UARTx); + +void UART_ABRStart(UART_TypeDef * UARTx, uint32_t detectChar); +uint32_t UART_ABRIsDone(UART_TypeDef * UARTx); + +void UART_INTEn(UART_TypeDef * UARTx, uint32_t it); +void UART_INTDis(UART_TypeDef * UARTx, uint32_t it); +void UART_INTClr(UART_TypeDef * UARTx, uint32_t it); +uint32_t UART_INTStat(UART_TypeDef * UARTx, uint32_t it); + + +#endif //__SWM341_UART_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usb.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usb.h new file mode 100644 index 0000000000..eef8780bba --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usb.h @@ -0,0 +1,218 @@ +#ifndef __SWM341_USB_H__ +#define __SWM341_USB_H__ + +#include <stdint.h> + + +typedef struct { + uint8_t bRequestType; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} USB_Setup_Packet_t; + + +/* bRequestType D7 Data Phase Transfer Direction */ +#define USB_REQ_DIR_MASK 0x80 +#define USB_REQ_H2D 0x00 +#define USB_REQ_D2H 0x80 + +/* bRequestType D6..5 Type */ +#define USB_REQ_STANDARD 0x00 +#define USB_REQ_CLASS 0x20 +#define USB_REQ_VENDOR 0x40 + +/* bRequestType D4..0 Recipient */ +#define USB_REQ_TO_DEVICE 0x00 +#define USB_REQ_TO_INTERFACE 0x01 +#define USB_REQ_TO_ENDPOINT 0x02 + +/* USB Standard Request */ +#define USB_GET_STATUS 0x00 +#define USB_CLEAR_FEATURE 0x01 +#define USB_SET_FEATURE 0x03 +#define USB_SET_ADDRESS 0x05 +#define USB_GET_DESCRIPTOR 0x06 +#define USB_SET_DESCRIPTOR 0x07 +#define USB_GET_CONFIGURATION 0x08 +#define USB_SET_CONFIGURATION 0x09 +#define USB_GET_INTERFACE 0x0A +#define USB_SET_INTERFACE 0x0B +#define USB_SYNC_FRAME 0x0C + +/* USB Descriptor Type */ +#define USB_DESC_DEVICE 0x01 +#define USB_DESC_CONFIG 0x02 +#define USB_DESC_STRING 0x03 +#define USB_DESC_INTERFACE 0x04 +#define USB_DESC_ENDPOINT 0x05 +#define USB_DESC_QUALIFIER 0x06 +#define USB_DESC_OTHERSPEED 0x07 +#define USB_DESC_IFPOWER 0x08 +#define USB_DESC_OTG 0x09 +#define USB_DESC_BOS 0x0F +#define USB_DESC_CAPABILITY 0x10 +#define USB_DESC_CS_INTERFACE 0x24 // Class Specific Interface + +/* USB HID Descriptor Type */ +#define USB_DESC_HID 0x21 +#define USB_DESC_HID_RPT 0x22 + +/* USB Endpoint Type */ +#define USB_EP_CTRL 0x00 +#define USB_EP_ISO 0x01 +#define USB_EP_BULK 0x02 +#define USB_EP_INT 0x03 + +#define USB_EP_IN 0x80 +#define USB_EP_OUT 0x00 + +/* USB Feature Selector */ +#define USB_FEATURE_REMOTE_WAKEUP 0x01 +#define USB_FEATURE_ENDPOINT_HALT 0x00 + +/* USB HID Class Report Type */ +#define HID_RPT_TYPE_INPUT 0x01 +#define HID_RPT_TYPE_OUTPUT 0x02 +#define HID_RPT_TYPE_FEATURE 0x03 + +/* Define HID Class Specific Request */ +#define USB_HID_GET_REPORT 0x01 +#define USB_HID_GET_IDLE 0x02 +#define USB_HID_GET_PROTOCOL 0x03 +#define USB_HID_SET_REPORT 0x09 +#define USB_HID_SET_IDLE 0x0A +#define USB_HID_SET_PROTOCOL 0x0B + + +/* Class */ +#define USB_CDC_CLASS 0x02 // for Device +#define USB_CDC_CTRL_CLASS 0x02 // for Interface +#define USB_CDC_DATA_CLASS 0x0A // for Interface +#define USB_HID_CLASS 0x03 // for Interface +#define USB_MTP_CLASS 0x06 // for Interface +#define USB_MSC_CLASS 0x08 // for Interface +#define USB_UVC_CLASS 0x0E // for Interface + + +/* SubClass */ +#define USB_CDC_ACM 0x02 // Abstract Control Model +#define USB_HID_BOOT 0x01 +#define USB_UVC_VIDEOCONTROL 0x01 +#define USB_UVC_VIDEOSTREAMING 0x02 +#define USB_UVC_VIDEO_INTERFACE_COLLECTION 0x03 + +/* Protocol */ +#define USB_CDC_ATCMD 0x01 // AT Commands defined by ITU-T V.250 +#define USB_HID_NONE 0x00 +#define USB_HID_KEYBD 0x01 +#define USB_HID_MOUSE 0x02 +#define USB_MSC_BOT 0x50 // Bulk-Only Transport + + +typedef struct { + uint8_t bLength; + uint8_t bDescriptorType; +} USB_DescHeader_t; + +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdUSB; // USB Specification Number which device complies to + uint8_t bDeviceClass; // 0x00: each interface specifies its own class code + uint8_t bDeviceSubClass; + uint8_t bDeviceProtocol; + uint8_t bMaxPacketSize; + uint16_t idVendor; // Vendor ID (Assigned by USB Org) + uint16_t idProduct; // Product ID (Assigned by Manufacturer) + uint16_t bcdDevice; // Device Release Number + uint8_t iManufacturer; // Index of Manufacturer String Descriptor + uint8_t iProduct; // Index of Product String Descriptor + uint8_t iSerialNumber; // Index of Serial Number String Descriptor + uint8_t bNumConfigurations; // Number of Possible Configurations +} USB_DevDesc_t; + +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t wTotalLength; // Total Length + uint8_t bNumInterfaces; // Number of Interfaces + uint8_t bConfigurationValue; // Value to use as an argument to select this configuration + uint8_t iConfiguration; // Index of String Descriptor Describing this configuration + uint8_t bmAttributes; // D7 Bus Powered , D6 Self Powered, D5 Remote Wakeup , D4..0 Reserved (0) + uint8_t bMaxPower; // Maximum Power Consumption +} USB_CfgDesc_t; + +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bInterfaceNumber; + uint8_t bAlternateSetting; // Value used to select alternative setting + uint8_t bNumEndpoints; // Number of Endpoints used for this interface + uint8_t bInterfaceClass; + uint8_t bInterfaceSubClass; + uint8_t bInterfaceProtocol; + uint8_t iInterface; // Index of String Descriptor Describing this interface +} USB_IntfDesc_t; + +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; + uint8_t bEndpointAddress; // indicates what endpoint this descriptor is describing + uint8_t bmAttributes; // specifies the transfer type. + uint16_t wMaxPacketSize; // Maximum Packet Size this endpoint is capable of sending or receiving + uint8_t bInterval; // is used to specify the polling interval of certain transfers. +} USB_EpDesc_t; + +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; + uint16_t bcdHID; // indicates what endpoint this descriptor is describing + uint8_t bCountryCode; + uint8_t bNumDescriptors; + uint8_t bReportDescriptorType; + uint16_t wItemLength; +} USB_HIDDesc_t; + + +/* Header Functional Descriptor, which marks the beginning of the + concatenated set of functional descriptors for the interface. */ +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; // CS_INTERFACE (0x24) + uint8_t bDescriptorSubType; // 0x00 + uint16_t bcdCDC; +} USB_CDC_HeaderFuncDesc_t; + + +/* Call Management Functional Descriptor */ +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; // CS_INTERFACE (0x24) + uint8_t bDescriptorSubType; // 0x01 + uint8_t bmCapabilities; + uint8_t bDataInterface; +} USB_CDC_CallMgmtFuncDesc_t; + + +/* Abstract Control Management Functional Descriptor */ +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; // CS_INTERFACE (0x24) + uint8_t bDescriptorSubType; // 0x02 + uint8_t bmCapabilities; +} USB_CDC_AbstCntrlMgmtFuncDesc_t; + + +/* Union Functional Descriptor */ +typedef struct __attribute__((packed)) { + uint8_t bLength; + uint8_t bDescriptorType; // CS_INTERFACE (0x24) + uint8_t bDescriptorSubType; // 0x06 + uint8_t bMasterInterface; // Interface number of the Communication or Data Class interface + uint8_t bSlaveInterface0; // Interface number of first slave +} USB_CDC_UnionFuncDesc_t; + + +#endif //__SWM341_USB_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbd.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbd.c new file mode 100644 index 0000000000..dada440e85 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbd.c @@ -0,0 +1,514 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_usbd.c +* 功能说明: SWM341单片机的USB设备功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <string.h> +#include "SWM341.h" +#include "SWM341_usbd.h" + + +USBD_Info_t USBD_Info; + + +static uint8_t *CtrlIn_Ptr = 0; +static uint8_t *CtrlOut_Ptr = 0; +static volatile uint32_t CtrlIn_Size = 0; +static volatile uint32_t CtrlOut_Size = 0; +static volatile uint32_t CtrlOut_Limit = 0; + + +/****************************************************************************************************************************************** +* 函数名称: USBD_Init() +* 功能说明: USB Device 初始化 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_Init(void) +{ + uint8_t ep_reg = 0, ep_nbr, ep_dir, ep_type, cfg, intf, alt; + uint16_t ep_pksz; + uint8_t *pCfg = USBD_Info.DescConfig; + uint32_t total_len = pCfg[2] + (pCfg[3] << 8); + uint32_t epie = 0x00010001; + + SYS->USBCR = 0; + for(int i = 0; i < CyclesPerUs; i++) __NOP(); + SYS->USBCR |= (1 << SYS_USBCR_RST48M_Pos); __DSB(); + SYS->USBCR |= (1 << SYS_USBCR_RST12M_Pos); __DSB(); + SYS->USBCR |= (1 << SYS_USBCR_RSTPLL_Pos); __DSB(); + + SYS->USBCR &= ~SYS_USBCR_ROLE_Msk; + SYS->USBCR |= (USBD_Info.Mode << SYS_USBCR_ROLE_Pos); + + SYS->USBCR |= (1 << SYS_USBCR_VBUS_Pos); + + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_USB_Pos); + + USBD_EPConfig(ep_reg++, 0, USB_EP_IN, USB_EP_CTRL, USBD_Info.CtrlPkSiz, 0, 0, 0); // Control In + USBD_EPConfig(ep_reg++, 0, USB_EP_OUT, USB_EP_CTRL, USBD_Info.CtrlPkSiz, 0, 0, 0); // Control Out + + while(pCfg < (USBD_Info.DescConfig + total_len)) + { + switch(pCfg[1]) + { + case USB_DESC_CONFIG: + cfg = pCfg[5]; + break; + + case USB_DESC_INTERFACE: + intf = pCfg[2]; + alt = pCfg[3]; + break; + + case USB_DESC_ENDPOINT: + ep_nbr = pCfg[2] & 0x0F; + ep_dir = pCfg[2] & USB_EP_IN; + ep_type = pCfg[3] & 0x03; + ep_pksz = pCfg[4] + (pCfg[5] << 8); + + USBD_EPConfig(ep_reg++, ep_nbr, ep_dir, ep_type, ep_pksz, cfg, intf, alt); + + epie |= (1 << ep_nbr) << (ep_dir ? 0 : 16); + break; + } + + pCfg += pCfg[0]; + } + + USBD->FFTHR = (0xFFF << 16) | (0x000 << 0); // 无用 + + USBD->DEVCR = (USBD_Info.Speed << USBD_DEVCR_SPEED_Pos) | + (1 << USBD_DEVCR_DEVICE_Pos) | + (1 << USBD_DEVCR_CSRDONE_Pos); + + USBD->DEVIE = (1 << USBD_DEVIE_RST_Pos) | + (1 << USBD_DEVIE_SETUP_Pos) | + (1 << USBD_DEVIE_SETCFG_Pos); + + USBD->EPIE = epie; + + SYS->USBPHYCR &= ~SYS_USBPHYCR_OPMODE_Msk; + SYS->USBPHYCR |= (0 << SYS_USBPHYCR_OPMODE_Pos); //Normal Operation +} + + +/****************************************************************************************************************************************** +* 函数名称: USBD_EPConfig() +* 功能说明: USB Device Endpoint Configure +* 输 入: uint8_t ep_reg Endpoint Register +* uint8_t ep_nbr Endpoint Number used by host +* uint8_t ep_dir Endpoint Direction, 0 Out 1 In +* uint8_t ep_type Endpoint Type, 0 Control 1 Isochronous 2 Bulk 3 Interrupt +* uint16_t ep_pksz Maximum packet size in byte +* uint8_t cfg Configuration number to which this endpoint belongs +* uint8_t intf Interface number to which this endpoint belongs +* uint8_t alt Alternate setting to which this endpoint belongs +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_EPConfig(uint8_t ep_reg, uint8_t ep_nbr, uint8_t ep_dir, uint8_t ep_type, uint16_t ep_pksz, uint8_t cfg, uint8_t intf, uint8_t alt) +{ + ep_dir = ep_dir ? 1 : 0; // for USB_EP_IN、USB_EP_OUT + + USBD->EPCFG[ep_reg] = (ep_nbr << USBD_EPCFG_EPNR_Pos) | + (ep_dir << USBD_EPCFG_DIR_Pos) | + (ep_type << USBD_EPCFG_TYPE_Pos) | + (cfg << USBD_EPCFG_CFG_Pos) | + (intf << USBD_EPCFG_INTF_Pos) | + (alt << USBD_EPCFG_ALT_Pos) | + (ep_pksz << USBD_EPCFG_PKSZ_Pos); + + if(ep_dir == USB_EP_OUT) + { + USBD->OUTEP[ep_nbr].RXCR = 0; + USBD->OUTEP[ep_nbr].RXCR = USBD_RXCR_FLUSHFF_Msk; + } + else + { + USBD->INEP[ep_nbr].TXCR = 0; + USBD->INEP[ep_nbr].TXCR = USBD_TXCR_FLUSHFF_Msk; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: USBD_Open() +* 功能说明: USB Device 打开 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_Open(void) +{ + NVIC_EnableIRQ(USB_IRQn); +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_Close() +* 功能说明: USB Device 关闭 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_Close(void) +{ + NVIC_DisableIRQ(USB_IRQn); +} + + +void USBD_StandardRequest(USB_Setup_Packet_t * pSetup); +void USBD_GetDescriptor(USB_Setup_Packet_t * pSetup); + +static USB_Setup_Packet_t Setup_Packet; +USB_Setup_Packet_t * pUSB_Setup = &Setup_Packet; +/****************************************************************************************************************************************** +* 函数名称: USBD_ProcessSetupPacket() +* 功能说明: 处理Setup包 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_ProcessSetupPacket(void) +{ + ((volatile uint32_t *)pUSB_Setup)[0] = USBD->SETUPD1; + ((volatile uint32_t *)pUSB_Setup)[1] = USBD->SETUPD2; + + switch(pUSB_Setup->bRequestType & 0x60) + { + case USB_REQ_STANDARD: + USBD_StandardRequest(pUSB_Setup); + break; + + case USB_REQ_CLASS: + if(USBD_Info.pClassRequest_Callback != NULL) + { + USBD_Info.pClassRequest_Callback(pUSB_Setup); + } + break; + + case USB_REQ_VENDOR: + if(USBD_Info.pVendorRequest_Callback != NULL) + { + USBD_Info.pVendorRequest_Callback(pUSB_Setup); + } + break; + + default: + /* Setup error, stall the device */ + USBD_Stall0(); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_StandardRequest() +* 功能说明: 处理标准请求 +* 输 入: 无 +* 输 出: 无 +* 注意事项: GetDescriptor、SetDescriptor、SyncFrame之外的标准命令USB模块自动处理,无需用户代码参与 +******************************************************************************************************************************************/ +void USBD_StandardRequest(USB_Setup_Packet_t * pSetup) +{ + if(pSetup->bRequestType & 0x80) // Device to host + { + switch(pSetup->bRequest) + { + case USB_GET_DESCRIPTOR: + USBD_GetDescriptor(pSetup); + + /* Status stage */ + USBD_RxReady(0); + break; + + default: + /* Setup error, stall the device */ + USBD_Stall0(); + break; + } + } + else // Host to device + { + switch(pSetup->bRequest) + { + default: + /* Setup error, stall the device */ + USBD_Stall0(); + break; + } + } +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_GetDescriptor() +* 功能说明: 处理标准请求GetDescriptor +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_GetDescriptor(USB_Setup_Packet_t * pSetup) +{ +#define min(a, b) ((a)<(b) ? (a) : (b)) + + switch(pSetup->wValue >> 8) + { + case USB_DESC_DEVICE: + USBD_PrepareCtrlIn(USBD_Info.DescDevice, min(pSetup->wLength, USBD_Info.DescDevice[0])); + break; + + case USB_DESC_CONFIG: + { + uint16_t total_len = USBD_Info.DescConfig[2] + (USBD_Info.DescConfig[3] << 8); + USBD_PrepareCtrlIn(USBD_Info.DescConfig, min(pSetup->wLength, total_len)); + break; + } + + case USB_DESC_STRING: + { + uint8_t index = pSetup->wValue & 0xFF; + if(index < 6) + { + USBD_PrepareCtrlIn(USBD_Info.DescString[index], min(pSetup->wLength, USBD_Info.DescString[index][0])); + } + else if((index == 0xEE) && USBD_Info.DescOSString) + { + USBD_PrepareCtrlIn(USBD_Info.DescOSString, min(pSetup->wLength, USBD_Info.DescOSString[0])); + } + else + { + /* Not support. Reply STALL. */ + USBD_Stall0(); + } + break; + } + + case USB_DESC_BOS: + { + uint16_t total_len = USBD_Info.DescBOS[2] + (USBD_Info.DescBOS[3] << 8); + USBD_PrepareCtrlIn(USBD_Info.DescBOS, min(pSetup->wLength, total_len)); + break; + } + + case USB_DESC_HID: + { + uint8_t index = pSetup->wIndex & 0xFF; + uint16_t offset = USBD_Info.DescHIDOffset[index]; + uint8_t *descHID = &USBD_Info.DescConfig[offset]; + USBD_PrepareCtrlIn(descHID, min(pSetup->wLength, descHID[0])); + break; + } + + case USB_DESC_HID_RPT: + { + uint8_t index = pSetup->wIndex & 0xFF; + uint16_t offset = USBD_Info.DescHIDOffset[index]; + uint8_t *descHID = &USBD_Info.DescConfig[offset]; + uint16_t report_len = descHID[7] + (descHID[8] << 8); + USBD_PrepareCtrlIn(USBD_Info.DescHIDReport[index], min(pSetup->wLength, report_len)); + break; + } + + default: + /* Not support. Reply STALL.*/ + USBD_Stall0(); + break; + } +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_PrepareCtrlIn() +* 功能说明: Prepare the first Control IN pipe +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_PrepareCtrlIn(uint8_t buf[], uint32_t size) +{ + CtrlIn_Ptr = buf; + CtrlIn_Size = size; + + USBD_CtrlIn(); +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_CtrlIn() +* 功能说明: Repeat Control IN pipe. This function processes the remained data of Control IN transfer +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_CtrlIn(void) +{ + static uint8_t ZeroLenPk = 0; + + if(CtrlIn_Size) + { + /* Process remained data */ + if(CtrlIn_Size > USBD_Info.CtrlPkSiz) + { + USBD_TxWrite(0, CtrlIn_Ptr, USBD_Info.CtrlPkSiz); + + CtrlIn_Ptr += USBD_Info.CtrlPkSiz; + CtrlIn_Size -= USBD_Info.CtrlPkSiz; + } + else + { + USBD_TxWrite(0, CtrlIn_Ptr, CtrlIn_Size); + + if(CtrlIn_Size == USBD_Info.CtrlPkSiz) + { + ZeroLenPk = 1; + } + + CtrlIn_Ptr = 0; + CtrlIn_Size = 0; + } + } + else + { + /* For the case of data size is integral times maximum packet size */ + if(ZeroLenPk) + { + ZeroLenPk = 0; + USBD_TxWrite(0, 0, 0); + } + } +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_PrepareCtrlOut() +* 功能说明: Prepare the first Control OUT pipe +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_PrepareCtrlOut(uint8_t *buf, uint32_t size) +{ + CtrlOut_Ptr = buf; + CtrlOut_Size = 0u; + CtrlOut_Limit = size; + + USBD_RxReady(0); +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_CtrlOut() +* 功能说明: Repeat Control OUT pipe. This function processes the successive Control OUT transfer +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_CtrlOut(void) +{ + if(CtrlOut_Size < CtrlOut_Limit) + { + uint16_t size = USBD_RxRead(CtrlOut_Ptr, CtrlOut_Limit - CtrlOut_Size); + + CtrlOut_Ptr += size; + CtrlOut_Size += size; + + if(CtrlOut_Size < CtrlOut_Limit) + { + USBD_RxReady(0); + } + } +} + + +/****************************************************************************************************************************************** +* 函数名称: USBD_TxWrite() +* 功能说明: 将要发送到主机的数据写入端点的FIFO +* 输 入: uint8_t epnr endpoint number +* uint8_t *data 要写入FIFO的数据 +* uint16_t size 要写入数据的个数 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBD_TxWrite(uint8_t epnr, uint8_t *data, uint16_t size) +{ + __disable_irq(); + + USBD->INEP[epnr].TXCR = (1 << USBD_TXCR_FLUSHFF_Pos); + + USBD->INEP[epnr].TXTRSZ = size; + if(size) USBD_memcpy((uint8_t *)USBD->TXBUF[epnr], data, size); + USBD->INEP[epnr].TXCR = (1 << USBD_TXCR_FFRDY_Pos); + + __enable_irq(); +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_RxRead() +* 功能说明: 读取接收到的数据 +* 输 入: uint8_t *buff 读取到的数据存入buff +* uint16_t size buff大小 +* 输 出: uint16_t 实际读取到数据的个数 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint16_t USBD_RxRead(uint8_t *buff, uint16_t size) +{ + __disable_irq(); + + uint16_t real_size = (USBD->RXSR & USBD_RXSR_TRSZ_Msk) >> USBD_RXSR_TRSZ_Pos; + + if(size > real_size) + size = real_size; + + USBD_memcpy(buff, (uint8_t *)USBD->RXBUF, size); + + __enable_irq(); + + return size; +} + +/****************************************************************************************************************************************** +* 函数名称: USBD_memcpy() +* 功能说明: 访问 USB Buffer 的 memcpy +* 输 入: void *destin 目的地址 +* void *source 源地址 +* uint32_t nByte 拷贝字节数 +* 输 出: 无 +* 注意事项: 访问 USB Buffer 必须使用 USBD_memcpy,不能使用库函数 memcpy +******************************************************************************************************************************************/ +void USBD_memcpy(uint8_t *destin, uint8_t *source, uint32_t nByte) +{ + while(nByte > 3) + { + *((uint32_t *)destin) = *((uint32_t *)source); + destin += 4; + source += 4; + nByte -= 4; + } + + while(nByte > 1) + { + *((uint16_t *)destin) = *((uint16_t *)source); + destin += 2; + source += 2; + nByte -= 2; + } + + while(nByte > 0) + { + *destin = *source; + destin += 1; + source += 1; + nByte -= 1; + } +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbd.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbd.h new file mode 100644 index 0000000000..6cdb6a16e4 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbd.h @@ -0,0 +1,127 @@ +#ifndef __SWM341_USBD_H__ +#define __SWM341_USBD_H__ + +#include <stdint.h> +#include <stdbool.h> + +typedef void (*USBD_ClassRequest_Callback)(USB_Setup_Packet_t * pSetup); +typedef void (*USBD_VendorRequest_Callback)(USB_Setup_Packet_t * pSetup); + +typedef struct { + uint8_t Mode; // USBD_MODE_DEV、USBD_MODE_OTG + uint8_t Speed; // USBD_SPEED_LS、USBD_SPEED_FS + uint8_t CtrlPkSiz; // Control Endpoint Packet Size + + uint8_t *DescDevice; + uint8_t *DescConfig; + uint8_t **DescString; + + USBD_ClassRequest_Callback pClassRequest_Callback; + USBD_VendorRequest_Callback pVendorRequest_Callback; + + uint8_t *DescBOS; // BOS descriptor + + /* HID */ + uint16_t *DescHIDOffset; // HID描述符在DescConfig中的偏移 + uint8_t **DescHIDReport; // HID报告描述符 + + /* WINUSB */ + uint8_t *DescOSString; // Microsoft OS String Descriptor +} USBD_Info_t; + +extern USBD_Info_t USBD_Info; + + +#define USBD_MODE_DEV 3 // Device only +#define USBD_MODE_OTG 0 // OTG, 主机模式还是从机模式由USB ID线决定 + +#define USBD_SPEED_LS 2 +#define USBD_SPEED_FS 3 + + +extern USB_Setup_Packet_t * pUSB_Setup; + + +static __INLINE void USBD_RxReady(uint8_t epnr) +{ + USBD->OUTEP[epnr].RXCR = USBD_RXCR_FLUSHFF_Msk; + USBD->OUTEP[epnr].RXCR = USBD_RXCR_FFRDY_Msk; +} + +static __INLINE void USBD_TxStall(uint8_t epnr) +{ + USBD->INEP[epnr &= 0x0F].TXCR |= (1 << USBD_TXCR_SNDSTALL_Pos); +} + +static __INLINE void USBD_RxStall(uint8_t epnr) +{ + USBD->OUTEP[epnr &= 0x0F].RXCR |= (1 << USBD_RXCR_SNDSTALL_Pos); +} + +static __INLINE void USBD_Stall0(void) +{ + USBD_TxStall(0); + USBD_RxStall(0); +} + +/* 注意:因为要读 TXSR.DATSNT 位,因此必须在 USBD_TxIntClr() 之前调用 */ +static __INLINE bool USBD_TxSuccess(uint8_t epnr) +{ + uint32_t sr = USBD->INEP[epnr].TXSR; + + return (sr & USBD_TXSR_DATSNT_Msk) && (sr & USBD_TXSR_SUCC_Msk); +} + +static __INLINE bool USBD_TxNAKSent(uint8_t epnr) +{ + return (USBD->INEP[epnr].TXSR & USBD_TXSR_NAKSNT_Msk); +} + +static __INLINE void USBD_TxIntClr(uint8_t epnr) +{ + USBD->INEP[epnr].TXSR = USBD_TXSR_NAKSNT_Msk | + USBD_TXSR_DATSNT_Msk; +} + +static __INLINE bool USBD_RxSuccess(void) +{ + return (USBD->RXSR & USBD_RXSR_SUCC_Msk); +} + +static __INLINE void USBD_RxIntClr(void) +{ + USBD->RXSR = USBD_RXSR_DONE_Msk; +} + + +static __INLINE void USBD_PullUp_Enable(void) +{ + SYS->USBPHYCR &= ~SYS_USBPHYCR_OPMODE_Msk; + SYS->USBPHYCR |= (0 << SYS_USBPHYCR_OPMODE_Pos); //Normal Operation +} + +static __INLINE void USBD_PullUp_Disable(void) +{ + SYS->USBPHYCR &= ~SYS_USBPHYCR_OPMODE_Msk; + SYS->USBPHYCR |= (1 << SYS_USBPHYCR_OPMODE_Pos); //Non-Driving, DP Pull-Up disable +} + + + +void USBD_Init(void); +void USBD_Open(void); +void USBD_Close(void); +void USBD_ProcessSetupPacket(void); +void USBD_PrepareCtrlIn(uint8_t buf[], uint32_t size); +void USBD_CtrlIn(void); +void USBD_PrepareCtrlOut(uint8_t *buf, uint32_t size); +void USBD_CtrlOut(void); + +void USBD_EPConfig(uint8_t ep_reg, uint8_t ep_nbr, uint8_t ep_dir, uint8_t ep_type, uint16_t ep_pksz, uint8_t cfg, uint8_t intf, uint8_t alt); + +void USBD_TxWrite(uint8_t epnr, uint8_t *data, uint16_t size); +uint16_t USBD_RxRead(uint8_t *buff, uint16_t size); + +void USBD_memcpy(uint8_t *destin, uint8_t *source, uint32_t nByte); + +#endif //__SWM341_USBD_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbh.