| Age | Commit message (Collapse) | Author |
|---|
|
Configure TX as alternate-function push-pull and RX as pull-up input on GD32E50x/F10x/F20x/F30x. Remove the GPIO API alias that incorrectly configured both pins as general-purpose push-pull outputs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* feat(bsp/gd32): 增加GDF405RG芯片BSP
* chore(bsp/gd32): 取消git对RTE目录的跟踪，并更新README中的BSP条目
* style(bsp/gd32): 修改格式
|
|
|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
|
|
* feat(gd32): 优化GD32F470 SPI Flash初始化和UART0配置
主要修改：
1. SPI Flash初始化优化
- 添加可配置的SPI Flash自动初始化选项(BSP_USING_SPI_FLASH)
- 支持按SPI总线独立配置Flash初始化(BSP_USING_SPIx_FLASH)
- 避免SPI Flash初始化与其他SPI设备(如OLED、WIFI)冲突
- 添加SPI5 Flash支持
- 修改drv_spi_flash.c，仅在明确配置的SPI总线上初始化Flash
2. UART0配置修复
- 将UART0的AFIO默认值从AF1改为AF7
- 修复串口无响应问题
这些修改使得用户可以更灵活地配置SPI Flash初始化，避免自动初始化导致的设备冲突问题。
* feat(gd32): 解耦SPI Flash与SFUD的依赖关系
|
|
|
|
|
|
|
|
|
|
[bsp][gd32][serial_v2] 增加 GD32F5 支持
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
移除BSP软件I2C相关配置，软件I2C以集成至I2C设备驱动框架
|
|
|
|
* [bsp/gd32] add gd32h759i-eval bsp
* [fix] Update gd32h759i-start config
* 添加BSP CI看护
* Apply suggestions from code review
Co-authored-by: Copilot <[email protected]>
* Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c
Co-authored-by: Copilot <[email protected]>
* Update bsp/gd32/arm/libraries/gd32_drivers/drv_usart.c
Co-authored-by: Copilot <[email protected]>
* add .gitignore
---------
Co-authored-by: Copilot <[email protected]>
|
|
|
|
Solution: gd32_uart_gpio_init 不开中断
等驱动框架初始化好fifo后通过 device_control 开中断
Signed-off-by: Yucai Liu <[email protected]>
|
|
|
|
|
|
|
|
Co-authored-by: guozhanxin <[email protected]>
|
|
|
|
non-complementary PWM output with advanced timers] (#10426)
bsp:<bsp/gd32/arm/libraries/gd32_drivers/drv_pwm.c>
[Support for non-complementary PWM output with advanced timers]
1.当前结构体 TIMER_PORT_CHANNEL_MAP_Srt_int16_t 的成员channel为u16
为增加对非互补输出的支持 将uint16_t 改为int16_t
/* timer channel: -2 is ch_1n, -1 is ch_0n, 0 is ch0, 1 is ch1 */
2.对函数 channel_output_config 以及 drv_pwm_enable 进行修改，增加对非互补输出的支持
Signed-off-by: Yucai Liu <[email protected]>
|
|
3.删除SPI flash 在使用DFS时自动挂载逻辑
|
|
|
|
|
|
|
|
* 新增gd32470z-lckfb配套LCD驱动
* 1.使用RTT的编程规范修改注释 2.readme文件新增注意事项以及原作者信息
* Add maintainer info for gd32470z-lckfb-lcd
|
|
加超时时间、flush、获取缓冲区数据长度命令、数据溢出逻辑修复、稳定性细节优化、添加更多serial_v2测试用例
[components][serial_v2] 优化txflush逻辑、对tx的activated做中断保护
[components][at] at_client适配新版serial_v2
[components][at] at_server适配新版serial_v2
[components][serial_v2] 测试用例增加循环调用，format测试用例
[components][serial_v2] poll模式判断逻辑错误
[components][serial_v2] 测试用例去掉一些非必要延时
[components][serial_v2] 测试例程使用menuconfig进行配置，更新readme
[components][at_client] at_client_getchar返回值错误、at_client解析线程优先级错误设置
[components][at] 错误码应该返回负值
[components][serial_v2] TCFLSH和FIONREAD完善、control函数增加错误返回值
[components][serial_v2] RT_SERIAL_CTRL_GET_RX_DATA_LEN更改为RT_SERIAL_CTRL_GET_UNREAD_BYTES_COUNT
[utest][serial_v2] TC_UART_SEND_TIMES替换为RT_SERIAL_TC_SEND_ITERATIONS
[components][serial_v2] FIONREAD参数应该是无符号类型
[utest][serial_v2] 完善测试用例
[components][serial_v2] 避免使用三目运算符
[components][serial_v2] 使用clang-format格式化代码
[components][serial_v2] 添加get超时时间命令
[components][serial_v2] 完善posix接口
[components][serial_v2] 阻塞接口添加阻塞时间为0时的处理逻辑、优化RX阻塞接收逻辑
[components][serial_v2] 设置超时时间命令的参数改为指针形式
[components][serial_v2] nbuf发送添加超时时间为0时的逻辑
[components][serial_v2] 完善添加测试用例
[utest][serial_v2] 修复依赖关系
[components][serial_v2] 非阻塞模式下tx_flush错误修复
[components][serial_v2] activated使用原子API
[components][serial_v2] 优化DMA逻辑、没使能DMA时屏蔽DMA逻辑节约资源
[components][serial_v2] 提供写满时丢弃新数据和覆盖旧数据策略，写满丢弃策略效率更高
[components][serial_v2] 部分平台适配写满时两种策略功能
[components][serial_v2] DMA模式暂不支持丢弃新数据策略
[utest][serial_v2] 优化测试代码
[components][serial_v2] DMA模式下使用乒乓缓冲、DMA模式支持丢弃新数据策略
[utest][serial_v2] 适配DMA乒乓缓冲
[bsp][serial_v2] 部分bsp适配DMA下乒乓缓冲
[components][serial_v2] 使用spinlock替换中断，对部分结构体变量使用原子操作
[utest][serial_v2] 更新测试用例
[components][at] 适配new serialv2不再判断RTT版本号
[components][at] 删除多余的中文注释
[utest][serial_v2] 添加交叉echo示例，qemu环境下专用
[bsp][qemu] 适配串口v2并开启fifo
[components][at] 修复合并导致的错误
[bsp][n32] 适配serial_v2，没有经过测试
[components][serial_v2] 格式化代码
[utest][serial_v2] 删除无意义的打印
|
|
|
|
修复 #10182 GD32生成Cmake工程错误的问题
|
|
(#10190)
|
