|
Sync the HPMicro BSPs with hpm_sdk v1.13.0 and add the HPM5100EVK
(HPM5151) board.
- add the hpm5100evk BSP (board/startup/applications/Kconfig/docs) and
register it in .github/ALL_BSP_COMPILE.json, bsp/README.md and the
HPMicro READMEs
- re-sync the 11 existing boards (board/startup/debug scripts/linker
scripts/applications) with hpm_sdk v1.13.0, keeping the RT-Thread
specific parts: clock_time based drv_timer, CXX wired into the scons
environment, SConscript outputs under build/, named Kconfig choices,
rt_hw_us_delay in board_delay_*, board local codec files
- sync the shared driver layer with hpm_sdk v1.13.0 (GPTMRv2/PTMR,
PUART, soft I2C/SPI and the remaining peripheral driver updates)
- select the hpm_sdk v1.13.0 online package (PKG_USING_HPM_SDK_V113)
- use -Og instead of -O0 for the debug builds and print floats with the
RT-Thread klibc implementation instead of newlib nano
- initialize the RT-Thread heap before the SDK console init: the SDK
console_init() calls setvbuf(), which allocates through the C library
malloc() and tripped RT_ASSERT() in rt_smem_alloc() on the boards
built with RT_USING_DEBUG
- keep only ram_rtt.ld/flash_rtt.ld per board, align the DLM origin to
4KB on hpm5300evk/hpm5301evklite (the unaligned origin made the
linker emit a file backed PT_LOAD for the RAM area, which broke
"program rtthread.elf"), and anchor the generated .bin at the flash
base address 0x80000000
- sync the hpm6750evk openocd debug scripts with the new style used by
the other boards (hpm_common.cfg/hpm_reset.cfg with arp_halt)
- keep the upstream synced board/startup/libraries trees of bsp/hpmicro out of the
changed-file cppcheck run (same policy as bsp/hpmicro/.clang-format-ignore): the
check runs without the hpm_sdk include paths, so it reports ATTR_PLACE_AT and the
linker script symbol arithmetic in c_startup() as errors
- give the hpmicro boards in the changed-file scons trigger list the RV32 toolchain
they need (RISC-V-GCC-RV32) and add the matching installation step to that
workflow: the entries used sourcery-arm, which only provides the ARM toolchain,
so those legs could not find riscv32-unknown-elf-gcc
- keep hpm5100evk's ram_rtt.ld identical to the hpm_sdk v1.13.0
reference: the .fast_ram sections belong in DLM there (the DLM has
enough headroom), and that also makes its RAM and flash layouts agree
- skip the dependency pre-check when cleaning (scons -c): it runs from
DoBuilding() unconditionally, so a clean request with packages/ not
fetched yet was aborted with exit code 1 instead of cleaning
- make the manual scons trigger workflow runnable: it aborted while still
downloading actions because actions/upload-artifact@v3 is deprecated,
and scons was not on PATH because ~/.env/env.sh was never sourced.
Install tools/requirements.txt and source the Env PATH script in the
build step, and use @main action versions, as bsp_buildings.yml does
- start the LED demo thread only when rt_thread_create() succeeded
Tested:
- 12 boards x {ram_debug, ram_release, flash_debug, flash_release}:
48/48 clean builds
- flash boot + msh on hpm5100evk, hpm5300evk, hpm5e00evk, hpm6200evk,
hpm6300evk, hpm6750evk, hpm6750evk2, hpm6750evkmini, hpm6800evk,
hpm6e00evk, hpm6p00evk (list device/timer, ps, free, reset, rt_kprintf
float formatting)
- re-ran .github/workflows/manual_trigger_scons_except_STM32_all.yml with
the matrix reduced to the three hpmicro rows: all three legs build and
scons --dist succeeds with no local workarounds
|