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbh.c new file mode 100644 index 0000000000..b77854d133 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbh.c @@ -0,0 +1,287 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_usbh.c +* 功能说明: SWM341单片机的USB主机功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <string.h> +#include "SWM341.h" +#include "SWM341_usbh.h" + + +static uint32_t Speed; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_HW_Init() +* 功能说明: USB Host Hardware 初始化 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_HW_Init(void) +{ + SYS->USBCR = 0; + for(int i = 0; i < CyclesPerUs; i++) __NOP(); + SYS->USBCR |= (1 << SYS_USBCR_RST48M_Pos); __DSB(); + SYS->USBCR |= (1 << SYS_USBCR_RST12M_Pos); __DSB(); + SYS->USBCR |= (1 << SYS_USBCR_RSTPLL_Pos); __DSB(); + for(int i = 0; i < CyclesPerUs; i++) __NOP(); + + SYS->USBCR &= ~SYS_USBCR_ROLE_Msk; + SYS->USBCR |= (2 << SYS_USBCR_ROLE_Pos); + + SYS->USBCR |= (1 << SYS_USBCR_VBUS_Pos); + + SYS->CLKEN0 |= (0x01 << SYS_CLKEN0_USB_Pos); + + USBH->CR = USBH_CR_FLUSHFF_Msk; + + USBD->DEVCR = (0 << USBD_DEVCR_DEVICE_Pos) | // 主机模式 + (3 << USBD_DEVCR_SPEED_Pos) | + (1 << USBD_DEVCR_CSRDONE_Pos); + + USBH->PORTSR = USBH_PORTSR_POWER_Msk; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_ResetPort() +* 功能说明: 复位端口 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_ResetPort(void) +{ + USBH->PORTSR = USBH_PORTSR_RESET_Msk; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_IsDeviceConnected() +* 功能说明: 是否有设备连接到端口 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_IsDeviceConnected(void) +{ + return (USBH->PORTSR & USBH_PORTSR_CONN_Msk) ? 1 : 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_IsPortEnabled() +* 功能说明: 端口是否使能 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_IsPortEnabled(void) +{ + return (USBH->PORTSR & USBH_PORTSR_ENA_Msk) ? 1 : 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_GetDeviceSpeed() +* 功能说明: 设备速度 +* 输 入: 无 +* 输 出: uint32_t 2 低速 3 全速 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_GetDeviceSpeed(void) +{ + Speed = (USBH->PORTSR & USBH_PORTSR_SPEED_Msk) ? 2 : 3; + + return Speed; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_State() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Resp USBH_State(void) +{ + if(USBH->IF & USBH_IF_RXSTAT_Msk) + { + USBH->IF = USBH_IF_RXSTAT_Msk; + + switch(USBH->SR & USBH_SR_RESP_Msk) + { + case USBR_ACK: + case USBR_NAK: + case USBR_STALL: + return (USBH->SR & USBH_SR_RESP_Msk); + + case USBR_ERR_PID: + case USBR_ERR_CRC: + case USBR_ERR_STUFF: + case USBR_ERR_TOGGLE: + case USBR_TIMEOUT: + case USBR_UNEXPECTED_PID: + return USBR_ERROR; + } + } + + return USBR_NO; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_SendSetupPacket() +* 功能说明: 发送 Setup 包 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_SendSetupPacket(uint8_t addr, uint8_t *data, uint16_t size) +{ + uint32_t res; + + __disable_irq(); + + if((USBH->FRAMERM < 10000) && (USBH->FRAMERM > 2000)) + { + USBH->TXTRSZ = size; + for(uint32_t i = 0; i < size; i++) + { + ((uint8_t *)USBH->TXBUF)[i] = data[i]; + } + + USBH->TOKEN = (addr << USBH_TOKEN_ADDR_Pos) | + (0 << USBH_TOKEN_EPNR_Pos) | + (13 << USBH_TOKEN_TYPE_Pos) | + (0 << USBH_TOKEN_DATAX_Pos) | + (Speed << USBH_TOKEN_SPEED_Pos) | + (size << USBH_TOKEN_TRSZ_Pos); + + res = 1; + } + else + { + res = 0; + } + + __enable_irq(); + + return res; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_SendOutPacket() +* 功能说明: 发送 Out 包 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_SendOutPacket(uint8_t addr, uint8_t endp, uint8_t DATAx, uint8_t *data, uint16_t size) +{ + uint32_t res; + + __disable_irq(); + + if((USBH->FRAMERM < 10000) && (USBH->FRAMERM > 2000)) + { + USBH->TXTRSZ = size; + for(uint32_t i = 0; i < size; i++) + { + ((uint8_t *)USBH->TXBUF)[i] = data[i]; + } + + USBH->TOKEN = (addr << USBH_TOKEN_ADDR_Pos) | + (endp << USBH_TOKEN_EPNR_Pos) | + (1 << USBH_TOKEN_TYPE_Pos) | + (DATAx << USBH_TOKEN_DATAX_Pos) | + (Speed << USBH_TOKEN_SPEED_Pos) | + (size << USBH_TOKEN_TRSZ_Pos); + + res = 1; + } + else + { + res = 0; + } + + __enable_irq(); + + return res; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_SendInPacket() +* 功能说明: 发送 In 包 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_SendInPacket(uint8_t addr, uint8_t endp, uint8_t DATAx, uint16_t size) +{ + uint32_t res; + + __disable_irq(); + + if((USBH->FRAMERM < 10000) && (USBH->FRAMERM > 2000)) + { + endp &= 0x0F; + + USBH->TOKEN = (addr << USBH_TOKEN_ADDR_Pos) | + (endp << USBH_TOKEN_EPNR_Pos) | + (9 << USBH_TOKEN_TYPE_Pos) | + (DATAx << USBH_TOKEN_DATAX_Pos) | + (Speed << USBH_TOKEN_SPEED_Pos) | + (size << USBH_TOKEN_TRSZ_Pos); + + res = 1; + } + else + { + res = 0; + } + + __enable_irq(); + + return res; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_ReadRxBuffer() +* 功能说明: 读取接收到的数据 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_ReadRxBuffer(uint8_t *buff, uint32_t size) +{ + uint32_t real_size = (USBH->SR & USBH_SR_TRSZ_Msk) >> USBH_SR_TRSZ_Pos; + + if(size > real_size) + size = real_size; + + USBD_memcpy(buff, (uint8_t *)USBH->RXBUF, size); + + return size; +} + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbh.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbh.h new file mode 100644 index 0000000000..4ec355b69c --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_usbh.h @@ -0,0 +1,42 @@ +#ifndef __SWM341_USBH_H__ +#define __SWM341_USBH_H__ + +#include <stdint.h> + + +typedef enum { + USBR_ACK = 0, + USBR_ERR_CRC, + USBR_ERR_STUFF, + USBR_ERR_TOGGLE, + USBR_STALL, + USBR_TIMEOUT, + USBR_ERR_PID, // PID CHECK FAILED + USBR_UNEXPECTED_PID, + USBR_DATA_OVERRUN, + USBR_DATA_UNDERRUN, + USBR_NAK, + USBR_FRAME_OVERRUN, + USBR_BUFFER_OVERRUN, + USBR_BUFFER_UNDERRUN, + USBR_ERROR = 0xFE, + USBR_NO = 0xFF // 还未收到设备响应 +} USBH_Resp; + + +void USBH_HW_Init(void); +void USBH_ResetPort(void); +uint32_t USBH_IsDeviceConnected(void); +uint32_t USBH_IsPortEnabled(void); +uint32_t USBH_GetDeviceSpeed(void); + +USBH_Resp USBH_State(void); + +uint32_t USBH_SendSetupPacket(uint8_t addr, uint8_t *data, uint16_t size); +uint32_t USBH_SendOutPacket(uint8_t addr, uint8_t endp, uint8_t DATAx, uint8_t *data, uint16_t size); +uint32_t USBH_SendInPacket(uint8_t addr, uint8_t endp, uint8_t DATAx, uint16_t size); + +uint32_t USBH_ReadRxBuffer(uint8_t *buff, uint32_t size); + + +#endif // __SWM341_USBH_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_wdt.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_wdt.c new file mode 100644 index 0000000000..7f583ccb25 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_wdt.c @@ -0,0 +1,153 @@ +/****************************************************************************************************************************************** +* 文件名称: SWM341_wdt.c +* 功能说明: SWM341单片机的WDT看门狗功能驱动库 +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.0.0 2016年1月30日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "SWM341_wdt.h" + + +/****************************************************************************************************************************************** +* 函数名称: WDT_Init() +* 功能说明: WDT看门狗初始化 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗,有效值包括WDT +* uint32_t int_period 中断周期,取值1--2^16,单位1/1024秒,取值0表示关闭WDT中断功能 +* uint32_t rst_period 复位周期,取值1--2^16,单位1/1024秒,取值0表示关闭WDT复位功能 +* 输 出: 无 +* 注意事项: 此函数只能在芯片上电后调用一次,若需要重新配置 WDT,请调用 WDT_ReInit() +******************************************************************************************************************************************/ +void WDT_Init(WDT_TypeDef * WDTx, uint32_t int_period, uint32_t rst_period) +{ + SYS->CLKEN0 |= (1 << SYS_CLKEN0_WDT_Pos); + + WDTx->CR &= ~WDT_CR_CKDIV_Msk; + WDTx->CR |= (4 << WDT_CR_CKDIV_Pos); // 对时钟源 32 分频 + + if(int_period == 0) + { + WDTx->CR &= ~(1 << WDT_CR_INTEN_Pos); + + NVIC_DisableIRQ(WDT_IRQn); + } + else + { + WDTx->CR |= (1 << WDT_CR_INTEN_Pos); + + WDTx->INTVAL = int_period; + + WDTx->IF = 1; + NVIC_EnableIRQ(WDT_IRQn); + } + + if(rst_period == 0) + { + WDTx->CR &= ~(1 << WDT_CR_RSTEN_Pos); + + WDTx->RSTVAL = int_period; + } + else + { + WDTx->CR |= (1 << WDT_CR_RSTEN_Pos); + + WDTx->RSTVAL = rst_period; + } +} + +/****************************************************************************************************************************************** +* 函数名称: WDT_ReInit() +* 功能说明: WDT看门狗重新初始化 +* 输 入: 同 WDT_Init() +* 输 出: 无 +* 注意事项: 执行 WDT_ReInit() 前请不要执行 WDT_Stop(),因为 WDT 停止状态下无法清零内部计数器 +******************************************************************************************************************************************/ +void WDT_ReInit(WDT_TypeDef * WDTx, uint32_t int_period, uint32_t rst_period) +{ + int i; + + /* WDT 已经在运行中,若新设置的 rst_period 比当前计数器值还小,WDT 需要计数到 2^16 溢出返回 0 才能触发中断和复位, + 这里执行一下喂狗,保证计数器从零重新计数,避免上述问题 */ + WDT_Feed(WDTx); + + /* 等待 WDT 内部完成喂狗操作,计数器清零 */ + for(i = 0; i < CyclesPerUs * 300 / 4; i++) __NOP(); + + WDT_Stop(WDTx); + + WDT_Init(WDTx, int_period, rst_period); +} + +/****************************************************************************************************************************************** +* 函数名称: WDT_Start() +* 功能说明: 启动指定WDT,开始倒计时 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗,有效值包括WDT +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void WDT_Start(WDT_TypeDef * WDTx) +{ + WDTx->CR |= (1 << WDT_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: WDT_Stop() +* 功能说明: 关闭指定WDT,停止倒计时 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗,有效值包括WDT +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void WDT_Stop(WDT_TypeDef * WDTx) +{ + WDTx->CR &= ~(1 << WDT_CR_EN_Pos); +} + +/****************************************************************************************************************************************** +* 函数名称: WDT_Feed() +* 功能说明: 喂狗,重新从装载值开始倒计时 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗,有效值包括WDT +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void WDT_Feed(WDT_TypeDef * WDTx) +{ + if(WDTx->CR & WDT_CR_EN_Msk) // WDT 停止状态下,不执行喂狗 + WDTx->FEED = 0x55; +} + +/****************************************************************************************************************************************** +* 函数名称: WDT_INTClr() +* 功能说明: 中断标志清除 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗,有效值包括WDT +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void WDT_INTClr(WDT_TypeDef * WDTx) +{ + WDTx->IF = 1; +} + +/****************************************************************************************************************************************** +* 函数名称: WDT_INTStat() +* 功能说明: 中断状态查询 +* 输 入: WDT_TypeDef * WDTx 指定要被设置的看门狗,有效值包括WDT +* 输 出: int32_t 1 发生中断溢出 0 未发生中断溢出 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t WDT_INTStat(WDT_TypeDef * WDTx) +{ + return WDTx->IF; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_wdt.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_wdt.h new file mode 100644 index 0000000000..5e65d4c25c --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_StdPeriph_Driver/SWM341_wdt.h @@ -0,0 +1,16 @@ +#ifndef __SWM341_WDT_H__ +#define __SWM341_WDT_H__ + +void WDT_Init(WDT_TypeDef * WDTx, uint32_t int_period, uint32_t rst_period); +void WDT_ReInit(WDT_TypeDef * WDTx, uint32_t int_period, uint32_t rst_period); +void WDT_Start(WDT_TypeDef * WDTx); //启动指定WDT,开始倒计时 +void WDT_Stop(WDT_TypeDef * WDTx); //关闭指定WDT,停止倒计时 + +void WDT_Feed(WDT_TypeDef * WDTx); //喂狗,重新从装载值开始倒计时 + + +void WDT_INTClr(WDT_TypeDef * WDTx); //中断标志清除 +uint32_t WDT_INTStat(WDT_TypeDef * WDTx); //中断状态查询 + + +#endif //__SWM341_WDT_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_core.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_core.c new file mode 100644 index 0000000000..fe9249111c --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_core.c @@ -0,0 +1,322 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_cdc_core.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <stdlib.h> +#include <string.h> +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_stdreq.h" +#include "usbh_cdc_core.h" +#include "usbh_cdc_funct.h" + + +USBH_Class_cb_t USBH_CDC_cb = +{ + USBH_CDC_Init, + USBH_CDC_DeInit, + USBH_CDC_Request, + USBH_CDC_Process +}; + + +volatile USBH_CDC_Info_t USBH_CDC_Info; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_Init() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CDC_Init(USBH_Info_t *phost) +{ + USB_EpDesc_t *pEpIn, *pEpOut, *pEpCtrl; + + if((phost->Device.Dev_Desc.bDeviceClass == USB_CDC_CLASS) && + (phost->Device.Intf_Desc[0].bInterfaceClass == USB_CDC_CTRL_CLASS) && + (phost->Device.Intf_Desc[1].bInterfaceClass == USB_CDC_DATA_CLASS)) + { + pEpCtrl = &phost->Device.Ep_Desc[0][0]; + + if(phost->Device.Ep_Desc[1][0].bEndpointAddress & USB_EP_IN) + { + pEpIn = &phost->Device.Ep_Desc[1][0]; + pEpOut = &phost->Device.Ep_Desc[1][1]; + } + else + { + pEpIn = &phost->Device.Ep_Desc[1][1]; + pEpOut = &phost->Device.Ep_Desc[1][0]; + } + + USBH_CDC_Info.InEp = pEpIn->bEndpointAddress; + USBH_CDC_Info.InEpSize = pEpIn->wMaxPacketSize; + USBH_CDC_Info.OutEp = pEpOut->bEndpointAddress; + USBH_CDC_Info.OutEpSize = pEpOut->wMaxPacketSize; + USBH_CDC_Info.CtrlEp = pEpCtrl->bEndpointAddress; + USBH_CDC_Info.CtrlEpSize = pEpCtrl->wMaxPacketSize; + + USBH_CDC_DeInit(phost); + } + else + { + if(phost->usr_cb->DeviceNotSupported) + phost->usr_cb->DeviceNotSupported(); + + return USBH_NOT_SUPPORTED; + } + + return USBH_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_DeInit() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_CDC_DeInit(USBH_Info_t *phost) +{ + USBH_CDC_Info.InEpDATAX = 0; + USBH_CDC_Info.OutEpDATAX = 0; + USBH_CDC_Info.CtrlEpDATAX = 0; + + USBH_CDC_Info.TxWrPtr = 0; + USBH_CDC_Info.TxRdPtr = 0; + USBH_CDC_Info.RxWrPtr = 0; + USBH_CDC_Info.RxRdPtr = 0; + + USBH_CDC_Info.state = USBH_CDC_SEND; + USBH_CDC_Info.reqState = CDC_GET_LINE_CODING; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_Request() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CDC_Request(USBH_Info_t *phost) +{ + USBH_Status status = USBH_BUSY; + USBH_Status reqStatus; + + switch(USBH_CDC_Info.reqState) + { + case CDC_SET_LINE_CODING: + reqStatus = USBH_CDC_SetLineCoding(phost); + if(reqStatus == USBH_OK) + { + USBH_CDC_Info.reqState = CDC_GET_LINE_CODING ; + } + if(reqStatus == USBH_NOT_SUPPORTED) + { + USBH_CDC_Info.reqState = CDC_CLR_STALL; + } + break; + + case CDC_GET_LINE_CODING: + reqStatus = USBH_CDC_GetLineCoding(phost); + if(reqStatus == USBH_OK) + { + USBH_CDC_Info.reqState = CDC_SET_CONTROL_LINE; + } + break; + + case CDC_SET_CONTROL_LINE: + reqStatus = USBH_CDC_SetControlLine(phost); + if(reqStatus == USBH_OK) + { + status = USBH_OK; + } + break; + + case CDC_CLR_STALL: + reqStatus = USBH_ClrFeature(phost, 0); + if(reqStatus == USBH_OK ) + { + phost->Ctrl.toggle_out = 0; + + USBH_CDC_Info.reqState = CDC_GET_LINE_CODING ; + } + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_Process() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CDC_Process(USBH_Info_t *phost) +{ + static uint32_t FrameNbr = 0; + static uint32_t size; + uint32_t available, space; + USBH_Status status = USBH_OK; + USBH_Resp resp; + + switch(USBH_CDC_Info.state) + { + case USBH_CDC_SEND: + available = USBH_CDC_Info.TxWrPtr - USBH_CDC_Info.TxRdPtr; + if((available >= USBH_CDC_Info.OutEpSize) || ((available > 0) && (abs((int)USBH->FRAMENR - (int)USBH_CDC_Info.TxFrameNbr) > 10))) + { + USBH_CDC_Info.TxFrameNbr = USBH->FRAMENR; + + size = (available > USBH_CDC_Info.OutEpSize) ? USBH_CDC_Info.OutEpSize : available; + + if(USBH_SendOutPacket(phost->Device.Address, USBH_CDC_Info.OutEp, USBH_CDC_Info.OutEpDATAX, (uint8_t *)&USBH_CDC_Info.TxBuff[USBH_CDC_Info.TxRdPtr], size)) + { + USBH_CDC_Info.state = USBH_CDC_SEND_WAIT; + } + } + else + { + USBH_CDC_Info.state = USBH_CDC_READ; + } + break; + + case USBH_CDC_SEND_WAIT: + resp = USBH_State(); + if(resp != USBR_NO) + { + if(resp == USBR_ACK) + { + USBH_CDC_Info.OutEpDATAX ^= 1; + + USBH_CDC_Info.TxRdPtr += size; + if(USBH_CDC_Info.TxRdPtr == USBH_CDC_Info.TxWrPtr) // USBH_CDC_Info.TxBuff 中数据已全部发出 + { + USBH_CDC_Info.TxRdPtr = 0; + USBH_CDC_Info.TxWrPtr = 0; + } + } + + USBH_CDC_Info.state = USBH_CDC_READ; + } + break; + + case USBH_CDC_READ: + space = USBH_CDC_BUFF_SIZE - USBH_CDC_Info.RxWrPtr; + if((space >= USBH_CDC_Info.InEpSize) && (abs((int)USBH->FRAMENR - (int)USBH_CDC_Info.TxFrameNbr) > 10)) + { + USBH_CDC_Info.RxFrameNbr = USBH->FRAMENR; + + if(USBH_SendInPacket(phost->Device.Address, USBH_CDC_Info.InEp, USBH_CDC_Info.InEpDATAX, USBH_CDC_Info.InEpSize)) + { + USBH_CDC_Info.state = USBH_CDC_READ_WAIT; + } + } + break; + + case USBH_CDC_READ_WAIT: + resp = USBH_State(); + if(resp != USBR_NO) + { + if(resp == USBR_ACK) + { + USBH_CDC_Info.InEpDATAX ^= 1; + + size = USBH_ReadRxBuffer((uint8_t *)&USBH_CDC_Info.RxBuff[USBH_CDC_Info.RxWrPtr], USBH_CDC_Info.InEpSize); + USBH_CDC_Info.RxWrPtr += size; + } + + USBH_CDC_Info.state = USBH_CDC_SEND; + } + break; + + case USBH_CDC_CTRL: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_Process() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_CDC_Send(uint8_t *data, uint16_t size) +{ + uint16_t space = USBH_CDC_BUFF_SIZE - USBH_CDC_Info.TxWrPtr; // 可写入数据个数 + + if(space >= size) + { + __disable_irq(); + + memcpy((uint8_t *)&USBH_CDC_Info.TxBuff[USBH_CDC_Info.TxWrPtr], data, size); + USBH_CDC_Info.TxWrPtr += size; + + __enable_irq(); + + return size; + } + + return 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_Process() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t USBH_CDC_Read(uint8_t *buff, uint16_t size) +{ + uint16_t available = USBH_CDC_Info.RxWrPtr - USBH_CDC_Info.RxRdPtr; + + if(size > available) + size = available; + + if(size) + { + __disable_irq(); + + memcpy(buff, (uint8_t *)&USBH_CDC_Info.RxBuff[USBH_CDC_Info.RxRdPtr], size); + + USBH_CDC_Info.RxRdPtr += size; + if(USBH_CDC_Info.RxRdPtr == USBH_CDC_Info.RxWrPtr) // USBH_CDC_Info.RxBuff 中数据已全部读出 + { + USBH_CDC_Info.RxRdPtr = 0; + USBH_CDC_Info.RxWrPtr = 0; + } + + __enable_irq(); + } + + return size; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_core.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_core.h new file mode 100644 index 0000000000..f92e30cf97 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_core.h @@ -0,0 +1,74 @@ +#ifndef __USBH_CDC_CORE_H__ +#define __USBH_CDC_CORE_H__ + +#include <stdint.h> + + +typedef enum { + USBH_CDC_SEND = 0, + USBH_CDC_SEND_WAIT, + USBH_CDC_READ, + USBH_CDC_READ_WAIT, + USBH_CDC_CTRL +} USBH_CDC_State; + + +typedef enum { + CDC_SET_LINE_CODING = 0x20, + CDC_GET_LINE_CODING, + CDC_SET_CONTROL_LINE, + CDC_CLR_STALL, +} USBH_CDC_ReqState; + + +typedef struct { + void (*Send)(uint8_t *); + void (*Receive)(uint8_t *); +} USBH_CDC_cb_t; + + +typedef struct { + uint8_t InEp; + uint8_t OutEp; + uint16_t InEpSize; + uint16_t OutEpSize; + uint8_t InEpDATAX; + uint8_t OutEpDATAX; + + uint8_t CtrlEp; + uint16_t CtrlEpSize; + uint8_t CtrlEpDATAX; + + USBH_CDC_State state; + USBH_CDC_State stateBkp; + USBH_CDC_ReqState reqState; + + uint8_t TxBuff[USBH_CDC_BUFF_SIZE]; + uint8_t RxBuff[USBH_CDC_BUFF_SIZE]; + uint16_t TxWrPtr, TxRdPtr; + uint16_t RxWrPtr, RxRdPtr; + uint16_t TxFrameNbr; // Frame Number + uint16_t RxFrameNbr; + + USBH_CDC_cb_t *cdc_cb; +} USBH_CDC_Info_t; + + +extern volatile USBH_CDC_Info_t USBH_CDC_Info; + + + +extern USBH_Class_cb_t USBH_CDC_cb; + + +USBH_Status USBH_CDC_Init(USBH_Info_t *phost); +void USBH_CDC_DeInit(USBH_Info_t *phost); +USBH_Status USBH_CDC_Request(USBH_Info_t *phost); +USBH_Status USBH_CDC_Process(USBH_Info_t *phost); + + +uint32_t USBH_CDC_Send(uint8_t *data, uint16_t size); +uint32_t USBH_CDC_Read(uint8_t *buff, uint16_t size); + + +#endif // __USBH_CDC_CORE_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_funct.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_funct.c new file mode 100644 index 0000000000..1c4903c733 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_funct.c @@ -0,0 +1,124 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_cdc_funct.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_cdc_core.h" +#include "usbh_cdc_funct.h" + + +/* wValue for SetControlLineState */ +#define CDC_RTS_ACTIVATE 0x0002 +#define CDC_RTS_DEACTIVATE 0x0000 +#define CDC_DTR_ACTIVATE 0x0001 +#define CDC_DTR_DEACTIVATE 0x0000 + + +CDC_LineCoding_t CDC_GetLineCode; +CDC_LineCoding_t CDC_SetLineCode; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_GetLineCoding() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CDC_GetLineCoding(USBH_Info_t *phost) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_D2H | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = CDC_GET_LINE_CODING; + phost->Ctrl.setup.wValue = 0; + phost->Ctrl.setup.wIndex = 0; + phost->Ctrl.setup.wLength = sizeof(CDC_LineCoding_t); + + return USBH_CtrlTransfer(phost, (uint8_t *)&CDC_GetLineCode, sizeof(CDC_LineCoding_t)); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_SetLineCoding() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CDC_SetLineCoding(USBH_Info_t *phost) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = CDC_SET_LINE_CODING; + phost->Ctrl.setup.wValue = 0; + phost->Ctrl.setup.wIndex = 0; + phost->Ctrl.setup.wLength = sizeof(CDC_LineCoding_t); + + return USBH_CtrlTransfer(phost, (uint8_t *)&CDC_SetLineCode , sizeof(CDC_LineCoding_t)); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_SetControlLine() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CDC_SetControlLine(USBH_Info_t *phost) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = CDC_SET_CONTROL_LINE; + phost->Ctrl.setup.wValue = CDC_RTS_DEACTIVATE | CDC_DTR_DEACTIVATE; + phost->Ctrl.setup.wIndex = 0; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0 , 0); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_IssueSetLineCoding() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_CDC_IssueSetLineCoding(USBH_Info_t *phost) +{ + USBH_CDC_Info.reqState = CDC_SET_LINE_CODING; + + phost->StateBkp = phost->State; + phost->State = HOST_CLASS_REQUEST; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CDC_IssueGetLineCoding() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_CDC_IssueGetLineCoding(USBH_Info_t *phost) +{ + USBH_CDC_Info.reqState = CDC_GET_LINE_CODING; + + phost->StateBkp = phost->State; + phost->State = HOST_CLASS_REQUEST; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_funct.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_funct.h new file mode 100644 index 0000000000..a7b4ed7a6c --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/CDC/usbh_cdc_funct.h @@ -0,0 +1,23 @@ +#ifndef __USBH_CDC_FUNCT_H__ +#define __USBH_CDC_FUNCT_H__ + +#include <stdint.h> + + +typedef struct __attribute__((packed)) { + uint32_t dwDTERate; // Data terminal rate, in bits per second + uint8_t bCharFormat; // Stop bits, 0 - 1 Stop bit, 1 - 1.5 Stop bits, 2 - 2 Stop bits + uint8_t bParityType; // Parity, 0 - None, 1 - Odd, 2 - Even, 3 - Mark, 4 - Space + uint8_t bDataBits; // Data bits (5, 6, 7, 8 or 16) +} CDC_LineCoding_t; + + + +USBH_Status USBH_CDC_GetLineCoding(USBH_Info_t *phost); +USBH_Status USBH_CDC_SetLineCoding(USBH_Info_t *phost); +USBH_Status USBH_CDC_SetControlLine(USBH_Info_t *phost); +void USBH_CDC_IssueSetLineCoding(USBH_Info_t *phost); +void USBH_CDC_IssueGetLineCoding(USBH_Info_t *phost); + + +#endif // __USBH_CDC_FUNCT_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_core.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_core.c new file mode 100644 index 0000000000..585aac8a99 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_core.c @@ -0,0 +1,293 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_hid_core.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "usbh_hid_core.h" +#include "usbh_hid_keybd.h" +#include "usbh_hid_mouse.h" + + +USBH_Class_cb_t USBH_HID_cb = +{ + USBH_HID_Init, + USBH_HID_DeInit, + USBH_HID_Request, + USBH_HID_Process, +}; + + +volatile USBH_HID_Info_t USBH_HID_Info; + + +static uint8_t DataInBuffer[64]; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_HID_Init() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_HID_Init(USBH_Info_t *phost) +{ + USB_EpDesc_t *pEpIn, *pEpOut; + + if(phost->Device.Intf_Desc[0].bInterfaceClass == USB_HID_CLASS) + { + if(phost->Device.Intf_Desc[0].bInterfaceProtocol == USB_HID_KEYBD) + { + USBH_HID_Info.hid_cb = &USBH_HID_KeyBD_cb; + } + else if(phost->Device.Intf_Desc[0].bInterfaceProtocol == USB_HID_MOUSE) + { + USBH_HID_Info.hid_cb = &USBH_HID_Mouse_cb; + } + + if(phost->Device.Ep_Desc[0][0].bEndpointAddress & USB_EP_IN) + { + pEpIn = &phost->Device.Ep_Desc[0][0]; + pEpOut = &phost->Device.Ep_Desc[0][1]; + } + else + { + pEpIn = &phost->Device.Ep_Desc[0][1]; + pEpOut = &phost->Device.Ep_Desc[0][0]; + } + + USBH_HID_Info.InEp = pEpIn->bEndpointAddress; + USBH_HID_Info.InEpSize = pEpIn->wMaxPacketSize; + USBH_HID_Info.InEpInterval = pEpIn->bInterval; + USBH_HID_Info.OutEp = pEpOut->bEndpointAddress; + USBH_HID_Info.OutEpSize = pEpOut->wMaxPacketSize; + USBH_HID_Info.OutEpInterval = pEpOut->bInterval; + + USBH_HID_DeInit(phost); + } + else + { + if(phost->usr_cb->DeviceNotSupported) + phost->usr_cb->DeviceNotSupported(); + } + + return USBH_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_HID_DeInit() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_HID_DeInit(USBH_Info_t *phost) +{ + USBH_HID_Info.InEpDATAX = 0; + USBH_HID_Info.InEpFrameNbr = 0; + USBH_HID_Info.OutEpDATAX = 0; + USBH_HID_Info.OutEpFrameNbr = 0; + + USBH_HID_Info.state = USBH_HID_IDLE; + USBH_HID_Info.reqState = USBH_HID_REQ_GET_REPORT_DESC; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_HID_Request() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_HID_Request(USBH_Info_t *phost) +{ + USBH_Status status = USBH_BUSY; + USBH_Status reqStatus = USBH_BUSY; + + switch(USBH_HID_Info.reqState) + { + case USBH_HID_REQ_GET_REPORT_DESC: + reqStatus = USBH_GetDescriptorEx(phost, USB_REQ_STANDARD, USB_REQ_TO_INTERFACE, USB_DESC_HID_RPT, 0, 0, phost->Device.HIDReport_Desc[0], phost->Device.HID_Desc[0].wItemLength); + if(reqStatus == USBH_OK) + { + USBH_HID_Info.reqState = USBH_HID_REQ_SET_IDLE; + } + break; + + case USBH_HID_REQ_SET_IDLE: + reqStatus = USBH_Set_Idle(phost, 0, 0, 0); + if(reqStatus == USBH_OK) + { + status = USBH_OK; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_HID_Process() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_HID_Process(USBH_Info_t *phost) +{ + USBH_Status status = USBH_OK; + USBH_Resp resp; + + switch(USBH_HID_Info.state) + { + case USBH_HID_IDLE: + USBH_HID_Info.hid_cb->Init(); + USBH_HID_Info.state = USBH_HID_SYNC; + + USBH->IF = USBH_IF_SOF_Msk; + break; + + case USBH_HID_SYNC: + if(USBH->IF & USBH_IF_SOF_Msk) + { + USBH_HID_Info.state = USBH_HID_READ; + } + break; + + case USBH_HID_READ: + if((USBH->FRAMENR + 65536 - USBH_HID_Info.InEpFrameNbr) % 65536 >= USBH_HID_Info.InEpInterval) + { + if(USBH_SendInPacket(phost->Device.Address, USBH_HID_Info.InEp, USBH_HID_Info.InEpDATAX, USBH_HID_Info.InEpSize)) + { + USBH_HID_Info.InEpFrameNbr = USBH->FRAMENR; + + USBH_HID_Info.state = USBH_HID_READ_WAIT; + } + } + break; + + case USBH_HID_READ_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + USBH_HID_Info.InEpDATAX ^= 1; + + USBH_ReadRxBuffer(DataInBuffer, USBH_HID_Info.InEpSize); + USBH_HID_Info.hid_cb->Decode(DataInBuffer); + + USBH_HID_Info.state = USBH_HID_READ; + } + else if(resp == USBR_NAK) + { + USBH_HID_Info.state = USBH_HID_READ; + } + else if(resp == USBR_STALL) + { + USBH_HID_Info.state = USBH_HID_STALL_IN; + } + else if(resp == USBR_ERROR) + { + USBH_HID_Info.state = USBH_HID_READ; + } + break; + + case USBH_HID_STALL_IN: + status = USBH_ClrFeature(phost, USBH_HID_Info.InEp); + if(status == USBH_OK) + { + USBH_HID_Info.InEpDATAX = 0; + + USBH_HID_Info.state = USBH_HID_READ; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_Set_Idle() +* 功能说明: +* 输 入: uint8_t interface +* uint8_t reportID Targeted report ID for Set Idle request +* uint8_t duration Duration for HID Idle request, 单位 4ms +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_Set_Idle(USBH_Info_t *phost, uint8_t interface, uint8_t reportId, uint8_t duration) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = USB_HID_SET_IDLE; + phost->Ctrl.setup.wValue = (duration << 8 ) | reportId; + phost->Ctrl.setup.wIndex = interface; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0, 0); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_Set_Report() +* 功能说明: +* 输 入: uint8_t interface +* uint8_t reportId Targeted report ID for Set Report request +* uint8_t reportType 1 Input,2 Output,3 Feature +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_Set_Report(USBH_Info_t *phost, uint8_t interface, uint8_t reportId, uint8_t reportType, uint8_t * reportData, uint16_t reportLen) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = USB_HID_SET_REPORT; + phost->Ctrl.setup.wValue = (reportType << 8 ) | reportId; + phost->Ctrl.setup.wIndex = interface; + phost->Ctrl.setup.wLength = reportLen; + + return USBH_CtrlTransfer(phost, reportData, reportLen); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_Set_Protocol() +* 功能说明: +* 输 入: uint8_t interface +* uint8_t protocol 0 = Boot Protocol, 1 = Report Protocol +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_Set_Protocol(USBH_Info_t *phost, uint8_t interface, uint8_t protocol) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = USB_HID_SET_PROTOCOL; + phost->Ctrl.setup.wValue = protocol; + phost->Ctrl.setup.wIndex = interface; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0, 0); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_core.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_core.h new file mode 100644 index 0000000000..9447fd7c5a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_core.h @@ -0,0 +1,72 @@ +#ifndef __USBH_HID_CORE_H__ +#define __USBH_HID_CORE_H__ + +#include "usbh_core.h" +#include "usbh_stdreq.h" + + +typedef enum { + USBH_HID_IDLE = 0, + USBH_HID_SYNC, + USBH_HID_READ, + USBH_HID_READ_WAIT, + USBH_HID_SEND, + USBH_HID_SEND_WAIT, + USBH_HID_ERROR, + USBH_HID_STALL_IN, + USBH_HID_STALL_OUT +} USBH_HID_State; + + +typedef enum { + USBH_HID_REQ_IDLE = 0, + USBH_HID_REQ_GET_REPORT_DESC, + USBH_HID_REQ_SET_IDLE, + USBH_HID_REQ_SET_PROTOCOL, + USBH_HID_REQ_SET_REPORT, +} USBH_HID_ReqState; + + +typedef struct { + void (*Init)(void); + void (*Decode)(uint8_t *data); +} USBH_HID_cb_t; + + +typedef struct { + uint8_t InEp; + uint8_t OutEp; + uint16_t InEpSize; + uint16_t OutEpSize; + uint8_t InEpDATAX; + uint8_t OutEpDATAX; + + uint8_t InEpInterval; + uint16_t InEpFrameNbr; + uint8_t OutEpInterval; + uint16_t OutEpFrameNbr; + + USBH_HID_State state; + USBH_HID_State stateBkp; + USBH_HID_ReqState reqState; + + USBH_HID_cb_t *hid_cb; +} USBH_HID_Info_t; + + +extern volatile USBH_HID_Info_t USBH_HID_Info; + +extern USBH_Class_cb_t USBH_HID_cb; + +USBH_Status USBH_HID_Init(USBH_Info_t *phost); +void USBH_HID_DeInit(USBH_Info_t *phost); +USBH_Status USBH_HID_Request(USBH_Info_t *phost); +USBH_Status USBH_HID_Process(USBH_Info_t *phost); + + +USBH_Status USBH_Set_Idle(USBH_Info_t *phost, uint8_t interface, uint8_t reportId, uint8_t duration); +USBH_Status USBH_Set_Report(USBH_Info_t *phost, uint8_t interface, uint8_t reportId, uint8_t reportType, uint8_t * reportData, uint16_t reportLen); +USBH_Status USBH_Set_Protocol(USBH_Info_t *phost, uint8_t interface, uint8_t protocol); + + +#endif // __USBH_HID_CORE_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_keybd.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_keybd.c new file mode 100644 index 0000000000..7e817b1757 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_keybd.c @@ -0,0 +1,159 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_hid_keybd.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <string.h> +#include "SWM341.h" +#include "usbh_hid_core.h" +#include "usbh_hid_keybd.h" + + +USBH_HID_cb_t USBH_HID_KeyBD_cb = +{ + USBH_HID_KeyBD_Init, + USBH_HID_KeyBD_Decode +}; + + +static const uint8_t HID_KEYBRD_Codes[] = { + 0, 0, 0, 0, 31, 50, 48, 33, 19, 34, 35, 36, 24, 37, 38, 39, + 52, 51, 25, 26, 17, 20, 32, 21, 23, 49, 18, 47, 22, 46, 2, 3, + 4, 5, 6, 7, 8, 9, 10, 11, 43, 110, 15, 16, 61, 12, 13, 27, + 28, 29, 42, 40, 41, 1, 53, 54, 55, 30, 112, 113, 114, 115, 116, 117, + 118, 119, 120, 121, 122, 123, 124, 125, 126, 75, 80, 85, 76, 81, 86, 89, + 79, 84, 83, 90, 95, 100, 105, 106, 108, 93, 98, 103, 92, 97, 102, 91, + 96, 101, 99, 104, 45, 129, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 107, 0, 56, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 58, 44, 60, 127, 64, 57, 62, 128, +}; + +static const uint8_t HID_KEYBRD_Key[] = { + '\0', '`', '1', '2', '3', '4', '5', '6', '7', '8', + '9', '0', '-', '=', '\0', '\r', '\t', 'q', 'w', 'e', + 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']', '\\', + '\0', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', + ';', '\'', '\0', '\n', '\0', '\0', 'z', 'x', 'c', 'v', + 'b', 'n', 'm', ',', '.', '/', '\0', '\0', '\0', '\0', + '\0', ' ', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\r', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '7', '4', '1', '\0', '/', '8', '5', '2', '0', + '*', '9', '6', '3', '.', '-', '+', '\0', '\n', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0' +}; + +static const uint8_t HID_KEYBRD_ShiftKey[] = { + '\0', '~', '!', '@', '#', '$', '%', '^', '&', '*', + '(', ')', '_', '+', '\0', '\0', '\0', 'Q', 'W', 'E', + 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}', '|', + '\0', 'A', 'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', + ':', '"', '\0', '\n', '\0', '\0', 'Z', 'X', 'C', 'V', + 'B', 'N', 'M', '<', '>', '?', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', + '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0', '\0' +}; + + +static uint8_t keys_last[6]; +static uint8_t nbr_keys_last; + + +void USBH_HID_KeyBD_Init(void) +{ + nbr_keys_last = 0; + memset(keys_last, 0x00, 6); +} + + +void USBH_HID_KeyBD_Decode(uint8_t *pbuf) +{ + char key; + uint8_t i, j; + uint8_t keys[6]; + uint8_t keys_new[6]; + uint8_t nbr_keys; + uint8_t nbr_keys_new; + + for(i = 2; i < 8; i++) + { + if((pbuf[i] == 0x01) || (pbuf[i] == 0x02) || (pbuf[i] == 0x03)) + return; + } + + nbr_keys = 0; + nbr_keys_new = 0; + for(i = 2; i < 8; i++) + { + if(pbuf[i] != 0x00) + { + keys[nbr_keys++] = pbuf[i]; + + for(j = 0; j < nbr_keys_last; j++) + { + if(pbuf[i] == keys_last[j]) + break; + } + + if(j == nbr_keys_last) // 遍历到了最后,说明 pbuf[i] 不在 keys_last 中,是新按下的 + keys_new[nbr_keys_new++] = pbuf[i]; + } + } + + if(nbr_keys_new == 1) + { + if((pbuf[0] & KBD_LEFT_SHIFT) || (pbuf[0] & KBD_RIGHT_SHIFT)) + { + key = HID_KEYBRD_ShiftKey[HID_KEYBRD_Codes[keys_new[0]]]; + } + else + { + key = HID_KEYBRD_Key[HID_KEYBRD_Codes[keys_new[0]]]; + } + + USBH_HID_KeyBD_Handle(pbuf[0], key); // call user process handle + } + + memcpy(keys_last, keys, 6); + nbr_keys_last = nbr_keys; +} + + +__attribute__((weak)) +void USBH_HID_KeyBD_Handle(uint8_t ctrl, char key) +{ + if((ctrl & KBD_LEFT_CTRL) | (ctrl & KBD_RIGHT_CTRL)) + printf("Ctrl-"); + + if((ctrl & KBD_LEFT_ALT) | (ctrl & KBD_RIGHT_ALT)) + printf("Alt-"); + + printf("%c\r\n", key); +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_keybd.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_keybd.h new file mode 100644 index 0000000000..df37b0de57 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_keybd.h @@ -0,0 +1,27 @@ +#ifndef __USBH_HID_KEYBD_H__ +#define __USBH_HID_KEYBD_H__ + +#include <stdint.h> + + +#define KBD_LEFT_CTRL 0x01 +#define KBD_LEFT_SHIFT 0x02 +#define KBD_LEFT_ALT 0x04 +#define KBD_LEFT_CMD 0x08 +#define KBD_RIGHT_CTRL 0x10 +#define KBD_RIGHT_SHIFT 0x20 +#define KBD_RIGHT_ALT 0x40 +#define KBD_RIGHT_CMD 0x80 + + +extern USBH_HID_cb_t USBH_HID_KeyBD_cb; + + +void USBH_HID_KeyBD_Init(void); +void USBH_HID_KeyBD_Decode(uint8_t *pbuf); + +__attribute__((weak)) +void USBH_HID_KeyBD_Handle(uint8_t ctrl, char key); + + +#endif // __USBH_HID_KEYBD_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_mouse.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_mouse.c new file mode 100644 index 0000000000..6551ad42af --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_mouse.c @@ -0,0 +1,46 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_hid_mouse.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "usbh_hid_core.h" +#include "usbh_hid_mouse.h" + + +USBH_HID_cb_t USBH_HID_Mouse_cb = +{ + USBH_HID_Mouse_Init, + USBH_HID_Mouse_Decode, +}; + + +USBH_HID_Mouse_Data_t USBH_HID_Mouse_Data; + + +void USBH_HID_Mouse_Init(void) +{ +} + + +void USBH_HID_Mouse_Decode(uint8_t *data) +{ + USBH_HID_Mouse_Data.button = data[0]; + USBH_HID_Mouse_Data.x = data[1]; + USBH_HID_Mouse_Data.y = data[2]; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_mouse.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_mouse.h new file mode 100644 index 0000000000..f2576d3eff --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/HID/usbh_hid_mouse.h @@ -0,0 +1,24 @@ +#ifndef __USBH_HID_MOUSE_H__ +#define __USBH_HID_MOUSE_H__ + +#include <stdint.h> + + +typedef struct { + uint8_t button; // bit0 左键 bit1 右键 bit2 中键 + uint8_t x; + uint8_t y; + uint8_t z; // Not Supported +} USBH_HID_Mouse_Data_t; + +extern USBH_HID_Mouse_Data_t USBH_HID_Mouse_Data; + + +extern USBH_HID_cb_t USBH_HID_Mouse_cb; + + +void USBH_HID_Mouse_Init(void); +void USBH_HID_Mouse_Decode(uint8_t *data); + + +#endif // __USBH_HID_MOUSE_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_bot.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_bot.c new file mode 100644 index 0000000000..f68db994a6 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_bot.c @@ -0,0 +1,323 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_msc_bot.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_stdreq.h" +#include "usbh_msc_bot.h" +#include "usbh_msc_core.h" +#include "usbh_msc_scsi.h" + + +#define MSC_CBW_SIGNATURE 0x43425355 +#define MSC_CBW_TAG 0x20304050 +#define MSC_CSW_SIGNATURE 0x53425355 +#define MSC_CBW_LENGTH 31 +#define MSC_CSW_LENGTH 13 + + +USBH_CBWPkt_t USBH_CBWData; +USBH_CSWPkt_t USBH_CSWData; + + +static uint32_t BOT_StallCount; +static uint32_t BOT_ErrorCount; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_BOT_Init() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_MSC_BOT_Init(void) +{ + USBH_CBWData.CBWSignature = MSC_CBW_SIGNATURE; + USBH_CBWData.CBWTag = MSC_CBW_TAG; + USBH_CBWData.CBWLUN = 0; + + BOT_StallCount = 0; + BOT_ErrorCount = 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_BOT_Process() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_MSC_BOT_Process(USBH_Info_t *phost) +{ + static uint32_t remLen; // remaining length + static uint8_t *pdBuff; + USBH_Status stat; + USBH_Resp resp; + uint32_t size; + + switch(USBH_BOTXfer.BOTState) + { + case USBH_MSC_BOT_CBW: + if(USBH_SendOutPacket(phost->Device.Address, USBH_MSC_Info.OutEp, USBH_MSC_Info.OutEpDATAX, (uint8_t *)&USBH_CBWData, MSC_CBW_LENGTH)) + { + USBH_BOTXfer.BOTStateBkp = USBH_BOTXfer.BOTState; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW_WAIT; + BOT_ErrorCount = 0; + } + break; + + case USBH_MSC_BOT_CBW_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + BOT_StallCount = 0; + + USBH_MSC_Info.OutEpDATAX ^= 1; + + if(USBH_CBWData.CBWTransferLength != 0) + { + remLen = USBH_CBWData.CBWTransferLength; + pdBuff = USBH_BOTXfer.pDataBuffer; + + if((USBH_CBWData.CBWFlags & USB_REQ_DIR_MASK) == USB_REQ_D2H) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_DIN; + } + else + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_DOUT; + } + } + else // NO Data Transfer Stage + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CSW; + } + } + else if(resp == USBR_NAK) + { + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; + } + else if(resp == USBR_STALL) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_STALL_OUT; + } + else if(resp == USBR_ERROR) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_ERROR; + } + break; + + case USBH_MSC_BOT_DIN: + size = (remLen > USBH_MSC_Info.InEpSize) ? USBH_MSC_Info.InEpSize : remLen; + if(USBH_SendInPacket(phost->Device.Address, USBH_MSC_Info.InEp, USBH_MSC_Info.InEpDATAX, size)) + { + USBH_BOTXfer.BOTStateBkp = USBH_BOTXfer.BOTState; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_DIN_WAIT; + } + break; + + case USBH_MSC_BOT_DIN_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + BOT_StallCount = 0; + + USBH_MSC_Info.InEpDATAX ^= 1; + + if(remLen > USBH_MSC_Info.InEpSize) + { + USBH_ReadRxBuffer(pdBuff, USBH_MSC_Info.InEpSize); + + remLen -= USBH_MSC_Info.InEpSize; + pdBuff += USBH_MSC_Info.InEpSize; + + USBH_BOTXfer.BOTState = USBH_MSC_BOT_DIN; + } + else + { + USBH_ReadRxBuffer(pdBuff, remLen); + + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CSW; + } + } + else if(resp == USBR_NAK) + { + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; + } + else if(resp == USBR_STALL) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_STALL_IN; + } + else if(resp == USBR_ERROR) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_ERROR; + } + break; + + case USBH_MSC_BOT_DOUT: + size = (remLen > USBH_MSC_Info.OutEpSize) ? USBH_MSC_Info.OutEpSize : remLen; + if(USBH_SendOutPacket(phost->Device.Address, USBH_MSC_Info.OutEp, USBH_MSC_Info.OutEpDATAX, pdBuff, size)) + { + USBH_BOTXfer.BOTStateBkp = USBH_BOTXfer.BOTState; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_DOUT_WAIT; + } + break; + + case USBH_MSC_BOT_DOUT_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + BOT_StallCount = 0; + + USBH_MSC_Info.OutEpDATAX ^= 1; + + if(remLen > USBH_MSC_Info.OutEpSize) + { + remLen -= USBH_MSC_Info.OutEpSize; + pdBuff += USBH_MSC_Info.OutEpSize; + + USBH_BOTXfer.BOTState = USBH_MSC_BOT_DOUT; + } + else + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CSW; + } + } + else if(resp == USBR_NAK) + { + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; + } + else if(resp == USBR_STALL) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_STALL_OUT; + } + else if(resp == USBR_ERROR) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_ERROR; + } + break; + + case USBH_MSC_BOT_CSW: + if(USBH_SendInPacket(phost->Device.Address, USBH_MSC_Info.InEp, USBH_MSC_Info.InEpDATAX, MSC_CSW_LENGTH)) + { + USBH_BOTXfer.BOTStateBkp = USBH_BOTXfer.BOTState; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CSW_WAIT; + } + break; + + case USBH_MSC_BOT_CSW_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + BOT_StallCount = 0; + + USBH_MSC_Info.InEpDATAX ^= 1; + + USBH_ReadRxBuffer((uint8_t *)&USBH_CSWData, MSC_CSW_LENGTH); + USBH_BOTXfer.bCSWStatus = USBH_MSC_BOT_DecodeCSW(phost); + + USBH_BOTXfer.MSCState = USBH_BOTXfer.MSCStateBkp; + } + else if(resp == USBR_NAK) + { + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; + } + else if(resp == USBR_STALL) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_STALL_IN; + } + else if(resp == USBR_ERROR) + { + USBH_BOTXfer.BOTState = USBH_MSC_BOT_HANDLE_ERROR; + } + break; + + case USBH_MSC_BOT_HANDLE_ERROR: + BOT_ErrorCount++; + if(BOT_ErrorCount < 5) + { + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; // retry + } + else + { + USBH_BOTXfer.bCSWStatus = USBH_MSC_PHASE_ERROR; // unrecovered error + + USBH_BOTXfer.MSCState = USBH_BOTXfer.MSCStateBkp; + } + break; + + case USBH_MSC_BOT_HANDLE_STALL_IN: + stat = USBH_ClrFeature(phost, USBH_MSC_Info.InEp); + if(stat == USBH_OK) + { + USBH_MSC_Info.InEpDATAX = 0; + + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; + } + break; + + case USBH_MSC_BOT_HANDLE_STALL_OUT: + stat = USBH_ClrFeature(phost, USBH_MSC_Info.OutEp); + if(stat == USBH_OK) + { + USBH_MSC_Info.OutEpDATAX = 0; + + USBH_BOTXfer.BOTState = USBH_BOTXfer.BOTStateBkp; + } + break; + + default: + break; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_BOT_DecodeCSW() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint8_t USBH_MSC_BOT_DecodeCSW(USBH_Info_t *phost) +{ + uint8_t status; + + if(USBH_CSWData.CSWSignature == MSC_CSW_SIGNATURE) + { + if(USBH_CSWData.CSWTag == USBH_CBWData.CBWTag) + { + status = USBH_CSWData.CSWStatus; + } + else // CSW Tag Error + { + status = USBH_MSC_PHASE_ERROR; + } + } + else // CSW Signature Error + { + status = USBH_MSC_PHASE_ERROR; + } + + return status; +} + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_bot.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_bot.h new file mode 100644 index 0000000000..843103eeb8 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_bot.h @@ -0,0 +1,51 @@ +#ifndef __USBH_MSC_BOT_H__ +#define __USBH_MSC_BOT_H__ + +#include <stdint.h> + + +typedef enum { + USBH_MSC_BOT_CBW = 0, + USBH_MSC_BOT_CBW_WAIT, + USBH_MSC_BOT_DIN, + USBH_MSC_BOT_DIN_WAIT, + USBH_MSC_BOT_DOUT, + USBH_MSC_BOT_DOUT_WAIT, + USBH_MSC_BOT_CSW, + USBH_MSC_BOT_CSW_WAIT, + USBH_MSC_BOT_HANDLE_ERROR, + USBH_MSC_BOT_HANDLE_STALL_IN, + USBH_MSC_BOT_HANDLE_STALL_OUT, +} USBH_MSC_BOT_State; + + +typedef struct __attribute__((packed)) { + uint32_t CBWSignature; + uint32_t CBWTag; + uint32_t CBWTransferLength; + uint8_t CBWFlags; + uint8_t CBWLUN; + uint8_t CBWCBLength; + uint8_t CBWCB[16]; +} USBH_CBWPkt_t; + + +typedef struct __attribute__((packed)) { + uint32_t CSWSignature; + uint32_t CSWTag; + uint32_t CSWDataResidue; + uint8_t CSWStatus; +} USBH_CSWPkt_t; + + +extern USBH_CBWPkt_t USBH_CBWData; +extern USBH_CSWPkt_t USBH_CSWData; + + +void USBH_MSC_BOT_Init(void); +void USBH_MSC_BOT_Process(USBH_Info_t *phost); +uint8_t USBH_MSC_BOT_DecodeCSW(USBH_Info_t *phost); + + +#endif // __USBH_MSC_BOT_H__ + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_core.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_core.c new file mode 100644 index 0000000000..454712ab7a --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_core.c @@ -0,0 +1,287 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_msc_core.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_stdreq.h" +#include "usbh_msc_bot.h" +#include "usbh_msc_core.h" +#include "usbh_msc_scsi.h" + + +USBH_Class_cb_t USBH_MSC_cb = +{ + USBH_MSC_Init, + USBH_MSC_DeInit, + USBH_MSC_Request, + USBH_MSC_Process, +}; + + +volatile USBH_MSC_Info_t USBH_MSC_Info; +volatile USBH_BOTXfer_t USBH_BOTXfer; + + +static uint8_t DataInBuffer[64]; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_Init() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MSC_Init(USBH_Info_t *phost) +{ + USB_EpDesc_t *pEpIn, *pEpOut; + + if((phost->Device.Intf_Desc[0].bInterfaceClass == USB_MSC_CLASS) && \ + (phost->Device.Intf_Desc[0].bInterfaceProtocol == USB_MSC_BOT)) + { + if(phost->Device.Ep_Desc[0][0].bEndpointAddress & USB_EP_IN) + { + pEpIn = &phost->Device.Ep_Desc[0][0]; + pEpOut = &phost->Device.Ep_Desc[0][1]; + } + else + { + pEpIn = &phost->Device.Ep_Desc[0][1]; + pEpOut = &phost->Device.Ep_Desc[0][0]; + } + + USBH_MSC_Info.InEp = pEpIn->bEndpointAddress; + USBH_MSC_Info.InEpSize = pEpIn->wMaxPacketSize; + USBH_MSC_Info.OutEp = pEpOut->bEndpointAddress; + USBH_MSC_Info.OutEpSize = pEpOut->wMaxPacketSize; + + USBH_MSC_DeInit(phost); + } + else + { + if(phost->usr_cb->DeviceNotSupported) + phost->usr_cb->DeviceNotSupported(); + } + + return USBH_OK ; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_DeInit() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_MSC_DeInit(USBH_Info_t *phost) +{ + USBH_MSC_Info.Ready = 0; + USBH_MSC_Info.InEpDATAX = 0; + USBH_MSC_Info.OutEpDATAX = 0; + + USBH_MSC_BOT_Init(); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_Request() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MSC_Request(USBH_Info_t *phost) +{ + USBH_BOTXfer.MSCState = USBH_MSC_GET_MAXLUN; + + return USBH_OK; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_Process() +* 功能说明: MSC state machine handler +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MSC_Process(USBH_Info_t *phost) +{ + USBH_Status status = USBH_BUSY; + + uint8_t mscStatus; + uint8_t appStatus; + + switch(USBH_BOTXfer.MSCState) + { + case USBH_MSC_GET_MAXLUN: + status = USBH_MSC_getMaxLUN(phost); + if(status == USBH_OK) + { + USBH_MSC_Info.MaxLUN = DataInBuffer[0]; + + USBH_BOTXfer.MSCState = USBH_MSC_TEST_UNIT_READY; + } + else if(status == USBH_NOT_SUPPORTED) + { + /* 清除 STALL 后,进入 USBH_MSC_TEST_UNIT_READY */ + USBH_BOTXfer.MSCStateBkp = USBH_MSC_TEST_UNIT_READY; + + USBH_BOTXfer.MSCState = USBH_MSC_CLEAR_STALL; + } + break; + + case USBH_MSC_CLEAR_STALL: + status = USBH_ClrFeature(phost, USBH_MSC_Info.InEp); + if(status == USBH_OK) + { + USBH_MSC_Info.MaxLUN = 0; // 不支持 GetMaxLUN 请求,假设只有一个逻辑单元 + + USBH_BOTXfer.MSCState = USBH_BOTXfer.MSCStateBkp; + } + break; + + case USBH_MSC_TEST_UNIT_READY: + mscStatus = USBH_MSC_TestUnitReady(); + if(mscStatus == USBH_MSC_OK) + { + USBH_BOTXfer.MSCState = USBH_MSC_READ_CAPACITY10; + + status = USBH_OK; + } + else + { + USBH_MSC_ErrorHandle(mscStatus); + } + break; + + case USBH_MSC_READ_CAPACITY10: + mscStatus = USBH_MSC_ReadCapacity10(); + if(mscStatus == USBH_MSC_OK) + { + USBH_BOTXfer.MSCState = USBH_MSC_DEFAULT_APP; + + USBH_MSC_Info.Ready = 1; + + status = USBH_OK; + } + else + { + USBH_MSC_ErrorHandle(mscStatus); + } + break; + + case USBH_MSC_MODE_SENSE6: + /* Issue ModeSense6 SCSI command for detecting if device is write-protected */ + mscStatus = USBH_MSC_ModeSense6(); + if(mscStatus == USBH_MSC_OK) + { + USBH_BOTXfer.MSCState = USBH_MSC_DEFAULT_APP; + + status = USBH_OK; + } + else + { + USBH_MSC_ErrorHandle(mscStatus); + } + break; + + case USBH_MSC_DEFAULT_APP: + /* Process Application callback for MSC */ + appStatus = phost->usr_cb->UserApplication(); + if(appStatus == 1) + { + /* De-init requested from application layer */ + status = USBH_APPLY_DEINIT; + } + break; + + case USBH_MSC_BOT_TRANSFER: + USBH_MSC_BOT_Process(phost); + break; + + case USBH_MSC_UNRECOVERED_STATE: + status = USBH_UNRECOVERED_ERROR; + break; + + case USBH_MSC_REQUEST_SENSE: + /* Issue RequestSense SCSI command for retrieving error code */ + mscStatus = USBH_MSC_RequestSense(); + if(mscStatus == USBH_MSC_OK) + { + USBH_BOTXfer.MSCState = USBH_BOTXfer.MSCStateBkp; + + status = USBH_OK; + } + else + { + USBH_MSC_ErrorHandle(mscStatus); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_getMaxLUN() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MSC_getMaxLUN(USBH_Info_t *phost) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_D2H | USB_REQ_CLASS | USB_REQ_TO_INTERFACE; + + phost->Ctrl.setup.bRequest = 0xFE; + phost->Ctrl.setup.wValue = 0; + phost->Ctrl.setup.wIndex = 0; + phost->Ctrl.setup.wLength = 1; + + return USBH_CtrlTransfer(phost, DataInBuffer , 1); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_ErrorHandle() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_MSC_ErrorHandle(uint8_t status) +{ + if(status == USBH_MSC_FAIL) + { + /* Try MSC level error recovery, Issue the request Sense to get Drive error reason */ + USBH_BOTXfer.MSCState = USBH_MSC_REQUEST_SENSE; + } + else if(status == USBH_MSC_PHASE_ERROR) + { + /* Phase error, Go to Unrecovered state */ + USBH_BOTXfer.MSCState = USBH_MSC_UNRECOVERED_STATE; + } +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_core.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_core.h new file mode 100644 index 0000000000..3ddab02fd1 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_core.h @@ -0,0 +1,66 @@ +#ifndef __USBH_MSC_CORE_H__ +#define __USBH_MSC_CORE_H__ + +#include <stdint.h> +#include "usbh_core.h" + + +typedef enum { + USBH_MSC_GET_MAXLUN = 0, + USBH_MSC_TEST_UNIT_READY, + USBH_MSC_READ_CAPACITY10, + USBH_MSC_MODE_SENSE6, + USBH_MSC_REQUEST_SENSE, + USBH_MSC_BOT_TRANSFER, + USBH_MSC_DEFAULT_APP, + USBH_MSC_CLEAR_STALL, + USBH_MSC_UNRECOVERED_STATE +} USBH_MSC_State; + + +typedef struct { + uint8_t InEp; + uint8_t OutEp; + uint16_t InEpSize; + uint16_t OutEpSize; + uint8_t InEpDATAX; + uint8_t OutEpDATAX; + + uint8_t Ready; + uint8_t MaxLUN; // Max Logic Unit Number + uint32_t Capacity; + uint16_t PageSize; + uint8_t WProtect; // Write Protect + uint32_t SenseKey; +} USBH_MSC_Info_t; + + +typedef struct { + uint8_t MSCState; + uint8_t MSCStateBkp; + uint8_t BOTState; + uint8_t BOTStateBkp; + uint8_t bCSWStatus; // CSW.bCSWStatus + uint8_t *pDataBuffer; + uint8_t UDiskReady; +} USBH_BOTXfer_t; + + +extern volatile USBH_MSC_Info_t USBH_MSC_Info; +extern volatile USBH_BOTXfer_t USBH_BOTXfer; + + +extern USBH_Class_cb_t USBH_MSC_cb; + + +USBH_Status USBH_MSC_Init(USBH_Info_t *phost); +void USBH_MSC_DeInit(USBH_Info_t *phost); +USBH_Status USBH_MSC_Request(USBH_Info_t *phost); +USBH_Status USBH_MSC_Process(USBH_Info_t *phost); + +USBH_Status USBH_MSC_getMaxLUN(USBH_Info_t *phost); +void USBH_MSC_ErrorHandle(uint8_t status); + + +#endif // __USBH_MSC_CORE_H__ + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_scsi.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_scsi.c new file mode 100644 index 0000000000..05ec905d0c --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_scsi.c @@ -0,0 +1,366 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_msc_scsi.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_msc_bot.h" +#include "usbh_msc_core.h" +#include "usbh_msc_scsi.h" + + +#define OPCODE_TEST_UNIT_READY 0X00 +#define OPCODE_READ_CAPACITY10 0x25 +#define OPCODE_MODE_SENSE6 0x1A +#define OPCODE_READ10 0x28 +#define OPCODE_WRITE10 0x2A +#define OPCODE_REQUEST_SENSE 0x03 + +#define DATLEN_READ_CAPACITY10 8 // Data Stage Length +#define DATLEN_MODE_SENSE6 63 +#define DATLEN_REQUEST_SENSE 18 + + +static uint8_t SCSI_Busy = 0; + +static uint8_t DataInBuffer[64]; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_TestUnitReady() +* 功能说明: Issues 'Test unit ready' command to the device. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_MSC_Status USBH_MSC_TestUnitReady(void) +{ + USBH_MSC_Status status = USBH_MSC_BUSY; + + if(!SCSI_Busy) + { + USBH_CBWData.CBWTransferLength = 0; // No Data Stage + USBH_CBWData.CBWCBLength = 6; + USBH_CBWData.CBWCB[0] = OPCODE_TEST_UNIT_READY; + for(uint8_t i = 1; i < 16; i++) USBH_CBWData.CBWCB[i] = 0; + + USBH_BOTXfer.bCSWStatus = USBH_MSC_BUSY; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW; + + USBH_BOTXfer.MSCStateBkp = USBH_BOTXfer.MSCState; + USBH_BOTXfer.MSCState = USBH_MSC_BOT_TRANSFER; + + SCSI_Busy = 1; + } + else + { + if(USBH_BOTXfer.bCSWStatus != USBH_MSC_BUSY) + { + status = USBH_BOTXfer.bCSWStatus; + + SCSI_Busy = 0; + } + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_ReadCapacity10() +* 功能说明: Issue the read capacity command to the device. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_MSC_Status USBH_MSC_ReadCapacity10(void) +{ + USBH_MSC_Status status = USBH_MSC_BUSY; + + if(!SCSI_Busy) + { + USBH_CBWData.CBWTransferLength = DATLEN_READ_CAPACITY10; + USBH_CBWData.CBWFlags = USB_REQ_D2H; + USBH_CBWData.CBWCBLength = 10; + USBH_CBWData.CBWCB[0] = OPCODE_READ_CAPACITY10; + for(uint8_t i = 1; i < 16; i++) USBH_CBWData.CBWCB[i] = 0; + + USBH_BOTXfer.pDataBuffer = DataInBuffer; + + USBH_BOTXfer.bCSWStatus = USBH_MSC_BUSY; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW; + + USBH_BOTXfer.MSCStateBkp = USBH_BOTXfer.MSCState; + USBH_BOTXfer.MSCState = USBH_MSC_BOT_TRANSFER; + + SCSI_Busy = 1; + } + else + { + if(USBH_BOTXfer.bCSWStatus != USBH_MSC_BUSY) + { + if(USBH_BOTXfer.bCSWStatus == USBH_MSC_OK) + { + /* assign the capacity */ + ((uint8_t *)&USBH_MSC_Info.Capacity)[3] = DataInBuffer[0]; + ((uint8_t *)&USBH_MSC_Info.Capacity)[2] = DataInBuffer[1]; + ((uint8_t *)&USBH_MSC_Info.Capacity)[1] = DataInBuffer[2]; + ((uint8_t *)&USBH_MSC_Info.Capacity)[0] = DataInBuffer[3]; + + /* assign the page length */ + ((uint8_t *)&USBH_MSC_Info.PageSize)[1] = DataInBuffer[6]; + ((uint8_t *)&USBH_MSC_Info.PageSize)[0] = DataInBuffer[7]; + } + + status = USBH_BOTXfer.bCSWStatus; + + SCSI_Busy = 0; + } + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_ModeSense6() +* 功能说明: Issue the Mode Sense6 Command to the device. +* Used for reading the WriteProtect Status of the Mass-Storage device. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_MSC_Status USBH_MSC_ModeSense6(void) +{ + USBH_MSC_Status status = USBH_MSC_BUSY; + + if(!SCSI_Busy) + { + USBH_CBWData.CBWTransferLength = DATLEN_MODE_SENSE6; + USBH_CBWData.CBWFlags = USB_REQ_D2H; + USBH_CBWData.CBWCBLength = 10; + USBH_CBWData.CBWCB[0] = OPCODE_MODE_SENSE6; + USBH_CBWData.CBWCB[1] = 0x00; + USBH_CBWData.CBWCB[2] = 0x3F; + USBH_CBWData.CBWCB[3] = 0x00; + USBH_CBWData.CBWCB[4] = DATLEN_MODE_SENSE6; + for(uint8_t i = 5; i < 16; i++) USBH_CBWData.CBWCB[i] = 0; + + USBH_BOTXfer.pDataBuffer = DataInBuffer; + + USBH_BOTXfer.bCSWStatus = USBH_MSC_BUSY; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW; + + USBH_BOTXfer.MSCStateBkp = USBH_BOTXfer.MSCState; + USBH_BOTXfer.MSCState = USBH_MSC_BOT_TRANSFER; + + SCSI_Busy = 1; + } + else + { + if(USBH_BOTXfer.bCSWStatus != USBH_MSC_BUSY) + { + if(USBH_BOTXfer.bCSWStatus == USBH_MSC_OK) + { + /* Assign the Write Protect status */ + if(DataInBuffer[2] & 0x80) + { + USBH_MSC_Info.WProtect = 1; + } + else + { + USBH_MSC_Info.WProtect = 0; + } + } + + status = USBH_BOTXfer.bCSWStatus; + + SCSI_Busy = 0; + } + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_Read10() +* 功能说明: Issue the read command to the device. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_MSC_Status USBH_MSC_Read10(uint8_t *buffer, uint32_t address, uint32_t nbOfbytes) +{ + USBH_MSC_Status status = USBH_MSC_BUSY; + uint16_t nbOfPages; + + if(!SCSI_Busy) + { + USBH_CBWData.CBWTransferLength = nbOfbytes; + USBH_CBWData.CBWFlags = USB_REQ_D2H; + USBH_CBWData.CBWCBLength = 10; + USBH_CBWData.CBWCB[0] = OPCODE_READ10; + USBH_CBWData.CBWCB[1] = 0x00; + /*logical block address*/ + USBH_CBWData.CBWCB[2] = ((uint8_t *)&address)[3]; + USBH_CBWData.CBWCB[3] = ((uint8_t *)&address)[2]; + USBH_CBWData.CBWCB[4] = ((uint8_t *)&address)[1]; + USBH_CBWData.CBWCB[5] = ((uint8_t *)&address)[0]; + USBH_CBWData.CBWCB[6] = 0x00; + /*Transfer length */ + nbOfPages = nbOfbytes / USBH_MSC_Info.PageSize; + USBH_CBWData.CBWCB[7] = ((uint8_t *)&nbOfPages)[1]; + USBH_CBWData.CBWCB[8] = ((uint8_t *)&nbOfPages)[0]; + for(uint8_t i = 9; i < 16; i++) USBH_CBWData.CBWCB[i] = 0; + + USBH_BOTXfer.pDataBuffer = buffer; + + USBH_BOTXfer.bCSWStatus = USBH_MSC_BUSY; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW; + + USBH_BOTXfer.MSCStateBkp = USBH_BOTXfer.MSCState; + USBH_BOTXfer.MSCState = USBH_MSC_BOT_TRANSFER; + + SCSI_Busy = 1; + } + else + { + if(USBH_BOTXfer.bCSWStatus != USBH_MSC_BUSY) + { + status = USBH_BOTXfer.bCSWStatus; + + SCSI_Busy = 0; + } + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_Write10() +* 功能说明: Issue the write command to the device. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_MSC_Status USBH_MSC_Write10(uint8_t *buffer, uint32_t address, uint32_t nbOfbytes) +{ + USBH_MSC_Status status = USBH_MSC_BUSY; + uint16_t nbOfPages; + + if(!SCSI_Busy) + { + USBH_CBWData.CBWTransferLength = nbOfbytes; + USBH_CBWData.CBWFlags = USB_REQ_H2D; + USBH_CBWData.CBWCBLength = 10; + USBH_CBWData.CBWCB[0] = OPCODE_WRITE10; + USBH_CBWData.CBWCB[1] = 0x00; + /*logical block address*/ + USBH_CBWData.CBWCB[2] = ((uint8_t *)&address)[3]; + USBH_CBWData.CBWCB[3] = ((uint8_t *)&address)[2]; + USBH_CBWData.CBWCB[4] = ((uint8_t *)&address)[1]; + USBH_CBWData.CBWCB[5] = ((uint8_t *)&address)[0]; + USBH_CBWData.CBWCB[6] = 0x00; + /*Transfer length */ + nbOfPages = nbOfbytes / USBH_MSC_Info.PageSize; + USBH_CBWData.CBWCB[7] = ((uint8_t *)&nbOfPages)[1]; + USBH_CBWData.CBWCB[8] = ((uint8_t *)&nbOfPages)[0]; + for(uint8_t i = 9; i < 16; i++) USBH_CBWData.CBWCB[i] = 0; + + USBH_BOTXfer.pDataBuffer = buffer; + + USBH_BOTXfer.bCSWStatus = USBH_MSC_BUSY; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW; + + USBH_BOTXfer.MSCStateBkp = USBH_BOTXfer.MSCState; + USBH_BOTXfer.MSCState = USBH_MSC_BOT_TRANSFER; + + SCSI_Busy = 1; + } + else + { + if(USBH_BOTXfer.bCSWStatus != USBH_MSC_BUSY) + { + status = USBH_BOTXfer.bCSWStatus; + + SCSI_Busy = 0; + } + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MSC_RequestSense() +* 功能说明: Issues the Request Sense command to the device. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_MSC_Status USBH_MSC_RequestSense(void) +{ + USBH_MSC_Status status = USBH_MSC_BUSY; + + if(!SCSI_Busy) + { + USBH_CBWData.CBWTransferLength = DATLEN_REQUEST_SENSE; + USBH_CBWData.CBWFlags = USB_REQ_D2H; + USBH_CBWData.CBWCBLength = 6; + USBH_CBWData.CBWCB[0] = OPCODE_REQUEST_SENSE; + USBH_CBWData.CBWCB[1] = 0x00; + USBH_CBWData.CBWCB[2] = 0x00; + USBH_CBWData.CBWCB[3] = 0x00; + USBH_CBWData.CBWCB[4] = DATLEN_REQUEST_SENSE; + for(uint8_t i = 5; i < 16; i++) USBH_CBWData.CBWCB[i] = 0; + + USBH_BOTXfer.pDataBuffer = DataInBuffer; + + USBH_BOTXfer.bCSWStatus = USBH_MSC_BUSY; + USBH_BOTXfer.BOTState = USBH_MSC_BOT_CBW; + + USBH_BOTXfer.MSCState = USBH_MSC_BOT_TRANSFER; + + SCSI_Busy = 1; + } + else + { + if(USBH_BOTXfer.bCSWStatus != USBH_MSC_BUSY) + { + if(USBH_BOTXfer.bCSWStatus == USBH_MSC_OK) + { + /* Assign Sense data*/ + ((uint8_t *)&USBH_MSC_Info.SenseKey)[3] = DataInBuffer[0]; + ((uint8_t *)&USBH_MSC_Info.SenseKey)[2] = DataInBuffer[1]; + ((uint8_t *)&USBH_MSC_Info.SenseKey)[1] = DataInBuffer[2]; + ((uint8_t *)&USBH_MSC_Info.SenseKey)[0] = DataInBuffer[3]; + + status = USBH_MSC_OK; + } + + status = USBH_BOTXfer.bCSWStatus; + + SCSI_Busy = 0; + } + } + + return status; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_scsi.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_scsi.h new file mode 100644 index 0000000000..39e0220d1f --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MSC/usbh_msc_scsi.h @@ -0,0 +1,24 @@ +#ifndef __USBH_MSC_SCSI_H__ +#define __USBH_MSC_SCSI_H__ + +#include <stdint.h> + + +typedef enum { + USBH_MSC_OK = 0, + USBH_MSC_FAIL, + USBH_MSC_PHASE_ERROR, + USBH_MSC_BUSY = 0xFF, +} USBH_MSC_Status; // 见 CSW.bCSWStatus 取值 + + +USBH_MSC_Status USBH_MSC_TestUnitReady(void); +USBH_MSC_Status USBH_MSC_ReadCapacity10(void); +USBH_MSC_Status USBH_MSC_ModeSense6(void); +USBH_MSC_Status USBH_MSC_RequestSense(void); +USBH_MSC_Status USBH_MSC_Read10(uint8_t *buffer, uint32_t address, uint32_t nbOfbytes); +USBH_MSC_Status USBH_MSC_Write10(uint8_t *buffer, uint32_t address, uint32_t nbOfbytes); + + +#endif //__USBH_MSC_SCSI_H__ + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp.c new file mode 100644 index 0000000000..2b78377dd4 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp.c @@ -0,0 +1,1366 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_mtp.c +* 功能说明: This file is the MTP Layer Handlers for USB Host MTP class. +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <stdlib.h> +#include <string.h> +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_mtp.h" + + +static USBH_Status USBH_MTP_Init(USBH_Info_t *phost); +static void USBH_MTP_DeInit(USBH_Info_t *phost); +static USBH_Status USBH_MTP_Request(USBH_Info_t *phost); +static USBH_Status USBH_MTP_Process(USBH_Info_t *phost); + +USBH_Class_cb_t USBH_MTP_cb = +{ + USBH_MTP_Init, + USBH_MTP_DeInit, + USBH_MTP_Request, + USBH_MTP_Process, +}; + + +USBH_MTP_Info_t USBH_MTP_Info; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_Init() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static USBH_Status USBH_MTP_Init(USBH_Info_t *phost) +{ + USB_EpDesc_t *pEpIn, *pEpOut, *pEpNotify; + + for(int i = 0; i < phost->Device.Cfg_Desc.bNumInterfaces; i++) + { + if(((phost->Device.Intf_Desc[i].bInterfaceClass == USB_MTP_CLASS) && (phost->Device.Intf_Desc[i].bNumEndpoints == 3)) || + ((phost->Device.Intf_Desc[i].bInterfaceClass == 0xFF) && (phost->Device.Intf_Desc[i].bNumEndpoints == 3))) + { +#define EpVerify(ep, dir, type) (((phost->Device.Ep_Desc[i][ep].bEndpointAddress & USB_EP_IN) == dir) && \ + ((phost->Device.Ep_Desc[i][ep].bmAttributes & USB_EP_INT) == type)) + if(EpVerify(0, USB_EP_IN, USB_EP_INT) && EpVerify(1, USB_EP_IN, USB_EP_BULK) && EpVerify(2, USB_EP_OUT, USB_EP_BULK)) + { + pEpNotify = &phost->Device.Ep_Desc[i][0]; + pEpIn = &phost->Device.Ep_Desc[i][1]; + pEpOut = &phost->Device.Ep_Desc[i][2]; + } + else if(EpVerify(0, USB_EP_IN, USB_EP_INT) && EpVerify(2, USB_EP_IN, USB_EP_BULK) && EpVerify(1, USB_EP_OUT, USB_EP_BULK)) + { + pEpNotify = &phost->Device.Ep_Desc[i][0]; + pEpIn = &phost->Device.Ep_Desc[i][2]; + pEpOut = &phost->Device.Ep_Desc[i][1]; + } + else if(EpVerify(1, USB_EP_IN, USB_EP_INT) && EpVerify(0, USB_EP_IN, USB_EP_BULK) && EpVerify(2, USB_EP_OUT, USB_EP_BULK)) + { + pEpNotify = &phost->Device.Ep_Desc[i][1]; + pEpIn = &phost->Device.Ep_Desc[i][0]; + pEpOut = &phost->Device.Ep_Desc[i][2]; + } + else if(EpVerify(1, USB_EP_IN, USB_EP_INT) && EpVerify(2, USB_EP_IN, USB_EP_BULK) && EpVerify(0, USB_EP_OUT, USB_EP_BULK)) + { + pEpNotify = &phost->Device.Ep_Desc[i][1]; + pEpIn = &phost->Device.Ep_Desc[i][2]; + pEpOut = &phost->Device.Ep_Desc[i][0]; + } + else if(EpVerify(2, USB_EP_IN, USB_EP_INT) && EpVerify(0, USB_EP_IN, USB_EP_BULK) && EpVerify(1, USB_EP_OUT, USB_EP_BULK)) + { + pEpNotify = &phost->Device.Ep_Desc[i][2]; + pEpIn = &phost->Device.Ep_Desc[i][0]; + pEpOut = &phost->Device.Ep_Desc[i][1]; + } + else if(EpVerify(2, USB_EP_IN, USB_EP_INT) && EpVerify(1, USB_EP_IN, USB_EP_BULK) && EpVerify(0, USB_EP_OUT, USB_EP_BULK)) + { + pEpNotify = &phost->Device.Ep_Desc[i][2]; + pEpIn = &phost->Device.Ep_Desc[i][1]; + pEpOut = &phost->Device.Ep_Desc[i][0]; + } + else + { + continue; + } + + USBH_MTP_Info.InEp = pEpIn->bEndpointAddress; + USBH_MTP_Info.InEpSize = pEpIn->wMaxPacketSize; + USBH_MTP_Info.OutEp = pEpOut->bEndpointAddress; + USBH_MTP_Info.OutEpSize = pEpOut->wMaxPacketSize; + USBH_MTP_Info.NotifyEp = pEpNotify->bEndpointAddress; + USBH_MTP_Info.NotifyEpSize = pEpNotify->wMaxPacketSize; + + USBH_MTP_Info.events.poll = pEpNotify->bInterval; + + SW_LOG_INFO("InEp: %x, InEpSize: %d", pEpIn->bEndpointAddress, pEpIn->wMaxPacketSize); + SW_LOG_INFO("OutEp: %x, OutEpSize: %d", pEpOut->bEndpointAddress, pEpOut->wMaxPacketSize); + SW_LOG_INFO("NotifyEp: %x, NotifyEpSize: %d, NotifyInterval: %d", pEpNotify->bEndpointAddress, pEpNotify->wMaxPacketSize, pEpNotify->bInterval); + + USBH_MTP_DeInit(phost); + + return USBH_OK; + } + else + { + continue; + } + } + + if(phost->usr_cb->DeviceNotSupported) + phost->usr_cb->DeviceNotSupported(); + + return USBH_NOT_SUPPORTED; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_DeInit() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static void USBH_MTP_DeInit(USBH_Info_t *phost) +{ + USBH_MTP_Info.is_ready = 0; + + USBH_MTP_Info.InEpDATAX = 0; + USBH_MTP_Info.OutEpDATAX = 0; + USBH_MTP_Info.NotifyEpDATAX = 0; + + USBH_MTP_Info.XferState = USBH_MTP_XFER_IDLE; + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + + USBH_MTP_Info.state = USBH_MTP_GETDEVICEINFO; + USBH_MTP_Info.stateReq = USBH_MTP_IDLE; + + SW_LOG_INFO("USBH_MTP_DeInit"); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_Request() +* 功能说明: Used for handling Standard requests for MTP class. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static USBH_Status USBH_MTP_Request(USBH_Info_t *phost) +{ + return USBH_OK; +} + + +void USBH_MTP_XferProcess(USBH_Info_t *phost); +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_Process() +* 功能说明: Used for managing state machine for MTP data transfers. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +static USBH_Status USBH_MTP_Process(USBH_Info_t *phost) +{ + USBH_Resp resp; + USBH_Status status = USBH_BUSY; + + if((USBH_MTP_Info.state != USBH_MTP_EVENT_WAIT) && + (USBH_MTP_Info.state != USBH_MTP_EVENT_CHECK)) + { + if(USBH_MTP_Info.stateReq != USBH_MTP_IDLE) + { + USBH_MTP_Info.stateBkp = USBH_MTP_Info.state; + USBH_MTP_Info.state = USBH_MTP_Info.stateReq; + + USBH_MTP_Info.stateReq = USBH_MTP_IDLE; + } + } + + switch(USBH_MTP_Info.state) + { + case USBH_MTP_GETDEVICEINFO: + status = USBH_MTP_GetDeviceInfo(phost, &USBH_MTP_Info.devinfo); + if(status == USBH_OK) + { + SW_LOG_INFO("MTP Device Information"); + SW_LOG_INFO(" Standard version : %x", USBH_MTP_Info.devinfo.StandardVersion); + SW_LOG_INFO(" Vendor ExtID : %s", USBH_MTP_Info.devinfo.VendorExtensionID == 6 ? "MTP" : "NOT SUPPORTED"); + SW_LOG_INFO(" Functional mode : %s", USBH_MTP_Info.devinfo.FunctionalMode == 0 ? "Standard" : "Vendor"); + SW_LOG_INFO(" Number of Supported Operation(s) : %d", USBH_MTP_Info.devinfo.OperationsSupportedNbr); + SW_LOG_INFO(" Number of Supported Events(s) : %d", USBH_MTP_Info.devinfo.EventsSupportedNbr); + SW_LOG_INFO(" Number of Supported Proprieties : %d", USBH_MTP_Info.devinfo.DevicePropertiesSupportedNbr); + SW_LOG_INFO(" Manufacturer : %s", USBH_MTP_Info.devinfo.Manufacturer); + SW_LOG_INFO(" Model : %s", USBH_MTP_Info.devinfo.Model); + SW_LOG_INFO(" Device version : %s", USBH_MTP_Info.devinfo.DeviceVersion); + SW_LOG_INFO(" Serial number : %s", USBH_MTP_Info.devinfo.SerialNumber); + + USBH_MTP_Info.state = USBH_MTP_OPENSESSION; + } + break; + + case USBH_MTP_OPENSESSION: + status = USBH_MTP_OpenSession(phost, 1); + if(status == USBH_OK) + { + SW_LOG_INFO("MTP Session #1 Opened"); + + USBH_MTP_Info.state = USBH_MTP_GETSTORAGEIDS; + } + break; + + case USBH_MTP_GETSTORAGEIDS: + status = USBH_MTP_GetStorageIds(phost, &USBH_MTP_Info.storids); + if(status == USBH_OK) + { + SW_LOG_INFO("Number of storage ID items : %d", USBH_MTP_Info.storids.n); + for(int i = 0; i < USBH_MTP_Info.storids.n; i++) + { + SW_LOG_INFO("storage#%d ID : %x", i, USBH_MTP_Info.storids.Storage[i]); + } + + USBH_MTP_Info.CurrentStorage = 0; + if(USBH_MTP_Info.storids.n) + USBH_MTP_Info.state = USBH_MTP_GETSTORAGEINFO; + } + break; + + case USBH_MTP_GETSTORAGEINFO: + status = USBH_MTP_GetStorageInfo(phost, USBH_MTP_Info.storids.Storage[USBH_MTP_Info.CurrentStorage], + &USBH_MTP_Info.storinfo[USBH_MTP_Info.CurrentStorage]); + if(status == USBH_OK) + { + SW_LOG_INFO("Volume#%u: %s [%s]", USBH_MTP_Info.CurrentStorage, USBH_MTP_Info.storinfo[USBH_MTP_Info.CurrentStorage].StorageDescription, + USBH_MTP_Info.storinfo[USBH_MTP_Info.CurrentStorage].VolumeLabel); + USBH_MTP_Info.is_ready = 1; + USBH_MTP_Info.state = USBH_MTP_IDLE; + } + break; + + case USBH_MTP_IDLE: + if(abs((int)USBH->FRAMENR - (int)USBH_MTP_Info.events.timer) >= USBH_MTP_Info.events.poll) + { + USBH_MTP_Info.events.timer = USBH->FRAMENR; + + USBH_MTP_Info.state = USBH_MTP_EVENT; + } + else + { + status = USBH_OK; + } + break; + + case USBH_MTP_EVENT_CHECK: + if(abs((int)USBH->FRAMENR - (int)USBH_MTP_Info.events.timer) >= USBH_MTP_Info.events.poll) + { + USBH_MTP_Info.events.timer = USBH->FRAMENR; + + USBH_MTP_Info.state = USBH_MTP_EVENT; + } + else + { + USBH_MTP_Info.state = USBH_MTP_TRANSFER; // Event 查询是在数据传输中间插入的,返回数据传输 + } + break; + + case USBH_MTP_EVENT: + if(USBH_SendInPacket(phost->Device.Address, USBH_MTP_Info.NotifyEp, USBH_MTP_Info.NotifyEpDATAX, USBH_MTP_Info.NotifyEpSize)) + { + USBH_MTP_Info.state = USBH_MTP_EVENT_WAIT; + } + break; + + case USBH_MTP_EVENT_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + USBH_MTP_Info.NotifyEpDATAX ^= 1; + + USBH_ReadRxBuffer((uint8_t *)&USBH_MTP_Info.events.container, USBH_MTP_Info.NotifyEpSize); + + USBH_MTP_EventsCallback(phost, USBH_MTP_Info.events.container.code, USBH_MTP_Info.events.container.param1); + } + + if((USBH_MTP_Info.XferState == USBH_MTP_XFER_DATA_OUT) || + (USBH_MTP_Info.XferState == USBH_MTP_XFER_DATA_IN)) + { + USBH_MTP_Info.state = USBH_MTP_TRANSFER; // Event 查询是在数据传输中间插入的,返回数据传输 + } + else + { + USBH_MTP_Info.state = USBH_MTP_IDLE; + } + break; + + case USBH_MTP_TRANSFER: + USBH_MTP_XferProcess(phost); + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_XferProcess() +* 功能说明: +* 输 入: USBH_Info_t *phost +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_MTP_XferProcess(USBH_Info_t *phost) +{ + USBH_Resp resp; + uint32_t size; + + USBH_MTP_Info.XferStatus = USBH_BUSY; + + switch(USBH_MTP_Info.XferState) + { + case USBH_MTP_XFER_OP_REQ: + if(USBH_SendOutPacket(phost->Device.Address, USBH_MTP_Info.OutEp, USBH_MTP_Info.OutEpDATAX, (uint8_t *)&USBH_MTP_Info.op_container, USBH_MTP_Info.op_container.length)) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ_WAIT; + } + break; + + case USBH_MTP_XFER_OP_REQ_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + USBH_MTP_Info.OutEpDATAX ^= 1; + + if(USBH_MTP_Info.flags == PTP_DP_NODATA) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_RESP; + } + else if(USBH_MTP_Info.flags == PTP_DP_SENDDATA) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_OUT; + } + else if(USBH_MTP_Info.flags == PTP_DP_GETDATA) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_IN; + } + } + else if(resp == USBR_NAK) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; // Resend Request + } + else if(resp == USBR_STALL) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_ERROR; + } + break; + + case USBH_MTP_XFER_DATA_OUT: + size = USBH_MTP_Info.data_len > USBH_MTP_Info.OutEpSize ? USBH_MTP_Info.OutEpSize : USBH_MTP_Info.data_len; + if(USBH_SendOutPacket(phost->Device.Address, USBH_MTP_Info.OutEp, USBH_MTP_Info.OutEpDATAX, USBH_MTP_Info.data_ptr, size)) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_OUT_WAIT; + } + break; + + case USBH_MTP_XFER_DATA_OUT_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + USBH_MTP_Info.OutEpDATAX ^= 1; + + if(USBH_MTP_Info.data_len > USBH_MTP_Info.OutEpSize) + { + USBH_MTP_Info.data_ptr += USBH_MTP_Info.OutEpSize; + USBH_MTP_Info.data_len -= USBH_MTP_Info.OutEpSize; + } + else + { + USBH_MTP_Info.data_len = 0; + } + + if(USBH_MTP_Info.data_len > 0) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_OUT; + } + else + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_RESP; + } + } + else if(resp == USBR_NAK) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_OUT; // Resend same data + + USBH_MTP_Info.state = USBH_MTP_EVENT_CHECK; // 从机返回 NAK 时,主机查询一下是否需要执行 Event 查询 + } + else if(resp == USBR_STALL) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_ERROR; + } + break; + + case USBH_MTP_XFER_DATA_IN: + if(USBH_SendInPacket(phost->Device.Address, USBH_MTP_Info.InEp, USBH_MTP_Info.InEpDATAX, USBH_MTP_Info.InEpSize)) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_IN_WAIT; + } + break; + + case USBH_MTP_XFER_DATA_IN_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + USBH_MTP_Info.InEpDATAX ^= 1; + + uint32_t len = USBH_ReadRxBuffer(USBH_MTP_Info.data_ptr, USBH_MTP_Info.InEpSize); + + if(USBH_MTP_Info.first_packet) + { + USBH_MTP_Info.data_len = *(uint32_t *)(void *)USBH_MTP_Info.data_ptr; + + if(USBH_MTP_Info.first_packet == 3) + { + len -= PTP_USB_BULK_HDR_LEN; + USBH_MTP_Info.data_len -= PTP_USB_BULK_HDR_LEN; + memcpy(USBH_MTP_Info.data_ptr, USBH_MTP_Info.data_ptr + PTP_USB_BULK_HDR_LEN, len); + } + + USBH_MTP_Info.first_packet = 0; + } + + USBH_MTP_Info.data_ptr += len; + USBH_MTP_Info.data_len -= len; + + if((USBH_MTP_Info.data_len > 0) || (len == USBH_MTP_Info.InEpSize)) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_IN; + } + else + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_RESP; + } + } + else if(resp == USBR_NAK) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_DATA_IN; + + USBH_MTP_Info.state = USBH_MTP_EVENT_CHECK; // 从机返回 NAK 时,主机查询一下是否需要执行 Event 查询 + } + else if(resp == USBR_STALL) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_ERROR; + } + break; + + case USBH_MTP_XFER_RESP: + if(USBH_SendInPacket(phost->Device.Address, USBH_MTP_Info.InEp, USBH_MTP_Info.InEpDATAX, USBH_MTP_Info.InEpSize)) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_RESP_WAIT; + } + break; + + case USBH_MTP_XFER_RESP_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + USBH_MTP_Info.InEpDATAX ^= 1; + + USBH_ReadRxBuffer((uint8_t *)&USBH_MTP_Info.resp_container, USBH_MTP_Info.InEpSize); + + if(USBH_MTP_Info.resp_container.code == PTP_RC_OK) + { + USBH_MTP_Info.XferStatus = USBH_OK; + } + else + { + USBH_MTP_Info.XferStatus = USBH_FAIL; + } + USBH_MTP_Info.state = USBH_MTP_Info.stateBkp; + } + else if(resp == USBR_NAK) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_RESP; + } + else if(resp == USBR_STALL) + { + USBH_MTP_Info.XferState = USBH_MTP_XFER_ERROR; + } + break; + + case USBH_MTP_XFER_ERROR: + USBH_MTP_Info.XferStatus = USBH_FAIL; + USBH_MTP_Info.state = USBH_MTP_Info.stateBkp; + break; + + default: + break; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetDeviceInfo() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetDeviceInfo(USBH_Info_t *phost, PTP_DeviceInfo_t *dev_info) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetDeviceInfo; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 0; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + PTP_DecodeDeviceInfo(phost, dev_info); + } + break; + + default: + break; + } + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_OpenSession() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_OpenSession(USBH_Info_t *phost, uint32_t session) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Init session params */ + USBH_MTP_Info.transaction_id = 0x00000000U; + USBH_MTP_Info.session_id = session; + USBH_MTP_Info.flags = PTP_DP_NODATA; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_OpenSession; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = session; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 1; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetStorageIds() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetStorageIds(USBH_Info_t *phost, PTP_StorageIDs_t *storage_ids) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetStorageIDs; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 0; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + storage_ids->n = PTP_GetArray32(storage_ids->Storage, USBH_MTP_Info.data_container.payload, 0U); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetStorageInfo() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetStorageInfo(USBH_Info_t *phost, uint32_t storage_id, PTP_StorageInfo_t *storage_info) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetStorageInfo; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = storage_id; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 1; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + PTP_DecodeStorageInfo(phost, storage_info); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetNumObjects() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetNumObjects(USBH_Info_t *phost, uint32_t storage_id, uint32_t format, uint32_t folder, uint32_t *numobs) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_NODATA; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetNumObjects; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = storage_id; + USBH_MTP_Info.op_container.param2 = format; + USBH_MTP_Info.op_container.param3 = folder; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 3; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + *numobs = USBH_MTP_Info.resp_container.param1; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetObjectHandles() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetObjectHandles(USBH_Info_t *phost, uint32_t storage_id, uint32_t format, uint32_t folder, PTP_ObjectHandles_t *handles) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetObjectHandles; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = storage_id; + USBH_MTP_Info.op_container.param2 = format; + USBH_MTP_Info.op_container.param3 = folder; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 3; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + handles->n = PTP_GetArray32(handles->Handler, USBH_MTP_Info.data_container.payload, 0U); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetObjectInfo() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetObjectInfo(USBH_Info_t *phost, uint32_t handle, PTP_ObjectInfo_t *object_info) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetObjectInfo; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = handle; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 1; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + PTP_DecodeObjectInfo(phost, object_info); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetObject() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetObject(USBH_Info_t *phost, uint32_t handle, uint8_t *object) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = object; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 3; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetObject; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = handle; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 1; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetPartialObject() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetPartialObject(USBH_Info_t *phost, uint32_t handle, uint32_t offset, uint32_t maxbytes, uint8_t *object, uint32_t *len) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = object; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 3; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetPartialObject; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = handle; + USBH_MTP_Info.op_container.param2 = offset; + USBH_MTP_Info.op_container.param3 = maxbytes; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 3; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + *len = USBH_MTP_Info.resp_container.param1; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_DeleteObject() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_DeleteObject(USBH_Info_t *phost, uint32_t handle, uint32_t format) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_NODATA; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_DeleteObject; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = handle; + USBH_MTP_Info.op_container.param2 = format; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 2; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_SendObject() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_SendObject(USBH_Info_t *phost, uint32_t handle, uint8_t *object, uint32_t size) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_SENDDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = size + PTP_USB_BULK_HDR_LEN; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_SendObject; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 0; + + /* Fill data_container */ + USBH_MTP_Info.data_container.length = USBH_MTP_Info.data_len; + USBH_MTP_Info.data_container.type = PTP_USB_CONTAINER_DATA; + USBH_MTP_Info.data_container.code = USBH_MTP_Info.op_container.code; + USBH_MTP_Info.data_container.trans_id = USBH_MTP_Info.op_container.trans_id; + memcpy(USBH_MTP_Info.data_container.payload, object, size); + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetDevicePropDesc() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetDevicePropDesc(USBH_Info_t *phost, uint16_t propcode, PTP_DevicePropDesc_t *devicepropertydesc) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetDevicePropDesc; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = propcode; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 1; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + uint8_t *data = USBH_MTP_Info.data_container.payload; + + devicepropertydesc->DevicePropertyCode = PTP_LE16(&data[PTP_dpd_DevicePropertyCode]); + devicepropertydesc->DataType = PTP_LE16(&data[PTP_dpd_DataType]); + devicepropertydesc->GetSet = *(uint8_t *)(&data[PTP_dpd_GetSet]); + devicepropertydesc->FormFlag = PTP_DPFF_None; + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetObjectPropsSupported() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetObjectPropsSupported(USBH_Info_t *phost, uint16_t ofc, uint32_t *propnum, uint16_t *props) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetObjectPropsSupported; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = ofc; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 1; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + *propnum = PTP_GetArray16(props, USBH_MTP_Info.data_container.payload, 0U); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetObjectPropDesc() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetObjectPropDesc(USBH_Info_t *phost, uint16_t opc, uint16_t ofc, PTP_ObjectPropDesc_t *opd) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetObjectPropDesc; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = opc; + USBH_MTP_Info.op_container.param2 = ofc; + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 2; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + PTP_DecodeObjectPropDesc(phost, opd, USBH_MTP_Info.data_len); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_GetObjectPropList() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_MTP_GetObjectPropList(USBH_Info_t *phost, uint32_t handle, MTP_Properties_t *pprops, uint32_t *nrofprops) +{ + USBH_Status status = USBH_BUSY; + + switch(USBH_MTP_Info.OpState) + { + case USBH_MTP_OP_SEND: + /* Set operation request type */ + USBH_MTP_Info.flags = PTP_DP_GETDATA; + USBH_MTP_Info.data_ptr = (uint8_t *)(void *)&USBH_MTP_Info.data_container; + USBH_MTP_Info.data_len = 0; + USBH_MTP_Info.first_packet = 1; + + /* Fill operation request params */ + USBH_MTP_Info.op_container.type = PTP_USB_CONTAINER_COMMAND; + USBH_MTP_Info.op_container.code = PTP_OC_GetObjPropList; + USBH_MTP_Info.op_container.trans_id = USBH_MTP_Info.transaction_id++; + USBH_MTP_Info.op_container.param1 = handle; + USBH_MTP_Info.op_container.param2 = 0x00000000U; /* 0x00000000U should be "all formats" */ + USBH_MTP_Info.op_container.param3 = 0xFFFFFFFFU; /* 0xFFFFFFFFU should be "all properties" */ + USBH_MTP_Info.op_container.param4 = 0x00000000U; + USBH_MTP_Info.op_container.param5 = 0xFFFFFFFFU; /* Return full tree below the Param1 handle */ + USBH_MTP_Info.op_container.length = PTP_USB_BULK_HDR_LEN + sizeof(uint32_t) * 5; + + /* Setup State machine and start transfer */ + USBH_MTP_Info.XferState = USBH_MTP_XFER_OP_REQ; + USBH_MTP_Info.OpState = USBH_MTP_OP_WAIT; + + USBH_MTP_Info.stateReq = USBH_MTP_TRANSFER; + break; + + case USBH_MTP_OP_WAIT: + if(USBH_MTP_Info.XferStatus != USBH_BUSY) + { + status = USBH_MTP_Info.XferStatus; + USBH_MTP_Info.XferStatus = USBH_BUSY; + + USBH_MTP_Info.OpState = USBH_MTP_OP_SEND; + } + if(status == USBH_OK) + { + PTP_DecodeObjectPropList(phost, pprops, USBH_MTP_Info.data_len); + } + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_MTP_EventsCallback() +* 功能说明: The function informs that host has received an event +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +__attribute__((weak)) void USBH_MTP_EventsCallback(USBH_Info_t *phost, uint32_t event, uint32_t param) +{ +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp.h new file mode 100644 index 0000000000..f74a6e1f77 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp.h @@ -0,0 +1,153 @@ +#ifndef __USBH_MTP_H__ +#define __USBH_MTP_H__ + +#include "usbh_mtp_ptp.h" + + +typedef enum { + USBH_MTP_IDLE = 0, + USBH_MTP_GETDEVICEINFO, + USBH_MTP_OPENSESSION, + USBH_MTP_GETSTORAGEIDS, + USBH_MTP_GETSTORAGEINFO, + USBH_MTP_TRANSFER, + USBH_MTP_EVENT, + USBH_MTP_EVENT_WAIT, + + /* Events may be interleaved within a data stream during a transaction. + It may be assumed that the Operation Request Phase and Response Phase are atomic, but the Data Phase + must allow for events to be communicated in either direction without interrupting data transfer. + */ + USBH_MTP_EVENT_CHECK, +} USBH_MTP_State; + +typedef enum { + USBH_MTP_OP_IDLE = 0, + USBH_MTP_OP_SEND, + USBH_MTP_OP_WAIT, + USBH_MTP_OP_ERROR, +} USBH_MTP_OpState; + +typedef enum { + USBH_MTP_XFER_IDLE = 0, + USBH_MTP_XFER_OP_REQ, + USBH_MTP_XFER_OP_REQ_WAIT, + USBH_MTP_XFER_DATA_OUT, + USBH_MTP_XFER_DATA_OUT_WAIT, + USBH_MTP_XFER_DATA_IN, + USBH_MTP_XFER_DATA_IN_WAIT, + USBH_MTP_XFER_RESP, + USBH_MTP_XFER_RESP_WAIT, + USBH_MTP_XFER_ERROR, +} USBH_MTP_XferState; + + +typedef struct { + uint32_t timer; + uint16_t poll; + PTP_EventContainer_t container; +} MTP_EventHandle_t; + + +typedef struct { + uint8_t InEp; + uint8_t OutEp; + uint8_t NotifyEp; + uint16_t InEpSize; + uint16_t OutEpSize; + uint16_t NotifyEpSize; + uint8_t InEpDATAX; + uint8_t OutEpDATAX; + uint8_t NotifyEpDATAX; + + USBH_MTP_State state; + USBH_MTP_State stateReq; + USBH_MTP_State stateBkp; + + USBH_MTP_OpState OpState; + USBH_MTP_XferState XferState; + + USBH_Status XferStatus; + + PTP_OpContainer_t op_container; + PTP_DataContainer_t data_container; + PTP_RespContainer_t resp_container; + + uint32_t session_id; + uint32_t transaction_id; + + uint32_t flags; + + uint8_t *data_ptr; + uint32_t data_len; + uint8_t first_packet; // 1 数据第一帧 3 数据第一帧,且需丢弃 header 不存储 + + PTP_DeviceInfo_t devinfo; + PTP_StorageIDs_t storids; + PTP_StorageInfo_t storinfo[PTP_MAX_STORAGE_UNITS_NBR]; + + MTP_EventHandle_t events; + + uint32_t CurrentStorage; + uint32_t is_ready; +} USBH_MTP_Info_t; + +extern USBH_MTP_Info_t USBH_MTP_Info; + + +static uint32_t USBH_MTP_Ready(void) +{ + return USBH_MTP_Info.is_ready; +} + +static uint32_t USBH_MTP_StorageCount(void) +{ + return USBH_MTP_Info.storids.n; +} + +static uint32_t USBH_MTP_Storage(uint32_t index) +{ + return USBH_MTP_Info.storids.Storage[index]; +} + + +USBH_Status USBH_MTP_GetDeviceInfo(USBH_Info_t *phost, PTP_DeviceInfo_t *dev_info); + +USBH_Status USBH_MTP_OpenSession(USBH_Info_t *phost, uint32_t session); + +USBH_Status USBH_MTP_GetStorageIds(USBH_Info_t *phost, PTP_StorageIDs_t *storage_ids); +USBH_Status USBH_MTP_GetStorageInfo(USBH_Info_t *phost, uint32_t storage_id, PTP_StorageInfo_t *storage_info); + +USBH_Status USBH_MTP_GetNumObjects(USBH_Info_t *phost, uint32_t storage_id, uint32_t format, uint32_t folder, uint32_t *numobs); +USBH_Status USBH_MTP_GetObjectHandles(USBH_Info_t *phost, uint32_t storage_id, uint32_t format, uint32_t folder, PTP_ObjectHandles_t *handles); + +USBH_Status USBH_MTP_GetObjectInfo(USBH_Info_t *phost, uint32_t handle, PTP_ObjectInfo_t *object_info); + +USBH_Status USBH_MTP_GetObject(USBH_Info_t *phost, uint32_t handle, uint8_t *object); +USBH_Status USBH_MTP_GetPartialObject(USBH_Info_t *phost, uint32_t handle, uint32_t offset, uint32_t maxbytes, uint8_t *object, uint32_t *len); + +USBH_Status USBH_MTP_DeleteObject(USBH_Info_t *phost, uint32_t handle, uint32_t format); +USBH_Status USBH_MTP_SendObject(USBH_Info_t *phost, uint32_t handle, uint8_t *object, uint32_t size); + +USBH_Status USBH_MTP_GetDevicePropDesc(USBH_Info_t *phost, uint16_t propcode, PTP_DevicePropDesc_t *devicepropertydesc); + +USBH_Status USBH_MTP_GetObjectPropsSupported(USBH_Info_t *phost, uint16_t ofc, uint32_t *propnum, uint16_t *props); +USBH_Status USBH_MTP_GetObjectPropDesc(USBH_Info_t *phost, uint16_t opc, uint16_t ofc, PTP_ObjectPropDesc_t *opd); +USBH_Status USBH_MTP_GetObjectPropList(USBH_Info_t *phost, uint32_t handle, MTP_Properties_t *pprops, uint32_t *nrofprops); + + +void USBH_MTP_EventsCallback(USBH_Info_t *phost, uint32_t event, uint32_t param); + + +#define USBH_TObreak(ms) \ + { \ + static int start; \ + start = USBH->FRAMENR; \ + if(abs((int)USBH->FRAMENR - start) > ms) \ + { \ + break; \ + } \ + } + + +#endif // __USBH_MTP_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp_ptp.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp_ptp.c new file mode 100644 index 0000000000..42fed1eb28 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp_ptp.c @@ -0,0 +1,376 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_mtp.c +* 功能说明: This file includes the PTP operations layer. +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <string.h> +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_mtp.h" + + +/****************************************************************************************************************************************** +* 函数名称: PTP_GetDevicePropValue() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PTP_GetDevicePropValue(USBH_Info_t *phost, uint32_t *offset, uint32_t total, PTP_PropertyValue_t *value, uint16_t datatype) +{ + uint8_t *data = USBH_MTP_Info.data_container.payload; + uint16_t len; + switch(datatype) + { + case PTP_DTC_INT8: + value->i8 = *(int8_t *)(void *) & (data[*offset]); + *offset += 1U; + break; + + case PTP_DTC_UINT8: + value->u8 = *(uint8_t *) & (data[*offset]); + *offset += 1U; + break; + + case PTP_DTC_INT16: + value->i16 = *(int16_t *)(void *) & (data[*offset]); + *offset += 2U; + break; + + case PTP_DTC_UINT16: + value->u16 = PTP_LE16(&(data[*offset])); + *offset += 2U; + break; + + case PTP_DTC_INT32: + value->i32 = *(int32_t *)(void *)(&(data[*offset])); + *offset += 4U; + break; + + case PTP_DTC_UINT32: + value->u32 = PTP_LE32(&(data[*offset])); + *offset += 4U; + break; + + case PTP_DTC_INT64: + value->i64 = *(int64_t *)(void *)(&(data[*offset])); + *offset += 8U; + break; + + case PTP_DTC_UINT64: + value->u64 = PTP_LE64(&(data[*offset])); + *offset += 8U; + break; + + case PTP_DTC_UINT128: + *offset += 16U; + break; + + case PTP_DTC_INT128: + *offset += 16U; + break; + + case PTP_DTC_STR: + PTP_GetString((uint8_t *)(void *)value->str, (uint8_t *) & (data[*offset]), &len); + *offset += (uint32_t)(len * 2U) + 1U; + break; + + default: + break; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_GetString() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PTP_GetString(uint8_t *str, uint8_t *data, uint16_t *len) +{ + uint16_t strlength; + uint16_t idx; + + *len = data[0]; + strlength = (uint16_t)(2U * (uint32_t)data[0]); + data ++; /* Adjust the offset ignoring the String Len */ + + for (idx = 0U; idx < strlength; idx += 2U) + { + /* Copy Only the string and ignore the UNICODE ID, hence add the src */ + *str = data[idx]; + str++; + } + *str = 0U; /* mark end of string */ +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_GetArray16() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t PTP_GetArray16(uint16_t *array, uint8_t *data, uint32_t offset) +{ + uint32_t size, idx = 0U; + + size = PTP_LE32(&data[offset]); + while(size > idx) + { + array[idx] = (uint16_t)data[offset + (sizeof(uint16_t) * (idx + 2U))]; + idx++; + } + return size; +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_GetArray32() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t PTP_GetArray32(uint32_t *array, uint8_t *data, uint32_t offset) +{ + uint32_t size, idx = 0U; + + size = PTP_LE32(&data[offset]); + while(size > idx) + { + array[idx] = PTP_LE32(&data[offset + (sizeof(uint32_t) * (idx + 1U))]); + idx++; + } + return size; +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_DecodeDeviceInfo() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PTP_DecodeDeviceInfo(USBH_Info_t *phost, PTP_DeviceInfo_t *dev_info) +{ + uint8_t *data = USBH_MTP_Info.data_container.payload; + uint32_t totallen; + uint16_t len; + + dev_info->StandardVersion = PTP_LE16(&data[PTP_di_StandardVersion]); + dev_info->VendorExtensionID = PTP_LE32(&data[PTP_di_VendorExtensionID]); + dev_info->VendorExtensionVersion = PTP_LE16(&data[PTP_di_VendorExtensionVersion]); + PTP_GetString(dev_info->VendorExtensionDesc, &data[PTP_di_VendorExtensionDesc], &len); + + totallen = (uint32_t)(len * 2U) + 1U; + dev_info->FunctionalMode = PTP_LE16(&data[PTP_di_FunctionalMode + totallen]); + dev_info->OperationsSupportedNbr = PTP_GetArray16((uint16_t *)(void *)&dev_info->OperationsSupported, data, PTP_di_OperationsSupported + totallen); + + totallen = totallen + (dev_info->OperationsSupportedNbr * sizeof(uint16_t)) + sizeof(uint32_t); + dev_info->EventsSupportedNbr = PTP_GetArray16((uint16_t *)(void *)&dev_info->EventsSupported, data, PTP_di_OperationsSupported + totallen); + + totallen = totallen + (dev_info->EventsSupportedNbr * sizeof(uint16_t)) + sizeof(uint32_t); + dev_info->DevicePropertiesSupportedNbr = PTP_GetArray16((uint16_t *)(void *)&dev_info->DevicePropertiesSupported, data, PTP_di_OperationsSupported + totallen); + + totallen = totallen + (dev_info->DevicePropertiesSupportedNbr * sizeof(uint16_t)) + sizeof(uint32_t); + + dev_info->CaptureFormatsNbr = PTP_GetArray16((uint16_t *)(void *)&dev_info->CaptureFormats, data, PTP_di_OperationsSupported + totallen); + + totallen = totallen + (dev_info->CaptureFormatsNbr * sizeof(uint16_t)) + sizeof(uint32_t); + dev_info->ImageFormatsNbr = PTP_GetArray16((uint16_t *)(void *)&dev_info->ImageFormats, data, PTP_di_OperationsSupported + totallen); + + totallen = totallen + (dev_info->ImageFormatsNbr * sizeof(uint16_t)) + sizeof(uint32_t); + PTP_GetString(dev_info->Manufacturer, &data[PTP_di_OperationsSupported + totallen], &len); + + totallen += (uint32_t)(len * 2U) + 1U; + PTP_GetString(dev_info->Model, &data[PTP_di_OperationsSupported + totallen], &len); + + totallen += (uint32_t)(len * 2U) + 1U; + PTP_GetString(dev_info->DeviceVersion, &data[PTP_di_OperationsSupported + totallen], &len); + + totallen += (uint32_t)(len * 2U) + 1U; + PTP_GetString(dev_info->SerialNumber, &data[PTP_di_OperationsSupported + totallen], &len); +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_DecodeStorageInfo() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PTP_DecodeStorageInfo(USBH_Info_t *phost, PTP_StorageInfo_t *storage_info) +{ + uint8_t *data = USBH_MTP_Info.data_container.payload; + uint16_t len; + + storage_info->StorageType = PTP_LE16(&data[PTP_si_StorageType]); + storage_info->FilesystemType = PTP_LE16(&data[PTP_si_FilesystemType]); + storage_info->AccessCapability = PTP_LE16(&data[PTP_si_AccessCapability]); + storage_info->MaxCapability = PTP_LE64(&data[PTP_si_MaxCapability]); + storage_info->FreeSpaceInBytes = PTP_LE64(&data[PTP_si_FreeSpaceInBytes]); + storage_info->FreeSpaceInImages = PTP_LE32(&data[PTP_si_FreeSpaceInImages]); + + PTP_GetString(storage_info->StorageDescription, &data[PTP_si_StorageDescription], &len); + PTP_GetString(storage_info->VolumeLabel, &data[PTP_si_StorageDescription + (len * 2U) + 1U], &len); +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_DecodeObjectInfo() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PTP_DecodeObjectInfo(USBH_Info_t *phost, PTP_ObjectInfo_t *object_info) +{ + uint8_t *data = USBH_MTP_Info.data_container.payload; + uint16_t filenamelen; + + object_info->StorageID = PTP_LE32(&data[PTP_oi_StorageID]); + object_info->ObjectFormat = PTP_LE16(&data[PTP_oi_ObjectFormat]); + object_info->ProtectionStatus = PTP_LE16(&data[PTP_oi_ProtectionStatus]); + object_info->ObjectCompressedSize = PTP_LE64(&data[PTP_oi_ObjectCompressedSize]); + + /* For Samsung Galaxy */ + if((data[PTP_oi_filenamelen] == 0U) && (data[PTP_oi_filenamelen + 4U] != 0U)) + { + data += 4; + } + object_info->ThumbFormat = PTP_LE16(&data[PTP_oi_ThumbFormat]); + object_info->ThumbCompressedSize = PTP_LE32(&data[PTP_oi_ThumbCompressedSize]); + object_info->ThumbPixWidth = PTP_LE32(&data[PTP_oi_ThumbPixWidth]); + object_info->ThumbPixHeight = PTP_LE32(&data[PTP_oi_ThumbPixHeight]); + object_info->ImagePixWidth = PTP_LE32(&data[PTP_oi_ImagePixWidth]); + object_info->ImagePixHeight = PTP_LE32(&data[PTP_oi_ImagePixHeight]); + object_info->ImageBitDepth = PTP_LE32(&data[PTP_oi_ImageBitDepth]); + object_info->ParentObject = PTP_LE32(&data[PTP_oi_ParentObject]); + object_info->AssociationType = PTP_LE16(&data[PTP_oi_AssociationType]); + object_info->AssociationDesc = PTP_LE32(&data[PTP_oi_AssociationDesc]); + object_info->SequenceNumber = PTP_LE32(&data[PTP_oi_SequenceNumber]); + PTP_GetString(object_info->Filename, &data[PTP_oi_filenamelen], &filenamelen); +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_DecodeObjectPropDesc() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void PTP_DecodeObjectPropDesc(USBH_Info_t *phost, PTP_ObjectPropDesc_t *opd, uint32_t opdlen) +{ + uint8_t *data = USBH_MTP_Info.data_container.payload; + uint32_t offset = 0U, i; + + opd->ObjectPropertyCode = PTP_LE16(&data[PTP_opd_ObjectPropertyCode]); + opd->DataType = PTP_LE16(&data[PTP_opd_DataType]); + opd->GetSet = *(uint8_t *)(&data[PTP_opd_GetSet]); + + offset = PTP_opd_FactoryDefaultValue; + PTP_GetDevicePropValue(phost, &offset, opdlen, &opd->FactoryDefaultValue, opd->DataType); + + opd->GroupCode = PTP_LE32(&data[offset]); + offset += sizeof(uint32_t); + + opd->FormFlag = *(uint8_t *)(&data[offset]); + offset += sizeof(uint8_t); + + switch(opd->FormFlag) + { + case PTP_OPFF_Range: + PTP_GetDevicePropValue(phost, &offset, opdlen, &opd->FORM.Range.MinimumValue, opd->DataType); + PTP_GetDevicePropValue(phost, &offset, opdlen, &opd->FORM.Range.MaximumValue, opd->DataType); + PTP_GetDevicePropValue(phost, &offset, opdlen, &opd->FORM.Range.StepSize, opd->DataType); + break; + + case PTP_OPFF_Enumeration: + opd->FORM.Enum.NumberOfValues = PTP_LE16(&data[offset]); + offset += sizeof(uint16_t); + + for(i = 0U; i < opd->FORM.Enum.NumberOfValues ; i++) + { + PTP_GetDevicePropValue(phost, &offset, opdlen, &opd->FORM.Enum.SupportedValue[i], opd->DataType); + } + break; + + default: + break; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: PTP_DecodeObjectPropList() +* 功能说明: +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +uint32_t PTP_DecodeObjectPropList(USBH_Info_t *phost, MTP_Properties_t *props, uint32_t len) +{ + uint8_t *data = USBH_MTP_Info.data_container.payload; + uint32_t prop_count; + uint32_t offset = 0U, i; + + prop_count = PTP_LE32(data); + if(prop_count == 0U) + { + return 0; + } + + data += sizeof(uint32_t); + len -= sizeof(uint32_t); + + for(i = 0U; i < prop_count; i++) + { + if(len <= 0U) + { + return 0; + } + + props[i].ObjectHandle = PTP_LE32(data); + data += sizeof(uint32_t); + len -= sizeof(uint32_t); + + props[i].property = PTP_LE16(data); + data += sizeof(uint16_t); + len -= sizeof(uint16_t); + + props[i].datatype = PTP_LE16(data); + data += sizeof(uint16_t); + len -= sizeof(uint16_t); + + offset = 0U; + + PTP_GetDevicePropValue(phost, &offset, len, &props[i].propval, props[i].datatype); + + data += offset; + len -= offset; + } + + return prop_count; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp_ptp.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp_ptp.h new file mode 100644 index 0000000000..aee37df260 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/MTP/usbh_mtp_ptp.h @@ -0,0 +1,758 @@ +#ifndef __USBH_MTP_PTP_H__ +#define __USBH_MTP_PTP_H__ + +#include <stdint.h> + +#define PTP_USB_BULK_HDR_LEN ((2 * sizeof(uint32_t)) + (2 * sizeof(uint16_t))) + +typedef struct { + uint32_t length; + uint16_t type; + uint16_t code; + uint32_t trans_id; + uint32_t param1; + uint32_t param2; + uint32_t param3; + uint32_t param4; + uint32_t param5; +} PTP_OpContainer_t; + +typedef struct { + uint32_t length; + uint16_t type; + uint16_t code; + uint32_t trans_id; + uint8_t payload[4096]; +} PTP_DataContainer_t; + +typedef struct { + uint32_t length; + uint16_t type; + uint16_t code; + uint32_t trans_id; + uint32_t param1; + uint32_t param2; + uint32_t param3; + uint32_t param4; + uint32_t param5; +} PTP_RespContainer_t; + +/* PTP USB Asynchronous Event Interrupt Data Format */ +typedef struct { + uint32_t length; + uint16_t type; + uint16_t code; + uint32_t trans_id; + uint32_t param1; + uint32_t param2; + uint32_t param3; +} PTP_EventContainer_t; + + +/* Operation Codes */ + +/* PTP v1.0 operation codes */ +#define PTP_OC_Undefined 0x1000U +#define PTP_OC_GetDeviceInfo 0x1001U +#define PTP_OC_OpenSession 0x1002U +#define PTP_OC_CloseSession 0x1003U +#define PTP_OC_GetStorageIDs 0x1004U +#define PTP_OC_GetStorageInfo 0x1005U +#define PTP_OC_GetNumObjects 0x1006U +#define PTP_OC_GetObjectHandles 0x1007U +#define PTP_OC_GetObjectInfo 0x1008U +#define PTP_OC_GetObject 0x1009U +#define PTP_OC_GetThumb 0x100AU +#define PTP_OC_DeleteObject 0x100BU +#define PTP_OC_SendObjectInfo 0x100CU +#define PTP_OC_SendObject 0x100DU +#define PTP_OC_InitiateCapture 0x100EU +#define PTP_OC_FormatStore 0x100FU +#define PTP_OC_ResetDevice 0x1010U +#define PTP_OC_SelfTest 0x1011U +#define PTP_OC_SetObjectProtection 0x1012U +#define PTP_OC_PowerDown 0x1013U +#define PTP_OC_GetDevicePropDesc 0x1014U +#define PTP_OC_GetDevicePropValue 0x1015U +#define PTP_OC_SetDevicePropValue 0x1016U +#define PTP_OC_ResetDevicePropValue 0x1017U +#define PTP_OC_TerminateOpenCapture 0x1018U +#define PTP_OC_MoveObject 0x1019U +#define PTP_OC_CopyObject 0x101AU +#define PTP_OC_GetPartialObject 0x101BU +#define PTP_OC_InitiateOpenCapture 0x101CU + +/* PTP v1.1 operation codes */ +#define PTP_OC_StartEnumHandles 0x101DU +#define PTP_OC_EnumHandles 0x101EU +#define PTP_OC_StopEnumHandles 0x101FU +#define PTP_OC_GetVendorExtensionMaps 0x1020U +#define PTP_OC_GetVendorDeviceInfo 0x1021U +#define PTP_OC_GetResizedImageObject 0x1022U +#define PTP_OC_GetFilesystemManifest 0x1023U +#define PTP_OC_GetStreamInfo 0x1024U +#define PTP_OC_GetStream 0x1025U + +/* Microsoft / MTP extension codes */ +#define PTP_OC_GetObjectPropsSupported 0x9801U +#define PTP_OC_GetObjectPropDesc 0x9802U +#define PTP_OC_GetObjectPropValue 0x9803U +#define PTP_OC_SetObjectPropValue 0x9804U +#define PTP_OC_GetObjPropList 0x9805U +#define PTP_OC_SetObjPropList 0x9806U +#define PTP_OC_GetInterdependendPropdesc 0x9807U +#define PTP_OC_SendObjectPropList 0x9808U +#define PTP_OC_GetObjectReferences 0x9810U +#define PTP_OC_SetObjectReferences 0x9811U +#define PTP_OC_UpdateDeviceFirmware 0x9812U +#define PTP_OC_Skip 0x9820U + + +/* Response Codes */ + +/* PTP v1.0 response codes */ +#define PTP_RC_Undefined 0x2000U +#define PTP_RC_OK 0x2001U +#define PTP_RC_GeneralError 0x2002U +#define PTP_RC_SessionNotOpen 0x2003U +#define PTP_RC_InvalidTransactionID 0x2004U +#define PTP_RC_OperationNotSupported 0x2005U +#define PTP_RC_ParameterNotSupported 0x2006U +#define PTP_RC_IncompleteTransfer 0x2007U +#define PTP_RC_InvalidStorageId 0x2008U +#define PTP_RC_InvalidObjectHandle 0x2009U +#define PTP_RC_DevicePropNotSupported 0x200AU +#define PTP_RC_InvalidObjectFormatCode 0x200BU +#define PTP_RC_StoreFull 0x200CU +#define PTP_RC_ObjectWriteProtected 0x200DU +#define PTP_RC_StoreReadOnly 0x200EU +#define PTP_RC_AccessDenied 0x200FU +#define PTP_RC_NoThumbnailPresent 0x2010U +#define PTP_RC_SelfTestFailed 0x2011U +#define PTP_RC_PartialDeletion 0x2012U +#define PTP_RC_StoreNotAvailable 0x2013U +#define PTP_RC_SpecByFormatUnsupported 0x2014U +#define PTP_RC_NoValidObjectInfo 0x2015U +#define PTP_RC_InvalidCodeFormat 0x2016U +#define PTP_RC_UnknownVendorCode 0x2017U +#define PTP_RC_CaptureAlreadyTerminated 0x2018U +#define PTP_RC_DeviceBusy 0x2019U +#define PTP_RC_InvalidParentObject 0x201AU +#define PTP_RC_InvalidDevicePropFormat 0x201BU +#define PTP_RC_InvalidDevicePropValue 0x201CU +#define PTP_RC_InvalidParameter 0x201DU +#define PTP_RC_SessionAlreadyOpened 0x201EU +#define PTP_RC_TransactionCanceled 0x201FU +#define PTP_RC_SpecOfDestinationUnsupported 0x2020U + +/* PTP v1.1 response codes */ +#define PTP_RC_InvalidEnumHandle 0x2021U +#define PTP_RC_NoStreamEnabled 0x2022U +#define PTP_RC_InvalidDataSet 0x2023U + + +/* USB container types */ +#define PTP_USB_CONTAINER_UNDEFINED 0x0000U +#define PTP_USB_CONTAINER_COMMAND 0x0001U +#define PTP_USB_CONTAINER_DATA 0x0002U +#define PTP_USB_CONTAINER_RESPONSE 0x0003U +#define PTP_USB_CONTAINER_EVENT 0x0004U + + +/* Transaction data phase description */ +#define PTP_DP_NODATA 0x0000U // no data phase +#define PTP_DP_SENDDATA 0x0001U // sending data +#define PTP_DP_GETDATA 0x0002U // receiving data +#define PTP_DP_DATA_MASK 0x00ffU // data phase mask + + +/* DeviceInfo data offset */ +#define PTP_di_StandardVersion 0U +#define PTP_di_VendorExtensionID 2U +#define PTP_di_VendorExtensionVersion 6U +#define PTP_di_VendorExtensionDesc 8U +#define PTP_di_FunctionalMode 8U +#define PTP_di_OperationsSupported 10U + +/* Max info items size */ +#define PTP_SUPPORTED_OPERATIONS_NBR 100U +#define PTP_SUPPORTED_EVENTS_NBR 100U +#define PTP_SUPPORTED_PROPRIETIES_NBR 100U +#define PTP_CAPTURE_FORMATS_NBR 100U +#define PTP_IMAGE_FORMATS_NBR 100U +#define PTP_MAX_STR_SIZE 255U + +/* PTP device info structure */ +typedef struct { + uint16_t StandardVersion; + uint32_t VendorExtensionID; + uint16_t VendorExtensionVersion; + uint8_t VendorExtensionDesc[PTP_MAX_STR_SIZE]; + uint16_t FunctionalMode; + uint32_t OperationsSupportedNbr; + uint16_t OperationsSupported[PTP_SUPPORTED_OPERATIONS_NBR]; + uint32_t EventsSupportedNbr; + uint16_t EventsSupported[PTP_SUPPORTED_EVENTS_NBR]; + uint32_t DevicePropertiesSupportedNbr; + uint16_t DevicePropertiesSupported[PTP_SUPPORTED_PROPRIETIES_NBR]; + uint32_t CaptureFormatsNbr; + uint16_t CaptureFormats[PTP_CAPTURE_FORMATS_NBR]; + uint32_t ImageFormatsNbr; + uint16_t ImageFormats[PTP_IMAGE_FORMATS_NBR]; + uint8_t Manufacturer[PTP_MAX_STR_SIZE]; + uint8_t Model[PTP_MAX_STR_SIZE]; + uint8_t DeviceVersion[PTP_MAX_STR_SIZE]; + uint8_t SerialNumber[PTP_MAX_STR_SIZE]; +} PTP_DeviceInfo_t; + + +#define PTP_MAX_STORAGE_UNITS_NBR 3 + +/* PTP storageIDs structute (returned by GetStorageIDs) */ +typedef struct { + uint32_t n; + uint32_t Storage[PTP_MAX_STORAGE_UNITS_NBR]; +} PTP_StorageIDs_t; + + +/* PTP StorageInfo structure (returned by GetStorageInfo) */ +#define PTP_si_StorageType 0U +#define PTP_si_FilesystemType 2U +#define PTP_si_AccessCapability 4U +#define PTP_si_MaxCapability 6U +#define PTP_si_FreeSpaceInBytes 14U +#define PTP_si_FreeSpaceInImages 22U +#define PTP_si_StorageDescription 26U + +/* PTP Storage Types */ +#define PTP_ST_Undefined 0x0000U +#define PTP_ST_FixedROM 0x0001U +#define PTP_ST_RemovableROM 0x0002U +#define PTP_ST_FixedRAM 0x0003U +#define PTP_ST_RemovableRAM 0x0004U + +/* PTP FilesystemType Values */ +#define PTP_FST_Undefined 0x0000U +#define PTP_FST_GenericFlat 0x0001U +#define PTP_FST_GenericHierarchical 0x0002U +#define PTP_FST_DCF 0x0003U + +/* PTP StorageInfo AccessCapability Values */ +#define PTP_AC_ReadWrite 0x0000U +#define PTP_AC_ReadOnly 0x0001U +#define PTP_AC_ReadOnly_with_Object_Deletion 0x0002U + +typedef struct { + uint16_t StorageType; + uint16_t FilesystemType; + uint16_t AccessCapability; + uint64_t MaxCapability; + uint64_t FreeSpaceInBytes; + uint32_t FreeSpaceInImages; + uint8_t StorageDescription[PTP_MAX_STR_SIZE]; + uint8_t VolumeLabel[PTP_MAX_STR_SIZE]; +} PTP_StorageInfo_t; + + +/* PTP Object Format Codes */ +/* ancillary formats */ +#define PTP_OFC_Undefined 0x3000U +#define PTP_OFC_Defined 0x3800U +#define PTP_OFC_Association 0x3001U +#define PTP_OFC_Script 0x3002U +#define PTP_OFC_Executable 0x3003U +#define PTP_OFC_Text 0x3004U +#define PTP_OFC_HTML 0x3005U +#define PTP_OFC_DPOF 0x3006U +#define PTP_OFC_AIFF 0x3007U +#define PTP_OFC_WAV 0x3008U +#define PTP_OFC_MP3 0x3009U +#define PTP_OFC_AVI 0x300AU +#define PTP_OFC_MPEG 0x300BU +#define PTP_OFC_ASF 0x300CU +#define PTP_OFC_QT 0x300DU /* guessing */ +/* image formats */ +#define PTP_OFC_EXIF_JPEG 0x3801U +#define PTP_OFC_TIFF_EP 0x3802U +#define PTP_OFC_FlashPix 0x3803U +#define PTP_OFC_BMP 0x3804U +#define PTP_OFC_CIFF 0x3805U +#define PTP_OFC_Undefined_0x3806 0x3806U +#define PTP_OFC_GIF 0x3807U +#define PTP_OFC_JFIF 0x3808U +#define PTP_OFC_PCD 0x3809U +#define PTP_OFC_PICT 0x380AU +#define PTP_OFC_PNG 0x380BU +#define PTP_OFC_Undefined_0x380C 0x380CU +#define PTP_OFC_TIFF 0x380DU +#define PTP_OFC_TIFF_IT 0x380EU +#define PTP_OFC_JP2 0x380FU +#define PTP_OFC_JPX 0x3810U +/* ptp v1.1 has only DNG new */ +#define PTP_OFC_DNG 0x3811U + +/* MTP extensions */ +#define PTP_OFC_MTP_MediaCard 0xb211U +#define PTP_OFC_MTP_MediaCardGroup 0xb212U +#define PTP_OFC_MTP_Encounter 0xb213U +#define PTP_OFC_MTP_EncounterBox 0xb214U +#define PTP_OFC_MTP_M4A 0xb215U +#define PTP_OFC_MTP_ZUNEUNDEFINED 0xb217U/* Unknown file type */ +#define PTP_OFC_MTP_Firmware 0xb802U +#define PTP_OFC_MTP_WindowsImageFormat 0xb881U +#define PTP_OFC_MTP_UndefinedAudio 0xb900U +#define PTP_OFC_MTP_WMA 0xb901U +#define PTP_OFC_MTP_OGG 0xb902U +#define PTP_OFC_MTP_AAC 0xb903U +#define PTP_OFC_MTP_AudibleCod 0xb904U +#define PTP_OFC_MTP_FLAC 0xb906U +#define PTP_OFC_MTP_SamsungPlaylist 0xb909U +#define PTP_OFC_MTP_UndefinedVideo 0xb980U +#define PTP_OFC_MTP_WMV 0xb981U +#define PTP_OFC_MTP_MP4 0xb982U +#define PTP_OFC_MTP_MP2 0xb983U +#define PTP_OFC_MTP_3GP 0xb984U +#define PTP_OFC_MTP_UndefinedCollection 0xba00U +#define PTP_OFC_MTP_AbstractMultimediaAlbum 0xba01U +#define PTP_OFC_MTP_AbstractImageAlbum 0xba02U +#define PTP_OFC_MTP_AbstractAudioAlbum 0xba03U +#define PTP_OFC_MTP_AbstractVideoAlbum 0xba04U +#define PTP_OFC_MTP_AbstractAudioVideoPlaylist 0xba05U +#define PTP_OFC_MTP_AbstractContactGroup 0xba06U +#define PTP_OFC_MTP_AbstractMessageFolder 0xba07U +#define PTP_OFC_MTP_AbstractChapteredProduction 0xba08U +#define PTP_OFC_MTP_AbstractAudioPlaylist 0xba09U +#define PTP_OFC_MTP_AbstractVideoPlaylist 0xba0aU +#define PTP_OFC_MTP_AbstractMediacast 0xba0bU +#define PTP_OFC_MTP_WPLPlaylist 0xba10U +#define PTP_OFC_MTP_M3UPlaylist 0xba11U +#define PTP_OFC_MTP_MPLPlaylist 0xba12U +#define PTP_OFC_MTP_ASXPlaylist 0xba13U +#define PTP_OFC_MTP_PLSPlaylist 0xba14U +#define PTP_OFC_MTP_UndefinedDocument 0xba80U +#define PTP_OFC_MTP_AbstractDocument 0xba81U +#define PTP_OFC_MTP_XMLDocument 0xba82U +#define PTP_OFC_MTP_MSWordDocument 0xba83U +#define PTP_OFC_MTP_MHTCompiledHTMLDocument 0xba84U +#define PTP_OFC_MTP_MSExcelSpreadsheetXLS 0xba85U +#define PTP_OFC_MTP_MSPowerpointPresentationPPT 0xba86U +#define PTP_OFC_MTP_UndefinedMessage 0xbb00U +#define PTP_OFC_MTP_AbstractMessage 0xbb01U +#define PTP_OFC_MTP_UndefinedContact 0xbb80U +#define PTP_OFC_MTP_AbstractContact 0xbb81U +#define PTP_OFC_MTP_vCard2 0xbb82U +#define PTP_OFC_MTP_vCard3 0xbb83U +#define PTP_OFC_MTP_UndefinedCalendarItem 0xbe00U +#define PTP_OFC_MTP_AbstractCalendarItem 0xbe01U +#define PTP_OFC_MTP_vCalendar1 0xbe02U +#define PTP_OFC_MTP_vCalendar2 0xbe03U +#define PTP_OFC_MTP_UndefinedWindowsExecutable 0xbe80U +#define PTP_OFC_MTP_MediaCast 0xbe81U +#define PTP_OFC_MTP_Section 0xbe82U + +/* MTP specific Object Properties */ +#define PTP_OPC_StorageID 0xDC01U +#define PTP_OPC_ObjectFormat 0xDC02U +#define PTP_OPC_ProtectionStatus 0xDC03U +#define PTP_OPC_ObjectSize 0xDC04U +#define PTP_OPC_AssociationType 0xDC05U +#define PTP_OPC_AssociationDesc 0xDC06U +#define PTP_OPC_ObjectFileName 0xDC07U +#define PTP_OPC_DateCreated 0xDC08U +#define PTP_OPC_DateModified 0xDC09U +#define PTP_OPC_Keywords 0xDC0AU +#define PTP_OPC_ParentObject 0xDC0BU +#define PTP_OPC_AllowedFolderContents 0xDC0CU +#define PTP_OPC_Hidden 0xDC0DU +#define PTP_OPC_SystemObject 0xDC0EU +#define PTP_OPC_PersistantUniqueObjectIdentifier 0xDC41U +#define PTP_OPC_SyncID 0xDC42U +#define PTP_OPC_PropertyBag 0xDC43U +#define PTP_OPC_Name 0xDC44U +#define PTP_OPC_CreatedBy 0xDC45U +#define PTP_OPC_Artist 0xDC46U +#define PTP_OPC_DateAuthored 0xDC47U +#define PTP_OPC_Description 0xDC48U +#define PTP_OPC_URLReference 0xDC49U +#define PTP_OPC_LanguageLocale 0xDC4AU +#define PTP_OPC_CopyrightInformation 0xDC4BU +#define PTP_OPC_Source 0xDC4CU +#define PTP_OPC_OriginLocation 0xDC4DU +#define PTP_OPC_DateAdded 0xDC4EU +#define PTP_OPC_NonConsumable 0xDC4FU +#define PTP_OPC_CorruptOrUnplayable 0xDC50U +#define PTP_OPC_ProducerSerialNumber 0xDC51U +#define PTP_OPC_RepresentativeSampleFormat 0xDC81U +#define PTP_OPC_RepresentativeSampleSize 0xDC82U +#define PTP_OPC_RepresentativeSampleHeight 0xDC83U +#define PTP_OPC_RepresentativeSampleWidth 0xDC84U +#define PTP_OPC_RepresentativeSampleDuration 0xDC85U +#define PTP_OPC_RepresentativeSampleData 0xDC86U +#define PTP_OPC_Width 0xDC87U +#define PTP_OPC_Height 0xDC88U +#define PTP_OPC_Duration 0xDC89U +#define PTP_OPC_Rating 0xDC8AU +#define PTP_OPC_Track 0xDC8BU +#define PTP_OPC_Genre 0xDC8CU +#define PTP_OPC_Credits 0xDC8DU +#define PTP_OPC_Lyrics 0xDC8EU +#define PTP_OPC_SubscriptionContentID 0xDC8FU +#define PTP_OPC_ProducedBy 0xDC90U +#define PTP_OPC_UseCount 0xDC91U +#define PTP_OPC_SkipCount 0xDC92U +#define PTP_OPC_LastAccessed 0xDC93U +#define PTP_OPC_ParentalRating 0xDC94U +#define PTP_OPC_MetaGenre 0xDC95U +#define PTP_OPC_Composer 0xDC96U +#define PTP_OPC_EffectiveRating 0xDC97U +#define PTP_OPC_Subtitle 0xDC98U +#define PTP_OPC_OriginalReleaseDate 0xDC99U +#define PTP_OPC_AlbumName 0xDC9AU +#define PTP_OPC_AlbumArtist 0xDC9BU +#define PTP_OPC_Mood 0xDC9CU +#define PTP_OPC_DRMStatus 0xDC9DU +#define PTP_OPC_SubDescription 0xDC9EU +#define PTP_OPC_IsCropped 0xDCD1U +#define PTP_OPC_IsColorCorrected 0xDCD2U +#define PTP_OPC_ImageBitDepth 0xDCD3U +#define PTP_OPC_Fnumber 0xDCD4U +#define PTP_OPC_ExposureTime 0xDCD5U +#define PTP_OPC_ExposureIndex 0xDCD6U +#define PTP_OPC_DisplayName 0xDCE0U +#define PTP_OPC_BodyText 0xDCE1U +#define PTP_OPC_Subject 0xDCE2U +#define PTP_OPC_Priority 0xDCE3U +#define PTP_OPC_GivenName 0xDD00U +#define PTP_OPC_MiddleNames 0xDD01U +#define PTP_OPC_FamilyName 0xDD02U +#define PTP_OPC_Prefix 0xDD03U +#define PTP_OPC_Suffix 0xDD04U +#define PTP_OPC_PhoneticGivenName 0xDD05U +#define PTP_OPC_PhoneticFamilyName 0xDD06U +#define PTP_OPC_EmailPrimary 0xDD07U +#define PTP_OPC_EmailPersonal1 0xDD08U +#define PTP_OPC_EmailPersonal2 0xDD09U +#define PTP_OPC_EmailBusiness1 0xDD0AU +#define PTP_OPC_EmailBusiness2 0xDD0BU +#define PTP_OPC_EmailOthers 0xDD0CU +#define PTP_OPC_PhoneNumberPrimary 0xDD0DU +#define PTP_OPC_PhoneNumberPersonal 0xDD0EU +#define PTP_OPC_PhoneNumberPersonal2 0xDD0FU +#define PTP_OPC_PhoneNumberBusiness 0xDD10U +#define PTP_OPC_PhoneNumberBusiness2 0xDD11U +#define PTP_OPC_PhoneNumberMobile 0xDD12U +#define PTP_OPC_PhoneNumberMobile2 0xDD13U +#define PTP_OPC_FaxNumberPrimary 0xDD14U +#define PTP_OPC_FaxNumberPersonal 0xDD15U +#define PTP_OPC_FaxNumberBusiness 0xDD16U +#define PTP_OPC_PagerNumber 0xDD17U +#define PTP_OPC_PhoneNumberOthers 0xDD18U +#define PTP_OPC_PrimaryWebAddress 0xDD19U +#define PTP_OPC_PersonalWebAddress 0xDD1AU +#define PTP_OPC_BusinessWebAddress 0xDD1BU +#define PTP_OPC_InstantMessengerAddress 0xDD1CU +#define PTP_OPC_InstantMessengerAddress2 0xDD1DU +#define PTP_OPC_InstantMessengerAddress3 0xDD1EU +#define PTP_OPC_PostalAddressPersonalFull 0xDD1FU +#define PTP_OPC_PostalAddressPersonalFullLine1 0xDD20U +#define PTP_OPC_PostalAddressPersonalFullLine2 0xDD21U +#define PTP_OPC_PostalAddressPersonalFullCity 0xDD22U +#define PTP_OPC_PostalAddressPersonalFullRegion 0xDD23U +#define PTP_OPC_PostalAddressPersonalFullPostalCode 0xDD24U +#define PTP_OPC_PostalAddressPersonalFullCountry 0xDD25U +#define PTP_OPC_PostalAddressBusinessFull 0xDD26U +#define PTP_OPC_PostalAddressBusinessLine1 0xDD27U +#define PTP_OPC_PostalAddressBusinessLine2 0xDD28U +#define PTP_OPC_PostalAddressBusinessCity 0xDD29U +#define PTP_OPC_PostalAddressBusinessRegion 0xDD2AU +#define PTP_OPC_PostalAddressBusinessPostalCode 0xDD2BU +#define PTP_OPC_PostalAddressBusinessCountry 0xDD2CU +#define PTP_OPC_PostalAddressOtherFull 0xDD2DU +#define PTP_OPC_PostalAddressOtherLine1 0xDD2EU +#define PTP_OPC_PostalAddressOtherLine2 0xDD2FU +#define PTP_OPC_PostalAddressOtherCity 0xDD30U +#define PTP_OPC_PostalAddressOtherRegion 0xDD31U +#define PTP_OPC_PostalAddressOtherPostalCode 0xDD32U +#define PTP_OPC_PostalAddressOtherCountry 0xDD33U +#define PTP_OPC_OrganizationName 0xDD34U +#define PTP_OPC_PhoneticOrganizationName 0xDD35U +#define PTP_OPC_Role 0xDD36U +#define PTP_OPC_Birthdate 0xDD37U +#define PTP_OPC_MessageTo 0xDD40U +#define PTP_OPC_MessageCC 0xDD41U +#define PTP_OPC_MessageBCC 0xDD42U +#define PTP_OPC_MessageRead 0xDD43U +#define PTP_OPC_MessageReceivedTime 0xDD44U +#define PTP_OPC_MessageSender 0xDD45U +#define PTP_OPC_ActivityBeginTime 0xDD50U +#define PTP_OPC_ActivityEndTime 0xDD51U +#define PTP_OPC_ActivityLocation 0xDD52U +#define PTP_OPC_ActivityRequiredAttendees 0xDD54U +#define PTP_OPC_ActivityOptionalAttendees 0xDD55U +#define PTP_OPC_ActivityResources 0xDD56U +#define PTP_OPC_ActivityAccepted 0xDD57U +#define PTP_OPC_Owner 0xDD5DU +#define PTP_OPC_Editor 0xDD5EU +#define PTP_OPC_Webmaster 0xDD5FU +#define PTP_OPC_URLSource 0xDD60U +#define PTP_OPC_URLDestination 0xDD61U +#define PTP_OPC_TimeBookmark 0xDD62U +#define PTP_OPC_ObjectBookmark 0xDD63U +#define PTP_OPC_ByteBookmark 0xDD64U +#define PTP_OPC_LastBuildDate 0xDD70U +#define PTP_OPC_TimetoLive 0xDD71U +#define PTP_OPC_MediaGUID 0xDD72U +#define PTP_OPC_TotalBitRate 0xDE91U +#define PTP_OPC_BitRateType 0xDE92U +#define PTP_OPC_SampleRate 0xDE93U +#define PTP_OPC_NumberOfChannels 0xDE94U +#define PTP_OPC_AudioBitDepth 0xDE95U +#define PTP_OPC_ScanDepth 0xDE97U +#define PTP_OPC_AudioWAVECodec 0xDE99U +#define PTP_OPC_AudioBitRate 0xDE9AU +#define PTP_OPC_VideoFourCCCodec 0xDE9BU +#define PTP_OPC_VideoBitRate 0xDE9CU +#define PTP_OPC_FramesPerThousandSeconds 0xDE9DU +#define PTP_OPC_KeyFrameDistance 0xDE9EU +#define PTP_OPC_BufferSize 0xDE9FU +#define PTP_OPC_EncodingQuality 0xDEA0U +#define PTP_OPC_EncodingProfile 0xDEA1U +#define PTP_OPC_BuyFlag 0xD901U + +/* WiFi Provisioning MTP Extension property codes */ +#define PTP_OPC_WirelessConfigurationFile 0xB104U + + +/* PTP Association Types */ +#define PTP_AT_Undefined 0x0000U +#define PTP_AT_GenericFolder 0x0001U +#define PTP_AT_Album 0x0002U +#define PTP_AT_TimeSequence 0x0003U +#define PTP_AT_HorizontalPanoramic 0x0004U +#define PTP_AT_VerticalPanoramic 0x0005U +#define PTP_AT_2DPanoramic 0x0006U +#define PTP_AT_AncillaryData 0x0007U + + +#define PTP_MAX_HANDLER_NBR 0x255U + +typedef struct { + uint32_t n; + uint32_t Handler[PTP_MAX_HANDLER_NBR]; +} PTP_ObjectHandles_t; + + +#define PTP_oi_StorageID 0U +#define PTP_oi_ObjectFormat 4U +#define PTP_oi_ProtectionStatus 6U +#define PTP_oi_ObjectCompressedSize 8U +#define PTP_oi_ThumbFormat 12U +#define PTP_oi_ThumbCompressedSize 14U +#define PTP_oi_ThumbPixWidth 18U +#define PTP_oi_ThumbPixHeight 22U +#define PTP_oi_ImagePixWidth 26U +#define PTP_oi_ImagePixHeight 30U +#define PTP_oi_ImageBitDepth 34U +#define PTP_oi_ParentObject 38U +#define PTP_oi_AssociationType 42U +#define PTP_oi_AssociationDesc 44U +#define PTP_oi_SequenceNumber 48U +#define PTP_oi_filenamelen 52U +#define PTP_oi_Filename 53U + +typedef struct { + uint32_t StorageID; + uint16_t ObjectFormat; + uint16_t ProtectionStatus; + /* In the regular objectinfo this is 32bit, but we keep the general object size here + that also arrives via other methods and so use 64bit */ + uint64_t ObjectCompressedSize; + uint16_t ThumbFormat; + uint32_t ThumbCompressedSize; + uint32_t ThumbPixWidth; + uint32_t ThumbPixHeight; + uint32_t ImagePixWidth; + uint32_t ImagePixHeight; + uint32_t ImageBitDepth; + uint32_t ParentObject; + uint16_t AssociationType; + uint32_t AssociationDesc; + uint32_t SequenceNumber; + uint8_t Filename[PTP_MAX_STR_SIZE]; + uint32_t CaptureDate; + uint32_t ModificationDate; + uint8_t Keywords[PTP_MAX_STR_SIZE]; +} PTP_ObjectInfo_t; + + +/* Object Property Describing Dataset (DevicePropDesc) */ +typedef union _PTP_PropertyValue_t { + char str[PTP_MAX_STR_SIZE]; + uint8_t u8; + int8_t i8; + uint16_t u16; + int16_t i16; + uint32_t u32; + int32_t i32; + uint64_t u64; + int64_t i64; + struct array + { + uint32_t count; + union _PTP_PropertyValue_t *v; + } a; +} PTP_PropertyValue_t; + +typedef struct { + PTP_PropertyValue_t MinimumValue; + PTP_PropertyValue_t MaximumValue; + PTP_PropertyValue_t StepSize; +} PTP_PropDescRangeForm_t; + +/* Property Describing Dataset, Enum Form */ +typedef struct { + uint16_t NumberOfValues; + PTP_PropertyValue_t SupportedValue[PTP_SUPPORTED_PROPRIETIES_NBR]; +} PTP_PropDescEnumForm_t; + + +/* (MTP) Object Property pack/unpack */ +#define PTP_opd_ObjectPropertyCode 0U +#define PTP_opd_DataType 2U +#define PTP_opd_GetSet 4U +#define PTP_opd_FactoryDefaultValue 5U + +typedef struct { + uint16_t ObjectPropertyCode; + uint16_t DataType; + uint8_t GetSet; + PTP_PropertyValue_t FactoryDefaultValue; + uint32_t GroupCode; + uint8_t FormFlag; + union + { + PTP_PropDescEnumForm_t Enum; + PTP_PropDescRangeForm_t Range; + } FORM; +} PTP_ObjectPropDesc_t; + + +/* Metadata lists for MTP operations */ +typedef struct { + uint16_t property; + uint16_t datatype; + uint32_t ObjectHandle; + PTP_PropertyValue_t propval; +} MTP_Properties_t; + + +/* Device Property Form Flag */ +#define PTP_DPFF_None 0x00U +#define PTP_DPFF_Range 0x01U +#define PTP_DPFF_Enumeration 0x02U + +/* Object Property Codes used by MTP (first 3 are same as DPFF codes) */ +#define PTP_OPFF_None 0x00U +#define PTP_OPFF_Range 0x01U +#define PTP_OPFF_Enumeration 0x02U +#define PTP_OPFF_DateTime 0x03U +#define PTP_OPFF_FixedLengthArray 0x04U +#define PTP_OPFF_RegularExpression 0x05U +#define PTP_OPFF_ByteArray 0x06U +#define PTP_OPFF_LongString 0xFFU + + +/* Device Property pack/unpack */ +#define PTP_dpd_DevicePropertyCode 0U +#define PTP_dpd_DataType 2U +#define PTP_dpd_GetSet 4U +#define PTP_dpd_FactoryDefaultValue 5U + +/* Device Property Describing Dataset (DevicePropDesc) */ +typedef struct +{ + uint16_t DevicePropertyCode; + uint16_t DataType; + uint8_t GetSet; + PTP_PropertyValue_t FactoryDefaultValue; + PTP_PropertyValue_t CurrentValue; + uint8_t FormFlag; + union + { + PTP_PropDescEnumForm_t Enum; + PTP_PropDescRangeForm_t Range; + } FORM; +} PTP_DevicePropDesc_t; + + +/* DataType Codes */ +#define PTP_DTC_UNDEF 0x0000U +#define PTP_DTC_INT8 0x0001U +#define PTP_DTC_UINT8 0x0002U +#define PTP_DTC_INT16 0x0003U +#define PTP_DTC_UINT16 0x0004U +#define PTP_DTC_INT32 0x0005U +#define PTP_DTC_UINT32 0x0006U +#define PTP_DTC_INT64 0x0007U +#define PTP_DTC_UINT64 0x0008U +#define PTP_DTC_INT128 0x0009U +#define PTP_DTC_UINT128 0x000AU + +#define PTP_DTC_ARRAY_MASK 0x4000U + +#define PTP_DTC_AINT8 (PTP_DTC_ARRAY_MASK | PTP_DTC_INT8) +#define PTP_DTC_AUINT8 (PTP_DTC_ARRAY_MASK | PTP_DTC_UINT8) +#define PTP_DTC_AINT16 (PTP_DTC_ARRAY_MASK | PTP_DTC_INT16) +#define PTP_DTC_AUINT16 (PTP_DTC_ARRAY_MASK | PTP_DTC_UINT16) +#define PTP_DTC_AINT32 (PTP_DTC_ARRAY_MASK | PTP_DTC_INT32) +#define PTP_DTC_AUINT32 (PTP_DTC_ARRAY_MASK | PTP_DTC_UINT32) +#define PTP_DTC_AINT64 (PTP_DTC_ARRAY_MASK | PTP_DTC_INT64) +#define PTP_DTC_AUINT64 (PTP_DTC_ARRAY_MASK | PTP_DTC_UINT64) +#define PTP_DTC_AINT128 (PTP_DTC_ARRAY_MASK | PTP_DTC_INT128) +#define PTP_DTC_AUINT128 (PTP_DTC_ARRAY_MASK | PTP_DTC_UINT128) + +#define PTP_DTC_STR 0xFFFFU + + +/* PTP Event Codes */ +#define PTP_EC_Undefined 0x4000U +#define PTP_EC_CancelTransaction 0x4001U +#define PTP_EC_ObjectAdded 0x4002U +#define PTP_EC_ObjectRemoved 0x4003U +#define PTP_EC_StoreAdded 0x4004U +#define PTP_EC_StoreRemoved 0x4005U +#define PTP_EC_DevicePropChanged 0x4006U +#define PTP_EC_ObjectInfoChanged 0x4007U +#define PTP_EC_DeviceInfoChanged 0x4008U +#define PTP_EC_RequestObjectTransfer 0x4009U +#define PTP_EC_StoreFull 0x400AU +#define PTP_EC_DeviceReset 0x400BU +#define PTP_EC_StorageInfoChanged 0x400CU +#define PTP_EC_CaptureComplete 0x400DU +#define PTP_EC_UnreportedStatus 0x400EU + + +void PTP_GetDevicePropValue(USBH_Info_t *phost, uint32_t *offset, uint32_t total, PTP_PropertyValue_t *value, uint16_t datatype); + +void PTP_GetString(uint8_t *str, uint8_t *data, uint16_t *len); + +uint32_t PTP_GetArray16(uint16_t *array, uint8_t *data, uint32_t offset); +uint32_t PTP_GetArray32(uint32_t *array, uint8_t *data, uint32_t offset); + +void PTP_DecodeDeviceInfo(USBH_Info_t *phost, PTP_DeviceInfo_t *dev_info); + +void PTP_DecodeStorageInfo(USBH_Info_t *phost, PTP_StorageInfo_t *storage_info); + +void PTP_DecodeObjectInfo(USBH_Info_t *phost, PTP_ObjectInfo_t *object_info); + +void PTP_DecodeObjectPropDesc(USBH_Info_t *phost, PTP_ObjectPropDesc_t *opd, uint32_t opdlen); + +uint32_t PTP_DecodeObjectPropList(USBH_Info_t *phost, MTP_Properties_t *props, uint32_t len); + + +#define PTP_LE16(addr) *((uint16_t *)(addr)) +#define PTP_LE32(addr) *((uint32_t *)(addr)) +#define PTP_LE64(addr) *((uint64_t *)(addr)) + + +#endif // __USBH_MTP_PTP_H__ diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_core.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_core.c new file mode 100644 index 0000000000..3dcfdd234e --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_core.c @@ -0,0 +1,664 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_core.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <stdlib.h> +#include <string.h> +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_stdreq.h" + + +USBH_Info_t USBH_Info; + + +/****************************************************************************************************************************************** +* 函数名称: USBH_Init() +* 功能说明: USB Host 初始化 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_Init(USBH_Class_cb_t *class_cb, USBH_User_cb_t *usr_cb) +{ + USBH_HW_Init(); + + USBH_DeInit(); + + /* Register class and user callbacks */ + USBH_Info.class_cb = class_cb; + USBH_Info.usr_cb = usr_cb; + + /* Upon Init call usr call back */ + if(USBH_Info.usr_cb->Init) + USBH_Info.usr_cb->Init(); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_DeInit() +* 功能说明: USB Host Re-Initialize +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_DeInit(void) +{ + USBH->PORTSR = USBH_PORTSR_CONNCHG_Msk | // 清零标志位 + USBH_PORTSR_RSTCHG_Msk | + USBH_PORTSR_ENACHG_Msk; + + USBH_Info.State = HOST_IDLE; + USBH_Info.EnumState = ENUM_GET_DEV_DESC; + + USBH_Info.Ctrl.pksz = 8; + + USBH_Info.Ctrl.toggle_in = 0; + USBH_Info.Ctrl.toggle_out = 0; + + USBH_Info.Ctrl.state = CTRL_IDLE; + + USBH_Info.Device.Address = 0; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_Process() +* 功能说明: USB Host core main state machine process +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_Process(void) +{ + static uint32_t frameNbr; + USBH_Status status = USBH_FAIL; + + if(USBH_Info.State != HOST_IDLE) + { + if(!USBH_IsDeviceConnected()) + USBH_Info.State = HOST_DEV_DETACHED; + } + + switch(USBH_Info.State) + { + case HOST_IDLE: + if(USBH_IsDeviceConnected()) + { + USBH_Info.State = HOST_DEV_ATTACHED; + + if(USBH_Info.usr_cb->DeviceAttached) + USBH_Info.usr_cb->DeviceAttached(); + + frameNbr = USBH->FRAMENR; + } + break; + + case HOST_DEV_ATTACHED: + if(abs((int)frameNbr - (int)USBH->FRAMENR) > 100) + { + USBH_Info.State = HOST_PORT_RESETED; + + USBH_ResetPort(); + } + break; + + case HOST_PORT_RESETED: + if(USBH_IsPortEnabled()) + { + USBH_Info.State = HOST_PORT_ENABLED; + + frameNbr = USBH->FRAMENR; + } + break; + + case HOST_PORT_ENABLED: + if(abs((int)frameNbr - (int)USBH->FRAMENR) > 10) + { + USBH_Info.State = HOST_ENUMERATION; + + USBH_Info.Device.Speed = USBH_GetDeviceSpeed(); + + if(USBH_Info.usr_cb->DeviceSpeedDetected) + USBH_Info.usr_cb->DeviceSpeedDetected(USBH_Info.Device.Speed); + } + break; + + case HOST_ENUMERATION: + if(USBH_HandleEnum(&USBH_Info) == USBH_OK) + { + USBH_Info.State = HOST_USR_INPUT; + + if(USBH_Info.usr_cb->EnumerationDone) + USBH_Info.usr_cb->EnumerationDone(); + } + break; + + case HOST_USR_INPUT: + /* The function should return user response true to move to class state */ + if(USBH_Info.usr_cb->UserInput()) + { + if((USBH_Info.class_cb->Init(&USBH_Info)) == USBH_OK) + { + USBH_Info.State = HOST_CLASS_REQUEST; + } + } + break; + + case HOST_CLASS_REQUEST: + /* process class standard control requests state machine */ + status = USBH_Info.class_cb->Request(&USBH_Info); + if(status == USBH_OK) + { + USBH_Info.State = HOST_CLASS; + } + else + { + USBH_ErrorHandle(&USBH_Info, status); + } + break; + + case HOST_CLASS: + /* process class state machine */ + status = USBH_Info.class_cb->Process(&USBH_Info); + USBH_ErrorHandle(&USBH_Info, status); + break; + + case HOST_CTRL_XFER: + /* process control transfer state machine */ + USBH_HandleControl(&USBH_Info); + break; + + case HOST_DEV_DETACHED: + if(USBH_Info.usr_cb->DeviceDisconnected) + USBH_Info.usr_cb->DeviceDisconnected(); + + /* Re-Initialize Host for new Enumeration */ + USBH_DeInit(); + if(USBH_Info.usr_cb->DeInit) + USBH_Info.usr_cb->DeInit(); + USBH_Info.class_cb->DeInit(&USBH_Info); + + USBH_Info.State = HOST_IDLE; + break; + + default : + break; + } +} + + +uint8_t USBH_Cfg_Desc_Buffer[USBH_MAX_CFG_SIZE]; +uint16_t USBH_Cfg_Desc_Length; +/****************************************************************************************************************************************** +* 函数名称: USBH_HandleEnum() +* 功能说明: Handle the USB device enumeration state machine +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_HandleEnum(USBH_Info_t *phost) +{ + USBH_Status status = USBH_BUSY; + + switch(phost->EnumState) + { + case ENUM_GET_DEV_DESC: + if(USBH_GetDescriptor(phost, USB_DESC_DEVICE, 0, (uint8_t *)&phost->Device.Dev_Desc, 8) == USBH_OK) + { + phost->EnumState = ENUM_GET_FULL_DEV_DESC; + + phost->Ctrl.pksz = phost->Device.Dev_Desc.bMaxPacketSize; + } + break; + + case ENUM_GET_FULL_DEV_DESC: + if(USBH_GetDescriptor(phost, USB_DESC_DEVICE, 0, (uint8_t *)&phost->Device.Dev_Desc, sizeof(USB_DevDesc_t)) == USBH_OK) + { + phost->EnumState = ENUM_SET_ADDR; + + if(phost->usr_cb->DeviceDescAvailable) + phost->usr_cb->DeviceDescAvailable(&phost->Device.Dev_Desc); + } + break; + + case ENUM_SET_ADDR: + if(USBH_SetAddress(phost, USBH_DEVICE_ADDRESS) == USBH_OK) + { + phost->EnumState = ENUM_GET_CFG_DESC; + + phost->Device.Address = USBH_DEVICE_ADDRESS; + + if(phost->usr_cb->DeviceAddressAssigned) + phost->usr_cb->DeviceAddressAssigned(); + } + break; + + case ENUM_GET_CFG_DESC: + if(USBH_GetDescriptor(phost, USB_DESC_CONFIG, 0, (uint8_t *)&phost->Device.Cfg_Desc, sizeof(USB_CfgDesc_t)) == USBH_OK) + { + if(phost->Device.Cfg_Desc.wTotalLength <= USBH_MAX_CFG_SIZE) + { + phost->EnumState = ENUM_GET_FULL_CFG_DESC; + } + else + { + status = USBH_NOT_SUPPORTED; + } + } + break; + + case ENUM_GET_FULL_CFG_DESC: + if(USBH_GetDescriptor(phost, USB_DESC_CONFIG, 0, USBH_Cfg_Desc_Buffer, phost->Device.Cfg_Desc.wTotalLength) == USBH_OK) + { + phost->EnumState = ENUM_GET_VENDOR_STRING_DESC; + + USBH_Cfg_Desc_Length = phost->Device.Cfg_Desc.wTotalLength; + USBH_ParseCfgDesc(phost, USBH_Cfg_Desc_Buffer, USBH_Cfg_Desc_Length); + + if(phost->usr_cb->ConfigDescAvailable) + phost->usr_cb->ConfigDescAvailable(&phost->Device.Cfg_Desc, phost->Device.Intf_Desc, phost->Device.Ep_Desc[0]); + } + break; + + case ENUM_GET_VENDOR_STRING_DESC: + if(phost->Device.Dev_Desc.iManufacturer != 0) + { + USBH_Status stat = USBH_GetDescriptor(phost, USB_DESC_STRING, phost->Device.Dev_Desc.iManufacturer, (uint8_t *)phost->Device.strVender, sizeof(phost->Device.strVender)); + if(stat == USBH_OK) + { + phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC; + + if(phost->usr_cb->VendorString) + phost->usr_cb->VendorString(phost->Device.strVender); + } + else if(stat == USBH_NOT_SUPPORTED) + { + phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC; + } + } + else + { + phost->EnumState = ENUM_GET_PRODUCT_STRING_DESC; + } + break; + + case ENUM_GET_PRODUCT_STRING_DESC: + if(phost->Device.Dev_Desc.iProduct != 0) + { + USBH_Status stat = USBH_GetDescriptor(phost, USB_DESC_STRING, phost->Device.Dev_Desc.iProduct, (uint8_t *)phost->Device.strProduct, sizeof(phost->Device.strProduct)); + if(stat == USBH_OK) + { + phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC; + + if(phost->usr_cb->ProductString) + phost->usr_cb->ProductString(phost->Device.strProduct); + } + else if(stat == USBH_NOT_SUPPORTED) + { + phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC; + } + } + else + { + phost->EnumState = ENUM_GET_SERIALNUM_STRING_DESC; + } + break; + + case ENUM_GET_SERIALNUM_STRING_DESC: + if(phost->Device.Dev_Desc.iSerialNumber != 0) + { + USBH_Status stat = USBH_GetDescriptor(phost, USB_DESC_STRING, phost->Device.Dev_Desc.iSerialNumber, (uint8_t *)phost->Device.strSerialNumber, sizeof(phost->Device.strSerialNumber)); + if(stat == USBH_OK) + { + phost->EnumState = ENUM_SET_CONFIGURATION; + + if(phost->usr_cb->SerialNumString) + phost->usr_cb->SerialNumString(phost->Device.strSerialNumber); + } + else if(stat == USBH_NOT_SUPPORTED) + { + phost->EnumState = ENUM_SET_CONFIGURATION; + } + } + else + { + phost->EnumState = ENUM_SET_CONFIGURATION; + } + break; + + case ENUM_SET_CONFIGURATION: + if(USBH_SetConfiguration(phost, phost->Device.Cfg_Desc.bConfigurationValue) == USBH_OK) + { + phost->EnumState = ENUM_DEV_CONFIGURED; + } + break; + + case ENUM_DEV_CONFIGURED: + status = USBH_OK; + break; + + default: + break; + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_HandleControl() +* 功能说明: Handle the USB control transfer state machine +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_HandleControl(USBH_Info_t *phost) +{ + static uint32_t size; + uint32_t real_size; + USBH_Resp resp; + + switch(phost->Ctrl.state) + { + case CTRL_SETUP: + if(USBH_SendSetupPacket(phost->Device.Address, (uint8_t *)&phost->Ctrl.setup, 8)) + { + phost->Ctrl.state = CTRL_SETUP_WAIT; + } + break; + + case CTRL_SETUP_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + phost->Ctrl.toggle_in = 1; + phost->Ctrl.toggle_out = 1; + + if(phost->Ctrl.setup.wLength != 0) + { + if(phost->Ctrl.setup.bRequestType & USB_EP_IN) + { + phost->Ctrl.state = CTRL_DATA_IN; + } + else + { + phost->Ctrl.state = CTRL_DATA_OUT; + } + } + else // No Data Stage + { + if(phost->Ctrl.setup.bRequestType & USB_EP_IN) + { + phost->Ctrl.state = CTRL_STATUS_OUT; + } + else + { + phost->Ctrl.state = CTRL_STATUS_IN; + } + } + } + else if(resp == USBR_ERROR) + { + phost->Ctrl.state = CTRL_SETUP; // retry + } + break; + + case CTRL_DATA_IN: + size = (phost->Ctrl.size > phost->Ctrl.pksz) ? phost->Ctrl.pksz : phost->Ctrl.size; + if(USBH_SendInPacket(phost->Device.Address, 0, phost->Ctrl.toggle_in, size)) + { + phost->Ctrl.state = CTRL_DATA_IN_WAIT; + } + break; + + case CTRL_DATA_IN_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + phost->Ctrl.toggle_in ^= 1; + + real_size = USBH_ReadRxBuffer(phost->Ctrl.buff, size); + if(real_size < size) + { + phost->Ctrl.state = CTRL_STATUS_OUT; + } + else + { + phost->Ctrl.size -= size; + phost->Ctrl.buff += size; + + if(phost->Ctrl.size) + { + phost->Ctrl.state = CTRL_DATA_IN; + } + else + { + phost->Ctrl.state = CTRL_STATUS_OUT; + } + } + } + else if(resp == USBR_NAK) + { + phost->Ctrl.state = CTRL_DATA_IN; // retry + } + else if(resp == USBR_STALL) + { + phost->Ctrl.state = CTRL_STALLED; + phost->State = phost->StateBkp; + } + else if(resp == USBR_ERROR) + { + phost->Ctrl.state = CTRL_ERROR; + phost->State = phost->StateBkp; + } + break; + + case CTRL_DATA_OUT: + size = (phost->Ctrl.size > phost->Ctrl.pksz) ? phost->Ctrl.pksz : phost->Ctrl.size; + if(USBH_SendOutPacket(phost->Device.Address, 0, phost->Ctrl.toggle_out, phost->Ctrl.buff, size)) + { + phost->Ctrl.state = CTRL_DATA_OUT_WAIT; + } + break; + + case CTRL_DATA_OUT_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + phost->Ctrl.toggle_out ^= 1; + + phost->Ctrl.size -= size; + phost->Ctrl.buff += size; + + if(phost->Ctrl.size) + { + phost->Ctrl.state = CTRL_DATA_OUT; + } + else + { + phost->Ctrl.state = CTRL_STATUS_IN; + } + } + else if(resp == USBR_NAK) + { + phost->Ctrl.state = CTRL_DATA_OUT; // retry + } + else if(resp == USBR_STALL) + { + phost->Ctrl.state = CTRL_STALLED; + phost->State = phost->StateBkp; + } + else if(resp == USBR_ERROR) + { + phost->Ctrl.state = CTRL_ERROR; + phost->State = phost->StateBkp; + } + break; + + case CTRL_STATUS_IN: + if(USBH_SendInPacket(phost->Device.Address, 0, phost->Ctrl.toggle_in, 0)) + { + phost->Ctrl.state = CTRL_STATUS_IN_WAIT; + } + break; + + case CTRL_STATUS_IN_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + phost->Ctrl.toggle_in ^= 1; + + phost->Ctrl.state = CTRL_COMPLETE; + phost->State = phost->StateBkp; + } + else if(resp == USBR_NAK) + { + phost->Ctrl.state = CTRL_STATUS_IN; // retry + } + else if(resp == USBR_STALL) + { + phost->Ctrl.state = CTRL_STALLED; + phost->State = phost->StateBkp; + } + else if(resp == USBR_ERROR) + { + phost->Ctrl.state = CTRL_ERROR; + phost->State = phost->StateBkp; + } + break; + + case CTRL_STATUS_OUT: + if(USBH_SendOutPacket(phost->Device.Address, 0, phost->Ctrl.toggle_out, 0, 0)) + { + phost->Ctrl.state = CTRL_STATUS_OUT_WAIT; + } + break; + + case CTRL_STATUS_OUT_WAIT: + resp = USBH_State(); + if(resp == USBR_ACK) + { + phost->Ctrl.toggle_out ^= 1; + + phost->Ctrl.state = CTRL_COMPLETE; + phost->State = phost->StateBkp; + } + else if(resp == USBR_NAK) + { + phost->Ctrl.state = CTRL_STATUS_OUT; // retry + } + else if(resp == USBR_STALL) + { + phost->Ctrl.state = CTRL_STALLED; + phost->State = phost->StateBkp; + } + else if(resp == USBR_ERROR) + { + phost->Ctrl.state = CTRL_ERROR; + phost->State = phost->StateBkp; + } + break; + + default: + break; + } +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_CtrlTransfer() +* 功能说明: 控制传输 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_CtrlTransfer(USBH_Info_t *phost, uint8_t *buff, uint16_t size) +{ + USBH_Status status = USBH_BUSY; + + if(phost->Ctrl.state == CTRL_IDLE) + { + phost->Ctrl.buff = buff; + phost->Ctrl.size = size; + phost->Ctrl.state = CTRL_SETUP; + + phost->StateBkp = phost->State; + phost->State = HOST_CTRL_XFER; + } + else + { + switch(phost->Ctrl.state) + { + case CTRL_COMPLETE: // Commands successfully sent and Response Received + status = USBH_OK; + phost->Ctrl.state = CTRL_IDLE; + break; + + case CTRL_STALLED: + status = USBH_NOT_SUPPORTED; + phost->Ctrl.state = CTRL_IDLE; + break; + + case CTRL_ERROR: + status = USBH_FAIL; + phost->Ctrl.state = CTRL_IDLE; + break; + + default: + break; + } + } + + return status; +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_ErrorHandle() +* 功能说明: Handles the Error on Host side. +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +void USBH_ErrorHandle(USBH_Info_t *phost, USBH_Status errType) +{ + if(errType == USBH_UNRECOVERED_ERROR) + { + if(phost->usr_cb->UnrecoveredError) + phost->usr_cb->UnrecoveredError(); + + goto restart; + } + else if(errType == USBH_APPLY_DEINIT) // USB host restart requested from application layer + { + phost->usr_cb->Init(); + + goto restart; + } + + return; + +restart: + /* Re-Initialize Host for new Enumeration */ + USBH_DeInit(); + USBH_Info.usr_cb->DeInit(); + USBH_Info.class_cb->DeInit(&USBH_Info); +} + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_core.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_core.h new file mode 100644 index 0000000000..8d9435fe17 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_core.h @@ -0,0 +1,150 @@ +#ifndef __USBH_CORE_H__ +#define __USBH_CORE_H__ + +#include <stdint.h> +#include "usbh_conf.h" + + +typedef enum { + USBH_OK = 0, + USBH_BUSY, + USBH_FAIL, + USBH_NOT_SUPPORTED, + USBH_UNRECOVERED_ERROR, + USBH_APPLY_DEINIT +} USBH_Status; + + +typedef enum { + HOST_IDLE = 0, + HOST_DEV_ATTACHED, + HOST_PORT_RESETED, + HOST_PORT_ENABLED, + HOST_ENUMERATION, + HOST_CLASS_REQUEST, + HOST_CLASS, + HOST_CTRL_XFER, + HOST_USR_INPUT, + HOST_SUSPENDED, + HOST_WAKEUP, + HOST_DEV_DETACHED, +} HOST_State; + + +typedef enum { + ENUM_GET_DEV_DESC = 0, + ENUM_GET_FULL_DEV_DESC, + ENUM_SET_ADDR, + ENUM_GET_CFG_DESC, + ENUM_GET_FULL_CFG_DESC, + ENUM_GET_VENDOR_STRING_DESC, + ENUM_GET_PRODUCT_STRING_DESC, + ENUM_GET_SERIALNUM_STRING_DESC, + ENUM_SET_CONFIGURATION, + ENUM_DEV_CONFIGURED +} ENUM_State; + + +typedef enum { + CTRL_IDLE = 0, + CTRL_SETUP, + CTRL_SETUP_WAIT, + CTRL_DATA_IN, + CTRL_DATA_IN_WAIT, + CTRL_DATA_OUT, + CTRL_DATA_OUT_WAIT, + CTRL_STATUS_IN, + CTRL_STATUS_IN_WAIT, + CTRL_STATUS_OUT, + CTRL_STATUS_OUT_WAIT, + CTRL_ERROR, + CTRL_STALLED, + CTRL_COMPLETE +} CTRL_State; + + +typedef struct { + uint8_t pksz; // 控制传输包大小 + uint8_t *buff; // 控制传输的数据阶段缓冲区 + uint16_t size; // 控制传输的数据阶段缓冲区大小 + CTRL_State state; + USB_Setup_Packet_t setup; // Setup 包 + + uint8_t toggle_in; + uint8_t toggle_out; +} USBH_CtrlXfer_t; + + +typedef struct { + uint8_t Address; + uint8_t Speed; // 2 低速 3 全速 + USB_DevDesc_t Dev_Desc; + USB_CfgDesc_t Cfg_Desc; + USB_IntfDesc_t Intf_Desc[USBH_MAX_NUM_INTERFACES]; + USB_EpDesc_t Ep_Desc[USBH_MAX_NUM_INTERFACES][USBH_MAX_NUM_ENDPOINTS]; + USB_HIDDesc_t HID_Desc[USBH_MAX_NUM_INTERFACES]; + uint8_t HIDReport_Desc[USBH_MAX_NUM_INTERFACES][USBH_HID_REPORT_SIZE]; + char strVender[USBH_MAX_STR_SIZE]; + char strProduct[USBH_MAX_STR_SIZE]; + char strSerialNumber[USBH_MAX_STR_SIZE]; +} USBH_Device_t; + +extern uint8_t USBH_Cfg_Desc_Buffer[USBH_MAX_CFG_SIZE]; +extern uint16_t USBH_Cfg_Desc_Length; + +struct USBH_Info_T; +typedef struct { + USBH_Status (*Init)(struct USBH_Info_T *phost); + void (*DeInit)(struct USBH_Info_T *phost); + USBH_Status (*Request)(struct USBH_Info_T *phost); + USBH_Status (*Process)(struct USBH_Info_T *phost); +} USBH_Class_cb_t; + + +typedef struct { + void (*Init)(void); + void (*DeInit)(void); + void (*DeviceAttached)(void); + void (*ResetDevice)(void); + void (*DeviceDisconnected)(void); + void (*OverCurrentDetected)(void); + void (*DeviceSpeedDetected)(uint8_t DeviceSpeed); + void (*DeviceDescAvailable)(USB_DevDesc_t *devDesc); + void (*DeviceAddressAssigned)(void); + void (*ConfigDescAvailable)(USB_CfgDesc_t *cfgDesc, USB_IntfDesc_t *intfDesc, USB_EpDesc_t *epDesc); + void (*VendorString)(char *); + void (*ProductString)(char *); + void (*SerialNumString)(char *); + void (*EnumerationDone)(void); + uint32_t (*UserInput)(void); + int (*UserApplication)(void); + void (*DeviceNotSupported)(void); + void (*UnrecoveredError)(void); +} USBH_User_cb_t; + + +typedef struct USBH_Info_T { + HOST_State State; // Host State Machine + HOST_State StateBkp; // State Backup + ENUM_State EnumState; // Enumeration state Machine + + USBH_CtrlXfer_t Ctrl; + USBH_Device_t Device; + + USBH_Class_cb_t *class_cb; + USBH_User_cb_t *usr_cb; +} USBH_Info_t; + + +void USBH_Init(USBH_Class_cb_t *class_cb, USBH_User_cb_t *usr_cb); +void USBH_DeInit(void); + +void USBH_Process(void); +USBH_Status USBH_HandleEnum(USBH_Info_t *phost); +void USBH_HandleControl(USBH_Info_t *phost); +USBH_Status USBH_CtrlTransfer(USBH_Info_t *phost, uint8_t *buff, uint16_t size); + +void USBH_ErrorHandle(USBH_Info_t *phost, USBH_Status errType); + +#endif + diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_stdreq.c b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_stdreq.c new file mode 100644 index 0000000000..bb8f53ffe8 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_stdreq.c @@ -0,0 +1,202 @@ +/****************************************************************************************************************************************** +* 文件名称: usbh_stdreq.c +* 功能说明: +* 技术支持: http://www.synwit.com.cn/e/tool/gbook/?bid=1 +* 注意事项: +* 版本日期: V1.1.0 2020年11月3日 +* 升级记录: +* +* +******************************************************************************************************************************************* +* @attention +* +* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION +* REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, SYNWIT SHALL NOT BE HELD LIABLE +* FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT +* OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONN- +* -ECTION WITH THEIR PRODUCTS. +* +* COPYRIGHT 2012 Synwit Technology +*******************************************************************************************************************************************/ +#include <string.h> +#include "SWM341.h" +#include "usbh_core.h" +#include "usbh_stdreq.h" + + +/****************************************************************************************************************************************** +* 函数名称: USBH_GetDescriptor() +* 功能说明: 获取描述符 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_GetDescriptor(USBH_Info_t *phost, uint8_t type, uint8_t index, uint8_t *buff, int size) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_D2H | USB_REQ_STANDARD | USB_REQ_TO_DEVICE; + phost->Ctrl.setup.bRequest = USB_GET_DESCRIPTOR; + phost->Ctrl.setup.wValue = (type << 8) | index; + phost->Ctrl.setup.wIndex = (type == USB_DESC_STRING) ? 0x0409 : 0; + phost->Ctrl.setup.wLength = size; + + return USBH_CtrlTransfer(phost, buff, size); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_GetDescriptorEx() +* 功能说明: 获取描述符 +* 输 入: uint8_t reqType USB_REQ_STANDARD、USB_REQ_CLASS、USB_REQ_VENDOR +* uint8_t reqTarget USB_REQ_TO_DEVICE、USB_REQ_TO_INTERFACE、USB_REQ_TO_ENDPOINT +* uint8_t type +* uint8_t index +* uint16_t wIndex +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_GetDescriptorEx(USBH_Info_t *phost, uint8_t reqType, uint8_t reqTarget, uint8_t type, uint8_t index, uint16_t wIndex, uint8_t *buff, int size) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_D2H | reqType | reqTarget; + phost->Ctrl.setup.bRequest = USB_GET_DESCRIPTOR; + phost->Ctrl.setup.wValue = (type << 8) | index; + phost->Ctrl.setup.wIndex = wIndex; + phost->Ctrl.setup.wLength = size; + + return USBH_CtrlTransfer(phost, buff, size); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_SetAddress() +* 功能说明: 设置设备地址 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_SetAddress(USBH_Info_t *phost, uint8_t addr) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_STANDARD | USB_REQ_TO_DEVICE; + phost->Ctrl.setup.bRequest = USB_SET_ADDRESS; + phost->Ctrl.setup.wValue = addr; + phost->Ctrl.setup.wIndex = 0; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0, 0); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_SetConfiguration() +* 功能说明: 设置 configuration +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_SetConfiguration(USBH_Info_t *phost, uint8_t cfg) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_STANDARD | USB_REQ_TO_DEVICE; + phost->Ctrl.setup.bRequest = USB_SET_CONFIGURATION; + phost->Ctrl.setup.wValue = cfg; + phost->Ctrl.setup.wIndex = 0; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0, 0); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_SetInterface() +* 功能说明: 设置 interface altSetting +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_SetInterface(USBH_Info_t *phost, uint8_t intf, uint8_t altSetting) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_STANDARD | USB_REQ_TO_INTERFACE; + phost->Ctrl.setup.bRequest = USB_SET_INTERFACE; + phost->Ctrl.setup.wValue = altSetting; + phost->Ctrl.setup.wIndex = intf; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0, 0); +} + + +/****************************************************************************************************************************************** +* 函数名称: USBH_ClrFeature() +* 功能说明: 清除端点 STALL +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_ClrFeature(USBH_Info_t *phost, uint8_t ep) +{ + phost->Ctrl.setup.bRequestType = USB_REQ_H2D | USB_REQ_STANDARD | USB_REQ_TO_ENDPOINT; + phost->Ctrl.setup.bRequest = USB_CLEAR_FEATURE; + phost->Ctrl.setup.wValue = 0x00; + phost->Ctrl.setup.wIndex = ep; + phost->Ctrl.setup.wLength = 0; + + return USBH_CtrlTransfer(phost, 0, 0); +} + +/****************************************************************************************************************************************** +* 函数名称: USBH_ParseCfgDesc() +* 功能说明: 解析配置描述符 +* 输 入: 无 +* 输 出: 无 +* 注意事项: 无 +******************************************************************************************************************************************/ +USBH_Status USBH_ParseCfgDesc(USBH_Info_t *phost, uint8_t *buff, uint16_t size) +{ + USB_DescHeader_t *pdesc = (USB_DescHeader_t *)buff; + uint8_t if_ix, ep_ix; + + memcpy(&phost->Device.Cfg_Desc, pdesc, sizeof(USB_CfgDesc_t)); + + if(phost->Device.Cfg_Desc.bNumInterfaces > USBH_MAX_NUM_INTERFACES) + { + return USBH_NOT_SUPPORTED; + } + + while((uint8_t *)pdesc < &buff[size]) + { + pdesc = (USB_DescHeader_t *)((uint8_t *)pdesc + pdesc->bLength); + switch(pdesc->bDescriptorType) + { + case USB_DESC_INTERFACE: + if_ix = ((USB_IntfDesc_t *)pdesc)->bInterfaceNumber; + if(if_ix >= USBH_MAX_NUM_INTERFACES) + { + return USBH_NOT_SUPPORTED; + } + + memcpy(&phost->Device.Intf_Desc[if_ix], pdesc, sizeof(USB_IntfDesc_t)); + + if(phost->Device.Intf_Desc[if_ix].bNumEndpoints > USBH_MAX_NUM_ENDPOINTS) + { + return USBH_NOT_SUPPORTED; + } + ep_ix = 0; + break; + + case USB_DESC_ENDPOINT: + memcpy(&phost->Device.Ep_Desc[if_ix][ep_ix], pdesc, sizeof(USB_EpDesc_t)); + if(++ep_ix >= USBH_MAX_NUM_ENDPOINTS) + { + return USBH_NOT_SUPPORTED; + } + break; + + case USB_DESC_HID: + memcpy(&phost->Device.HID_Desc[if_ix], pdesc, sizeof(USB_HIDDesc_t)); + break; + + default: + break; + } + } + + return USBH_OK ; +} diff --git a/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_stdreq.h b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_stdreq.h new file mode 100644 index 0000000000..876005a3a8 --- /dev/null +++ b/bsp/synwit/libraries/SWM341_CSL/SWM341_UsbHost_Lib/usbh_stdreq.h @@ -0,0 +1,18 @@ +#ifndef __USBH_STDREQ_H__ +#define __USBH_STDREQ_H__ + +#include <stdint.h> +#include "usbh_core.h" + + +USBH_Status USBH_GetDescriptor(USBH_Info_t *phost, uint8_t type, uint8_t index, uint8_t *buff, int size); +USBH_Status USBH_GetDescriptorEx(USBH_Info_t *phost, uint8_t reqType, uint8_t reqTarget, uint8_t type, uint8_t index, uint16_t wIndex, uint8_t *buff, int size); + +USBH_Status USBH_SetAddress(USBH_Info_t *phost, uint8_t addr); +USBH_Status USBH_SetConfiguration(USBH_Info_t *phost, uint8_t cfg); +USBH_Status USBH_SetInterface(USBH_Info_t *phost, uint8_t intf, uint8_t altSetting); +USBH_Status USBH_ClrFeature(USBH_Info_t *phost, uint8_t ep); + +USBH_Status USBH_ParseCfgDesc(USBH_Info_t *phost, uint8_t *buff, uint16_t size); + +#endif |
